Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

1. Assist corporate clients in the establishing, implementation and maintenance of management system in accordance with various international and local standards such as ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 22000:2018, FSSC 22000, bizSAFE certifications,etc.
2. Provide professional advice and guidance to organization seeking consultation services.
3. Plan and execute project in accordance with client’s requirements
4. Able to work independently as will be working from home.
5. Conduct consultation at client premises.
6. Conducting internal audits and preparation of audit report
7. Any other duties as required by the Compan

Job Requirements:

1. Diploma or Degree in food science or food technology or safety and health related.
2. Minimum 1 years of working experiences in QEHS. Preferred those with experienced on QEHS / food safety consultancy and Quality, Environmental, Safety & Health experience.
3. Able to work independently and meet to each project timeline and deadline.
4. Candidate should be self-motivated and hardworking.
5. Candidate should be able to communicate effectively and interact with corporate clients.

General Overview

This position is part of the Instrument, Control and Electrical team that provides maintenance and technical support to the Production, Mechanical and Project teams in the LNG Terminal. This position is responsible for establishing, reviewing and overseeing the relevant instrument & control design of newly build or modified equipment including implementation of minor instrument and control engineering projects, while ensuring the overall technical integrity of the terminal from the instrument & control (I&C) discipline perspective.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical support and solutions for the Production and Maintenance teams for instrument-related issues
• Liaise closely with Production and Maintenance teams as to how to reduce instrument maintenance costs and increase availability and functionality.
• Liaise with external stakeholder including government agencies on possible gas pipeline network and electrical power grid, instrument and metering interfaces to ensure conformity.
• Prepare and update instrument maintenance procedures for all instruments, PLC, Fire & Gas system, ESD, metering, CCTV and security equipment is up to date
• Conduct root cause analysis for instrument related incident and recommend preventive and corrective actions to prevent future occurrence
• Carry out MOCs project to resolve and improve instrument reliability and operational issues from engineering, construction to commissioning
• Ensure verification, inspection, testing and reporting to management in respect of all electrical and instrument equipment used for maintenance and their certification for use in hazardous areas of the terminal.
• Participate and provide support in execution of maintenance or major equipment turnarounds in the terminal
• Manage functional safety lifecycle of SIS in the Terminal
• Support expansion project from meeting overall facility integrity point of view, ensure smooth integration and any opportunity to leverage with existing Plant is captured
• The incumbent shall also participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum eight (8) years practical experience in an instrument & control maintenance / design function in an oil & gas or petrochemical Plant
• Conversant with local codes, regulations and submission procedures, and must possess expert knowledge of electrical & instrument international engineering design
• Experience in functional safety for the process industry as per IEC 61511. Certified functional safety engineer will be an advantage
• Experience in installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical, instrument and control equipment in the oil, gas or petrochemical industry is required.
• Experience with common PLC programming software and languages and able to troubleshoot third party equipment issues through program debugging. Experience with Siemens PLC will be an advantage

Education

• The candidate must have a good Degree in Electrical & Electronics Engineering or equivalent.
• Candidate with professional accreditation or affiliation to professional bodies of engineers will have an advantage.

Performance Criteria

• Able to carry out day to day activities with minimum supervision.
• Able to perform installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical equipment and related instruments.
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Strong interpersonal, written and verbal communication skills
3. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties

1. Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
2. Preparation of reagents/diluents/ dissolution media as per STP.
3. Perform a various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
4. Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
5. Ensure implementation of SOP for all corresponding activities.
6. Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
7. Ensure real time documentation, maintain data integrity and appropriate traceability.
8. Assist in maintenance and calibration of test instruments per specifications.
9. Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
10. Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
11. Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
12. Responsible for QC lab and equipment/instrument cleanliness.
13. Responsible for procuring and receipt of QC lab glassware and consumables.
14. Any other activities as and when assigned by the Superior.

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are seeking Software Quality Assurance Engineer that strategises and delivers Whole-of-Government (WOG) secured infrastructure and services. Together with the team, you will be taking on exciting and challenging roles of delivering high quality and secure enterprise software solutions. This role we are hiring as a 3-year rolling employment contract.

