Job Description:

• Assist in implementing, updating, and maintaining certified quality management systems (ISO 22000, HACCP, Halal and MSC certification) in coordination with third-party certification bodies.
• Conduct quality control checks for incoming raw materials, in-process products, and finished goods to ensure compliance with internal and external standards.
• Support production operations by troubleshooting quality issues and ensuring products meet required specifications before, during, and after production.
• Coordinate QC sample shipments and testing with external laboratories, ensuring timely and accurate testing processes.
• Serve as the QC document controller, ensuring proper coordination and alignment with QA document control systems.
• Liaise with government agencies and certification bodies regarding product registrations and certifications.
• Monitor and implement corrective actions based on inspection findings, working with suppliers and internal teams to resolve issues effectively.
• Conduct periodic food safety and hygiene inspections, providing training where needed to ensure compliance with regulatory and internal standards.
• Assist with procurement operations for consumables, including maintaining approved supplier lists, tracking pricing, and managing delivery timelines.

Requirement:

• WSQ Certification in Food Hygiene and Halal Certification is a must.
• Minimum of 10 years of QA/QC experience, preferably in the frozen food manufacturing sector.
• In-depth knowledge of food safety regulations and quality control standards (HACCP, GMP, ISO standards).
• Familiarity with sensory evaluation techniques and microbiological testing.
• Physically fit to work and experience in cold room environments.
• Strong sense of responsibility, punctuality, and a positive working attitude. Able to thrive in a fast-paced environment with minimal supervision.
• Effective communication in both English and Mandarin to collaborate effectively with Mandarin/English-speaking cross-functional teams and external stakeholders.
• Flexibility to perform overtime (OT) when required, especially during last-minute requests to meet operational needs.

Job Highlights

• Job Types: Contract, Permanent
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, Sat 7.45 am to 11.45 am, alternate Sat
• Great learning development opportunities.
• Work-Life Balance and positive/friendly working environment.

(Only shortlisted candidates will be notified)

As a Quality Engineer, you will be responsible for ensuring the quality of our products and procedures in compliance with established standards, address quality issues, drive continuous improvement, and contribute to building high-quality products that exceed customer expectations.

Job Responsibilities

• Conduct assessment and review on supplier qualification, performance and process capability.
• Ensure supplier quality issues are dealt with, analyzed, improved and follow through.
• Interact with customer on product quality. Handle and follow-up to address customer feedback/complaints.
• Support internal, external and customer audits.
• Evaluation, verification and validation of new parts/samples.
• Establish and maintain inspection criteria for incoming, in-process and final products.
• Identify quality issues, NCR, CAPA handling and drive continuous improvement.
• Authorize the release of products (COC), COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control

Job requirements

• Bachelor's degree in relevant field with 3-5 years experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools
• Strong analytical and problem-solving capability

1) Have Quality Assurance & Quality Control knowledge.

2) know how to use CMM

3) Know and prepare of quality dicumentation and mainteance documents like daily monitoring Data and monthly Data performance.

4) Will prepare documentation for customer audit & ISO Audit

5) Have responsilbility for the job

Job Info:

• Salary: Basic up to $5200 + AWS + VB
• Working Hours: Monday - Friday (9am - 6pm), Alt Saturday (9am - 1pm)
• Location: Boon Lay

Job Scope:

• Provide support to functional departments in ensuring food quality and safety during daily operations
• Plan, organize, and coordinate to ensure the QA Department runs efficiently on a daily basis
• Align with the company’s business objectives and collaborate with department leads to adjust responsibilities in line with GM’s strategic plans
• Prepare monthly reports, such as Complaint Log, HACCP Objectives Summary, Demerit Point System Records, and GMP audits, for submission to management
• Gather and analyze data for trend analysis on non-conformities and improvement initiatives
• Plan lab testing based on FG sensitivity levels to manage department expenses and stay within budget
• Participate in and support quality system implementations, including audits by government agencies, certification bodies, and customers
• Collaborate with all functional departments on process improvements, standards, and procedures documentation
• Lead short-term projects, initiatives, or training programs and ensure timely completion
• Report non-conformance issues related to food quality or safety to the relevant coach
• Perform additional projects as assigned

Requirements:

• Minimum 5 years experience working in the Food industry and possess good knowledge of manufacturing processes
• Proven track record in leading the set-up and implementation of ISO22K or higher standards in the food manufacturing industry will be an added advantage
• Possess knowledge of international standards i.e. FSSC22K, GFSI
• Min. Degree/Diploma in Food related discipline, Food Science or Food Technology

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Quality Inspector (Jurong East)

base salary + OT pay + 1 month AWS + company shuttle bus

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

Job Summary:

• Basic: $3000-$4000 (based on exp)
• Working timing: 5.25 days (Alt Sat), 8.45 am-5.45pm
• Meal provided
• Performance Bonus
• Location: Bishan

Job Description:

• Monitor payments, follow up with defaulting hirers, and handle vehicle repossession and disposal.
• Coordinate with lawyers for legal actions and manage tender auctions.
• Address customer inquiries on repossessed vehicles.
• Oversee recovery of shortfalls after vehicle sales.

