• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

The Storage Engineer is responsible for the administration, monitoring, and troubleshooting of Storage Area Network (SAN) and backup systems in a 24x7 enterprise environment. This role covers both level 1 and level 2 support for storage-related issues and requires certification and experience with a range of storage and backup technologies. Key technologies include IBM, EMC, NETAPP, Hitachi, Cisco SAN switches, and enterprise backup solutions. The Storage Engineer will ensure seamless operation, maintain system integrity, and support disaster recovery activities.

Key Responsibilities:

1. Storage Administration & Support: Provide installation, configuration, and ongoing administration support for SAN and enterprise backup systems to maintain operational efficiency.
2. Monitoring & Health Checks: Perform regular health checks and monitor storage devices, ensuring early identification and resolution of potential issues.
3. System Integration: Integrate storage hardware and software into the operating environment, ensuring compatibility and optimal functionality.
4. Firmware Updates & Documentation: Conduct firmware updates on storage devices and maintain comprehensive documentation for all configurations and processes.
5. Testing & Validation: Develop and coordinate test plans with customers to verify the full functionality of storage and backup solutions in live environments.
6. Backup Administration: Manage Symantec and other backup environments, including job configuration, scheduling, performance tuning, and troubleshooting of backup-related issues.
7. Disaster Recovery: Execute disaster recovery (DR) protocols for critical systems, ensuring successful restoration of production or DR servers when needed.
8. Storage Subsystem Management: Oversee multiple storage subsystems, including tasks like disk partitioning, LUN assignments, and capacity planning.
9. Zoning & Access Control: Create and manage zones, handle switch-related issues, and define security configurations within the torage subsystems.
10. Capacity Planning & Performance Tuning: Conduct capacity planning, monitor utilization, and tune performance for both storage and backup systems.
11. Data Center Operations: Support data center operations, including power cycling of storage devices, SAN switch upgrades, and participation in DR exercises.

Qualifications & Requirements:

• Education: Diploma or Degree in IT, Information Systems, Computer Science, Business IT, or equivalent.
• Experience:
  • Minimum of 3 years in enterprise backup solutions and SAN environments.
  • Hands-on experience with power cycling, SAN switch upgrades, and storage replication.
  • Exposure to data center shutdown activities and disaster recovery exercises.
• Technical Skills:
  • Proficiency with IBM V3700/V7000, EMC Unity/VNX, NETAPP, HP Nimble, Hitachi, EMC Isilon, and Cisco/Brocade SAN switches.
  • Experience with enterprise backup tools like NETBACKUP, Veeam, and IBM tape libraries.
• Soft Skills:
  • Strong analytical and problem-solving skills, with the ability to work independently.
  • Effective communication skills and customer service orientation.
  • Demonstrated leadership and team collaboration capabilities.
• Preferred Experience: Previous work with government sector clients is advantageous.

INFORMATION

Job Title: Process Engineer - Drive Innovation in Precision Manufacturing!

Company: A leading SME in precision component manufacturing with international presence.

Location: Singapore

ABOUT US

We are a dynamic and growing company specializing in the design and manufacture of high-precision metal components for automotive, appliances, energy, medical, photonics market. We are committed to innovation, quality, and customer satisfaction. We offer a collaborative and rewarding work environment where your contributions will have a direct impact.

ABOUT THE ROLE

We seek an experienced Manufacturing Process Engineer to join Operations team. The successful candidate will optimise manufacturing processes, improve productivity, and ensure high-quality products. This role requires strong technical knowledge, problem-solving skills, and collaboration with cross-functional teams.

KEY RESPONSIBILITIES

● Process Optimization:

○ Analyze and optimize zinc die casting processes to improve efficiency, reduce costs, and enhance product quality.

○ Implement process improvements, monitor results, and adjust as necessary.

● Process Design and Development:

○ Design, develop, and implement new die casting processes and tooling.

○ Collaborate with tooling designers to ensure optimal die design.

● Quality Control:

○ Develop and maintain quality control procedures.

○ Conduct regular quality audits to ensure compliance with industry standards.

● Equipment Maintenance:

○ Ensure proper maintenance of die casting machines and peripheral equipment.

○ Troubleshoot equipment issues and implement corrective actions.

