Job Title: Quality Inspector
Location: Tuas
Working Hours: Mon to Fri 8.00am-5.00pm
Basic Salary: $2000-$3500

Role Summary:

• Uphold the quality policies that our company has created and oversee the product inspection process to ensure that all products meet industry & customer expectations.

• Provide support on quality inspection on elastomers, engineering plastics & metallic products and ensure all products are inspected thoroughly to meet the company’s and customer’s expectations.

Job Description

• Perform regular and timely quality inspections, including dimensions & hardness as applicable on all incoming materials, engineering plastics, metallic and elastomers products.

• Perform documentation review of incoming materials, engineering plastics, metallic, and elastomers products.

• Reject all products and materials that fail to meet quality expectations and ensure proper part segregation.

• Prepare and support incoming compound test for review & approval.

• Ensure that the requirements of the documented quality system are adhered to, and work produced complies with drawing and specifications.

• Perform production 1st piece inspection for CNC plastics, CNC metallic, and elastomers products as required in a timely manner and complete inspection records.

• Perform in-process inspection for CNC plastics, CNC metallic, and elastomers products as required in a timely manner and complete inspection records.

• Perform final inspection for CNC plastics, CNC metallic, and elastomers products as required in a timely manner and complete inspection reports in M3.

• Perform outgoing inspection for CNC plastics, CNC metallic, and elastomers products as required in a timely manner and complete inspection reports based on customer requirements.

• Perform outgoing inspection for traded products as required in a timely manner and complete inspection reports based on customer requirements.

• Support engineering for first article (FA) inspection of CNC plastics, CNC metallic, and elastomers products, including inspection report creation and submission.

• Support engineering for inspection with regards to day-to-day quality defects troubleshooting.

• Raise internal deviation report (IDR) for daily inspection fallout and follow up with engineering's disposition to close out the actions required in the IDR.

• Verify the content of manufacturing orders against customer requirements (e.g., drawings, BoMs).

• Close out QC final inspection operations in manufacturing orders in the M3 system and report inspection results for accepted and rejected quantities with their respective quality defect reasons.

• Ensure that traceability is maintained throughout, actively follow up on in-house traceability/material traceability matters with relevant personnel, and follow up with upstream traceability if it is not made available.

• Ensure all measuring, monitoring, and testing equipment are in working condition and within the calibration period before usage.

• For Senior Quality Inspector: Coach quality inspectors, work with minimal supervision, and assist the Quality Specialist/Senior Quality Engineer in scheduling daily quality inspections required for delivery.

• For Senior Quality Inspector: Perform inspections on rubber, plastic, metal & bonded seals products.

• Perform other duties and responsibilities as assigned by the Senior Quality Leader/Senior Quality Engineer.

Requirement:

• Min. Nitec in any field or equivalent with a minimum of 2 years of working experience in a QA/QC/manufacturing environment.

• Experience in the Oil & Gas and rubber manufacturing environment is an added advantage.

• Minimum 2 years of relevant experience in dimensional and hardness inspections in the Oil & Gas Industry.

• Ability to read part drawings and usage of measuring equipment are added advantages.

• Computer literacy and competency.

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

System Framework Responsibilities (Regional)

Quality and Safety System Management

· Set and maintain the MC Packaging Quality and Safety system.

· Document and enforce manufacturing standards and expectations (e.g., traceability, sanitization, GMP).

· Generate key reports on meeting required quality standards and overseeing production process efficiency. (Mainly Singapore and Malaysia)

· Prepare documents for internal and external quality audits and maintenance of line control equipment files. (Mainly Singapore and Malaysia)

· Support projects on quality and safety risk assessment and mitigation actions.

Regulatory Compliance and Auditing

· Assess and report compliance together with MC Packaging Quality and Safety system (e.g., audit policies for vendors, external and internal manufacturing sites, and relevant supply chain functions).