Job Requirements:

• Min 2 years of credit control experience.
• Open to candidates who are interested in the automotive industry.

Interested Applicants, kindly send your updated CV to +65 8500 3939 or click on “APPLY NOW”.

We regret that only shortlisted candidates will be notified

EA Personnel Name: Chin Jia Hui, Janice
EA Personnel No: R22107485
EA License No: 15C7752

Your Job

The primary purpose of your role is to work closely with the Product Development team to develop and maintain a Quality Plan. This plan is crucial in managing and mitigating project risks to ensure a flawless product launch that meets the customer's cost, quality, and delivery requirements.

Our Team

You will be reporting to the AQP Manager.
Internal: Product Design Engineers, Manufacturing / Process / Tooling Engineers, Project Management, Manufacturing Plants, Product Management & Sales / Marketing

External: Customers, Suppliers

What You Will Do

• Quality Plan Development: Ensures the project Quality Plan for new products and product modifications are focused on the voice of customer and all project quality deliverables are completed in a timely manner.
• Risk Analysis: Facilitation during front-end product / tool / assembly design or process reviews, design & process FMEA reviews by providing inputs on internal and external quality history, lessons learned and through active critical thinking / questioning. Reviews and approved reliability test plan.
• Metrology / Qualification of New / Modified Parts: Facilitate the development of measurement plans / methods and lead the disposition of new products at FOT (First Off Tool) and Qualification. Ownership of gauges & necessary inspection fixtures, perform Measurement System Analysis, Capability Studies & any necessary statistical analysis with goal of Tool / Process Qualification.
• Flawless Launch: Work with Manufacturing AQP or QE to conduct Safe Launch exercise. Perform process audits and reverse (go & see) FMEA’s to qualify new production processes, and to ensure compliance to documented control plans for new products.
• Customer Approval: Ensures customer required documentation relating to customer acceptance of new products and product modifications are completed.
• Supplier Approval: Reviews and approves supplier product specific documentation on new and modified purchased components. Works with supplier quality engineer to ensure compliance.
• Problem Solver: Lead in the problem solving (8D’s), analysis, and resolution of new product related customer complaints or internal quality complaints during launch. Support efforts for prevention of repeat issues & systemic improvements to the Product Development Processes to reduce New Products QNs.
• Principle Based Management & Quality Systems: Understand & practice the KOCH 5 dimensions & guiding principles, Lean / Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Perform other related duties as assigned by management.

Who You Are (Basic Qualifications)

• BS Degree in Engineering or other related field
• Experience in Quality Engineering or Automotive related field
• Strong organizational skill to anticipate, plan, organize and self-monitor workload
• Good communication skill and presentation skill
• Good interpersonal skills for effective leadership and team facilitation
• Solid Knowledge & understanding of metrology and GD&T
• Knowledge of statistics - experience using Minitab or other software
• Experience in using MS Office (Excel, Word, Power Point)
• Able to travel (domestic and international) 20%

What Will Put You Ahead

• Training in Capability Analysis (CPK) , SPC, AIAG VDA FMEA, Lean / Six Sigma, reliability test plans , VDA19 , VDA5
• Experience in Quality engineering in a new-product introduction environment
• Experience performing PFMEA/DFMEA and using other Advanced Quality Planning tool
• Experience working as customer interface (including Automotive OEMs and Tier1/2 suppliers)
• Working knowledge of testing, molding, stamping, plating and assembly processes
• Good knowledge of IATF 16949, VDA 6.3, AIAG core tools (APQP, PPAP, FMEA, MSA, SPC)
• Quality System (ISO 9001 or IATF 16949) and Supplier Auditing experience, Gage and Fixture design
• Knowledge of VDA 5, VDA19 , AIAG-VDA FMEA
• Experience working with European automotive customers

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

1. Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
2. Preparation of reagents/diluents/ dissolution media as per STP.
3. Perform a various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
4. Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
5. Ensure implementation of SOP for all corresponding activities.
6. Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
7. Ensure real time documentation, maintain data integrity and appropriate traceability.
8. Assist in maintenance and calibration of test instruments per specifications.
9. Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
10. Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
11. Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
12. Responsible for QC lab and equipment/instrument cleanliness.
13. Responsible for procuring and receipt of QC lab glassware and consumables.
14. Any other activities as and when assigned by the Superior.

