Key Responsibilities:

1. Participate on problem solving teams as related to compounding and secondary processing

2. Subject Matter Expert in operation of equipment (single screw extrusion, twin screw extrusion, batch mixing using double arm mixer, batch mixing using planetary mixer)

3. Responsible for continuous process improvement that combines quality and efficiency

4. Participate in scale up from laboratory to production for new formulations and processes

5. Research and implement new compounding and secondary processes as needed

6. Responsible for training others as related to manufacturing processes

7. Create and maintain preventative maintenance plan for all equipment

8. Participate with installation of new equipment

9. Other tasks assigned by superior

Requirements:

1. Bachelor or above in Polymer Engineering or related degree

2. More than 10 years process experience in polymer mixing/reaction industry, at least 5 years in twin-screw process process

3. Familiar with twin-screw and batch mixing equipment and project management

4. Good work ethic

5. Good problem solving skills

6. Works independently and efficiently

7. Good written and oral communication skills

8. Ability to work in cross function teams efficiently

9. LEAN manufacturing knowledge

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

Geotechnical:

- Experienced in the design of earth retaining and stabilizing structures, deep foundations, reclamations, slope stabilities.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Responsibilities

· Assist Project Manager in project management, survey, managing site works, construction activities, monitor work schedules, update progress, planning and implementation in accordance to master work plan and scope of work within project budget.

· Provide guidance and supervision to contractors/ in-­house workers in relation to Electrical/ Structured cabling works in accordance to proposal for site build for cabling infrastructure, installation quality, and adherence to site work safety requirements and to resolve technical issues.

· Prepare project submissions, tenders, system designs, installation drawing & coordination of all technical activities on assigned projects

· Participate in project meetings and resolving project issues

Requirements

• Candidates should possess at least a Nitec/Diploma in Electrical/ Engineering or its equivalent.

• At least 1-­3 years Project Management and hands on working experience in Electrical and/or Structured Cabling.

• Able to read/write and speak English is a must.

• Able to work independently and/or work together in a team when needed.

• Able to multi­task

• Have a strong sense of leadership, customer oriented and problem solving skills

· Proficient in Microsoft Office

- Working Mon to Alt Sat from 8.30am to 5.30pm

Responsibilities:

• Assist Piping Lead Engineer and execute the tasks assigned by Lead Engineer with no or minimum supervision.
• Lead a group of piping engineers and designers to execute the tasks assigned by Lead Engineer or/and monitor the work executed by engineering design house where applicable.
• Review and monitor engineering design progress related to piping work scopes.
• Prepare and raise technical query (TQF) and engineering variation order (EVO) related to piping for additional work scopes.
• Align the piping design output (such as piping isometric drawing, pipe spool drawing, etc) with construction team to ensure all the information required by construction teams are incorporated.
• Understand department and project specific design workflow.
• Understand Contract Specification and project requirement summary.
• Understand Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and piping routine requirements.
• Understand equipment layout plan (include escape route, maintenance space, mechanical handling, other equipment).
• Understand non-piping design related requirements such as fabrication, erection, painting, QA/QC, testing and commissioning.
• Responsible for ensuring that all works meet scope and technical quality of the project and comply with project requirements.
• Monitor P&ID revisions and ensure the compliance between piping 3D model with latest P&ID.
• Monitor design input need date and data required to execute the piping design works.
• Monitor 3D model clash and design review comments / punch lists.
• Monitor the comments from Client and Classification Society.
• Monitor all the piping related interface points.
• Monitor all the hotwork, tank’s coating and drydocking related activities where applicable.
• Monitor piping procurement status and surplus material due to drawing revision.
• Monitor all the hold items that affecting piping design completeness.
• Monitor and control the development of piping weight.
• Ensure proper communication and workflow are well established between piping stress team with pipe routine and pipe support designer team. Closely monitor the compliance between piping 3D model with the latest pipe stress analysis report.
• Review/comments piping arrangement, isometric and pipe supports drawings from piping designers.
• Review/comments on piping calculations carry out by other piping engineers/ subcontractors (e.g. pipe stress analysis report, flow master report, surge analysis report).
• Review/comments technical proposal from vendor.
• Review/comments vendor certified Document (VCD).
• Monitor and control drawing revisions especially when construction already started.
• Ensure proper communication and workflow are well established between piping designing team with construction team. Monitor the compliance between piping construction drawing (piping isometric and pipe support drawing) with the latest 3D model.
• Monitor the piping design database completeness (such as 3D model attributes, etc) to meet the project Digital Engineering requirements.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Onboard vessel to carry out inspection at site.
• Provide support to piping construction, QA/QC and other non-engineering design related activities such as inspection, coating, painting, welding, test packages, etc.

