Total 657 quality assurance control job vacancies in 7 tuas loop singapore

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Managing of all direct & indirect material inventory to ensure sufficient supply at all times.
• Coordinate warehouse activities such as distribution, issuance and receipt of cargoes of different temperature.
• Ensure all stocks are being stored at the right temperature and place.
• Monitor and Control material usage and ensure FIFO and ensure no supply issue at all times.
• Liaise with Purchaser & Quality team on any item quality issue to rectify and prevent supply shortage issue.
• Investigate any inventory discrepancies, reconcile all inventory reports and highlight all issues/findings for management review.
• Organize and conduct regular stock take in different locations to ensure stock accuracy.
• Maintain accurate inventory records of all locations and prepare regular inventory reports in an orderly and timely manner.
• Control all key items delivery daily and ensure to maintain safety stock and prevent over stocking.
• Responsible for stocks return, exchange and stocks adjustment functions.
• Address issues promptly, maintain operational standards, and enhance processes for optimal efficiency.
• Timely report and submit the KPI reports to the Manager.

Requirements:

• Diploma or equivalent education.
• Minimum 3 years working experience in a food / beverage manufacturing environment.
• Organized, structured, analytical and data-driven mindset.
• Good communication skills and able to work well with staff from all level.
• Able to work in fast-paced environment.
• Proficient in Microsoft office.

Job Responsibilities

• Lead and drive the team for continuous improvement on system and process, Conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.
• Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.
• Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.
• Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.
• Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.
• Manage customer complaint and attend customer meeting related to quality or metrology issues.
• Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.
• Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place
• Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements
• Assist in evaluation and qualification of new supplier.
• Other duties as and when assigned by Supervisor or Management

You may be authorised to:

• Contain suspected, non-conforming products and prevent from further processing.
• Stop new orders which do not conform to requirements.

Requirements

• Degree or Diploma in Quality Engineering or relevant
• Minimum 5 years of relevant experience in a plastic injection molding industry
• Knowledge and experience in GD&T, SQC tool
• Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.
• Ability to apply problem solving technique and provide solutions under minimal supervision.
• Good written and oral communication skills
• Organized, decisive, logical, Independent and possess leadership, organisation and communication skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Our client, a marine company in Singapore dealing with shipyard , is looking for a QA professional. As a member of the QA team, you will play a critical role in ensuring the highest standards of safety and quality across our operations. You will work closely with various departments to develop and implement QA policies, procedures, and initiatives. This is a unique opportunity to contribute to the success of a dynamic and growing organization in the maritime industry.

• Reviews and updates organization Quality policy and objectives for Management’s approval

• Reviews & updates company Occupational Health & Safety policy & objectives for Management’s approval
• Prepares, reviews and updates Quality Management System (QMS) and Occupational Health and Safety Management System (OHSMS) manuals, procedures and forms
• Interprets and implements quality assurance standards and procedures
• Reviews the implementation and effectiveness of standards and procedures
• Plans & conducts internal audits for ISO 9001:2015 & ISO 45001:2018 as scheduled in the annual work plan
• Plans and conducts Management Review Meeting for ISO 9001:2015 and ISO 45001:2018
• Manages 3rd party certification body audits for ISO 9001:2015, ISO 45001:2018 and BizSafe STAR
• Co-ordinates with respective Departments for the preparation for external audits
• Follow-up on post audits activities
• Manages Document Control for all QMS and OHSMS documents to ensure latest revision
• Supports and works with various departments in procedure reviews and updates, ensures changes are incorporated in a timely manner and assists in assessment of these changes
• Identifies training needs and organizes training interventions to meet quality standards
• Conducts Factory Acceptance Test (FAT), workshop fabricated items inspection and onboard completion inspection both internally and externally
• Prepares inspection reports of inspection outcomes and updates overall inspection status summary
• Liaises with Clients and CLASS Surveyors on external inspection
• Monitors and expedites closure of all non-conformances of the company, if any
• Responsible to create and review Risk Management Plan for projects

• With strong background in ISO:9001-2015 QMS
• Technical Inspection and Writing
• Organizational Performance Management
• Quality Systems Management
• Leadership
• QA for Interior Design
• Graduate in Business Management
• Experience in outfitting will be advantange

Singapore Citizen and Singapore residents will be given priority in the selection process. Only the shortlisted candidate will be contacted within 2 weeks' time. If you have not received any call or email from our recruitment team, assume that you are not shortlisted for the position.