KEY DUTIES AND RESPONSIBILITES:

• Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
• Preparation of reagents/diluents/ dissolution media as per STP.
• Perform various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
• Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
• Ensure implementation of SOP for all corresponding activities.
• Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
• Ensure real time documentation, maintain data integrity and appropriate traceability.
• Assist in maintenance and calibration of test instruments per specifications.
• Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
• Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
• Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
• Responsible for QC lab and equipment/instrument cleanliness.
• Responsible for procuring and receipt of QC lab glassware and consumables.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Possess working knowledge of GMP in the pharmaceutical industry.
• A good team player with a positive learning attitude.
• Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• EDUCATION & EXPERIENCE
• Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).
• (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.
• (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

To maintain the operational capability of the incineration plant such as performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery. Performing daily inspection on equipment to look out for anomalies and having good documentation on various records and reports for the maintenance operation. Candidate shall be equipped with the ability to understand system schematics and drawings.

Maintenance

· Ensure the plant day-to-day operation is functional at its optimum level.

· Assist the E&I Engineer and lead a team of skilled worker in the maintenance and expeditious repair of the plant’s equipment.

· Handling distributed control system and instruments in the plant and perform daily inspection on equipment.

· Performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery

· Analyze breakdowns, diagnose faults, and execute the required rectification process.

· Take part in plant overhaul activities.

· Ensure close coordination with various parties for maintenance activities.

· To ensure that equipment maintenance & service procedures and programs are effectively implemented consistent with sound engineering practices.

· Ability to understand system schematics and drawings.

· Assist the engineer in any other duties as required.

Requirements

· Minimum Diploma in Electrical Engineering or equivalent.

· Technical Skills and Knowledge on Instruments and Controls Equipment in Waste To Energy Plant

· Minimum 2 years’ experience in Waste to Energy Plant. Fresh graduates are welcome to apply too.

· Medically fit.

· Proficient with Microsoft Word, Excel and PowerPoint.

· Able to work 5 days a week and if required, including public holidays and weekends.

· Extended working hours might be required if urgent work needs to be done to machinery or plant.

· Shift work is not required.

· Team player that is proactive and able to work under pressure.

· Maintaining a positive outlook in the event of adverse condition.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

About Us:

JSTT Singapore Pte Ltd is a leading producer of high-quality sushi and sashimi, providing fresh and delicious products to supermarket counters across [specific regions]. Committed to excellence, we are seeking a skilled and dedicated professional to join our team as a Food Safety and Quality Assurance Officer.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 and FSSC regulations in our central kitchen and 20 supermarket counters. Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000 and FSSC standards.
• Conduct regular audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and recalls.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000 / FSSC standards.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

• Liaise and interface with customers to understand and implement their requirements.
• To monitor for the following:

1. IQC, IPQC & OQC processes to conform to quality requirements.
2. Daily IQC, FQC output to meet production output & delivery demand.
3. Disposition of non-conforming products.

• Perform daily, weekly & monthly QA reports.
• Analyze and trouble-shooting production quality issues.
• Handle customers’ complaint (CAR) with effective corrective actions and close 8D on time.
• Provide training to QC inspectors.
• Perform QC inspectors’ job assignment.
• Conduct regular line audit and drive for quality improvement.
• Conduct internal ISO audit and manage external customer audit.

• Perform QC inspection in accordance to product specification as per customer and company's standard.
• Perform checks on all incoming goods or returns from customers, and complete necessary records.
• Coordinate with Inventory Team to arrange the goods are being stored at the correct chillers.
• Perform quality checks during picking and packing process, as well as before delivery to customers.
• From time to time, inspect the goods in the chiller.
• Highlight any non-conformity to the Supervisors for investigation and corrective action.
• Support the ISO 22000 documentation.
• Any ad-hock job as assign by Manager.

Requirement/Skills:

1. Prior QC experience is value added.

2. Training will be produced.

3. Vegetable and Fruit lovers are welcomed.

4. Able to commit 5.5 days work week

Job Responsibilities:

:

· Implement QA plan, review, and revision for company level.

· Report on quality related matters to the QA/QC Manager and/or immediate superior, including preparation of monthly summary To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support To develop and manage the quality control and quality assurance procedures and ensure compliance.

· To prepare Inspection and Test Plan (ITP) and Inspection Reports Maintain the ISO and related certifications for company level.