Requirements:

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Min. Bachelor Degree in Mechanical Engineering.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.
• Good knowledge in Piping Design.
• Good knowledge in International Standards related to Piping such as ASME, ASTM, API and Classification Society Rules and Regulations.
• Good skill in Excel is preferred.
• Experience in using AutoCAD, Naviswork, Smart Plant, Aveva, Cadmatic, etc. is preferred.

Overview:

To lead a team of personnel (Yard and contractors) on the efficient operation of activities carried out onboard vessel (offshore newbuilding, repair, conversion and modification) or workshop and ensure that works are completed within stipulated schedules with skill, efficiency, quality and innovative solutions. Operation activities include practical design, practice procurement, project management, construction, installation, testing and commissioning. Lead the Safe Distance Officer for Covid-19 or similar where applicable.

Responsibilities:

• Administers, monitors and continuously ensures that all operations conform to safety requirements and maintains high safety standards.
• Based on defect list given by ship owner, plans, prioritises and executes repair activity based on available resources and facilities. Provide information to APM for any CM39 requisition
• Co-ordinates and disseminates all the repair activities in the repair process in a given schedule with supervisors, yardmen and contractors in accordance to the Department Work Instruction and specifications.
• Attends vessel safety co-ordination meetings to ensure that all repair activities are carried out in a safe environment and meets the applicable statutory, regulatory and contractual requirements.
• Attends department production meeting to co-ordinate work progress, update work schedules promptly and scope of work. Highlight critical path and also channel to Ship Repair manager to achieve project milestones and prevent cost overruns.
• Liases with Shiprepair Manager/ Billing Dept about variation and additional in work scope. Raise variation order for additional work not stated in the specs
• Liaises and coordination with relevant trades towards milestone set
• Liaises with Superintendent for critical activities for smooth operation and provide technical proposal.
• Ensure cost control by correct Just In Time material ordering, proper manpower deployment and reporting, rework prevention, continual improvement on work method in order to meet the EVA, KPI and Key Thrust set by the department
• Feedback to HOD and superior on any non-conformance and record in Incident reporting and follow up on corrective actions
• Ensure all completed works carried out are documented and verified by Client
• Contractors work completion report verified as per actual carried out
• Ensure proper usage of department assets and report any non-conformance
• Whenever required communicate through by means of IT networking and solutions
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations and HSE operating procedures and conduct Risk assessments before commence of work. Counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures and Audit Matters e.g. ISO9001:2015, ISO45001:2018 and ISO14001:2015.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed. Perform Safe Management/ Distancing Officer duties stipulated when assigned
• Any other associated tasks and responsibilities assigned from time to time.

Preferred Requirements:

• Preferably with 2 years’ working experience in a similar capacity.
• Effective planning skills, good supervisory ability, conflict management skills and interpersonal skills.
• Effective problem solving and decision making skills are also essential.
• Ability to communicate in other languages (like Mandarin, Tamil, and Malay) would be an added advantage.
• Basic knowledge on Piping Standard and Compliance with all Codes, Policies, Procedures e.g. ASME Code for Pressure Piping B31.3, ASME IX, IACS
• Resourceful, dynamic, excellent leadership qualities, tactful, committed, good team player, customer oriented and able to work under stressful situations.

Preferred Qualifications:

• Minimum primary education with relevant working experience or diploma in Marine Engineering or Mechanical Engineering or NTC 3 certification or equivalent or completed apprenticeship in Marine Piping and Plumbing.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Create, review, administer and update (monitor & track) construction schedule for project
• Collaborate with other disciplines to collate/provide scheduling data — subcontract change requests, bid comparisons, new work item estimates and resolution of potential schedule/work problems
• Interface and work closely with project team and sub-contractors to ensure required progress
• Liaise with managers and engineers to discuss the progress of the project and address any issues that may arise
• Liaise with external contractors and suppliers to organize the phases of the construction development and scheduling
• Prepare cost estimations and detailed man-hour calculations
• Monitor and track/record work delay/progress and prepare scheduling reports
• Analyze gaps between the planned and actual progress and highlight the areas of concern to project management
• Prepare Project site daily, weekly, and monthly reports and project schedules
• Prepare cost estimation for any additional works and variation order
• Prepare Project site minutes of meeting (MOM) for the current progress meeting and other site meetings
• Any other duties to be assigned from time to time

