• Read and interpret engineering drawings to identify dimensions, tolerances, and other specifications.
• Perform quality checks using measuring tools and gauges to ensure components and assemblies meet the required specifications.
• Visually inspect camera assemblies at various stages of production, following defined quality control procedures and checklists.
• Operate test equipment to verify functionality of cameras, following work instructions.
• Identify and document any defects or non-conformities, recording detailed information for corrective action.
• Work collaboratively with production personnel to identify and resolve quality issues.
• Maintain accurate inspection records in Excel spreadsheet and complete necessary paperwork.
• Assist with the implementation of quality improvement initiatives.
• Assist Production Team with assembly or rework of cameras when needs arise.

Requirements

• Minimum Diploma holder
• Salary will depend on relvant experiences and qualification

5 day work week in a office setting

AWS

Medical & Dental benefit

About The Role

This role in the Asset Owner’s team will contribute directly to the future of Prelude-Crux Asset by Supporting organisational, procedural and process readiness to operate the Crux facility throughout its lifecycle (manned and unmanned modes).

The key responsibilities are:

• Supporting to ensure that Prelude is ready to operate Crux at the earliest practical time.

• Enabling and facilitating delivery of the Operations Readiness Team during Detailed Design activities, with a focus on integration with Prelude.

• Ownership of the long-term objective of the Crux project, with a proactive and can-do aptitude, including early input beginning in Detailed Design

• Ensuring end-to-end integration and alignment with Prelude processes, equipment, and procedures to facilitate the successful end-to-end processing of Crux products.

During the Detailed Design Phase:

1. Contribute to updates to Prelude Competency Development and Assurance AMS documentation and procedures due to Crux changes.

2. Bring a high level of ESP skill, knowledge and consistency as a dedicated resource, and hence facilitating and enabling the Project ORA Teams delivery, as the future asset owner.

3. Provide dedicated and consistent Prelude Support to the Operator Training Simulator (OTS), to ensure delivery of stress tested training scenarios and start-up scenarios for planning.

4. Provide dedicated and consistent Prelude Support for development of Crux DCS HMI’s and graphics, and any updates required for Prelude graphics.

5. Ensuring Prelude’s readiness to receive Crux at the earliest practical point in time, and supporting the development of elements of the Crux Readiness / P2A Process.

During the Commissioning and Start Up Phase

6. Ensuring Operations and maintenance team organisational competency and capability in respect to Control Room Operator requirements, including OTS and development of additional Prelude operator requirements.

7. Contribute to walk downs, loop testing, function testing, Right First Time program, ensuring delivery of project outcomes.

8. Responsible for Start-up of Crux from the Crux platform.

During the Operate Phase

9. Transitions from the Crux platform, to be located onboard Prelude on the dedicated Crux Operator Work Station.

10. Ensure operation within the design envelop, utilising FSR and operational risk assessments where required.

11. Adhere to and promote safety and environmental procedures to ensure safety of personnel, plant and environment.

12. Enabling the early identification, diagnosis and rectification of process issues as they arise.

13. Coordination of work activities with Crux offshore team, ensuring effective work execution and operation of the Permit to Work and Safe Isolation processes.

14. Working closely with onshore organisation to drive safe, reliable, and efficient Crux performance, and ensure threats to the safe, reliable, and predictable production plan are identified, managed, and meet the requirements of AMS processes

15. Leading, supporting and coaching to embed Shell’s D&I aspirations recognizing and advocating the necessity of diversity and Respect for a successful business.

16. Leading the offshore learner mindset culture to drive continuous improvement

Job Requirements

• Prelude experience is preferred.

• A diploma/certificate in Production Operations with experience as a Control Room Operator is essential.

• Experience in a Major Hazard Facility environment to ensure safe and consistent operation of production

processes.

• Experience in using dyamic process simulators and Operator Training Simulators is preferred.

Skills & Competencies

• Skill in ESP Operations, Safe Isolations and Permit to Work Processes, as well as PME Maintenance process.

We are seeking a detail-oriented and enthusiastic Software Quality Assurance (SQA) Engineer to join our team. The SQA Engineer will be responsible for supporting the SQA efforts and ensuring the quality of our software products. They will work closely with the development scrum team and other stakeholders and participate in feature definition, requirement verification, and testing methodologies.

