Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description & Requirements

Successful candidate will assist Project Manager on the following tasks:

• Site & project management and daily operations, routine/adhoc service work for industrial water treatment systems.
• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Site co-ordination, monitoring and report work progress.
• Liaising, negotiating and managing sub-suppliers/sub-contractors in the region with respect to procurements and in-situ execution of sales contracts or projects.
• Assist Project Manager to coordinate and communicate with end-user customers, local and regional suppliers for the production of deliverables as per contractual specifications and schedules.
• Compiling and handing over operation and maintenance (O&M) manuals to our end-user customers
• Any other duties given by Project Manager to support on projects.

Skills and Experience:

• Degree/Diploma in Chemical, Environmental or Mechanical Engineering.
• Preferably with 3-5 years of related experience in project management, project engineering, operations for industrial water treatment systems.
• Ability to read and understand specification, fabrication, erection, and standard engineering drawings.
• A team player that is willing to work with different age groups and nationalities.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
• Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
• Define, coordinate, perform and generate engineering test reports with limited supervision
• Technically lead and/or executes engineering projects, including development of key suppliers
• Implements concepts for variety of complex product issues and electrical solutions of difficult scope
• Generates electrical product specifications and reviews engineering documentation
• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Interfaces with internal and external customers regarding complex electrical issues for specific projects
• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Educational Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Mechanical Engineering or related engineering field

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Hands-on experience in electrical schematic diagram, PCB/ Low voltage circuit design for power and control
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful
• Good communication and interpersonal skills

Work Location

• Science Park II

Key Qualifications

• Proficiency in programming languages such as Java, Python, or JavaScript.
• Experience with cloud hosting platforms such as AWS, Azure, or Google Cloud Platform.
• Strong understanding of Kubernetes and containerisation technologies.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work effectively in a team environment.

Description
- Design, develop, and maintain full stack applications, with a focus on platform development and cloud hosting.

- Collaborate with multi-functional teams to define project requirements and deliver high-quality solutions.

- Implement best practices for software development, including code reviews, testing, and documentation.

- Optimise application performance and scalability through the use of Kubernetes and other cloud technologies.

- Develop and maintain deployment pipelines to automate the software release process.

- Stay up-to-date with the latest trends and technologies in software development and platform engineering.

Education & Experience

Bachelor's degree in Computer Science, Engineering, or related field.

Job Responsibilities:

• General encapsulation and optimization of the underlying framework; ensure the stability and efficiency of the underlying framework SDK, making it cross-platform and optimized for specific platforms.
• Transformation of algorithm application achievements; conversion of deep learning-related algorithm achievements, including detection, classification, segmentation, and other algorithms implemented based on the deep learning underlying SDK.
• Responsible for the creation and optimization of engineering algorithm strategies; design and implementation of engineering algorithm strategies for industry businesses based on the algorithm SDK; optimize engineering algorithm strategies for different application scenarios.

Minimum Qualifications:

• Bachelor's degree or above in computer science, electronics, or related fields.
• Proficiency in C/C++ development, solid programming skills, familiarity with common data structures and algorithms, object-oriented programming, and common architecture and design patterns.

Preferred Qualifications:

• Master's degree or equivalent experience in industry with in computer science, electronics, or related fields.
• Preference for those familiar with GPU programming, RTOS (NuttX, RT-Thread) and deep learning-related knowledge, image processing algorithms.
• Those with Android or iOS development experience are preferred.

Essential Skills:

• Excellent networking and interpersonal skills.
• Problem-solving, and analytical thinking.
• Highly organized, diligent with great attention to detail.
• Active listener, able to interpret and playback stakeholder requirements.
• Highly driven and able to work individually and as part of a team.

We regret to inform you that only shortlisted candidates will be contacted.

View more jobs : www.blueboxjobs.com

As a Field Engineer (C&S), you will be responsible for monitoring construction / maintenance activities. The incumbent should take steps to ensure that construction progresses as scheduled and that work specification are followed. Daily, the incumbent must inspect the construction site and coordinate delivery schedules with contractors.

You are also expected to perform the following:
• Maintenance of all Civil and Structural plant assets, including drainage systems and oil traps, insulation & cladding, coating, furnace refractory, etc. to ensure high plant availability and equipment integrity.
• Undertake all Civil and Structure maintenance activities related to Corrective and Preventive Actions and Management of Change (MOC) activities related to the Production Unit
• Assure that supervisors and inspectors adhere to the approved Inspection and Test Plans and project quality plans when conducting witness, inspection, and surveillance checks. Ensure Quality Control tests and checks are properly recorded and conform to project specifications, AFC drawings, and method statements.
• Ensure accuracy of approved construction drawings, documents and procedures for proper and correct construction execution.
• Provides good documentation to ensure all Civil and Structure drawings can be updated to reflect the latest changes.
• Ensure compliance to HSE standards and requirements to ensure that the Bukom Petrochemical Complex is a safe place to work in.
• Confirm day-to-day civil maintenance work and co-ordinate work details with contractors where appropriate.
• When required, to attend daily planning sessions with operations and confirm the schedule and procedures for safe and efficient execution of the job.
• Work with TA / SD (Plant Turn around / Shut down) leads & Planners to effectively integrate work scope into overall execution strategies in a TA / SD event.
• Execute the civil maintenance works using contractors.
• Assist Maintenance Manager in managing shutdowns and project works.
• Carry out any other related duties as required.
• Perform the role of an Authorized Permit Applicant and/or Authorized Engineer as per site Permit to Work (e-PTW) requirement.

Requirement:
• Degree/Diploma in Civil Engineering or equivalent.
• Min. 3 to 5 years civil engineering experience in construction or maintenance in oil and gas, chemical / petrochemical or related industries will be an advantage.
• Knowledge in local authority requirements e.g. the Building Construction Authority (BCA), Ministry of Manpower (MOM), etc.
• Knowledge or familiarity with Coating / Painting (NACE qualified), Insulation & Cladding and Refractory works will be an advantage.
• SAP (GSAP) knowledge in Maintenance Module will be an advantage.
• Experience in field work relating to interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Brown field experience and demonstrated ability to coordinate and interact with the run-and-maintain organization
• Ability to use business software, including Excel, PowerPoint, Word, PDF writer with proficiency in pivot tables and data interpretation.

Job Description

We are seeking a talented and experienced DevOps Engineer to join our dynamic tech team. In this role, you will be instrumental in designing, implementing, and maintaining the infrastructure that supports our rapidly evolving platform. You will collaborate closely with our development, QA, and product teams to streamline deployment processes, enhance system performance, and ensure the scalability and reliability of our services.

Key Responsibilities:

• Design, implement, and manage scalable, secure, and reliable infrastructure on AWS EC2.
• Utilize Docker, Kubernetes, and EKS for containerization and orchestration of microservices.
• Develop and maintain CI/CD pipelines using GitLab and ArgoCD to automate the build, test, and deployment processes.
• Integrate QA tooling into CI/CD pipelines, including Cypress for E2E testing.

Configuration and Automation:

• Implement Infrastructure as Code (IaC) using Terraform for efficient resource provisioning.
• Manage configuration management using Ansible to automate system configurations and deployments.

Networking and Security:

• Configure and manage load balancers using Traefik to ensure optimal traffic distribution.
• Implement service mesh technologies like LinkerD to manage service-to-service communication securely.
• Ensure infrastructure security and compliance with industry best practices.

Monitoring and Logging:

• Set up and maintain monitoring and alerting systems using tools like CloudWatch, Prometheus, Grafana, and Splunk.
• Proactively identify and resolve system issues to maintain high availability and performance.

Collaboration and Support:

• Work closely with development and QA teams to understand application requirements and ensure seamless integration.
• Provide support for development and staging environments, facilitating efficient testing and deployment cycles.

Optimization and Cost Management:

• Analyze system performance metrics to optimize infrastructure for cost and efficiency.
• Implement strategies for resource optimization without compromising on performance.

Requirements

• Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.
• Minimum of 3 years of experience in a DevOps or similar role.
• Proven experience with AWS services, particularly EC2, RDS, and networking components.
• Strong expertise in containerization using Docker and orchestration with Kubernetes.
• Past experience as a software developer is highly advantageous.
• Proficiency in setting up CI/CD pipelines using GitLab and ArgoCD.
• Hands-on experience with Infrastructure as Code tools like Terraform.
• Familiarity with configuration management tools such as Ansible.
• Knowledge of load balancing with Traefik and service mesh implementations using LinkerD.
• Experience with logging and monitoring tools, specifically Splunk.
• Scripting skills in Bash, Python, or Go for automation tasks.
• Understanding of microservices architecture and RESTful APIs.
• Familiarity with our tech stack is a plus: TypeScript, Go, ReactJS, ExpressJS,
• Gin-gonic, GraphQL with JWT authentication.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Excellent communication and interpersonal skills.
• Ability to work collaboratively in a fast-paced, agile environment.
• Detail-oriented with a focus on delivering high-quality work.

Preferred Qualifications:

• Certifications such as AWS Certified DevOps Engineer, Certified Kubernetes Administrator (CKA), or similar.
• Knowledge of Redis, MySQL, PostgreSQL, and Elasticsearch.
• Experience with QA tools integration, including Cypress and Pact.js.

Responsibilities:

1.Responsible for research and development of image generation technologies, including the development of foundational models for text-to-image generation, image editing techniques, image enhancement, and multimodal generation of text and images.

2.Keep up with the latest advancements in AIGC algorithms, be responsible for the research and development and engineering implementation of related technologies, and accelerate the adoption and optimization of cutting-edge AIGC technologies in business scenarios such as live broadcasting, short video, and instant messaging.

Requirements:

1.A Master's or Doctoral degree in computer vision, pattern recognition, machine learning, or related fields.

2.Some work experience in computer vision, deep learning, machine learning, computer graphics, etc, familiar with mainstream models and algorithms, and capable of following up and implementing new algorithms.

3.Strong engineering implementation ability, proficient in at least one deep learning framework (such as TensorFlow, PyTorch, etc.).

4.Good learning ability, teamwork, and communication skills.

5.Priority will be given to candidates with experience in GAN-related image generation and editing, video editing, style transfer, portrait editing, etc.

6.Priority will be given to candidates with experience in Stable Diffusion, ControlNet, DreamBooth, LoRA, etc.

7.Priority will be given to candidates who have published papers in internationally renowned AI conferences or have won awards in ACM competitions.

Job Description

Capabilities Development

*Lead the development and implementation of Group and partners OEMs’ (Original Equipment Manufacturers) new repair capabilities and report to the Industrialization Manager.

* Analyze technical data, gather market data, investment requirements to perform feasibility studies and Return on Investment.

* Perform self-assessments, engineering studies, build up justification file.

* Liaise with Quality for smooth airworthiness application for testing & repair capability integration.

*Liaise with the OEMs to clarify the requirements.

*Develop, source new equipment, consumables and chemicals and support investments linked to testing & repair policies.

* Drive the progress of the tasks, pilot projects’ milestones review with various stakeholders, report advancement, track investments and expenses, monitor contractors and suppliers, devise maintenance plans.

* Lead operations trainings and validation tests.

* Establish calibration requirements.

* Follow-up the testing & repair ramp-up with the workshops and support the Entry Into Service for new programs.

* Report to management. Flow down relevant and timely information.

Support & maintain new capabilities

* Coordinate with Product Support Engineer (PSE), and Operations personal to ensure optimal customer support.

* Assist the lead equipment maintenance when required.

* Implement systems or components modifications following notification of change related to CMM, Service Bulletins (SB) or Service Information Letters (SIL).

* Support workshop implementation of new requirements upon fleet upgrade and retrofit campaigns.

* Develop the Integrated Logistic Support at SEDSA levels.

* Help sourcing for material, suppliers, 3rd parties, alternatives.

* Review calibration requirements.

* Take a pro-active approach, initiate creative solutions to maintenance issues and assist the workshops in implementing best practices, Continuous Improvement, LEAN operations, cost

reductions and applying lessons-learned from previous or bench-marked experiences.

* Ensure that communication between all stakeholders, Head Quarter, OEMs, Workshops, Quality, Sales, Continuous Improvement, Supply Chain, Customers, Suppliers, is optimum.

