Reading and interpreting technical blueprints and design models.

Loading raw materials into the CNC machine.

Inputting the product design into the computer modeling software.

Choosing and loading the correct cutting tools for the job.

Adjusting machine settings to the desired product specifications.

Troubleshooting issues during the manufacturing process.

Completing quality control tests during the manufacturing stage and on the finalproduct.

Cleaning and maintaining the machine.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Develop, implement and promote occupational health programmes as well as provide recommendations on protective measures to control health risks and exposure to occupational health hazards
• Develop and implement safety related systems/procedures/initiatives to meet HSEQ policy guidelines and statutory requirements
• Recommend improvements to existing OS&H policies and procedures as well as coordinate resolution of implementation problems in order to enhance refinery HSE performance
• Perform HSE/ISO/SMS internal audit and participate in periodical inspections to verify compliance to rules & regulations and identify areas for enhancing safety performance
• Conduct training for staff & contractors on HSE matters as well as implement promotional programmes where required to raise awareness on new or changes in HSE-related procedures
• Advise on major accident hazards and provide guidance on corrective and preventive measures

• Degree/Diploma in Engineering, Chemistry, HSE or equivalent with formal competency certification by recognized authority to practice industrial hygiene independently
• At least 3 years' (Degree holder) OR 5 years' (Diploma holder) HSE experience, preferably in the Oil/Petrochemical industry
• Occupational Health/Safety Officer Training Course or equivalent certification will be an advantage

The Air Traffic Subject Matter Expert (SME) will provide expert guidance and advisory services on air traffic management (ATM), safety protocols, and operational procedures within controlled airspace. This role focuses on enhancing the efficiency, safety, and coordination of aircraft movements, while supporting training, innovation, and collaborative initiatives in the aviation sector. The SME will leverage extensive experience in air traffic control (ATC) to drive improvements in operational performance, regulatory compliance, and crisis management strategies.

Key Responsibilities:

• Provide expert consultation on ATC strategies and processes to ensure safe and efficient aircraft movements within controlled airspace.
• Collaborate with air traffic management teams, safety officers, and regulatory bodies to refine operational procedures and communication protocols.
• Lead training and mentorship programs for new and experienced research staff, utilizing real-world examples to promote high safety and performance standards.
• Advise on integrating technological advancements, such as air traffic control systems (e.g., LORADS 3), to enhance operational capabilities and minimize delays.
• Participate in audits, inspections, and reviews of ATM operations, ensuring adherence to safety regulations and operational excellence.
• Support innovation projects aimed at improving the efficiency and sustainability of airspace management.

Job Requirements:

• License: Air Traffic Controller license (past or current).
• Experience: At least 20 years of experience in air traffic control, including operational oversight and emergency procedures.
• Skills:
  Strong understanding of ATC operations, aircraft movement, and safety protocols.
  Excellent training and mentorship capabilities.
  Proficient in Microsoft Office applications.
  Detail-oriented with strong organizational and multitasking skills, focused on operational excellence and safety.

We regret that only shortlisted candidates will be notified.

RESPONSIBILITIES:

• To advise management on relevant Acts & Legislation pertaining to environmental and health
• Monitor to air, water (ECM) noise pollution, waste management and vector control issues
• Liaise with license pest operator or agent
• To monitor noise readings and advise management accordingly
• To conduct regular site inspection, particularly on ECM, perimeter drainage system, silt facilities, poor housekeeping that will encourage pest breeding, workers living and cooking condition, sanitary facilities etc.
• Together with health supervisor to discuss findings & recommend measures to the occupier to correct non-compliances and verification of action taken
• Prepare fortnightly report to management on Environmental control
• To act according to what is stipulated in the company’s environmental programme, conduct review and make recommendation for improvements
• Conduct investigation on industrial diseases, pest infested area and implement measure to stop its spread & prevent recurrence
• To liaise with relevant authorities on environmental & health issues
• Implementation of departmental procedures to comply with ISO 9001; 14001; OHSAS 18001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Any other related duties assigned by superior from time to time

Requirement:

• Must be registered with NEA

Job Description:

• Monitor and verify that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitor and verify that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Conduct surveillance, monthly inspections and detailed audits.
• Compile and complete checklists in order to aid the surveillance and inspection requirements.
• Keep records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommend the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Prepare and submit a Site Environmental Control Programme and Site Environmental Control Reports to the Occupier of the construction site.
• Identify environmental issues and recommend measures to rectify the irregularities.
• Prepare and submit a Site Environmental Control Report to the Occupier of the construction site.
• Assist the authorities to investigate environmental issues.
• Organise campaigns, training courses and other activities to develop and sustain the interest of workers in maintaining good environmental health standards.
• Any other duties /responsibilities as assigned by the Reporting Manager.