● Safety and Compliance:

○ Ensure compliance with safety regulations and company policies.

○ Conduct risk assessments and implement safety improvements.

● Training and Development:

○ Train production staff on new processes and equipment.

○ Develop and maintain training documentation.

● Continuous Improvement:

○ Identify areas for improvement and propose solutions.

○ Lead or participate in continuous improvement initiatives.

● Collaboration:

○ Work closely with production, maintenance, and quality teams.

○ Communicate effectively with suppliers and customers.

● Project Management:

○ Manage projects related to process improvements, new product introductions, and equipment upgrades.

● Data Analysis:

○ Collect and analyze data to measure process performance.

○ Use data to drive decision-making and process optimization.

CANDIDATE’S REQUIREMENTS

● Bachelor's Degree or Diploma in Mechanical Engineering, Manufacturing Engineering, or related field.

● Minimum 3-5 years of experience in a manufacturing environment, preferably in molding/ casting or a related industry.

● Strong knowledge of metal component manufacturing and tool design.

● Experience with process optimization, lean manufacturing, and Six Sigma methodologies.

● Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

● Strong problem-solving, communication, and project management skills.

● Ability to work in a factory environment and prioritize multiple tasks.

● Advantage if candidate has experience in automation, robotics, and familiar with quality management systems (e.g., ISO 9001).

The Wintel Engineer is responsible for specialized support in planning, installation, and administration of workplace management systems, focusing on endpoint and cloud infrastructure management. This role requires expertise in Windows-based environments, cloud services, and automation tools to optimize the deployment and maintenance of workplace solutions. Responsibilities also include enhancing operational procedures, ensuring system efficiency, and adhering to best practices.

Key Responsibilities:

1. Endpoint Hardware & Imaging Management: Install, configure, test, and maintain endpoint hardware and images, covering OS, applications, drivers, upgrades, updates, and hotfixes.
2. Patch Management & Software Distribution: Plan, implement, and oversee Patch Management and Software Distribution services.
3. Cloud Infrastructure Administration: Design, deploy, and maintain AWS and Azure services, ensuring scalability, security, and high availability. Manage services including EC2, VPC, S3, RDS, Lambda, IAM, Azure App Services, and SQL Database.
4. Cloud-Native Application Deployment: Collaborate with development teams to architect and deploy cloud-native applications, leveraging AWS and Azure capabilities.
5. Infrastructure Automation: Use infrastructure-as-code tools like CloudFormation or Terraform to automate and maintain AWS and Azure environments.
6. Troubleshooting & Issue Resolution: Diagnose and resolve issues related to AWS/Azure infrastructure, applications, and connectivity.
7. Disaster Recovery: Implement and manage backup and disaster recovery strategies for cloud resources.
8. Workplace Management Tools: Administer and troubleshoot backend services, with a focus on PC imaging, workplace management tools, and resolving desktop/server escalations.
9. Quality Assurance & Process Improvement: Conduct Quality Assurance testing on endpoint devices and contribute to the automation and streamlining of daily operational processes.
10. Documentation & Reporting: Maintain accurate documentation and generate reports to ensure clear communication and record-keeping.
11. Additional Duties: Support other duties as required to ensure the efficient operation of workplace management systems.

Qualifications & Requirements:

• Education: Bachelor’s Degree or Diploma in Electrical/Electronic/Computer Engineering or Information Systems.
• Experience:
  • Minimum 5 years of experience with Windows Servers, Active Directory, PowerShell, Group Policy Objects, and workplace management tools (e.g., HC BigFix, MS SCCM, Citrix VDI, Nexthink).
  • Proficiency in PC imaging deployment, patch management, and software distribution for both desktop and server environments.
• Technical Skills:
  • Strong understanding of AWS and Azure services, including infrastructure and automation (CloudFormation, Terraform).
  • Solid networking and security knowledge for AWS and Azure environments.
  • Familiarity with CI/CD pipelines, version control systems (e.g., Git), and scripting languages (Python, Shell).
  • Working experience with MSI technology, application packaging, and deployment processes.
  • Knowledge of custom actions, scripting, and Windows Installer technology for troubleshooting.
• Certifications: AWS or Azure certifications (e.g., AWS Certified Solutions Architect, Azure Administrator) are a plus.
• Soft Skills: Effective communication, documentation experience, strong troubleshooting abilities, self-driven, and able to work independently.