A brief summary of your job responsibility:

• Create comprehensive, clear and well-structured test suites with test plans, test scenarios and test cases covering functional, performance and end-to-end testing.
• Develop, execute, and automate tests to ensure software quality in an Agile and Scrum software development environment.
• Define, track and report on testing and defect metrics.
• Identify software quality issues, investigate into defect root causes, and coordinate with team to resolve defects.
• Identify limitations of quality assurance process and innovate transformational solutions to improve the effectiveness and efficiency of software testing.
• Conduct research on modern software testing tools & methodologies and develop test automation framework.
• Drive continuous improvement in testing practices and tools.
• Leverage on DevSecOps to facilitate secure software testing and address bugs early in continuous development and testing cycle.

To succeed in this role, you will ideally have:

• Minimum 4 years of relevant experience in software/product testing is required.
• Detail-oriented with strong analytical and problem-solving skills.
• Motivated, self-directed, with good interpersonal skills and a collaborative team player.
• Proven work experience and knowledge of software quality assurance methodologies, functional/performance/security testing, testing tools, and processes, frontend and/or desktop testing.
• Knowledgeable of Agile software development methodology and secure software development lifecycle..
• Experience with programming languages such as C/C++, C# .NET programming, JavaScript, and Python scripting, would be an advantage.
• Experience with frontend/desktop automation software such as Selenium, SmartBear, would be an advantage.
• Experience with end to end testing of desktop products such as MS Office, VPN software would be an advantage.
• Professional certifications such as Certified Software Testing Professional (CSTP), Certified Software Quality Analyst (CSQA), would be an advantage.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Annual Leave Benefits with additional perks such as Family Care and Birthday Leave.
• Contract Staff enjoys the same benefits as Permanent Employees.

Quality Lab Support Coordinator

6 months contract

About the Company:
Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Receive, archive, retrieve and dispose retention sample, following standard work, approved procedures and regulatory requirements in timely manner.
• Maintain proper 5S and ensure inspection readiness of retention sample rooms.
• Perform assigned tasks within stipulated timeline and escalate discrepancies to Reporting Manager.
• Support laboratory supplies stock check, receiving, stock arrangement and disposal as necessary.
• Any other duties as assigned by reporting manager.

Requirements:

• GCE O Level qualification and above
• Proficient with computer software such as Microsoft Word & Excel
• The role will require the person to be able to move heavy boxes up to 15 KG during process like transfer of samples/stocks checking.
• Customer focus with strong business acumen and continuous improvement mindset.
• Critical thinking mindset with a collaborative and problem-solving attitude.
• Good communication and interpersonal skills.
• Ability to work effectively in a team-based environment.

Reg No: R22104540

EA License no: 94C3609

Job Description:

• Drive PGCS Quality programs and policies compliance across site, by partnership with functional stakeholders.
• Key contributor/promoter to the advancement of Quality function across the sites; creating and driving critical/key business objectives in line with supporting/partnering with Operations, Supply Chain functions etc.
• Lead incident management and resolution and champion customer quality across Singapore. Site lead for Quality and Food safety crisis mgmt.
• Lead the implementation of the Singapore Quality Strategy including communication, project management and roll out activities.
• Lead continuous improvement culture/productivity initiatives to support site BPI process, demonstrating best practices to implement all quality improvements
• Drive, support and champion KPIs, key Quality metrics, etc.
• Act as a business partner to other functions whilst championing Quality, to ensure an extended and consistent quality focus.
• Be a key member of the Site Leadership team and value add in driving functional and site agenda.
• Support and provide strategic guidance around NPIs, validation, Total Quality System, Compliance, Capital investment, etc.
• Partnership with other functions ensuring change control risk assessment and validation in place for Network capacity projects and other key projects and significant changes.
• Financial Management; Budgetary and AOP responsibilities/input.
• Compliance; drive partnership with other functions through the Quality team to achieve key business goals for the control environment. Compliance with all regulations and 3rd party auditing requirements.
• Provide strategic quality leadership to the extended Quality Team
• Organisation design & sustainability of a highly effective team with appropriate succession plan. Encourage, manage & promote people-related activities/processes, partnering with HR
• Develop capability, personal growth and career development for direct reports, support these activities with DRs’ associated teams.
• Play in instrumental role in developing the overall team capability, supporting and aligning with overall plant culture.
• Ensure the smooth transition of new products to the Singapore facilities.
• Manage the complexity of additional materials, packaging and concentrate components from a quality perspective as portfolio expands
• Support and implement PGCSSC global quality initiatives
• Systems improvements (including IT systems) in terms of Processing, GMP, Product Safety, Disposition and Traceability.
• A requirement of the role is that you must adhere to all PepsiCo Health & Safety requirements.