Chan Chee Meng

EA 07C3069

R1110620

• NIGHT SHIFT
• 1 WEEK OFF 1 DAY SUNDAY NIGHT
• CAN ACCEPT WET MARKET ENVIRONMENT
• AREA : JURONG FISHERY PORT
• SELLING SEAFOOD
• PURCHASE SEAFOOD
• ARRANGE JOB TO STAFF
• CHECKING STAFF'S JOB
• RESPOND CUSTOMER
• NEED A LORRY LICENSE - SOMETIME NEED DELIVERY
• PACKING ITEM
• TEACHING STAFF
• EVERY DAY DO A REPORT TO BOSS
• SOMETIME NEED GO CUSTOMER'S WET MARKET SURRVEY

Job Summary:

Support in the daily business operations for drop shipment activities, including packing, quality check and preparation of delivery of pharmaceutical and nonpharmaceutical products for orders. Assist in drug stock management activities.

Core Responsibilities:

• Assist in the implementation of quality assurance and quality improvement projects and activities to meet the Good Distribution Practice and Good Distribution Practice Medical Device Singapore (GDP & GDPMDS) standard
• Assist in internal audits, record checking and implementation of post-audit corrective actions
• Support in preparing document, forms, chart and SOPs.
• Assist pharmacists in product recalls
• Assist in inventory management of pharmaceutical and nonpharmaceutical products
• Ensure proper storage and handling of drug stock
• Highlight equipment failures and unusual activities to pharmacists/supervisors
• Maintain the proper functioning of facilities
• Suggest improvements to workflows and procedures
• To carry out any additional job-related duties that may be assigned from time to time

Job Requirements:

• Diploma in Pharmaceutical Science or equivalent
• Experience in the pharmaceutical sector or Quality Management Systems specific to Good Distribution Practices (GDP or GDPMDS) preferred
• Organised, meticulous and pay attention to details.

· Assist WSHO to ensure all safety matters are complied with statutory, contractual and management system requirements

· Conduct regular site inspections and follow-up actions to ensure environmental compliance

· Prepare and submit the site Environmental Control Program to the Project Manager

· Inspect the construction site to ensure all facilities and equipment relevant to maintenance of environmental health are in proper working condition and do not pose any environmental health hazard

· Attend to all feedback on such irregularities and inform the Project Manager accordingly

. Implement and maintain proper procedures of Environment Management, administrative and recording system

· Any other ad hoc duties assigned by the management.

Requirements

Scope: (Pipe Jacking/ Pipe Laying/ SEWER Rehab)

Preferably with LTA working background and more than 3 years practicing experience.

Diploma / Degree / Advanced Professional Cerifications

Driving License & Own Vehicle is added advantage

Possess a valid registration with NEA as ECO

Independent with good communication skills

Job Summary:

Support in the daily business operations for drop shipment activities, including packing, quality check and preparation of delivery of pharmaceutical and nonpharmaceutical products for orders. Assist in drug stock management activities.

Core Responsibilities:

· Assist in the implementation of quality assurance and quality improvement projects and activities to meet the Good Distribution Practice and Good Distribution Practice Medical Device Singapore (GDP & GDPMDS) standard

· Assist in internal audits, record checking and implementation of post-audit corrective actions

· Support in preparing document, forms, chart and SOPs.