The Systems Engineer, Unix/Linux is responsible for managing and supporting Unix/Linux infrastructure in a 24x7 enterprise environment. This includes operational support, troubleshooting, deployment of updates, and maintaining service continuity to meet business requirements and service levels.

Key Responsibilities:

1. Unix/Linux Infrastructure Support: Manage and support Unix-based IT infrastructure, ensuring stable operations across Unix, Linux, Solaris, Redhat, AIX, and SUSE environments.
2. Troubleshooting & Root Cause Analysis: Provide expertise in diagnosing and resolving server and application issues, delivering root cause analysis as required.
3. Package Deployment: Deploy Unix/Linux packages and bug fixes across Test, Pre-Production, and Production environments.
4. Operational Administration: Oversee day-to-day operations for Unix/Linux environments, adhering to business needs and service level agreements (SLAs).
5. Change Management: Follow established change management protocols for infrastructure changes, including status reporting to relevant stakeholders.
6. First and Second-Level Support: Provide 1st and 2nd level operational support, including initial troubleshooting of third-party applications and collaboration with vendors for resolution.
7. Audit & Compliance: Participate in audit activities, respond to audit findings, and ensure compliance with relevant requirements.
8. Incident Response: Quickly respond to incidents, security alerts, and investigations, implementing temporary or permanent resolutions and providing timely updates to stakeholders.
9. Service Continuity: Implement and maintain continuity measures, such as backup/restore procedures and disaster recovery plans, to support ongoing business operations.
10. Documentation: Ensure all relevant documentation is updated and maintained.
11. 24x7 Support & After-Hours Work: Conduct necessary after-hours maintenance, such as patching, in alignment with the 24x7 operational requirements.
12. Additional Support Activities: Perform other Unix/Linux administrative tasks as needed and travel to other Singapore offices occasionally as required.

Qualifications & Requirements:

• Education: Minimum of a Diploma in Information Technology, Computer Science, or a related field.
• Experience:
  • At least 3 years of relevant experience managing Unix/Linux environments (Solaris, Redhat, AIX, SUSE) in an enterprise-level setting.
  • Strong experience in RedHat Clustering and Oracle Solaris Clustering.
• Technical Skills:
  • Proficiency in scripting languages and tools, such as Perl, Ruby, and AWK.
  • Knowledge of monitoring tools such as SolarWinds.
  • Familiarity with Microsoft technologies (Windows Server, Active Directory, Group Policy) is an asset.
• Work Environment: Typically 9 am to 6 pm, with flexibility required for after-hours work due to the 24x7 nature of the role (e.g., patching activities).

Requirements:

Experience: 4+ years in AWS cloud engineering roles, specifically in support/operations.

Technical Skills: Strong expertise in AWS services setup/management (at a min. S3, IAM, EC2, SageMaker, AWS Networking), monitoring tools, and scripting languages (Python, Bash).

Certifications: AWS Certified Solutions Architect/Developer/DevOps Engineer.

Soft Skills: Excellent problem-solving skills, strong communication, and a proactive approach to managing cloud infrastructure and fairly complex customer driven operations processes

This role requires someone detail-oriented, proactive, and comfortable in fast-paced cloud environments.

Job Description & Responsibilities

• Maintenance of Quality Management System ensuring compliance to internal, and international standards and regulatory requirements for medical devices.
• Develop QMS documents in line with business activity of DxD Hub.
• Ensure the overall document control system supports the QMS.
• Work with technical team to create quality document related to product design, development, and manufacturing, including product test/validation protocols, change management in compliance to applicable regulatory requirements.
• Lead auditor for internal and external audits.
• Conduct management review, ensure QMS stays current and relevant.
• Lead in root cause analysis and CAPA.
• Analyze trends inquality performance.
• Drive improvement in the quality management system.

