Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

NO EXPERIENCE REQUIRED/ TRAINING WILL BE PROVIDED/ CAN WORK WITH FRIENDS

MUST-HAVE

1. Black Safety Shoes
2. Black Pants (Top wear will be provided)

Job Highlights

• Location: East & North West Area
• Working Days: Mon to Fri
• Working Hours: 8.30am to 3.30pm/4.30pm (6-hours depolyment)

Job Scope

• Responsible to carry out daily pest control activities according to operational schedule
• Perform comprehensive checks at the assigned location
• Ensure proper measures are adhere
• Collect water samples for investigative needs
• Document and keep records of inspections and treatments

Job Requirements

• Able to commit at least 2-months
• No experience required as training will be provided
• Candidate who possess Driving License will be an added advantage

The Quality Engineer applies engineering principles and techniques to meet the quality targets and organisational objectives in a manufacturing environment. He/She also assists in analysing manufacturing and quality issues make recommendations for out of control processes.

In addition, the Quality Engineer participates in quality improvement projects in accordance with organisational objectives.

The Quality Engineer is required to have strong communication skills, good teamwork and an analytical mind to perform his/her role well to achieve the desired organisational outcomes.

~ Assist in implementation of improvement projects.
~ Attend to internal or external audits related issues.
~ Collect data for analysis.
~ Enforce practices of good safety culture and good manufacturing practices.
~ Ensure adherence to processes and procedures.
~ Ensure all quality plans are properly documented and maintained.
~ Ensure no expired tools running in the production line.
~ Facilitate the implementation of quality system in the organisation.
~ Identify opportunity for continuous improvement projects.
~ Implement calibration cost reduction activities.
~ Interpret information provided by the network/dashboard for quality performance monitoring.
~ Maintain production yield targets.
~ Monitoring quality control and assurance processes.
~ Perform evaluation/experiments.
~ Supervise manufacturing work for workplace safety and health compliance.

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

Role summary
As a Software QA Associate, first, you should understand the art of being human.
You will be responsible for assisting in the plan & execution of our software quality assurance process, ensuring that our products meet the highest standards of reliability, usability, and performance. You will be working closely with development, product, and QA team members to test, identify, and help resolve software issues.

Job Description:

• Understand business functions and analyse user requirements
• Identify the scope of project, requirements and build consensus with all business stakeholders
• Analysis, scoping of data, functional requirement & specification, application design and obtain user requirements
• Plan, prepare and develop test cases
• Execute testing on digital product (web application)
• Conduct UAT and support functional testing
• Prepare all necessary document & checklist to facilitate and deliver the project

Requirements:

• Education: Diploma or Bachelor's degree in Business, Information Technology or a related field (or equivalent practical experience).
• Eagerness to Learn: Motivated to develop skills in software QA, with a willingness to adapt and grow in a fast-paced environment.
• User Centric: Sensitive to user behavior, user flow for digital products (Web apps)
• Attention to Detail: Sensitive to the use case and able to spot anomalies, with a proactive approach to identifying potential issues.
• Communication Skills: Ability communicate with internal and external; ability to clearly document and explain issues in detail, with effective communication skills for collaboration (team player).
• Technical Skills: Basic understanding of software development and testing processes.

Preferred but Not Required:

• Being human
• Knowledge of automated testing tools (e.g., Selenium, Appium, Postman) is a plus.
• Familiarity with Agile or Scrum methodologies.

• Read and interpret engineering drawings to identify dimensions, tolerances, and other specifications.
• Perform quality checks using measuring tools and gauges to ensure components and assemblies meet the required specifications.
• Visually inspect camera assemblies at various stages of production, following defined quality control procedures and checklists.
• Operate test equipment to verify functionality of cameras, following work instructions.
• Identify and document any defects or non-conformities, recording detailed information for corrective action.
• Work collaboratively with production personnel to identify and resolve quality issues.
• Maintain accurate inspection records in Excel spreadsheet and complete necessary paperwork.
• Assist with the implementation of quality improvement initiatives.
• Assist Production Team with assembly or rework of cameras when needs arise.