* Ensure SEDSA contract terms & conditions are understood & satisfied. Pro-actively manage contractual issues with 3rd Parties and suppliers.

* Report to management. Flow down relevant and timely information.

Profile & Soft Skills

* Be rigorous and organized, able to handle multi-tasking and priorities.

* At ease to report and present progress through regular reviews with the management.

* Develop excellent relationships across multiple organizations & with all levels of workshops and other Company personnel.

* Safeguard interest of SAFRAN Electronics & Defense Services Asia (SEDSA) and partners OEMs.

Health, Safety & Environment

* Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

* Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

* Actively participate and contribute to 5S initiatives.

Continuous Improvement and Innovation

* Lead by example the Continuous Improvement and Innovation initiatives in the company.

* Implement innovations.

* Pilot Company Lean and Improvement projects. Review progress, deliverables and gains for key innovations.

* Be a driving force in the Participative Innovation, ONE SAFRAN and Green Belts Improvement

* Spearhead the QRQC, SQCDPI, 5S, Root Cause Analysis, ONE SAFRAN methodologies to be best in class.

* Perform any other duties as assigned.

Experience and Qualifications:

a) Degree in Mechanical/Electrical/Aeronautical Engineering

b) At least 3 years of Aviation Engineering experience, Technical Support Aircraft Maintenance and Repair Operations, in OEM or MRO environment

c) Proficient in product support and trouble shooting procedures

d) Hands-on experience on design and wiring of electronics test fixtures.

e) Experience in OEM technical support, or related MRO operations/engineering

f) Must be familiar with technical support environment, processes, and manuals used for aircraft maintenance. Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

g) Effective Project Management and interpersonal skills

h) Experience in calibration requirements and procedures

i) Proficient with Microsoft software applications

j) Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

k) Sound knowledge of quality systems such as ISO9000 and AS9110

l) Excellent attitude, good team player, motivated, driven, committed, reliable. Take ownership of the projects

m) Ability to multi task in a dynamic environment

n) Excellent communications skills. Well versed in written and spoken English

o) Able to think ahead, process data, make decisions and solve problems.

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

We are hiring Marine Engineer and we welcome new graduate to join us.

We are looking for someone who has:

• Bachelor’s Degree in Marine Engineering, Electrical Engineering or equivalent.
• Only Singaporean / PR needs to apply.

Competencies you will bring:

• Proficient with engineering software; AutoCAD.
• Proficient with Microsoft Word, PowerPoint, and Excel.
• Ability to work independently as well as in team.
• Good oral and written communication skills in English language.
• Motivated to facilitate and contribute to the company’s growth.

Roles and Responsibilities

• Responsible for efficient delivery of AutoCAD drawings, reports, and other deliverables as required by the directors.
• Provide engineering and project management support for assigned projects.
• Provide document control and ensure document handling. Update and revise documents / folders as required.
• Contribute to a positive and professional working environment.
• Perform other related tasks that may be required from time to time.

As an equal opportunities’ employer, we offer a competitive remuneration and generous benefits package, commensurate with qualifications and experience.

If you are keen to take up this rare opportunity and challenge, please send in your CV to [email protected].

Connect with us on LinkedIn.

Website: www.m3marine.com.sg

About the Role

As a Platform Engineer (Oracle Tuxedo Developer), your role is to design, develop, and maintain distributed applications using the Oracle Tuxedo middleware platform.

Job Description:

• Designing and developing distributed applications using the Oracle Tuxedo middleware platform.
• Writing efficient, scalable, and reliable code in programming languages such as C, C++, Java, or COBOL to implement application logic.
• Configuring and managing the Oracle Tuxedo environment, including setting up application servers, managing resources, and optimizing performance.
• Collaborating with cross-functional teams, including business analysts, system administrators, and database administrators, to gather requirements, design application architecture, and ensure seamless integration.
• Developing and maintaining documentation for applications, including code comments, technical specifications, and system configurations.
• Performing unit testing, debugging, and troubleshooting to ensure the applications meet functional and performance requirements.
• Conducting performance tuning and optimization of Oracle Tuxedo applications.
• Keeping up to date with the latest Oracle Tuxedo platform updates, technologies, and best practices in distributed application development.
• Providing technical support and guidance to other team members and stakeholders.
• Participating in code reviews and ensuring adherence to coding standards and software development best practices.