Job Qualifications

• At least a Master's degree in Science/Engineering or relevant related field.
• Possess at least 4 years of working experience in quality assurance in medical devices; thorough working knowledge of ISO 13485:2016.
• Good working knowledge in managing QMS in a medical device environment in compliance to ISO 13485:2016.
• Competent in quality assurance methodologies.
• Working knowledge in QA processes for design, development, and manufacturing of IVD, SaMD and Integrated Medical Technologies.
• Demonstrated skills in risk management (ISO 14971).
• Knowledge in regulatory requirements for medical devices in ASEAN, USA and EU.
• Strong background in biomedical, computer or engineering sciences.
• Awareness of applicable workplace environment, health, and safety regulations.
• Possess creative skills and problem-solving skills.
• Adeptness in cultivating professional networks and build strategic partnerships.
• Good communication skills.
• Demonstrates strong leadership capabilities and an agile mindset.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description & Responsibilities

• Maintenance of Quality Management System ensuring compliance to internal, and international standards and regulatory requirements for medical devices.
• Develop QMS documents in line with business activity of DxD Hub.
• Ensure the overall document control system supports the QMS.
• Work with technical team to create quality document related to product design, development, and manufacturing, including product test/validation protocols, change management in compliance to applicable regulatory requirements.
• Lead auditor for internal and external audits.
• Conduct management review, ensure QMS stays current and relevant.
• Lead in root cause analysis and CAPA.
• Analyze trends inquality performance.
• Drive improvement in the quality management system.

Job Qualifications

• At least a Bachelor’s degree in Science/Engineering or relevant related field.
• Possess at least 4 years of working experience in quality assurance in medical devices; thorough working knowledge of ISO 13485:2016.
• Good working knowledge in managing QMS in a medical device environment in compliance to ISO 13485:2016.
• Competent in quality assurance methodologies.
• Working knowledge in QA processes for design, development, and manufacturing of IVD, SaMD and Integrated Medical Technologies.
• Demonstrated skills in risk management (ISO 14971).
• Knowledge in regulatory requirements for medical devices in ASEAN, USA and EU.
• Strong background in biomedical, computer or engineering sciences.
• Awareness of applicable workplace environment, health, and safety regulations.
• Possess creative skills and problem-solving skills.
• Adeptness in cultivating professional networks and build strategic partnerships.
• Good communication skills.
• Demonstrates strong leadership capabilities and an agile mindset.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Scope details:

Conduct initial meetings to gather requirements and understand the existing infrastructure.

Document the project scope, objectives, and deliverables.

Assessment and Planning:

Assess the current infrastructure and network setup.

Plan the VDI deployment, including resource allocation and network configuration.

Design:

Design the Omnissa architecture, including core components, and DR site setup.

Create detailed design documents covering all aspects of the deployment.

Implementation (DC and DR):

Deploy VMWare Hypervisor and vSphere components (vCenter, vSwitch)

Deploy Windows server machines, Microsoft SQL server, Windows KMS server, Vmware dynamic environment manager and App volume server

Configure Vmware Horizon/Omnissa for users.

Set up the DR site with replication and failover configurations.

Create and deploy master images for VDI desktops.

Implement user profile management and policies.

Provisioning of VDIs for users

Testing and Validation:

Conduct thorough testing of the VDI environment, user testing and failover tests.

Validate the setup with user acceptance testing (UAT).

Training and Documentation:

Provide knowledge transfers for administrators and end-users.

Deliver comprehensive documentation, including as-built documents and operational guides.

Go-Live and Support:

Assist with the go-live process and provide post-deployment support.

Required Loca Cat 2 Clearance prior to onboard candidate.

The Systems Engineer is responsible for providing technical support for Microsoft 365 (M365) applications, resolving technical incidents, and addressing service requests for users. This role also requires handling escalated customer issues to ensure satisfactory business outcomes. Key duties include major incident management, problem and change management, service and process improvements, customer relationship engagement, M365 user onboarding/offboarding, Windows OS support, and participation in end-user computing (EUC) projects, particularly related to M365 products.