· To perform needed tests on site to ensure works are done according to the contract specifications. Preparation of document submissions for client approval.

· Attend meetings and liaise with the client to ensure that quality requirements are being followed at all times.

· Maintain document record master list pertaining to equipment and monitor on the calibration status. Coordinate and make arrangements for equipment calibration when due.

· Compile and receive relevant material certificates and other required certificates and test report from vendors/suppliers. Coordinate with relevant testing laboratories for testing and witnessing.

· Compile and maintain quality records e.g. Request for Inspection (RFI) and verify as necessary. Coordinate on-site quality assurance and control activities.

· To conduct independent Quality Assurance check on and off site.

· Report non-conformities to the QA/QC Manager and/or Project Manager, perform analysis, identify root cause and propose corrective actions.

· Maintain and control QA/QC practices on daily basis with regular checks and inspections ensuring correct operation and implementation of procedures.

· Advise and assist the project team members on QA/QC matters. Assist in the development of internal QA/QC checklists.

· Implement and enforce Quality Control Plan.

· Verification and checks on raw/incoming materials and/or FG. Documents for non-conforming works and corrective action.

· Identify and assess any foreseeable risk arising from workplace or work processes, minimize environmental impact associated with the manufacturing / assembly activities.

· Perform other duties as and when assigned/instructed by immediate superior or higher management.

Job Requirements:

· Minimum Qualification: Diploma in Mechanical/Electrical or Marine Engineering Discipline Minimum 1-2 years of experience in Marine, Oil & Gas Industry

· Good understanding of Marine/Offshore industry practices and standards.

· Know-how in one or more of these areas GD&T, NDT, welding, steel fabrication, material casting, and machining technology will be preferred.

· Familiar with ISO 9001 requirements & different marine classification societies' standards and requirements will be an added good knowledge of QMS and ability to implement, conduct checks and audit and upkeeping of documents etc.

· Project Management Skills

· A team player with good interpersonal and communication skills, attention to details, meticulous and independent. Good organizational, multitasking, prioritization, and effective time management skills.

· Ability to think critically and resolve problems/issues. Positive attitude, proactive and self-initiated.

· Ability to multi-task in a fast paced and dynamic environment

Job Benefits

AWS

Excellent learning environment

Positive and closely knitted working environment

5 days work week

Working Location:

15 Kwong Min Road S(628718)

Shortlisted candidate will be notified

JOB DESCRIPTION

• Support functional departments in terms of processes of food quality and safety during daily operations.

• Plan, organize, and coordinate to ensure the smooth operation of the QA Department daily.

• Understand the business direction of the company and work closely with respective coaches to make necessary adjustments on job scopes and responsibilities to synchronize with the strategic plans of GM.

• Prepare monthly reports i.e. Complaint Log, HACCP Objectives Summary, Demerit Point System Records, GMP audit, etc. for submission to the Management

• Collect and analysis data/trend analysis report on non-conformity and improvement initiatives.

• Plan lab testing by the sensitivity level of FG to manage and control department expenses and to keep within budget.

• Participate and support quality system implementation (audit activities by government sectors, certification bodies, and customers)

• Work closely with all functional departments on improvement initiatives i.e. standards, processes, and procedures in writing

• Assign with short-term projects/initiatives/training programs and responsible for ensuring completion of work before the datelines.

• Report all non-conformity matters with regard to food quality or safety to the coach.

• Other project as assigned

Job Requirements

• Minimum 5 years experience working in the Food industry and possess good knowledge of manufacturing processes.

• Proven track record in leading the set-up and implementation of ISO22K or higher standards in the food manufacturing industry will be an added advantage.

• Possess knowledge of international standards i.e. FSSC22K, GFSI

• Min. Degree/Diploma in Food related discipline, Food Science or Food Technology

• Strong interpersonal and communication skills

• Able to meet tight deadlines and attend to emergencies after work hours

• Bilingual in English and Mandarin to liaise with Mandarin-speaking stakeholders

Job Summary:

• Mon-Fri, 8am to 5pm
• Location: Woodlands
• one year contract , renewable

Responsibilities:

• Maintain and update information in SAP notifications and handle related transactions.
• Coordinate on-site rework activities and inspect materials to ensure quality standards are met.
• Manage notifications and communications with suppliers regarding material issues.
• Inspect materials for defects and issue scrap notices as needed.

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified
We wish you all the best in your career search.

EA License No: 20C0280
EA Personnel No: R24120480
EA Personnel Name: Chua Yun Jie (Clarisse)

Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

Job Description

Be part of a team designing, developing and delivering software products for airport/warehouse/production logistics solution.