Qualifications:

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Proven experience in developing distributed applications using Oracle Tuxedo middleware platform.
• Strong proficiency in programming languages such as C, C++, Java, or COBOL.
• Experience in writing unix shell scripts.
• Familiarity with middleware concepts, distributed computing, and service-oriented architecture (SOA).
• Experience in performance tuning and optimization of Oracle Tuxedo applications.
• Knowledge of database systems and SQL.
• Excellent problem-solving and debugging skills.
• Strong communication and teamwork skills.
• Ability to work independently and manage multiple priorities in a dynamic, deadline-driven environment.

Infrastructure Engineer

Job Description:

• Operate, manage, and maintain VMWare ESX and HCI technologies

• Knowledge of administering Windows Server 2016, SQL 2016 and Windows Clustering technology

• Red Hat administration

• Plan, coordinate, and execute product installations, product upgrades, patch installations and hot fix installations

• Create, manage, and maintain documentation related to the managed systems and operation

• Perform hardening benchmarks adhering to defined procedure and checklist. Maintain the infrastructure in such a way that it is secure against unauthorized access.

• Deploy and deliver the project deliverables as stated in the project scopes extracted from the proposal/contract.

• Update the Infrastructure team lead on the project progress and status.

• Implement changes through Change Management Process on system components. Ensure change impact is evaluated, contingency plan and test plans are created to support the change request.

• Build, configure, and rollout new releases through Release Management Process on system components that affect operations. Organize training for new releases where necessary.

• Identify, isolate, resolve, escalate and close incident/problem ticket according to ITSM Incident/Problem Management Process.

• Ensure backup and recovery of system components is carried out, so that critical services can continue in the event of a disaster.

• Perform daily system health check

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Computer Science/Information Technology, Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

• At least 3 year(s) of working experience in the related field is required for this position would be advantageous.

• Preferably possess certifications such as Microsoft MCITP, VMWare certified professional or equivalent

• Full-Time position(s) available.

Job description and responsibilities

• To assist Project Manager on coordination work, planning and monitoring site's workforce and multi-disciplinary works from inception to completion, inclusive of project documentation, plans and reports etc.
• To ensure that the project runs smoothly by tracking project progress, effectively and accurately communicate relevant project information to the client, Management and Project Team.
• To ensure all project requirements are within the standards & control of the project management plan.
• To Liaise with the general workforce involved in the project.
• To assist Project on samples and materials preparation etc.
• Willing to learn and accept add-ho job resposibility.

Job Requirements

• No working experience requried .
• Self-motivated and able to work independently and under pressure.
• Well versed in Microsoft Office,particularly WORD and EXCEL applications.
• Strong communications skills,tactfulness, integrity, good inter-personal skill.
• Immediate availability preferred.

Job Title: Validation Engineer

Location: Singapore

Start Date: January 2025

Duration: 1 year (Renewable contract)

NES Fircroft has partnered with our client, a leading pharmaceutical company dedicated to innovation and quality in healthcare, to seek a Validation Engineer to join the team.

POSITION RESPONSIBILITIES:-

· Ensure equipment for qualification meet the company’s requirement.

· Establish performance and quality criteria by outlining the SIA/URS/FRS/DS/FMEA

· Work with cross function team to develop the IQ/OQ/PQ/PV

· To upload protocols to M-Files for approval.

· To execute IQ/OQ/PQ/PV

· Ensure compliance with safety and quality standards

· Collaborate with cross functional team personnel on projects.

QUALIFICATIONS:-

· 1 year of experience as a validation engineer.

· Open to Fresh Graduates as well.

· Training will be provided by the in-house team.