Key Responsibilities:

1. M365 Application Support: Offer technical expertise on M365 applications, including Exchange Online, MS Teams, OneDrive, Defender, Intune/Autopilot, SharePoint Online, and core M365 services. Promote best practices for efficient M365 use.
2. Troubleshooting and Incident Resolution: Analyze and resolve issues, collaborating with external vendors and support personnel as needed.
3. System Administration: Perform administrative tasks in Azure Active Directory, including managing users/groups, security permissions, group policies, systems configuration, event log analysis, and resource monitoring.
4. Technical Support Collaboration: Work with the service desk and support teams to troubleshoot, identify root causes, and provide technical assistance.
5. Documentation: Create and maintain documentation, including knowledge base articles, for M365 and EUC services.
6. Employee Training: Deliver training on M365 applications, translating technical capabilities into accessible guidance.
7. Intune and Autopilot Expertise: Provide hands-on support and configuration of Microsoft Intune, focusing on packaging, deployment, reporting, troubleshooting, and policy creation.
8. Windows OS and Desktop Support: Support Windows OS, desktop, and laptop hardware/software, conducting installations per customer requirements.
9. Root Cause Analysis (RCA): Conduct RCA for EUC service issues, including those related to M365 products, as part of the problem management process.
10. Vendor Coordination: Coordinate with support vendors for maintenance and issue resolution as needed.
11. Customer Satisfaction and Support: Collaborate with the team to meet high customer satisfaction levels, acting as the main contact for assessing new workplace products and tools.
12. Project Support for EUC Transition: Support the workplace team and Transition Manager during EUC-related transitions, ensuring a smooth process.

Qualifications & Requirements:

• Education: Degree or diploma in Computer Science or IT.
• Experience:
  • Minimum of 3 years in Microsoft 365 technologies, with significant experience in supporting M365 users.
  • Hands-on experience with Microsoft Intune (including packaging, deployment, reporting, troubleshooting, policy creation, and patching).
• Certification: MS Azure-related certification is mandatory.
• Technical Skills:
  • Proficiency in IT networking for first-level troubleshooting.
  • Knowledge of MS Windows, M365, desktop hardware, and network environments.
• Soft Skills:
  • Strong organizational and interpersonal skills with a customer-oriented approach.
  • Effective verbal and written communication skills.
  • Ability to work independently, manage tasks under pressure, and deliver quality work.
• Flexibility: Willing to work a flexible schedule and travel as needed to multiple sites.

Job Responsibilities:

Architecture

• To provide architectural expertise thereby driving change and improvement in technology and process.
• To contribute to the development of the SSO and LDAP technology roadmaps.
• To liaise with architecture teams in undertaking architectural reviews
• To stay abreast of emerging technologies and technology trends.
• To automatize the process to accelerate the delivery time

Project Delivery

• To take responsibility for the delivery of key projects around SSO and LDAP which are aligned to drive significant change within the platform.
• To work with the Application Production Support project managers in defining, designing, documenting and implanting new functionality for existing and new applications.
• To liaise with the Application Developers in low-level diagnosis of on-going issues.
• To provide subject matter expertise on SSO and IDM technologies to all business application teams.
• To act as technology evangelists for the improvement of process and technology in use for the Authentication services within the client.

Platform Support and Maintenance

• Pro-actively monitor, manage and improve availability and performance of the production environments (from presentation and application layers to Infrastructure layers)
• Pro-actively manage the capacity of production applications

Incident and Problem Management

• To work with partner teams to conduct analysis of major and critical incidents.
• To identify tactical or strategic improvements that can be introduced to help reduce the number of on-going incidents within the SSO and LDAP area.

Change Management

• To work within the change management framework adopted by the client to ensure that all changes to the production environment are planned and executed in a controlled manner.
• To take responsibility for the quality of changes within the SSO and IDM environments, ensuring that changes raised are of sufficient standard in terms of technical and planning detail.
• Attending and sharing knowledge / updates in the Weekly Change Control Board Meetings and the Weekly Problem Management Meetings.

General

• Perform pre-assigned tasks to accomplish the function responsible for. The nature of these tasks are Change The Bank or Run The Bank
• Work cooperatively with the other members of the team
• Ensure adherence to processes and procedures
• Request improvement of knowledge (training) when needed
• Apply own initiative, within the levels of acceptable risk
• Whenever in doubt, escalate and seek advice and guidance
• If the nature of the position is user-facing, then all the guidelines and principles of user service mentality and behaviour should be applied
• Escalate risks / issues to the manager of the team
• Minimise operational failure, including but not exclusively, the risk of fraud, by helping to devise, and by implementing, sufficient regular controls.
• Ensure appropriate escalation to management and/or Permanent Control (or Compliance as appropriate) as soon as an issue is identified.
• Provide a direct contribution to the client operational permanent control framework.