Key Responsibilities:

• Participate in developing and implementing comprehensive testing strategies and processes for software products
• Collaborate with the product and development team to contribute to the release management strategy, ensuring the successful and timely delivery of high-quality software products
• Collaborate with cross-functional teams to identify and prioritize test cases, develop test plans, and execute test cases
• Create and maintain testing documentation such as test plans, test cases, and test reports
• Identify, track, and manage defects and issues through their lifecycle
• Work with the development team to identify and resolve quality issues in a timely manner
• Support investigation of reported field issues to identify root cause
• Provide feedback to the development team on design and functionality to ensure high-quality products
• Collaborate with software development teams to identify and resolve system defects
• Document and communicate test results, and track software bugs and their resolution

Requirements:

• Bachelor's degree in Computer Science, Software Engineering or related field
• 2+ years of experience in software quality assurance and testing
• Basic understanding of software testing methodologies and best practices
• Experience in writing test scripts using Gherkin and Cucumber for functional, integration, and regression testing
• Experience with API, web application and mobile application testing
• Experience with creating MongoDB queries
• Familiarity with test automation tools and frameworks such as Selenium, Appium, and JMeter
• Familiarity with programming languages such as Java, Python, or JavaScript
• Familiarity with agile development methodologies such as Scrum or Kanban
• Excellent communication and problem-solving skills
• Attention to detail and ability to work independently

Key Responsibilities :

• Ensure Accounts Receivables are updated daily into the system and all documents is properly filled.
• Monitor and follow up with customers to ensure timeliness and effectiveness in collection and meeting of collection targets.
• Analyze customers’ payment pattern and trend.
• Ensure month end closing on Account Receivables are as scheduled.
• Conduct regular credit control reviews of key customers.
• Weekly reporting and meeting with the team to resolve any AR related issues.
• Prepare Debtor Aging Report, Debtor Statement, and other reports as deemed necessary.
• Follow up with Sales Team members on verbal orders.
• Undertake any other task as and when assigned.

Job Requirement :

• Diploma in Accounting / Business Administration
• Strong analytical skills and the ability to take initiative and prioritize
• Willing to work in fast paced and multi-task environment
• Good Microsoft Excel skills.
• Ability to meet deadlines and take-on new tasks and eager to learn

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Resposible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 5 years Experiences in Civil and Structural sector in SG process plant.

The Quality Control officer/supervisor is responsible for the maintenance and improvement of operational service quality. Reporting directly to our Singapore BU Head, you will work cross-functionally with our various Business Units (BUs) including Freight, Cross-Border and Supply Chain Management to drive overall operational excellence.

Key responsibilities:

· Lead ongoing monitoring of key operational metrics and data reporting

· Drive performance improvement based on key operational metrics

· Develop and implement internal quality control standards

· Analyse existing operational flows and highlight potential process weaknesses

· Evaluate and execute process improvement opportunities

· Work closely with BUs to ensure adherence to operational processes and SLAs

Requirements:

· 2 to 4 years of working experience in roles related to quality control or data analysis

· Previous exposure to e-commerce and/or logistics sector(s) highly advantageous

· High level of resourcefulness and adaptability

· Collaborative and data-driven approach to problem solving

· Able to work independently and with high attention to detail

· Language proficiency in both English and Chinese (reading, writing and verbal) is a must for liaison with HQ and Chinese speaking stakeholders

· Proficiency in Microsoft Excel and PowerPoint

The Quality Control officer/supervisor is responsible for the maintenance and improvement of operational service quality. Reporting directly to our Singapore BU Head, you will work cross-functionally with our various Business Units (BUs) including Freight, Cross-Border and Supply Chain Management to drive overall operational excellence.

Key responsibilities:

· Lead ongoing monitoring of key operational metrics and data reporting

· Drive performance improvement based on key operational metrics

· Develop and implement internal quality control standards

· Analyse existing operational flows and highlight potential process weaknesses

· Evaluate and execute process improvement opportunities

· Work closely with BUs to ensure adherence to operational processes and SLAs

Requirements:

· 2 to 4 years of working experience in roles related to quality control or data analysis

· Previous exposure to e-commerce and/or logistics sector(s) highly advantageous

· High level of resourcefulness and adaptability

· Collaborative and data-driven approach to problem solving

· Able to work independently and with high attention to detail

· Language proficiency in both English and Chinese (reading, writing and verbal) is a must for liaison with HQ and Chinese speaking stakeholders

· Proficiency in Microsoft Excel and PowerPoint

Responsibilities:

• To implement and maintain all quality and food safety control processes which are compliant to company’s FSSC22000 standard and relevant statutory requirements.
• To conduct inhouse food safety training to production/ operations staffs.
• To manage customer complaints investigation and perform troubleshooting and drive process improvement program to ensure high standard of food safety and quality.
• Responsible for conducting in-house swabbing test such as equipment, hand, packaging and coordinating with third party lab to arrange for air, water, equipment swab, hand swab, packaging swab.
• Monitor and report pest activities to ensure good hygiene in warehouse and production.
• Responsible for raw material sample drawing.
• Handle 2nd & 3rd party audit like FSSC22000, SFA and other relevant audits. To be appointed QP for SFA and also apply for Free Sale Certificate and other SFA certs when applicable.
• Ensure all relevant documents are in place before production start.
• Support in line production check on CCPs, OPRPs and in-line checking of the products such as FOC. Highlight immediately to the Superior/Manager should there be any non-compliances.
• Support in line production checks such as correct raw material usage, correct packaging are use, correct stencilling information and ensuring that changeover / flush out are done accordingly.
• Support in production to ensure finished goods samples are collected and ensuring that correct samples are collected by the productions.
• Responsible for equipment preventive and maintenance and periodic calibration.
• Maintain good record keeping for audits and certification renewal.
• Perform ad-hoc duties as assigned by management.

