• Reports to the Safety Manager
• Liaise closely with authorities
• Familiar with local law and regulations
• Take charge and handle public feedback
• In charge of all environmental control programs and lead the environmental team
• Maintain proper documentation i.e. Site environmental Report, daily environmental inspection report etc.
• Conducting environmental workshops and training for the project
• In charge of pre-project planning and advice on the measures to take in areas on noise/water/air pollution control, waste/pest infestation control, and public/neighbors’ engagement and management

Job Requirements:

• A Registered ECO with NEA
• A Registered ECMO with IES
• Attained Specialist Diploma in WSH or equivalent
• Minimum 3 years’ post-registration experience as ECO for LTA projects
• Experience in civil works (road and viaduct) & ASAC awards preferred
• Proficient in GGBS requirements/implementation and ISO14001:2015 standards
• Proficient with MS Office
• Location: Woodlands
• Project: Infrastructure, Viaducts

Basic Functions:

• Assist in maintaining company’s compliance to quality management system established.
• Responsible in monitoring the calibration and maintenance program.
• Ensure that ISO 13485, In-vitro Diagnostics Directive 98/79/EC, IVDR 2017/746 and 21 CFR Part 820 Quality System Requirement, MDSAP (Medical device Single Audit Program) are properly implemented and maintained at all levels.
• Establish and maintain proper document archiving and control system.

Duties:

• Assist in maintaining company’s compliance to quality management system established.
• Assists in internal and external audits.
• Responsible in handling the corrective and preventive action system and its sub-system (i.e. Nonconforming product and internal audit).
• Ensure that proper document control procedure and system is implemented for Product Specifications, Operation Manuals, Standards, Drawings and all quality related documents.
• Control and compile Production / QC Master Batch Records and ensure that the Quality Records Master List is updated. Together with the Documentation Center, ensure that all documents submitted and/or generated are archived.
• Co-ordinate, review, collate, update and issue all quality-related documents to relevant personnel.
• Prepare necessary documentation (e.g. Certificate of Analysis and Certificates of Origin) to support shipment of products overseas.
• Control and compile Production / QC Master Batch Records and ensure that the Quality Records Master List is updated. Ensure that all documents submitted and/or generated are archived.
• Receive Production / QC Records and all quality related documents and ensure that proper document archiving and control system is implemented.
• Ensure that all documents submitted and/or generated are archived.
• Compile and ensure that the Quality Records Master List is updated.
• Perform other duties as assigned.
• Support the projects of material qualification
• Any other duties as and when assigned.

Minimum qualification Requirements

Ability to:

• Demonstrate the use of all equipment, materials, and techniques relevant to job performance, execute and maintain pertinent validation protocols as required and maintain quality standards.
• Establish quality assurance system and undertake systems / product / process validation

Knowledge of: Various quality control/process control requirements, quality management system and documentation relating to biomedical and /or IVD products. Technical terminology used in the laboratory, assigned scientific techniques and knowledge of QC procedures governing a number or basic laboratory operations.

Education: Basic Science Degree

Experience: No prior working experience is required for Executive position. At least 3 years of relevant working experience for Senior Executive position.

Primary Function

1. Manage technical projects to explore, develop new formulations and applications for use in either food, beverages, nutraceuticals, pharmaceutical and nutritional applications.
2. Involved in formulations and leading towards production. Develop new formulations and testing protocols and improve formulations and outputs excellence.
3. Build relevant formulation & application knowledge on the use of sucrose esters in novel product formats (E.g. Formulation mixes in various food applications to cosmetics applications).
4. Source & procuring of raw materials and build up applications intelligence with various ingredients and additives.
5. Hands-on spirit and comfortable in laboratory and actively contribute novel ideas to the R&D efforts.
6. Starting with a regional to global scope and an excellent opportunity to build and develop with global clients across the business.
7. Technical services front facing customers, relating to food applications as well as formulations and role is a growing role in the organization.

Knowledge, Skills and Requirements

1. Minimum a diploma and/or degree in Personal Care / Cosmetics / Pharmaceutical / Food Science / Chemistry. Some insights to pharmaceutical or personal care, cosmetics and perfumery or emulsifiers, will be an advantage.
2. Highly familiar with food ingredients and experience in formulations of ingredients, additives, premixes and emulsions systems, will be added advantage. At least some experience in application related to flavor / color / bioactive ingredients. Exposure to food ingredients / additives sourcing and purchasing experience, will be a plus.
3. High entrepreneur spirit, good project management skills, able to multitask, good team player. Have the drive to develop technical projects into new business opportunities.
4. Strong in IT skills like Microsoft Word, Powerpoint, Excel and at least bilingual in spoken and written in English and Mandarin and/or another language for technical presentation and communication with the customers.
5. A strong drive and self-motivation and ability to learn in a fast pace working environment in the global market and ability to travel and provide technical service when required.