As this is a production support role, focusing across a range of different and mostly innovative technologies, candidates must possess the aptitude and desire to learn. In addition, ability to be on call and provide support out of hours is essential.

Job Requirements

Essential:

Technical Skills essential for the role include, but not limited to:

• CA Siteminder Web SSO
• SOA security - SAML / WS-Security
• Autoprovisioning tools such as BMC ControlSA, Sailpoint, or Forgerock
• LDAP
• Kerberos / SSL/TLS / PKI / GSS-API / SPNEGO
• oAuth2, OpenIDConnect
• IIS/WCF/WIF, WAS security models
• Infrastructure standards for network load balancers, servers, networks and storage
• Automation mind-set with experience in using tools like Ansible
• Scripting skills using Python/JS or shell
• Application Server : Good exposure in configuring and supporting web technologies such as Tomcat, Apache, nginx, IIS
• Proven logical and methodical problem analysis and troubleshooting skills
• Working with an industry recognised service desk and project management toolset
• Clear communicator in both written and oral forms

Desirable:

Technical Skills desirable for the role include:

• Axway Security gateway
• SQL, Database schema
• Authentication services for APIs
• Exposure to Apigee API gateway
• Knowledge of Process & Quality management, ITIL v2/v3
• Microsoft Project, Advanced Excel, PowerPoint and Word
• Knowledge of Atlasian Jira Task Management toolset
• Previously used ServiceNow as a Service Desk Management product

Soft and Interpersonal Skills:

• Very strong analytical skills
• Strong attention to detail
• Structured and methodical mind-set
• Ability to operate with demanding Senior IT Management
• Can do attitude; look at changes as opportunities to improve
• Team oriented
• Good interpersonal and communication skills

Languages:

• High English spoken and written fluent (B2/C)
• French spoken and written will be valued

Qualifications:

• Bachelor in Computer Science or equivalent
• ITIL Foundation certificate will be desirable

Others:

• On Site Services: From 8:00 to 19:00 schedule to cover in weekly shifts of 8 working hours/day
• On Call Services: Out of regular schedule, we provide On Call services (out of business hours) to be covered in weekly shifts by team members.
• Public Holidays: Team members must cover all public holidays except 1st January and 25thDecember (2 persons only in shifts)

Our client is an established Offshore Facilities and Components provider, serving the offshore energy companies, operating all over the world.

It is currently looking for a Lead Piping Engineer for its Singapore’s office.

Job’s Highlight:

· Global company in O&G industry

· Competitive salary

· Medical insurance included Vision & Dental insurance

· AWS/ Bonus

· Equal opportunity| conductive and productive working environment

· Location: North Buona Vista Drive| Nearest MRT Station: Buona Vista MRT

Role:

· The Lead Piping Engineer is to have a strong background in piping design engineering, with the ability to lead and mentor a team of engineers and designers.

· The Lead Piping Engineer is to be conversant with widely recognized piping design requirements, codes and standards which is to be applied to Single Point Mooring (SPM), Topside and Subsea systems. Furthermore, shall be conversant in subsea pipeline design and selection, able to understand load interfaces of the subsea pipelines as well as other interfaces like soil and structural interactions.

· The Lead Piping Engineer is to have a strong background in piping engineering, with the ability to lead and mentor a team of engineers and designers.

· The Lead Piping Engineer is to be conversant with widely recognized piping design requirements, codes and standards which is to be applied to Single Point Mooring (SPM), Topside and Subsea systems. Furthermore, shall be conversant in subsea pipeline design and selection, able to understand load interfaces of the subsea pipelines as well as other interfaces like soil and structural interactions.

· The Lead Piping Engineer should ideally have experience of working in a shipyard environment and have shipyard experience.

Core Responsibilities:

· Technical Lead in developing Piping system design on Single Point Mooring Systems and other product offerings.

· Lead, mentor, and develop a team of piping engineers and designers, fostering a collaborative and high[1]performance work environment.