Pre-requisites:

• Diploma/ Degree in Mechanical Engineering
• Minimum 3 years of experience in a similar role for power plant / industrial plant projects
• Proficient in Primavera P6 and/or MS project
• Candidates with experience in power plant projects will have an added advantage
• Independent and able to communicate effectively at all levels with other disciplines
• Good time management and planning
• Good organizational skills and methodological approach
• Strong attention to details
• Willing to work under pressure and in construction site conditions

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned

Requirement:

• Bachelor’s Degree in Civil Engineering or equivalent
• Able to lead and work independently
• Proficient in Microsoft Office and AutoCAD
• Good communication skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Highlights:

Immediate hiring

Accessible via public transportation

We provide opportunities for career advancement within the company

Benefits:

Working Hours: 8 am-6 pm (6 days)

14 days Annual Leave after confirmation

14 days Medical Leave (completion of 3 months service)

$200 medical claim per year

Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Sales Engineer, Engineering Service & Solutions

Reporting to the Sales Manager, you will be responsible for developing new business opportunities. You are required to generate and develop sales lead leading to creating a customer base. This will include increasing sales revenue and maintaining good relationships with existing customers, gathering and monitoring market information and preparing sale plan to meet targets.

Requirements:

· Degree or Diploma in Electrical Engineering

· Relevant sales experience will be an advantage

· Must be customer oriented and a team player

· Able to work independently and self-motivated

· Must be goal driven and target achievement oriented

· Able to carry out presentations

· Must own a car

· Able to travel when required

Scope of the role

Electrical Engineers apply their skills and expertise to generate solutions that require development or sustainment of new or improved techniques, procedures, or products. Your success includes assisting with planning, conducting, and evaluating approaches to meet project objectives in a timely, cost-effective fashion.

Job Responsibilities

• Analyze, design, develop, and maintain products; assist in commercialization.
• Assist in identifying and organizing requirements. Apply usability procedures and principles at project or product-line level or through customer input.
• Build prototypes, products, and systems for testing; set up and run laboratory simulations.
• Design testing procedures and coordinate testing. Conduct tests, document results, and develop client presentation.
• Conduct and/or participate in technical reviews of requirements, specifications, designs, codes, and other artifacts.
• Evaluate engineering approaches and risks to produce and iterate development plans.
• Train and support clients and field representatives.
• Identify and keep abreast of novel technical concepts and markets.
• Contribute to design standards and support design reuse.
• Author technical reports, papers, articles, presentations, and patents.

Job Requirements

• Master’s, or bachelor’s degree in electrical or electronic engineering
• Excellent verbal and written communication skills in English
• Eagerness to take on challenges and to learn new skills

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

Job Requirements:

• Use AUTOCAD system to draw construction shop drawing
• Provide support on daily operation activities which including office upkeep/maintenance
• Coordinate work arrangement with internal & external stakeholders
• General office support
• Handle sensitive information in confidential manner
• Develop & update administrative systems to make them more efficient
• Documentation and simple processing duties
• Determines project schedule by studying project plan and specifications, calculating time requirements, and sequencing project elements.
• Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems

Job Requirements:

• Knowledge of MS office
• Proactive & able to work
• Able to work in fast paced environment Bachelor’s Degree Engineering (Civil) or equivalent
• Minimum 3 years of Civil Engineering / Structural & AUTOCAD draw experience in related fields
• A proactive and resourceful individual who possess good communication, negotiation and presentation skills
• Good communication and analytical skills, able to interact with people of all levels

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Title: Sales Engineer

Department: Sales

Reports to: Regional Sales Manager

Location: Singapore, Malaysia, Indonesia, Thailand, Vietnam

Job Summary:

The Sales Engineer will be responsible for driving sales, developing business relationships, and providing technical expertise to clients in the fields of interior design, supply and installation, HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting. The ideal candidate will have a strong technical background combined with exceptional sales skills and the ability to work across multiple countries in the Southeast Asian region.

Key Responsibilities:

1. Sales and Business Development:

- Identify and develop new business opportunities within the specified regions.