Qualifications :

• Bachelor’s Degree in Science, Food Technology, Chemistry or any other related discipline
• Minimum 7 years of relevant experience as a supervisor in operating Laboratory environment, manufacturing concern/MNC
• Ability to manage senior stakeholders and leadership team members
• Experience in People Management and prior supervisory skill
• Possess knowledge of and experience in GLP, HPLC / GC operation, SAP QM module and LIMS management
• Strong leadership presence, ability to manage and co-ordinate with cross-functional teams on investigation analysis, troubleshooting and issues resolution
• Knowledge of food safety quality standards such as HACCP and FSSC 22000
• Ability to lead change and drive behaviours
• Ability to organize and manage multiple priorities in high-pressure work environment
• Strong collaboration and influencing skills
• Excellent communication and interpersonal skills, both verbal and written with ability to clearly articulate ideas and proposals to all levels of the organization
• Positive and Can-do Attitude
• Willing to stretch and take additional responsibilities when needed
• Lead by example to others

Kindly note that this is a short-term role based in Singapore.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Sobono Group Profile

Sobono Group is a leading energy solutions provider in the Asia Pacific region, committed to sustainability and innovation. We are developing the RExus Waste Wood to Energy (WWtE) Plant and, in parallel, other renewable energy plants regionally.

Job Position – Electrical & Instrumentation Control (E&IC) Engineer

The Electrical Engineer will play a critical and challenging role in the design, engineering, and construction of the electrical systems for the RExus WWtE Plant. This position will be responsible for overseeing all electrical engineering aspects of the project, ensuring compliance with industry standards and project specifications.

Key Responsibilities:

· Develop, execute, and manage capex projects according to company guidelines, meeting operational, technical, commercial, and HSEQ standards.

· Develop and review electrical design drawings, schematics, and specifications.

· Coordinate with other engineering disciplines (mechanical, civil, instrumentation, and control) to ensure seamless integration of electrical systems.

• Prepare detailed electrical equipment and system specifications.

· Interpret and implement project technical specifications, attend meetings for technical clarifications, and facilitate identifying and mitigating engineering risks.

· Review and approve vendor documentation, including equipment data sheets and technical specifications.

• Oversee the procurement and installation of electrical equipment.
• Perform site inspections and commissioning activities.
• Ensure compliance with relevant electrical codes, standards, and regulations.
• Troubleshoot electrical issues and implement corrective actions.
• Prepare technical reports and documentation.
• Coordinate with the project team to ensure timely completion of electrical work.

Qualifications:

• Bachelor's degree in Electrical Engineering or related field.
• Minimum of 3 years of experience in electrical engineering, preferably in the power plant or industrial sector.
• Strong knowledge of electrical design principles, standards, and regulations.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, ETAP).
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.

Preferred Qualifications:

• Knowledge of power plant control systems and automation.
• Experience in project management.

Job Responsibilities

1. System Design and Development

• Design motion control systems, including hardware and software components.
• Develop and test control algorithms for precision motion systems.
• Create detailed design specifications and documentation.

2. Component Selection and Integration

• Select appropriate sensors, actuators, motors, and controllers for the motion control system.
• Integrate components to ensure seamless operation and optimal performance.
• Work with suppliers and vendors to source high-quality components.

