Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
  Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Degree / Diplom in Science, Electrical / Instrumentation / Process Control System

Prepare the ITP, QA / QC Check List, Quality plan and submit the documents to Client as per Pharma / Wafer Plant requirement

Monitor the Quality and provide the training for workers if quality lack before Client Inspection

Project Management and Quality Inspection with Client, Main contractor and Sub Contractor

Quality trainning including practical to the own team and Sub contractors.

Coordinate with Consultants, Clients, Sub Main contractor Manager / Engineer for update the site installation, Red Marking Drawings for approval, BOQ for Construction Works Execute

Must Experience in the usage of Bim MEP (Revit / Navis / NWD Software and 3D ) model to submit the drawing to clients

Prepare the materials BOQ to procurement team

Observation of the Safety violation and Correcting the unsafe works

Prepare the RA, SWP and MOS as per client required

Roles & Responsibilities:

• To look after worksite environmental, health & safety, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards.
• Advise & train workers, staff and site personnel on EHS.
• Responsible for monitoring all activities on site and ensure that all contractors comply with the requirements of environmental compliance.
• Record, compile and prepare HSE reports and submit site environmental control report periodically.

Requirements:

• Registered ECO with NEA.
• WSQ Certificate in Workplace Safety and Health.
• At least 5 years of experience in the building & construction industry as a Registered ECO.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Summary Benefit:

• Salary range: $2000-$2800
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Job Description:

• Responsible for implementing all QA/QC inspection and testing, as required by specifications or by regulatory requirements and shall be familiar with all aspects of testing required for commercial building including the quality testing requirements of local Authorities such as the Standards, Productivity and Innovation Board (SPRING Singapore)
• Monitor progress and quality of all C&S, Archi, M&E and security system works, including CONQUAS, Green Mark etc to ensure compliance to project and statutory requirements
• Review procedures to improve productivity.
• Attends meetings with client, authorities, subcontractors and consultants.
• Ad-hoc duties as assigned

Requirements (Qualification & Experience):

• Preferably university graduate in Electrical/Security/Computer Engineering or IT recognised by PEB Singapore.
• Ten (10) years of relevant experience in the implementation and management of quality control systems
• Familiar with BIM for construction, Green Mark, CONQUAS and relevant authority requirements
• Full time stationed on site during construction

At EY, you’ll have the chance to build a career as unique as you are, with the global scale, support, inclusive culture and technology to become the best version of you. And we’re counting on your unique voice and perspective to help EY become even better, too. Join us and build an exceptional experience for yourself, and a better working world for all.

EY Assurance group is one of the most trusted, respected and influential business unit in the industry. As part of our team, you will provide our clients including companies, investors and regulators a peace of mind by using your skills and experience to them confidence in the validity of financial statements and business-critical information or processes. Groups (or, as we call them, sub-service lines) within Assurance include External Audit, Climate Change and Sustainability Services, Financial Accounting Advisory Services and Fraud Investigation & Dispute Services.

Join our External Audit team and you will help our clients meet their reporting requirements by providing an objective and independent examination of their financial statements. In addition, you will conduct timely and constructive discussions with the management on accounting and reporting matters and provide a robust and clear perspective to audit committees.

The opportunity

We are seeking a driven and ambitious Manager to join this exciting and fast-growing area of our business. You will play a key role in driving growth by developing new and enhancing existing client relationships, leading highly skilled project teams and delivering a first-class customer experience through high profile engagements. In return for helping us to build a better working world, you can expect excellent career opportunities within a dynamic and collaborative environment.

Your key responsibilities

• Manage assurance engagements by defining the audit strategy in consultation with the senior manager/partner and execute it in compliance with EY's policies and protocols. When required, you'll personally execute complex audit procedures and lead teams or parts of teams on engagements, depending on the size of the engagement.
• Manage projects and engagements profitably by leading the team to perform efficiently.
• Monitor the assurance team's progress against the plan and alter it when needed
• Cultivate and manage business development opportunities. Generate new audit business opportunities by understanding EY and its service lines and actively assess/present ways to apply knowledge and services.
• Coach and develop people by sharing knowledge with team members and helping team members attain experiences that cultivate technical competencies.
• Develop people by encouraging individuals to think for themselves and take responsibility for their contributions to the assurance team.
• Conduct timely performance reviews and provide performance feedback/on-the-job training
• Maintain cooperative relationships with other assurance teams
• Develop and maintain long-term productive client relationships and networks.

