Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

1. Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
2. Preparation of reagents/diluents/ dissolution media as per STP.
3. Perform a various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
4. Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
5. Ensure implementation of SOP for all corresponding activities.
6. Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
7. Ensure real time documentation, maintain data integrity and appropriate traceability.
8. Assist in maintenance and calibration of test instruments per specifications.
9. Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
10. Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
11. Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
12. Responsible for QC lab and equipment/instrument cleanliness.
13. Responsible for procuring and receipt of QC lab glassware and consumables.
14. Any other activities as and when assigned by the Superior.

General Overview

This position is part of the Instrument, Control and Electrical team that provides maintenance and technical support to the Production, Mechanical and Project teams in the LNG Terminal. This position is responsible for establishing, reviewing and overseeing the relevant instrument & control design of newly build or modified equipment including implementation of minor instrument and control engineering projects, while ensuring the overall technical integrity of the terminal from the instrument & control (I&C) discipline perspective.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical support and solutions for the Production and Maintenance teams for instrument-related issues
• Liaise closely with Production and Maintenance teams as to how to reduce instrument maintenance costs and increase availability and functionality.
• Liaise with external stakeholder including government agencies on possible gas pipeline network and electrical power grid, instrument and metering interfaces to ensure conformity.
• Prepare and update instrument maintenance procedures for all instruments, PLC, Fire & Gas system, ESD, metering, CCTV and security equipment is up to date
• Conduct root cause analysis for instrument related incident and recommend preventive and corrective actions to prevent future occurrence
• Carry out MOCs project to resolve and improve instrument reliability and operational issues from engineering, construction to commissioning
• Ensure verification, inspection, testing and reporting to management in respect of all electrical and instrument equipment used for maintenance and their certification for use in hazardous areas of the terminal.
• Participate and provide support in execution of maintenance or major equipment turnarounds in the terminal
• Manage functional safety lifecycle of SIS in the Terminal
• Support expansion project from meeting overall facility integrity point of view, ensure smooth integration and any opportunity to leverage with existing Plant is captured
• The incumbent shall also participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum eight (8) years practical experience in an instrument & control maintenance / design function in an oil & gas or petrochemical Plant
• Conversant with local codes, regulations and submission procedures, and must possess expert knowledge of electrical & instrument international engineering design
• Experience in functional safety for the process industry as per IEC 61511. Certified functional safety engineer will be an advantage
• Experience in installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical, instrument and control equipment in the oil, gas or petrochemical industry is required.
• Experience with common PLC programming software and languages and able to troubleshoot third party equipment issues through program debugging. Experience with Siemens PLC will be an advantage

Education

• The candidate must have a good Degree in Electrical & Electronics Engineering or equivalent.
• Candidate with professional accreditation or affiliation to professional bodies of engineers will have an advantage.

Performance Criteria

• Able to carry out day to day activities with minimum supervision.
• Able to perform installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical equipment and related instruments.
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Strong interpersonal, written and verbal communication skills
3. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Job Requirements

• NITEC/Higher NITEC qualification in Precision/Mechanical Engineering or higher.
• At least 2 years working experience in a quality control environment.

Preferred Skills

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.
• Understand CORE Tools.

Candidates with more experience will be considered for a senior role.

1. Assist corporate clients in the establishing, implementation and maintenance of management system in accordance with various international and local standards such as ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 22000:2018, FSSC 22000, bizSAFE certifications,etc.
2. Provide professional advice and guidance to organization seeking consultation services.
3. Plan and execute project in accordance with client’s requirements
4. Able to work independently as will be working from home.
5. Conduct consultation at client premises.
6. Conducting internal audits and preparation of audit report
7. Any other duties as required by the Compan

Job Requirements:

1. Diploma or Degree in food science or food technology or safety and health related.
2. Minimum 1 years of working experiences in QEHS. Preferred those with experienced on QEHS / food safety consultancy and Quality, Environmental, Safety & Health experience.
3. Able to work independently and meet to each project timeline and deadline.
4. Candidate should be self-motivated and hardworking.
5. Candidate should be able to communicate effectively and interact with corporate clients.

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Whether you’re at the start of your career or looking to discover your next adventure, your story begins here. At Citi, you’ll have the opportunity to expand your skills and make a difference at one of the world’s most global banks. We’re fully committed to supporting your growth and development from the start with extensive on-the-job training and exposure to senior leaders, as well as more traditional learning. You’ll also have the chance to give back and make a positive impact where we live and work through volunteerism.

