As a Motion Control Engineer of Halliburton Wireline Technology team, under broad guidance, you will be responsible for Motion Control firmware design and development of new product and enhancements, verify and validate firmware through integrated testing at module, product and system levels. You’ll also be involved in field testing support, manufacturing release roll-outs of the new products.

Job Roles

- Analyse system & subsystem motion control requirements, identify firmware features, break down task lists and provide schedule estimations.

- Lead and implement board level firmware development, debugging and testing activities including algorithm, communication, and system firmware development.

- Participate in board, product and system level product integration, verification and validation. You’ll be working with multi-discipline function test members onsite and/or offsite proactively and positively to achieve smooth development progression and effectively issue resolutions.

- Document firmware design and qualification reports as per compliance requirements and fulfilling project life cycle gate reviews.

- Support manufacturing production in firmware related activities.

Job Requirements

- Electrical/electronic degree or equivalent.

- Minimum 2 firmware hands on experience with C/C++/Assembly programming.

- Familiar with DSP/MCU microprocessor architectures. Experience on peripheral driver development like SPI, I2C, UART, etc.

- Hands-on experienced at least one product cycle of implementing PMSM/BLDC control.

- Knowledgeable in using laboratory equipment that is used for control system debugging and verification.

- Experience on data acquisition with on-board ADC/DACs.

- Communication protocol development experience with bus like CAN, 1553 and Ethernet is added advantages.

- RTOS experience will be a good plus.

- Experience on digital signal processing for application like digital communication is an added plus.

- Matlab/Simulink – Embedded Coder for automatic code generation is an added plus.

Self-initiative, independent and a good team player

Your primary responsibility will be to gather, analyze, and report on various service-related data to support decision-making processes within the organization. You will play a crucial role in providing insights and recommendations to improve service quality, efficiency, and customer satisfaction.

Key Responsibilities:

• Prepare and churn daily, weekly, monthly, or quarterly reports (as appropriate) stipulated by Customer’s Contract obligation; or at agreed time intervals, through the analysis of data, past trending records and Service Management Reviews
• Recommend areas of improvement that support Customer’s business requirements through gap analysis and periodic reviews; initiate Service Improvement Plan (SIP) as appropriate
• Ensure that data published is unchanged from creation to reception; by upholding to act with integrity and ensure that all data extracted and published are treated as Confidential
• Generate reports with accuracy, determine classifications by identifying trends, clarifying inconsistencies, and monitoring progress periodically
• Commitment to fulfill, ensure correct and accurate, valid data is published and timely delivery of Customer deliverables
• Perform integrity and quality analysis on data prior to publication, ensuring that business standards and customer expectations are being maintained
• Prepare and manage operational reports to improve the overall performance of the support teams; and highlight the pain points in the operational process
• Articulate and document the Service Level Agreement (SLA), and Operational Level Agreement (OLA) deliverables to achieve the outcomes expected by both AsiaPac and the Customer
• Propose reporting templates based on reporting requirements/descriptions per the Customer’s Contract schedule; ensure that access to the data sources is set up in order to produce the reports
• Work closely with the Operations and Service Delivery Teams to identify and define, value-add to existing reports, and discuss the structure, as required
• Support to deliver ad hoc reporting and analytics requirements to both customer and internal/senior management
• Contribute and support governance improvement on policies, standard ITIL processes, and procedure adoption, review and update related documentation; develop and maintain standard operational and service delivery templates, report procedural and work instructions documentation
• Support internal audits to ensure compliance with certified standards (e.g. ITIL, OSPAR)
• Take up and to lead small/medium projects or initiatives to improve the processes and toolsets
• Good understanding and familiarity with IT Operations background

Requirement / Pre-requisites:

• Proficiency in Microsoft Excel functions (Pivot tables, vLookUp, Conditional Formatting, Mixed Type Charts, Array Formulas, Macros, Microsoft Power Add-ins, etc…); familiar with using Power BI as an added advantage
• ITIL certified an added advantage
• Knowledge of Auditing Standards ISO20000, Quality Management System ISO9000 an added advantage
• High level of personal commitment, proactiveness, and sense of responsibility
• Demonstrate problem analysis and solution formulation ability
• Excellent customer service orientation and ability to communicate clearly; is meticulous and possesses good report-writing skills

Qualifications and Skills:

• Bachelor's degree in Computer Science, Statistics, Mathematics, Economics, or a related field.
• Proven experience as a Data Analyst or similar role, with a focus on service-related data analysis and reporting.
• Strong analytical and problem-solving skills with the ability to think critically and draw insights from complex datasets.
• Excellent communication and presentation skills, with the ability to convey technical information to non-technical stakeholders effectively.
• Detail-oriented with a high level of accuracy in work output.
• Ability to work independently and collaboratively in a fast-paced environment.
• Familiarity with service management concepts (e.g., ITIL) is a plus.

Responsibilities:

• Establish and enhance the company's business procedures and risk management system.
• A due diligence examination of loan operations conducted on-site.
• In charge of business follow-up inspections.
• In charge of overseeing the Company's debt collection efforts
• In charge of ensuring that the company's operating system complies with applicable laws and regulations.
• Encourage staff performance in the sales team to achieve the objective.
• In charge of overseeing the risk control system training.
• Conduct risk control meetings on a regular basis.
• Establish backup plans for handling financial emergencies.
• Create risk and position reports.
• Assist in executing plans and solutions.
• Inspect the company's risk exposures.
• Cooperate closely with other business partners.

Requirements:

• A degree in finance, banking, business studies, economics, commerce, or equivalent
• At least 5-8 years of experience controlling credit risk
• Certification as a Professional Risk Manager (PRM) is advantageous

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1654399

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description

- Responsible for coordination, execution, and implementation of key microbiology and food safety programs for the site, including Raw Material Sampling Plan , Finished Product Sampling Plan, Environmental Monitoring and other food safety initiatives and certifications,.

- Ensure all products produced at this site meet all local and federal regulations and is safe and wholesome

Job Requirements

- Ensure GMP and food safety requirements and policies are implemented and respected

- Develop , implement, maintain and coordinate food safety programs (FSSC22000, HACCP,

Environmental Monitoring, Pest Management, Raw material and Finished Products

Sampling Plan) for the production facility

- Support the implementation of corrective actions associated with identified gaps (both internal and external)

- Ensure data is entered into the Quality documents accurately and in a timely manner

- Work closely with Supply Chain to ensure incoming ingredients, chemicals and packaging materials are sampled, inspected, and approved for use in the plant

- Lead third party and internal audits and their preparation and follow up (FSC22000,Customer and Regulatory)

- Provide support to correct key food safety complaints

- Ensure processing techniques and SOPs in the production are being followed

- Identify risk in production area, review safe work routine and ensure it is well implemented

- Quality assessment of in-process and finished products

- Ensure the plant is always compliant with company and legal procedures and policies

- Ensure the plant quality and food safety systems are always ready for an audit

- Committed to ensuring that the products produced meet all food safety and quality requirements

• Plan and manage regulatory submissions in SG.

• Plan and support regulatory submissions in our regional markets.

• Compile registration dossiers and ensure timely submission to the authorities.

• Perform duties of Responsible Person as per HSA guidelines.

• Maintenance of registered importer’s, wholesaler’s, product licenses and support activities to ensure compliance.

• Manage activities related to Quality Assurance, Pharmacovigilance and adverse events reporting.

• Achieve the targets set and account for ADVAGEN's regulatory submissions and activities.

• Provide updates and reports of the above duties and responsibilities.

• Support other projects that may be assigned by the Director including tenders, marketing and new products.

Job Position Summary

• Regulatory Strategy & Line management
• Regional position in MNC
• Medical Devices - Low to High Risk Class

Main Responsibilites

• Manage the submission of documents and handle inquiries from regulatory authorities in assigned regions.
• Develop and execute effective strategies for securing regulatory approvals
• Enhance regulatory processes and implement a system for managing regulatory information.
• Support regulatory aspects during due diligence processes and stay updated on new regulations.
• Analyze regulatory data to gain competitive insights.
• Foster collaboration among departments, providing regulatory expertise and leading regional projects.
• Act as the primary internal regulatory/quality contact, assisting in-country teams and distributors.
• Handle post-marketing quality issues e.g. product complaints/recalls, audits, coordinating FSCA, QMS management and regulatory reporting.

Application Requirements

• Minimum of 5 - 8 years' experience in regional regulatory affairs in medical devices or IVD.
• Bachelor's degree in Pharmacy, Life Sciences, or a related scientific field.
• Thorough familiarity with the global regulatory landscape.
• Strong multitasking and project management skills, coupled with effective communication and collaboration abilities.
• Experience with leading at least 1 other executive will be advantageous.

Interested Applicants

Interested candidates should submit an updated resume that highlights relevant experience and qualifications.

Not the right opportunity?

We're always looking out for the best talents in the life science industry. If you are currently seeking exciting opportunities within the pharmaceuticals, medical devices, in-vitro diagnostics (IVD), or consumer health industry, do reach out for a confidential chat.

Principal Consultant: Cheong Yee Yin | Registration Number: R22108633 | EA License Number: 17C8502

• Generate test plans and test reports for functional and/or performance testing.
• Reevaluate defects through retesting and analyze the outcomes.

Requirements:

• Diploma in IT or equivalent.
• At least 2 years of automation testing experience using Selenium.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

• Maintain and update documents and records on ISO 9001, ISO 14001 AND ISO 13485 system
• Establish and maintain proper documentation control & distribution
• Conduct internal and external audits. Ensure readiness of all sections for both 3rd party certification body and customer audits.
• Liaise with external auditors and certification bodies in conducting audits
• Generate monthly report/summary of OQA rejects, customer returns, RMA, external and internal 8D and revised specs and procedures.
• Review and update Quality Management System procedures to meet the quality system requirements.
• Ensure system compliance & preparations for Management Review
• Review audit findings and develop action plans
• Manage internal and external corrective action reports (CAR)
• Plan and conduct periodic system audits and participate in customer or supplier audits for compliance.
• Maintain and conduct regular review of calibration and preventive maintenance for instruments and equipment.
• Direct and head internal audit programs by reviewing procedures, while recommending improvements for all internal audit policies and procedures
• Perform any other duties, as assigned by superior.

• Conduct in-depth analysis to identify emerging technologies, trends, and industry best practices related to building automation and control systems.
• Stay updated on the latest advancements in control algorithms, software platforms, hardware components, and integration protocols.
• Develop and implement software applications for control systems, including programming, coding, and scripting. Create algorithms and logic to optimize system performance, energy consumption, and occupant comfort. Utilize programming languages, Matlab, Python as well as automation platforms Schneider or Tridium Niagara.
• Conduct thorough testing and validation of control system components, software applications, and integrated solutions. Perform simulations, modeling, and hardware-in-the-loop testing to verify system functionality, performance, and reliability.
• Develop prototypes and proof-of-concept solutions to validate new ideas, concepts, and technologies.
• Collaborate with internal and external stakeholders, including engineering teams, project managers, clients, and vendors. Coordinate and manage POC projects, ensuring deliverables are achieved within specified timelines and budgets.
• Prepare technical documentation, including design specifications, test plans, research reports, presentations, and user manuals. Communicate research findings, project updates, and technical recommendations to both technical and non-technical audiences.
• Design and architect control systems for building automation, including HVAC (Heating, Ventilation, and Air Conditioning), lighting, security, access control, and energy management. Define system requirements, specifications, and performance metrics.

Job Description

• Act as backup for GPS monitoring and preparation of GPS report
• Act as backup for CCTV monitoring and preparation of input into the CCTV monitoring reports and coordinate between the operations team
• Attend all other various periodic meetings and audit requirements of all oil majors
• Attend and assist ISO preparation and audits
• Attend all incident investigations and coordinate recommendations, suggestions and closure
• Coordinate and prepare monthly closing reports of all oil majors
• Coordinate and manage all safety meetings, toolbox meetings and other various paperwork
• Coordinate and ensure gap closure arising from various audits
• Ensure up to date keeping of all oil majors, operations and management systems
• Plan, organize and support all company’s safety programme, campaigns and events.
• Other ad hoc duties as assigned by your supervisor

Requirements:

• Proficient in Microsoft Office
• Strong communication and interpersonal skills
• Graduates without experience are welcome to apply as on job training will be provided

Working location:

Joo Koon

Working hours:

Mon - Fri 8.30am to 5.30pm &

Sat 8.30am to 12.30pm

Please contact 8820*9727 for more details.

We regret that only shortlisted applicants will be notified

Job Description:

• Carry out duties and responsibilities in accordance to the Building Control Act as the Qualified Site Supervisor (RTO) on record for the supervision of the works
• Work with the Resident Engineer and his representatives and be responsible for enforcing specification and code
• Assist RE to review and approve design calculations and drawings at site
• Proactive in providing periodic site progress update
• Maintain and control site records as per required
• Ensure appropriate and consistent documentation of inspection and test, to be in conformance with regulations set forth by BCA
• Arrange and witness Factory Acceptance Tests and Site Acceptance Test
• Conducts inspections and certify value of work completed for RE’s recommendation for Contractor’s progress payment to be made
• Liaise with all parties involved in the project

Job Requirements:

• Minimum Diploma in Electrical /Electronic/Instrumentation and Control Engineering or equivalent
• At least 5 years of experience in site supervision works, preferably in Odour/Water/Wastewater Treatment Plant Project
• IT literate and possess good record-keeping skills
• Self-starter, diligent and ability to work in a team

Responsibilities

• Driving Tester shall conduct all practical driving/riding tests for ALL Classes of driving licences i.e. Class 2B, 2A, 2, 3, 3A, 4, 4A and 5 (the “Tests”) in accordance with the Driving Tester Instruction Manual and all relevant Standard Operating Procedures (SOPs) including the practical test marking guides of the Authority.
• To conduct invigilation of all theory Tests (Basic, Final, Riding and Instructor Theory Test) in accordance with the Driving Tester Instruction Manual and all relevant Standard Operating Procedures.
• Driving Tester shall process the marking of theory Test answer scripts using an Optical Marker Reader for paper-based theory tests whenever the computerised test theory system is down or for oral theory tests.
• To maintain an Official Tester Diary in the form and format
• To ensure proper turnout and bearing when on duty (e.g. to wear proper Tester Uniforms with name tag, and black colour shoes).
• To maintain the highest standards of personal conduct and professionalism when on duty as they represent the Authority at the workplace.
• Driving Tester shall maintain a driving licence demerit point record of no more than 12 demerit points

Requirements

• Have a minimum 3 GCE 'O' Level credits or NITEC Certification, or relevant job experience as a driving instructor or tester
• Have at least a valid Singapore Class 3 Driving Licence and more than 3 years of driving experience
• Be at least 25 years of age
• Have a good driving record with not more than 6 demerit points* based on the date of the Authority’s screening, on his latest driving records, and no criminal records;
• Have good interpersonal and communication skills (preferably fluent in English language and at least one of the following languages: Mandarin, Malay or Tamil)
• Basic knowledge in MS Office programs such as MS Word and MS Outlook
• Basic knowledge of mechanical functions of motor vehicles; and
• Passing of Trade Tests conducted by the Traffic Police within 2 attempts

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

1. Work as owner’s engineer to lead the electrical team for project implementation at site.
2. Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
3. Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
4. Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
5. In depth of understanding for electrical power automation for electrification of WtE project.
6. Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project.
7. Familiar with SS638 requirements on electrical installations in Singapore.
8. Having multi-discipline coordination attitude in execution of electrical works.
9. Basic knowledge of instrumentation and control equipment for site works.
10. Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
11. Engage in site meetings with technical discussion contractor and client.
12. Joining site inspection for contractors works.
13. Participation of FAT and SAT of electrical equipment.
14. Ability to use Navisworks to review 3D BIM Model for routing of site utilities.

About Ashurst

Ashurst is a leading progressive global law rm with a rich history spanning more than 200 years. We are proud of our history and are future-focused, having expanded into new technologies through our NewLaw division, Ashurst Advance, and our consulting arm. Our in-depth understanding of our clients and commitment to providing excellent standards of service have seen us become a trusted adviser to local and global corporates, financial institutions and governments in all areas of commercial law. To find out more please visit www.ashurst.com.

Department / Role overview

Working as part of our Global Risk & Compliance Department, the Conflicts &

Ethics Team is responsible for analysing all new clients and matters to identify and resolve legal and commercial "conflicts of interest".

The role is ideally suited to an individual with a clear and confident communication style, and a desire to work collaboratively with a dynamic and motivated team. The successful candidate will have a keen eye for detail and an interest in current affairs. A legal qualification is not essential, but problem solving and professionalism are key. You will work alongside colleagues from Glasgow, London, Perth and Sydney, to provide conflicts clearance as our partners and clients pursue the most exciting deals across the globe.

Main responsibilities

• Develop and maintain knowledge ofthe rules of professional conduct applicable across the countries in which Ashurst lawyers practise
• Use your research skills to identify and verify clients, third parties and assets involved in new business requests
• Develop and apply your understanding of legal transactions to determine the relationships between parties involved in a particular matter; and if in doubt, liaise with the partners and lawyers
• Analyse information in the firm’s conflict management systems and other databases to identify any potential conflicts of interest
• Work collaboratively with team members and Senior Management to find solutions to potential legal and commercial conflicts
• Record excellent phone notes, legal and commercial analysis to serve as a record of compliance for our insurers, regulators and rm management
• Maintain the highest standards of data quality within the conflicts database.

Other tasks

• Work across function groups (Finance, HR, IT, Business Development) to tackle projects and solve problems
• Take advantage of our continuous professional development opportunities and carefully planned career development
• Assist in preparing and delivering training and other compliance education sessions for the business
• Risk and Control: Ensure that all activitiesand duties are carried out in full compliance with our regulatory requirements and internal policies

Essential skills and experience

• Prior experience within Risk & Compliance ideally within a professional services/corporate environment
• An interest in the work undertaken bya corporate multinational firm
• A desire to understand the business and work closely as a team to solve problems
• Strong organisational skills, attention to detail and able to work well under pressure
• Strong IT literacy and the ability to adapt to new processes and technology quickly
• Strong interpersonal skills required to engage all levels of legal and support staff
• The discretion required to maintain confidential information appropriately

Desired skills and experience

• Good judgement and business awareness
• Use of legal, business search engines and databases

Background checks

In order to comply with regulatory and client requirements, Ashurst will undertake

appropriate vetting of staff. When applicants accept a job offer, Ashurst, alongside a specialist provider, will undertake professional verification and background checks. These checks are only undertaken with consent, and in accordance with our legal and regulatory obligations.

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry. Learn more at prattwhitney.com.

Responsibilities

• Set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection and document results in accordance with procedures.
• Familiar with the scope and limitations of the method in which certified and as directed, be capable of providing the necessary guidance to trainees and Level 1 personnel.
• Familiar with the codes, standards, and other contractual documents that control the methods including the scope and limitations of each technique/method.
• Conduct system performance checks in accordance with applicable process standard.
• Develop and manage procedures and inspection technique (sheets) for NDT Level 3 approval.
• Carry out any other duties as assigned.

Requirements

• Minimum Diploma in Mechanical Engineering, Electrical Engineering or any other related discipline.
• Possess at least 400 hours of performing FPI (Fluorescent Penetrant Inspection)-Aerospace and at least 2 year of experience in dealing with aircraft structures, engines and/or components, or acceptable alternative training or experience.
• Pass the near vision eye test at Snellen 20/25, Jaeger 1 or its equivalent and the colour perception test.
• Possess experience in P&W FPM Code 07 and ASTM 1417 Type 1 D4 a/d specifications.
• Possess certification of a current NAS410 / EN4179 / PCN / ASNT or SNT-TC-1A.
• Possess basic knowledge of product manufacturing, inspection technology and aircraft engine maintenance.
• Possess good working knowledge of MS Office application (Word, Excel and PowerPoint) and possess working knowledge of SAP.
• Good team player with strong written and verbal communication and interpersonal skills.
• Highly motivated and able to work independently.
• Must be able to work under pressure and thrive in a dynamic and fast-paced work environment.
• Able to display Continuous Improvement and multi-tasking competencies.

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together

Your Role

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• To participate, work closely and give support to safety personnel at site on all initiatives/ matters relating to Safety and Health
• To comply with the Company Safety Management System and the WSHA and its subsidiary legislation

The Requirements

• Possess a Degree in Civil Engineering or its equivalent
• Minimum 3-5 years of relevant working experience in construction industry
• Must be technically inclined and possesses excellent problem-solving
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and construction teams

We are currently working with a German MNC client; looking for a Vulnerability Analyst with cybersecurity work experience to join them.

Vulnerability Analyst

Responsibilities:

• Proactively prevent security issues by identifying and addressing vulnerabilities
• Identify, prioritize, and track findings. The successful candidate will have the opportunity to attack any and all internally reachable systems of a global company. This cross functional position will work closely with many different departments in order to address found security issues.
• Work with scanning tools to identify vulnerabilities
• Manually verify and identify vulnerabilities
• Prioritize vulnerabilities
• Continuously improve the automation process
• Support asset owners in understanding vulnerabilities and selecting appropriate remediation measures
• Track vulnerability remediation
• Stay up to date with current cybersecurity trends

Requirements:

• Bachelor degree in Information Technology with 2- 3 years of professional experience in relevant field
• Knowledge of common vulnerabilities, exploits, and attack methodologies
• Knowledge of appropriate remediation measure
• Basic understanding of the vulnerability management process
• Familiarity with coding/scripting languages such as Python, Javascript
• Experience with security assessments or penetration testing
• Effective communication skills in English with different stakeholders
• Interpersonal and intercultural skills to work with different stakeholder

Proficiency in the following:

1. Red team (Penetration testing, hacker)
2. Scripting Language Python
3. Vulnerability knowledge
4. Operating system (Linux, windows, servers)
5. Addressing and communicating vulnerabilities to non-technical users
6. Remediation knowledge
7. Working in development and operational cloud environment

Other Info:

• Salary: Up to $8000
• Employment Type: Permanent
• Work location: Bendemeer

EA Personnel Registration No: R1113411

Our client is from Oil and Gas industry. They are looking for a C & I Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Responsible for Yokogawa DCIS, SIS, and FGS support to ensure safe operations.
• Installation, troubleshooting, and maintenance of automation systems.
• Manage vendor contracts and provide technical training.
• Develop and maintain maintenance procedures and documentation.
• Execute projects related to automation and plan for system lifecycle.
• Lead Cyber Security compliance and conduct risk assessments.
• Offer expertise in OT cyber-security projects.

Requirements:

• Min Degree in Computer, Electrical Engineering or any relevant field.
• Min 4 years of working experience in Oil and Gas and utilities or any relevant industry.
• Experience in ISO27001 and IEC61508 will be anadvantange.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Job Description:

• Checking daily incoming payments and identifying failed collections
• Call and follow up with Hirers that are in default
• Issuance of 4th/5th schedules to Hirers
• Arranging for repossession of vehicles
• Arrange for tender auctions of vehicles
• Liase with lawyers for litigation and following up with the company's solicitors in enforcing legal action against debtors
• Handling customers' enquiries on repossessed vehicles and redemption cases.
• Handling disposal of repossessed vehicles.
• Handling the recovery of shortfall after the disposal of vehicles from tender sales.

Job Requirements:

• 1-2 years of credit control experience will be advantageous
• Organized, meticulous and systematic
• Able to communicate well at all levels
• Pleasant personality with strong interpersonal skills and good command of written and
• spoken English and Chinese (to handle queries from Chinese speaking clients)
• “New to Industry” are welcome to apply
• Interest in automotive industry

Working Hours:

• Monday to Friday- 0845am-0545pm
• Alternate Saurdays- 0845am- 1245pm
• 5.5 days work week (alternate Sat off)
• Pay range $2500 onwards

Job Benefits:

• Competitive salary
• Annual, Birthday and Marriage leave
• Dental Claim
• Daily lunch provided
• Health insurance upon confirmation
• Annual bonus (depending on performance)
• Staff rate for car rental and trading of cars
• Provision of usage of car (depending on performance)
• A casual work environment and a fun-loving team

• Develop and update automated test cases, test plans, and test framework to align with requirements and policy changes.
• Conduct a variety of tests, including manual, functional, performance, and exploratory tests, to support User Acceptance Testing (UAT).

Requirements:

• Degree in Computer Engineering or equivalent
• At least 3 years of experience of quality testing with hands-on automation.
• Proficient in CI/CD.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Job Purpose

You will report to the Risk and System Assurance Manager, Thomson East Coast Line Safety, Security & Quality Office (TEL SSQO) where you will assist on (1) risk and hazard management; (2) Operation Safety Submission audits; and (3) Workplace Safety & Health related matters.

Responsibilities

• Assist STEL in coordinate, track, follow up and report on risk management and WSH risk assessment matters
• Assist Risk and System Assurance Manager in OSS Preparation
• Assist Risk and System Assurance Manager in hazard log preparation or review
• Assist Risk and System Assurance Manager in reviewing modifications in terms of safety towards O&M
• Able to liaise with relevant STEL O&M branches where necessary
• Supporting TEL Safety, Security and Quality branches whenever relevant and required
• Proficient in using Microsoft offices

Qualifications & Work Experience

• Degree in engineering with 2/3 years’ experience working in safety or quality.

Skills

• Additional experience in risk assessment and/or ISO 9001 will be a plus.

Your role

We’re looking for someone like that to:

– review and process incoming documents/static requests for clients

– provide client advisors support with document/static requests management

– ensure that the document/static requests records correspond with data in the system

– offer advice and support to client advisors and middle office (e.g., Legal and Compliance) when carrying out administrative tasks in connection with client care, like blocking of accounts, temporary unblocking review, client attributes static changes and internal account static changes

You have:

– a university degree in business or engineering, preferably with some programing experiences.

You are:

– a self-starter who can work well with minimal supervision

– methodical, concise and accurate, with strong attention to detail

– comfortable working independently, as well as in a team-oriented, collaborative environment

– a strong communicator, comfortable interacting with colleagues at all levels

– results-oriented worker, with the ability to set priorities

Job Description:

• Checking daily incoming payments and identifying failed collections
• Call and follow up with Hirers that are in default
• Issuance of 4th/5th schedules to Hirers
• Arranging for repossession of vehicles
• Arrange for tender auctions of vehicles
• Liase with lawyers for litigation and following up with the company's solicitors in enforcing legal action against debtors
• Handling customers' enquiries on repossessed vehicles and redemption cases.
• Handling disposal of repossessed vehicles.
• Handling the recovery of shortfall after the disposal of vehicles from tender sales.

Job Requirements:

• 1-2 years of credit control experience will be advantageous
• Organized, meticulous and systematic
• Able to communicate well at all levels
• Pleasant personality with strong interpersonal skills and good command of written and spoken English and Chinese (to handle queries from Chinese speaking clients)
• “New to Industry” are welcome to apply
• Interest in automotive industry

Working Hours:

• Monday to Friday- 0845am-0545pm
• Alternate Saurdays- 0845am- 1245pm
• 5.5 days work week (alternate Sat off)
• Pay range from $2500 onwards (depending on experience)

Job Benefits:

• Competitive salary
• Annual, Birthday and Marriage leave
• Dental Claim
• Daily lunch provided
• Health insurance upon confirmation
• Annual bonus (depending on performance)
• Staff rate for car rental and trading of cars
• Provision of usage of car (depending on performance)
• A casual work environment and a fun-loving team