Job Description:

• Building & Demolition projects

• Restoration and Refurbishment Works

• Additions and Alteration Works

• Driving IDD implementation for the works

Job Requirements:

• Degree in Architecture, Civil & Structural Engineering, Mechanical & Electrical Engineering, Building Science or Quantity Surveying from a University recognized by the respective Professional Bodies or Professional Institutions.

• Minimum 5 years of practical experience in the design and/or construction management of construction projects with contract value of $5 million and above.

Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

General Overview

This position is part of the Instrument, Control and Electrical team that provides maintenance and technical support to the Production, Mechanical and Project teams in the LNG Terminal. This position is responsible for establishing, reviewing and overseeing the relevant instrument & control design of newly build or modified equipment including implementation of minor instrument and control engineering projects, while ensuring the overall technical integrity of the terminal from the instrument & control (I&C) discipline perspective.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical support and solutions for the Production and Maintenance teams for instrument-related issues
• Liaise closely with Production and Maintenance teams as to how to reduce instrument maintenance costs and increase availability and functionality.
• Liaise with external stakeholder including government agencies on possible gas pipeline network and electrical power grid, instrument and metering interfaces to ensure conformity.
• Prepare and update instrument maintenance procedures for all instruments, PLC, Fire & Gas system, ESD, metering, CCTV and security equipment is up to date
• Conduct root cause analysis for instrument related incident and recommend preventive and corrective actions to prevent future occurrence
• Carry out MOCs project to resolve and improve instrument reliability and operational issues from engineering, construction to commissioning
• Ensure verification, inspection, testing and reporting to management in respect of all electrical and instrument equipment used for maintenance and their certification for use in hazardous areas of the terminal.
• Participate and provide support in execution of maintenance or major equipment turnarounds in the terminal
• Manage functional safety lifecycle of SIS in the Terminal
• Support expansion project from meeting overall facility integrity point of view, ensure smooth integration and any opportunity to leverage with existing Plant is captured
• The incumbent shall also participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum eight (8) years practical experience in an instrument & control maintenance / design function in an oil & gas or petrochemical Plant
• Conversant with local codes, regulations and submission procedures, and must possess expert knowledge of electrical & instrument international engineering design
• Experience in functional safety for the process industry as per IEC 61511. Certified functional safety engineer will be an advantage
• Experience in installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical, instrument and control equipment in the oil, gas or petrochemical industry is required.
• Experience with common PLC programming software and languages and able to troubleshoot third party equipment issues through program debugging. Experience with Siemens PLC will be an advantage

Education

• The candidate must have a good Degree in Electrical & Electronics Engineering or equivalent.
• Candidate with professional accreditation or affiliation to professional bodies of engineers will have an advantage.

Performance Criteria

• Able to carry out day to day activities with minimum supervision.
• Able to perform installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical equipment and related instruments.
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Strong interpersonal, written and verbal communication skills
3. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties

1. Assist corporate clients in the establishing, implementation and maintenance of management system in accordance with various international and local standards such as ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 22000:2018, FSSC 22000, bizSAFE certifications,etc.
2. Provide professional advice and guidance to organization seeking consultation services.
3. Plan and execute project in accordance with client’s requirements
4. Able to work independently as will be working from home.
5. Conduct consultation at client premises.
6. Conducting internal audits and preparation of audit report
7. Any other duties as required by the Compan

Job Requirements:

1. Diploma or Degree in food science or food technology or safety and health related.
2. Minimum 1 years of working experiences in QEHS. Preferred those with experienced on QEHS / food safety consultancy and Quality, Environmental, Safety & Health experience.
3. Able to work independently and meet to each project timeline and deadline.
4. Candidate should be self-motivated and hardworking.
5. Candidate should be able to communicate effectively and interact with corporate clients.

1. Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.
2. Preparation of reagents/diluents/ dissolution media as per STP.
3. Perform a various qualitative tests or qualitative assays on samples using modern and automated instrumentation.
4. Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.
5. Ensure implementation of SOP for all corresponding activities.
6. Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.
7. Ensure real time documentation, maintain data integrity and appropriate traceability.
8. Assist in maintenance and calibration of test instruments per specifications.
9. Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.
10. Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.
11. Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.
12. Responsible for QC lab and equipment/instrument cleanliness.
13. Responsible for procuring and receipt of QC lab glassware and consumables.
14. Any other activities as and when assigned by the Superior.

