Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Roles & Responsibilities

Job Description:

Prepare and analyze cost comparison

Obtaining quotations, liaising and negotiate with sub-contractors and suppliers

Responsible for measuring quantities and taking off

Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments

Prepare tender and contract documents, including bills of quantities with the architect and/or the client.

Undertake cost analysis for repair and maintenance project work

Assist in establishing a client’s requirements and undertake feasibility studies

Perform risk, value management, and cost control

Identify, analyze and develop responses to commercial risks

Prepare and analyze costings for tenders

Allocate work to subcontractors

Provide advice on contractual claims

Analyze outcomes and write detailed progress reports

Value completed work and arranged payments

Maintain awareness of the different building contracts in current use

Understand the implications of health and safety regulations.

All other QS related job

Job Requirements:

Degree / Diploma in Constructions Building or its equivalent

Ability in contract negotiation, contract administration & variation orders

Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

To be able to read and understand hydraulic schematic

To have hydraulic troubleshotting knowledge

To be able to work onsite independently

To work with a team of service engineer and technician

To know how to repair hydraulic cylinders, pump and hydraulic power unit

Simple design of hydraulic system is an advantage

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Control Risks is seeking an Associate Director to play a key role in growing the crisis and security consulting practice across Southeast Asia (SEA). This position will focus on developing deep and profitable client relationships, driving the growth of the crisis and security consulting practice in SEA, and ensuring quality service delivery across our range of consulting engagements, including crisis management, crisis response, business continuity, and security risk management issues.

Building and maintaining successful relationships with existing Control Risks clients will be important for this role and identifying and pursuing new clients and business development opportunities to expand the crisis management, business continuity and security risk management opportunities in the region is crucial.

Role tasks and responsibilities:

• Cultivate, grow and deepen Control Risks’ relationships with security and risk buyers in our Client organisations, being seen as their “go to” person within Control Risks.
• Identify, nurture and help win new business development opportunities.
• Actively lead on business continuity and crisis management projects from first client enquiry to proposal development, task servicing, quality assurance and project closure
• Project manage and, utilising a regional team of consultants and experts, deliver the full range of security consulting and services engagements in Southeast Asia and across Asia broadly, when required.
• Deliver consultancy services to clients by developing innovative solutions to complex risks. You will be responsible for scoping and delivering across a broad range of business risk activities, including crisis management and business continuity workshops, audits, gap analyses and risk assessments
• Provide mentorship to junior staff, maximising use of resources. Ensure continuous skills transfer, coaching and planning is provided.
• Work collaboratively with country management, marketing teams and other practises to develop a consistent, credible and highly visible brand.
• Represent Control Risks as a thought leader through market engagement via channels such as social media, professional organizations and industry events.
• Seek innovative ways to improve services we offer to clients.
• Ensure that practices, polices, strategy and services represent the client best interest.

Essential:

• Experience in a corporate/consulting environment working with multinational companies in Singapore specifically, and across SEA generally
• Strong commercial expertise, analytical (financial management, legal and contractual skills), leadership
• Ability to build relationships with senior-level clients and other consultants globally
• Experience in a multi-cultural environment and demonstrated cross-cultural awareness
• In depth knowledge of commercial/operational conditions across South Asia

Preferred:

• Experience in one or more of the following: business continuity, crisis management, risk assessment following recognized international standards, security planning and framework development
• Experience working in multi-disciplinary teams
• Experience managing crises and/or complex problems
• Demonstrable experience in applying risk management methodology such as (ISO 22301, ISO31000, SOC 2, ISO 27001, etc.)

Qualifications and specialist skills:

• Educated Bachelor’s degree or equivalent
• Strong commercial expertise, analytical (financial management, legal and contractual skills), leadership
• Good client (internal and external) management and consulting skills
• Effective decision making and judgement
• Excellent planning and organizational skills
• Assertiveness and drive with strong influencing skills
• Strong interpersonal skills-building trust and rapport
• Excellent communication skills – written and oral (informal and presentation)
• IT literacy – MS office packages, advanced Excel
• Strong management and communication skills (including concise and accurate written skills)
• Project management skills

• Control Risks offers a competitively positioned compensation and benefits package that is transparent and summarised in the full job offer.
• We operate a discretionary global bonus scheme that incentivises, and rewards individuals based on company and individual performance.
• Control Risks supports hybrid working arrangements, wherever possible, that emphasise the value of in-person time together - in the office and with our clients - while continuing to support flexible and remote working.
• As an equal opportunities employer, we encourage suitably qualified applicants from a wide range of backgrounds to apply and join us and are fully committed to equal treatment, free from discrimination, of all candidates throughout our recruitment process.