· Assist pharmacists in product recalls

· Assist in inventory management of pharmaceutical and nonpharmaceutical products

· Ensure proper storage and handling of drug stock

· Highlight equipment failures and unusual activities to pharmacists/supervisors

· Maintain the proper functioning of facilities

· Suggest improvements to workflows and procedures

· To carry out any additional job-related duties that may be assigned from time to time

Job Requirements:

· Diploma in Pharmaceutical Science or equivalent

· Experience in the pharmaceutical sector or Quality Management Systems specific to Good Distribution Practices (GDP or GDPMDS) preferred

· Organised, meticulous and pay attention to details.

JOB SUMMARY:

The Quality Engineer for Mechanical and Piping ensures adherence to project specifications and standards throughout engineering construction activities. The successful candidate will have responsibilities to encompass inspection, managing QA/QC documentation, coordinating meetings, and enforcing HSE regulations. Key tasks involve material verification, conducting audits, and resolving non-conformances.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance with HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related to ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval
• Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional
• Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

JOB SUMMARY:

As a Quality Engineer specializing in Electrical and Instrumentation (E&I), you play a critical role in ensuring the highest standards of quality and compliance across EPC projects. Responsible for overseeing inspection and testing activities related to electrical and instrumentation systems, you will be responsible to ensure adherence to project specifications, codes, and standards. With a focus on safety and precision, you collaborate with project teams, subcontractors, and clients to drive quality assurance throughout all project phases.

RESPONSIBILITIES:

• Always follow all site safety requirements and use of PPE
• Write, modify, review, and implement project related ITP, Procedures, Specification requirements.
• Material Verifications on all incoming outgoing E&IC project related materials and prepare inspection reports.
• Perform specialist inspection surveillance of E&IC fabrication and installation to ensure that contractor carries out the fabrication and assembly work in accordance with the contract specifications, approved drawings and fabrication/erection and test procedures and the defined hazardous area requirements.
• Provide leadership for executing teams on E&IC.
• Perform daily QA/QC monitoring and surveillance.
• To report non-conformance findings.
• Record all defects observed using the Project Completions Management System (Database) electronic punch lists.
• Monitor and check all electrical hazardous area certification related inspection work to assure compliance.
• Proactively advise where work, material or process needs to be revised.
• Use project Completions Management System database, witness, review and survey of electronic E&IC check sheets and to ensure accuracy of information recorded.
• Repair defective works on the spot where possible.
• Closeout punch list items in Completions Management System completed by Contractor/Supplier, etc.
• Witness & conduct various electrical & instrumentation testing.
• Witness & conduct FAT & SAT inspections.
• Witness & conduct PLC Panel, MCC Panel and Electrical Panels FAT
• Final document compilation and submissions.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Authorized to stop contractors’ work where quality is not being achieved.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or retesting.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning, and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops including Instrument Calibration, Control Valve testing, and Material inspections.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Monitoring all installation and inspection of instrumentation work with respective Quality ITPs and Checklist.
• Monitoring and inspection of Loop checking.
• Preparing inspection & test reports of completed inspections & tests.
• Preparation of final quality dossiers / test packs and maintaining backups of completed quality.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality
• Implement, maintain and verify quality system at job site as per company quality procedure and project quality plan.
• Incoming material inspection, review of certification documents and prepare inspection reports.
• Preparation of inspection test plan, review method statements related to instrumentation.
• Inspection of fabrication, installation and commissioning activities for process/electro-mechanical works related to instrumentation.
• Inspection of subcontract works – factory acceptance tests, etc.
• Third party certification of equipment /machinery related to job site.
• Preparation of inspection reports
• Review and compilation of inspection documents for final documentation.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor’s degree/Post Graduate Diploma/Professional
• Degree in Engineering (Electrical, Instrumentation) or equivalent Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Certification/Training in Quality
• A working knowledge of Construction / Electrical / Inspection codes and practices
• The inspector shall have direct knowledge of all aspects of electrical testing such as Insulation, Resistance testing, Current and Voltage testing.
• Have a working knowledge of the National Electric Code/NFPA 70, IEC or equivalent standards.
• Shall be able to inspect complete loop checking, wiring continuity and color coding, start-up, and troubleshooting.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as assigned by your Superior.