Requirements

• Minimum Diploma holder
• Salary will depend on relvant experiences and qualification

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• To understand quality requirements and standards and verify conformance in production line.
• To analyse audit findings to minimise process non-conformances in the production line.
• To accurately record and communicate observations from audit/inspection to affected parties and team.
• To inspect sub-assemblies and finished product, both visually and functionally.
• To work in factory environment, which will involve walking around with appropriate attire and safety PPE.
• To observe required factory and safety rules, when performing daily duties.
• To provide accurate reports to engineers and managers on a timely basis.
• To provide suggestions for improvements or highlight challenges encountered.

• Minimum ITE certification with at least 1 year of experience.
• Proficient in Microsoft Excel, Word, PowerPoint, and Outlook.
• Able to work independently with minimal supervision.
• Willing to learn new skills, with passion for quality.
• Troubleshooting skill knowledge will be an advantage.

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the electrical team for project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• In depth of understanding for electrical power automation for electrification of WtE project.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project
• Familiar with SS638 requirements on electrical installations in Singapore.
• Having multi-discipline coordination attitude in execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site meetings with technical discussion contractor and client
• Joining site inspection for contractors works.
• Participation of FAT and SAT of electrical equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities

Job Requirements:

• Review of DCS / PLC system configuration, topology and controller, RIO engineering deliverables for the implementation of WTE automation systems
• Review the submittals from Contractors for Process Control like STG package, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, EMIS, PFMS, Communication Network Infrastructure etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment DCS, EMIS, PMS, PLC, Weighbridge systems etc
• Provide Technical support in Testing and Commissioning of WTE plant

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Ensure appointed MV VCD and MV motor suppliers supply equipment that meets project specificatiions.
• Ensure appointed LV MCC panel suppliers supply electrical panel (MSS with DOL, soft-starter, 2 speed, LV VSD starters and control circuit of motor starter) that meets project specification.
• To coordinate with different stakeholders subcon, suppliers, main con and consultant with regard for detail design development of the LV MCC, MV, VSD and interfacing work between subsystem work package.
• Prepare FAT & SAT test plan for 6.6 kV MV VSD and MV motor.
• Prepare FAT & SAT test plan for LV MCC.
• Update SLD drawings for tie-in to upstream incomers and all downstream ACMV equipment.
• Update Low Voltage cable sizing & short circuit calculation.
• Update actual demand load calculation.
• Prepare discrimination study with all upstream incoming breakers for both MV 6.6kV and LV 400V equipment
• Attend meeting with suppliers, main contractor and consultants to provide reasonable explanation, possible solutions and guidance if they are in doubt.
• Ensure all cable routing with their associated wall openings and / or cable risers are provided for all 6.6kV and 400V ACMV equipment.

Requirements

• At least a Diploma in Engineering majoring in MEP / Electrical or related field.
• Minimum 8 years of working experience. Those with more years of experience will be considered a senior position ie Senior Engineer / Assistant Manager
• Those with Construction Industry (majoring in Electrical Control for ACMV) will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.
• Willingness to work at Tuas area with transportation pickup at designated MRT stations.

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description:

• Assist Resident Engineer in daily close supervision and coordination duties
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Participate in construction interface meeting for Instrumentation, Building Services (ELV) systems
• Checking BIM Model and interface with C&S team for the completeness of site clearance for Instrumentation construction activities
• Review of design deliverables for Instrumentation, Building Services (ELV) and release of IRF’s to contractor as per RE’s instructions
• Update of Daily Site Reports (DSR), maintain quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors on execution of works
• Participate in FAT activities and punch list follow up
• Participate in SAT, Commissioning of Instrumentation, Building services (ELV) activities till the final handover of the project

Job Requirements:

• Diploma in Instrumentation Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project or waste/water management projects in Singapore, particularly Instrumentation, Control, Automation and Building Services (ELV) systems

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

KEY DUTIES AND RESPONSIBILITES:

• Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
• Preparation of reagents/diluents/ dissolution media as per STP.
• Perform various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
• Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
• Ensure implementation of SOP for all corresponding activities.
• Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
• Ensure real time documentation, maintain data integrity and appropriate traceability.
• Assist in maintenance and calibration of test instruments per specifications.
• Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
• Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
• Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
• Responsible for QC lab and equipment/instrument cleanliness.
• Responsible for procuring and receipt of QC lab glassware and consumables.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Possess working knowledge of GMP in the pharmaceutical industry.
• A good team player with a positive learning attitude.
• Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• EDUCATION & EXPERIENCE
• Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).
• (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.
• (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.