• Perform measurement and calibration using a Coordinate Measuring Machine (CMM)
• Generate and issue final reports
• Liaise with client on technical issues when necessary
• Maintain draft report format/template
• Maintain good housekeeping at workstations/areas
• Assist in the development and extension of new calibration scope
• Increase calibration productivity and efficiency by adopting improved system and methods
• Constantly strive to deliver outstanding services
• Listen to and anticipate the client’s needs and pains to offer the most suitable solution
• Manage timely trouble shooting and assist customers as necessary
• Build and foster collaboration with internal teams involved in service delivery
• At all times, adopt a safe behavior by exercising due regard for the health and safety of SGS employees and clients, in line with SGS policies and procedures
• Perform any other responsibilities assigned by senior management

Requirements:

• Diploma/Degree education in mechanical engineering or related engineering field
• 1~3-year experience in CMM measurement and equipment calibration.
• Technical knowledge and experience in related field
• Able to work independently and to coordinate several activities simultaneously
• Business and profit minded with related technical knowhow
• Competitive and profit-driven; re-invents competitive advantage.
• Able to interact with all levels of management
• Good communication, negotiation and interpersonal skills
• Works well under pressure, challenges status quo
• Applies judgment and acts according to the SGS standards of ethics and integrity

• Conduct laboratory tests and analysis in compliance with established laboratory standards, policies and processes, and record all findings accurately.
• Perform analysis at site laboratories or at field assignments.
• Prepare and standardize reagents and test solutions.
• Review, question and repeat results if suspicious results are encountered.
• Represent the Laboratory as witness at third party and refinery laboratory.
• Maintain cleanliness and safety of the laboratory, including apparatus, equipment and materials used.
• Assist in the practical training of new Analyst where assigned.
• Perform shift work and overtime when required.
• Perform any tasks as assigned by supervisor.
• Apply judgement and act according to SGS standards of ethics and integrity.

Requirements:

• Diploma in Science, Chemistry, Chemical Engineering or related fields.
  Minimum one year of relevant working experience in Oil, Gas & Chemical laboratory.
• Good knowledge of laboratory processes and safe handling of chemicals.
• Good knowledge and experience in handling Gas Chromatography and other scientific testing instruments.
• High attention to details, meticulous with good time management.
• Results and service-oriented.
• Team player with a positive working attitude.
• Able to multi-task and work independently within challenging timelines.

• Sell service and exceed targeted sales and expand market share.
• Develop & retain clients and negotiate contracts.
• Assist in business development & marketing.
• Meet targeted sales revenue
• Expand market share
• Draw prospect list and develop new clients
• Grow and retain key clients
• Develop new services/products and concepts for the assigned market segment.
• Translate business strategy into pragmatic action plans and execute
• Maintain awareness and understanding of all SGS services, ensuring that full range of SGS services are presented to new and existing clients to maximize sales opportunities
• Ensure timely creation of quotes and professional submission of all information as requested by clients, ensure follow-up
• Negotiate and secure contracts
• Manage pre and post contract commercial issues
• Support for collection of payment from clients
• Analyze market potential and develop competitive positioning and pricing strategies
• Track competitor activities
• Monitor market for the development of new technologies and trends.
• Source and coordinate with SGS affiliates and/or subcontractors for subcontract engagements
• Operate to the highest standards of ethics, in accordance with the SGS Code of Integrity
• Any other duties as assigned from time to time.

Requirements:

• Min Diploma in Science filed or equivalent
• Previous experience as lab analyst would be advantageous
• 3 years sales experience in chemical-related laboratory testing sales
• Technical knowledge of chemical related laboratory testing
• Able to work independently and multi-task
• Good business acumen and results orientated
• Able to interact with all levels of management
• Good communication, negotiation and interpersonal skills
• Acts quickly and decisively
• Works well under pressure, challenges status quo.
• Communicate effectively in English, both written and oral
• Team player and have service-oriented mindset

• Upkeep record of department equipment/assets.
• Execute both static and dynamic measurement such as dimension control and flow measurement not limiting to shore/ship tanks, piping, flow meters and instrument validation for custody transfer purposes.
• Process data collected and prepare all necessary reporting for review.
• Assist in the development and training of staff to required level of expertise.
• Ensure that all operations are conducted within client’s health and safety requirements.
• Assist in the implementation of department Quality system per the QA Manual.
• Perform any other task that may be assigned from time to time by Management.
• All jobs done in accordance to SGS Standard Procedures and/or Local Procedures where applicable.

Requirements:

• Diploma or equivalent in the field of Electrical or Electronic Engineering discipline
• Preferably 2 years of working experience
• Good computing skills and knowledge
• Possess local class 3 driving licence will be an added advantage
• Good communication, negotiation and interpersonal skills
• Good team player, works well under pressure and able to challenge status quo
• Able to work independently and to coordinate several activities simultaneously
• Able to ensure that process flow and work delivery is accurate and timely
• Able to give best customer care and services
• In addition, an added advantage for candidate who possess one or more of the following skills as follows:
• Instrumentation validation/verification/flow measurement
• Dimension control measurement via Total Station or theodolite
• Good computer knowledge in MS Office particularly Advanced Excel
• Any 3D software knowledge, autocad, etc…
• Coding or programing capability

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.