Job Description & Requirements

· Compile technical & commercial offers in accordance with customers’ requirements for tender submission in close coordination with the service business unit.

· Submitting / presenting clarifications and pre-order negotiation (technical & commercial) with customers.

· Calculating total cost of project and establishing a tendering budget (time, resources and expenses).

· Coordinate with all parties involved (internal & external) in the presentation of proposals.

· Prepare technical & commercial proposal.

· Monitor all phases of project through various reports and communicate to customers.

· To liaise with customers effectively and carry out continual improvement.

· Technical report writing skill must be good includes ability to hand sketch detail on mechanical parts.

· Creativity in providing solutions and ability to seek information.

· Supervise skilled employees to ensure jobs are done satisfactorily.

· Responsible for developing and implement effective maintenance and engineering solutions for equipment problems.

· Site supervision and monitoring work progress from commencement to handover of the project.

· Advise management on projects progress.

Requirement

· Diploma/ Degree in an Engineering discipline, preferably in Mechanical / Electrical.

. Able to commit ad-hoc duty.

. Work in semiconductor before is prefered

Job scope –

- Provide guidance to process technicians on key parameters, plant operating instructions, equipment preparation for maintenance, process troubleshooting, operating plans, and safety concerns.

- Supports process control and data systems such as distributed control system (DCS) and plant information monitoring system.

- Conduct process evaluations, technical feasibility studies, process trend analysis, and provide technical leadership for the continued operation of the facility.

- Support the Commissioning Team during plant start-up, performance test, optimization and prepare documentation.

- Prepare and review Standard Operating Procedure, PFDs, P&IDs, material, quantity, heat and mass balances, utility and consumable balances, and technical data sheets for major equipment items.

- Provide the required technical support as technical lead in the plant reliability and productivity improvement projects.

- Liaising with the operation team in the control room on a daily basis.

- Ensure safety at the sites through compliance to safe operations and practices at all times.

- Liaise with authorities with regards to all matters with proper documentation.

Requirement

- Minimum Bachelor Degree in chemical engineering or petrochemical engineering.

- 2 years’ working experience in a petrochemical plant or oil refinery is an advantage.

- Strong knowledge of chemical process, and chemical process safety handling.

- Good interpersonal and communication skills, excellent spoken and written skills.

- Exceptional problem solving and analytical skills.

- Basic knowledge of AutoCAD and any other CAD design software is desirable.

- Able to work independently and a multitasker.

• Drawings Review (P&ID & Isometric): Analyse piping schematics to verify that installation conforms to design standards, process flow, and piping isometrics for accurate fabrication. Cross-check that the system follows design specifications, noting discrepancies for correction.
• Material Inspection & Verification: Ensure all piping materials, fittings, and consumables meet ASME standards and project specifications through mill certificates and visual checks. Ensure material traceability by confirming that materials match project specifications and certifications (e.g., ASTM standards, material grades, heat numbers).
• WPS/PQR Compliance: Review and verify that Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) are qualified and comply with ASME Section IX, ensuring correct application on site. In PQR to ensure to verify for mechanical testing (Tensile, Impact, Bend, etc)
• Welding Process Monitoring: Oversee the welding process to ensure it complies with the qualified WPS, monitoring essential variables such as pre-heat, inter pass temperature, and welding technique.
• Check for any deviations from the approved welding procedures, ensuring proper filler materials, joint configurations, and weld sequences are used.
• Welder Qualification: Verify the qualification of welders by confirming that they meet the requirements outlined in ASME Section IX for the specific processes and materials they are working on. Witness welder qualification tests and maintain records of each welder's performance for the specific weld types and materials.
• Welding Joint Inspection: Inspect welded joints for conformity with welding symbols, dimensions, and tolerances as per engineering drawings and ASME Section IX requirements, ensuring correct joint preparation and quality.
• NDT Supervision: Supervise non-destructive testing (NDT) methods such as radiographic testing (RT), ultrasonic testing (UT), magnetic particle testing (MT), and dye penetrant testing (PT) to assess the integrity of welds according to ASME acceptance criteria table.
• Piping Fabrication & Installation Inspection: Inspect piping fabrication for correct fit-up, alignment, and installation as per project drawings and standards, checking pipe supports, alignment, and joint integrity.
• Pressure Testing: Witness and approve hydrostatic or pneumatic pressure tests on piping systems, ensuring that the pressure holds for the designated duration as per the ASME code and client requirements. (Hydrostatic Test, Pneumatic Test, etc). Review and sign off on pressure test reports, ensuring that all safety and procedural guidelines were followed during the testing.
• Documentation Control: Ensure proper documentation control, including test reports, inspection records, and welding logs, for creating and maintaining the piping test package, ensuring traceability and compliance.
• Communicate regularly and closely with clients or contractors to provide updates on quality control, inspections, and test results. Ensure all piping-related documentation, such as material certificates, welder qualifications, NDT reports, and test packages, are properly maintained and meet the required standards for final handover.