Shape your Career with Citi

We’re currently looking for a high caliber professional to join our team as as Vice President, Wealth - IPB and Private Bank Control Testing Leader - Hybrid (Internal Job Title: Business Risk and Control Officer - C13) based in Singapore. Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future. For instance:

• Citi provides programs and services for your physical and mental well-being including access to telehealth options, health advocates, confidential counseling and more. Coverage varies by country.
• We believe all parents deserve time to adjust to parenthood and bond with the newest members of their families. That’s why in early 2020 we began rolling out our expanded Paid Parental Leave Policy to include Citi employees around the world.
• Citi provides access to an array of learning and development resources to help broaden and deepen your skills and knowledge as your career progresses.
• We offer our employees resources and tools to volunteer in the communities in which they live and work. In 2019, Citi employee volunteers contributed more than 1 million volunteer hours around the world.

The Wealth Products and Operations Control Testing Team is responsible for the testing of controls that are designed and owned by Citi’s Wealth Product and Operations departments.

The Citi Wealth business delivers a comprehensive wealth solution to clients across the wealth continuum, with integrated advice and execution, as well as traditional and alternative investments, managed account strategies, world-class research and investment guidance. The Wealth business serves ultra-high-net-worth individuals and family offices through Citi Private Bank, operates in the affluent and high-net-worth customer relationship tiers of Citigold® and Citigold Private Client and offers wealth management in the workplace through Citi Global Wealth at Work.

This position reports to the Wealth Products and Operations Control Testing Head within the Citi COO organization’s Central Testing Utility; and is an execution-oriented individual contributor position accountable for end-to-end controls monitoring of the Wealth Products and Operations department – i.e., operational controls performance assurance/testing – which includes design, execution, results reporting, and insight sharing related to the above scope of controls monitoring/testing.

The Wealth Products and Operations Control Testing Leader is a subject matter expert on overall controls monitoring, with an excellent level of understanding of control testing and who closely follows latest trends in controls testing and adapts them for application within their own job and covered businesses and functions.

Excellent communication skills required to negotiate internally, often at a senior level. Developed communication and diplomacy skills are required to guide, influence and convince others, particularly colleagues in other areas and occasional external customers. Accountable for significant controls testing results and advice regarding the controls execution. Necessitates a degree of responsibility over technical strategy.

In this role, you’re expected to:

• Supports the Controls Testing Utility by acting on assessing control design, designing control testing tools, developing control testing procedures, ensure control testing transitions, dispositioning exceptions, and developing insights.
• Carries key responsibility for Control Design Assessment (CDA) by executing CDA checklist/procedures for controls and recording results in Citi Risk & Control (CRC).
• Owns significant portions of control testing design activity, which includes writing control testing tool descriptions, and completing control testing and QUEST setup.
• Develops control testing procedures in Confluence and is responsible for obtaining necessary signoffs from covered businesses and functions.
• Performs a uniquely significant role on training Central Execution team overseas on all designed control testing tools and established control testing procedures.
• Has the ultimate decision on controls testing outlier disputes, holds the responsibility to raise concerns through IMPACT Concerns or QUEST Observation Logs based on the Business.
• Creates materials for Operational Risk Forums (ORF) and senior meetings as needed and investigates causes for results that are deviating from trends and escalate situations that pose excessive risk(s).
• Develops and drives quality-checking routines to ensure compliance with all relevant policies, operating guides, and owned control testing.
• Supports team members on topics ranging from control testing design to performance management and control testing platforms basics.
• Helps drive continuous improvements in accuracy, efficiency, timeliness, and quality of MCA control design assessment and controls testing.
• Maintains relationships and drives accountability with partners and stakeholders to drive control testing's success in support of the business's strategy.
• Appropriately assesses risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behavior, conduct and business practices, and escalating, managing and reporting control issues with transparency, as well as effectively supervise the activity of others and create accountability with those who fail to maintain these standards.
• Support other relevant work efforts of the department where needed and as directed by their manager.

As a successful candidate, you’d ideally have the following skills and exposure:

• 5+ years relevant experience, 3+ years in Risk & Controls roles.
• Subject matter expert on controls design, execution and/or control testing.
• Excellent understanding of MCA (Managers Control Assessment) frameworks and processes.
• Advanced skills in MS Word, MS Excel, MS PowerPoint, and MS SharePoint.
• Effective communication, written and presentation skills.
• Strong people and relationship management skills with the ability to influence others and foster a sense of collaboration.
• Independent thinker and able to perform a credible challenge of businesses/functions.
• Ability to work effectively on virtual teams, including across different geographies and time zones preferred.
• Investment securities and/or insurance licenses preferred (e.g., Series 7, 9,10, 24, 63, 53, 55, 66, L&H).
• Bachelor’s/University degree, Master’s degree preferred.