- Establish and maintain strong relationships with existing and potential clients.

- Conduct market research to understand customer needs, market trends, and competitive landscape.

- Prepare and deliver technical presentations and demonstrations to clients.

2. Technical Expertise:

- Provide clients with technical advice and support on a range of products and services.

- Collaborate with the engineering and product development teams to understand product specifications and capabilities.

- Assist in the customization of products to meet specific client requirements.

3. Project Management:

- Oversee and coordinate the installation and implementation of products and systems.

- Ensure projects are completed on time, within scope, and within budget.

- Liaise with contractors, suppliers, and internal teams to ensure successful project execution.

4. Sales Administration:

- Prepare and present sales proposals, contracts, and agreements.

- Track and report on sales performance and progress against targets.

- Maintain accurate records of customer interactions and transactions in the CRM system.

5. Customer Service:

- Provide post-sales support to ensure customer satisfaction and repeat business.

- Address customer inquiries and resolve issues in a timely and effective manner.

- Gather customer feedback and work with internal teams to improve products and services.

6. Travel:

- Traveling within the designated region to meet clients and manage projects as require.

- Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Qualifications:

- Minimum of 3-5 years of experience in sales engineering or a related technical sales role.

- Sound technical knowledge in one or more of the following areas: HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting.

- Excellent communication, negotiation, and presentation skills.

- Ability to work independently and as part of a team.

- Proficiency in MS Office Suite.

- Ability to travel as require within the region.

Benefits:

- Competitive salary.

- Health and dental insurance.

- Opportunities for professional development and career advancement.

- Travel allowances and reimbursement.

Duties & Responsibilities

• Prepare the equipment list
• Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
• Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries
• Prepare the requisition and RFQ documents for vendor enquiry
• Prepare the technical clarification and technical bid evaluation of vendor proposal
• Review and check the drawings, designs specification, materials and equipment from vendor for conformity with project technical requirements
• To liaise effectively with vendor and inter-departments to resolve engineering technical issue
• To resolve and response to client comment.
• Prepare information drawing for interface design work whenever is necessary
• Prepare bill of material for cost estimation of bid project
• Provide engineering support for the equipment installation and commissioning activities at site
• Provide engineering support for maintenance works.
• To carry out any other duties as and when assigned by the immediate supervisor or principle engineer

Qualification & Experience Generally Required

• Bachelor Degree in Mechanical Engineering or its equivalent
• Min. 1 to 2 years engineering knowledge in mechanical disciplines in Oil & Gas and Petrochemical industries.
• Experienced in equipment engineering specifications and standards
• Familiar with industrial standards and local codes
• Strong communication skills and the ability to stay organised and multi-task
• Proficient in using MS Word, Excel, Autocad

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Job Info:

• Basic: $3000 - $4000 + Phone Allowance + OT + Performance Bonus
• Working Hour: Monday - Friday (9am - 6pm)
• Location: Tampines

Job Scope:

• Take the lead on AV initiatives and provide input for project procurement
• Offer expert advice on project plans and layouts
• Assist in the procurement of AV hardware and software, ensuring project needs are met
• Plan, maintain, and monitor project timelines, intervening when necessary, and managing equipment storage and transportation
• Perform rack and stack, onsite installation, upgrades, troubleshooting, and repair of AV equipment, networking, and other in-house projects at customer premises
• Complete electrical wiring, trunking, programming, and basic construction setups (may require the use of a ladder)
• Manage, test, and commission CCTV, door access, ELV equipment, Bluetooth devices, and other necessary devices
• Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects
• Liaise with clients to understand their requirements
• Conduct quality control analysis prior to events
• Diagnose and resolve technical issues, both hardware and software, as needed
• Respond to service calls related to equipment breakdowns
• Provide on-site support and user training at end-users' premises.
• Ensure production and updating of documentation such as user guides, etc
• Follow up with the finance department regarding costing and billing

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

Improved JD:

• Oversee the maintenance, monitoring, and uptime of EV charging stations to ensure seamless customer experiences. Lead a service team.

• Manage the lifecycle of technology assets, including chargers, software platforms, and network security, ensuring system reliability and scalability.

• Establish and implement SOPs for troubleshooting and preventive maintenance, optimizing network performance.

• Implement data analytics solutions to monitor and analyze charging station performance, driving continuous improvements in operational efficiency.