· Identify continuous improvement opportunities for performance and efficiency, and implement fit-for-purpose initiatives.

· Lead and support the Issue and Crisis teams for major events involving MCP manufacturing sites and external partners.

Policy and Standards Development

· Develop and maintain compliance standards for the QA organization across Singapore, China, and Malaysia. (4 sites)

· Set standards and expectations for MCP and external manufacturing sites.

Stakeholder Collaboration

· Partner with internal stakeholders & external stakeholders, ensuring continuous control over materials, facilities, and products.

· Chair meetings with QC Heads of Departments (HODs) and hold regular meetings with Factory / Operations / General Managers

· Work closely with the Business Unit Owner related to Quality Assurance of different manufacturing sites.

· Improve staff skills through training programs.

Manufacturing Responsibilities (Singapore Primary, Malaysia Secondary)

Quality Control Operations

· Manage and lead QC operations for Singapore plant, and ad hoc Malaysia (Iskandar)

· Ensure high consistent quality standards and enforce stringent control processes.

· Introduce up-to-date monitoring of factory operations to ensure quality compliance.

Issue Resolution

· Lead investigations for defective quality issues raised by customers, especially key customers.

· Establish root causes and implement effective corrective actions to prevent mistakes.

· Lead the Quality Team, ensuring overall manufacturing quality function and compliance.

Technology and Equipment Upgrades

· Plan upgrades for advanced QC test equipment and reliable software technology.

Experience and Competency

· Experience in the Manufacturing industry, preferred in the metal packaging industry.

· Having experience in Manufacturing Quality Management, GMP knowledge, Analytical Skills, Manufacturing & Control Analysis, Root Cause Analysis

· Strong in Quality Assurance/Quality Control, Problem Solving, Team Player.

· Strong interpersonal, communication, and customer service skills are also essential because document control specialists regularly communicate with internal and external business partners.

· Ability to interact effectively at all personnel levels and with all functional departments to achieve the objective of the quality management system.

· Bachelor’s degree in Quality, Mechanical or Industrial Engineering or equivalent combination of experience and education. Over 10 years of experience in Quality, Process Improvement, Manufacturing, or equivalent.

· Deep understanding of quality systems, and environmental and regulatory parameters.

· Broad business knowledge and integration of Marketing, Operation, and Quality strategies.

· Accountability – Holds self and others accountable for results and how they are achieved. Has an optimistic “can do” approach. Provide focus and drive to overcome obstacles and get the result we want.

· Proven experience in handling Issues and Crises

· Experience in a managerial role – regional

· Proficiency in English – ability to read and write

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Mackay Marine is a global marine electronics service and satellite communications company with more than 460 employees spread across 45 service locations (depots) in seventeen (17) countries, including the Americas, Europe, and Asia. For over fifty (50) years Mackay has sold, installed, and serviced navigation and communication equipment onboard commercial and naval ships. Mackay offers competitive salaries, benefits, and opportunities for growth based on merit.

Mackay is currently seeking an experienced and local Inventory Control Clerk, to join our Singapore location.

INVENTORY CONTROL CLERK JOB SUMMARY:

The Inventory Control Clerk is responsible for responding to inventory requests, ordering materials for multiple offices, performing depot-to-depot transfers, applying freight costs for billing, and providing pricing for service quotes. As well as maintaining established stock levels, requesting RMAs from vendors for returns, handling warranty claims and/or exchanges, and assisting with cycle counts. The Inventory Control Clerk will stage spare parts for service jobs, check parts out to technicians, and confirm that all parts are either returned or posted to a work order.

Responsibilities:

• Always follows Mackay’s policies and procedures.
• Audits shipments and receipts daily. Updates internal logs, and files related paperwork.
• Maintains an adequate supply of shipping materials.
• Processes orders of materials for the service department as well as for sales.
• Respond to RFQ’s from the service department, and via email, fax, telephone, and website as requested.
• Keeps an accurate control of materials used, track freight costs, and applies to customer invoices.
• Requests RMAs from vendors for returns, warranty claims, and/or exchange parts.
• Ensures the accuracy of orders received; validates quantity, verifies part numbers, and serial numbers against shipping documents and company purchase order.
• Label and maintain inventory in accordance with established procedures.
• Daily control of ‘Kits’ checked out to and back in from MSE’s. Record parts used from service kits, restock parts returned, and maintain inventory levels in accordance with department policy.
• Responding to and monitoring email.
• Other tasks as assigned by supervisor.

The ideal candidate will be punctual, reliable, self-motivated, and have the proven ability to work independently in a faced-paced environment.

QUALIFICATIONS:

• Valid Singapore Driver’s License
• 3+ years of inventory and/or stockroom experience.
• Strong proficiency with MS Office applications, especially Excel.
• Excellent verbal and written communication and interpersonal skills.
• The ability to interpret and solve problems and issues, using instructions, diagrams, or schedule forms.
• Lift up to 20-25 kilos.

Mackay Marine, is a Fair and Equal Employment Employer who recruits employees based on merit criteria (skills and experience), regardless of age, race, gender, religion, marital status or disability; by providing to all employees fair growth opportunities, as well as training based on their needs and rewards based on their performance and contribution.

Responsibilities & Job Descriptions

• Developing and managing project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Manage and deal with site technical & design issues, communicate & liaise with Clients, Architects, Consultants, Developers & key stakeholders of project from beginning to till final completion of project.
• Managing procurement processes, including Tendering, bid evaluations, contract negotiations and vendor selection.
• Conducting regular site inspections to assess project progress and cost control.
• Manage and coordinate all aspects of assigned projects from start to finish, ensuring that projects are smooth in operation and completing on time, within budget, good quality and to the satisfaction of clients.
• Develop and maintain project documentation, including project plans, progress reports, and other project-related documentation.
• Attend all required site project meetings with consultants and clients, including necessary follow-ups and ensuring that project goals and objectives are met for all the projects in the company.
• Setting up site meeting with subcontractors, internal team members, and project related vendors to ensure effective progress of project.
• valuation of Monthly Progressive Claim to Client & reconcile.
• Verify and approve periodical assessment of progress claims of sub-contractors/suppliers with the Project QS/Purchaser till the settlement of final account.

Qualification

• Bachelor’s degree in any Civil / Construction Engineering discipline or equivalent
• At least 10 years overall work experience is required.
• At least 7 years relevant project control management work experience is required for this position.

Requirements

• Excellent experience in managing of Construction projects in Oil & Gas industry (especially in Jurong Island) is strongly required.
• Proficiency with project management software and tools (i.e. Primavera, MS Project, Autocad, etc).
• Able to work in project sites and travel for meeting in different venues as required.
• Understand the Drawings and able to take-off quantities and create the budget and monitor the cost throughout the project.
• Liaise with Government Authorities for getting the approvals for proceeding the site activities.
• Other ad-hoc duties required to carry out.
• Able to work for Extended hours.
• Perform to work on Weekends and Public Holidays.
• Class 3 Licence is required.

Quality Support, Specialist

(12 month contract)

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Primary Responsibilities:

The role will ensure and maintain high standards of quality and compliance within client’s organization.

In this role, you will be responsible for all or subset of the key responsibilities below:

• Perform laboratory system lifecycle management, including system qualification/retirement, commissioning/decommissioning, calibration and maintenance, system administration, and periodic reviews, in accordance with approved procedures and standard lead time.
• Raise Computerize Maintenance Management System (CMMS) request form to create/update/delete SAP master data related to laboratory system.
• Raise purchase request and perform orders confirmation and accrual for laboratory system lifecycle management, inventories, maintenance and repairs orders.
• Liaise with vendor to ensure contractor management documentation and assigned vendor tasks are completed within assigned lead time.
• Perform and review of Quality documents such as eshopfloor logs, eVal and etc.
• Assist in conducting laboratory investigations and ensure effective implementation of related actions within the agreed timeframe.
• Provide inputs for the development and revision of Standard Operating Procedures, Work Instructions and other GMP documents.
• Maintain proper laboratory/storage area housekeeping/5S and ensure inspection readiness.
• Execute section and Quality improvement initiatives and other special projects.
• Any other duties as assigned by reporting manager
• Provide skills training to other team members, ensuring they have the necessary knowledge and competencies to perform their duties effectively.
• Conduct troubleshooting of laboratory system lifecycle, identifying and resolving any issues that may impact the business/work efficiency.
• Assume role of Subject-Matter-Expert of laboratory system lifecycle, collaborates closely with other site and above-site functions. This includes actively participating in discussions, sharing expertise, and providing input to ensure alignment and consistency across the organization.
• Support Reporting Manager in planning of routine operations tasks to ensure completion within stipulated timeline.
• Support and respond to audit requirements and findings.
• Perform assessments of compendial updates and implement changes to Standard Operating Procedures, Work Instructions and other GMP documents.

Requirements:

• Diploma or Bachelor’s degree in Science/ Life Science, Pharmaceutical Science or Engineering or any other relevant field
• At least 3 years of relevant working experience in GMP environment with quality control laboratory experience within the pharmaceutical/chemical manufacturing.
• Competency in analytical chemistry tools such as HPLC, root cause analysis methods and tools.

Reg No: R22104540

EA License no: 94C3609

Quality Support, Associate Specialist

(12 month contract)

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Primary Responsibilities:

The role will ensure and maintain high standards of quality and compliance within client’s organization.

In this role, you will be responsible for all or subset of the key responsibilities below:

• Perform laboratory system lifecycle management, including system qualification/retirement, commissioning/decommissioning, calibration and maintenance, system administration, and periodic reviews, in accordance with approved procedures and standard lead time.
• Raise Computerize Maintenance Management System (CMMS) request form to create/update/delete SAP master data related to laboratory system.
• Raise purchase request and perform orders confirmation and accrual for laboratory system lifecycle management, inventories, maintenance and repairs orders.
• Liaise with vendor to ensure contractor management documentation and assigned vendor tasks are completed within assigned lead time.
• Perform and review of Quality documents such as eshopfloor logs, eVal and etc.
• Assist in conducting laboratory investigations and ensure effective implementation of related actions within the agreed timeframe.
• Provide inputs for the development and revision of Standard Operating Procedures, Work Instructions and other GMP documents.
• Maintain proper laboratory/storage area housekeeping/5S and ensure inspection readiness.
• Execute section and Quality improvement initiatives and other special projects.
• Any other duties as assigned by reporting manager
• Provide skills training to other team members, ensuring they have the necessary knowledge and competencies to perform their duties effectively.
• Conduct troubleshooting of laboratory system lifecycle, identifying and resolving any issues that may impact the business/work efficiency.
• Assume role of Subject-Matter-Expert of laboratory system lifecycle, collaborates closely with other site and above-site functions. This includes actively participating in discussions, sharing expertise, and providing input to ensure alignment and consistency across the organization.
• Support Reporting Manager in planning of routine operations tasks to ensure completion within stipulated timeline.
• Support and respond to audit requirements and findings.
• Perform assessments of compendial updates and implement changes to Standard Operating Procedures, Work Instructions and other GMP documents.

Requirements:

• Diploma or Bachelor’s degree in Science/ Life Science, Pharmaceutical Science or Engineering or any other relevant field
• At least 1 year of relevant working experience in GMP environment with quality control laboratory experience within the pharmaceutical/chemical manufacturing.
• Competency in analytical chemistry tools such as HPLC, root cause analysis methods and tools.