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

UCT is looking for a talented Quality Inspector to join us in Singapore! The Quality Inspector is responsible for making sure that products meet standards of quality and safety. Responsible for performing inspections, checks and tests for quality control for the manufacture of products. Of Record (POR) documentation

Essential Duties and Responsibilities:

• Performs mechanical inspection to ensure all quality aspects of the job are met exactly.
• Raw materials, components, fabricated/manufactured parts & assemblies
• First Piece/First Article, Receiving/incoming inspection, in-process, final inspection
• Measures Complex components, assemblies and enclosures.
• Generates detail inspection and nonconformance reports as necessary.
• Inspection includes but is not limited to:
• Checks documents for accuracy and compliance to requirements
• Read and interpret information from engineering drawings, travelers, specifications and other documents to generate a complete and precise inspection report/record.
• Audits Quality Control process / programs to ensure compliance to standards
• Inspection(s) could be internal or external (i.e. source inspections)
• Interfaces and provides support to other departments, suppliers and customers on quality related issues as necessary
• Requires ability to maintain a clean and safe work environment
• Attain positive results and communication through team effort
• Strong organizational, problem solving and analytical skills, strong attention to detail.
• Develop inspection techniques and train Level 1 inspectors
• Performs other duties as assigned.
  

Knowledge, Skills and Abilities:

• Strong written and verbal communication skills
• Intermediate working knowledge of MS Office applications and database software
• Must be computer literate!
  
• Intermediate math abilities
• Must be able to read and apply production instructions, drawings, BOM schematics, and specifications at a proficient level.
• Intermediate level of GD&T (Geometric Dimensioning and Tolerance), must be able to independently and adequately interpret and apply GD&T to every job in a daily basis
• Must be able to operate manual CMM’s independently and edit CMM programs to make necessary changes to run accurate programs successfully.
• Able to read and interpret specifications, standards and engineering drawings/Blue Prints.
• Intermediate level for mechanical measurement techniques and workmanship standards related to machining and basic knowledge of secondary processes such as: paint, power coat, plating, etc.
• Must be able to read and interpret with weld symbols, call-outs, wiring and/or crimping requirements.
• Must be able to calculate flat patterns and inspect precision sheet metal
• Familiarity with Agile, SAP ERP will be advantages
• Must be able to use must hand held tools (micrometers, calipers, Others)

Educational/Certification Requirement:

• High School Diploma
• Technical Certification on similar discipline (Mechanical Quality, Engineering Services, Others)

Work Experience :

• Minimum 5 years working in production environment in electromechanical sub-assemblies or large integrated tools
• Experience working in a clean room environment preferred

Quality Lab Support Coordinator

6 months contract

About the Company:
Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Receive, archive, retrieve and dispose retention sample, following standard work, approved procedures and regulatory requirements in timely manner.
• Maintain proper 5S and ensure inspection readiness of retention sample rooms.
• Perform assigned tasks within stipulated timeline and escalate discrepancies to Reporting Manager.
• Support laboratory supplies stock check, receiving, stock arrangement and disposal as necessary.
• Any other duties as assigned by reporting manager.

Requirements:

• GCE O Level qualification and above
• Proficient with computer software such as Microsoft Word & Excel
• The role will require the person to be able to move heavy boxes up to 15 KG during process like transfer of samples/stocks checking.
• Customer focus with strong business acumen and continuous improvement mindset.
• Critical thinking mindset with a collaborative and problem-solving attitude.
• Good communication and interpersonal skills.
• Ability to work effectively in a team-based environment.

Reg No: R22104540

EA License no: 94C3609

Job Description:

• Drive PGCS Quality programs and policies compliance across site, by partnership with functional stakeholders.
• Key contributor/promoter to the advancement of Quality function across the sites; creating and driving critical/key business objectives in line with supporting/partnering with Operations, Supply Chain functions etc.
• Lead incident management and resolution and champion customer quality across Singapore. Site lead for Quality and Food safety crisis mgmt.
• Lead the implementation of the Singapore Quality Strategy including communication, project management and roll out activities.
• Lead continuous improvement culture/productivity initiatives to support site BPI process, demonstrating best practices to implement all quality improvements
• Drive, support and champion KPIs, key Quality metrics, etc.
• Act as a business partner to other functions whilst championing Quality, to ensure an extended and consistent quality focus.
• Be a key member of the Site Leadership team and value add in driving functional and site agenda.
• Support and provide strategic guidance around NPIs, validation, Total Quality System, Compliance, Capital investment, etc.
• Partnership with other functions ensuring change control risk assessment and validation in place for Network capacity projects and other key projects and significant changes.
• Financial Management; Budgetary and AOP responsibilities/input.
• Compliance; drive partnership with other functions through the Quality team to achieve key business goals for the control environment. Compliance with all regulations and 3rd party auditing requirements.
• Provide strategic quality leadership to the extended Quality Team
• Organisation design & sustainability of a highly effective team with appropriate succession plan. Encourage, manage & promote people-related activities/processes, partnering with HR
• Develop capability, personal growth and career development for direct reports, support these activities with DRs’ associated teams.
• Play in instrumental role in developing the overall team capability, supporting and aligning with overall plant culture.
• Ensure the smooth transition of new products to the Singapore facilities.
• Manage the complexity of additional materials, packaging and concentrate components from a quality perspective as portfolio expands
• Support and implement PGCSSC global quality initiatives
• Systems improvements (including IT systems) in terms of Processing, GMP, Product Safety, Disposition and Traceability.
• A requirement of the role is that you must adhere to all PepsiCo Health & Safety requirements.

Qualifications :

• Bachelor’s Degree in Science, Food Technology, Chemistry or any other related discipline
• Minimum 7 years of relevant experience as a supervisor in operating Laboratory environment, manufacturing concern/MNC
• Ability to manage senior stakeholders and leadership team members
• Experience in People Management and prior supervisory skill
• Possess knowledge of and experience in GLP, HPLC / GC operation, SAP QM module and LIMS management
• Strong leadership presence, ability to manage and co-ordinate with cross-functional teams on investigation analysis, troubleshooting and issues resolution
• Knowledge of food safety quality standards such as HACCP and FSSC 22000
• Ability to lead change and drive behaviours
• Ability to organize and manage multiple priorities in high-pressure work environment
• Strong collaboration and influencing skills
• Excellent communication and interpersonal skills, both verbal and written with ability to clearly articulate ideas and proposals to all levels of the organization
• Positive and Can-do Attitude
• Willing to stretch and take additional responsibilities when needed
• Lead by example to others

Kindly note that this is a short-term role based in Singapore.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Sobono Group Profile

Sobono Group is a leading energy solutions provider in the Asia Pacific region, committed to sustainability and innovation. We are developing the RExus Waste Wood to Energy (WWtE) Plant and, in parallel, other renewable energy plants regionally.

Job Position – Electrical & Instrumentation Control (E&IC) Engineer

The Electrical Engineer will play a critical and challenging role in the design, engineering, and construction of the electrical systems for the RExus WWtE Plant. This position will be responsible for overseeing all electrical engineering aspects of the project, ensuring compliance with industry standards and project specifications.

Key Responsibilities:

· Develop, execute, and manage capex projects according to company guidelines, meeting operational, technical, commercial, and HSEQ standards.

· Develop and review electrical design drawings, schematics, and specifications.

· Coordinate with other engineering disciplines (mechanical, civil, instrumentation, and control) to ensure seamless integration of electrical systems.

• Prepare detailed electrical equipment and system specifications.

· Interpret and implement project technical specifications, attend meetings for technical clarifications, and facilitate identifying and mitigating engineering risks.

· Review and approve vendor documentation, including equipment data sheets and technical specifications.

• Oversee the procurement and installation of electrical equipment.
• Perform site inspections and commissioning activities.
• Ensure compliance with relevant electrical codes, standards, and regulations.
• Troubleshoot electrical issues and implement corrective actions.
• Prepare technical reports and documentation.
• Coordinate with the project team to ensure timely completion of electrical work.

Qualifications:

• Bachelor's degree in Electrical Engineering or related field.
• Minimum of 3 years of experience in electrical engineering, preferably in the power plant or industrial sector.
• Strong knowledge of electrical design principles, standards, and regulations.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, ETAP).
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.

Preferred Qualifications:

• Knowledge of power plant control systems and automation.
• Experience in project management.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a Specialist you will be responsible for support and administration (system back-up, user access administration) for LIMS, MODA and other related Laboratory computerized systems. This role also requires to process the LIMS and MODA static data requests

Responsibilities

• Support and administration (system back-up, user access administration) for Sample Manager LIMS, MODA LIMS, iLAB, and other related Laboratory computerized systems
• Maintenance of LIMS static data (Sample Manager LIMS, MODA LIMS and STATISTICA systems)
• Support for installation and qualification/ validation of software related aspects of computerized instrumentation
• Actively contributes to operational efficiency/continuous improvement initiatives.
• Support system audit trail review all related Laboratory computerized systems
• Maintenance of software related changes to computerized instruments
• Server and database maintenance and administration as relates to laboratory systems
• Provide training for the roll-out of new computerized systems.
• Generation and execution of computer validation documentation (protocols and reports)
• Can identify computer related issues; troubleshoot, identify and complete or coordinate deviation, change control and/ or corrective action records.
• System/ equipment manufacturer and or vendor interaction as required in order to trouble shoot system issues.
• Available to troubleshoot and resolve critical system issues as they occur.
• Experience manages projects (people/ team environment) to meet the timelines.
• Customer and regulatory agency interaction as required.
• Oversight of computer system policies and procedure in order to ensure policy is aligned with current regulatory expectations.
• Familiarity with 21 CFR Part 11 and EU Annex 11 requirements, data integrity requirements and expectations as well as common industry practice with respect to laboratory computerized system management and administration.
• SME in 1 or more areas as aligned with training plan.

Experience

• Degree/Diploma in relevant Science field or Equivalent
• Minimum 5 years of experience
• Relevant work experience preferably Lab related IT experience in a biotech or medically related field.
• Experience in lab computer systems essential (prefer experience with LIMS, and CDS –Chromatography Data Systems

​

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

R63209

Job Responsibilities

1. System Design and Development

• Design motion control systems, including hardware and software components.
• Develop and test control algorithms for precision motion systems.
• Create detailed design specifications and documentation.

2. Component Selection and Integration

• Select appropriate sensors, actuators, motors, and controllers for the motion control system.
• Integrate components to ensure seamless operation and optimal performance.
• Work with suppliers and vendors to source high-quality components.

3. Simulation and Testing

• Conduct simulations to predict system behavior and validate design choices.
• Develop and implement testing protocols to evaluate system performance.
• Troubleshoot and resolve issues identified during testing.

4. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers.
• Communicate design concepts and progress to stakeholders.
• Collaborate with manufacturing teams to ensure designs are feasible and cost-effective.

5. Optimization and Improvement

• Continuously improve motion control systems for better efficiency, accuracy, and reliability.
• Stay updated with the latest advancements in motion control technology.
• Implement feedback from field tests and customer use to refine system designs.

6. Project Management

• Manage project timelines, budgets, and resources.
• Ensure projects meet deadlines and quality standards.
• Coordinate with project managers and other engineers to align with project goals.

Required Skills and Qualifications

1. Technical Skills

• Proficiency in motion control technologies and principles.
• Experience with CAD software for designing mechanical and electrical components.
• Knowledge of programming languages (e.g., C/C++, MATLAB, Python) for developing control algorithms.
• Familiarity with PLCs (Programmable Logic Controllers) and HMI (Human-Machine Interface) systems.

2. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot complex motion control issues.

3. Education and Experience

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Robotics, or a related field.
• Relevant experience in designing and implementing motion control systems.

4. Soft Skills

• Excellent communication and teamwork skills.
• Strong organizational and project management abilities.
• Attention to detail and a commitment to producing high-quality work.

Additional Responsibilities

• Compliance and Safety

• Ensure all designs comply with industry standards and safety regulations.
• Conduct risk assessments and implement safety measures in system designs.

• Innovation and Research

• Engage in research and development to explore new motion control technologies.
• Innovate and propose new solutions to enhance system performance and capabilities.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning. Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Qualifications:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork skills.
• Ability to manage multiple projects and meet deadlines.
• Singaporean only.

Preferred Skills:

• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Quality Inspector (Jurong East)

working hours: 5 days - 8am - 5.30pm + evening/ weekend OT

base salary + OT pay + 1 month AWS + company shuttle bus (no VB)

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

We are looking for Part-Time Technician.

Job include handling of equipment to gather data from the Sub-Station Control Panel.

Relay Flash firmware at the Switch Room.

Prefer those with class 3 driving license.

Job duties in multiple locations.

No experience is required as training would be provided.

Interested applicants, please call Mr. Lim @ 90629499 to fix appointment for interview.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Responsibilities

• Provide analysis and dispositions on non-conformance products in accordance to requirements
• Perform inspection and verification (visually or using measuring tools) on product on hold due to quality issues
• Work closely with supervisor & team to monitor project status and closures (team coordination)
• Communicate with customers status of quality projects assigned to his/her area of responsibility
• Prepare regular reports and meet submission deadlines (weekly, monthly)
• Actively participates with internal team projects analysis

Requirements

• Degree in Electronics or Engineering or related field with relevant experience in electronics / semiconductor / or other manufacturing industry
• Entry level candidates are welcome to apply
• Basic knowledge in Microsoft Office (Word, Excel, PowerPoint)
• Team player with good written / verbal communication and interpersonal skills
• Strong sense of urgency with ability to meet deadlines and work independently
• Knowledge in basic manufacturing solving problem tools (8D, FMEA) and statistical tools (SPC) is an advantage.
• Highly motivated to learn new skills / systems / analytical tools used in manufacturing operations

Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

·Able to work on PH ,Night shif and Weekend

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753