Job Summary:

• Mon-Fri, 8am to 5pm
• Location: Woodlands
• one year contract , renewable

Responsibilities:

• Maintain and update information in SAP notifications and handle related transactions.
• Coordinate on-site rework activities and inspect materials to ensure quality standards are met.
• Manage notifications and communications with suppliers regarding material issues.
• Inspect materials for defects and issue scrap notices as needed.

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified
We wish you all the best in your career search.

EA License No: 20C0280
EA Personnel No: R24120480
EA Personnel Name: Chua Yun Jie (Clarisse)

Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

Job Description

Be part of a team designing, developing and delivering software products for airport/warehouse/production logistics solution.

Roles and Responsibilities:

· Design and develop various software applications/modules for baggage/material handling solution.

· Develop interface with PLC and other external systems.

· Develop documentation such as function specification, detailed design specification, test plan.

· Perform onsite testing and commissioning.

· Conduct user training and system operation support if required.

Requirements:

· Degree/Diploma in computer science, computer engineering, information technology or related discipline.

· Proficient in programming with Java/Python/C#/Java Script.

· Experience in SQL and Microsoft SQL Server.

· Minimum 1-2 years software development experience.

· Good analytical and problem-solving skills.

· Able to work independently as well as within a team.

· Travelling to oversea for project deployment is required.

· Experience in web application development is a plus.

· Experience in Windows system administration is a plus.

· Experience in IT network administration is a plug.

· Fresh graduates are welcome to apply.

• Reviewing and revising testing procedures.
• Conducting inspection checks on goods and production processes.
• Performing manual and automated quality checks.
• Ensuring employees adhere to safety and quality regulations.
• Reporting safety and quality infringements to the QA manager.
• Identifying possible areas for improvement in quality control processes.

• Reviewing and revising testing procedures.
• Conducting inspection checks on goods and production processes.
• Performing manual and automated quality checks.
• Ensuring employees adhere to safety and quality regulations.
• Reporting safety and quality infringements to the QA manager.
• Identifying possible areas for improvement in quality control processes.

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

OT available

JOB DESCRIPTION

• Conduct inspection of incoming, in-process and final inspection on machined parts, weldments and assemblies as per technical drawings, customer’s specifications and requirements through the use of various types of inspection equipment set up
• Perform dimension check on parts, components and tools using micrometers, calipers, comparators, indicator, CMM & CREAFOAM
• Perform visual, mechanical and functional check on components.
• Report non-compliance parts to QA Engineer
• Performs visual and dimensional inspection of incoming and outgoing components/parts
• Understand current specifications involving inspection tolerances, limitations, and procedures.
• Responsible for conducting inspection in accordance with approved technical data.

REQUIREMENT

• GCE ‘O’ / ‘A’ Level with minimum 2 year working experience or
• Diploma in Mechanical / Manufacturing / Quality Management with minimum 1 year working experience.
• Good interpersonal skill and ability to communicate with all levels.
• Good understanding of technical drawing
• Familiar with all inspection methods and techniques
• Basic understanding of General Dimension & Tolerance control
• Proficient in the use of various types of inspection equipment and visual inspection aids

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distribute to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Resolves quality related issues arising from sub-contractor and in-house production
• Performs E&I related Equipment and material inspection during receiving meet the purchase specifications
• Ensures protection and preservation of Electrical & Instrument system
• Ensures updates on electrical completion and mechanical completion progress at the project database
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing/ commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issues improvement note, where necessary
• Performs any other assigned duties and responsibilities

Requirements:

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Electrical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Familiar with loop test, hi pot test, mechanical completion checks ITR

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Roles & Responsibilities

Responsibilities & Job Descriptions

• Developing and managing project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Manage and deal with site technical & design issues, communicate & liaise with Clients, Architects, Consultants, Developers & key stakeholders of project from beginning to till final completion of project.
• Managing procurement processes, including Tendering, bid evaluations, contract negotiations and vendor selection.
• Conducting regular site inspections to assess project progress and cost control.
• Manage and coordinate all aspects of assigned projects from start to finish, ensuring that projects are smooth in operation and completing on time, within budget, good quality and to the satisfaction of clients.
• Develop and maintain project documentation, including project plans, progress reports, and other project-related documentation.
• Attend all required site project meetings with consultants and clients, including necessary follow-ups and ensuring that project goals and objectives are met for all the projects in the company.
• Setting up site meeting with subcontractors, internal team members, and project related vendors to ensure effective progress of project.
• valuation of Monthly Progressive Claim to Client & reconcile.
• Verify and approve periodical assessment of progress claims of sub-contractors/suppliers with the Project QS/Purchaser till the settlement of final account.

Qualification

• Bachelor’s degree in any Civil / Construction Engineering discipline or equivalent
• At least 10 years overall work experience is required.
• At least 7 years relevant project control management work experience is required for this position.

Requirements

• Proficiency with project management software and tools (i.e. Primavera, MS Project, Autocad, etc).
• Able to work in project sites and travel for meeting in different venues as required.
• Understand the Drawings and able to take-off quantities and create the budget and monitor the cost throughout the project.
• Liaise with Government Authorities for getting the approvals for proceeding the site activities.
• Other ad-hoc duties required to carry out.
• Able to work for Extended hours.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

You may also email us your resume to [email protected].

Job Responsibilities:

1. Handle customer complaints and quality related queries
2. Implement customer requirements, carry out product quality plan for all projects and ensure PQP effectiveness
3. Implement quality tools in production to support corrective and preventive actions and continuous improvement
4. Part and line approval follow up (Qualification Package) throughout the project
5. Handle Internal Quality issues and liaise with cross-functional team towards improvement
6. Ensure related documents are updated accordingly for lesson learnt and continuous improvement

Job Requirements:

• College degree of Electronics/Electrical Engineering
• Experience in quality control and customer quality management.
• Experience in manufacturing and customer service area.
• Experience in Surface Mount Technology (SMT) and Box Build Assembly industries.
• Familiar with quality tools and have basic knowledge of six sigma.
• Familiar with the knowledge of IATF 16949 standard and 5 Tools (PPAP/APQP/SPC/MSA/FMEA).
• Good IT skill-MS office/Minitab.
• Good inter-personal and presentationskill.
• Self-motivated and good team player.

The Design for Reliability (DfR) Engineer is responsible for applying engineering and statistical knowledge to prevent or reduce the likelihood of failure of internally developed products. The DfR Engineer uses various methodologies and tools to work closely with those who design, develop, test, manufacture, deliver and support our products and services to achieve operational reliability.

• Guide the project teams in the implementation of reliability engineering methodologies, techniques, standards, procedures and the application of appropriate statistical tools.
• With the project team, set reliability targets for products under development.
• Gather field reliability data, populate the reliability model and identify areas of concern.
• Calculate cumulative effect on final system reliability of individual part reliabilities, identify gaps and determine appropriate actions to achieve customer specified operational reliability.
• Conduct technical risk analysis such as a FMEA to determine specific risk areas. Develop tests to be conducted based as identified by FMEA results.
• Rationalize tests to be conducted to determine sample size, test methods and other details that will produce efficient, statistically valid results.
• Monitor the test program and recommend adjustments as needed to meet reliability targets.
• Participate in technical design reviews and contribute solutions to reliability related issues.
• Coordinate root cause analysis of failed items.
• Compile and communicate lessons learned and ensure prevention of failures by archiving captured knowledge for re-use.
• Monitor and analyze key reliability indicators during product development and after commercialization, and keep management informed.

Experience & Exposures:

• Technology or Manufacturing Center
• Maintainability
• Reliability Engineering

Key Competencies:

• Statisical Methods (Hypothesis Testing, ANOVA, Design of Experiments, etc)
• Reliability Calculations (Survivability, Mean-Time-To-Fail, etc)
• Mechanical System Design
• Testing

Previous Experience and Competencies:

• Bachelor in Mechanical Engineering or in related field.

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

Job description

Roles and Responsibilities

• Work closely with the Management, Manager and teams to determine the materials and processes needed to cover the production demand.

• Establish daily٫ weekly and monthly objectives and communicate them to employees

• Assign workers to each production activity and monitor their work to ensure that they finish on time and within the quality standard.

• Address issues immediately when they arise so as to reduce disruption to the production.

• Perform quality checks and control on the production throughout the various stages of production.

• Provide quality output.

• Ensure no quality issue for the end products.

• Guide and coach new employees٫ monitoring their productivity.

• Oversee safe use of equipment and schedule regular maintenance.

• Prepare reports on performance and progress and present them to senior Managers or Management.

• Detect issues in efficiency and suggest improvements.

• Ensure good housekeeping of the production areas and promote safe work practices at all times.

• Ensure strict adherence to safety guidelines and company standards.

• Any other ad-hoc duties or projects as and when assigned by the Manager or Management.

Job Requirement:

• Candidate must possess at least Diploma or degree in Mechanical engineering or equivalent.

• At least 1 to 2 Year(s) of working experience in the related field is required for this position.

• Demonstrated ability to work in a team environment

• Ability to communicate effectively with co-workers, both orally and with written correspondence

Roles & Responsibilities

Analytical Laboratory:

• Process control (Eg. Production parameter control)

• Quality control (Eg. Finished goods periodical testing)

• Familiar with the operations/technique of analytical instruments

• R&D of new processes on a lab-scale

• Maintain and control of laboratory analytical and testing records

Process:

• Perform First-Article testing for new customers or parts, prior to mass production

• Perform review/gap analysis on customer’s specifications for chemical processes, with adequate process control measures

• Involve in quality issues investigations, troubleshooting, root cause analysis and corrective action implementation

• Lead investigations for recovery action on any non-conformity

• Control of chemical logistics for entirety of production

Waste-water treatment plant (WTP):

• Manage and maintain WTP at optimum system performance for treatment of chemical waste

• Troubleshoot WTP system issues when waste discharge is non-compliant to Trade Effluent standards

• All other tasks that might be assigned from time to time

Min Academic Requirement:

• Diploma in Chemical Engineering or Chemistry related

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Job Title: Quality Inspector
Location: Tuas
Working Hours: Mon to Fri 8.00am-5.00pm
Basic Salary: $2000-$3500

Role Summary:

• Uphold the quality policies that our company has created and oversee the product inspection process to ensure that all products meet industry & customer expectations.

• Provide support on quality inspection on elastomers, engineering plastics & metallic products and ensure all products are inspected thoroughly to meet the company’s and customer’s expectations.

Job Description

• Perform regular and timely quality inspections, including dimensions & hardness as applicable on all incoming materials, engineering plastics, metallic and elastomers products.

• Perform documentation review of incoming materials, engineering plastics, metallic, and elastomers products.

• Reject all products and materials that fail to meet quality expectations and ensure proper part segregation.

• Prepare and support incoming compound test for review & approval.

• Ensure that the requirements of the documented quality system are adhered to, and work produced complies with drawing and specifications.

• Perform production 1st piece inspection for CNC plastics, CNC metallic, and elastomers products as required in a timely manner and complete inspection records.

• Perform in-process inspection for CNC plastics, CNC metallic, and elastomers products as required in a timely manner and complete inspection records.

• Perform final inspection for CNC plastics, CNC metallic, and elastomers products as required in a timely manner and complete inspection reports in M3.

• Perform outgoing inspection for CNC plastics, CNC metallic, and elastomers products as required in a timely manner and complete inspection reports based on customer requirements.

• Perform outgoing inspection for traded products as required in a timely manner and complete inspection reports based on customer requirements.

• Support engineering for first article (FA) inspection of CNC plastics, CNC metallic, and elastomers products, including inspection report creation and submission.

• Support engineering for inspection with regards to day-to-day quality defects troubleshooting.

• Raise internal deviation report (IDR) for daily inspection fallout and follow up with engineering's disposition to close out the actions required in the IDR.

• Verify the content of manufacturing orders against customer requirements (e.g., drawings, BoMs).

• Close out QC final inspection operations in manufacturing orders in the M3 system and report inspection results for accepted and rejected quantities with their respective quality defect reasons.

• Ensure that traceability is maintained throughout, actively follow up on in-house traceability/material traceability matters with relevant personnel, and follow up with upstream traceability if it is not made available.

• Ensure all measuring, monitoring, and testing equipment are in working condition and within the calibration period before usage.

• For Senior Quality Inspector: Coach quality inspectors, work with minimal supervision, and assist the Quality Specialist/Senior Quality Engineer in scheduling daily quality inspections required for delivery.

• For Senior Quality Inspector: Perform inspections on rubber, plastic, metal & bonded seals products.

• Perform other duties and responsibilities as assigned by the Senior Quality Leader/Senior Quality Engineer.

Requirement:

• Min. Nitec in any field or equivalent with a minimum of 2 years of working experience in a QA/QC/manufacturing environment.

• Experience in the Oil & Gas and rubber manufacturing environment is an added advantage.

• Minimum 2 years of relevant experience in dimensional and hardness inspections in the Oil & Gas Industry.

• Ability to read part drawings and usage of measuring equipment are added advantages.

• Computer literacy and competency.

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

System Framework Responsibilities (Regional)

Quality and Safety System Management

· Set and maintain the MC Packaging Quality and Safety system.

· Document and enforce manufacturing standards and expectations (e.g., traceability, sanitization, GMP).

· Generate key reports on meeting required quality standards and overseeing production process efficiency. (Mainly Singapore and Malaysia)

· Prepare documents for internal and external quality audits and maintenance of line control equipment files. (Mainly Singapore and Malaysia)

· Support projects on quality and safety risk assessment and mitigation actions.

Regulatory Compliance and Auditing

· Assess and report compliance together with MC Packaging Quality and Safety system (e.g., audit policies for vendors, external and internal manufacturing sites, and relevant supply chain functions).

· Identify continuous improvement opportunities for performance and efficiency, and implement fit-for-purpose initiatives.

· Lead and support the Issue and Crisis teams for major events involving MCP manufacturing sites and external partners.

Policy and Standards Development

· Develop and maintain compliance standards for the QA organization across Singapore, China, and Malaysia. (4 sites)

· Set standards and expectations for MCP and external manufacturing sites.

Stakeholder Collaboration

· Partner with internal stakeholders & external stakeholders, ensuring continuous control over materials, facilities, and products.

· Chair meetings with QC Heads of Departments (HODs) and hold regular meetings with Factory / Operations / General Managers

· Work closely with the Business Unit Owner related to Quality Assurance of different manufacturing sites.

· Improve staff skills through training programs.

Manufacturing Responsibilities (Singapore Primary, Malaysia Secondary)

Quality Control Operations

· Manage and lead QC operations for Singapore plant, and ad hoc Malaysia (Iskandar)

· Ensure high consistent quality standards and enforce stringent control processes.

· Introduce up-to-date monitoring of factory operations to ensure quality compliance.

Issue Resolution

· Lead investigations for defective quality issues raised by customers, especially key customers.

· Establish root causes and implement effective corrective actions to prevent mistakes.

· Lead the Quality Team, ensuring overall manufacturing quality function and compliance.

Technology and Equipment Upgrades

· Plan upgrades for advanced QC test equipment and reliable software technology.

Experience and Competency

· Experience in the Manufacturing industry, preferred in the metal packaging industry.

· Having experience in Manufacturing Quality Management, GMP knowledge, Analytical Skills, Manufacturing & Control Analysis, Root Cause Analysis

· Strong in Quality Assurance/Quality Control, Problem Solving, Team Player.

· Strong interpersonal, communication, and customer service skills are also essential because document control specialists regularly communicate with internal and external business partners.

· Ability to interact effectively at all personnel levels and with all functional departments to achieve the objective of the quality management system.

· Bachelor’s degree in Quality, Mechanical or Industrial Engineering or equivalent combination of experience and education. Over 10 years of experience in Quality, Process Improvement, Manufacturing, or equivalent.

· Deep understanding of quality systems, and environmental and regulatory parameters.

· Broad business knowledge and integration of Marketing, Operation, and Quality strategies.

· Accountability – Holds self and others accountable for results and how they are achieved. Has an optimistic “can do” approach. Provide focus and drive to overcome obstacles and get the result we want.

· Proven experience in handling Issues and Crises

· Experience in a managerial role – regional

· Proficiency in English – ability to read and write

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Mackay Marine is a global marine electronics service and satellite communications company with more than 460 employees spread across 45 service locations (depots) in seventeen (17) countries, including the Americas, Europe, and Asia. For over fifty (50) years Mackay has sold, installed, and serviced navigation and communication equipment onboard commercial and naval ships. Mackay offers competitive salaries, benefits, and opportunities for growth based on merit.

Mackay is currently seeking an experienced and local Inventory Control Clerk, to join our Singapore location.

INVENTORY CONTROL CLERK JOB SUMMARY:

The Inventory Control Clerk is responsible for responding to inventory requests, ordering materials for multiple offices, performing depot-to-depot transfers, applying freight costs for billing, and providing pricing for service quotes. As well as maintaining established stock levels, requesting RMAs from vendors for returns, handling warranty claims and/or exchanges, and assisting with cycle counts. The Inventory Control Clerk will stage spare parts for service jobs, check parts out to technicians, and confirm that all parts are either returned or posted to a work order.

Responsibilities:

• Always follows Mackay’s policies and procedures.
• Audits shipments and receipts daily. Updates internal logs, and files related paperwork.
• Maintains an adequate supply of shipping materials.
• Processes orders of materials for the service department as well as for sales.
• Respond to RFQ’s from the service department, and via email, fax, telephone, and website as requested.
• Keeps an accurate control of materials used, track freight costs, and applies to customer invoices.
• Requests RMAs from vendors for returns, warranty claims, and/or exchange parts.
• Ensures the accuracy of orders received; validates quantity, verifies part numbers, and serial numbers against shipping documents and company purchase order.
• Label and maintain inventory in accordance with established procedures.
• Daily control of ‘Kits’ checked out to and back in from MSE’s. Record parts used from service kits, restock parts returned, and maintain inventory levels in accordance with department policy.
• Responding to and monitoring email.
• Other tasks as assigned by supervisor.

The ideal candidate will be punctual, reliable, self-motivated, and have the proven ability to work independently in a faced-paced environment.

QUALIFICATIONS:

• Valid Singapore Driver’s License
• 3+ years of inventory and/or stockroom experience.
• Strong proficiency with MS Office applications, especially Excel.
• Excellent verbal and written communication and interpersonal skills.
• The ability to interpret and solve problems and issues, using instructions, diagrams, or schedule forms.
• Lift up to 20-25 kilos.

Mackay Marine, is a Fair and Equal Employment Employer who recruits employees based on merit criteria (skills and experience), regardless of age, race, gender, religion, marital status or disability; by providing to all employees fair growth opportunities, as well as training based on their needs and rewards based on their performance and contribution.

Responsibilities & Job Descriptions

• Developing and managing project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Manage and deal with site technical & design issues, communicate & liaise with Clients, Architects, Consultants, Developers & key stakeholders of project from beginning to till final completion of project.
• Managing procurement processes, including Tendering, bid evaluations, contract negotiations and vendor selection.
• Conducting regular site inspections to assess project progress and cost control.
• Manage and coordinate all aspects of assigned projects from start to finish, ensuring that projects are smooth in operation and completing on time, within budget, good quality and to the satisfaction of clients.
• Develop and maintain project documentation, including project plans, progress reports, and other project-related documentation.
• Attend all required site project meetings with consultants and clients, including necessary follow-ups and ensuring that project goals and objectives are met for all the projects in the company.
• Setting up site meeting with subcontractors, internal team members, and project related vendors to ensure effective progress of project.
• valuation of Monthly Progressive Claim to Client & reconcile.
• Verify and approve periodical assessment of progress claims of sub-contractors/suppliers with the Project QS/Purchaser till the settlement of final account.

Qualification

• Bachelor’s degree in any Civil / Construction Engineering discipline or equivalent
• At least 10 years overall work experience is required.
• At least 7 years relevant project control management work experience is required for this position.

Requirements

• Excellent experience in managing of Construction projects in Oil & Gas industry (especially in Jurong Island) is strongly required.
• Proficiency with project management software and tools (i.e. Primavera, MS Project, Autocad, etc).
• Able to work in project sites and travel for meeting in different venues as required.
• Understand the Drawings and able to take-off quantities and create the budget and monitor the cost throughout the project.
• Liaise with Government Authorities for getting the approvals for proceeding the site activities.
• Other ad-hoc duties required to carry out.
• Able to work for Extended hours.
• Perform to work on Weekends and Public Holidays.
• Class 3 Licence is required.

Quality Support, Specialist

(12 month contract)

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Primary Responsibilities:

The role will ensure and maintain high standards of quality and compliance within client’s organization.

In this role, you will be responsible for all or subset of the key responsibilities below:

• Perform laboratory system lifecycle management, including system qualification/retirement, commissioning/decommissioning, calibration and maintenance, system administration, and periodic reviews, in accordance with approved procedures and standard lead time.
• Raise Computerize Maintenance Management System (CMMS) request form to create/update/delete SAP master data related to laboratory system.
• Raise purchase request and perform orders confirmation and accrual for laboratory system lifecycle management, inventories, maintenance and repairs orders.
• Liaise with vendor to ensure contractor management documentation and assigned vendor tasks are completed within assigned lead time.
• Perform and review of Quality documents such as eshopfloor logs, eVal and etc.
• Assist in conducting laboratory investigations and ensure effective implementation of related actions within the agreed timeframe.
• Provide inputs for the development and revision of Standard Operating Procedures, Work Instructions and other GMP documents.
• Maintain proper laboratory/storage area housekeeping/5S and ensure inspection readiness.
• Execute section and Quality improvement initiatives and other special projects.
• Any other duties as assigned by reporting manager
• Provide skills training to other team members, ensuring they have the necessary knowledge and competencies to perform their duties effectively.
• Conduct troubleshooting of laboratory system lifecycle, identifying and resolving any issues that may impact the business/work efficiency.
• Assume role of Subject-Matter-Expert of laboratory system lifecycle, collaborates closely with other site and above-site functions. This includes actively participating in discussions, sharing expertise, and providing input to ensure alignment and consistency across the organization.
• Support Reporting Manager in planning of routine operations tasks to ensure completion within stipulated timeline.
• Support and respond to audit requirements and findings.
• Perform assessments of compendial updates and implement changes to Standard Operating Procedures, Work Instructions and other GMP documents.

Requirements:

• Diploma or Bachelor’s degree in Science/ Life Science, Pharmaceutical Science or Engineering or any other relevant field
• At least 3 years of relevant working experience in GMP environment with quality control laboratory experience within the pharmaceutical/chemical manufacturing.
• Competency in analytical chemistry tools such as HPLC, root cause analysis methods and tools.

Reg No: R22104540

EA License no: 94C3609

Quality Support, Associate Specialist

(12 month contract)

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Primary Responsibilities:

The role will ensure and maintain high standards of quality and compliance within client’s organization.

In this role, you will be responsible for all or subset of the key responsibilities below:

• Perform laboratory system lifecycle management, including system qualification/retirement, commissioning/decommissioning, calibration and maintenance, system administration, and periodic reviews, in accordance with approved procedures and standard lead time.
• Raise Computerize Maintenance Management System (CMMS) request form to create/update/delete SAP master data related to laboratory system.
• Raise purchase request and perform orders confirmation and accrual for laboratory system lifecycle management, inventories, maintenance and repairs orders.
• Liaise with vendor to ensure contractor management documentation and assigned vendor tasks are completed within assigned lead time.
• Perform and review of Quality documents such as eshopfloor logs, eVal and etc.
• Assist in conducting laboratory investigations and ensure effective implementation of related actions within the agreed timeframe.
• Provide inputs for the development and revision of Standard Operating Procedures, Work Instructions and other GMP documents.
• Maintain proper laboratory/storage area housekeeping/5S and ensure inspection readiness.
• Execute section and Quality improvement initiatives and other special projects.
• Any other duties as assigned by reporting manager
• Provide skills training to other team members, ensuring they have the necessary knowledge and competencies to perform their duties effectively.
• Conduct troubleshooting of laboratory system lifecycle, identifying and resolving any issues that may impact the business/work efficiency.
• Assume role of Subject-Matter-Expert of laboratory system lifecycle, collaborates closely with other site and above-site functions. This includes actively participating in discussions, sharing expertise, and providing input to ensure alignment and consistency across the organization.
• Support Reporting Manager in planning of routine operations tasks to ensure completion within stipulated timeline.
• Support and respond to audit requirements and findings.
• Perform assessments of compendial updates and implement changes to Standard Operating Procedures, Work Instructions and other GMP documents.

Requirements:

• Diploma or Bachelor’s degree in Science/ Life Science, Pharmaceutical Science or Engineering or any other relevant field
• At least 1 year of relevant working experience in GMP environment with quality control laboratory experience within the pharmaceutical/chemical manufacturing.
• Competency in analytical chemistry tools such as HPLC, root cause analysis methods and tools.

Reg No: R22104540

EA License no: 94C3609

About SLB

We are a global technology company, driving energy innovation for a balanced planet. Together, we create amazing technology that unlocks access to energy for the benefit of all.

At SLB, we recognize that our innovation, creativity and success stem from our differences. We actively recruit people with a diverse range of backgrounds and cultivate a culture of inclusion that unlocks the benefits of our diversity. We want to ensure that everyone feels a sense of belonging here and we encourage, enable and empower our people to foster inclusivity, build trust and demonstrate respect for all across the organization.

Global in outlook, local in practice - and with a united shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

In this position, you will be working on Cameron products and services. Cameron is part of the SLB product family and is a leading provider of flow equipment products, systems and services to worldwide oil, gas and process industries.

Mechanical Engineer – Product Design / Flow Control / Choke products

Job Description:

Support the Engineering Manager and SETC Engineer in checking and approving drawings/designs of Surface Product to meet customer’s requirement, Cameron Engineering and API Standards.

Support the manufacturing and refurbishment of the Flow control, Choke products, via the disposition of NCRs and RGRs. The Engineer will also be appointed as the Lead Engineer for project work, assisting the SETC Engineer.

Roles and Responsibilities:

• Responsible in assisting the Engineering Manager and SETC Engineer in troubleshooting field installation problems
• Support the goals and programs established by the management team. Included in the roles and responsibilities of the Engineer are:
• Checking and approving drawings, information and documentation which meets Cameron engineering standards to enable the manufacturing group and other departments to produce and market the Company’s product.
• Attend and initiate Design and Development Planning and Review session to meet customer’s and industry’s need.
• Guide and lead Junior Design Engineers and Designers on Engineering Design Work.
• Carrying out and direct design and development work to meet customers’ and/or the industry’s need.
• Conduct Engineering Training and Lesson Learnt sessions.
• Facilitate and/or conduct Root Cause Analysis session for SQ/PQ related incidents.
• Provide regional engineering support as instructed by Engineering Manager.
• Working and direct work within stated procedures to ensure that design records/control is maintained.
• To be capable of executing or participate in Stackup Test.
• To be capable of customer engagement.
• To be capable of performing design calculations and design analysis.
• To be capable of performing/conducting Value Engineering workshop and projects.
• To be capable of reviewing and disposing Non-Conformance or Aftermarket (RGR) product/equipment.
• Be familiar with Industrial Standards, Company products, design principles, manufacturing techniques

Qualifications and Experience

• Degree in Mechanical Engineering from a recognized university.
• Ability to produce drawings/sketches to illustrate design/idea

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Industry: Semicon Manufacturing

Salary: $3000-$4500

Job Description

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Issue and closure of CAR for customer (RMA) and Supplier issue – External
• RMA receipt and disposition of RMA in Macola – External.
• Work with QA department and Engineering on customer related issues e.g. RMA

Requirements:

• Degree / Diploma in Engineering (Electrical Engineering, Mechanical Engineering, etc).
• Knowledge of CMM, profile projector, and measuring equipments.

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368