Job Description

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review Architectural drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Degree in Civil/Structural Engineering.
• Minimum 5 years Site/Working Experience.
• Good Organizational and planning skill.
• Able to work independently and as a team.
• Candidates with Marine Project experience preferred.

Requirement:

• Strong technical aptitude and the ability to understand and explain complex products and solutions
• Excellent communication and interpersonal skills, with the ability to build and maintain relationships with customers
• Problem-solving skills and the ability to think creatively to overcome challenges
• Strong negotiation and presentation skills
• Proficiency in Microsoft Office Suite and customer relationship management (CRM) tools
• Willingness to travel within the region as needed

Job Description:

• Proactively identify and pursue new sales opportunities within your assigned territory
• Develop and execute targeted sales strategies to meet and exceed sales targets
• Provide technical expertise and support to customers, ensuring their needs are met
• Collaborate with cross-functional teams to deliver seamless customer experiences
• Continuously monitor market trends and competitor activities to identify new avenues for growth
• Maintain accurate records of all customer interactions and sales activities
• Represent the company at trade shows, conferences, and other industry events

Inspection Engineer (Tankage)

Job Description:

Inspection on various tanks such as basic repair and maintenance.

Performed regular inspections to ensure Quality Assurance on the various installed materials in the facility.

Manage the inspection process regularly by determining the corrosion rate.

Perform internal/external inspections on storage tanks and to generate reports with repair recommendations.

Monitor the tank inspections on regular intervals.

Performed various quality assurance procedures on the tanks.

Maintain records of all inspection process carried in both hard copies as well as electronic copy.

Perform inspection asper various quality assurance procedures on the tank’s asper client criteria.

Perform internal and external inspections to determine if it meets the acceptance criteria of a specific code, standard or document.

Properly interpret regulations, codes, and industry standards.

Computer usage to compile and submit daily reports, inspection reports, and inter-office communications.

Pay attention to detail and be capable of recommending and approving repairs as well as performing visual inspection of completed work.

Maintains a positive relationship between client, facility, and customer; and promote a positive attitude towards co-workers.

Compile and submit completed inspection reports in a timely manner.

Inspection of various storage tanks in accordance with API inspection codes and Recommended practices asper API- 620, 650 and 653.

To provide technical expertise on all NDT matters as required on projects.

Qualifications:

Degree in any related engineering/science field from a recognized university

Candidates with a Diploma in Mechanical Engineering, preferably with more than 15 years of experience in the petrochemical industry working in fixed equipment or inspection related areas

Knowledge of materials selection, Non-Destructive Examination techniques, welding, and risk-based inspection procedures, would be an advantage

Familiarity with major API codes and specially API 650 for tankage will be an added advantage

Knowledge and ability to use computer programs such as MS Office, etc.

Willingness to work extended hours, not afraid of heights and working in confined spaces

A team player with strong communication and interpersonal skills

Capable of effectively driving milestone planning for Equipment Strategy development with key members from various functions

Candidates having work experience with ExxonMobil will be prioritized.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

• He/She is required to prospect for new accounts, maintain existing accounts, and build relationships with newly acquired customers.
• Service corporate accounts and manage full sales cycles
• You are required to apply appropriate strategies to increase sales.
• Keep updated on market competition and prices
• Attend site meetings and responsible to liaise with our customers on their solution needs and after sales need.
• Follow up and process sales orders, sales report generation, project management and sales presentations.
• Corresponding with customers on quotations and purchase order related issues.
• Manage daily sales inquiries and quotations via email and phone for both existing and new clients.
• Work closely & coordinate with the indoor team to maximize sales figures.
• Liaise with operation team and ensure timely delivery of customers’ orders
• To prepare report after Job Done / Pump Repair Done. (Training will be provided)
• Carry out risk assessment; Make recommendations on risk control measures and Communication Risk Assessments (RA) to concerned parties and other Method of Statement. (Training will be provided)
• Any other ad hoc duties assigned

Requirements:

• A degree or diploma holder preferably in Mechanical Engineering or a related field.
• Applicants with no working experience are welcomed (Training provided)
• Strong knowledge of pumps and their applications is highly desirable
• Experience in engineering sales/customer service is a plus.
• Proficiency in AutoCAD, Excel, and PowerPoint
• Willingness to travel for business purposes as required
• Excellent communication and interpersonal skills.
• Willing to learn, pleasant personality, humble responsible, positive working attitude and hardworking.
• Ability to work independently and as part of a team.
• Proficiency in Mandarin to liaise with Mandarin-speaking clients and suppliers.
• Salary base on the working experience, additionally + Commission
• Flexible and able to Support on Saturday if required.
• Class 3 driving license with own vehicle.

ATTRACTIVE REMUNERATION PACKAGES WILL BE OFFERED TO THE RIGHT CANDICATE

Kindly send us your updated resume indicating your current and expected salary to: [email protected]

We regret that only shortlisted candidate will be notified.

Visit us at: https://www.acms.com.sg

Job summary

Attractive salary package

Learning & Development opportunity

Positive Working Environment Commission

• Assist in the planning and scheduling of construction activities.
• Coordinate with architects, subcontractors, and suppliers to ensure project specifications are met.
• Conduct site inspections to ensure compliance with safety and quality standards.
• Supervise and manage on-site construction activities.
• Monitor project progress and provide regular updates to the project manager.
• Ensure all materials and workmanship meet the required standards and specifications.
• Implement and enforce health and safety protocols on the construction site.
• Conduct safety audits and inspections to ensure a safe working environment.
• Prepare and submit reports on project status, costs, and any issues or delays.
• Liaise with clients, architects, engineers, and other stakeholders to ensure smooth project execution.
• Attend project meetings and provide updates on construction progress and challenges.

Requirements

• Required language(s): Chinese, English (in order to liaise with the English & Chinese speaking associates)
• Graduate with no experience welcome.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Good team player and problem solver.

Job Responsibilities

• Provide effective and timely services and support all existing scheduled projects
• Provide sales support on technical specification & information, data, drawings
• Project quotation specification confirmation and technical clarification
• Design accessories and create 3DCAD drawings for quotations and assemblies
• Provide consultation and offer workable solutions to help solve customers’ concerns
• Do on-site technical assessment and provide engineering solutions
• Presentation and training to internal and customers
• Ensures quality by completing all final inspections and repair reports

Requirements

• Degree/Diploma in Mechanical / Instrumentation / Mechatronics Engineering or equivalent
• Ability to operate 3DCAD (Solid Works)
• Good knowledge onl valves and instrumentation is preferred.
• Related experience in process & control or instrumentation service industry is preferred.
• Decisive, drive and ability to deliver effective, innovative solutions
• Good knowledge of Microsoft excel, word and powerpoint
• Be able to work long term with us
• English fluency (meeting and writing reports inside and outside the company)
• A person who has positive and can think and act for himself/herself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication and interpersonal skills at all levels.

Reporting Function

• Directly report to Engineering Manager/General Manager

RESPONSIBILITIES & DUTIES

• Assist the Production Manager in the scheduling of all incoming jobs and ensure close monitoring and timely delivery.
• Assist the Production Manager in taking charge of all coating (HVOF and Armoloy) jobs and ensure delegation and coordination on the necessary works.
• Understand the full requirements of all manufacturing, servicing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Ensure all budgets and plans are met.
• Assist the Production Manager to monitor and manage workshop loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans.
• Attend weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager to work closely with all Production Supervisors to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Identify the skill level of each reporting employees and distribute suitable work tasks to achieve higher throughput.
• Manage and resolve grievances and conflicts arising. Motivate employees to boost their morale.
• Work with Production Manager, Engineering Manager, General Manager and HR department to develop, implement and conduct training to enhance the competency or upgrading of skills for production employees.
• Conduct annual performance appraisal for all reporting employees.
• Work closely with the QHSE Manager/ MR to resolve quality issues.
• Perform review on PCR and work closely with the sales, engineering and quality department or customer to clarify all technical specifications and job requirements.
• Assist the Production Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager in initiating purchase requisition for any requirements.
• Assist the Production Manager in preparing monthly reports whenever required.
• Work closely with all departments to resolve any arising issues.
• Assist the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Accountability

• Control, lead, develop and motivate all reports.
• Monitor and ensure on time delivery of finished product.
• Minimize rework and rejection rate.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.
• Report all unsafe acts, infrastructure and environment to his Manager.

QUALIFICATION & EXPERIENCE

· Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.

· Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

RESPONSIBILITIES & DUTIES

§ Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.

§ Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.

§ Generate PCR and manufacturing process plan.

§ Generate engineering drawings and perform drafting.

§ Support Asst. Engineering Manager on the job costing.

§ Continuously explore for new manufacturing method or new external providers to support the production.

§ Work closely with the Production Supervisor to resolve any production issue.

§ Support the procurement department to deal with external providers on all technical issues.

§ Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.

§ Follow safe work practices and procedures.

§ Ensure company and QHSE policies and procedures are adhered to at all times.

§ Participate/ attend all functions, activities and meeting organized by the company.

§ Perform other assignment and duties as and when required.

§ Welcome Fresh Gradutes

• Site & office project management and daily operations including inspections, handover, site measurements, project management
• Handling technical and engineering issues
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Liaison and meeting with client's representatives, relevant authorities and consultants
• Site co-ordination, monitoring and report work progress
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of projects
• Conduct site check on the repair works, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions

Job Requirement:

• At least Diploma, Advanced Diploma, Bachelor’s Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent
• 0 - 2 Year(s) of experience in sales of products & services, preferably in Engineering Industry
• Good communication skills and networking skills
• Self-drive & motivated individual
• Salary will be paid based on experiences and qualifications

Job Summary:

The Project Engineer is responsible for planning, coordinating, and executing engineering projects, ensuring they are completed on time, within budget, and to the required quality standards. This role involves working closely with project managers, engineering teams, and other departments to ensure successful project delivery. The Project Engineer will be involved in project planning, technical review, and site coordination, providing essential support throughout the project lifecycle.

Key Responsibilities:

• Project Planning and Coordination:Assist in defining project scope, objectives, and deliverables, ensuring alignment with client requirements and business goals.
  Develop and monitor project schedules, budgets, and work plans, using project management tools to track progress and ensure timely completion.
  Coordinate with engineering, procurement, and construction teams to ensure alignment on project milestones and deliverables.
  
• Technical Support and Design Review:Review and interpret technical drawings, specifications, and documentation to ensure engineering quality and compliance.
  Provide technical input to the design process, working closely with design teams to address any engineering challenges.
  Support project manager in evaluating design changes, assessing their impact on project schedules and budgets.
  
• Site Coordination and Quality Control:Conduct site visits as needed to monitor project progress, identify issues, and ensure compliance with design specifications and safety standards.
  Coordinate with contractors, vendors, and suppliers to ensure materials and equipment meet quality requirements and project specifications.
  Assist in conducting quality control inspections, ensuring that installations align with engineering and regulatory standards.
  
• Documentation and Reporting:Prepare and maintain project documentation, including status reports, meeting minutes, and technical documents.
  Provide regular updates to project managers on project progress, potential risks, and any adjustments needed to stay on track.
  Support procurement activities by reviewing material specifications and participating in vendor evaluations as necessary.
  

Qualifications and Experience:

• Bachelor’s degree in Engineering (Mechanical, Civil, Electrical, or a related field).
• 3-5 years of experience in a project engineering role, preferably in [specific industry, e.g., oil and gas, construction, manufacturing].
• Proficiency in project management software (e.g., MS Project, Primavera) and CAD software (e.g., AutoCAD).
• Familiarity with industry standards and codes relevant to engineering projects.

handle drawings

allot jobs for project incharge

follow up with client

Job Responsibilities

• Involve in the analysis, design, documentation, coding, and testing of our applications
• Performing unit and integration testing
• Conducting functional and non-functional testing
• Troubleshoots production problems related to software applications
• Resolves problems and responds to suggestions for improvements and enhancements
• Evaluating current applications to update or add new features
• Ability to work independently on assigned tasks.
• Assist with project plan time estimates and ensure development milestones are met
• Performs any additional duties assigned by the immediate supervisor or senior management

Job Requirements

• Candidate must possess at least a Diploma and above
• At least 1 Year(s) of working experience in the related field is required for this position
• Required Skill(s): Well-versed in ASP.Net (MVC) and knowledge of Microsoft SQL.
• Ability to thrive in a fast-paced environment

Are you an experienced Commissioning Engineer and do you want to leave your mark on the global energy industry? If so, we want to hear from you!

Semco Maritime in Singapore is looking for commissioning engineers as an expansion of our engineering team engaged in Telecommunication Systems – PAGA, PABX, CCTV, GMDSS Radio System, VSAT System, UHF Repeater System etc. solutions for the Offshore and Onshore Oil & Gas Industry.

Job Tasks

You will be involved primarily in fabrication, installation, and commissioning of telecommunication systems.

You may also be required to assist lead engineer / project manager in the daily execution of ongoing projects.

Qualifications/Requirements:

• A Degree in Telecommunication / Electrical / Electronic Engineering.
• Some relevant working experiences in the Oil and Gas industry would be advantageous.
• Strong knowledge in various Telecommunication Systems, especially one or two of following:

1. GMDSS Radio
2. VHF Aeronautical Radio and Helicopter Navigation Beacon e.g. NDB
3. UHF Active Repeater System with TX & RX Combiners
4. Crane & Life Boat Radios
5. Leaky Feeder and Passive Antenna
6. VSAT Systems with Stabilized Antennas
7. ENT/IPTV & TVRO Systems with Stabilized Antennas
8. CCTV Systems
9. PAGA systems
10. PABX systems
11. LAN/WLAN and IP-PABX Systems
12. EPOB System
13. ENV/HMS & Weather Monitoring Systems
14. PNS, P.R.S. & Navigation Systems
15. TNMS System
16. Telecom Shutdown Systems

• Hands-on experience on configuration, programming, troubleshooting, installation and commissioning of the above systems
• High responsibility and ownership on delivering high quality work within given project schedule
• Ability to multi task and work under pressure
• Team player with cooperation spirit and excellent coordinating skills, as well as capable of working independently
• Pro-active and have right working attitude
• Self-motivating and willing to learn
• Possess good interpersonal, communication and technical writing skills.
• Knowledge of application software e.g. Word, Excel, AUTOCAD etc.

You will be part of a dynamic worldwide team of engineers which will require your ability to work, and cooperate with local engineers as well as Semco’s engineers around the world.

Please send us your resume with the wording “Commissioning Engineer, Telecommunication” in the subject field, stating your credentials and past job experience with your application. Please state your expected salary, required time for notification and reasons for leaving your present position, if available.

We regret that only shortlisted candidates will be notified.

Welcome to Semco Maritime

At Semco Maritime, we create change. For people. For projects. And for the global energy sector. With us, you will join a community of over 2,200 of the most dedicated thinkers and doers in the energy industry who are driving real change and making their own personal mark on the global energy landscape.

While everyone knows why the energy transition is vital, we are concerned with the journey. How to get there. By providing the answers needed to make change real. Because we believe that global energy ambitions can only be realized through hard work and clever pragmatic solutions. This is what we do. This is what we invite you to

participate in.

So yes, working for us will change the energy sector – and may well change you too.

Care to join the movement?

Change. With us.

As a Senior Backend Engineer specializing, you will be responsible for designing, developing, and maintaining backend systems that support the integration and optimization of AI models & LLM in trading applications. You will work closely with the AI engineering team to integrate various machine learning models and algorithms into the backend systems to address business needs, ensuring high availability and low latency.

Key Responsibilities:

• Design, develop, and maintain backend systems and services that support AI models, ensuring high availability and low latency
• Integrate machine learning models and algorithms into backend systems for recommendation systems, predictive analytics, and other business applications
• Collaborate with frontend engineer, AI engineer and other stakeholders to identify business problems and design backend solutions
• Develop efficient APIs, ensuring high standards of performance, reliability, and security
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Document system design and API specifications to foster collaboration and transparency

Qualification & Skills:

• 4+ years of professional experience as Backend Engineer
• Proficiency in Python/ Typescript
• Strong understanding of database systems, including both SQL and NoSQL, and web development frameworks
• Solid experience in complex system design or architecture building.
• Familiarity with API design principles and best practices.
• Familiarity with caching mechanisms and cache invalidation strategies.
• Experience with cloud infrastructure, preferably AWS or GCP.
• Strong problem-solving, communication, and interpersonal skills.
• Passionate about AI/ML, with a keen interest in LLM technology.

We offer a competitive salary that is commensurate with the experience of the successful candidate

We are now seeking Field Service Engineer to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Perform inspection, installation, commissioning, repair, upgrading, troubleshooting and related service work on offshore drilling platforms, land rigs, Shipyard or in workshops.
• Liaise with rig’s management during offshore assignment.
• Communicate with respective Managers for briefing and debriefing of service-related activities.
• Fill in necessary job reports, ISO work instructions and checklists required for all work in a timely manner.
• Interface with relevant departments to obtain a thorough understanding of NOV products and how they are safely operated, tested, calibrated and problems are resolved in a timely manner.
• Communicate field failures and feedback reports to the appropriate departments.
• Install, commission, troubleshoot, and repair NOV drilling equipment
• Provide training to other NOV personnel on the following systems and equipment as needed.
• > Analog and digital PLC based systems
• > Proprietary integrated control systems (Cyberbase, Amphion)
• > Variable Frequency Drives
• > Hydraulic/Pneumatic Systems
• > Electrical Systems (including various types of AC/DC motors)

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.
• Travelling on short notice is required. approximately 50% travelling.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand electrical schematics and PLC programs. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

We are seeking a Lead Application Support Engineer to to manage and oversee the smooth operation of critical applications, ensuring seamless user experience and system functionality.

• Competitive remuneration package (up to $6,300 + AWS + VB).
• Hybrid working arrangement.
• Leadership Role: Take charge of support operations and lead a dedicated team.

Responsibilities:

• Oversee and manage a 24/7/365 level 1 application support team, ensuring continuous support for both applications and systems.
• Participate in the recruitment and management of staff, including planning and organizing shift rotations.
• Train team members on the application's functionality, interface, and features, ensuring they are equipped to handle support tasks.
• Ensure team members provide adequate support to end-users, while also delegating tasks and responsibilities effectively.
• Take full ownership of all issues raised, ensuring they are resolved, regardless of which development team or vendor is responsible.
• Act as the primary point of contact for both technology teams and end-user clients on a day-to-day basis.
• Maintain and update a knowledge base of known issues, defects, and troubleshooting techniques, and ensure problem tickets are properly managed.
• Handle escalations effectively and manage client expectations to ensure smooth operations.
• Debug and improve application code when necessary to resolve issues or enhance functionality.

Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Minimum of 3 years experience in relevant roles.
• Prior experience in supporting Web-based applications.
• Experience with some programming languages and willingness/ability to learn.
• Familiarity with IT industry practices and methodologies (ITIL foundation certification will be an added advantage).
• Prior experience in team leading and management is a must.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Job Description

Your main responsibilities will be:

• To carry out different machining operations on CNC & Conventional machines according to drawings, procedures and specifications
• To be involved in continuous improvement and optimise work processes

Job Requirements

What do you need from me?

• Previous experience on CNC and Conventional machines with an understanding of machining principles
• Ability to read production drawings
• Understand and Primarily Operate CNC Control systems
• Mill turning techniques
• Set and Run various CNC Machines & conventional machines.

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

- project management: Liaise with contractor to set up charger including Router , LAN or SIM. Link API to platform.

- ⁠Repair & maintenance Troubleshooting , replacement of parts, liaise with factory; logging & data retrieval.