Job Requirement:

• Registered with National Environment Agency (NEA).
• Good knowledge of ECO Scheme and Environmental Laws.
• At least 5 years relevant working experience in construction industry; particularly civil works or in LTA project, or similar scale, complexity and nature of work will be advantages.
• Familiar with Occupational Health & Safety Management System.
• Good team player and able to work independently with positive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

PRINCIPAL ACCOUNTABILITIES

SQP oversees critical and non critical supplier mainly mechanical parts in. SQP is responsible in leading before and after FAS (First Article Submission) qualify and monitor quality performance of new / existing suppliers and ensure uninterrupted supplies of materials and services. He/ She should be able to foster close relationships with suppliers and partners and be able to communicate their value to the company.

JOB RESPONSIBILITIES

1. Lead and Drive First Article Submission for new and existing supplier

Supplier Quality Professional develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier. Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI. SQP shall work with Sourcing and Engineering, to engage and educate suppliers/sub-contractors.

2. Lead quality performance review

Worked closely with suppliers, to monitor conduct audit for vendor performance. Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers. Guide Procurement and team for supplier performance review process.

3. Supplier Development.

SQP shall drive for vendor development, identify and develop new special process to meet turnkey objective and reduce leadtime of supplier.

4. Analyse supply market.

SQP shall propose and execute creative ways to improve supplier process which creates financial value to the organization.

5. Maintain good relationship with stake holders and customer/s

SQP maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality. Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.

6. Develop Product Quality Control Plan

SQP shall also be in charge in developing Quality Control Plan according to the requirements of the customer. He/She shall ensure that required processes and documentations and surveillance points are identified in the QCP. He/She shall liase closely with the customer during development of the new QCP and revision of the existing QCP and its approval (internal and Customer).

7. Customer /Third Party Inspection coordinator

SQP shall manage Customer and Third Party inspection of products/parts. He/She shall ensure that each Quality Control Plan activity which requires surveillance points are monitored and conducted accordingly. He/She will liase and communicate closely with the internal and external customers to ensure that TPI inspections are executed according to the plan schedule.

8. Perform any ad-hoc duties as and when assigned by the superior.

9. All employee of Completion Products Pte Ltd shall observe the highest standards of ethics and integrity in undertaking purchasing activity and act in a honest and professional manner that supports the standing of Completion Products Pte Lts core value.

10. Ensures 5S is implemented in the work area.

11. Adheres company’s guidelines with regards to Safety and Quality.

12. Complies to Company Code of Business Conduct.

13. Support and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments

3. Decision Quality – making good and timely decisions that keep the organization moving forward. Good decisions that are a mixture of analysis, wisdom, experience and judgement.

4. Customer focus – Building strong customer relationships and delivering customer-centric solutions.

5. Drives Result – consistently achieving results, even under tough circumstances. Results might be quantifiable – measured in terms in P&L, sales growth, customer satisfaction ratings, new product launched. Qualitative result -- an enhanced reputation among customers, a more vibrant brand that attracts customer and employee talent.

QUALIFICATION GUIDE

1. Education : Minimum Degree in Technical/Engineering course preferably Mechanical

Engineering

2. Communication : Fluent both in oral and wriiten English communication

3. Experience : Minimum 5 years of working on the same field . Experience in Oil and Gas

manufacturing is an advantage.

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently offer the following position in our office in Singapore which will be on site.

Quality Systems Engineer

This role is responsible for management of document changes, QMS training, engineering changes, records archiving and overall support in maintenance of the existing Quality Management System (QMS). Also responsible for overall administrative coordination of document and training system.

