Job Description & Requirements

Job Description & Responsibilities

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus:Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators;Involve in Quality Walks during site quality surveillance when requiredAssist to manage the project lessons learned and initiate improvements and ensure experience transfer.
• Collaborative Coordination: Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements:

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role.Min of 2 FPSO/FSO Projects Completion.
• Skills : Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicatorExcellent collaborator with cross-functional teamsIn-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators.
• Collaborative Coordination Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience: Min10 years of QAQC experience with at least 3 years in a leadership/supervisory.
• Skills: Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Applicants who are interested to apply for the position, please apply via this link : Find A Job | Careers@Gov (hrp.gov.sg)

Job Description

As a Section Head for Instrumentation & Control team at TSDP, your job role will include, but is not limited to the following :

• Lead, plan and implement maintenance activities to ensure its reliability in supporting operational requirements
• Manage and attend to troubleshooting breakdown maintenance, including after office hours
• Developing and implementing preventive maintenance schedules and procedures to minimize downtime and optimize instrument and system performance.
• Responsible for calling of Quotations, Tenders and implementing analyser/instrumentation projects in the plant
• Managing I&C equipment assets according to requirements
• Managing the I&C maintenance budget effectively, including cost estimation, procurement of materials, and resource allocation
• Maintaining accurate records of I&C maintenance activities and instrument performance to inform decision-making and future planning.
• During the course of the work, you may be required to work closely with departments, consultants and contractors.
• Manage contracts related to ICA equipment to ensure works performed by contractors are executed according to objectives and within budget
• Keep abreast of new technologies to enhance reliability and improve productivity

Requirements

• Degree in Engineering (Electrical & Electronics)
• At least 3 – 5 years of relevant experience in maintenance (Instrumentation & Control) in plant environment
• Strong working knowledge on commissioning, troubleshooting and implementation of SCADA system
• Proficiency in AVEVA SCADA system, including its configuration, deployment, and maintenance is essential
• Project management experience for plant instrument replacement project and able to integrate the new instruments into SCADA system
• Hands on cybersecurity knowledge and practice will be an advantage
• Good verbal and written communication skills
• Self-motivated and driven
• Work well independently and also a good team player
• Able to work effectively under pressure and make critical operational and maintenance decisions
• Willing to work in peripheral regions of Singapore

Job Responsibilities:

1. Handle customer complaints and quality related queries
2. Implement customer requirements, carry out product quality plan for all projects and ensure PQP effectiveness
3. Implement quality tools in production to support corrective and preventive actions and continuous improvement
4. Part and line approval follow up (Qualification Package) throughout the project
5. Supplier Quality Management
6. Handle quality issues and liaise with cross-functional team towards improvement
7. Ensure related documents are updated accordingly for lesson learnt and continuous improvement

Job Requirements:

• College degree of Science/ Engineering
• Experience in quality control and customer/supplier quality management
• Experience in incoming, manufacturing and customer service area
• Familiar with quality tools and have basic knowledge of six sigma
• Familiar with the knowledge of IATF 16949 standard and 5 Tools (PPAP/APQP/SPC/MSA/FMEA)
• Good inter-personal and presentation skill
• Self-motivated and good team player

Hydroleap is a Singapore-based deep tech startup with a mission of disrupting the wastewater treatment industry. Our cutting-edge electrochemistry technology and innovative approaches to water and waste management have eliminated the need for manual interventions and toxic chemicals, making our solutions fully automated, cost-effective, and environmentally friendly helping industries to be more water and energy efficient.

With multiple successful deployments across the Asia Pacific region, including in the agri-food, oil & gas, data center, desalination, and construction sectors, Hydroleap is significantly impacting how water and wastewater are treated. As a company, we are proud to be backed by an impressive group of governmental and private venture capitalists, such as UntroD Capital, Mitsubishi Electric, Seeds Capital, State Government of Victoria, Wavemaker Partners,, 500, SGInnovate, Sparklabs, and Entrepreneur First.

Join our team and be a part of a mission-driven organization that is changing the world, one drop of water at a time.

What you will be doing:

● Develop system designs, including programming and selecting instrumentation and control equipment

● Prepare and review I&C specifications, requirements, and drawings, such as instrument lists, datasheets, ICA panels, control valves, process functional descriptions, and single line diagrams (SLD).

● Oversee control architecture, create single line drawings, and develop control schematic diagrams, with a focus on programming and necessary modifications for SCADA/HMI systems.