Working at Citi is far more than just a job. A career with us means joining a family of more than 230,000 dedicated people from around the globe. At Citi, you’ll have the opportunity to grow your career, give back to your community and make a real impact.

Take the next step in your career, apply for this role at Citi today

https://jobs.citi.com/dei

Whether you’re at the start of your career or looking to discover your next adventure, your story begins here. At Citi, you’ll have the opportunity to expand your skills and make a difference at one of the world’s most global banks. We’re fully committed to supporting your growth and development from the start with extensive on-the-job training and exposure to senior leaders, as well as more traditional learning. You’ll also have the chance to give back and make a positive impact where we live and work through volunteerism.

Shape your Career with Citi

We’re currently looking for a high caliber professional to join our team as Vice President, Wealth Investments EMEA, LATAM, NAM Control Testing Leader - Hybrid (Internal Job Title: Business Risk and Control Officer - C13) based in, Singapore. Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future.

For instance:

• Citi provides programs and services for your physical and mental well-being including access to telehealth options, health advocates, confidential counseling and more. Coverage varies by country.
• Citi provides access to an array of learning and development resources to help broaden and deepen your skills and knowledge as your career progresses.
• We have a variety of programs that help employees balance their work and life, including generous paid time off packages.
• We offer our employees resources and tools to volunteer in the communities in which they live and work. In 2019, Citi employee volunteers contributed more than 1 million volunteer hours around the world.

The Wealth Products and Operations Control Testing Team is responsible for the testing of controls that are designed and owned by Citi’s Wealth Product and Operations departments.

The Citi Wealth business delivers a comprehensive wealth solution to clients across the wealth continuum, with integrated advice and execution, as well as traditional and alternative investments, managed account strategies, world-class research and investment guidance. The Wealth business serves ultra-high-net-worth individuals and family offices through Citi Private Bank, operates in the affluent and high-net-worth customer relationship tiers of Citigold® and Citigold Private Client and offers wealth management in the workplace through Citi Global Wealth at Work.

This position reports to the Wealth Products and Operations Control Testing Head within the Citi COO organization’s Central Testing Utility; and is an execution-oriented individual contributor position accountable for end-to-end controls monitoring of the Wealth Products and Operations department – i.e., operational controls performance assurance/testing – which includes design, execution, results reporting, and insight sharing related to the above scope of controls monitoring/testing.

The Wealth Products and Operations Control Testing Leader is a subject matter expert on overall controls monitoring, with an excellent level of understanding of control testing and who closely follows latest trends in controls testing and adapts them for application within their own job and covered businesses and functions.

Excellent communication skills required to negotiate internally, often at a senior level. Developed communication and diplomacy skills are required to guide, influence, and convince others, particularly colleagues in other areas and occasional external customers. Accountable for significant controls testing results and advice regarding the controls execution. Necessitates a degree of responsibility over technical strategy.

In this role, you’re expected to:

• Supports the Controls Testing Utility by acting on assessing control design, designing control testing tools, developing control testing procedures, ensure control testing transitions, dispositioning exceptions, and developing insights.
• Carries key responsibility for Control Design Assessment (CDA) by executing CDA checklist/procedures for controls and recording results in Citi Risk & Control (CRC).
• Owns significant portions of control testing design activity, which includes writing control testing tool descriptions, and completing control testing and QUEST setup.
• Develops control testing procedures in Confluence and is responsible for obtaining necessary signoffs from covered businesses and functions.
• Performs a uniquely significant role on training Central Execution team overseas on all designed control testing tools and established control testing procedures.
• Has the ultimate decision on controls testing outlier disputes, holds the responsibility to raise concerns through IMPACT Concerns or QUEST Observation Logs based on the Business.
• Creates materials for Operational Risk Forums (ORF) and senior meetings as needed and investigates causes for results that are deviating from trends and escalate situations that pose excessive risk(s).
• Develops and drives quality-checking routines to ensure compliance with all relevant policies, operating guides, and owned control testing.
• Supports team members on topics ranging from control testing design to performance management and control testing platforms basics.
• Helps drive continuous improvements in accuracy, efficiency, timeliness, and quality of MCA control design assessment and controls testing.
• Maintains relationships and drives accountability with partners and stakeholders to drive control testing's success in support of the business's strategy.
• Appropriately assesses risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behavior, conduct and business practices, and escalating, managing and reporting control issues with transparency, as well as effectively supervise the activity of others and create accountability with those who fail to maintain these standards.
• Support other relevant work efforts of the department where needed and as directed by their manager.

As a successful candidate, you’d ideally have the following skills and exposure:

• 5+ years relevant experience, 3+ years in Risk & Controls roles.
• Subject matter expert on controls design, execution and/or control testing.
• Excellent understanding of MCA (Managers Control Assessment) frameworks and processes.
• Advanced skills in MS Word, MS Excel, MS PowerPoint, and MS SharePoint.
• Effective communication, written and presentation skills.
• Strong people and relationship management skills with the ability to influence others and foster a sense of collaboration.
• Independent thinker and able to perform a credible challenge of businesses/functions.
• Ability to work effectively on virtual teams, including across different geographies and time zones preferred.
• Investment securities and/or insurance licenses preferred (e.g., Series 7, 9,10, 24, 63, 53, 55, 66, L&H).
• Bachelor’s/University degree, Master’s degree preferred.

Working at Citi is far more than just a job. A career with us means joining a family of more than 230,000 dedicated people from around the globe. At Citi, you’ll have the opportunity to grow your career, give back to your community and make a real impact.

Whether you’re at the start of your career or looking to discover your next adventure, your story begins here. At Citi, you’ll have the opportunity to expand your skills and make a difference at one of the world’s most global banks. We’re fully committed to supporting your growth and development from the start with extensive on-the-job training and exposure to senior leaders, as well as more traditional learning. You’ll also have the chance to give back and make a positive impact where we live and work through volunteerism.

Shape your Career with Citi

We’re currently looking for a high caliber professional to join our team as Vice President, Business Risk and Control Officer)- Hybrid (Internal Job Title: Business Risk and Control Officer- C13) based in, Singapore. Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future. For instance:

• Citi provides programs and services for your physical and mental well-being including access to telehealth options, health advocates, confidential counseling and more. Coverage varies by country.
• Citi provides access to an array of learning and development resources to help broaden and deepen your skills and knowledge as your career progresses.
• We have a variety of programs that help employees balance their work and life, including generous paid time off packages.
• We offer our employees resources and tools to volunteer in the communities in which they live and work. In 2019, Citi employee volunteers contributed more than 1 million volunteer hours around the world.

The Business Risk and Control Officer is a strategic professional who stays abreast of developments within own field and contributes to directional strategy by considering their application in own job and the business. Recognized technical authority for an area within the business. Requires basic commercial awareness. There are typically multiple people within the business that provide the same level of subject matter expertise. Developed communication and diplomacy skills are required in order to guide, influence and convince others, in particular colleagues in other areas and occasional external customers. Significant impact on the area through complex deliverables. Provides advice and counsel related to the technology or operations of the business. Work impacts an entire area, which eventually affects the overall performance and effectiveness of the sub-function/job family

In this role, you’re expected to:

• Help contribute to governance and the facilitation of the execution of the Manager Control Assessment (MCA, i.e. Risk & Control Self-Assessment) as required by the MCA Standard including the assessment and appropriate approval of risk associated with business changes.
• Support teams in the quality, completeness, and accuracy of the implementation of the Control Framework, including Risk Control Policy, Control Standard, Issue Management Policy, Lesson Learned Policy and Control Inventory.
• Assist in performing a detailed analysis on the identification of issue root cause, partnering with control and process owners to recommendations holistic corrective actions and improvements, provide check and challenge to ensure appropriate escalation in according with Issue Management and Escalation Policies.
• Help contribute to the Lessons Learned Policy, including monitoring of control breaches and dissemination and learnings across other business units for process improvement to limit the occurrence of similar future events and where similar risk exposure might exist.
• Support the review and challenge process, within the FLUs, on the effective design and management of controls to mitigate risks as required by the Control Standards, including implementation and operation, conducting the control monitoring, handling deficiencies, and escalating issues for resolution.
• Help contribute to the timeliness, accuracy and completeness of the MCA through controls prior to the execution of a process (QC).
• Assist in the monitoring of the adherence to the MCA Standard through controls after the execution of a process (QA).
• Support in dealing with Operational and Compliance Risk in accordance with established Policy requirements.
• Assist in performing a detailed analysis to identify, assess, escalate, and manage risk exposures across Risk Categories (Operational Compliance, Strategic, Reputational, etc), including material, emerging and concentration risks in accordance with enterprise Policies and the establishment of Key Indicators to monitor risk exposures.
• Assist in supporting Risk Appetite and monitor / assess exposures against this in accordance with enterprise requirements (if applicable).
• Be part of the process to identify, assess, record and response to Operational and Compliance Risk events, ensuring these are captured accurately, timely and in accordance with requirements.
• Help ensure that adequate governance and training are in place to support management of Risk profiles.
• Contribute to the risks associated with New Activities and changes to the Business, ensuring these are well understood and adequately controlled (if applicable).
• Support operational risk scenario analysis and stress testing for Operational Risk Capital requirements.
• Support with risk and control assessments or coordination for programs within various risk stripes and ensure sufficient subject matter expertise exists to enable management of these risks within the Business (e.g. third party, fraud, sanctions etc) (if applicable).
• Coordinate risk and control responsibilities and ensure accountabilities are embedded within FLUs, including providing training and leading by example.
• Support with standards and procedures that conform to enterprise requirements and support sound operational and compliance risk management.
• Apply knowledge of the business, products or services to identify and implement control points and processes throughout the business.
• Appropriately assess risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behaviour, conduct and business practices, and escalating, managing and reporting control issues with transparency.