Reg No: R22104540

EA License no: 94C3609

About SLB

We are a global technology company, driving energy innovation for a balanced planet. Together, we create amazing technology that unlocks access to energy for the benefit of all.

At SLB, we recognize that our innovation, creativity and success stem from our differences. We actively recruit people with a diverse range of backgrounds and cultivate a culture of inclusion that unlocks the benefits of our diversity. We want to ensure that everyone feels a sense of belonging here and we encourage, enable and empower our people to foster inclusivity, build trust and demonstrate respect for all across the organization.

Global in outlook, local in practice - and with a united shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

In this position, you will be working on Cameron products and services. Cameron is part of the SLB product family and is a leading provider of flow equipment products, systems and services to worldwide oil, gas and process industries.

Mechanical Engineer – Product Design / Flow Control / Choke products

Job Description:

Support the Engineering Manager and SETC Engineer in checking and approving drawings/designs of Surface Product to meet customer’s requirement, Cameron Engineering and API Standards.

Support the manufacturing and refurbishment of the Flow control, Choke products, via the disposition of NCRs and RGRs. The Engineer will also be appointed as the Lead Engineer for project work, assisting the SETC Engineer.

Roles and Responsibilities:

• Responsible in assisting the Engineering Manager and SETC Engineer in troubleshooting field installation problems
• Support the goals and programs established by the management team. Included in the roles and responsibilities of the Engineer are:
• Checking and approving drawings, information and documentation which meets Cameron engineering standards to enable the manufacturing group and other departments to produce and market the Company’s product.
• Attend and initiate Design and Development Planning and Review session to meet customer’s and industry’s need.
• Guide and lead Junior Design Engineers and Designers on Engineering Design Work.
• Carrying out and direct design and development work to meet customers’ and/or the industry’s need.
• Conduct Engineering Training and Lesson Learnt sessions.
• Facilitate and/or conduct Root Cause Analysis session for SQ/PQ related incidents.
• Provide regional engineering support as instructed by Engineering Manager.
• Working and direct work within stated procedures to ensure that design records/control is maintained.
• To be capable of executing or participate in Stackup Test.
• To be capable of customer engagement.
• To be capable of performing design calculations and design analysis.
• To be capable of performing/conducting Value Engineering workshop and projects.
• To be capable of reviewing and disposing Non-Conformance or Aftermarket (RGR) product/equipment.
• Be familiar with Industrial Standards, Company products, design principles, manufacturing techniques

Qualifications and Experience

• Degree in Mechanical Engineering from a recognized university.
• Ability to produce drawings/sketches to illustrate design/idea

*Service Engineers*

Job Description

Responsibilities:

- Provide technical support to resolve technical inquiries from ships/vessels on Nordic Systems.

- Attend on-board service attendances and commissioning services, annual inspection and maintenance for vessels based on troubleshoot of the technical issues and feedback by chief engineer/vessel managers.

- Review service reports, customer technical specifications and provide support to sales team for bidding of spares.

- Troubleshoot issues involving electrical/electronic control systems, PLC products.

-Read and understand manuals, schematics, and P&ID's.

-Lead the preparation and coordination of ITRs based on approved electrical completion procedures.

-Prepare and update status of punch list and ensure all cleared punch items to be acknowledged by the client reps.

-Monitor and manipulate site execution in line with sequence of works.

-Handle technical issues, drawings, reports, procedures and any other relevant documents.

-Develop engineering capabilities and work with sales team on project proposal and bidding.

-Selection of equipment, materials for instrumentation and controls.

-Execution of projects.

-Plan and carry out E&I maintenances

-Manage Subcon and other adhoc activities, lead the team of technicians on site to execute the project.

Job Requirements

- Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.

- Prior experience in the Maritime/Oil & Gas industries and shipyards will be highly advantageous.

- Excellent verbal and written communication.

- Possess excellent interpersonal and communication skills.

- Responsible, Meticulous and able to work under pressure.