- Collaborate with key vendors, suppliers, and partners to secure and manage essential hardware, software, and support services. Oversee the design, testing, and implementation of new chargers, including setting up Router, LAN or SIM. Set up API.

- ⁠Ensure that all technology solutions comply with local regulations and industry standards for safety, environmental impact, and cybersecurity.

• Oversee the implementation of cybersecurity protocols to protect customer data and infrastructure from potential threats.

- Work closely with the customer support team to address technical issues and improve customer satisfaction.

• Evaluate and manage relationships with Factory & technology providers, ensuring cost efficiency and quality.

Purpose Statement:

• Ensures reliability and mechanical integrity of equipment for processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance.
• Develops engineering solutions for repetitive failures and all other problems that adversely affect plant operations including capacity, quality, cost or regulatory compliance issues.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items

Major Responsibilities:

• Ensures reliability and maintainability of equipment, processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance
• Lead and drive mechanical integrity program in compliance with regulations
• Take a lead to troubleshoot equipment reliability issues and carryout RCFA for the repeated failures and failures that has an impact to production, quality and safety.
• Lead RCM studies for critical assets/systems and implement the action items generated.
• Run online/offline condition monitoring program site wide.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items.
• Works with project engineering teams to ensure reliability/ maintainability of new/modified installations.
• Perform analysis of asset performance including: Asset utilization, Overall equipment effectiveness, remaining useful life and capital replacement plans as well as other parameters that define Site MEP KPIs such as availability, maintenance performance, reliability and R&M costs of assets.
• Develop SOPs, equipment job aids, checklist to assure no equipment reliability issue after repair work.
• Evaluate content of maintenance plans in CMMS including methods, maintenance frequencies and spare parts needed

Qualifications:

Education

• A bachelor’s degree or a diploma in Mechanical engineering discipline.

Experience

• Mechanical engineering degree with at least 5 years work experience or a diploma with a minimum of 15 years of relevant work experience in pharmaceutical/ biological/ chemical/ oil & gas industries.
• Experience driving RCM studies and RCFA
• Experience/Knowledge in Asset Integrity Management
• Sound technical knowledge coupled with hands-on experience in maintenance of processing equipment

Skills

• Comfortable working in a team and matrix environments with high degree of initiative and self-motivation
• Scientific approach to solving problems and makes data-based decisions.
• Keen in driving and adopting new technologies.
• Knowledge of CMMS, Reliability, and proficiency in MS Office products (Excel, Outlook, PowerPoint, Word, Project)
• Knowledge on vibration analysis, RCM and RBI
• API 510/570/580 certification will be an added advantage
• Good written and oral communication skills
• Interpersonal skills and a "hands-on" attitude
• cGMP experience is a plus

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Position Overview: Customer Success Engineer provides technical support and ensures the success of our client's post-implementation. He/she is to be highly knowledgeable and skilled in all aspects of Tunity’s product architecture, showcasing individual expertise in software and adept knowledge of its integration with hardware. Acting as the technical contact point for our clients, he/she ensures a seamless and cohesive experience of service support for our clients.

Key Responsibilities:

• Product Expertise: Develop a deep understanding of Tunity's products, from software to hardware, to provide comprehensive support across our product and solution suite.

• Software Support: Provide expert software support, resolving issues swiftly at the root cause to maintain high levels of client satisfaction.

• Maintenance Management: Implement and manage software maintenance processes, actively monitoring and analysing activities to identify improvement areas, and managing preventative maintenance schedules.

• Solution Maintenance: Oversee the ongoing maintenance of software and platform solutions, ensuring they are current, optimized, and operating effectively within the client's infrastructure.

• Hardware Liaison: Collaborate closely with the hardware team, addressing hardware-related concerns, and providing timely resolutions to clients.

• Client Communication: Work in tandem with Customer Success Specialists in client engagements and communications, such as guiding clients on resolution processes, conducting training, participating in and contributing to client meetings, etc.

• Documentation and Analysis: Create and maintain technical documentation, conduct regular system performance and cost analysis, and prepare reports that inform strategic decisions.

• Technical Assessments and Implementation: Lead in-depth technical reviews and strategically recommend solutions to address client change requests, ensuring optimal outcomes and seamless integration of modifications. Implement and perform coding of the approved solution.

Qualifications:

· Tertiary qualification in Computer Science, Information System, Computer Engineering or a related field.