As a successful candidate, you’d ideally have the following skills and exposure:

• 6-10 years of experience. , 3+ years in Risk & Controls roles preferred.
• MS Excel, MS Access, SAS, SQL, Visual Basic a plus. 5+ years’ experience in financial services.
• Consistently demonstrates clear and concise written and verbal communication skills
• Effective organizational influencing skills required.
• Third party vendor management preferred. Demonstrated ability to lead global team efforts
• Excellent problem-solving skills Ability to comprehend the big pictures with high attention to critical details
• Demonstrated ability to develop and implement strategy and process improvement initiatives.
• Bachelor's/University degree, Master's degree preferred.

Working at Citi is far more than just a job. A career with us means joining a family of more than 230,000 dedicated people from around the globe. At Citi, you’ll have the opportunity to grow your career, give back to your community and make a real impact.

Take the next step in your career, apply for this role at Citi today

https://jobs.citi.com/dei

Quality Lab Support Coordinator

6 months contract

About the Company:
Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Receive, archive, retrieve and dispose retention sample, following standard work, approved procedures and regulatory requirements in timely manner.
• Maintain proper 5S and ensure inspection readiness of retention sample rooms.
• Perform assigned tasks within stipulated timeline and escalate discrepancies to Reporting Manager.
• Support laboratory supplies stock check, receiving, stock arrangement and disposal as necessary.
• Any other duties as assigned by reporting manager.

Requirements:

• GCE O Level qualification and above
• Proficient with computer software such as Microsoft Word & Excel
• The role will require the person to be able to move heavy boxes up to 15 KG during process like transfer of samples/stocks checking.
• Customer focus with strong business acumen and continuous improvement mindset.
• Critical thinking mindset with a collaborative and problem-solving attitude.
• Good communication and interpersonal skills.
• Ability to work effectively in a team-based environment.

Reg No: R22104540

EA License no: 94C3609

Job Description:

• Drive PGCS Quality programs and policies compliance across site, by partnership with functional stakeholders.
• Key contributor/promoter to the advancement of Quality function across the sites; creating and driving critical/key business objectives in line with supporting/partnering with Operations, Supply Chain functions etc.
• Lead incident management and resolution and champion customer quality across Singapore. Site lead for Quality and Food safety crisis mgmt.
• Lead the implementation of the Singapore Quality Strategy including communication, project management and roll out activities.
• Lead continuous improvement culture/productivity initiatives to support site BPI process, demonstrating best practices to implement all quality improvements
• Drive, support and champion KPIs, key Quality metrics, etc.
• Act as a business partner to other functions whilst championing Quality, to ensure an extended and consistent quality focus.
• Be a key member of the Site Leadership team and value add in driving functional and site agenda.
• Support and provide strategic guidance around NPIs, validation, Total Quality System, Compliance, Capital investment, etc.
• Partnership with other functions ensuring change control risk assessment and validation in place for Network capacity projects and other key projects and significant changes.
• Financial Management; Budgetary and AOP responsibilities/input.
• Compliance; drive partnership with other functions through the Quality team to achieve key business goals for the control environment. Compliance with all regulations and 3rd party auditing requirements.
• Provide strategic quality leadership to the extended Quality Team
• Organisation design & sustainability of a highly effective team with appropriate succession plan. Encourage, manage & promote people-related activities/processes, partnering with HR
• Develop capability, personal growth and career development for direct reports, support these activities with DRs’ associated teams.
• Play in instrumental role in developing the overall team capability, supporting and aligning with overall plant culture.
• Ensure the smooth transition of new products to the Singapore facilities.
• Manage the complexity of additional materials, packaging and concentrate components from a quality perspective as portfolio expands
• Support and implement PGCSSC global quality initiatives
• Systems improvements (including IT systems) in terms of Processing, GMP, Product Safety, Disposition and Traceability.
• A requirement of the role is that you must adhere to all PepsiCo Health & Safety requirements.