Skills and attributes for success

• Work effectively as a team member, sharing responsibility, providing support, maintaining communication and updating senior team members on progress.
• Contribute ideas/opinions to the assurance teams and listen/respond to other assurance team members' views
• Demonstrate professionalism and competence in the audit client's environment.
• Strong written and verbal communication skills
• Good project management skills
• Integrity within a professional environment

To qualify for the role you must have

• A Bachelor's degree in Accounting, Finance, or a related field.
• Obtained CPA Singapore qualification
• At least 6 years of related work experience

Ideally, you’ll also have

• Prior working experience in global professional services organization or mid-tier firms will be highly advantageous

What we look for

Highly motivated individuals with excellent problem-solving skills and the ability to prioritize shifting workloads in a rapidly changing industry. An effective communicator, you’ll be a confident team player that collaborates with people from various teams while looking to develop your career in a dynamic organization.

What we offer

• Continuous learning: You’ll develop the mindset and skills to navigate whatever comes next.
• Success as defined by you: We’ll provide the tools and flexibility, so you can make a meaningful impact, your way.
• Transformative leadership: We’ll give you the insights, coaching and confidence to be the leader the world needs.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Trinax is a creative technology agency dedicated to producing the highest quality omni-channel experiences across marketing, gaming, and technology. Our award-winning projects combine innovative, interactive technologies with creativity. As we expand, we're looking for a disciplined and motivated Quality Assurance (QA) Lead to join our team!

As a QA Lead, you will play a crucial role in leading the QA process, ensuring that every project we deliver meets the highest standards. You will collaborate closely with software and project teams, providing insightful feedback and adopting new tools and technologies to enhance our work quality.

Key Responsibilities:

• Lead and manage the QA process, providing guidance and mentorship to the QA team.
• Review and analyze system specifications to develop comprehensive test strategies and plans.
• Execute test cases (both manual and automated) and analyze results to ensure the highest quality product delivery.
• Collaborate closely with the software team to develop effective testing strategies, ensuring a smooth process throughout the software development lifecycle.
• Document and log testing phases and defects, reporting bugs and errors to the development team.
• Provide clear, tactful, and insightful feedback to the software team, maintaining strong working relationships.
• Advise teams on potential software improvements, contributing to better design and development.
• Present findings and recommendations clearly to stakeholders, demonstrating how to enhance software performance.
• Work under pressure to meet tight deadlines, ensuring timely, high-quality deliverables.
• Stay current with new technologies and testing tools to continuously improve QA processes.

Key Qualifications:

• Minimum of 2 years of relevant QA experience.
• Diploma or higher education qualification in a relevant field.
• Specialized accreditations in QA or Software Testing preferred.
• Strong understanding of the software development process and ability to quickly grasp business and customer expectations.
• Analytical mindset with excellent problem-solving skills and attention to detail.
• Strong communication and consultancy skills to effectively relay issues and insights to the software team.
• Solid presentation skills to demonstrate how the software can be improved.
• Ability to thrive in a fast-paced environment, managing tight deadlines and pressure.

Why Join Trinax? At Trinax, you will have the opportunity to work on exciting, innovative projects across various disciplines, collaborate with passionate professionals, and enhance your skills with the latest technologies and tools. If you're motivated by creativity and quality, we want you on our team!

Apply today and help us deliver exceptional, quality-driven experiences to our clients.

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Control & Instrumentation team as a key player in ensuring the reliable and efficient operation of their power plant's control systems and instrumentation.