· Provide technical guidance and support to team members, ensuring adherence to industry standards and best practices.

· Conduct regular team meetings to review project progress, address challenges, and share knowledge. Manage the entire lifecycle of piping systems design deliverables, from the Tendering phase and Front-End Engineering Design (FEED) to EPC (Engineering, Procurement, and Construction) execution.

· Ensure that designs comply with project requirements and that all milestones and deadlines are achieved.

· Continuously monitor project progress, identify potential risks, and implement effective mitigation strategies to ensure successful completion of the project.

· Lead the preparation of essential PIPING SYSTEM DESIGN calculations and deliverables for EPC projects. This includes, but is not limited to, piping and instrumentation diagrams (P&IDs), piping specifications, datasheets, sizing, stress, and pressure drop calculations. Possess some knowledge of process engineering to enhance the integration and effectiveness of piping system designs.

· Oversee the entire piping system vendor requisition process, such as preparation of technical specifications and requirements, from quotation, evaluation, selection, installation, and delivery. Implement cost-saving initiatives and value engineering practices to optimize project budgets. Drive continuous improvement efforts within Piping discipline.

· Travels occasionally to sub-contractor facilities to attend Factory Acceptance Tests and fabrication support respectively.

HSEQ Requirements and Code of Conduct:

HSEQ: Complies with the client's HSEQ Code of Conduct as described in the HSEQ Policies, the 14 HSEQ Standards, and the HSEQ Procedures to always protect people and the environment. Has a duty of care to JOB DESCRIPTION ensure that all personnel work in a manner that is not harmful to their own health and safety and the health and safety of others.

Compliance: Complies with the client's Group Policy Code of Business Conduct and Ethics and expected training at all times.

Financial and Operational Dimensions/Impact and Decision-making Authority:

No budget responsibility, however commercial attentiveness is required as the role requires handling of high value equipment as well as understanding the technical selection has financial consequences.

Minimal Supervision: Objectives, priorities and deadlines are defined

Due to the safety-critical nature of handling hydrocarbons within the client's product line, meticulous attention to detail and a strong sense of technical ownership are essential for ensuring the operational safety of our facilities.

The Lead Piping Engineer must exemplify these qualities, demonstrating exceptional commitment to safety and precision in all aspects of their work.

Work Relationships:

Cultivate good working relationships with technical professionals, including engineers and designers, both within the organization and externally. External relationships include interactions with clients, contractors, and vendors.

Able to guide the development of direct reports, as well as other technical or non-technical team members.

Willing to share opinions, ideas, resources with others and provide constructive feedback and coaching. Foster commitment in the face of major obstacles.

Must be able to communicate well with all parties this role interacts with.

Job Challenges and Problem Solving:

Basic understanding of SPM (Turrets and CALM Buoys) system design aspects is required to work with the relevant disciplines to solve issues which arise. In office and out-of-office self-study of SPM systems is expected to achieve a high level of competency.

Some off-office working hours are expected to communicate with Houston Head Office for project planning and solving issues.

Requirements:

· Educational Qualification: Bachelor’s Degree in Engineering.

· 10 to 15 years relevant experience in Piping/Mechanical Engineering.

· Relevant Experience: Possess hands-on experience of at least 5 years as Lead Piping Engineer of large sized FPSO/Offshore platform/Topsides Modules projects

· Language Proficiencies in English & Chinese as he/ she needs to communicate with the Chinese speaking clients, stakeholders, vendors and staffs

· Software skills: Software: Aveva E3D, Advanced Autocad Skill, Caesar II, Microsoft Word and Excel

· Key Behaviors: Leadership, Good sense of Ownership, Communication, Commitment, Customer Focus, Team Player

· Working Conditions: Office Environment (Working Hours: 8 am to 6 pm). Possible exposure to hazards such as noise, heavy equipment, temperature extremes, chemicals, etc. if working in fabrication or installation sites.

· Can work effectively in a fast-paced atmosphere with multiple priorities and constant change.

(NB: No quotas for the foreigners.)

NB: NO QUOTA FOR THE FOREIGNERS PLEASE.