Qualifications :

• Bachelor’s Degree in Science, Food Technology, Chemistry or any other related discipline
• Minimum 7 years of relevant experience as a supervisor in operating Laboratory environment, manufacturing concern/MNC
• Ability to manage senior stakeholders and leadership team members
• Experience in People Management and prior supervisory skill
• Possess knowledge of and experience in GLP, HPLC / GC operation, SAP QM module and LIMS management
• Strong leadership presence, ability to manage and co-ordinate with cross-functional teams on investigation analysis, troubleshooting and issues resolution
• Knowledge of food safety quality standards such as HACCP and FSSC 22000
• Ability to lead change and drive behaviours
• Ability to organize and manage multiple priorities in high-pressure work environment
• Strong collaboration and influencing skills
• Excellent communication and interpersonal skills, both verbal and written with ability to clearly articulate ideas and proposals to all levels of the organization
• Positive and Can-do Attitude
• Willing to stretch and take additional responsibilities when needed
• Lead by example to others

Kindly note that this is a short-term role based in Singapore.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Sobono Group Profile

Sobono Group is a leading energy solutions provider in the Asia Pacific region, committed to sustainability and innovation. We are developing the RExus Waste Wood to Energy (WWtE) Plant and, in parallel, other renewable energy plants regionally.

Job Position – Electrical & Instrumentation Control (E&IC) Engineer

The Electrical Engineer will play a critical and challenging role in the design, engineering, and construction of the electrical systems for the RExus WWtE Plant. This position will be responsible for overseeing all electrical engineering aspects of the project, ensuring compliance with industry standards and project specifications.

Key Responsibilities:

· Develop, execute, and manage capex projects according to company guidelines, meeting operational, technical, commercial, and HSEQ standards.

· Develop and review electrical design drawings, schematics, and specifications.

· Coordinate with other engineering disciplines (mechanical, civil, instrumentation, and control) to ensure seamless integration of electrical systems.

• Prepare detailed electrical equipment and system specifications.

· Interpret and implement project technical specifications, attend meetings for technical clarifications, and facilitate identifying and mitigating engineering risks.

· Review and approve vendor documentation, including equipment data sheets and technical specifications.

• Oversee the procurement and installation of electrical equipment.
• Perform site inspections and commissioning activities.
• Ensure compliance with relevant electrical codes, standards, and regulations.
• Troubleshoot electrical issues and implement corrective actions.
• Prepare technical reports and documentation.
• Coordinate with the project team to ensure timely completion of electrical work.

Qualifications:

• Bachelor's degree in Electrical Engineering or related field.
• Minimum of 3 years of experience in electrical engineering, preferably in the power plant or industrial sector.
• Strong knowledge of electrical design principles, standards, and regulations.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, ETAP).
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.

Preferred Qualifications:

• Knowledge of power plant control systems and automation.
• Experience in project management.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a Specialist you will be responsible for support and administration (system back-up, user access administration) for LIMS, MODA and other related Laboratory computerized systems. This role also requires to process the LIMS and MODA static data requests

Responsibilities

• Support and administration (system back-up, user access administration) for Sample Manager LIMS, MODA LIMS, iLAB, and other related Laboratory computerized systems
• Maintenance of LIMS static data (Sample Manager LIMS, MODA LIMS and STATISTICA systems)
• Support for installation and qualification/ validation of software related aspects of computerized instrumentation
• Actively contributes to operational efficiency/continuous improvement initiatives.
• Support system audit trail review all related Laboratory computerized systems
• Maintenance of software related changes to computerized instruments
• Server and database maintenance and administration as relates to laboratory systems
• Provide training for the roll-out of new computerized systems.
• Generation and execution of computer validation documentation (protocols and reports)
• Can identify computer related issues; troubleshoot, identify and complete or coordinate deviation, change control and/ or corrective action records.
• System/ equipment manufacturer and or vendor interaction as required in order to trouble shoot system issues.
• Available to troubleshoot and resolve critical system issues as they occur.
• Experience manages projects (people/ team environment) to meet the timelines.
• Customer and regulatory agency interaction as required.
• Oversight of computer system policies and procedure in order to ensure policy is aligned with current regulatory expectations.
• Familiarity with 21 CFR Part 11 and EU Annex 11 requirements, data integrity requirements and expectations as well as common industry practice with respect to laboratory computerized system management and administration.
• SME in 1 or more areas as aligned with training plan.