Below are some of the key responsibilities for the role;

• Lead the execution of maintenance work, ensuring compliance with safety and regulatory requirements
• Respond to plant failures and forced outages, ensuring timely rectification and restoration
• Plan and execute plant overhaul activities with a focus on safety and timeliness
• Develop and implement modification and upgrading plans to enhance system reliability and availability
• Manage procurement and maintenance needs, including spare parts and external services
• Lead and develop a team of technical officers and technicians
• Demonstrate expertise in Control and Instrumentation, safety, and statutory requirements
• Showcase strong work ethics, analytical skills, and communication abilities
• Be available for emergency calls and participate in CERT team responses

What you'll need to succeed

The successful candidate, should have;

• Degree in Electronic & Electrical Engineering or equivalent
• Sound knowledge of Control and Instrumentation
• Good working knowledge of safety and statutory requirements
• Strong work ethics and team player mentality
• Analytical, technology, and communication skills
• Availability for standby and emergency calls
• Knowledge of cyber security (advantageous)
• Safety mindset and good workplace safety behavior

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Responsibilities

You will assist in the tasks of the Quality Service and Finance units for the client, with a focus on both quality service and finance support, including:

Quality Service tasks:

1. Addressing clients' queries over the phone and via emails.

2. Attending to walk-in clients.

3. Providing administrative support to the QS team as needed.

4. Any other duties assigned by the QS Manager.

Finance tasks:

1. Handling procurement tasks and managing stock of pantry/stationery items.

2. Scanning, filing, and organizing documents.

3. Checking details in SCMS for investigations, processing refunds, and resolving discrepancies in backlog or current cases.

4. Assisting with the implementation of NETS at kiosks.

5. Sending email reminders to Hakams to submit claims.

6. Any other duties assigned by the Finance Officer/Manager.

Working Arrangement:

Working Hours:

Mon to Thurs – 8am to 5.30pm

Fri – 8am to 5pm

Sat-Sun and PHs - Not working

Duration: 6 Months

Location: Lengkok Bahru

Requirements:

1. Diploma in any discipline. Candidates without a diploma but with relevant work experience will also be considered. Fresh graduates are welcome to apply.

2. Proficient in Microsoft Office Suite (Word, Excel, PowerPoint) and the ability to work with multiple IT systems.

3. Good communication and writing skills

4. Organized with excellent time management skills and the ability to prioritize tasks effectively.

5. Ability to handle sensitive information with confidentiality.

6. Meticulous attention to detail, ensuring accuracy in document handling, procurement, and financial tasks.

7. Strong problem-solving skills and the ability to identify and resolve discrepancies in a timely manner.

8. A proactive, self-motivated individual who can work independently and collaboratively within a team.

9. Able to handle multiple tasks and work under pressure, while maintaining a high level of professionalism.

10. Passionate about serving the community and demonstrating empathy and respect when dealing with clients and colleagues.

EA License No.: 96C4864

Reg. No.: R22110485

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Job Summary:

We are looking for a highly skilled Senior Supplier Quality Engineer to lead quality initiatives across our supplier base for thermal cooling solutions in the electronics and computing industry. The ideal candidate will be responsible for ensuring supplier quality and process reliability, working closely with suppliers to meet product excellence standards.

Key Responsibilities:

• Supplier Quality Monitoring & Improvement: Develop and implement supplier quality monitoring systems to ensure materials and components meet required quality standards. Identify and resolve non-conformance issues with suppliers.
• Supplier Process Optimization: Partner with suppliers to enhance their processes, improving yield and ensuring consistent quality of materials and components.
• Abnormal Quality Issue Management: Lead efforts to address and resolve abnormal quality issues with suppliers, implementing corrective and preventive actions.
• Supplier Audits & Compliance: Conduct supplier audits to assess quality systems, process capabilities, and compliance with industry standards. Drive continuous improvement initiatives based on audit findings.
• Supplier Development: Collaborate with suppliers to enhance their quality processes, ensuring alignment with company standards and customer expectations.
• Cross-Functional Collaboration: Coordinate with design, production, and procurement teams to ensure effective communication and alignment on supplier quality expectations.
• Continuous Improvement: Foster a culture of continuous improvement by working closely with suppliers to enhance their quality management systems and manufacturing processes.