Requirements:

1. Diploma / Degree in Food Science / Food Technology or other Science or related disciplines.
2. Minimum 1 year work experience in QAQC related field in food industry, preferably from food manufacturing.
3. Familiar with food regulatory / retail hygiene requirement is an added advantage.
4. Strong knowledge (implementation, maintenance and experience in the audit requirements) in FSSC22000 is preferred.

Job Description:

As a Project Control Manager in the oil and gas industry, your primary responsibility will be to oversee and manage the project control activities for various oil and gas projects. You will be responsible for ensuring that projects are completed within budget, on schedule, and in compliance with regulatory requirements. Your role will involve coordinating with project teams, monitoring project progress, analyzing performance metrics, and implementing strategies to mitigate risks and optimize project outcomes.

Key Responsibilities:

1. Develop and implement project control processes, procedures, and systems to effectively manage project scope, schedule, cost, and quality throughout the project lifecycle.
2. Coordinate with project managers, engineers, contractors, and other stakeholders to establish project objectives, deliverables, and timelines.
3. Establish project baselines for scope, schedule, and budget, and regularly monitor and report on project performance against these baselines.
4. Identify potential risks, issues, and deviations from project plans, and develop mitigation strategies to address them proactively.
5. Monitor project expenditures, track project costs, and analyze cost variances to ensure adherence to budget constraints and identify opportunities for cost savings.
6. Develop and maintain project schedules, including critical path analysis, resource allocation, and milestone tracking, to ensure timely completion of project deliverables.
7. Prepare regular project status reports, progress updates, and performance dashboards for project stakeholders, including management, clients, and regulatory agencies.
8. Conduct project performance reviews, lessons learned sessions, and post-project evaluations to identify areas for improvement and best practices.
9. Ensure compliance with regulatory requirements, industry standards, and contractual obligations throughout the project lifecycle.
10. Provide leadership, guidance, and mentoring to project control team members, ensuring their professional development and effective contribution to project success.

Requirements:

1. Bachelor's degree in Engineering, Project Management, Business Administration, or related field. A Master's degree or professional certification (e.g., PMP, PMI-SP) is preferred.
2. Proven experience (10+ years) in project control, project management, or related roles in the oil and gas industry, with specific experience in upstream, midstream, or downstream projects.
3. In-depth knowledge of project management methodologies, techniques, and tools, including project scheduling, cost control, risk management, and change management.
4. Familiarity with oil and gas industry practices, processes, and regulations, including safety standards, environmental regulations, and permitting requirements.
5. Proficiency in project management software, such as Primavera P6, Microsoft Project, or equivalent tools, for scheduling, budgeting, and reporting.
6. Strong analytical skills, attention to detail, and ability to interpret and analyze complex project data and performance metrics.
7. Excellent communication and interpersonal skills, with the ability to collaborate effectively with diverse project teams and stakeholders.
8. Demonstrated leadership abilities, including the ability to motivate, inspire, and influence others to achieve project objectives.
9. Ability to work effectively under pressure, manage multiple priorities, and adapt to changing project requirements and deadlines.
10. Willingness to travel to project sites, as required, and work in a dynamic and challenging environment typical of the oil and gas industry.

JOB DESCRIPTION:

• Responsible for day-to-day business data management and regular business report preparations, which includes SAP material master maintenance, data integrity checking and statistics.
• Daily monitoring of basic system health and to flag out any inconsistency in API/System functions when found/reported.
• Daily monitoring of system backend jobs and ensure transactional data are interfacing in healthy state with external/internal system.
• To support Business Analytics, extracting and reorganizing original data, dealing with data related issues with other departments.
• Responsible for data preparation, data mining, to create/identify opportunities through analytics, to optimize business objectives.
• Communicate findings and insights to relevant stakeholders in order to assist Manager in making data-driven decisions in KPI assessments.
• Drive continuous improvements /optimization of campaign performance tracking report with business while complying to A*STAR policies.

REQUIREMENTS:

• Bachelor's Degree or Diploma (with at least 5 years or more relevant experience), preferably Business Analytics, Information systems or Computer Science.
• Strong analytical skills, with experience solving problems using data and providing practical business insights.
• Self-Starter with a strong sense of urgency.
• Aptitude to challenge the status quo, think outside the box, and question what has been done.
• Comfortable with dealing with sets of data points from different sources.
• Qualities of matured thinking, dependable and requires minimum supervision.
• Excellent communication skills (oral and written).

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Responsible for Quality, speed, flexibility, and reliability of assigned commodities.
• Supports factory operations through fast resolution of supplier non-conformances, including short term containment, root cause identification, and long term, effective corrective actions.
• Work with cross functional teams to resolve supplier quality issues in a timely and systematic fashion.
• Ensure suppliers follow robust change management processes to maintain and improve product quality and production performance.
• Identify supplier related problems and improvement opportunities. Perform root-cause investigation, implement corrective actions improve supplier performance.
• Timely communication of supplier issues that affect product quality and delivery capability to the relevant stakeholders across the organization.
• Maintain lessons learned from various investigations to assist in development and sharing of best practice
• Acts as the internal expert on assigned commodities.