Experience

• Degree/Diploma in relevant Science field or Equivalent
• Minimum 5 years of experience
• Relevant work experience preferably Lab related IT experience in a biotech or medically related field.
• Experience in lab computer systems essential (prefer experience with LIMS, and CDS –Chromatography Data Systems

​

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

R63209

Job Responsibilities

1. System Design and Development

• Design motion control systems, including hardware and software components.
• Develop and test control algorithms for precision motion systems.
• Create detailed design specifications and documentation.

2. Component Selection and Integration

• Select appropriate sensors, actuators, motors, and controllers for the motion control system.
• Integrate components to ensure seamless operation and optimal performance.
• Work with suppliers and vendors to source high-quality components.

3. Simulation and Testing

• Conduct simulations to predict system behavior and validate design choices.
• Develop and implement testing protocols to evaluate system performance.
• Troubleshoot and resolve issues identified during testing.

4. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers.
• Communicate design concepts and progress to stakeholders.
• Collaborate with manufacturing teams to ensure designs are feasible and cost-effective.

5. Optimization and Improvement

• Continuously improve motion control systems for better efficiency, accuracy, and reliability.
• Stay updated with the latest advancements in motion control technology.
• Implement feedback from field tests and customer use to refine system designs.

6. Project Management

• Manage project timelines, budgets, and resources.
• Ensure projects meet deadlines and quality standards.
• Coordinate with project managers and other engineers to align with project goals.

Required Skills and Qualifications

1. Technical Skills

• Proficiency in motion control technologies and principles.
• Experience with CAD software for designing mechanical and electrical components.
• Knowledge of programming languages (e.g., C/C++, MATLAB, Python) for developing control algorithms.
• Familiarity with PLCs (Programmable Logic Controllers) and HMI (Human-Machine Interface) systems.

2. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot complex motion control issues.

3. Education and Experience

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Robotics, or a related field.
• Relevant experience in designing and implementing motion control systems.

4. Soft Skills

• Excellent communication and teamwork skills.
• Strong organizational and project management abilities.
• Attention to detail and a commitment to producing high-quality work.

Additional Responsibilities

• Compliance and Safety

• Ensure all designs comply with industry standards and safety regulations.
• Conduct risk assessments and implement safety measures in system designs.

• Innovation and Research

• Engage in research and development to explore new motion control technologies.
• Innovate and propose new solutions to enhance system performance and capabilities.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

·Able to work on PH ,Night shif and Weekend

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753

Quality Inspector (Jurong East)

working hours: 5 days - 8am - 5.30pm + evening/ weekend OT

base salary + OT pay + 1 month AWS + company shuttle bus (no VB)

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

At Citi, we get to connect millions of people across hundreds of cities and countries every day. And we've been doing it for more than 200 years. We do this through our unparalleled global network. We provide a broad range of financial services and products to our clients – whether they be consumers, corporations, governments or institutions – to help them meet their biggest opportunities and face the world's toughest challenges.

Shape your Career with Citi

Citi Private Bank (CPB) is dedicated to serving the world’s wealthiest individuals and their families. From 52 locations across 20 countries, we offer our services to more than 14,000 ultra-high net worth clients from nearly 100 nations. Our clients include entrepreneurs, business leaders, executives, their heirs and families, whom we offer customized services to help protect and responsibly grow their wealth. Our unique approach focuses on fewer, larger and more sophisticated clients with an average net worth above $100 million.

We’re currently looking for a high caliber professional to join our team as Officer, KYC Quality Assurance, Citi Private Bank - Hybrid (Internal Job Title: KYC Operations Intmd Analyst– C11) based in Singapore. Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future. For instance:

• Citi provides programs and services for your physical and mental well-being including access to telehealth options, health advocates, confidential counseling and more. Coverage varies by country.
• We believe all parents deserve time to adjust to parenthood and bond with the newest members of their families. That’s why in early 2020 we began rolling out our expanded Paid Parental Leave Policy to include Citi employees around the world.
• We empower our employees to manage their financial well-being and help them plan for the future.
• Citi provides access to an array of learning and development resources to help broaden and deepen your skills and knowledge as your career progresses.
• We have a variety of programs that help employees balance their work and life, including generous paid time off packages.
• We offer our employees resources and tools to volunteer in the communities in which they live and work. In 2019, Citi employee volunteers contributed more than 1 million volunteer hours around the world.