3. Simulation and Testing

• Conduct simulations to predict system behavior and validate design choices.
• Develop and implement testing protocols to evaluate system performance.
• Troubleshoot and resolve issues identified during testing.

4. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers.
• Communicate design concepts and progress to stakeholders.
• Collaborate with manufacturing teams to ensure designs are feasible and cost-effective.

5. Optimization and Improvement

• Continuously improve motion control systems for better efficiency, accuracy, and reliability.
• Stay updated with the latest advancements in motion control technology.
• Implement feedback from field tests and customer use to refine system designs.

6. Project Management

• Manage project timelines, budgets, and resources.
• Ensure projects meet deadlines and quality standards.
• Coordinate with project managers and other engineers to align with project goals.

Required Skills and Qualifications

1. Technical Skills

• Proficiency in motion control technologies and principles.
• Experience with CAD software for designing mechanical and electrical components.
• Knowledge of programming languages (e.g., C/C++, MATLAB, Python) for developing control algorithms.
• Familiarity with PLCs (Programmable Logic Controllers) and HMI (Human-Machine Interface) systems.

2. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot complex motion control issues.

3. Education and Experience

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Robotics, or a related field.
• Relevant experience in designing and implementing motion control systems.

4. Soft Skills

• Excellent communication and teamwork skills.
• Strong organizational and project management abilities.
• Attention to detail and a commitment to producing high-quality work.

Additional Responsibilities

• Compliance and Safety

• Ensure all designs comply with industry standards and safety regulations.
• Conduct risk assessments and implement safety measures in system designs.

• Innovation and Research

• Engage in research and development to explore new motion control technologies.
• Innovate and propose new solutions to enhance system performance and capabilities.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a Specialist you will be responsible for support and administration (system back-up, user access administration) for LIMS, MODA and other related Laboratory computerized systems. This role also requires to process the LIMS and MODA static data requests

Responsibilities

• Support and administration (system back-up, user access administration) for Sample Manager LIMS, MODA LIMS, iLAB, and other related Laboratory computerized systems
• Maintenance of LIMS static data (Sample Manager LIMS, MODA LIMS and STATISTICA systems)
• Support for installation and qualification/ validation of software related aspects of computerized instrumentation
• Actively contributes to operational efficiency/continuous improvement initiatives.
• Support system audit trail review all related Laboratory computerized systems
• Maintenance of software related changes to computerized instruments
• Server and database maintenance and administration as relates to laboratory systems
• Provide training for the roll-out of new computerized systems.
• Generation and execution of computer validation documentation (protocols and reports)
• Can identify computer related issues; troubleshoot, identify and complete or coordinate deviation, change control and/ or corrective action records.
• System/ equipment manufacturer and or vendor interaction as required in order to trouble shoot system issues.
• Available to troubleshoot and resolve critical system issues as they occur.
• Experience manages projects (people/ team environment) to meet the timelines.
• Customer and regulatory agency interaction as required.
• Oversight of computer system policies and procedure in order to ensure policy is aligned with current regulatory expectations.
• Familiarity with 21 CFR Part 11 and EU Annex 11 requirements, data integrity requirements and expectations as well as common industry practice with respect to laboratory computerized system management and administration.
• SME in 1 or more areas as aligned with training plan.

Experience

• Degree/Diploma in relevant Science field or Equivalent
• Minimum 5 years of experience
• Relevant work experience preferably Lab related IT experience in a biotech or medically related field.
• Experience in lab computer systems essential (prefer experience with LIMS, and CDS –Chromatography Data Systems

​

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

R63209

Quality Inspector (Jurong East)

working hours: 5 days - 8am - 5.30pm + evening/ weekend OT

base salary + OT pay + 1 month AWS + company shuttle bus (no VB)

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

To fabriacte new electrical panel

To know how to troubleshoot electrical issue

To run electrical wiring

To write electrical program on PLC

To help with mechanical work

To go onsite to do electrical installation or onsite troubleshooting

To work with a team or able to work individually

Able to do electrical schematic drawing

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

·Able to work on PH ,Night shif and Weekend

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

This is an exciting position who is responsible for QA oversight of Aseptic Processing Program, Environmental Monitoring and Microbial Control Policies for the Cell and Gene Therapy entity. Role will provide oversight and sterility assurance expertise to Operations to assure aseptic processing meets US and international aseptic processing requirements ( FDA Sterile Product Aseptic Processing Guidance and Eudralex, Annex 1,” Sterile Medicinal Drug Products”, ISO 13408 and 21CFR820).