Purpose:

GSK Tuas are looking for an Engineer who can join the project and commissioning phase of our new facility. The candidate will join at an exciting time for the site and will bring expert knowledge across some of the below Utilities and/or HVAC disciplines. After the project the candidate would remain responsible for some systems listed below.

The Project phase will require close work with the design and construction team and technicians to:

• Review and familiarization on Process equipment's (PID's, lay outs and block diagrams).
• Execute and review SAT/FAT/IQ/OQ/PQ protocols/reports
• Review of documentation (SOP's, WRA, Risk Assessments)
• Review and generation of maintenance plans

Following the project, the candidate will remain accountable for the designated system and would be accountable for:

• Safety: Ensure all maintenance activities are carried out safely. Maintain awareness in SEHS within Technical Services and strive for improvements.
• Quality: Ensure that all Engineering and maintenance activities are carried out in compliance with Engineering Standards and Procedures. Lead key Quality improvement projects. Assist and lead investigations and CAPA
• Reliability: Assure reliability of plant equipment and systems by managing team to implement conditioning monitoring and methods, conduct equipment measurement and improvement on repeating failure; evaluate/analyze data/results, provide recommendation and follow up monitoring
• Continuous improvement: Drive continuous improvement by providing recommendation and initiative to promote sustainability.

Responsibilities:

The systems listed below are currently in use on site. Candidates who can bring knowledge and experience across a selection of the following systems should apply:

Clean utility system:

• Purified Water Generation
• Purified Water Storage and Distribution
• Water-for-Injection Generation
• Water-for-Injection Storage and Distribution
• Pure Steam Generation and Distribution
• Technical Gases and chemical distribution
• HVAC and Cleanroom systems

Black utility system:

• Cooling Tower
• Steam Boiler
• MVAC Boiler
• Glycol Chillers
• Air Compressors
• Air Dryer
• Liquid Nitrogen Package
• Trigeneration

Knowledge, Skills & Experience :

• Min 4 years of engineering experience with degree in engineering or min 6 years of engineering experience with diploma in engineering
• Min 2 years of technical experience in Bio/Pharma industry with degree or min 3 years of technical experience in Bio/Pharma industry with diploma
• Experience in GMP and safety practices
• Highly knowledgeable and competent in their field of work.
• Strong technical knowledge and well verse in all technical aspects.
• Substantial fault-finding and trouble-shooting experience.
• Strong leadership in team management.
• Good analytical skill in investigation.
• Lead complex issues investigation and detailed troubleshooting.
• Good interpersonal skills.
• Good oral and communication skills.
• Customer focus and result oriented.
• Good people management and coaching skills.
• Good teamwork.
• A strong leader and think out of the box.
• Excellent regulatory knowledge.
• Integrity and Innovative.
• Problem solving skill.
• Analytical thinking skill.
• Facilitation and organization skill.
• Good time management.

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Staff Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 8 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators.
• Collaborative Coordination Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience: Min10 years of QAQC experience with at least 3 years in a leadership/supervisory.
• Skills: Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for fresh graduate software engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

Fresh graduates welcome to apply for entry level positions.

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Senior Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 4 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

You will develop and implement individual network solutions and you excel when it comes to

troubleshooting. Occasionally, you will support the sales department as technical pre-sales Subject

Matter Expert (SME) and you will answer all questions related to the technical specifications, features of

the products, designs, and solutions. You will develop, document, present, implement, and fine-tune

network solutions. Furthermore, you will empower our customers in making informed decisions by

developing workshops and trainings and conducting them onsite at their location.

YOUR RESPONSIBILITIES:

• Engage customers and vendors to deliver a fit-for-purpose and future-proof solution design

that meet their business objectives, adhering to project delivery framework and vendors’

product lifecycle.