Requirements:

• Degree in Mechanical or Electrical / Electronics Engineering or any relevant.
• At least 5 years of experiences in handling suppliers, within manufacturing industry.
• Working knowledge and trained in Lean techniques; SPC, 6-Sigma (Green Belt) is an advantage
• Knowledge of ISO 9001:2015 Quality System and Working knowledge of Supplier and Process
• Good communication and interpersonal skills.
• Training and/or certification as Certified Quality Engineer (CQE) will be an advantage.

Work Location: 452 Alexandra Road, Singapore 119961

----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

1. Leadership and Management: Quality Manager requires strong leadership committed to quality improvement. Leaders set the vision, goals, and strategies for TQE implementation, allocate resources, and provide support and guidance to employees.
2. Quality Planning: This involves setting quality objectives, identifying customer requirements, establishing processes to meet those requirements, and developing plans to achieve continuous improvement.
3. Training and Education: Quality Manager emphasizes the importance of training and educating employees at all levels of the organization to ensure they understand quality concepts, tools, and techniques, and can contribute effectively to improvement efforts.
4. Quality Control: Monitoring and measuring processes and outputs to ensure they meet quality standards. This may involve statistical process control, inspections, audits, and other quality control techniques.
5. Quality Improvement: Identifying opportunities for improvement, analyzing root causes of problems, implementing corrective and preventive actions, and continuously striving to enhance processes and products/services.
6. Customer Focus: Understanding customer needs and expectations, gathering feedback, and using it to improve products/services and enhance customer satisfaction.
7. Supplier Management: Working closely with suppliers to ensure they meet quality standards and deliver high-quality inputs, materials, and components.
8. Employee Involvement and Empowerment: Encouraging and empowering employees to participate in quality improvement efforts, share their ideas and suggestions, and take ownership of quality-related activities.
9. Measurement and Analysis: Collecting and analyzing data to track performance, identify trends, measure progress toward quality objectives, and make data-driven decisions.
10. Continuous Improvement: Establishing a culture of continuous improvement where all employees are encouraged to seek opportunities for improvement, experiment with new ideas, and learn from successes and failures.
11. Communication and Collaboration: Facilitating open communication and collaboration across departments and levels of the organization to ensure alignment of quality goals and efforts.
12. Documentation and Documentation Control: Maintaining accurate records of quality-related activities, processes, and outcomes, and ensuring proper documentation control to prevent errors and ensure compliance with quality standards and regulations such as ISO 9001-2015.

1. Able to handle Audit & ISO 9001-2005
2. Leadership and Management: Total Quality Engineer requires strong leadership committed to quality improvement. Leaders set the vision, goals, and strategies for TQE implementation, allocate resources, and provide support and guidance to employees.
3. Quality Planning: This involves setting quality objectives, identifying customer requirements, establishing processes to meet those requirements, and developing plans to achieve continuous improvement.
4. Training and Education: TQM emphasizes the importance of training and educating employees at all levels of the organization to ensure they understand quality concepts, tools, and techniques, and can contribute effectively to improvement efforts.
5. Quality Control: Monitoring and measuring processes and outputs to ensure they meet quality standards. This may involve statistical process control, inspections, audits, and other quality control techniques.
6. Quality Improvement: Identifying opportunities for improvement, analyzing root causes of problems, implementing corrective and preventive actions, and continuously striving to enhance processes and products/services.
7. Customer Focus: Understanding customer needs and expectations, gathering feedback, and using it to improve products/services and enhance customer satisfaction.
8. Supplier Management: Working closely with suppliers to ensure they meet quality standards and deliver high-quality inputs, materials, and components.
9. Employee Involvement and Empowerment: Encouraging and empowering employees to participate in quality improvement efforts, share their ideas and suggestions, and take ownership of quality-related activities.
10. Measurement and Analysis: Collecting and analyzing data to track performance, identify trends, measure progress toward quality objectives, and make data-driven decisions.
11. Continuous Improvement: Establishing a culture of continuous improvement where all employees are encouraged to seek opportunities for improvement, experiment with new ideas, and learn from successes and failures.
12. Communication and Collaboration: Facilitating open communication and collaboration across departments and levels of the organization to ensure alignment of quality goals and efforts.
13. Documentation and Documentation Control: Maintaining accurate records of quality-related activities, processes, and outcomes, and ensuring proper documentation control to prevent errors and ensure compliance with quality standards and regulations.

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking for a Quality Control Analyst with experience in pharmaceutical industry for a role in Singapore.

Job Summary:

Support the Microbiology Laboratory in SGBO Singapore QC for the establishing and maintaining
of Utilities Monitoring of the SGBO Singapore Facility in Singapore. Perform sampling and testing
under supervision, following written procedures and specifications, and in accordance with
Local/international regulations.