Hiring Position

Platform Engineer (Gaming)

Roles & Responsibilities

• Responsible for business system requirement analysis, architecture design and development
• Mentor and manage engineers and ensure high technical quality and personal growth
• Be involve in entire life cycle of data projects right from the beginning of requirement gathering, design, development to deployment in production.
• Oversee project engineering plans, delivery and provide technical leadership for the engineering teams
• Oversee tools development with technical artists, artists and designers
• Ensure the best performance, quality, and responsiveness of applications and games
• Establish effective strategies and development pipeline
• Analyzing the threads and identifying the bottlenecks in mapping, increasing the buffer sizes of transformations according to the incoming data
• Lead UI/UX design discussions and provide expertise in best practices and patterns.
• Translate business/game requirements into technical specifications
• Design and implement game mechanics and UI according to design specifications
• Be involved in ad-hoc projects where required

Requirements

• Minimum Diploma in Information Technology, Computer Science or equivalent professional qualifications is required
• Technical track record working closely with engineering / technical teams
• Passion for working with the games industry to bring AAA titles to market
• Minimally 5 years of game development experience, including 2 years in a leading or senior level role
• Game development experience using Unreal Engine or other equivalent game engines preferred
• In-depth knowledge of full lifecycle game programming and related experience in rendering and 3Cs
• Highly proficient in programming languages, such as C++, C# and Java
• Fluency in English and Mandarin to communicate technical jargons with mandarin speaking vendors and stakeholders

The above details has been composed to provide an overview of the general requriements, nature and level of the work performed by this position. It is not intended to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

The Employer adhere with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of their age, race, religion, nationality, marital status, or family responsibilities. A more detailed discussion of the TGFEP is available on the Tripartite Alliance for Fair and Progressive Employment Practices (TAFEP) website at https://www.tal.sg/tafep.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/curriculrm vitae. Upon doing so, by submitting this or disclosing your personal information in connection with your job application, you are deemed to have read and agreed to the terms of our Privacy Policy, and consented to the collection, use and disclosure of your personal data by us, in accordance with our Privacy Policy. Please access our website for a copy of our Privacy Policy

We regret that only shortlisted candidate will be notified.

EA License No.: 21C0611

Job Description:

• Conduct User Acceptance Testing (UAT) on existing products, drivers, and firmware.
• Perform various testing types, including functional, regression, performance, and sanity testing, to ensure product quality.
• Collaborate with internal teams such as project leads, developers, and other team members to address bugs and improve product quality.
• Work closely with the R&D team to replicate customer-reported issues and verify fixes.
• Track, isolate, and document problems, verify resolutions, and qualify bug fixes.

Job Requirements:

• Diploma or Bachelor’s degree in Engineering, with an interest in the testing field.
• Strong problem-solving skills, with an ability to troubleshoot effectively and think outside the box.
• Detail-oriented and observant, with the ability to spot discrepancies during testing.
• Analytical mindset for accurately assessing product behavior.

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Xie Jiani (R1548854)

EnviroDynamics Solutions Pte Ltd

EA License No.: 12C6285

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences in manufacturing industry
• have relavant degree/diploma
• 
  
• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Design systems and components that meet needs and requirements
• Produce outline designs
• Conduct experiments methodically, analyse data and interpret results
• Test and evaluate theoretical designs
• Identify, formulate and produce effective solutions to emerging problems
• Evaluate final product’s overall performance, reliability and safety
• Alter and modify design to meet requirements and to eliminate malfunctions
• Estimate budget and scope of project
• Solicit observations from operators
• Prepare product reports and documentation
• Engage in lifelong learning and develop new theories or methods

JOB DESCRIPTION

We are looking for a Systems Engineer to maintain, upgrade and manage software, hardware and networks. Resourcefulness is a necessary skill in this role. You should be able to diagnose and resolve problems quickly. You should also have the patience to communicate with a variety of interdisciplinary teams and users. Your goal will be to ensure that our client’s technology infrastructure runs smoothly and efficiently.

Your responsibilities include:

· Manage network servers and technology tools

· Set up accounts and workstations

· Monitor performance and maintain systems according to requirements

· Troubleshoot issues and outages

· Ensure security through access controls, backups and firewalls

· Upgrade systems with new releases and models

· Health check reporting

JOB REQUIREMENTS

· Minimum Diploma in Information Technology, Computer Science or a related discipline; professional certification (e.g. Microsoft Certified Systems Administrator (MCSA)) is a plus

· At least 2 years’ experience in similar capacity as a System Administrator, network administrator or similar role.