JOB SUMMARY:

As a Quality Engineer specializing in Structural aspects, you play a critical role in ensuring the highest standards of quality and compliance across engineering construction projects. Your responsibilities include inspecting structural components, ensuring compliance with project specifications, codes, and standards, and collaborating with project teams to maintain project quality and safety standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance to HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related to ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval
• Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional
• Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

JOB SUMMARY:

The Quality Manager plays a pivotal role in ensuring the highest standards of quality and workmanship across all aspects of engineering construction within Gradiant projects. Responsible for overseeing quality assurance and quality control processes, the Quality Manager ensures compliance with project specifications, applicable codes, standards, and client requirements.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance to HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 15 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

Main duties and responsibilities:

To support the local team in all QEHS related compliance and performance of TES Singapore sites, which includes but not limited to emergency response (drills and TTX), incident investigation and IH monitoring, etc. Also, includes all Environmental related matters and regulatory reporting, global QEHS procedures & programs and overall lead for all QEHSMS / R2 audits, 3rd party certifications and customer audits as well as supporting Group EHS.

Environment:

• Reporting of QEHS performance metric reporting and activities to Global/ Group EHS Manager.
• Provide guidance on QEHS best practice principles, techniques and culture in Singapore sites.
• Compilation and submission of annual recycling data and other relating environment related info to relevant competent authorities.
• Maintain Basel Permit / Import Approval of all sites, including applications and tracking of movement documents.

Audit:

• Ensure Singapore sites are aware of and complying with Corporate/ Group QEHS policies, standards and programs, and local legislations.
• Program lead for 3rd party (ie. QEHSMS & R2) audits and key customer accounts on QEHS audits, provide resource and preparing Singapore sites with upcoming audits, tracking & reporting of audit results and monitor closure of corrective actions.
• Develop and conduct Singapore sites QEHS Audit program to ensure compliance to EHS regulations and Global EHS standards. Track & report audit results and monitor closure of corrective actions.
• Analyse data from EHS audits (including 3rd party QEHSMS & R2 certification audits and key account QEHS audits) to identify trends and provide feedback and preventative measures.

Other support:

• Support the development & implementation of One TES IMS – global QEHS procedures and programs.
• Monthly tabulation and submission of Basel permits status reporting for Exco meeting.
• Provide coordination and administrative support to QEHSMS & R2 certification program in Singapore.
• Support global initiative programs / activities as assigned.

Job Requirements:

• Diploma / Degree in any Engineering discipline and registered WSHO and FSM.
• Good to have: Qualified industrial first aider, noise monitoring office or any other IH related experience.
• Proficient in English and Mandarin and good report writing skills, familiar with Microsoft office.
• Trained in/ familiar with ISO 14001, ISO 45001, ISO 9001 and Responsible Recycling (R2) or equivalent.
• Experience with handling government agencies and knowledge in license and permit application from agencies such as NEA, MOM, SCDF, PUB and SPF.
• 5-8 years of working experience as in WSH related fields or equivalent in manufacturing / electronic or chemical industries.
• Experience in conducting ISO 9001/ ISO 14001/ ISO 45001/ R2 audits or handling OSH related audits.
• Good communication skills, team player, responsible, take initiatives and work independently without much supervision.

Good to have:

• Registered WSHO & FSM.
• Proficient in English, Mandarin and good report writing skills, familiar with Microsoft office with auditing experience in ISO 14001, ISO 45001 or ISO 9001.
• At least 5-8 years of working experiences as in WSH related fields or equivalent in manufacturing/ electronic or chemical industries.
• Good leadership skills to be able to guide and lead a team of EHS professionals.