In this role, you’re expected to:

• Responsible to perform independent Client Onboarding KYC due diligence functions of new and existing clients across a variety of teams including private bankers, operations and compliance.
• To review clients' profiles and work with banker team to fulfill onboarding requirement, full compliance of Bank’s AML/KYC standards, local laws and regulations.
• Perform Client Name Screening disposition, Sanctions review and Enhanced Due Diligence.
• Identify and highlight suspicious money laundering activities, deficiencies and other non-compliance issues to management.
• Establishes and maintains close working relationship with client, stakeholder and within team to facilitate an open and direct communication of issues, needs, queries and system setups, in such that these may be responded to in an efficient, prompt and professional manner.
• Responsible for various types of project management, process and policy changes, new initiatives and managing cross-functional relationships with all teams. Analyzes complex and variable issues with significant departmental impact in the team.

As a successful candidate, you’d ideally have the following skills and exposure:

• 3-6 years of experience in KYC/AML process, compliance, operations, risk & control functions
• Demonstrated interpersonal skills, pro-active team player but also able to work independently, with exceptional written and verbal communication skills
• Ability to manage multiple stakeholders across levels, businesses, and geographies
• Highly motivated, persistent, and able to work in a structured, high volume, time sensitive, high-risk environme
• Consistently demonstrates clear and concise written and verbal communication skills
• Bachelor’s/University degree or equivalent experience

Working at Citi is far more than just a job. A career with us means joining a family of more than 230,000 dedicated people from around the globe. At Citi, you’ll have the opportunity to grow your career, give back to your community and make a real impact.

Take the next step in your career, apply for this role at Citi today

https://jobs.citi.com/dei

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

This is an exciting position who is responsible for QA oversight of Aseptic Processing Program, Environmental Monitoring and Microbial Control Policies for the Cell and Gene Therapy entity. Role will provide oversight and sterility assurance expertise to Operations to assure aseptic processing meets US and international aseptic processing requirements ( FDA Sterile Product Aseptic Processing Guidance and Eudralex, Annex 1,” Sterile Medicinal Drug Products”, ISO 13408 and 21CFR820).

The role will also provide strategic plan and expertise for the development and implementation of the Microbial Control Strategy. Develop, document and manage microbial control strategy for production processes from incoming raw materials through final product release.

Key responsibilities:

• Provide support and expertise to ensure that Cell and Gene Therapy (CGT) and Media preparation operations and support functions for Cleanroom management, Materials Management, Aseptic practices, Environmental monitoring (EM). Sterilisation methods, and Aseptic process simulations (APS) to confidently deliver CT products to patients with the highest quality sterility assurance level.
• Review policies and procedures and related completed media fill/APS documentation, Environmental Monitoring sample plans, cleanroom qualifications, environmental monitoring excursions, deviations and sterility failures.
• Provide Sterility assurance expertise to support APS/EM deviations and investigations, CAPAs and Complaints related to aseptic processing.
• Review of sterile filter validations, integrity testing and procedures.
• Provide expert support and assessment to business partners including production, MSAT, Engineering, QC and QA assuring adequate facilities contamination prevention practices, monitoring tools are provided to production to guarantee the best EM indicator levels.
• Involvement in global harmonization/ efficiency projects; begin to lead aspects of global projects within specific areas.
• Represent site in global forums from sterility assurance perspective. Collaborate with stakeholders of different functions to lead/implement various global/site projects to support sterility assurance.
• Support regulatory and client audits as Aseptic sterility assurance subject matter expert
• Responsible for the generation of key performance indicators, GEMBA walks, regulatory compliance and efficiency targets.
• Communicate quality operations and compliance perspective effectively to senior management.
• Understand and articulate company business strategy. Maintains a broad view of the business recognizes changes and trends in the appropriate area in which the individual operates.

Key requirements:

• Engineering/ Life Science Diploma/Degree or higher from recognized institution with significant years of QA or QC Sterile processing and Microbial experience in similar capacity.
• GMP experience in the biologics industry is required.
• Working knowledge of microbiological and sterility testing, media fills, environmental monitoring , clean room qualification and management, quality control endotoxin testing and microbiological control strategy required.
• Experience with oversight of aseptic processing and the associated international aseptic processing regulations are required.
• Experience in cell culture, cell or gene therapy experience is a plus.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

R63423

Reponsibilities:

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline.
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry.
• Able to interpret drawings and technical documents
• Able to work independently and contribute to the team excellence
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• NDE level 2 inspector is an advantage

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.