Key Accountabilities:

• Supports activities to establish and maintain a Microbiology lab in full cGMP-compliance.
• Supports activities to conduct/perform necessary sampling/test methods or compendia
  methods in the lab and site under cGMP
• Follows existing procedures and methods, and perform sampling/testing following routine activities :

 - HVAC Viable and Non -viable particle sampling and surface sampling

 - Pharmaceutical Water and Clean Steam Condensate sampling for Biological and

 - Chemical tests

 - Compressed Gases; Biological Chemical and Physical sampling and testing

 - Data compilation

 - Data evaluation and trending support

• Receives training and analyst qualification to perform sampling/testing under cGMPs.
• Follows the priorities for sampling/testing provided by lab management.
• Ensures sampling/testing is performed in a timely manner.
• Participates in Laboratory investigations.
• (after sample testing) Compiles test documents in a complete, accurate and consistent manner to ensure that samples, materials or products and intermediates have been tested, or inspected according to specification and cGMPs.
• Suggests optimizations of test procedures to improve efficiency whenever possible.
• Be able to explain, his/her area of work, in health authorities inspections and internal audits

Performance Indicator:

• Delivery of results on time and with quality (e.g. timely testing)
• Adherence to established KPI targets related to QC activities
• Open communication; Concise and clear communication skills

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Maintain standards and quality processes in food manufacturing operations;

• Conduct daily in-process quality control inspections at production lines to ensure alignment with internal requirements and Good Manufacturing Practices
• Maintain integrity, accuracy and completeness of QC data and records
• Perform routine calibration and maintenance of equipment
• Assist in export documentation consolidation and Health Certificate application
• Assist in monitoring and inspecting company infrastructure, equipment and utilities
• Develop and implement quality control procedures and protocols to improve overall product quality and consistency.
• Inspect in-coming and out-going products according to receiving and shipping policy
• Review and validate supplier raw material records and results (COA)
• Process improvements initiatives across the company

Conduct tests for food quality and packaging;

• Sensory evaluation of products aligned with specification
• Perform product sampling for laboratory tests

Rectify non-compliance issues (Customer Complaints / Audit findings);

• Support traceability investigations into lapses in quality, hygiene standards and non-compliance to quality standards. Conduct investigation and follow up with corrective action

Conduct training for production staff on quality control procedures, GMP practices, and food safety protocols;

Job Requirements

• Minimum 1 year of relevant working experience / Diploma in Food Science or related field.
• Knowledge of food safety standards and GMP principle
• Proactive, willing to learn and good follow-up skills
• Able to work independently with minimal supervision

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 12th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office)” for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects.
• Providing premium In-house Banking applications,

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

Mission

As an intern, your mission is to become a valuable asset to our organization by:

• Interacting Comfortably with People: Building strong collaborative relationships within the team and stakeholders.
• Automation and Development: Demonstrating a deep passion for development, specially in

1. Technologies: Java/J2EE, Shell Scripting, PL/SQL, SQL
2. Database: Sybase, Oracle, PostGreSQL
3. Browser Automation: Selenium
4. BDD Framework: Cucumber
5. Source Code/Lifecycle Management: SVN/GIT, Jenkins, Gitlab, Ansible, MasterDeploy

• Interest in Bank activities: Apetite to understand the business activities of the bank on Capital Markets.
• Process automation: Appetite for continuous improvement and automation. Of new as well as existing process to enhance efficiency and reduce the TAT.

During your internship, you will have the opportunity to:

• Learn about Global Market Front Office activities, Financial Data, Transaction Reporting, Market Data, Risk Indicators and Regulaotry requirements – opportunity to learn end-to-end invensment banking workflow.
• On the job training to directly apply your learning and be impactful.
• Gain insights into Software Development, understand the SDLC and its real-life implementation.
• Collaborate with Subject Matter Experts, including Business Analysts, Support Analysts, Developers, DevOps Engineers, and Quality Software Developers.
• Benefit from the guidance of a dedicated mentor.
• Deliver on jobs that directly impact the banks day-to-day activities and witness the added value of your job directly from business lines.

Qualifications and Profile

Candidates should have:

• JAVA/J2EE.
• SQL, PL/SQL and UNIX/LINUX Scripting skills.
• Excellent Aptitude, Curious to learn and inquisitive.
• Excellent communication and interpersonal skills.
• Autonomous, self motivated and excellent team player.
• Fluency in English - as acting in a multi-cultural environment.

The scope will be adapted depending on the situation and the progress of the trainee.