- Proficient with Microsoft Office Applications (Outlook, Word, Excel, Power Point, etc).

- Experienced in PLC/SCADA systems.

- Fluency in English (verbal and written) is essential.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Quality Specialist

(12-month contract)

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Primary Responsibilities:

The incumbent will provide quality oversight on manufacturing site operations at the shop floor and co-ordinates with central quality functions as needed. The role will ensure and maintain high standards of quality and compliance within our organization.

In this role, you will be responsible for all or subset of the key responsibilities below:

• Act as a primary quality contact for assigned IPT & provide day-to-day quality support/guidance to IPT operations including quality decisions for manufacturing related events on the shopfloor.
• Represent quality at Integrated Process Team (IPT) tier meetings (example- Tier-2, Tier-4, Micro Tier), liaise with other quality functions for cascades or escalations to & from IPT Tiers.
• Review & assess events reported on the shopfloor, concur justifications to continue the operations or instruct to stop the operations while pending formal initial quality assessment.
• Participate shopfloor GEMBAs to ensure permanent inspection readiness of the site. Support audit & inspection resource room as assigned by the Manager.
• Act as a quality representative for assigned New Product Introduction (NPI) project & provide quality oversight on manufacturing of developmental batches, clinical manufacturing, process/packaging performance qualifications, equipment qualifications, certificate of analysis profile set-up, material creations, equipment & process change controls, and ensure pre-PAI readiness etc.
• Quality review & approval of documents related to development & qualification of process & cleaning, examples include but limited to - protocol & report for cleaning development cleaning validation, process development, process performance qualification, Initial Continued process verification (CPV), campaign length extensions, dirty/clean hold time changes etc.
• Quality oversight on new/revised electronic or paper documents to support routine production operations, examples include but not limited to –Production batch sheets, cleaning batch sheets, re-packaging protocols, Bill of Materials (BOM) memo, Engineering Record (ER) in IPI, Engineering Change Order (ECO) in SAP, Manufacturing Execution System (MES), non-routine Batch Sheet (BS), e-Log for Batch Sheet (BS) redline markups etc.
• Review & Approval of Statistical Process Control (SPC) limit report, Yield reports
• Perform quality review & approval of routine production/facilities related documents including but not limited to – Environment Management System (EMS) review for manufacturing, warehouse and labs, pest control review, preventive & correction maintenance (PM&CM) extension requests.
• Review non-routine/risk release of equipment/utilities/room, batch risk processing requests & support related material control actions.
• Support ad hoc requests for samples, joint inspections of rejected materials/damaged incoming goods, Time-Out-of-Cold-Storage (TOCS) adjustments in SAP, shelf-life extension requests etc.
• Perform any other tasks as assigned by Manager
• Provide quality oversight for the Aseptic Process Simulation (APS) and Aseptic Observer Program (AOP) such as quality monitoring, review and approval of APS protocol and report
• Review and approve performance qualification protocol, equipment & utilities re-qualification protocols or EM re-qualification protocols.
• Review/Approval of Re-packaging protocol for pre-execution
• Review and approve relevant Artwork.

Requirements:

• Diploma or bachelor’s degree in science/ Life Science, Pharmaceutical Science or Engineering or any other relevant field
• Minimum 5 years of applied professional work experience in quality control/assurance in pharmaceutical manufacturing environment.
• Competency in root cause analysis methods and tools.
• Experience in new product introduction or technology transfers.