● Collaborate in the development of P&IDs, package specifications, logic diagrams, cause-and-effect diagrams, and control narratives.

● Prepare Request for Quotations (RFQs).

● Lead and liaise with suppliers regarding Instrumentation and Control Automation (ICA).

● Conduct installation inspections, loop checks, startup, testing, commissioning, and troubleshooting of plants.

Your Capabilities and Credentials

● Bachelor’s degree in Electrical & Electronics, Instrumentation, or Automation Engineering.

● Minimum of 3 years of relevant work experience, preferably in Instrumentation and Control.

● Strong knowledge of Instrumentation and Control systems.

● Familiarity with high-end fieldbus communication protocols (e.g., Profibus, Modbus).

● Ability to read and understand single line diagrams and generate Bills of Materials from them.

● Understanding of control schematics, motor controls, and materials take-off.

● Experience with Siemens or Mitsubishi PLC software is a plus.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description:

• To assist the QA engineer for developing and constantly improve on the Quality Management (QM) System and ensure compliance to quality lntemational Standards.
• To assist in managing and ensuring that system and controls of the QM System are working efficiently and effectively.
• Inspections of projects/components to review and maintain quality standards and requirements for the Company.
• Responsible for manufacturing Quality Assurance as well as Incoming, In-Process and Outgoing Quality operations.
• To assist in preparing inspection reports as per customers' requirements.
• To assist in managing day to day internal quality issues and non-conformity disposition.
• To assist in reviewing, coordinate and follow up in corrective and preventive actions.
• Prepare be MR for ISO900I and lSOl400l.
• Responsible for developing and overseeing the implementation of the Quality Control Plan.
• Responsible for the controlled documents such as Quality Management System Manual, customer drawing, standard, specification etc.
• Monitoring of all works performed by suppliers / cuntractors to ensure that quality works are produced.
• Maintain measuring equipment, gauges and welding machines are calibrated and record.
• Review of various document such as WPS, SAN, PQR, WQT, PRC and PCP prior to production welding.
• Perform inspection before welding such as part preparation, welding machine setting; preheat temperature and other relevant parameters in line with the applicable approved WPS.
• lnspect after welding to ensure parts welded as per drawing / customer's requirement and no welding defect.
• Perform NDT inspection on welded parts accordance to drawing specification.

Requirement:

• Able to read technical drawings
• 5 years working experience in same industry
• 5 and half working day per week
• Willing to work at Tuas South area

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

About Us

Love, Bonito is a digital-first company on a mission to empower the everyday Asian woman and inspire self-confidence. We are the leading direct-to-consumer womenswear brand, headquartered in Singapore, with an omni-channel presence across Indonesia and Malaysia, a retail franchise in Cambodia, and are fast expanding into international markets namely Japan, Hong Kong SAR China and United States of America.

Founded in 2010, we are proudly female-founded with more than 70% female representation across our organisation, leadership and STEM roles (#girlpower!). We raised a US$50M Series C round in 2021 and know that we’re on the cusp of something great, where we’re working towards becoming the most thoughtful brand globally, for the Asian female consumer, especially when it comes to our products, community and experiences.

There’s a lot more work to be done with all of our exciting plans. So we’re looking to team up with people who are wildly passionate about making an impact and be part of a dynamic team, in a workplace with no corporate BS (yes, you read that right!).

The Role

You will be responsible for ensuring that all products, processes meet the established quality standards. The role involves monitoring the quality standards of our vendors, conducting quality checks on samples, implementing continuous improvement measures.

You will work closely with cross functional teams to ensure compliance with industry regulations and customer requirements, enhancing product reliability and customer satisfaction.

You will need the ability to be both hands on and quick to think on your feet when dealing with our network of Suppliers. This is an exciting and pivotal role in the Sourcing, Production & Quality team that requires a go-getter with a positive mindset, have initiative, as well as enjoy working in a fast paced environment. 