Responsible to monitor the quality of incoming and outgoing products or materials to ensure that the products meet the required standard and sometimes making suggestions to improve quality or efficiency.

- Able to operate and create program for CMM Machine

- Experience in Precision Machining/Engineering Industry

- Minimum of 2 years hands-on exposure in quality inspection of Machined/Painted metal parts

- Knowledge in using measuring instruments preferred

- Proficient in spoken and written English

- Able to work overtime and weekends (if required)

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Highlights

• Permanent Position
• Competitive salary and benefits package
• Opportunity to work on exciting and challenging projects
• Great opportunities for learning & career advancement
• Transport provided at Tuas Crescent MRT

Responsibilities:

• Reviews Client's technical documentation and requirements.
• Defines engineering requirements.
• Prepares the technical documentation for instrumentation and systems requisitions and performs the technical evaluations.
• Provides technical support to Project group.
• Optimizes instrument systems ensuring minimal cost and simplification in compliance with the required performance.
• Prepares specifications for instruments, systems (DCS, ESD, F&G) and installation.
• Prepares functional analysis (control, ESD, F&G).
• Implements instrument detail design on P&ID's.
• Prepares instrument data sheets and loop diagrams.
• instrument hook-up diagrams.
• Implements detail engineering activities (layouts, routings, supports...).
• Performs the F.A.T. & T & C
• Design, develop and implement PLC & SCADA systems.
• Other ad hoc duties as assigned by the Management.

Requirements:

• Bachelor’s Degree in Instrumentation and Controls engineering discipline or equivalent
• 5 years of experience in energy business related engineering management and project management (engineering and construction)
• Experience in power and water utilities as well as renewable energy projects is preferred
• Good knowledge of local services and solutions specializing in treatment of water and wastewater.

Responsibilities

• Plan, supervise and execute projects and tasks based on the objective set by Management.
• Solve and prevent problem occurrence and to increase customer satisfaction on Product Quality.
• Perform quality, env. and water efficiency system maintenance in the company.
• Support in maintaining & upkeep ISO 9001, ISO 14001, IATF1694, ISO 17025 and ISO 13485 and ISO 46001 in the company.
• Understand company’s Quality, Env., Water Efficiency and OH&S Policy and Objectives, Env. aspects and impacts, Safety news, Safety risk assessment, Information Security risks, etc.
• Perform internal QEMS and WEMS audit and coordination with internal dept for external QEMS and WEMS audit, provide support for customer audit and perform vendor audit.
• Monitoring production dept. quality failure cost.
• Perform calibration & maintenance of x-ray machine, ensure good housekeeping of X-ray equipment’s area and update monthly schedule report of x-ray machine.

Requirements

• Minimum 2 years experiences in engineering or quality assurance field.
• Preferably with experience in supplier management and product qualification.
• Strong understanding of automotive 5 core tools (APQP, PPAP, MSA, FMEA, SPC) and good working knowledge of Minitab or JMP application will be added advantage.
• Good knowledge of 8D problem solving tools (Fishbone diagram, 5-Why, etc.) is preferred.

Shift Type / Work Hours

Normal Shift (5 days work week)

7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance and dental coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation

Become part of a cohesive team dedicated to delivering optimised outcomes in the dynamic hydrocarbon market under the refinery robust conditions. We are seeking a Production Control Planner who thrives in a collaborative environment and is keen to make a significant impact to the refinery production and supply chain. Both experienced and fresh graduates are welcome to apply.

Key Responsibilities:

• Coordinate with stakeholders to develop daily production plans and develop Oils Planning strategy for major Turnaround.
• Oversee execution of production plans through close coordination with Operations and stakeholders.
• Collaborate with feedstock and supply teams to ensure timely feedstock discharges and product loadings.
• Maximize refinery HVP (High Value Product) yield through blending optimization.
• Maximise revenue through proactively identifying, evaluating, and implementing optimisation opportunities
• Coordinate with stakeholders to address and resolve quality or plant issues promptly, while ensuring safe operations.
• Identify and address gaps in planning and production processes, and product qualities

Requirements:

• Degree in Chemical Engineering
• At least 3 years’ experience in petrochemical or oil refinery industry. Fresh graduates may be considered, and relevant training will be provided.
• Strong analytical, problem-solving, and inter-personal skills.
• Experience with workflow automation, data visualisation, or scheduling software will be an added advantage