Reg No: R22104540

EA License no: 94C3609

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

PURPOSE AND SCOPE

• Responsible for the scheduled & corrective maintenance of instrumentation & control system and equipment

KEY ROLES AND RESPONSIBILITIES

• Performing scheduled maintenance (Preventive/Predictive Maintenance) programs and corrective maintenance (CM) of all the analyzer and instruments in the plant and prepare reports
• Preparation of MSRA for all maintenance works to be carried out
• Calibrating analyzer, instruments, components, CEMS and systems.
• Installing, configuring, calibrating and maintaining control, measurement and indicating instrumentation (pneumatic, analog & digital).
• Installing and terminating pneumatic and fluid connections.
• Inspecting and testing the operation of instruments and systems to diagnose faults
• Removing, repairing, adjusting and replacing components of control valve & actuators, positioner, transmitters and switches
• Maintaining backup and revision documentation for control systems and instrumentation.
• Coordination with 3rd party vendors for maintenance work and spare parts ordering
• Raising and closing permits in CMMS/ SAP system for maintenance work
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

QUALIFICATIONS & EXPERIENCE

• Diploma in Instrumentation or equivalent Engineering discipline
• Minimum 10 years of experience in controls and instrumentation
• Knowledgeable and experience in PLC and DCS systems
• Experience working in the Incineration plant / process Power plant industry is an advantage

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Job Description

• Managing IQC, IPQC, OQC, Quality Team and Laboratory Team
• Establish and report Process & Quality KPIs necessary to ensure performance.
• Contribute to defining and implementing the standards & tools for a comprehensive Quality Management program pertaining to Production.
• Contribute to defining and implementing the standards & tools for a comprehensive Quality Management program pertaining to Production.
• Implement and maintain Integrated Management System to meet the government regulations and company policy.
• Oversee and manage the quality complaint & feedback process for customers and ensure the flagged issues are resolved efficiently with effective communication and coordination with internal /external parties.
• Support business unit to seek for the continuous quality improvement opportunities through information / best practice sharing and training.
• Lead Analytical Laboratory and Quality Technicians in products analysis and testing to support the productions overall aspect and provide stable results of products Quality.
• Implementing, maintaining and continuous review the quality control and assurance systems of the plant, ensure compliance.
• Implementing and maintaining Company’s Integrated Management Systems, Manual and Procedures (ISO9001, ISO14001 & ISO45001，IATF16949), ensure the compliance and effectiveness of the IMS System;
• Assume any other suitable duties as and when assigned by the Company

Job Requirement

• Matured, meticulous, able to work independently with minimal supervision.
• Initiatives & positive working attitude.
• Quality system knowledge
• SAP
• Lean and Sigma knowledge
• Statistical tools & Data Analysis
• Problem Solving skills

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Details:

• Location: Near Pioneer MRT
• Monday to Saturday 5.5 days work per week
• Monday to Friday 8am to 5pm and Saturday 8am to 12.15pm
• Oil and gas / Precision Engineering - Manufacturing

Job Description:

• Reject or return raw materials, component parts which failed to meet specifications or not properly labelled
• Red flag procedural non-compliance and quality issue to higher management
• Update and maintain records of quality check conducted
• Ensure Receiving, First Article, In-process and Final outgoing inspection conformed to quality aspect of engineering drawings
• Parts quality inspection must meet production schedules and time lines for delivery
• Measure product dimensions and ensure all quality aspects of the job met specifications as in engineering drawings
• Generates quality inspection reports per customer requirement
• Ensure parts identifications are properly labelled upon received, during production and completeness for delivery
• Maintain active calibration validity and integrity of all inspection equipment and gages

Job Requirements:

• GCE “N” or “O” level / NTC 2 or NTC 3 in Metal Work
• Minimum 1-year experience in quality control field
• Ability to use common measuring instruments like gauges, calipers, micrometers and profilometers
• Able to interpret technical drawings and engineering specification
• Good communication skill, basic computing skill and a team worker