Requirements:

• Bachelor's degree in the related field
• Proven experience in supplier quality engineering, particularly in manufacturing or electronics environments.
• In-depth knowledge of supplier quality management systems and industry standards.
• Strong analytical, problem-solving, and negotiation skills.
• Familiarity with supplier audits, corrective actions, and continuous improvement practices.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel extensively and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

[1 year contract, renewable]

As a Software Quality Engineer, you'll enhance software delivery and quality by designing, implementing, and maintaining comprehensive testing coverage from development through production. You'll focus on creating automated test scripts rather than just finding bugs, helping developers improve their own processes. Your role involves working in agile teams, tackling a variety of technical challenges, and performing exploratory testing to identify risks. This position offers rapid career growth and access to cutting-edge technologies and extensive infrastructure.

Responsibilities:

· Build advanced automated test suites to exercise our world-class applications.

· Work with the development and other engineering teams to automate testing, applying risk-based strategy.

· Conduct static and dynamic application security testing (SAST) and (DAST).

· Conduct load and performance testing to identify application bottleneck.

· Conduct research on emerging technologies related to application quality.

· Analyse and decompose complicated software systems and design a strategy to test these systems.

· Work with Product Owner and Business Analyst to craft out user story acceptance criteria.

· Conduct application performance and security testing to ensure we have a robust and secured system in place.

· Implement and maintain regression test suite in QA nightly build.

· Actively refine smoke test suite in Development CI environment.

· Lead system integration testing with other system owners.

· Manage user acceptance testing/alpha testing and defect life cycle.

· Drive continuous improvement in Agile testing practices and tools.

· Ability to interpret the application source code and experience of using different cloud providers services such as AWS, AZURE and GCP

Qualifications:

· Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

· Min 5 years’ experience in one or more of the followings: Application exploratory testing and regression test automation

o Application performance testing

o Application security testing

o Strong analytical skills.

· Meticulous attention to details.

· Good interpersonal skills such as tactfulness.

· Good presentation and listening skills.

· Experience in agile development environment will be an added advantage.

· Experience with open-source automated testing framework like Playwright, Cypress, Robot Framework, Cucumber, Appium, Selenium or enterprise level testing tools (Tricentis QTest/TOSCA, Micro Focus UFT or Micro Focus ALM/Quality Center) will be an added advantage.

· Experience with open-source performance testing tools like K6, JMeter, Locust or enterprise level testing tools (Micro Focus LoadRunner) will be an added advantage.

· Experience with open-source security testing tools like ZAP, Burp Suite, SQL Map, Clair, etc or enterprise level security tools (Mirco Focus Fortify On Demand, Prisma Cloud, Veracode, Nessus or CheckMarx) will be an added advantage.

· Experience to setup the pipeline with CICD tools, such as GitLab, Bamboo and etc.

· Certified Software Testing Professional and/or Certified Software Quality Analyst and/or CREST/OSCP certification will be an added advantage.

Territory: To do technical service for Infineon's clients.

Job Description:

1. Equipment Maintenance:

• Perform regular maintenance and calibration of equipment to ensure optimal functionality, particularly for Infineon project requirements.
• Develop and implement preventive maintenance schedules to minimize downtime.

2. Mechanical Troubleshooting:

• Diagnose and resolve mechanical issues promptly to prevent production delays in the Infineon project.
• Use technical manuals, schematics, and diagnostic tools to identify problems.

3. On-Duty Business:

• Serve as the primary point of contact for Infineon customers regarding quality issues.
• Ensure timely and effective communication with Infineon customers to address their concerns.
• Document and report on quality incidents, providing detailed analysis and solutions.
• Willing work in night shift

4. PLC Skills:

• Utilize PLC (Programmable Logic Controller) skills to program, troubleshoot, and maintain automated systems specific to Infineon project requirements.
• Ensure that PLC systems are functioning correctly and efficiently.
• Provide training and support to team members on PLC operations and best practices.