The role will also provide strategic plan and expertise for the development and implementation of the Microbial Control Strategy. Develop, document and manage microbial control strategy for production processes from incoming raw materials through final product release.

Key responsibilities:

• Provide support and expertise to ensure that Cell and Gene Therapy (CGT) and Media preparation operations and support functions for Cleanroom management, Materials Management, Aseptic practices, Environmental monitoring (EM). Sterilisation methods, and Aseptic process simulations (APS) to confidently deliver CT products to patients with the highest quality sterility assurance level.
• Review policies and procedures and related completed media fill/APS documentation, Environmental Monitoring sample plans, cleanroom qualifications, environmental monitoring excursions, deviations and sterility failures.
• Provide Sterility assurance expertise to support APS/EM deviations and investigations, CAPAs and Complaints related to aseptic processing.
• Review of sterile filter validations, integrity testing and procedures.
• Provide expert support and assessment to business partners including production, MSAT, Engineering, QC and QA assuring adequate facilities contamination prevention practices, monitoring tools are provided to production to guarantee the best EM indicator levels.
• Involvement in global harmonization/ efficiency projects; begin to lead aspects of global projects within specific areas.
• Represent site in global forums from sterility assurance perspective. Collaborate with stakeholders of different functions to lead/implement various global/site projects to support sterility assurance.
• Support regulatory and client audits as Aseptic sterility assurance subject matter expert
• Responsible for the generation of key performance indicators, GEMBA walks, regulatory compliance and efficiency targets.
• Communicate quality operations and compliance perspective effectively to senior management.
• Understand and articulate company business strategy. Maintains a broad view of the business recognizes changes and trends in the appropriate area in which the individual operates.

Key requirements:

• Engineering/ Life Science Diploma/Degree or higher from recognized institution with significant years of QA or QC Sterile processing and Microbial experience in similar capacity.
• GMP experience in the biologics industry is required.
• Working knowledge of microbiological and sterility testing, media fills, environmental monitoring , clean room qualification and management, quality control endotoxin testing and microbiological control strategy required.
• Experience with oversight of aseptic processing and the associated international aseptic processing regulations are required.
• Experience in cell culture, cell or gene therapy experience is a plus.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

R63423

Reponsibilities:

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline.
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry.
• Able to interpret drawings and technical documents
• Able to work independently and contribute to the team excellence
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• NDE level 2 inspector is an advantage

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Internal Code: A24115

What will you do?

• Design and implement comprehensive test plans, test cases, test data and test scripts to ensure the quality of software products.
• Collaborate with Product Owners and stakeholders to define test objectives, scope and entry/exit criteria for testing phases.
• Perform system testing (e.g., functional and performance testing).
• Develop and maintain automated test scripts and tools.
• Review and analyse test results, identify defects and anomalies and work closely with the stakeholders to resolve issues.
• Continuously improve the software testing process by identifying areas for improvement in testing practices and tools.

What are we looking for?

• Strong background in Computer Science, Computer Engineering, Information Systems Management, Information Technology or related disciplines.
• At least 3 years of experience in software quality assurance testing.
• Strong knowledge of software testing methodologies, tools and processes.
• Experience with test automation tools such as Selenium or similar.
• Experience in performance testing tools such as JMeter or similar.
• Experience with programming languages such as Java, Python
• Experience in issue management and continuous integration tools such as Jenkins, JIRA, or similar.
• Familiarity with Agile development methodologies and experience working in Agile teams.
• Familiarity with cloud-based testing tools.
• Knowledge of security testing methodologies.
• Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills and strong collaboration skills.
• Ability to work independently and as part of a multi-disciplinary team.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.