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

·Able to work on PH ,Night shif and Weekend

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753

• Qualification shall be Diploma in Civil and structural or ITI.
• Min. 10 years working experience for Steel Structural and 7 Years experience for Tekla (Ssteel)
• Software skills , must be proficient with AutoCAD ,Tekla (Xsteel), PDMS
• Strong Knowledge of Steelwork detailing works (welded/bolted).
• Preparation of Steel Structural engineering drawings for Structural Discipline by AutoCAD.
• Engineering drawings includes Steelwork General Arrangement, Connection Details and welding map drawing.
• Modeling the steelwork in 3D using the Tekla Software.
• Preparation of General Arrangement Drawings for the steel works which to be used in Fabrication Yard and Site.
• Preparation of Assembly drawings from Tekla for the steel works which to be used in Fabrication Yard.
• Preparation of Single Part drawings from Tekla for the steel works which to be used in Fabrication Yard.
• Preparation of Cutting List for the structural Bar Items.
• Preparation of Nesting Plan for the structural plate Items.
• Liaise with the Engineering Team for the input drawings.
• Co-ordinate with the fabricator and Shop drawing vendor.
• Review the shop drawing received from the sub-Vendor/
• Handling the technical queries from the fabrication Shop and Site if any.
• Review of Vendor Documents of various Static Equipment, Dynamic Equipment, Tank, Pump, Switch gear, control panels, HVAC Equipment, VFD and Process Packages, Boiler/Heater/Incinerator etc..
• Understand the Inter discipline (Piping, Mechanical, Electrical, Instrumentation, HVAC, F&G) co-ordination required for the project and performs the same within the targeted schedule.
• Programme on BASICS OF METAL CUTTING
• Advanced CAD/CAM

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Lead all aspects of electrical controls, power and instrumentation systems related to the equipment and machinery.
• Be responsible for the design and technical support of all hardware, software, instrumentation and controls elements as part of an integrated system.
• Identify, create and support project documentation including, but not limited to HMI, PLC programing, power distribution, control/signal wiring, wireless technology, cabinet/panel design, BOM and layout drawings to corporate standards.
• Develop instrumentation specifications as related to process requirements and control schemes.
• Support engineering, project management and deployment groups to identify and resolve technical issues.
• Provide technical direction as required.
• Work with outside vendors and purchasing to select and establish equipment component specifications, material take-offs, requisitions and vendor orders while coordinating cost control, project schedule and manufacturing efforts.
• Have the ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Must be able to work through problems from a technical and practical prospective, while maintaining cost controls.
• Have good organization and communication skills.
• Have the ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Must be able to work through problems from a technical and practical prospective, while maintaining cost controls. Ø Prepare, check, and issue instrument schedule and list, including document index, instrument index, I/O list, cable schedule, interconnection wiring drawings, termination drawings, junction box schedule, instrument hookup drawings, and material take off.
• Check and issue block diagrams, control/rack room layout, cable route, instrument location plan, DCS, SIS, BMS systems loop drawings, instrument hook-up details, and instrument sizing and calculation.
• Prepare and issue instrument data sheets for control valves, on-off valves, PCVs, MOVs, PSVs, and other field instruments. Ø Guide designers to prepare drawings.
• Coordinate requirements with other disciplines.
• Work with Project Managers and other team members

Skills & Experiences required:

• Bachelor’s degree in engineering or related field with 10+ years of experience in system controls, instrumentation and wiring.
• Wastewater, Chemical Processing and/or Oil & Gas systems experience is preferred.
• Experience designing PLC & control panels, PLC and HMI programming is preferred.

Must possess in depth knowledge of Automation programmable controller hardware, automation software and AC Drives

Knowledge of Microsoft Office and AutoCad

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

You may also email us your resume to [email protected].

Will be assisting Material Engineer on all activities. Should have Basic Knowledge of Metals & Non-Metals, Alloys, Able to differentiate / grade / mechanical products with atleast Five yearsof Experience

Job Description

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions

Qualification

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.
• Overall work experience of 1 to 3 years in a similar position.
• Basic knowledge & interpretation of gas chromatography, knowledge of densimeter and refractive index equipment preferred.
• Basic knowledge of chemistry.
• Basic Sensory evaluation capability / potential capability preferred.
• SAP knowledge will be an advantage