RESPONSIBILITY

-Checking of wood panel and pvc edging under hot environment

-Help in loading and unloading weight about 20kg

-Main job scope is machine production, end the wood panel will sent to your section for quality checking and packing

-Maintain safe and clean working environment by educationg and directiong personnel on the use of all control points, equipment , and resources

-Maintaining compliance with established policies and procedure

-Multitasking

REQUIREMENT

-Able to work overtime in weekend and public holiday

-Hardworking

-Willing to learn

Responsibilities

• Plan, supervise and execute projects and tasks based on the objective set by Management.
• Solve and prevent problem occurrence and to increase customer satisfaction on Product Quality.
• Perform quality, env. and water efficiency system maintenance in the company.
• Support in maintaining & upkeep ISO 9001, ISO 14001, IATF1694, ISO 17025 and ISO 13485 and ISO 46001 in the company.
• Understand company’s Quality, Env., Water Efficiency and OH&S Policy and Objectives, Env. aspects and impacts, Safety news, Safety risk assessment, Information Security risks, etc.
• Perform internal QEMS and WEMS audit and coordination with internal dept for external QEMS and WEMS audit, provide support for customer audit and perform vendor audit.
• Monitoring production dept. quality failure cost.
• Perform calibration & maintenance of x-ray machine, ensure good housekeeping of X-ray equipment’s area and update monthly schedule report of x-ray machine.

Requirements

• Minimum 2 years experiences in engineering or quality assurance field.
• Preferably with experience in supplier management and product qualification.
• Strong understanding of automotive 5 core tools (APQP, PPAP, MSA, FMEA, SPC) and good working knowledge of Minitab or JMP application will be added advantage.
• Good knowledge of 8D problem solving tools (Fishbone diagram, 5-Why, etc.) is preferred.

Shift Type / Work Hours

Normal Shift (5 days work week)

7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance and dental coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation

• To conduct QC inspection and record on all the incoming materials.
• To attend to any complaint from sites.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• To prepare all the Quality-related reports.
• Any other duties instructed by the Manager.

Job Title: Quality Engineer / Assistant Engineer

Salary: Up to $4000

Location: Joo Koon

Working Days: Monday - Friday

Working hour: 7.50am to 4.55pm

Benefits: Company transport provided, Medical insurance, and Dental coverage

Responsibilities

• Plan, supervise and execute projects and tasks based on the objective set by Management.
• Solve and prevent problem occurrence and to increase customer satisfaction on Product Quality.
• Perform quality, env. and water efficiency system maintenance in the company.
• Support in maintaining & upkeep ISO 9001, ISO 14001, IATF1694, ISO 17025 and ISO 13485 and ISO 46001 in the company.
• Understand company’s Quality, Env., Water Efficiency and OH&S Policy and Objectives, Env. aspects and impacts, Safety news, Safety risk assessment, Information Security risks, etc.
• Perform internal QEMS and WEMS audit and coordination with internal dept for external QEMS and WEMS audit, provide support for customer audit and perform vendor audit.
• Monitoring production dept. quality failure cost.
• Perform calibration & maintenance of x-ray machine, ensure good housekeeping of X-ray equipment’s area and update monthly schedule report of x-ray machine.

Requirements

• Minimum 2 years experiences in engineering or quality assurance field.
• Preferably with experience in supplier management and product qualification.
• Strong understanding of automotive 5 core tools (APQP, PPAP, MSA, FMEA, SPC) and good working knowledge of Minitab or JMP application will be added advantages.
• Good knowledge of 8D problem-solving tools (Fishbone diagram, 5-Why, etc.) is preferred.

WONG MENG KANG

Superform Consulting Pte Ltd

R1988500 / 15C7536

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection Eligibility Criteria
• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Main duties and responsibilities:

To support the local team in all QEHS related compliance and performance of TES Singapore sites, which includes but not limited to emergency response (drills and TTX), incident investigation and IH monitoring, etc. Also, includes all Environmental related matters and regulatory reporting, global QEHS procedures & programs and overall lead for all QEHSMS / R2 audits, 3rd party certifications and customer audits as well as supporting Group EHS.

Environment:

• Reporting of QEHS performance metric reporting and activities to Global/ Group EHS Manager.
• Provide guidance on QEHS best practice principles, techniques and culture in Singapore sites.
• Compilation and submission of annual recycling data and other relating environment related info to relevant competent authorities.
• Maintain Basel Permit / Import Approval of all sites, including applications and tracking of movement documents.