Workplace address:

67 Beach Road #02-01/02 Bulkhaul House, Singapore 189688

Job Responsibilities:

1.Assist management in reviewing internal control processes and implementation for improvements per group policies and procedures adherence.

2.Assist management in establishing new processes and safeguards in driving best practices and system implementation when required.

3.Prepare documents for internal audit per Head Office requirement and support the process such as providing samples (signed contracts, full set of whole cycple operation documents adhering to internal controls)

4.Liase with other departments/subsidiaries as well as Head Office to provide financial figures required in various standard and ad hoc reports.

5.Review and assist to manage all accounting aspects, preparation of month end financial reports.

6.Perform other job-related duties as assigned.

Job Requirement:

1.At least 3 years related working experience, audit background is preferred but not compulsory;

2.Bachelor degree holder or above;

3.Candidate with Singapore CA, ACCA or other qualification body member is preferred;

4.Excellent written and verbal communication skills;

5.Proficient in using Microsoft Office Apps, candidate with VBA skills is preferred.

To apply online please click on the APPLY NOW button, or email your resume to [email protected]

We regret only shortlisted candidates will be notified.

Need to know Zeiss CMM Program

Need to know Zeiss CMM Operation

Have Quality Assurance & Quality Control knowledge.

Know incoming / Inproess / external provider parts inspection.

Know prepare of quality documentation and maintenance documents like daily monitoring Data and monthly Data performance.

Will prepare of documentation for customer audit & ISO audit

Company Overview:

Traveloka is a leading technology company that provides a one-stop travel and lifestyle platform for customers in Southeast Asia. Our platform offers a wide range of travel-related services, including flight and hotel bookings, activities, attractions, and more. With a mission to empower travelers with seamless experiences, we're committed to pushing the boundaries of technology and innovation in the travel industry.

It's fun to work in a company where people truly BELIEVE in what they're doing!

Job Description：

As an Internal Control Manager under the guidance of the Head of Internal Control, the person will play a pivotal role in managing Internal Control (IC) programs including execution of SOX Compliance project, Control Change Management and working with other risk functions to foster a culture of continuous improvement in control environments across the organization. The person is expected to support external audit process on behalf of management and continuously monitor financial controls development and certification via SOX GRC Tool.

Key Responsibilities may include, but are not limited to the following (other duties may be assigned):

Advocate for strong financial control governance across the organization, ensuring alignment with ICFR policies and procedures.

• Perform the SOX compliance fieldwork assessing the adequacy of existing controls, identifying potential design gaps, and working with Process Owners in Charge (PICs) to develop remediation.
• Manage IC’s Change Management program to ensure the timely identification and mitigation of financial risks in partnership with the risk management team (ERM, GRC, IA, etc.).
• Design effective SOX training program and deliver periodic executions across organizations.
• Act as the primary administrator for the SOX Risk and Control Tool, enhancing its use among PICs and assisting in the effective management of SOX control development.
• Drive continuous improvement with industrial best practices for control environment which includes optimization and automation of processes and controls.
• Ensure comprehensive and periodic review of SOX documentation, including Flow Charts, Narratives, and Risk Control Matrices, and maintain robust engagement with PICs.
• Work with cross-functional teams in root cause analysis for fraud or unusual activities that have an impact to financial statement and implement action plans to strengthen controls.

Requirements

• Bachelor’s degree in accounting or finance.
• A minimum of 8 years of experience in auditing or internal control roles, with at least 5 years in public accounting (Big 4 experience required).
• Certifications such as Certified Internal Auditor (CIA), Certified Public Accountant (CPA), or similar are highly desirable.
• In-depth understanding of internal control concepts, SOX, and COSO frameworks.
• Exceptional ability to work collaboratively with multidisciplinary teams.
• Strong analytical, problem-solving, and decision-making skills.
• High attention to detail and commitment to high standards of quality.
• Excellent verbal and written communication skills for effective interactions with both internal and external parties.

If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!