Your Responsibilities

• Support the Global QMS team in ensuring the conformity of QMS to established applicable standards and regulations, conduct internal audits and participate in external audits to verify effectiveness, and drive Quality Systems and compliance training to raise awareness towards Good Manufacturing Practices (GMP) and Good Documentation Practices (GDP).
• Maintain Document Management System (DMS) and Training Management System (TMS), execute document changes and revision controls, maintain compliance of engineering changes and supporting documentation, including execution of QMS-related changes (e.g., BOM changes, Process Documentation release), and create and coordinate training plans in TMS, ensuring training timeliness.
• Ensure archival records are easily retrieved and properly maintained, identified and traceable, update and maintain master list/log sheet of quality records, and coordinate and maintain Quality Records archival and retrieval from Document Management Centre.
• Drive Quality Systems and compliance training to raise awareness towards Good Manufacturing Practices (GMP) and Good Documentation Practices (GDP), create and coordinate training plans in TMS, ensuring training timeliness, and represent RAQA Department in ad-hoc committees and cross functional projects.
• Adhere to company EHS requirements, regulations and risk assessments and take adequate control measures in preventing injuries to themselves and others, and represent RAQA Department in ad-hoc committees and cross functional projects.

Your Profile

• Educational Background: Degree in a relevant field such as Quality Management, Engineering, Life Sciences, or a related discipline; diploma holders with equivalent experiences will also be considered.
• QMS Experience: Proven experience in maintaining and auditing QMS to ensure compliance with applicable standards and regulations.
• Document Management System Experience: Experience in managing Document Management Systems and Training Management Systems, including executing document changes and coordinating training plans, with familiarity in computerized systems (e.g., Trackwise, Windchill) being advantageous.
• Applicable Standards and Regulations Knowledge: Strong understanding of Good Manufacturing Practices (GMP) and Good Documentation Practices (GDP), with preferred knowledge in ISO13485, USFDA QSR, cGMP (21 CFR Part 820), and MDSAP.
• Communication Skills: Excellent communication skills to work closely with colleagues across departments and represent the RAQA Department in ad-hoc committees and cross-functional projects.\

What We Offer

• Equal pay is a given for us.
• Learn all there is about Kaizen, PSP's and Muda as part of our Danaher Business System (DBS) trainings - if you believe in continuous improvement like us
• We have no room for prejudices and stereotypes. We promote equal opportunities, diversity and inclusion.
• We offer a balance between support and autonomy to achieve your own goals in an international environment.

Get More Insight

Learn more about what we do and who we are by watching our company video “We Are Leica”: https://www.youtube.com/watch?v=1zHmalqMXN4

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

Job Info:

• Salary: Basic up to $3600 + VB
• Working Hours: Monday - Friday (8:30am - 5:30am)
• Location: Newton

Job Scope:

• Making collection calls to customers
• Ensuring timely and effective collection of all outstanding debts and customer payments
• Negotiating re-payment plans with customers
• Coordinating with legal counsel to follow up on legal actions against delinquent payers
• Working with vehicle repossession agents to track repossessed vehicles
• Maintaining regular contact with clients to clear outstanding balances
• Resolving internal and external queries related to customers’ outstanding balances
• Posting and allocating daily receipts into the accounting system
• Performing other ad-hoc administrative tasks as required

Requirements:

• Experience in going through the whole cycle of legal process of debt collection
• Ability to advise on what legal action is best at different stages of debt collection
• Ability to establish and maintain good client relationships, both internally and externally at all levels
• Ability to reconcile complex accounts and have excellent attention to detail
• Calm, confident manner to handle potentially uncomfortable conversations
• Diploma / Degree, At least 2 years relevant experiencePlease submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Responsibilities

• Responsible for preparing technical and commercial, proposal according to customers' requirements.
• Provide a cost analysis for various solutions.
• Using technical skills to demonstrate to potential customers the benefits of the system and how it may sut the customer better thancompeting solutions.
• Sourcing and negotiate of components, parts for alternatives, cost effective when required.
• Participate in training, site inspection as assigned.
• Other ad-hoc duties as assigned.

Job Qualifications

• Diploma or Degree in Electrical/ Mechanical Engineering or with at least 1 year relevant working experienced.
• Basic knowledge of PLC, SCADA, and OPC.
• Able to read and interpret E&I drawingsand technical specifications.
• Strong analytical and problem solving skills.
• Good team player who can work independently and also cross-departmental.
• Able to work under pressure.
• Familiar with MS Office and AutoCAD.