Audit:

• Ensure Singapore sites are aware of and complying with Corporate/ Group QEHS policies, standards and programs, and local legislations.
• Program lead for 3rd party (ie. QEHSMS & R2) audits and key customer accounts on QEHS audits, provide resource and preparing Singapore sites with upcoming audits, tracking & reporting of audit results and monitor closure of corrective actions.
• Develop and conduct Singapore sites QEHS Audit program to ensure compliance to EHS regulations and Global EHS standards. Track & report audit results and monitor closure of corrective actions.
• Analyse data from EHS audits (including 3rd party QEHSMS & R2 certification audits and key account QEHS audits) to identify trends and provide feedback and preventative measures.

Other support:

• Support the development & implementation of One TES IMS – global QEHS procedures and programs.
• Monthly tabulation and submission of Basel permits status reporting for Exco meeting.
• Provide coordination and administrative support to QEHSMS & R2 certification program in Singapore.
• Support global initiative programs / activities as assigned.

Job Requirements:

• Diploma / Degree in any Engineering discipline and registered WSHO and FSM.
• Good to have: Qualified industrial first aider, noise monitoring office or any other IH related experience.
• Proficient in English and Mandarin and good report writing skills, familiar with Microsoft office.
• Trained in/ familiar with ISO 14001, ISO 45001, ISO 9001 and Responsible Recycling (R2) or equivalent.
• Experience with handling government agencies and knowledge in license and permit application from agencies such as NEA, MOM, SCDF, PUB and SPF.
• 5-8 years of working experience as in WSH related fields or equivalent in manufacturing / electronic or chemical industries.
• Experience in conducting ISO 9001/ ISO 14001/ ISO 45001/ R2 audits or handling OSH related audits.
• Good communication skills, team player, responsible, take initiatives and work independently without much supervision.

Good to have:

• Registered WSHO & FSM.
• Proficient in English, Mandarin and good report writing skills, familiar with Microsoft office with auditing experience in ISO 14001, ISO 45001 or ISO 9001.
• At least 5-8 years of working experiences as in WSH related fields or equivalent in manufacturing/ electronic or chemical industries.
• Good leadership skills to be able to guide and lead a team of EHS professionals.

Job Responsibilities:

1. Ensure quality management system effectively implemented and continuously improvement. Effectively execute internal audit and management review, and follow up with the corrective action after audit.
2. Monitor effectively to all system procedures; monitor the progress of company KPI target and current performance.
3. Quality training of internal auditor.
4. Ensure to pass the external (2nd and 3rd party) audit.
5. Handle customer complaints and quality related queries.
6. Implement customer requirement, carry out product quality plan for all projects and ensure PQP effectiveness.
7. Implement quality tools in production to support corrective and preventive actions and continuous improvement.
8. Part and line approval follow up (Q-package) in the whole project.

Job Requirements:

• College degree of Science/ Engineering or equivalent knowledge with 2+ years' experience in quality control including 1+ years’ experience in customer quality management, QMS and ISO Certification Audits.
• At least 1-year of quality engineer’s experience in incoming, manufacturing and customer service area.
• Strong leadership and result-driven / goal-oriented.
• Knowledge of quality system management standards, such as ISO 9001, IATF 16949, ISO 13485, ISO 14001 and ISO 45001.
• Be familiar with quality tools.
• Be familiar with the knowledge of IATF 16949 standard and 5 Tools(PPAP/APQP/SPC/MSA/FMEA).
• Knowledge of six sigma is preferred.
• Good IT skill-MS office/Minitab.
• Communication and presentation skill.

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

A leading company in the mobile industry and one of the largest SMEs in Singapore is looking to hire Mobile Quality Assurance Testers for their E-commerce Platform. You won't have to be in the office all day, and there's no need to interact with customers directly!

NO EXPERIENCE REQUIRED!

Working hours:

11am to 9pm - 6 days work week including 1 weekend (non peak seasons, 5 wd will be granted)

Once you've finished your daily tasks, you will be allowed to leave work early.

Benefits:

- AWS, Annual salary reviews, TCM, Medical, Dental & Optical benefits!

Job scope:

• Perform basic quality checks and analysis on mobile phones

• Execute inspection checklist in accordance with quality management guidelines set by company

• Maintain, organise and oversee database for all quality related issues

Requirements:

Open to travelling to 4-7 retail outlets daily depending on demand (transport allowance provided).

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Job Description & Requirements

• We look for technicians who can handle various GPS installation and customer management
• Electrical background with installation of various electrical and electronics items
• Experience in installation of GPS Devices in various vehicles
• Hands on experience in technical know-how of Teltonica devices and firmware
• Exposure to EV vehicles and their electrical diagrams
• Installation knowledge on CCTV / Door access devices etc
• Experience in Solar devices is a plus
• Provide Desktop support to users
• Knowledge in Phone systems, Server management is a Mandatory.