Application Procedure

Interested applicants, please apply via the link here:

Crédit Agricole Corporate and Investment Bank (ISAP Singapore) Careers - (Internship Jul24) CMI - Software Quality Engineer (jobvite.com)

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 12th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office)” for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects.
• Providing premium In-house Banking applications,

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

Mission

As an intern, your mission is to become a valuable asset to our organization by:

• Interacting comfortably with people: Building strong collaborative relationships within the team and stakeholders.
• Automation and Development: Demonstrating a deep passion for development, specially in

1. Technologies: Java/J2EE, Shell Scripting, PL/SQL, SQL
2. Database: Sybase, Oracle, PostGreSQL
3. BDD Framework: Cucumber
4. Source Code/Lifecycle Management: SVN/GIT, Jenkins, Gitlab, Ansible, MasterDeploy
5. Automation tools and frameworks: JUnit, TestNG, Selenium

• Interest in Bank activities: Apetite to understand the business activities of the bank on Capital Markets.
• Process automation: Appetite for continuous improvement and automation of new as well as existing process to enhance efficiency and reduce the TAT.

During your internship, you will have the opportunity to:

• Learn about Transverdsal Global Market Data & MCR activities, this includes electronic trading platforms, Risk Management Systems, Market Risk, Counterparty Risk, Financial Data, Market Data, Risk Indicators requirements – opportunity to learn end-to-end invensment banking workflow.
• On the job training to directly apply your learning and be impactful.
• Gain insights into Software Development, understand the SDLC and its real-life implementation.
• Collaborate with Subject Matter Experts, including Business Analysts, Support Analysts, Developers, DevOps Engineers, and Quality Software Developers.
• Deliver on jobs that directly impact the banks day-to-day activities and witness the added value of your job directly from business lines.
• Non-regression testing of the applications and associated services (Functional, Technical, Performance, and Behavior) to identify defects or bugs that need to be fixed before the software is released in production.
• Knowledge on CI/CD pipeline
• Create and maintain comprehensive documentation for development and testing processes
• Opportunity to work on meaningful projects and make an impact.
• Mentorship and guidance from experienced professionals.
• Networking opportunities within the industry.
• A Certificate and a letter of Completion.
• Full time employment offer after successful completion of program

Qualifications and Profile

Candidates should have:

• Student of Master or Bachelor’s degree in Computer Science, Software Engineering, or related field.
• Strong passion for software development and quality assurance.
• Appetite to follow technology trend and participate to communities.
• Eagerness to learn and adapt in a dynamic software development environment.
• Strong proficiency in Java programming language.
• Knowledge of software testing methodologies and experience in QA processes.
• Understanding of Agile development methodologies.

Other Professional Skills and Mindset

• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Excellent Aptitude, Curious to learn and inquisitive.
• Autonomous, self motivated and excellent team player.
• Fluency in English - as acting in a multi-cultural environment.

The scope will be adapted depending on the situation and the progress of the trainee.

Application Procedure

Interested applicants, please apply via the link here:

Crédit Agricole Corporate and Investment Bank (ISAP Singapore) Careers - (Internship Jul24) CMI - Quality Assurance Software Engineer (jobvite.com)

Responsibilities

• Assist Quality manager to manage Quality of outsourced foundries, contract suppliers to meet AAC company & customer requirements
• Ensure implementation of customer requirements into product design, product specification, test requirements and product process controls
• Handle new product quality, qualification, validation and control plan
• Assist Quality Manager to conduct quality audits on foundries & contract suppliers, including third party audit authorized by AAC
• Manage Engineering Change Control at foundries
• Work with internal team and foundries to resolve process & quality issues in the product and manufacturing processes
• Experience to conduct failure analysis and work on 8D reports
• Benchmarking against industry practices

Job Requirements:

• Bachelor Degree in Engineering or Science or equivalent. Diploma holders with 2-3 years relevant experiences are welcomed to apply.
• Experience in semiconductor manufacturing is a plus
• Minimum 1 year of experience in quality roles
• Basic knowledge of quality tools such as FMEA, 8D, Pareto, SPC, CpK etc
• Able to effectively communicate (spoken/written) in Chinese with our vendors from China
• Willing to work at Tampines area.

KEY ACTIVITY

• This position is responsible for Implementing the quality audit and compliance monitoring system to assure the Civil Aviation Authority of Singapore (CAAS) Approved Maintenance Organization (AMO) processes and procedures are being followed, capable of delivering safe aviation products and in compliance with the SAR Part 145.
• Assume the position of Safety Manager and implement the safety management system for the AMO.
• Supervising and directing all personnel nominated to be certifying staff for the AMO.
• Liaising with CAAS and/or any certification bodies, e.g. ISO 9001, ASA, etc. on matters relating to the quality system and safety management system.

QUALIFICATIONS

• Aviation experience of no less than 5 years with at least 3 years in quality assurance / quality control experience in a managerial or supervisory capacity.
• Possess Polytechnic qualifications in Mechatronics/Mechanical/ Electrical/Aerospace or Quality Management or its equivalent. A degree in Engineering will be advantageous.
• Passed CAAS papers: Air Law (M10/L11/L12) and preferably in Human Factors.
• Completed a lead auditor course in quality management or its equivalent.
• Holding or has held a CAAS aircraft maintenance license or CAAS approved workshop certifying staff qualification is an advantage.
• Ability to read and write English.