Qualifications:

• Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Proven experience in equipment maintenance and mechanical troubleshooting.
• Strong knowledge of PLC programming and troubleshooting.
• Excellent problem-solving and analytical skills.
• Effective communication and customer service skills.
• Ability to work independently and as part of a team.
• Willingness to travel to Infineon customer sites as needed.

MKS is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, we are seeking an experienced Quality Assurance Engineer to work in our Singapore Laser Manufacturing facility in Kaki-Bukit, Singapore who can drive improvements in the quality and reliability of fiber based and solid-state laser products and production processes. This role will have responsibility for developing, maintaining, and improving the Quality control systems and processes for a variety of critical laser systems as well as leading by influence to drive quality within the culture of the organization.

A successful candidate will have a strong work ethic to meet the occasional high intensity workload for customer commitments. A persuasive personality with strong communications skills is needed to influence key cross-functional stakeholders.

Key responsibilities:

• Quality engineering support for manufacturing and project management
• Develop inspection requirements; facilitate PFMEAs; resolve discrepant material issues and create and maintain quality documents such as control plans and inspection plans
• Act as the quality interface for the laser production team in responding to customer complaints using failure analysis, development of corrective and preventative actions and trend analysis
• Conduct audits, including closing out audit findings, create audit finding reports and determine proper corrective and preventative actions
• Coach and mentor Quality Engineers.
• Support validation activity of processes, equipment, and metrology
• Support and comply with the company Quality System, ISO, and requirements
• Establish and maintain quality control processes and procedures for optomechanical components and systems.
• Develop and maintain quality documentation including inspection plan, test protocols, quality control procedures and reports.
• Collaborate with suppliers to ensure their compliance with quality requirements and drive continuous improvements.
• Actively participate in Continuous Improvement Initiatives such as Lean Manufacturing or Six Sigma projects to enhance Quality, efficiency and cost-effectiveness.

Requirements:

• Bachelor’s/Master's Degree in Mechanical, Optical, Optomechanical Engineering or related Engineering Science
• 6 years of experience in engineering in a machining or manufacturing setting
• Experience in Optomechanical design including knowledge of optical principles, components and optical system integration.
• Solid understanding of Mechanical Engineering Principles including Structural analysis, Material selection, Tolerance analysis and Manufacturing Process.
• Knowledge in integrating optical components including alignment, fixture design and calibration procedures.
• Knowledge of quality systems, regulatory requirements, and industry standards
• Advanced knowledge of blueprint reading and GD&T
• Ability to operate a variety of inspection equipments
• Statistical expertise with DOE and Capability Studies
• Design software- CAD (e.g., SolidWorks, AutoCAD), Minitab, Python, Jump etc.
• Strong and thorough knowledge of quality engineering discipline, including:
• Quality data collection and data analysis
• Understanding of statistical methods, including population sampling, hypothesis testing
• Problem Solving techniques such as 8-D, 5-why, Fishbone / Fault tree, PFMEA, K-T

Preferred Qualifications / Competencies:

• Previous Laser or Optics industry experience is highly desired.
• Familiarity with statistical analysis techniques, such as Weibull Analysis and Gage R&R, as well as appropriate software tools, such as Minitab or JMP
• Familiarity with the following areas: Process Validations (IQ, OQ, PQ), Failure Mode and Effect Analysis (FMEA), Structured Problem Solving (8D) and/or Root Cause Analysis - Corrective and Preventive Actions (RCA-CAPA)
• Previous experience with Risk Management, Engineering Change Control, Handling of Deviations and Non-conformances & Lean Six Sigma
• Experience working with cross functional teams (Engineering, Operations, Sales)
• Ability to complete tasks in a timely manner, with excellent attention to detail and accuracy.
• Project Management Experience
• Self-motivated, ability to identify potential problems or improvements and possess the initiative to take appropriate actions as necessary.

We are looking for a QA Engineer proficient in Automation Testing, with keen interest in FinTech.