Job Responsibilities:

Responsible to lead the team on Piping & Layout design activities.

• Coordinate on project specific issues with the Piping Design Lead.

• Based on the client specifications, follow project specific procedure related to Piping & Layout design.

• Work closely with the Piping design lead of the project to understand the requirements and address the demand on time. Develop reports as required by the lead.

• In case of any technical challenges, troubleshoot to resolve the issues on time and if required escalate to Piping Design Lead for quick resolution. Plan tasks and issue the deliverables as per company procedures.

• Be familiar with the workflows in the project once they have been set up. Taking initiative and provide any input to the Piping Design Lead on time and highlight in advance if there are any technical challenges.

• Coordinate actively with other offices, for the projects being executed from multiple locations, attend meetings, and communicate effectively. Be flexible and ready to assume additional roles in the project.

• Perform 3D-modeling using E3D / PDMS for Mechanical, Safety, Soft Volumes, Escape & Transport Routes, Access & Material Handling Routes, Equipment modelling, Package modelling with required TP points, Piping and Pipe supports.

• Perform FPSO layout design which includes Turret, Hull and Marine Piping/ Pipe support design. Conduct 3D Model Reviews both internally and externally as per the Project requirements.

• MTO preparation and checking for the Piping Bulk items and Tagged Items.

• Vendor drawing review for the static Equipment’s/ Rotating Equipment’s/ Packages and ensure all the Nozzle orientations; Vessel cleats Support requirements are in line with Design Requirements.

• Perform and Checks the Model object clashes on regular basis and collaborate with other disciplines for effective cleaning of the 3D Model to make it clash free.

• Perform Design Review on regular basis by using E3D / PDMS / 3D model software such as Navisworks for establishing the suitability of Layout / Piping design in accordance with standards and codes.

• Issue of discipline deliverables in project specific templates.

Job Requirements:

Work Experience:

• Must have minimum of 10-12 years of experience having worked in an engineering setup for upstream oil & gas projects (Offshore & FPSO projects) serving in the capacity of a Piping Lead Designer.

• Must have experience is using E3D / PDMS, MDS, Navisworks, Autocad and MS Office

• Experience in Norwegian projects and applicants experience to the relevant standards, NCS.

Responsibilities:

Reporting to QA/QC Manager

Implement and maintain the Quality Management Systems(ISO9001-2015, ISO14001-2015, AS9100, ISO45001(OSHA), Nadcap)

Manage the Internal and External Audits.

Review specifications and requirements,

Collaborate with Manufacturing Team to develop and implement controls and improvements.

Ensure that workflows, processes, and products comply with Quality and safety regulations.

Investigating and troubleshooting Quality or production issues.

Identify Root Causes of problems; implements and monitor effectiveness of corrective/Preventive measures.

Monitor and analyze quality performance(KPI) to identify trends in product quality or defects with the goal of mitigating and preventing recurrence and future defects.

Performs any other duty as assigned by the management.

Requirements:

Diploma in Quality or Mechanical engineering.

2+ years of experience in quality engineering, quality assurance, or a similar role.

Hands-on experience with Quality Management Systems (QMS), inspection and testing methodologies.

Experience in QA/QC function, ability to read Technical Drawing and use of measuring instrument

Strong communication and interpersonal skills.

Strong analytical and problem-solving skills.

Excellent verbal and written communication skills.

Excellent organizational skills and attention to details.

Extensive knowledge of or the ability to quickly learn the organizations production processes.

Excellent interpersonal skills with ability to serve as a liaison with customers, suppliers and internal team members.

Proficient with Microsoft Office Suite or related software.

Certified Auditor is an added advantage.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Key Responsibilities:

• Track the quality of parts and products in the field
• Maintaining quality records
• Trending and highlighting quality of parts and products for corrective actions.
• Follow up on quality matters till final disposition.
• Conduct meeting with related departments and vendors
• Documentation of inspection processes
• Training and developing Technicians and Vendors
• Investigation of failures in the field and propose solution
• Comply with the EHS procedures
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Minimum Diploma / Degree in Mechanical, Manufacturing and Precision Engineering
• At least 5 years’ experience in Quality control and/or related work
• At least 2 years’ experience in ISO9001/ISO45001 related quality system and in use of the quality tools

The ideal candidate should have:

• Strong Interpersonal Skills
• Possess Ability to Communicate
• Must possess upmost integrity
• Must be meticulous and thorough
• Good quality mindset.
• Good analytical skill and possess initiatives.
• Singaporeans only