Responsibilities

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and report on project status
• Prepare project budget and cost estimation
• Co-ordination of hookup and monitor of tools installations schedule
• Manage, control and monitor all project activities such as design, testing and commissioning of project

Competency Requirements

• Diploma or Degree in Electrical/Mechatronic/Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Job Description

• Expand into new markets.
• Manage sales and agents.
• Reach out to ship owners to include our offerings on their market list.
• Provide technical support to address inquiries from ships and vessels regarding Nordic Systems.
• Maintain strong customer relationship with the Company.
• Review customer technical specifications and collaborate with the Application team for bidding.
• Monitor and follow up on all submitted quotes.
• Open new Sales account.
• Identify and recruit suitable new sales agents.
• Develop and implement sales strategies to achieve sales targets.
• Issue and monitor Owner's benefits.
• Continuously seek out sales opportunities.
• Present the Company's products and services to potential customers.

Job Requirement

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.
• Prior experience in the Maritime, Oil & Gas industries and shipyards is highly advantageous.
• Excellent verbal and written communication skills are essential.
• Strong interpersonal skills with the ability to collaborate effectively.
• Responsible, Meticulous, and able to thrive under pressure.
• Proficient with Microsoft Office Applications (Outlook, Word, Excel, Power Point, etc).
• Experienced in PLC/SCADA systems is preferred.
• Fluency in English (verbal and written) is essential.

Job Description:

• Assist in implementing, updating, and maintaining certified quality management systems (ISO 22000, HACCP, Halal and MSC certification) in coordination with third-party certification bodies.
• Conduct quality control checks for incoming raw materials, in-process products, and finished goods to ensure compliance with internal and external standards.
• Support production operations by troubleshooting quality issues and ensuring products meet required specifications before, during, and after production.
• Coordinate QC sample shipments and testing with external laboratories, ensuring timely and accurate testing processes.
• Serve as the QC document controller, ensuring proper coordination and alignment with QA document control systems.
• Liaise with government agencies and certification bodies regarding product registrations and certifications.
• Monitor and implement corrective actions based on inspection findings, working with suppliers and internal teams to resolve issues effectively.
• Conduct periodic food safety and hygiene inspections, providing training where needed to ensure compliance with regulatory and internal standards.
• Assist with procurement operations for consumables, including maintaining approved supplier lists, tracking pricing, and managing delivery timelines.

Requirement:

• WSQ Certification in Food Hygiene and Halal Certification is a must.
• Minimum of 10 years of QA/QC experience, preferably in the frozen food manufacturing sector.
• In-depth knowledge of food safety regulations and quality control standards (HACCP, GMP, ISO standards).
• Familiarity with sensory evaluation techniques and microbiological testing.
• Physically fit to work and experience in cold room environments.
• Strong sense of responsibility, punctuality, and a positive working attitude. Able to thrive in a fast-paced environment with minimal supervision.
• Effective communication in both English and Mandarin to collaborate effectively with Mandarin/English-speaking cross-functional teams and external stakeholders.
• Flexibility to perform overtime (OT) when required, especially during last-minute requests to meet operational needs.

Job Highlights

• Job Types: Contract, Permanent
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, Sat 7.45 am to 11.45 am, alternate Sat
• Great learning development opportunities.
• Work-Life Balance and positive/friendly working environment.

(Only shortlisted candidates will be notified)

1) Have Quality Assurance & Quality Control knowledge.

2) know how to use CMM

3) Know and prepare of quality dicumentation and mainteance documents like daily monitoring Data and monthly Data performance.

4) Will prepare documentation for customer audit & ISO Audit

5) Have responsilbility for the job

As a Quality Engineer, you will be responsible for ensuring the quality of our products and procedures in compliance with established standards, address quality issues, drive continuous improvement, and contribute to building high-quality products that exceed customer expectations.

Job Responsibilities

• Conduct assessment and review on supplier qualification, performance and process capability.
• Ensure supplier quality issues are dealt with, analyzed, improved and follow through.
• Interact with customer on product quality. Handle and follow-up to address customer feedback/complaints.
• Support internal, external and customer audits.
• Evaluation, verification and validation of new parts/samples.
• Establish and maintain inspection criteria for incoming, in-process and final products.
• Identify quality issues, NCR, CAPA handling and drive continuous improvement.
• Authorize the release of products (COC), COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control

Job requirements

• Bachelor's degree in relevant field with 3-5 years experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools
• Strong analytical and problem-solving capability

Job Info:

• Salary: Basic up to $5200 + AWS + VB
• Working Hours: Monday - Friday (9am - 6pm), Alt Saturday (9am - 1pm)
• Location: Boon Lay

Job Scope:

• Provide support to functional departments in ensuring food quality and safety during daily operations
• Plan, organize, and coordinate to ensure the QA Department runs efficiently on a daily basis
• Align with the company’s business objectives and collaborate with department leads to adjust responsibilities in line with GM’s strategic plans
• Prepare monthly reports, such as Complaint Log, HACCP Objectives Summary, Demerit Point System Records, and GMP audits, for submission to management
• Gather and analyze data for trend analysis on non-conformities and improvement initiatives
• Plan lab testing based on FG sensitivity levels to manage department expenses and stay within budget
• Participate in and support quality system implementations, including audits by government agencies, certification bodies, and customers
• Collaborate with all functional departments on process improvements, standards, and procedures documentation
• Lead short-term projects, initiatives, or training programs and ensure timely completion
• Report non-conformance issues related to food quality or safety to the relevant coach
• Perform additional projects as assigned

Requirements:

• Minimum 5 years experience working in the Food industry and possess good knowledge of manufacturing processes
• Proven track record in leading the set-up and implementation of ISO22K or higher standards in the food manufacturing industry will be an added advantage
• Possess knowledge of international standards i.e. FSSC22K, GFSI
• Min. Degree/Diploma in Food related discipline, Food Science or Food Technology

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Quality Inspector (Jurong East)

base salary + OT pay + 1 month AWS + company shuttle bus

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

Job Summary:

• Basic: $3000-$4000 (based on exp)
• Working timing: 5.25 days (Alt Sat), 8.45 am-5.45pm
• Meal provided
• Performance Bonus
• Location: Bishan

Job Description:

• Monitor payments, follow up with defaulting hirers, and handle vehicle repossession and disposal.
• Coordinate with lawyers for legal actions and manage tender auctions.
• Address customer inquiries on repossessed vehicles.
• Oversee recovery of shortfalls after vehicle sales.

Job Requirements:

• Min 2 years of credit control experience.
• Open to candidates who are interested in the automotive industry.

Interested Applicants, kindly send your updated CV to +65 8500 3939 or click on “APPLY NOW”.

We regret that only shortlisted candidates will be notified

EA Personnel Name: Chin Jia Hui, Janice
EA Personnel No: R22107485
EA License No: 15C7752

Your Job

The primary purpose of your role is to work closely with the Product Development team to develop and maintain a Quality Plan. This plan is crucial in managing and mitigating project risks to ensure a flawless product launch that meets the customer's cost, quality, and delivery requirements.

Our Team

You will be reporting to the AQP Manager.
Internal: Product Design Engineers, Manufacturing / Process / Tooling Engineers, Project Management, Manufacturing Plants, Product Management & Sales / Marketing

External: Customers, Suppliers

What You Will Do

• Quality Plan Development: Ensures the project Quality Plan for new products and product modifications are focused on the voice of customer and all project quality deliverables are completed in a timely manner.
• Risk Analysis: Facilitation during front-end product / tool / assembly design or process reviews, design & process FMEA reviews by providing inputs on internal and external quality history, lessons learned and through active critical thinking / questioning. Reviews and approved reliability test plan.
• Metrology / Qualification of New / Modified Parts: Facilitate the development of measurement plans / methods and lead the disposition of new products at FOT (First Off Tool) and Qualification. Ownership of gauges & necessary inspection fixtures, perform Measurement System Analysis, Capability Studies & any necessary statistical analysis with goal of Tool / Process Qualification.
• Flawless Launch: Work with Manufacturing AQP or QE to conduct Safe Launch exercise. Perform process audits and reverse (go & see) FMEA’s to qualify new production processes, and to ensure compliance to documented control plans for new products.
• Customer Approval: Ensures customer required documentation relating to customer acceptance of new products and product modifications are completed.
• Supplier Approval: Reviews and approves supplier product specific documentation on new and modified purchased components. Works with supplier quality engineer to ensure compliance.
• Problem Solver: Lead in the problem solving (8D’s), analysis, and resolution of new product related customer complaints or internal quality complaints during launch. Support efforts for prevention of repeat issues & systemic improvements to the Product Development Processes to reduce New Products QNs.
• Principle Based Management & Quality Systems: Understand & practice the KOCH 5 dimensions & guiding principles, Lean / Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Perform other related duties as assigned by management.