· At least 3 years of professional experience as a developer

· Proficiency in back-end development using Entity Framework, C#, .NET Core, .NET Framework, MS SQL, and RESTful Web API.

· Proficiency in front-end development using Angular 2+.

· Solid understanding of databases, both SQL and NoSQL.

· Experience with version control systems (e.g., Git).

· Knowledge of containerization and orchestration technologies (e.g., Docker, Kubernetes) is a plus.

· Knowledge of Single sign-on (SSO) (e.g Microsoft Entra ID, AWS IAM) via SAML/OAuth is a plus.

· Familiarity with cloud platforms (e.g., AWS, Azure, GCP) is a plus.

· Experience in Inventory Management System, Warehouse Management System and SAP is a plus.

· Excellent problem-solving and communication skills.

· Ability to work effectively in a collaborative team environment.

We are looking for candidates who possess a robust understanding of RACF, rather than those primarily knowledgeable in MF application development. Our ideal candidate should demonstrate deep expertise in RACF and its related functionalities.

Responsibilities:

Manage and drive z/OS Unix (Mainframe Access Management operations and audits).

Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.

Automate manual processes through scripting or via zSecure.

Possess strong knowledge of designing and reviewing RACF access groupings.

Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.

Experienced in managing Mainframe security projects, operations and implementation

Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.

Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA

Good to have strong experience with using zSecure Admin and zSecure Audit modules.

Good working knowledge of Access Management lifecycle and processes.

Experience in banking or financial services institutions preferred

Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure).

Assists in the coordination of various teams testing and evaluating for the development of design and its implementation of the best output.

Installs, configures, and tests operating systems, application software, and system management tools.

Ensures the highest level of systems and infrastructure availability.

Evaluates the existing systems and provides the technical direction.

Plans and implements system automation as required for better efficiency.

Deals with work process, optimization methods, and risk management tools in the given projects for the successful accomplishments according to the requirements of the stakeholders.

Computer science degree

Scripting and programming proficiency

OS and Network experience

Certification may be helpful

Operating systems Linux, IBM AIX & Solaris

Configuration Management Tools: Ansible and Puppet

Monitoring tools: ELK, Prometheus, Grafana

APM Tools:  Dynatrace & AppDynamics

Cloud Platforms: AWS, Microsoft Skytap, Azure and GCP

Scripting Languages:   SHELL BASH

IaaC Tools: Terraform, Dockerfile

Containerization:  Docker, PCF & Kubernetes.

UNIX System Administration (RHEL, AIX & Solaris), Problem Determination and solving, and experience on GPFS, PowerHA System Mirror, and VIO.

Experience in Observability and Monitoring including APM tools

The PTO Lead Process Engineer leads new product introductions and the transfer of drug products to other facilities of moderate/high complexity independently and is a coach for his/her colleagues on the commercialization and manufacture of all drug products. He/ she typically will assume the responsibilities of a technical product steward and leads/supports all technical/ process activities (for example) investigations, validation and qualification processes, risk assessments and process safety management activities under his/ her responsibilities. The PTO Lead Process Engineer also leads/supports continuous process improvement activities to enhance site performance metrics and provides advanced/expert knowledge to the site and across our global technical network (while leveraging on other site experiences / knowledge) and continuously expands on personal expertise. He/ she will also provide technical supply support independently. The PTO Lead Process Engineer is expected to possess advanced/expert knowledge of at least one process/platform technology and supports the objectives of his/her seniors and the direct supervisor.