- ⁠planning & leads a team for charger maintenance. Offer service to customer.

- ⁠Apply LTA technical requirements .

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are looking for a dedicated and skilled Assistant Engineer to support our maintenance team in ensuring the smooth operation of all machinery and equipment. This role is ideal for someone who has a strong technical foundation and is eager to learn and grow within a maintenance engineering environment. The Assistant Engineer will assist with routine maintenance, troubleshooting, and repairs while ensuring safety and efficiency in all tasks.

Be Part of Our Success

• Assist senior engineers in routine maintenance tasks and repairs on equipment
• Aid in diagnosing and addressing minor issues promptly to reduce downtime
• Help carry out scheduled preventive maintenance tasks to keep equipment in optimal condition
• Record maintenance activities accurately, including repairs, replacements, and inspections, under the guidance of senior engineers
• Ensure all work adheres to safety standards and regulations; actively maintain a safe working environment
• Assist in managing spare parts inventory, notifying senior staff of low stock and needed reorders
• Work closely with the maintenance and production teams to complete tasks and support the overall maintenance strategy

Qualities We Value

• Diploma in Engineering
• Ability to diagnose and repair complex systems
• Able to adapt and work under tight schedule
• Able to communicate effectively with customers
• Strong analytical skills to identify issues and implement effective solutions
• Possess class 3 driving license
• Working location is in Ang Mo Kio
• Singaporeans only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated
• Meaningful work and projects that make a difference in people’s lives
• A fun, passionate and collaborative workplace
• Competitive remuneration and comprehensive benefits

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field

Tasks and Responsibilities

• Overseeing the regular maintenance and repair of shipyard facilities, including buildings, docks, cranes, and other equipment.
• Planning and executing facility improvement projects, such as building renovations, dock expansions, or utilities upgrading.
• Ensuring all facilities adhere to safety regulations and standards.
• Developing and managing budgets for facility maintenance and improvement projects.
• Identify opportunities to improve energy efficiency in shipyard operations and implement cost-saving initiatives.
• Ensuring compliance with environmental regulations and implementing sustainable practices.
• Identify potential risks to shipyard facilities and operation processes.

Job Requirements

• 2 years of experience in heavy industry, preferably Shipbuilding industry.
• Read technical diagrams and schematics for work planning and issue resolution.
• Diagnose or troubleshoot faults in the plants and machinery.
• Carry out electrical wiring / mechanical installation and technical maintenance works.
• On-site installation, system setup, calibration, testing, onsite repairs and preventive & corrective maintenance.
• Ability to identify and resolve issues related to facility operations.
• Experience in developing and managing budgets.

Job Responsibilities:

1. Utilize wireless vibration sensors & cloud-based diagnostic analysis software to provide clients with remote diagnostic analysis of machinery health services.
2. Collaborate with client maintenance teams to develop and implement condition-based monitoring programs, and reliability-centered maintenance (RCM) strategies.
3. Continuously monitor asset performance through PHM remote diagnostic services, identify opportunities for improvement, and develop and implement reliability improvement initiatives.
4. Perform data analysis, failure mode and effects analysis (FMEA), and root cause analysis to identify potential failures, their impact, and underlying causes. Offer technical guidance and support to the stakeholders in optimizing asset reliability and performance.
5. Responsible for the vibration alarm setting and optimization, diagnostic models on the PHM system.
6. Collaborate with PHM solution engineers to perform data verification and analysis work.

Requirements: -

1. Proven experience (over 3 years) in reliability engineering & vibration diagnostic field, with the ability to independently diagnose equipment faults, and offline testing experience.
2. ISO Category III certification. Understanding of equipment reliability, predictive maintenance strategies, root cause analysis, and equipment data analysis.
3. Familiar with the principles and maintenance of rotating equipment (such as motors, gearboxes, fans, pumps, etc.)
4. Preferably with bachelor’s degree in engineering, or a related field (Mechanical, Electrical, Industrial, etc.), specializing in equipment fault diagnosis would add advantage.