Who You Are (Basic Qualifications)

• BS Degree in Engineering or other related field
• Experience in Quality Engineering or Automotive related field
• Strong organizational skill to anticipate, plan, organize and self-monitor workload
• Good communication skill and presentation skill
• Good interpersonal skills for effective leadership and team facilitation
• Solid Knowledge & understanding of metrology and GD&T
• Knowledge of statistics - experience using Minitab or other software
• Experience in using MS Office (Excel, Word, Power Point)
• Able to travel (domestic and international) 20%

What Will Put You Ahead

• Training in Capability Analysis (CPK) , SPC, AIAG VDA FMEA, Lean / Six Sigma, reliability test plans , VDA19 , VDA5
• Experience in Quality engineering in a new-product introduction environment
• Experience performing PFMEA/DFMEA and using other Advanced Quality Planning tool
• Experience working as customer interface (including Automotive OEMs and Tier1/2 suppliers)
• Working knowledge of testing, molding, stamping, plating and assembly processes
• Good knowledge of IATF 16949, VDA 6.3, AIAG core tools (APQP, PPAP, FMEA, MSA, SPC)
• Quality System (ISO 9001 or IATF 16949) and Supplier Auditing experience, Gage and Fixture design
• Knowledge of VDA 5, VDA19 , AIAG-VDA FMEA
• Experience working with European automotive customers

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

1. Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
2. Preparation of reagents/diluents/ dissolution media as per STP.
3. Perform a various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
4. Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
5. Ensure implementation of SOP for all corresponding activities.
6. Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
7. Ensure real time documentation, maintain data integrity and appropriate traceability.
8. Assist in maintenance and calibration of test instruments per specifications.
9. Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
10. Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
11. Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
12. Responsible for QC lab and equipment/instrument cleanliness.
13. Responsible for procuring and receipt of QC lab glassware and consumables.
14. Any other activities as and when assigned by the Superior.

KEY DUTIES AND RESPONSIBILITES:

• Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
• Preparation of reagents/diluents/ dissolution media as per STP.
• Perform various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
• Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
• Ensure implementation of SOP for all corresponding activities.
• Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
• Ensure real time documentation, maintain data integrity and appropriate traceability.
• Assist in maintenance and calibration of test instruments per specifications.
• Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
• Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
• Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
• Responsible for QC lab and equipment/instrument cleanliness.
• Responsible for procuring and receipt of QC lab glassware and consumables.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Possess working knowledge of GMP in the pharmaceutical industry.
• A good team player with a positive learning attitude.
• Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• EDUCATION & EXPERIENCE
• Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).
• (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.
• (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

About Us:

JSTT Singapore Pte Ltd is a leading producer of high-quality sushi and sashimi, providing fresh and delicious products to supermarket counters across [specific regions]. Committed to excellence, we are seeking a skilled and dedicated professional to join our team as a Food Safety and Quality Assurance Officer.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 and FSSC regulations in our central kitchen and 20 supermarket counters. Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000 and FSSC standards.
• Conduct regular audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and recalls.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000 / FSSC standards.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

To maintain the operational capability of the incineration plant such as performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery. Performing daily inspection on equipment to look out for anomalies and having good documentation on various records and reports for the maintenance operation. Candidate shall be equipped with the ability to understand system schematics and drawings.

Maintenance

· Ensure the plant day-to-day operation is functional at its optimum level.

· Assist the E&I Engineer and lead a team of skilled worker in the maintenance and expeditious repair of the plant’s equipment.

· Handling distributed control system and instruments in the plant and perform daily inspection on equipment.

· Performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery

· Analyze breakdowns, diagnose faults, and execute the required rectification process.

· Take part in plant overhaul activities.

· Ensure close coordination with various parties for maintenance activities.

· To ensure that equipment maintenance & service procedures and programs are effectively implemented consistent with sound engineering practices.

· Ability to understand system schematics and drawings.

· Assist the engineer in any other duties as required.

Requirements

· Minimum Diploma in Electrical Engineering or equivalent.

· Technical Skills and Knowledge on Instruments and Controls Equipment in Waste To Energy Plant

· Minimum 2 years’ experience in Waste to Energy Plant. Fresh graduates are welcome to apply too.

· Medically fit.

· Proficient with Microsoft Word, Excel and PowerPoint.

· Able to work 5 days a week and if required, including public holidays and weekends.

· Extended working hours might be required if urgent work needs to be done to machinery or plant.

· Shift work is not required.

· Team player that is proactive and able to work under pressure.

· Maintaining a positive outlook in the event of adverse condition.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.