WHAT YOU WILL DO

MAIN RESPONSBILITIES

• Leads new product introductions to the site by conducting process and equipment comparisons, new raw materials introduction, development studies, clinical supplies manufacturing, cleaning processes development/ validation and training of technicians as required. Identifies and implements strategies for PPQ matrixing, novel technologies and new products etc. Authors PPQ protocols, reports and other associated documentation related to a new product introduction. Expected to have an advanced knowledge of product development, scale-up and technical transfer, key supporting documentation and associated regulatory requirements. Anticipates and remediates quality issues and challenges from the technology transfer process. Demonstrates advanced knowledge in technical writing for investigations, change request, PPQ reports and CMC sections.
• Leads and/or supports the design and execution of small/ full scale experiments using appropriate methodology and/or simulations for products/ processes to evaluate the impact of proposed changes to validated equipment/ processes.
• Proactively identify solutions independently to address issues that arose during experiment/ evaluation
• Leads/ provides technical guidance in support of site and divisional capital projects and new facility start-up activities. Ensures that the process design is well thought-out and robust for routine manufacturing. Provide technical input independently to the process design to ensure its fit for purpose for routine manufacturing. Responsible to transfer the knowledge of the project and facility to IPT colleagues.
• Provides technical expertise related to the product, equipment and manufacturing/cleaning processes in response to deviations/ product complaints/ adverse events to identify point of occurrence, root cause and corrective/ preventative actions. Demonstrates ability to lead and resolve complex technical issues and investigations and resolve with minimal supervision.
• Provides technical expertise for compliance activities such as audit and regulatory support. Acts as primary regulatory representative with business partners and regulatory agencies for moderately complex products/ programs/ issues.
• Manages product portfolio activities and is expected to manage a project team for activities associated with the product portfolio. Examples (but not limited to) include managing documentation updates (e.g. SOPs, batchsheets, recipes), quality risk assessments, change control management/ filing support (if applicable) and validation activities such as equipment qualification, simple process validation and cleaning validation/monitoring activities. Expected to have an advanced knowledge of respective compliance topics related to the above-mentioned activities. Demonstrates good project management skills (e.g. define core team and activities, project scheduling, stakeholder management and issues escalation etc), and demonstrates the ability to manage/ influence the project team.
• Supports routine supply manufacture by providing on going technical support to the IPT, participates in Tier processes and implements opportunities for improvement utilizing MPS (Our Production Systems) tools. Ensures optimum production runs, identifies constraints and non-conformances and troubleshoots to resolve complex issues in production systems. In addition, conceptualizes process designs to troubleshoot and resolve complex operational or manufacturing issues and recommend enhancements to improve production runs and enable the continuously improvement of the product cost structure.
• Manages and performs the proactive monitoring of the performance of process parameters, critical quality attributes and equipment/module(s)/unit operation(s) performance during manufacturing and cleaning. This could involve leading/participating in Prospective Process Analysis (PPA), statistical analysis and response to shifts and trends in process performance. Undertakes responsibilities as an active site product steward and is a member of the Value Chain Technical Team where applicable.
• In addition, leads Continued Process Verification and participates in Annual Product review activities as part of product lifecycle management. Applies moderately complex statistical and risk analysis tools to evaluate actions required to ensure product robustness across applicable manufacturing equipment and processes.
• Demonstrates advanced understanding of product CPP, CQA, Cpk and sterile boundary of the current validated processes. Has good knowledge of the raw materials and PCC (product contact components) used for the products under his/her responsibility.
• Actively participates and shows commitment to collaboration and sharing of best practices across the global S&T network. Typically possesses advanced and/or expert knowledge in at least one platform technology/ process.
• Complies with all divisional and site-specific policies, guidelines and procedures.
• Demonstrates and promotes Environmental, Health & Safety (EHS) leadership behaviors, ensuring that all activities are carried out in accordance with EHS requirements. Actively participates in GEMBA safety walks. Leads/ participates process hazards analyses (PHA) and applicable Process Safety Management (PSM) activities related to new/inline products.
• Where applicable, develops SOPs, gap analyses and procedures for Quality/EHS subsystems/ topics in compliance with regulatory requirements, divisional and corporate policies and guidelines. Typically possesses advanced and/or expert knowledge in at least one compliance topic.
• Demonstrates leadership behaviors in alignment with our leadership standards (Individual Contributor). Practices Inclusion as the How.
• Leads personal career development with manager assistance through annual Performance Management Process (PMP), Employee Development Plan (EDP) and career mapping.
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

Qualification:

• Bachelor's degree in a technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences

Experience:

• Minimum 5 to 10 years technical experience in related pharmaceutical manufacturing industry.
• Demonstrated capability to successfully lead teams in complex projects.
• Expert knowledge of core technology/unit operations relevant to active pharmaceutical ingredient, Biotech and/or Non-Sterile manufacturing.

Leadership, Professional and Functional Competencies

• Demonstrate leadership skills in alignment with our Leadership Standards, focusing on build talent, fostering collaboration and drive results.
• Effective communication skills, both oral and written. Ability to work effectively on cross- functional teams as a leader or a core member.
• Strong Leadership capabilities, with desire for active people development in the organization.

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.