You should have / be

• Bilingual in English and Chinese
• Self-motivated to deliver results, keeping a curious, proactive and innovative mindset
• A good sense of timeline coordination and scheduling
• Ownership of task with a mission-focused approach
• Strong attention to details
• High learning agility
• Comfortable working with data, reporting information tools and technologies to simplify production tracking processes
• Great at maintaining multitasking and execution abilities under tight deadlines
• To embrace change, manage change with a positive outlook and taking business needs as a priority
• Actively promoting effective communication to facilitate and drive resolution with internal and external stakeholders
• A passion for fashion is a must, interest in sustainability is a plus

Key Responsibilities

1. Quality Assurance and Control:

• Develop, implement, and maintain quality control standards across all assortments
• Work with 3rd Party QC inspections to conduct regular inspections and audits of production processes to ensure compliance with quality standards
• Prepare washcare labels on time upon order placement
• Review and approve materials and products before shipment
• Prepare required QC files ready for inspection
• Monitor and evaluate production processes to identify quality issues and recommend corrective actions

2. Process Improvement:

• Analyse quality data to identify trends and areas for improvement
• Collaborate with cross teams & tea leads to implement process improvements and corrective actions
• Lead initiatives to enhance product quality, reduce defects, and minimize waste
  

3. Compliance and Documentation:

• Ensure compliance with industry regulations, company policies, and customer requirements
• Maintain accurate and up-to-date documentation of quality control procedures, reports, and certifications
• Prepare and present quality reports to team leads
  

4. Supplier Relationship Management:

• Conduct monthly catch up with vendors to share back on their performance
• Understand vendor constraints and bridge internal stakeholders
• Collaborate with vendors to ensure the quality of raw materials and components
• Conduct supplier audits and assessments
  

5. Team Collaboration and Training:

• Work closely with sourcing, production, product development & commercial teams to ensure quality standards are met
• Work closely with the customer care team to address customer complaints and ensure timely resolution of quality issues
• Train and mentor staff on quality control procedures and best practices
• Promote a culture of quality awareness across the organisation

• Diploma/ Bachelor’s degree in Quality Management, Apparel Merchandising, Garment Product development
  2-3 years of experience in quality assurance/control, preferably in Apparel & Fashion
• Strong knowledge of quality management systems (QMS) and industry standards such as ISO 9001
• Experience with Lean methodologies is a plus
• Excellent problem-solving and analytical skills
• Strong communication and interpersonal skills

Key Competencies

• Attention to detail and a commitment to excellence
• Ability to work independently and as part of a team
• Strong organisational skills with the ability to manage multiple tasks
• Ability to handle pressure and meet deadlines

1. Flexible Work Arrangement

• Hybrid work and adjustable hours - as long as present during our core working hours

2. Staff Wellness

• Comprehensive corporate insurance (Fully covered visits at our panel clinics, Dental coverage, Maternity reimbursement)

3. Learning and Career Development

• Learning and development (i.e. subscription plans to best-in-class resources, personal development fund etc)
• Dedicated leadership training for those of managerial responsibilities
• Friday pm off for learning

4. #TeamLB perks

• Generous staff discount off LB products
• Corporate partnerships with a variety of companies
• Welcome to #TeamLB swag and store gift cards (get your LB work outfit on us!)
• Employee driven peer-to-peer recognition platform to honour and celebrate everyday achievements
• Internal Referral programme

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Support Project Management and Quality Assurance matters for EHS department
• Assist in daily operations of the Environmental Services.
• Follow up with laboratories to receive results on time
• Prepare draft report

Specific responsibilities:

• Support Project Management – Follow up with clients, reports etc
• Ensure that all operations are conducted within client and recognized industry health and safety requirements
• Lead Quality Assurance matters – Review reports
• Ensure that the Department Quality System is fully implemented
• Co-ordinate with Laboratory employees for quality testing and client’s requirement.
• Assist in the day-to-day operations of the Environmental Services.
• Perform any tasks as and when required by management.

Requirements:

• Graduate in Environmental Science/Engineering or equivalent
• Prior experience in field work for Environmental related services or testing is an advantage.
• Able to work independently and to coordinate several activities simultaneously
• Good communication, negotiation and interpersonal skills
• Able to maintain highest quality standard all the time
• Able to maintain good turnaround time (TAT) and on time delivery (OTD)
• Technical knowledge and experience in related field and in using quality management methods and tools
• Able to interact with all levels of management, suppliers and clients
• Works well under pressure, challenges status quo

Job Responsibilities

. Provides administrative support to ensure efficient operation of office.

. Carries out administrative duties such as filing, typing, copying, binding, scanning etc.

. Exhibits polite and professional communication via phone, e-mail, and mail.

. Supports team by performing tasks related to organization and strong communications.

. Contributes to team effort by accomplishing related results as needed.

Requirements

. Able to speak and write in both Chinese and English.