• Develop and implement infrastructure projects adhering to project scope of work, timeline,

budget, with quality.

• Develop concise project documentation such as Low-Level Design,

Migration/Implementation MoP, User Acceptance Test, User Guide documents.

• Assist Sales or Solution Architect to provide technical specifications, Scope of Work, effort

estimation in responding to customer’s request or RFP process.

• Act as solution expert to support issue resolutions for project issue escalation that

impacting deliverables, quality, or timeline.

• Provide technical expertise to other team members, as well as with other avodaq teams in

Singapore and globally.

• Keep up to date with the latest technology products in network infrastructure, to provide

high-quality support in current and future services.

YOUR PROFILE:

• IP experience includes:

o Cisco Catalyst, Cisco Nexus, Cisco ASA, Firepower, IOS, and ISR Routers

o NGFW with Fortinet, Palo Alto, or Checkpoint Firewall

o WAN & Routing (OSPF, EIGRP, IS-IS, BGP)

o Switching Technologies (STP, VLAN, VXLAN)

o Network Authentication (ISE, 802.1x, Radius, Active Directory, Posture, Profiling)

o Network Design

o QoS

o Wireless Technologies (WLC, WLM, 802.11ac, WMM, PEAP, TLS, Site Survey)

o AI/ML delivered Assurance with Catalyst Center

o Network performance measurement and monitoring such as Cisco Prime, Solarwinds,

MRTG, PRTG

• System experience includes:

o Linux/Unix

o Microsoft Windows Active Directory, DNS, DHCP, and MS Server

o Virtualization (VMWare, Hyper-V)

o Cloud experience with AWS, Azure or GCP will be an added advantage

• CCNA or CCNP certification

• 3 - 5 years’ experience in field or service engineering, specifically on network, wireless, and

network security projects

• Fluency in English and Chinese (both written and spoken)

• Pronounced communicative and presentation skills

• Ability to work in a team

• Travel readiness

OPPORTUNITIES:

avodaq IT consultants are among the best in the IT industry. The unique combination of consulting and

projects work offers many possibilities to continuously enhance your professional knowledge. The

position entails the possibility to become a Senior/Principal Consultant. To qualify for a higher position,

you will among other things, pass the CCIE examination.

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.
• Collaborative Coordination : Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed Phase Assist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.
• Analytical Skills and Problem Solving : Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role. Min of 2 FPSO/FSO Projects Completion.
• Skills : Proven track record with strong coordination skills. Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2).

Responsibilities

• Provide analysis and dispositions on non-conformance products in accordance to requirements
• Perform inspection and verification (visually or using measuring tools) on product on hold due to quality issues
• Work closely with supervisor & team to monitor project status and closures (team coordination)
• Communicate with customers status of quality projects assigned to his/her area of responsibility
• Prepare regular reports and meet submission deadlines (weekly, monthly)
• Actively participates with internal team projects analysis

Requirements

• Degree in Electronics or Engineering or related field with relevant experience in electronics / semiconductor / or other manufacturing industry
• Entry level candidates are welcome to apply
• Basic knowledge in Microsoft Office (Word, Excel, PowerPoint)
• Team player with good written / verbal communication and interpersonal skills
• Strong sense of urgency with ability to meet deadlines and work independently
• Knowledge in basic manufacturing solving problem tools (8D, FMEA) and statistical tools (SPC) is an advantage.
• Highly motivated to learn new skills / systems / analytical tools used in manufacturing operations

Job Title: Desktop Engineer (Mandarin-speaking)

Location: Tuas, Singapore

Job Type: Full-time

About Us: Techedge Solution, a leading IT Staffing & Data centre solutions provider, seeks an experienced and skilled Desktop Engineer to join our IT team.

Job Summary:

We are looking for a highly skilled and customer-focused Desktop Engineer to provide technical support for our desktop infrastructure. The ideal candidate will have excellent problem-solving skills, strong communication skills in Mandarin, and experience working in a fast-paced environment.

Responsibilities:

• Provide level 2 technical support for desktop-related issues
• Install, configure, and troubleshoot desktop hardware, software, and peripherals
• Manage and maintain desktop images, group policies, and software updates
• Troubleshoot and resolve issues related to Microsoft Office, Windows, and other applications
• Collaborate with IT team members to resolve technical issues
• Communicate technical information effectively to non-technical stakeholders
• Conduct hardware and software inventory management
• Perform routine maintenance and upgrades
• Adhere to IT security policies and procedures

Requirements:

• Diploma or Degree in Computer Science/Information Technology
• 2+ years of experience in desktop support/engineering
• Proficient in Windows, Microsoft Office, and desktop hardware
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal skills (Mandarin-speaking)
• Ability to work independently and as part of a team
• Familiarity with ITIL framework (desirable)

Nice to Have:

• Certification in CompTIA A+, Microsoft MCSA, or equivalent
• Experience with desktop management tools (e.g., SCCM)
• Knowledge of IT security best practices

Working Hours:

• Monday to Friday, 9:30 am - 6:00 pm

What We Offer:

• Competitive salary
• Comprehensive benefits package
• Opportunities for professional growth and development

How to Apply:

If you're a motivated and tech-savvy individual with excellent Mandarin communication skills, please submit your resume to [email protected] We look forward to hearing from you!

Job Summary:

The Lead Electrical Engineer will be responsible for the design, development, and management of electrical systems for FPSO projects. This role involves leading a team of engineers, ensuring the safe and efficient design and operation of electrical systems including power generation, distribution, and control systems on FPSO vessels. The Lead Electrical Engineer will ensure all work complies with project specifications, industry standards, and safety regulations.

Key Responsibilities:

• Lead the electrical engineering design for FPSO projects, including power generation, distribution, control, and communication systems.
• Ensure compliance with industry standards (IEC, IEEE, NEC), client specifications, and regulatory requirements (ABS, DNV, Lloyd’s Register).
• Supervise the selection, specification, and installation of electrical equipment such as transformers, switchgear, motors, generators, and lighting systems.
• Collaborate with multidisciplinary teams (process, instrumentation, mechanical) to ensure seamless integration of electrical systems into overall FPSO operations.
• Review and approve electrical design documentation, including drawings, calculations, data sheets, and technical specifications.
• Oversee the testing, commissioning, and troubleshooting of electrical systems, ensuring optimal functionality and safety.
• Develop and implement electrical system maintenance strategies for FPSO operations to ensure long-term asset integrity.
• Manage electrical engineering teams, including mentoring junior engineers and ensuring efficient resource allocation.
• Conduct risk assessments and ensure all electrical systems adhere to HSE (Health, Safety, and Environment) guidelines and safety standards.
• Liaise with external stakeholders, including clients, vendors, and regulatory bodies, to ensure compliance with project objectives.
• Provide technical support during the construction, installation, and commissioning phases of FPSO projects.
• Stay updated with technological advancements in electrical systems and apply innovative solutions to improve performance and efficiency.

Qualifications:

• Bachelor’s degree in Electrical Engineering or related field (Master’s preferred).
• A minimum of 10 years of experience in electrical engineering, with at least 5 years in a lead role, preferably within the oil and gas industry and FPSO projects.
• Strong knowledge of FPSO electrical systems, including high-voltage and low-voltage systems, power distribution, and control systems.
• Proficiency with electrical engineering software (e.g., ETAP, AutoCAD, or similar tools).
• Familiarity with international standards (IEC, IEEE, NEC) and classification society rules (ABS, DNV, Lloyd’s Register).
• Strong leadership, communication, and project management skills.
• Excellent problem-solving abilities, with experience in troubleshooting complex electrical issues in offshore environments.

Job Responsibilities:

1. Manage on going project, electrical work, testing & commisioning.

2. Site walk and prepare quotation.

3. Project execution, schedule planning, material preparation.

4. Manage site installation team.

5. Attend client meeting and reporting.

Requirement;

1. Minimum Diploma in electrical, automation.

2. Have experince in contruction semi conductor sector.

3. Willing to work on emergency schedule.

Job Description & Requirements

Job Description & Responsibilities

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus:Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators;Involve in Quality Walks during site quality surveillance when requiredAssist to manage the project lessons learned and initiate improvements and ensure experience transfer.
• Collaborative Coordination: Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements:

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role.Min of 2 FPSO/FSO Projects Completion.
• Skills : Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicatorExcellent collaborator with cross-functional teamsIn-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Control and instrumentation (C&I) engineers are responsible for designing, developing, installing, managing and maintaining equipment which is used to monitor and control engineering systems, machinery and processes

Your job is to make sure that these systems and processes operate effectively, efficiently and safely.