ROLES AND RESPONSIBILITY

• Establishing and maintaining a compliance monitoring system to assure the CAAS approved maintenance organization (AMO) processes and procedures are being followed, capable of delivering safe aviation products and in compliance with the SAR Part-145.
• Planning and conducting independent audits on the AMO maintenance activities and the contracted service providers.
• Providing independent advice to the Accountable Manager relating to the implementation and maintenance of the safety management system.
• Administrating the quality feedback system to report on the performance of the quality system. safety management system and audit findings to the Accountable Manager.
• Assisting the Accountable Manager to develop improved methods and procedures for the performance of quality assurance and safety management functions.
• Assisting, supervising and directing all personnel nominated to be certifying staff for the AMO.
• Establishing and maintaining the requirements for initial and recurrent training for personnel involved in the maintenance and preventive maintenance of aviation products.
• Assessing and authorizing suitably qualified personnel to perform inspection functions for the AMO.
• Issuing SAR-145 certification authorizations to suitably qualified personnel to issue the certificates of release to service for the products or parts maintained by the AMO.
• Maintaining the AMO rosters and ensuring that changes in job personnel or job duties are reflected on the roster.
• Ensuring the training and qualification records of the AMO personnel are kept securely and orderly.
• Ensuring the maintenance organization exposition (MOE) and Safety Management System (SMS) manual are current and accurate, updating CAAS on all revisions status.
• Liaising with CAAS and/or any certification bodies, e.g. ISO 9001, ASA, etc. on matters relating to the quality system and safety management system.
• Reporting safety related occurrences that fall under the mandatory occurrence reporting criteria to the CAAS and conducting safety investigation as required.
• Conducting surveillance on the AMO facilities, procedures, and the availability of proper inspection records, reports, and forms used by the AMO are available to all inspection personnel.
• Ensuring procedures used in the procurement and receipt of aircraft parts are effective to detect "bogus" and "unapproved" parts from entering the parts system, and any such parts are detected before their use.
• Ensuring periodic checks are made on all inspection tools and the calibration of precision equipment used by the AMO including the current records of those inspections and tests are maintained.
• Determining all technical data on components overhauled or repaired by the AMO are kept current with latest revisions. This data includes manufacturer's overhaul manuals, service bulletins, part specifications, related CAAS approved data, and other technical data used by the AMO.
• Maintaining and keeping current a regulatory library including the applicable CAAS aviation regulations and airworthiness directives.
• Establishing and maintaining the capability listing of the aviation products in accordance with the CAAS approval ratings held by the AMO.
• Providing the necessary technical documents to the customers and storage of the AMO technical records.
• Performing safety management duties as required by the Accountable Manager

REPORTING LINE

This position reports directly to the Accountable Manager.

• Responsible for overall Quality Engineering strategy development and providing oversight and control for quality engineering functions at Small Ag & turf Asia Manufacturing factories.
• Responsible for setting quality engineering goals for the Small Ag & turf Manufacturing Asia.
• Directs and controls new product introduction process from quality engineering perspective at Small Ag & turf Asia Manufacturing factories.
• Reviews qualify performance for the units on regular frequency.
• Guides Small Ag & Turf Asia factories to develop and implement ISO standard processes in alignment with internal Quality and Production System requirements.
• Communicates with Product Support and Marketing organizations to understand the customer sentiments.

The essential responsibilities include:

• Manage, motivate, coach, and develop the Assembly staff.
• Ensure overall adherence to safety practices.
• Review the quality of products including all incoming shipments.
• Performance manage team members, giving direction and feedback to aid good performance
• Check and verify customers' complaints
• Handle customers' product warranty & repair issues via phone calls and emails.
• Fixing and repairing minor defects of products.
• Prepare documents for customer service items to return to retail stores.
• Perform any other tasks as and when assigned

Formal Education & Certification

• Secondary Education or relevant experience

Knowledge & Experience

• Minimum 5 years of relevant experience managing a team in QC setting
  Experience in supervising different shifts
• Proven ability to effectively coach & monitor QC assistants to lead and achieve desired performance goals & objectives
• Good understanding of budgeting and resource allocation
• Experienced in and a desire to lead change and work with others to implement new practices, roles, and structures

Personal Attributes

• Ability to strategically plan for the future, combined with the ability to deliver on details
• A team leader and analytical thinker with strong administrative, decision-making, time management and organizational skills
• Good interpersonal skills – ability to work and interact with all levels of management and stakeholders
• Motivational skills and an ability to supervise and lead a team
• Positive attitude
• Strong problem-solving and conflict-resolution skills
• Ability to work effectively under pressure
• Good active listening skills
• High level of initiative and integrity

Brief Summary

• Basic $5000 + AWS + VB + Medical benefits
• 5 Days | Mon-Fri 8.30am-5.30pm
• Working Location @ East area

Responsibilities

• To lead the quality improvements through working with all relevant departments and suppliers on the Kaizen activities.
• To understand customer manufacturing quality requirements & align with the business agreement so as to work effectively with all suppliers to achieve KPI target for the line rejection.
• Perform analysis on internal defects and drive improvements from relevant departments to achieve quality KPI.
• To lead & work with MRB team on the OSV activities so as to meet supplier's requests before any RMA / RTV process
• To collaborate with the internal team and provide support to Quality System Lead in all certifications required for the products as stated by the customer

Requirements:

• Minimum 1-2 years of relevant working experience
• All are welcome to apply.