. 1 years working experience as an admin.

. Able to work independently with minimum supervision.

. Responsible, mature and well-groomed.

. Good communication skills.

Working Hours

Monday to Friday : 8.30am - 5.30pm

Job Info:

• Salary: Basic up to $3500 + AWS + VB
• Working Hours: Monday - Friday (8:30am - 5:30pm)
• Location: Jurong East

Job Scope:

• To research and develop new products and services
• Research competitors' products and evaluate their detailed functions
• Conduct market research on security systems in the ASEAN region
• Collaborate with Japan HQ R&D and China R&D center for product development
• Survey existing and future infrastructure, including electrical power and telecom networks, to ensure product compatibility
• Provide field technical support by visiting clients to check and maintain CCTV surveillance systems
• Assist in obtaining technical certifications for new and existing products in various countries
• Design and develop test plans for security alarm systems, CCTV systems, and access control systems, adhering to industry standards
• Perform rigorous testing of system components such as control panels, sensors, cameras, access readers, and communication devices
• Simulate real-world security scenarios to identify and address potential vulnerabilities
• Maintain detailed test records and reports for future reference
• Analyze test results, troubleshoot system malfunctions, and document findings
• Collaborate with manufacturers or distributors to resolve issues and optimize system performance
• Provide technical support to internal teams across the ASEAN region
• Conduct in-depth research on emerging security technologies and their potential applications
• Analyze market trends and customer needs to identify opportunities for new product development
• Research standards like SS558, EN, and IEC for ASEAN countries
• Stay updated on the latest advancements in security technologies and testing methodologies

Requirements:

• Minimum qualification Diploma in Electronics
• Minimum of 2 years of experience in security system testing, preferably with exposure to alarm systems, CCTV systems, and access control systems
• Familiarity with testing methodologies and tools used in security system evaluation
• Strong understanding of electronic security principles and operation of various security system components
• Proficiency in basic IT knowledge is required
• Proficiency in technical documentation and reporting
• Ability to conduct presentation for internal customers and management
• Entry level with relevant internship experience is welcome

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

General Overview

The position is part of the Instrument Control and Electrical (ICE) team who is responsible for developing plans and schedules and providing advice to production and engineering team on all maintenance activities at the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Daily planning and scheduling of maintenance tasks to carry out all required preventive, corrective and predictive maintenance of ICE asset in the Terminal
• Work closely with Mechanical, HSSE team to liaise with the Production and Jetty Operations team in the planning and analysis of each work request including coordinating the acquisition of electronic work permits.
• Carry out daily morning toolbox meeting for job assignments, briefings and any ICE-MECH work coordination communications
• Proficient in SAP to be able to carry out monitoring and scheduling of ICE PM & CM workorders, maintaining of ICE master equipment list, PM plans and raising purchase requisition for spare parts etc
• Liaise with External Authority for approval for Natural Gas Equipment maintenance request
• Close communication and co-ordination with external vendors and contractors to attend in house safety induction course, carry out site survey, site execution work etc
• Review Method of Statement and risk assessments are valid for the job
• Responsible for following up and verification that all jobs for close out are properly completed in SAP
• Raise Purchase requisitions in SAP and provide scope of supply and spare part specifications and work closely with Procurement Department for evaluation of vendor quotations for maintenance service contract/technical work outsourcing, monitoring of delivery of spare parts and materials etc
• Assist in the development of Maintenance budget, provide budget forecast, monitor and manage approved budget.
• Apply Jurong Island Pass sponsorship for external vendor.

Work Experience

• Minimum 5 (Degree) years and 8 (Diploma) years of experience in an oil and gas/petrochemical E&I maintenance supervisory or E&I maintenance planning and scheduling role
• Proficient in usage of Microsoft Office computer software and SAP systems
• Excellent organizational skills and adaptability to work in dynamic environment.

Education

• Engineering Degree/Diploma preferably in Electrical/Instrumentation/Chemical Engineering discipline.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24110

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.

In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes

What will you do?

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.

• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.
• Strong analytical and problem-solving abilities.
• Excellent communication skills, both verbal and written.
• Ability to work collaboratively in a fast-paced, agile environment.
• Leadership qualities with the ability to mentor and guide team members.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Description:

• Responsible for identifying deviations in the processes and ensure that all activities are cGMP compliant, identifying corrective actions, establishing path forward activities, and appropriate documentation.
• The In-Process Quality Assurance Associate (IPQA) will focus on initial deviation investigative phases related to manufacturing process deviation.
• Facilitates the use of existing management processes regarding deviations, investigations, and preventive actions.
• Performs area assessments and ensures compliance with SOPs, Policies and Procedures.
• Responsible for responding to customer needs immediately, ensuring appropriate corrective action is taken and process controls are in place.
• Work closely with Quality Engineers and QA Management to ensure thorough and complete investigation activities.
• Administration and management of deviations/investigation in Trackwise.
• Execute the final release inspection of packaging lines.
• Perform acceptance sample analysis for validation and investigation support.
• Responsible for the review and approval of controlled documents.
• Actively communicate with customers to facilitate continuous process improvement.
• Adheres to all applicable procedures, cGMPs, company policies and any other quality or regulatory requirements. (For example: FDA etc.)

QUALIFICATIONS:

• Minimum Associate’s degree in scientific discipline or closely related technical field of study is required.
• 1-3 years of pharmaceutical and FDA is preferred.
• Understanding of the production processes used in the Pharmaceutical Industry.
• GMP experience is required.

· Position : Quality Assurance Executive (FMCG/Food)

· Location : Fishery Port Rd (West - Transport Provided)

· Working hours : Monday - Friday 8:00 am – 5:00 pm

· Salary (commensurate with experience) : Up to $3800 + Meal Allowances + Phone Allowances + Performance Bonus + 14 Days Annual Leave

· Duration : Permanent

· Industry : Food Manufacturer/Supplier

Main Responsibilities:

· Implementation, administration, updates Quality Assurance manual and procedures, policies, programs and systems.

· Audit and inspect overall factory condition according to AVA, HACCP requirement

· Lead in sustaining SFA- ISO 22000/HACCP yearly surveillance audit

· Report factory daily products safety and hygiene performance, analyse and provide assurance to top Management

· Record all QC documents in factory and whole company

· Analyse quality of raw and finished products

· Establish necessary procedures or work instruction to accommodate inspection needs

· Ensure production process is under control as specification

· Conduct suppliers’ quality audits for compliance, prepare quality and feedback reports.

· Assists in resolving customer quality and safety concerns

· To liaise with authorities (eg, SFA) on related Food Safety / License issues when required.

· Conduct hygiene training, daily inspection of process workers, process rooms and related areas

· In charge of health certificate application and laboratory reports arrangement and maintenance of such records.

· Audit critical categories for quality integrity and food safety.

· Any other QA/QC duties as assigned by the company

Requirements:

· Diploma/Degree in Food Science/Food Technology/Microbiology or related disciplines.

· Minimum 1-3 years of relevant working in Quality and Regulatory related field in Food, preferably from FMCG

· Knowledge of Food/Product regulatory requirement and registration/licensing requirement

· Familiar with manufacturing/sampling processes and retailer QA/QC practices

· Experience in HACCP/ISO 22000 and Food safety is preferable.

· Familiarity/experience in internal auditing is preferred

· Bilingual in English and Mandarin to converse with Mandarin speaking associates

Email to: [email protected] or call me at: 6398 5682 for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

**We do not charge our candidates any referral fee nor bind them with any contract.**

Diana Okta Tio

Deputy Consulting Director (APAC)

Reg no.: R2094678

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

OPERATIONAL

To design and perform detailed designing for machine electrical control systems.

To write Programmable Logic Control (PLC) program for automatic machine control & processes. Preferably, with Industrial PC (IPC) programming experiences too.

To collaborate and work together with the Design Team (comprising of both mechanical & electrical members) for the design concept arising from new projects proposal and confirmed projects.

To lead the in-house electrical staff and/or the company’s appointed electrical vendors on the respective machine control and electrical systems and operations of the projects.

To lead the assembly members & technicians during Machine set-up, Machine Assembly Process, Alignment, Testing & commissioning in the Company and/or customer site.

To spearhead meetings and review with the design team and the customers on control system requirements and specification.

SMART FACTORY TECHNOLOGIES & AI PLATFORM

To undertake robotics programming or programming as well as commissioning on the Industrial Robots, MIR and other collaborative robotics systems.

To Conduct 2D and 3D camera application evaluations.

To team up with cross-disciplinary teams of engineers & specialists focusing on smart factory technologies & projects.

To ideate and build robust data and digital technology driven solutions for advanced manufacturing / industrial processes.

To leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs.