Responsibilities:

• Applying the requirements of the Site Quality Plan in its area/ specific discipline and controlling the quality of Works performed
• Executes the specific inspections on materials, equipment and construction/installation activities on site.
  Ensure the full implementation of Project Quality Plan under civil work phase
• Ensure compliance to Client specifications for fabrication, construction and pre-commissioning where required
• Orderly collect, check and manage documents certifying tests, controls and inspections carried out witnessing the tests, controls and inspections carried out
• Develop Quality Control Work Progress Reports
• Checking that the Subcontractor Quality team performs each of its activities taking into account the specific quality requirements.
• Getting from each Subcontractor all certificates and inspection records requested
• Verifying that the documents are complete, and initiating the corrective actions if required
• Ensure the correct implementation of the approved Inspection Test Plan according to Client’s requirements
• Ensure inspection and test equipment is serviceable, with in calibration period and personnel are knowledgeable in its use
• Ensure blast medium and coating materials conform to project specifications
• Ensure surface preparation blast profile/cleanliness meet requirements,
• Monitor wet film thickness during application and application technique.
• Ensure ambient conditions are acceptable for required process output.
• Monitor dry film thickness and re-coating intervals.
• Ensure any identification marks or tags removed or over coated are replaced.
• After the full curing activity conduct visual inspection and specified non-destructive and destructive tests.
• Prepare daily reports on the work in progress.
• Carry out any other duties as and when required by the supervisor.
• Responsible for timely inspection during fabrication and construction, proactive in the prevention of non-compliance and problem resolution.
• Witness and monitor contractors welding activities, inspection and test in accordance with the approved Quality Plan, ITP, Quality Procedures and etc.
• Promote quality awareness throughout the organization, emphasizing excellence, continuous improvement and corrective action to influence the overall success of company business.
• Assist review of company Quality Plan, Inspection &Test Plan (ITP) and Quality Procedures and all pertained QA/QC documentation prior to commencement of any fabrication / construction work.
• Ensure testing, measuring, welding, NDE equipment is fully calibrated per specification and has current certification.
• Ensure testing, measuring, welding, NDE equipment is fully calibrated per specification and has current certification.
• Supervision of erection of pipe spools and pipe supports according to drawings
• Responsible for planned progress schedule and maintain quality and safety
• Daily and weekly reports of site progress in line with project schedule
• Will report to the Quality Supervisor and handle all jobs independently

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent
• At least 5 years of work experience in Oil & Gas construction sites
• Experienced in hydro tests
• Knowledge in piping and mechanical works, structural fabrication
• Diploma/Bachelor Degree in Mechanical EngineeringCSWIP, AWS, HNC, HND, or NVQ certification.
• Fluent in English.
• Advanced knowledge of TIG, MIG, laser, butt, and arc welding techniques.
• Ability to read and interpret blueprints.
• Observant and analytical.
• Good communication skills.
• Knowledge of health and safety practices.

Location:

• Jurong Island

Duration:

• 60 hours per week (6 days work-week)
• 1 year contract, renewable

Job Description

• Industry / Organization Type: Manufacturing
• Position Title: QC Engineer / Quality Control Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Work with Process Engineer & Engineering team on QC requirement
• Document inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

APPLY NOW!!!

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirements in PCB Assembly, quality requirements of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with overseas suppliers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description:

- Responsible for coordinating the Incoming Quality Assurance team on policies, procedures and implementations to ensure product and service quality.

- Supervise daily operation of IQA Section

- Review Inspection Control Plan and First Article Reports

- Request to perform source inspection at suppliers' site

- Coordinate Spare Nonconformance Action (SNCA) Disposition when nonconforming material found

- Liaise with Procurement, Operations and Supplier to resolve Quality Issues

- Participate in Supplier Quality Audit

- Participate in Quality Improvement Activities

- Develop and Maintain Quality Information Systems

- Generate Weekly and Monthly Quality Report

- May perform other duties as assigned

Job Requirements:

- Degree in any Engineering or Science discipline with working experience in QA or Engineering is preferred

- Good communication skills

- Well verse in Microsoft office

At AIA we’ve started an exciting movement to create a healthier, more sustainable future for everyone.

It’s about finding new ways to not only better people's lives, but to better the communities and environments we live in. Encompassing our ambition of helping a billion people live Healthier, Longer, Better Lives by 2030.

And to get there, we need ambitious people who believe in playing an important part in shaping that future. People seeking unmatched career and personal growth opportunities, who are driven to work with, and learn from some of the most inspiring and supportive leaders in the business.

Sound like you? Then read on.

About the Role

- Support Head, Customer Service in driving digital transformation and self-help tools at service touch points in Singapore and OSS Contact Centre with - Compliance and Operational Risk in mind.

- Responsible for designing “as if” and “to be” in customer experience journey on transformation tools.

- Collaborate with internal/external stakeholders and spearhead in implementing digitalization and self-help capabilities to achieve Corporate Solutions’ goals and vision in Joyous CX.

- Drive e-portals utilization rate, focus on accuracy and quality of contents and increase customer satisfaction ratings.

- Develop and implement customer centric strategies and framework to deliver consistent high standard and quality service to our customers and business partners.

- Support investigation of complainants escalated to Customer Service section and communicate investigation findings/outcome to complainant/business partners within the required turnaround time.

- Attend to enquiries/feedback received at the various customer service touch points.

-Use of data to identify and recommend any process/operational enhancements or new service propositions to improve customer service and experience.

- Support Section Head in implementing and maintaining a centralized knowledge library as source for future omnichannel servicing portal.

- Performs other responsibilities and duties periodically assigned by Section Head in order to meet operational and/or other requirements.

Build a career with us as we help our customers and the community live Healthier, Longer, Better Lives.

You must provide all requested information, including Personal Data, to be considered for this career opportunity. Failure to provide such information may influence the processing and outcome of your application. You are responsible for ensuring that the information you submit is accurate and up-to-date.

• Generate test plans and test reports for functional and/or performance testing.
• Reevaluate defects through retesting and analyze the outcomes.

Requirements:

• Diploma in IT or equivalent.
• At least 2 years of automation testing experience using Selenium.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Main Responsibilities:

• To prioritize and perform the various testing/analysis in timely manner, in order to support the business requirements.
• Analysis of bulk product, in-process, raw material or environmental samples according to Standard Operating Procedures and Test Methods.
• Documentation of results in accordance with current Good Manufacturing Practices (cGMP).
• Problem solving of analytical methods as well as troubleshooting of equipment. Involvement in method transfers and validation.
• Involved in equipment qualification and technical selection of QC equipment and/or standards and reagents.
• Assay trend analysis, document revision and update.
• General lab support including housekeeping, equipment maintenance, inventory of supplies, lab supplies ordering, management of glass wares, autoclaving etc.
• Any other duties as assigned by your Supervisor/Manager.

Job Requirements

• Degree/Diploma in a relevant Chemistry, Science field or Equivalent.
• Relevant work experience preferably with Lab experience in a biotech or medically related field.
• Good understanding of HPLC and Empower software.
• Well versed in cGMP regulations.
• May require working on 12 hours shift.

Interested candidates please send in your resume to [email protected]

Attn : Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd, EA License No.: 99C4599

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Are you an experienced Red Team / Penetration Tester looking for a cutting edge network-centric red team role at a global tech product company? Don't miss this opportunity.

Our client, a large tech company with operations in Singapore, is now looking for a 5+ year skilled penetration tester to join their mission to provide world class network security to millions of end users.

We're looking for you!

• Are you a problem solver with a keen eye for security weaknesses? We want you on our team.
• We need someone who isn't afraid of change and can ask the tough questions when needed.
• Clarity and effective communication are a must—you won't settle for anything less.
• With an offensive security mindset, you're always ready to find and address vulnerabilities.
• Collaboration and knowledge-sharing are key—mentoring others and embracing new ideas is part of the job.

Your mission:

As a senior member of our offensive security team, you'll take on exciting and diverse responsibilities:

• Lead / collaborate on penetration testing projects across various global locations, working with a wide range of technologies.
• Utilize white-box testing to identify bugs in source code, bringing solid organization and communication skills to deliver successful penetration tests.
• Work closely with engineering teams to provide expert guidance on vulnerability remediation.
• Verify the existence of new vulnerabilities, triage bug bounty reports, and create innovative attack strategies.
• Manage and oversee penetration testing services by outside vendors, from start to finish.
• Tackle complex security challenges with creative solutions and provide security reviews on technical design documents.
• Share your knowledge and support team members through mentorship and guidance.
• Drive workflow improvements by identifying inefficiencies and championing effective solutions.

If you're ready to take on an impactful role where no two days are the same, we want to hear from you. Join us and be part of a dynamic team dedicated to solving complex security challenges.

You'll bring to the table:

• Experience: Identifying vulnerabilities, misconfigurations, and deviations from best practices within applications using tools like Burp Suite, AFL, and more.
• Skills: Analyzing application binaries, shared libraries, and browser extensions through the use of debuggers and reverse engineering tools to understand their security posture.
• Languages: Writing scripts in languages such as Python, bash, or Golang to demonstrate proof of concepts.
• Leadership: Providing mentorship and guidance to team members while sharing knowledge and findings.
• Knowledge: Demonstrating strong knowledge of TCP/IP, IDS/IPS, firewalls, WAF, web content filtering, and cryptography such as PGP, SSH, PKI.

If this sounds like you and you're keen to make a global impact through your work.. all while enjoying competitive compensation and benefits, submit your application now. Alternatively, email [email protected] for a confidential chat and a direct line.

Interview slots are already booked, for a seamless process.

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

We are seeking a highly motivated candidate for the position of Tester

Job Duties and Responsibilities:
1. Understand functional requirements, ability to articulate and document user requirements and participates in review sessions with key stakeholders
2. Conduct review/ walkthrough sessions with key stakeholders (e.g. Product GTS, Operations BAU and Technology teams) for the following documents:
a. User stories
b. Functional specifications documents
c. Test plan and test cases
d. Roll-out training material
3. Execute UAT cases, analyze issues encountered in UAT and provide UAT status reports to project stake holders
4. Participate in the pre-implementation preparation and post-implementation support exercises including end-user live verification during roll-out.
5. Ability to provide test support across the regional offices (SG, HK, MO, TW, AU, UK, ID, IN, CN, KR) when needed
6. Ability to handle testing for multiple project deliverables concurrently
7. Ability to lead and manage a team of testers, provide knowledge support to testers where required.

Requirements:

Testing experience and UAT

Interested applicants may submit your detailed resume to [email protected] in MS Word format.

We regret to inform that only shortlisted candidates will be contacted.

EA License No. 01C4394 • RCB No. 200007268E • EA Registration No. R1329705 (Lopez Geraldine Pascual)

Job Purpose

The internship will provide an opportunity to learn the aspects of Compliance and Anti Money Laundering.

Job Responsibilities

The incumbent will assist the Compliance Team in:

• Supporting the Business with Know Your Client (KYC) reviews of existing clients, assessing the adequacy/completeness of the KYC information, source of wealth/funds, narrative and corroboration, enhanced due diligence, transaction review, and ensuring overall compliance with Bank procedural standards.
• Supporting the Business with name screening alerts triggered for existing client relationships to ensure sanctions, Politically Exposed Persons, and adverse media screenings, whether false or true matches, investigation, and escalation to the Relationship Managers;
• Assessing and escalating newly identified risk indicators, changes in risk rating, or unusual transaction patterns during reviews;
• Assisting the team in preparing statistics for Management reporting and support in projects and process improvement initiative.

Skills Required

• Proactive, meticulous, and attentive to details.
• Ability to work independently.
• Good attitude with strong organisational and time management skills.
• Strong analytical and problem-solving skills.
• Strong communication and facilitation skills.
• Interest in learning about Financial Markets and regulations.

Company: Chemical Manufacturing Company

Location: West

Position: QC Engineer (Job ID: 18812)

Working hour: Mondays – Fridays, 8.30am – 5.30pm

Job Description:

1. Reports directly to the section manager and HOD
2. Shall ensure that all supervisor(s) and technician(s) complete their testing and allocated work in a timely manner
3. Shall conducts all laboratory tests, measurement and analysis when necessary and perform checks to ensure method accuracy for the measurement and analysis
4. Shall ensure that GR&R is performed for the instruments and records are maintained
5. Shall perform troubleshooting of instruments and facilities when there is any breakdown and ensure all maintenance and calibration is performed as per scheduled and ensure reports are written
6. Shall perform validation and commissioning of new instruments and methods and maintain records of validation and commissioning
7. Shall assist in technical evaluations in accordance to direction given after discussion
8. Shall participate in customer complaints investigation (for analysis related complaint)
9. Shall troubleshoots quality issues (within department - both sections)
10. Shall maintains and updates the inventory record of all instruments/facilities parts (liaise with vendor for quotation) and ensures proper records and inventory level is maintained
11. Shall monitor (and prepares reports) on QC instruments/facilities and EHS performance through statistical reports and initiate continuous improvement projects (including operation related)
12. Shall participate in audits (internal and external)
13. Shall assist the senior engineer and QC section manager in the design of laboratory facilities / laboratory expansion if any
14. Shall ensures area housekeeping are done at all work areas
15. Shall promotes and participate in QEHS activities and ensures that all procedures are strictly adhered by the supervisors and technicians in all aspects of the activities
16. Shall understands Risk Management and ensures that the risks identified and the control measures are communicated to the supervisors and technicians
17. Shall actively participates in all quality / environmental, health and safety programs conducted by the company
18. Performs any other tasks as instructed by the senior engineer, QC section manager and HOD

Job Requirements:

1. Candidate must possess min. a Degree in Chemistry/Chemical Engineering or any other science discipline
2. Good working knowledge of quality control standards and familiar with analytical instruments like ICP-MS, AAS, IC, TOC, etc
3. Ability to communicate clearly in both writing and verbally and good interpersonal and presentation skills
4. Strong understanding of ISO9001, ISO14001 and ISO45001 standards will be an advantage
5. Proficient in Microsoft Office Tools

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Lee Xin Hui

EA Registration No: R22108046

Pasona Singapore Pte Ltd

1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246 EA License No:90C4069

Responsibilities:

• Utilize critical thinking to analyze multi-source data and trends, drawing conclusions to drive business outcomes across global programs.
• Connect operations quality gaps to process, product & behavioral issues and drive analysis and actionable projects across internal operations and product teams.
• Design and deploy analytics dashboards to monitor key business metrics, establishing baselines, targets, averages, and benchmarks, and present findings in business forums through presentations.
• Identify appropriate data sources, extract data for analysis, and independently apply analytics tools to generate insights.
• Execute or lead quality assessments on advertisement products.
• Conduct thorough analysis of assessment scores and trends in customer experience and product failure points across process, product, and operational policies.
• Provide guidance and support to vendors to maintain adherence to quality standards.
• Gather insights from various channels and amalgamate them for actionable insights.
• Translate insights into an executable plan and advocate for implementation with key stakeholders.
• Develop and implement comprehensive training programs in line with organizational objectives, collaborating with subject matter experts to create training content and materials.

Qualifications:

• Minimum 4+ years' of experience in the Quality domain, preferably within a business function or technical customer support vendor program.
• Proficient in data analytics tool (e.g. excel etc.).
• Knowledge in programming languages (e.g. Python) and visualization tools (e.g. Tableau/Power BI).
• Analytical experience solving problems using data and providing actionable business insights.
• Experience in understanding, communicating and resolving technical issues to both technical and non-technical audiences.
• Strong oral and written communication skills.
• Experience in advertisement tech/digital technology is required.

5 days work week in Jurong Island

Working Hours: 8:30am to 5:15pm

Transport Pick up from Jurong East MRT / Outram Park

Job Descriptions:

• To perform routine analysis of polymer testing & wet chemistry analysis.
• To ensure that tests assigned are performed in a timely manner in accordance with validated test protocols and procedures.
• To perform instruments’ calibrations, maintenance, and troubleshooting.
• To perform housekeeping and maintain the cleanliness in the laboratory.
• To perform inventory check & improvement idea in the lab.
• To assist superiors with non – routine study samples and any other tasks assigned

Job Requirements:

• Diploma in Chemical Process Technology / Chemical Engineering.
• Preferred candidates with min. 1 year of relevant working experience in the
• Laboratory fields (chemical / pharmaceutical industry) or fresh Poly graduates are also welcomed.
• Hands-on experience in operating laboratory equipment such as injection molding & gas chromatography will be an added advantage.
• Team player, good integrity and willingness to learn as training will be provided.
• Must be able to work overtime when required.

The Quality Inspector will plan, set-up and utilise a wide range of inspection equipment (e.g. portable coordinate measuring machine), processes, procedures, and applications to inspect all types of parts, assemblies, tools and fixtures.

The Quality Inspector will actively participate discussions across departments, Sales & Marketing / Operations / Customer Services, to review, install or modify equipment and procedures, ensuring deliverance on highest quality of products.

The position plays the role in maintaining the quality of Dedienne Aerospace’s products, therefore critical in upholding its brand and ethics.

• Ability to interpret technical drawings/blueprints and measure parts in accordance to specifications determining product acceptability
• Ability to visually and mechanically measure and inspect parts utilising inspection tools, i.e. Portable Coordinate Measuring Machine, OD & ID Micrometers, Vernier Calipers, Brinell Hardness Testing Machine, etc.
• Ability to program and operate Portable Coordinate Measuring Machine to inspect parts received from suppliers
• Conduct training for other inspectors on the operation of the Coordinate Measuring Equipment and/or other inspection tools
• Ability to write reports on inspected parts
• Upkeep condition and reliability of inspection tools to be optimal for usage
• Work closely with the Operations Director on the introduction/phase out of inspection tools
• Ability to write reliability reports on inspection tools affecting inspection operations
• Verifying, by visual and technical inspection, all incoming goods in accordance to purchase order specifications and conformance with refining practices which requires positive material identification, testing and measuring, etc.
• Tagging all incoming material required for inspection and locating
• Locating all incoming stock and non-stock material to appropriate bin locations or specified storage areas after receipt verification
• Determining methods of storage, identification, and stock location, considering commodity, dimension and weight limit, turnover, floor loading capacities, and required space
• Pick requested stock material via electronic pick lists or verbal, emergency requests and delivering to specified areas manually, in accordance to weight/body limitations, order picker, or forklift
• Packaging of stock and non-stock material in accordance to specified procedures in preparation of shipping
• Stock taking in accordance with specified area procedures to assure accurate inventories
• Compiling reports based on discrepancies due to shortages, overages, damages, or system inaccuracies
• Requisitioning warehouse stock material or non-stock related inventory items periodically
• Assist in the planning, implementation and improvement of the warehouse and logistics operations
• Ability to write reports on discrepancies due to shortages, overages, damages, or system inaccuracies
• Ability to write or improve process flow reports on warehouse and logistics operations
• Work closely with Sales & Marketing / Operations / Customer Services on improvement to quality of products, processes and procedures
• In support of the Operations team, ensure products leaving the facility is in line with Dedienne Aerospace’s standards and meeting customers’ requirements
• Actively participate in regular meetings with Engineering Research & Development team, Sales Managers, Operations Managers and Customer Services Managers to ensure maximisation of cross department discussions
• Occasional business travel will be expected to fulfil the Quality Inspector role
• Incumbent to be situated in the Singapore facility

• Candidate must possess at least a Diploma in Engineering (Mechanical) or equivalent
• And/Or at least 2 year(s) of working experience in the related field is required for this position
• Applicants must be willing to work in Seletar Aerospace Park
• Full-Time position(s) available

Company: Chemical Manufacturing Company

Location: West

Position: QC Technician (Job ID: 18811)

Working hour: Mondays – Fridays, 8.30am – 5.30pm

Job Description:

1. Reports directly to the section engineer and/or designate
2. Shall carry out all laboratory tests and measurements accurately in accordance to procedure and upkeep/maintain the instruments/facilities in good running conditions
3. Shall prepares standards and reagents for analysis in accordance to procedure and ensure that all related documentation is maintained
4. Shall perform basic maintenance and troubleshooting of instruments and write the maintenance report after troubleshooting/maintenance
5. Shall handle ISO Documentation/Raw Data for QA Department
6. Shall accurately update internal Statistical Process Control (SPC) charts and monitor the charts
7. Shall assist in training for staff for QC Section-related activities when required
8. Shall maintains and checks inventory of all storage samples and ensure all relevant records are maintained
9. Shall perform receiving of QA department purchase and ensure that received items and all related document are correct at the point of receipt
10. Shall assist in audit preparation
11. Shall support the QA Section in its activities as and when required
12. Shall be involved in near miss identification and provide work improvement (QEHS) suggestions
13. Shall maintains the general upkeep and cleanliness of the laboratory and related areas by performing housekeeping
14. Shall strictly adhere to all EHS/QMS procedures in all aspects of the activities and observe line discipline and 5S
15. Shall performs any other tasks as instructed by the supervisor, engineer, QC section manager and HOD

Job Requirements:

1. Candidate with Diploma in Chemical or science discipline preferred
2. Experience with analytical instruments like ICP-MS, AAS, etc.
3. Ability to communicate clearly in both writing and verbally and good interpersonal skills
4. Proficient in Microsoft Office Tools

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Lee Xin Hui

EA Registration No: R22108046

Pasona Singapore Pte Ltd

1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246 EA License No:90C4069

• Ensure all packing workers are performed their jobs according to the written work instruction.
• To place packaging materials from the store by based on the packing plan.
• Verify and monitor the work done by Group Leaders and Inspectors.
• To handle and follow up on the problems forwarded by Group Leaders.
• Checked and reviewed all checklist and reports by Group Leader and below by timely basis.
• Assist final packing area.
• To provide on the job training to the Packers, Inspectors, Group Leaders other support operators.
• To ensure packing procedure and packing method are implemented and practiced.
• Ensure storage, packaging, online and final packing area are clean and tidy at all times.
• Ensure the product is stored, labeled and segregated at designated area.
• Ensure worker is handle products in correct manner and not causing any damage or contamination onto the products.
• Inform to Executive/Engineer or Manager for any equipment need to be repair, service or calibrate.
• To conduct appraisal for the worker during probationer period.
• Any other task that may be assigned.
• Help packing at warehouse.

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: QA Engineer
• Working Location: Defu Lane
• Working Hours: 5.5 days, Mon – Fri (8 am – 5 pm), Sat (8 am – 12 pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Be involved in supporting Internal and External Audit.
• Inspect Mechanical parts, detect welding and mechanical appearance defects.
• Use measuring equipment such as Trimos, Profile projector, Hexagonal Arm. Height gauges, Vernier calipers, etc.
• Read and interpret all drawing symbols and welding symbols.
• Liaise with external customers and internal teams.
• Provide technical advice and the best method for improving production work.
• Support Acceptance Test Plan / Process Management Plan and conduct training.
• Perform FA, Incoming, In-process and Outgoing inspection to meet the delivery schedule.
• Ensure all measuring equipment is calibrated.
• Ensure maintenance record and Production in-process record is updated on time.
• Ensure the implementation of corrective actions/preventive action as a result of weekly Source inspection by customers.
• Compiling Outgoing Inspection reports to support documents in the customer portal, Microsoft Office and Outlook.
• Assist with Document Control - To ensure all drawings are latest and filed in a proper manner.
• Assists/performs other non-routine duties as assigned by QA Manager

APPLY NOW!!!

• Must possess a minimum of a Diploma in mechanical engineering or equivalent.
• Min. 2 years relevant experience in QA.
• Experience in Machining, Metal stamping, fabrication and related secondary processes (such as welding, plating, and powder coating) industry will be preferred.
• Good knowledge of auditing skills for ISO9001 and Qualified Internal Auditor experience.
• Good problem-solving skills and analytical skills i.e. good skills in 5S, 8D methodology, 5-why analysis
• Must be able to read and interpret technical drawings.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65696 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Scope

UAT Tester, Group Finance

Execute test scripts

• Document and evidence the test results and screenshots into JIRA
• Track the issue till resolution and retesting
• Participate in daily UAT status update meetings
• Support the signoff of the respective test scenarios and test scripts by explaining what was performed to workstream supervisors
• Support UAT Test manager on dashboard data compilation

Requirements

• Min A Level and above
• No experience required, on the job training is provided

Interested candidate, please sent your resume in MS Word format to [email protected]

Andy Low Soon Meng (R1104601)

Recruit Express Pte Ltd
EA Licence No: 99C4599

We regret that only shortlisted candidates will be notified.

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

The Job:

• Ensure compliance with all local and environmental and safety laws and regulations inclusive of new projects onsite
• Manage occupational health related program by
• As a single contact point to liaise and negotiate with authorities and to ensure company fulfils the ESH laws and regulations
• Communicating on a regular basis with all regulatory agencies ensuring that company is in full compliance with applicable ESH regulations and anticipating changes that might affect our business environment.
• Lead the gap analysis of the ESH regulatory requirements, evaluate the impact, and propose the action plan to the Site Management Team
• Maintaining the standards of processes to meet ESH compliance norms
• Regularly monitoring internal processes related to ESH compliance
• Conduct evaluation of compliance of the ESH laws and regulations

The Requirements:

• Min Degree with min 5 to 8 years of relevant working experience
• Experience with NEA/ MOM compliance will be a plu
• Must have experience dealing with government bodies & authority

Interested applicants can send their detailed resumes to [email protected] or call Jane @ 6735 1955.

CEI: R1104482

Jane Lui Jie'en

Responsibilities:

• Proficient in Microsoft Office applications (Outlook, Excel, PowerPoint etc.)
• Carry out clerical duties, filing and preparing documents including quotations, contracts and reports etc.
• Coordinate daily servicing schedules with technicians and clients.
• Assist in follow-ups and inquiries to emails and phone calls.
• Handle complaints and ensure prompt and effective resolutions to meet expectations.
• Perform any other duties as assigned by manager.

Requirements:

• Basic knowledge in procurement, accounting, and payment processing.
• Excellent spoken and written communication skills.
• Ability to efficiently carry out assigned tasks, ensuring attention to detail and adherence to established procedures.
• Candidates without experience are welcome to apply.

*All information will be treated with strictest confidence. We regret that only short-listed applicants will be notified.

About The Team

You are part of the AML Risk Operations Team. The AML Risk Operations team is in charge of all AML related checks and ensures that the AML risk of the company is under control.
Within that team, the AML Quality Control & Testing team is in charge of quality control, testing, processes, and AML systems administration. You lead the Quality Control team.

About The Role

You will lead a team to make sure that our AML processes & governance are up to standard, continuously improving, and ready for expansion. You are also responsible for stress-testing existing rules & implementing new rules, as well as proper AML training of teams.

• Lead a team of analysts to analyse and improve quality of front-to-back risk operations processes
• Drive comprehensive assessments of existing AML, KYC and onboarding operations to identify and resolve bottlenecks, inefficiencies, and gaps
• Be responsible for the quality, good governance, and continuous improvement of our AML operations
• Use data-driven insights to make informed decisions
• Collaborate with cross-functional teams (from Commercial, Operations, Product etc) to proactively drive improvements
• Develop and implement strategies for process improvement, focusing on streamlining operations, reducing errors, improving SLAs, and enhancing customer experience.
• Establish and maintain robust quality assurance processes and metrics for AML and onboarding activities.
• Monitor and audit processes to ensure compliance with regulatory requirements and company standards.
• Provide training and guidance to AML and onboarding teams to ensure staff are well-equipped to follow revised processes and procedures.
• Foster a culture of quality and compliance within the organization.
• Maintain comprehensive documentation, prepare reports and presentations for senior management and regulatory bodies as needed.

Minimum Qualifications

• At least 7 years of relevant experience in Quality Control / Assurance in the AML space
• Strong understanding of AML policies for financial institutions
• Excellent communication and interpersonal skills, with the ability to work collaboratively with cross-functional teams.
• Strong project management skills with the ability to manage multiple initiatives simultaneously
• Ability to operate with flexibility in a fast-paced, constantly evolving and collaborative environment
• Proactiveness in driving change and willingness to roll-up sleeves and get things done
• Passion for the fintech industry and a cultural fit with start-up mindset

Preferred Qualifications

• Experience in startup environments
• Experience in consulting or banking environment
• Previous team management experience

QC Engineer – Serangoon road ( 5 day)

- working with process engineer & engineering team on QC requirement

- documenting inspection criteria and quality plan

- work with QA, process and product team on corrective action with quality issue

- work with process team on in-process audit and FQC audit

- min diploma in manufacturing / quality engineering

- at least 1 year of relevant working experience in electronics product manufacturing environment

- control of supplier quality assurance (SQA)

- quality control of in-coming , in-process and out-going products

- knowledge of iso9001, 14001, 13485 & 45001, fda requirement

- able to understand ipc requirement in PCB assembly, quality requirement of plastic molding, die casting, extrusion, netal stamping and machining parts

- Basic salary : S$ 3200 – S$ 4500 neg

INTERESTED CANDIDATES PLEASE EMAIL YOUR UPDATED MICROSOFT WORDS RESUME TO [email protected]

ENG YEE LEE (R1876385) @ UNION MANPOWER SERVICES PTE LTD (95C4597)

Must have experience in oil & gas components

Familiar in all kind of measuring instruments include CMM

Threading knowledge is Mandatory(ACME, BUTTRESS, IF CONNECTION)

Problem solving skill & commuicate with customer

Must attend API auditing, resolve NCR issues raised by customer and raise NCR internally.

Maintain API & ISO documents.

Must prepare COC and fulfill customer requirements