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**


EA Reg. No: R1988238 | Erlynn Tay Kim Geok

• can work on public holidays
• can stand/work for long hours
• can work on shifts/change of shifts
• at least 10 years experiences

• help create solutions as part of an engineering team

• work to find defects, determine the causes of those defects and provide solutions to defected problems

• Determining quality improvement factors

• Implementing methods to inspect, test and evaluate the reliability of manufacturing processes, products and production equipment

• Making sure processes adhere to quality standards

• Preparing reports by collecting, analyzing and summarizing data

• Working in accordance with deadlines for delivery of products or software

Work Your Magic with us!

Ready to explore, break barriers, and discover more? We know you’ve got big plans – so do we! Our colleagues across the globe love innovating with science and technology to enrich people’s lives with our solutions in Healthcare, Life Science, and Electronics. Together, we dream big and are passionate about caring for our rich mix of people, customers, patients, and planet. That's why we are always looking for curious minds that see themselves imagining the unimaginable with us.

Your Role

Quality Assurance Specialist is to promote and integrate quality into every aspect of our BioReliance® biologics safety testing business in Singapore. The role is to perform batch record review (i.e. data audits) to support all aspects of quality operations to ensure that laboratory testing operates in full compliance with sound scientific practice, GxP and Standard Operating Procedures (SOPs). The scope of responsibility is to contribute or impact the results of the QA team and is accountable for the quality of own work, solve problems of low complexity independently by identifying and selection solutions and by analyzing information.

The post holder will be able to perform the following functions independently, with minimal guidance.

What You Do

• Batch record review: Review and approval of GxP documents, including Protocols, Technical Specification (TS), Batch Records, Workbooks, SOPs and all other QMS documentation.
• Batch record review: Comply with all applicable policies, procedures and guidelines.
• Batch record review: Conduct in-process or final audits and approval on manufacturing or testing documentation as they comply with the stated regulatory standards and the approved TS, protocol or SOPs.
• Batch record review: Release of the certificate of analysis for GMP testing against the TS and associated documentation.
• Batch record review: Prepare QA statement within each GLP final report specifying inspections date, and dates findings were reported to the Study Director and management.
• Review and approve deviations, anomalous results, OOS, positive results and CAPAs.
• Assist in investigations from events, complaints or data audits.
• Conduct trend analysis for deviations and review / approve applicable CAPA records.
• Assist self-inspections to ensure continuous improvement.
• Perform and support client audits, regulatory inspections.
• Perform and support internal audits.
• Perform and support supplier audits.
• Comply with Health and Safety Executive regulations and undergo relevant training modules when required and actively takes necessary action when encountering unsafe situations.
• Perform their duties according to the principles of Good Laboratory (GLP), Good Manufacturing Practice (GMP) and Good Clinical Practice (GCP).

The above list of job duties is not exclusive or exhaustive and the post holder will be required to undertake such tasks as may reasonably be expected within the scope of the post. Job descriptions will be regularly reviewed to ensure they are an accurate representation of the post

Who You Are

• Graduate degree in life sciences or higher related degree
• Minimum of 2 – 4 years of experience, within a similar Quality Assurance role i.e. batch record review.
• Shows a desire and motivation to work in Quality and regulated environment.
• Awareness of Biologics regulatory environment and GMP manufacturing topics.
• A proactive approach to all aspects of Quality.
• Fluent in both written and spoken English.
• Good communicator, dealing directly and effectively with operational teams and site QA and lab colleagues routinely.
• Strong analytical and problem solving abilities.
• Organized and logical in defining workload and delivering projects.

What we offer: We are curious minds that come from a broad range of backgrounds, perspectives, and life experiences. We celebrate all dimensions of diversity and believe that it drives excellence and innovation, strengthening our ability to lead in science and technology. We are committed to creating access and opportunities for all to develop and grow at your own pace. Join us in building a culture of inclusion and belonging that impacts millions and empowers everyone to work their magic and champion human progress!

Apply now and become a part of our diverse team!

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• To keep abreast of the current state-of-the-art motion control algorithms
• To develop a variety of trajectory tracking algorithms (path and speed profile)
• To account for vehicle dynamics subject to variable loading of towed trailers
• Software design and development

Required experience

• Ideally 1+ years of experience in control research domain.
• Bachelors in computer science, Robotics, or related fields
• Strong familiarity with control systems, robotics, autonomous vehicles
• Strong familiarity with trajectory optimization
• Experience with research in robotics or related fields involving realistic agent motion
• Experience with C++ in a Linux environment
• Flexible problem-solver

Bonus experience

• Experience with ROS or other similar middleware
• Experience with data structures, object-oriented programming
• Experience with real world robotics deployment
• Experience in data-analysis
• Experience in simulation

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!