• Gain exposure to the FinTech Industry.
• Salary package up to $4,500 + AWS + VB (~2 months).
• Dynamic working environment.

Responsibilities

• Design, develop, and maintain automation frameworks for software & Hardware testing, process automation, and data integration.
• Create detailed test cases, test plans and maintain salable automation frameworks to support continuous integration and delivery processes.
• Execute automated test cases and analyze test results to identify defects, performance issues, and areas for improvement.
• Integrate automated tests with CI/CD pipelines.
• Identify areas where automation can improve operational efficiency and reduce manual intervention.
• Document automation processes, test cases, and results for reference and auditing purposes

Requirements

• Tertiary education in Computer Science or related field.
• Min 3 years’ experience in automation development using Python / Selenium / Appium.
• Strong knowledge of software quality assurance methodologies, tools and processes.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50775 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians

Requirements:

• Degree in Electrical / Electronics Engineering
• At least 3 years of experience in instrumentation
• Power Plant experience will be a plus

Account Manager:

Kerwin Tan Kai Bin (R1331624)

[email protected]

EA16S8107

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

• Performing the electrical wiring, termination, installation as per drawing for control panel, instruments and machine
• Able to work independently and proactively and work under fast pace environment.
• Able to assemble control panel for housing,food court and shop lot use
• Able to read and draw control panel drawing

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Control and Instrumentation team as a maintenance expert, responsible for ensuring the optimal performance of instrumentation and control systems in their power plant.

Below are some of the key responsibilities for the role;

• Executing maintenance work efficiently and effectively, with a focus on safety and regulatory compliance
• Troubleshooting and rectifying equipment failures and malfunctions
• Testing and recommissioning rectified systems and equipment
• Performing overhaul, inspection, calibration, and servicing tasks during scheduled plant outages
• Implementing modification and upgrading plans to enhance system reliability and availability
• Maintaining detailed records and reports using computer-based software (Maximo, MS Word, and MS Excel)
• Assisting Engineers and Technical Officers in maintenance work
• Supervising contractors and ensuring compliance with safety standards

What you'll need to succeed

The successful candidate, should have;

• Diploma/NITEC in Electronics Engineering
• Knowledge of Instrumentation and control systems
• 2 years of experience in the Power Plant or Oil and Gas industry (preferred)
• Self-driven and team-oriented with a positive work attitude
• Availability for standby and emergency calls
• Strong safety mindset and good workplace safety behavior
• Willingness to be part of the CERT team and participate in emergency responses

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Job Description:

• Facilitate execution of project plans and utilise appropriate methods and tools to track and drive progress of projects against set plans and timelines
• Collaborate and communicate effectively with relevant internal and external stakeholders related to the projects
• Track both internal and external quality project deliverables against project schedules
• Perform dimensional and geometrical measurements and inspection of manufactured components for evaluation of acceptability
• Approve parts for next process & data analysis.
• Review inspection result or data in accordance with inspection and test plans.
• Collate information for product and process quality metric management reports and provide summary statement to customers.
• Assist with various stakeholder to classify issues by implementing corrective and preventive actions (CAPA) plans
• Manage Internal and External CAR analysis
• Manage Sub-con NC parts investigation
• Identify opportunities and propose improvement on QMS related process & procedures within own work area and assist with the implementation of workflow improvements to improve efficiency
• Identify, diagnose and resolve process related issues by applying failure analysis, FMEA, 8D or SPC methodology
• Update and present QA monthly performance reports to internal stakeholder.

Requirements:

• Possess at least ITE/Diploma in Engineering (Mechanical), Engineering (Precision Engineering) or equivalent.
• Familiar with manufacturing process, precision engineering and quality assurance environment.
• High mix low volume work environment
• Independent and task prioritization
• Knowledge on Microsoft office software.
• Basic knowledge on ISO 9001.
• Knowledge on mechanical drawing, GD&T.
• Knowledge in CAPA / 8D / Root cause analysis
• Able to use basic measuring instruments like caliper, micrometer & profile projector.
• Able to do OGP smart scope program independently.
• Good email communication skills.