As a Quality Assurance (QA) Specialist in the sales and rental of used construction equipment, your role is pivotal in ensuring that every piece of machinery meets the highest standards of performance, safety, and reliability. Here's a breakdown of your key responsibilities:

1. *Quality Assessment*: Your primary task is to thoroughly inspect each piece of used construction equipment before it's put up for sale or rental. This involves conducting comprehensive checks on various components such as engine functionality, hydraulic systems, electrical systems, and structural integrity. Think of yourself as the meticulous inspector, meticulously examining every nook and cranny to ensure optimal functionality.

2. *Documentation and Reporting*: Your role involves meticulous documentation and reporting of inspection findings, ensuring transparency and accountability throughout the process. You'll collaborate closely with workshop managers, mechanics, and electricians to obtain detailed diagnostics reports and checklists for each piece of equipment. These reports serve as a comprehensive record of maintenance and repair history, highlighting any issues addressed and parts replaced. As the QA Specialist, you hold these personnel accountable for the quality and thoroughness of their work, ensuring that all repairs and maintenance tasks are completed to the highest standards. By maintaining detailed documentation and fostering a culture of accountability, you contribute to the overall reliability and trustworthiness of the equipment offered for sale or rental.

3. *Quality Control Procedures*: Implementing and enforcing quality control procedures is vital in maintaining consistency and reliability across all equipment. You'll develop and refine these procedures to streamline the inspection process while ensuring thoroughness and accuracy. Think of it as creating a standardized checklist, ensuring that no aspect of quality assessment is overlooked.

4. *Collaboration with Sales and Rental Teams*: Effective communication and collaboration with the sales and rental teams are key aspects of your role. You'll liaise closely with these teams to provide insights into equipment quality, addressing any concerns or queries they may have. Picture yourself as the bridge between the technical aspects of equipment quality and the customer-facing sales and rental processes.

5. *Customer Satisfaction and Support*: Ensuring customer satisfaction is paramount. You'll offer support to customers by providing detailed information about the equipment's condition and addressing any post-purchase or rental issues promptly. Your expertise and assistance contribute significantly to building trust and fostering long-term relationships with clients. Consider yourself as the reliable point of contact, ready to assist customers at every step of their journey.

6. *Continuous Improvement*: Striving for continuous improvement is ingrained in your role. You'll actively seek feedback from stakeholders, identify areas for enhancement in the inspection process, and propose innovative solutions to optimize efficiency and effectiveness. This ongoing pursuit of excellence ensures that the quality of equipment and service continually evolves to meet and exceed customer expectations.

In summary, as a QA Specialist in the sales and rental of used construction equipment, you play a pivotal role in upholding the highest standards of quality, ensuring customer satisfaction, and driving continuous improvement in processes and procedures. Your attention to detail, technical expertise, and collaborative approach are instrumental in the success of the business.

*Requirements:*

Minimum Diploma in Mechanical / Manufacturing / Quality Management.

Minimum 1 year working experience

Acceptable communication and interpersonal skill and ability to communicate with all levels

Good understanding of technical drawing

Responsibilities:

• Manage the HACCP pre-requisite programs and review periodically their effectiveness in mitigating microbiological contamination risk. Revise as required for continuous improvement.
• Work with Cross functional team for FDA audit preparation.
• Worked with plant team, special cleaning activities eg. sanitation break.
• Establish and manage the pest control programs for the plant, collaborate closely with the Pest Control Service provider.
• Participate in internal HACCP/GMP and Quality audit programs.
• Support in OE/Engineering improvement projects to ensure compliance to food safety and hygiene requirements.
• Support Procurement team to ensure existing and new material suppliers meet our Food Safety and hygiene requirements.
• Support warehouse and third-party warehouse service provider to meet our Food Safety requirements and ensure material storage compliance. Participate in facility audit for cGMP, pest control and hygiene as required.
• Coordinate and facilitate activities to maintain and continuously improve plant hygiene standard.
• Establish and manage the hygiene monitoring program for production, warehouse, utilities and adjoining areas, with established test points, sampling frequency and acceptance criteria.
• Review and revise current plant hygiene zoning policy to mitigate physical and microbial product and chemical contamination risks, personal and material traffic flow, gowning and shoe change policy.
• Provide guidance in directing efforts to improve, maintain, and validate sanitation practices and procedures. Continuously benchmark or seek best practice in plant and equipment cleaning protocols.
• Evaluate and approve cleaning accessories and disinfectants used in sanitation procedures.
• Audit cleaning systems and procedures and recommends correction of unsanitary conditions.
• Define scope of works and establishes standards and measures of cleaning effectiveness for third party janitorial services for the plant.
• Implement plant wide programs and activities as communicated by site management and regional/global quality, through effective and cost-efficient hygiene and sanitation programs to mitigate microbiological risks.
• Initiate alignment discussions with operations manager and project engineers for plant improvements on hygiene engineering concepts. Validates and ensures that new projects comply with basic hygiene engineering standards.
• Monitor equipment, building, and grounds for routine and non-routine maintenance/repair for GMP compliances and hygiene engineering concepts in accord with Global guidelines.
• Facilitate initial training (and refresher training) to plant personnel on cGMP (HACCP), hygiene programs, and sharing of significant microbial and hygiene learning to prevent recurrence.
• Perform other tasks, roles or projects that may be assigned by Assistant manager Plant hygiene & Food safety Provides guidance and maintenance of Food Safety System (HACCP), and to maintain and continuously improve plant hygiene standard through ensuring compliance to food safety and hygiene requirement.
• Provide guidance in directing efforts to improve, maintain, and validate sanitation practices and procedures.

Requirements:

• Minimum Diploma in a scientific or technical discipline (Chemistry, Food Science, Microbiology or related) preferred or with equivalent skills and experience.
• Working experience in a Nutritional GMP manufacturing environment preferred. Experience in manufacturing of infant/ follow-up formula/ pharmaceutical will be of advantage.
• Understands quality systems, HACCP which includes environmental monitoring program, pest management program, sanitation program and other pre-requisite programs.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

ob summary:

Perform checking on incoming materials, finished products, production line. Plan and liaise with relevant departments to execute projects, non routine testing etc. Assist Manager in audits.

Job responsibilities:

• Liaise with relevant department on incoming materials schedule and perform the relevant checking.
• Review COAs to ensure conformity of the raw materials and packaging materials before use
• Conduct production line checking
• Complete finished products checking on time
• Perform microbial checking on the raw materials, packaging materials, water samples from line and finished products.
• Assist in data collection and investigation when non conformance occur.
• Support in non routine testing and project
• Ensure all equipment are calibrated and in good working condition.
• Liaise with testing lab on external testing

Requirements to excel in this position.

• Minimum diploma and degree (Certified in Food Science and Technology or its equivalent)
• Able to work independently or as a team
• Good analytical skills, detailed person
• Good communication and written skills.
• Willing to learn
• Proficient in Microsoft Office

- Able to start work immediately or at short notice would be preferred

We regret that only shortlisted candidates will be contacted.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer (Performance Testing)

Internal Code: A24005

What will you do?

We adopt an Agile development approach and work towards tech best practices and cutting-edge tools.

We are looking for software quality engineers who are passionate about improving the quality of the Government services provide. You will be part of an in-house team tasked with developing and maintaining the citizen disbursement system.

• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Performance/security testing
• Familiar with Java
• Create, maintain, and improve the automated test framework and test environments.
• Conduct testing on new features and file defects.
• Perform various tests such as manual/functional/performance/exploratory tests support UATs.
• Assist in resolving production cases.
• Participate in all agile ceremonies.
• Leadership experience

What are we looking for?

• Degree in software engineering, computer engineering, electrical engineering, or infocomm-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Experience in Python
• Experience in performing API Testing
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration, and continuous delivery
• Experience with open-source automated testing frameworks (Robot, Appium, Selenium)
• Enterprise level testing tools (HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage.
• Excellent verbal communication skills
• Proactive, self-driven and self-motivated

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

The incumbent will look to manage customer complaint and returns for customers in the Europe and/or Asia region.

Job Description

• Ensure accurate recording of daily customer complaints in SAP, following defined standards and coordinating with geographical coordinators.
• Analyze complaint data to provide concise event descriptions and product details, leading investigations and documentation efforts.
• Maintain effective communication with internal staff and global complaints coordinators throughout the complaint resolution process.
• Follow up on complaints, communicate corrective actions to customers, and manage aged stock, lost business, and product recall returns.
• Conduct statistical analysis of complaints, ensure data accuracy on complaint dashboards, and initiate improvement actions as needed. Identify opportunities for process improvement, engage stakeholders, and participate in audits and training activities.
• Contribute to business improvement initiatives and attend global meetings as necessary to support quality management efforts.
• Complete additional tasks as assigned by the Quality Manager

• Degree in engineering or chemistry (BS Chemical Engineering / Chemistry) or equivalent
• 5 years plus working experience in quality such as handling customer complaint and Quality Assurance.
• Knowledge and understanding of ISO 9001, ISO2000, ExCiPAT or similar quality systems and experience in facing quality audits.
• Good understanding of the principles of customer complaint management practices, and corrective action/ preventive action outcomes

Interested candidates can forward their CVs in MS Word format to [email protected]

• Reg No. R1875181
• Triton AI Pte Ltd
• License no. 21C0661

• Permanent position, Salary up to $6,000 with AWS, Bonus and Flexi Benefits
• Comfortable to travel and work at Jurong Island (Work Hours: 8.30am - 4.45pm)
• Must have knowledge in ISO standard to be able to understand and manage questions/complaints

• Perm with AWS, Bonus and Flexi Benefits
• Comfortable to travel and work at Jurong Island (Work Hours: 8.30am - 4.45pm)
• Must have knowledge in ISO or ExCiPAT to be able to understand and manage questions/complaints

The incumbent will look to manage customer complaint and returns for customers in the Europe and/or Asia region. You will work closely with other regional coordinators for smooth operation.

Job Description

• Ensure accurate logging of daily customer complaints onto SAP, adhering to defined standards and coordinating with geographical coordinators.
• Analyze complaint information for concise event descriptions and product details, leading investigations and documentation.
• Maintain effective communication with internal personnel and global complaints coordinators.
• Follow up on complaints, communicate corrective actions to customers, and manage aged stock/lost business/product recall returns.
• Perform statistical trending of complaints, ensure data accuracy on complaint dashboards, and initiate improvement actions.
• Proactively identify areas for process improvement, engage stakeholders, and participate in audits and training.
• Contribute to business improvement initiatives and attend global meetings as required.
• Undertake additional tasks assigned by the Quality Manager.

• Degree in engineering or chemistry (BS Chemical Engineering / Chemistry) or equivalent

• 5 years plus working experience in quality such as handling customer complaint and Quality Assurance.
• Knowledge and understanding of ISO 9001, ISO2000, ExCiPAT or similar quality systems and experience in facing quality audits.
• Good understanding of the principles of customer complaint management practices, and corrective action /
• preventive action outcomes
• Be able to prioritise work load.
• Strong attention to details, judgement, planning and operations and problem analysis.

Triton AI Pte Ltd

Registration Number: R1980724

EA: 21C0661

• Perm
• AWS
• Bonus
• Flexi Benefits
• Medical & Insurance Coverage

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection

Eligibility Criteria

• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

The incumbent will be required to design, control, implement and optimize automation systems and solutions:

• Responsible to support Projects and Operations (90%):
• Participate in development, execution, and deployment of IoT automation Projects or Products.
• Evaluating products to collect data from sensors and integrate that data to the control system and/or platform.
• Perform test and evaluation activities on Process Control System independently or in conjunction with vendors.
• Participate or lead quality or safety investigations and implement any automation solutions resultant from these investigations.
• Provide training to end users on process control system.
• The role includes research and development (R&D) tasks.
• Support the R&D team in Singapore (10%):
• Improve, propose new and support existing and future hardware and automation solutions.