Roles and Responsibilities:

· Design and develop various software applications/modules for baggage/material handling solution.

· Develop interface with PLC and other external systems.

· Develop documentation such as function specification, detailed design specification, test plan.

· Perform onsite testing and commissioning.

· Conduct user training and system operation support if required.

Requirements:

· Degree/Diploma in computer science, computer engineering, information technology or related discipline.

· Proficient in programming with Java/Python/C#/Java Script.

· Experience in SQL and Microsoft SQL Server.

· Minimum 1-2 years software development experience.

· Good analytical and problem-solving skills.

· Able to work independently as well as within a team.

· Travelling to oversea for project deployment is required.

· Experience in web application development is a plus.

· Experience in Windows system administration is a plus.

· Experience in IT network administration is a plug.

· Fresh graduates are welcome to apply.

• Reviewing and revising testing procedures.
• Conducting inspection checks on goods and production processes.
• Performing manual and automated quality checks.
• Ensuring employees adhere to safety and quality regulations.
• Reporting safety and quality infringements to the QA manager.
• Identifying possible areas for improvement in quality control processes.

• Reviewing and revising testing procedures.
• Conducting inspection checks on goods and production processes.
• Performing manual and automated quality checks.
• Ensuring employees adhere to safety and quality regulations.
• Reporting safety and quality infringements to the QA manager.
• Identifying possible areas for improvement in quality control processes.

JOB DESCRIPTION

• Conduct inspection of incoming, in-process and final inspection on machined parts, weldments and assemblies as per technical drawings, customer’s specifications and requirements through the use of various types of inspection equipment set up
• Perform dimension check on parts, components and tools using micrometers, calipers, comparators, indicator, CMM & CREAFOAM
• Perform visual, mechanical and functional check on components.
• Report non-compliance parts to QA Engineer
• Performs visual and dimensional inspection of incoming and outgoing components/parts
• Understand current specifications involving inspection tolerances, limitations, and procedures.
• Responsible for conducting inspection in accordance with approved technical data.

REQUIREMENT

• GCE ‘O’ / ‘A’ Level with minimum 2 year working experience or
• Diploma in Mechanical / Manufacturing / Quality Management with minimum 1 year working experience.
• Good interpersonal skill and ability to communicate with all levels.
• Good understanding of technical drawing
• Familiar with all inspection methods and techniques
• Basic understanding of General Dimension & Tolerance control
• Proficient in the use of various types of inspection equipment and visual inspection aids

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distribute to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Resolves quality related issues arising from sub-contractor and in-house production
• Performs E&I related Equipment and material inspection during receiving meet the purchase specifications
• Ensures protection and preservation of Electrical & Instrument system
• Ensures updates on electrical completion and mechanical completion progress at the project database
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing/ commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issues improvement note, where necessary
• Performs any other assigned duties and responsibilities

Requirements:

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Electrical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Familiar with loop test, hi pot test, mechanical completion checks ITR

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Roles & Responsibilities

Responsibilities & Job Descriptions

• Developing and managing project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Manage and deal with site technical & design issues, communicate & liaise with Clients, Architects, Consultants, Developers & key stakeholders of project from beginning to till final completion of project.
• Managing procurement processes, including Tendering, bid evaluations, contract negotiations and vendor selection.
• Conducting regular site inspections to assess project progress and cost control.
• Manage and coordinate all aspects of assigned projects from start to finish, ensuring that projects are smooth in operation and completing on time, within budget, good quality and to the satisfaction of clients.
• Develop and maintain project documentation, including project plans, progress reports, and other project-related documentation.
• Attend all required site project meetings with consultants and clients, including necessary follow-ups and ensuring that project goals and objectives are met for all the projects in the company.
• Setting up site meeting with subcontractors, internal team members, and project related vendors to ensure effective progress of project.
• valuation of Monthly Progressive Claim to Client & reconcile.
• Verify and approve periodical assessment of progress claims of sub-contractors/suppliers with the Project QS/Purchaser till the settlement of final account.

Qualification

• Bachelor’s degree in any Civil / Construction Engineering discipline or equivalent
• At least 10 years overall work experience is required.
• At least 7 years relevant project control management work experience is required for this position.

Requirements

• Proficiency with project management software and tools (i.e. Primavera, MS Project, Autocad, etc).
• Able to work in project sites and travel for meeting in different venues as required.
• Understand the Drawings and able to take-off quantities and create the budget and monitor the cost throughout the project.
• Liaise with Government Authorities for getting the approvals for proceeding the site activities.
• Other ad-hoc duties required to carry out.
• Able to work for Extended hours.