You might work for companies who manufacture and supply the equipment or for the companies who use it, such as nuclear and renewable energy companies and environmental agencies.

You will need a thorough understanding of the operational processes of an organisation as your role is multidisciplinary, working closely with colleagues across several functions, including operations, purchasing and design.

Responsibilities

You'll need to develop skills in specific control disciplines, such as:

• advanced process control (APC)
• distributed control systems (DCS)
• programmable logic controllers (PLC)
• supervisory control and data acquisition (SCADA).

The use of these disciplines will depend on your job. In general however, tasks and responsibilities can include:

• designing and developing new control systems
• testing, maintaining and modifying existing systems
• analysing data and presenting findings in written reports
• managing operations
• working collaboratively with design engineers, operation engineers, purchasers and other internal staff
• project management within cost and time constrained environments
• providing advice and consultancy support
• purchasing equipment
• developing new business proposals.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Principal Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 12 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus : Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators;Involve in Quality Walks during site quality surveillance when required Assist to manage the project lessons learned and initiate improvements and ensure experience transfer.
• Collaborative Coordination: Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving: Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Lead and supervise a group of Technicians/Technical Assistants and manage contractors in the execution of refinery maintenance activities.
• Implement reliability programs and develop maintenance procedures for instrumentation & electrical equipment to facilitate consistent execution of maintenance tasks.
• Investigate instrument & electrical equipment failures or malfunctions in order to identify root causes of problems as well as recommend and implement solutions.

• Degree in Electrical and Electronics Engineering.

• 2 years' relevant experience in oil refinery/petrochemical or related industries. Candidate without relevant experience may be considered for entry-level position.
• Knowledge of DCS, PLC and ESD systems is preferred.

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actionsReview, comment and approve Subcontractor / Supplier documents based on Company and Project requirements.
• Collaborative Coordination: Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specificationsAssist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.
• Analytical Skills and Problem Solving : Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Involve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role.,Min of 2 FPSO/FSO Projects Completion.
• Skills: Proven track record with strong coordination skills ,Excellent planning and organizing skills. ,Excellent communicator ,Excellent collaborator with cross-functional teams ,In-depth knowledge of quality management system (ISO 9002, API Q1/Q2).
• Education : Relevant Engineering or related Technical Degree.

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus:Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators Involve in Quality Walks during site quality surveillance when requiredAssist to manage the project lessons learned and initiate improvements and ensure experience transfer.
• Collaborative Coordination : Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements:

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role ,Min of 2 FPSO/FSO Projects Completion.
• Skills: Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicatorExcellent collaborator with cross-functional teamsIn-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Applicants who are interested to apply for the position, please apply via this link : Find A Job | Careers@Gov (hrp.gov.sg)

Job Description

As a Section Head for Instrumentation & Control team at TSDP, your job role will include, but is not limited to the following :

• Lead, plan and implement maintenance activities to ensure its reliability in supporting operational requirements
• Manage and attend to troubleshooting breakdown maintenance, including after office hours
• Developing and implementing preventive maintenance schedules and procedures to minimize downtime and optimize instrument and system performance.
• Responsible for calling of Quotations, Tenders and implementing analyser/instrumentation projects in the plant
• Managing I&C equipment assets according to requirements
• Managing the I&C maintenance budget effectively, including cost estimation, procurement of materials, and resource allocation
• Maintaining accurate records of I&C maintenance activities and instrument performance to inform decision-making and future planning.
• During the course of the work, you may be required to work closely with departments, consultants and contractors.
• Manage contracts related to ICA equipment to ensure works performed by contractors are executed according to objectives and within budget
• Keep abreast of new technologies to enhance reliability and improve productivity

Requirements

• Degree in Engineering (Electrical & Electronics)
• At least 3 – 5 years of relevant experience in maintenance (Instrumentation & Control) in plant environment
• Strong working knowledge on commissioning, troubleshooting and implementation of SCADA system
• Proficiency in AVEVA SCADA system, including its configuration, deployment, and maintenance is essential
• Project management experience for plant instrument replacement project and able to integrate the new instruments into SCADA system
• Hands on cybersecurity knowledge and practice will be an advantage
• Good verbal and written communication skills
• Self-motivated and driven
• Work well independently and also a good team player
• Able to work effectively under pressure and make critical operational and maintenance decisions
• Willing to work in peripheral regions of Singapore

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.