REQUIRED SKILL-SET

· Experience with networks (LAN, WAN) and device patch management

· Knowledge of system security (e.g. intrusion detection systems) and data backup/recovery

· Familiarity with various operating systems and platforms

· Resourcefulness and problem-solving aptitude

· Excellent communication skills

Objective / Purpose of the Job

· To design and develop electrical/electro-mechanical systems for a new machine

· To improve electro-mechanical system of existing machine

Key Activities / Accountabilities

· Do detailed calculations to develop manufacturing, construction, and installation standards and specifications for electro-mechanical modules in machine

· Develop, manufacture, integrate, and test of electro-mechanical modules to ensure that products meet specifications and codes

· Develop, manufacture, integrate, and test of opto-electronics modules of instrumentation

· Investigate complaints from customers or the public, evaluate problems, and recommend solutions

· Work with project managers on production efforts to ensure that projects are completed satisfactorily, on time, and within budget

· Other duties as assign

· Maintain design and development documentation using CAD

Preferred Qualifications, Experience and Skills

Qualification:

· Diploma/degree in engineering course

Experience:

· At least 2-5 years relevant experience in Semiconductor industry,

· New graduates with active learning attitude are welcome

Technical Skills:

· Knowledge of electro-mechanical system design, power supply management, IO sensor, encoder and motion control

· Knowledge of computer control and controller electronics

Competencies:

· Communication capability with all levels

· Interpersonal skills

· Planning and organising

· Drive for results

· Analytical skills

Language Capability:

· Proficiency in spoken and written English & Chinese language required

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Instrumentation or a related field
• 6 + years of experience in instrumentation and control system design, analysis, and implementation
• Proficiency in using CAD software for control system design
• Experience with control system programming and software tools such as PLC programming, DCS programming, or SCADA systems
• Knowledge of codes, standards, and regulations related to instrumentation and control systems,
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Experience with industrial processes and equipment, such as pumps, motors, and valves

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Responsibilities:

• Develop, refine, and implement state-of-the-art algorithms for product research and development or solutions via ensemble or artificial intelligence model workflow.
• Build APIs to host models as a microservice / container
• Perform architectural/technical design, technical prototyping, development, and reviews of sophisticated data/algorithmic pipelines
• Communicate and negotiate technical/analytical solutions and architectural designs with diverse stakeholders
• Staying abreast of developments in data science
• Write Technical Documentation

Requirements:

• At least 3 years of experience working with Python, Pytorch and TensorFlow or relevant experience in data science team where the analytical solutions are deployed/integrated into mature production systems.
• Experience with

1. Univariate and multivariate Linear models, machine learning and deep learning models.
2. Machine learning Operations (MLOps):
3. Exploratory data analysis (EDA)
4. Data Prep and Feature Engineering
5. Model training and tuning
6. Model review and governance
7. Model inference and serving
8. Model monitoring
9. Automated model retraining

Work location: near Jurong East MRT

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

· Design mechanical and electro-mechanical components.

· Integrate mechanical and electro-mechanical components into subsystems and assemblies.

· Perform system packaging and high-level assembly modeling.

· Perform interference analysis, design, and review designs per safety codes.

· Analyse and respond to issues found at supplier or manufacturing sites during manufacturing assembly, integration, and test.

· Develop or modify parametric 3D models and 2D drawings of designs including any mechanical routings as required.

· Perform geometric dimensioning and tolerance with capabilities at a level1 certification level.

· Release drawings and modify drawings using CAD tools.

· Complete other engineering documentation if required concomitant with design release.

· Conduct lab testing / evaluation of components if required.

· Communicate with counterparts in Asia, Europe, and USA on a regular basis for various engineering projects.

· Work with R&D team and identify new innovations and engineering research.

· Create and maintain task calendar outlining engineering projects, results and provide reports as required.

· Advise whether the product has a market demand and provide data analysis.

· Must be able to work independently and in teams, handle multiple tasks and able to work to a high standard in an environment where tight timelines / deadlines are normal course.