• This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.
• Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role @ [email protected]/ [email protected] and send your updated CV in MSWORD with the following information: Nationality, Full name, Total yrs. of exp., relevant work exp. for how many yrs., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.

Venture Cove Pte. Ltd.

(EA License # 21C0547| UEN: 202103896W)

138 Robinson Road, Singapore 068906

Website: http://www.venture-cove.com/

A career at PwC is more than “just” a job. It’s about being part of a culture that is committed to making a difference for each other, our clients, and our community — by empowering you to be the best version of yourself and investing in your growth. You’ll be able to develop as a leader, be well-connected, work in a great environment, explore our benefits and make a positive contribution.

With PwC, you’ll ignite a meaningful career while being supported by a strong coaching and people-oriented culture, our Flex policies (Flex Space, Flex Dress and Flex Time), innovative learning and development programs (training programs, digital upscaling) as well as our secondment opportunities. If you would like to be involved in activities outside of work, you can join our Sports and Recreational Club, Toastmasters and more!

How will you value-add?

The Independence Office is responsible for processes that include interpretation of policy, communication, consultation and disciplinary actions in support of compliance with independence policies by firm's partners and employees.

Checkpoint is the main independence platform used to assist the firm’s partners and employees manage their independence. It is a web-based, automated tool that identifies investments that might impair independence and indicates the action required, if any, for a PwC individual to avoid or resolve a violation.

Your role is to provide administrative support to the Independence Office, primarily in respect of administration of the Checkpoint system for PwC Singapore partners and staff.

Responsibilities:

1. Provide support to the administration of Checkpoint:

• Review various exception reports and investigate anomalies
• Research and review permissibility of securities
• Manage self reported matters
• Perform data quality checks
• Liaise with the Acceleration Center staff who assist with Checkpoint monitoring activities

2. Other duties:

• Compliance monitoring activities such as independence compliance testing support
• Report extraction / Filing
• Compile reporting information
• System updates
• Ad-hoc projects

About you:

• Holding at least a Diploma-level qualification.
• Candidates with previous administrative working experience will be preferred.
• Good communication skills (written and oral) in managing daily communication with partners and staff and other PwC network firms
• Good working knowledge of Microsoft Office (Excel in particular).
• Good project management skills, ability to manage project timelines and work independently with minimal supervision.
• Must have a positive attitude, be meticulous, organised, careful/discreet in handling sensitive information and able to work under pressure, including the flexibility to adjust and react to changing priorities

*Only shortlisted candidates will be notified due to the high number of applicants for this role.

Working Location: Jurong
Working Days : 5 Days ( Mon- Fri)
Working Hours: 8am-5pm

Salary: $2600 - $2700

Job Description

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Our client’s principal activities are to provide Clients with Full Turkey Project Management. This includes engineering, project management through the pre-construction planning, critical path development, construction / fabrication / site management, commissioning and hand over. It has executed a wide range of major projects involving Marine FPSO Conversion/Process Module Construction related to Oil and Gas Industry, Sub-Sea Products, Semi-Submersibles, Repair of Oil Rigs, Pharmaceutical Process Packages and Power Generation Facilities since its foundation in 1990. This vast experience and Total Commitment to Customer Satisfaction has since earned it a strong reputation in the industry as a reliable local business partner that aspire to exceed our clients’ expectations.

It is looking for a Lifting Engineer.

Job Highlights

• Listed Company with Good Benefits
• Career Growth Opportunity |Trainings for Career Growth
• Competitive compensation benefits
• Cultural Diversity in all departments
• Conductive and Friendly Working Environment
• Permanent role
• Location: Gul Rd, Singapore| Company’s transport available: Pick up service @ designated places

Job Description

Responsibilities:

· Develop a Non-Routine Lifting program and advise the Construction Manager accordingly.

• Develop specific Lift Plans.

• Liaise with the Engineering Department for engineering calculations and drawings as required to develop specific Lift Plans according to his Lifting program.

• Prepares procedure in coordination with vendors for internal shifting and load out operations.

• Wart management for project cargo loading and offloading operation active projects, load out operations by floating crane and Roll on load outs.

• Attend JSA meeting and client RA meeting for the assigned project and report to Section Head/Lifting Superintendent/Production Manager/GMO.

• Assist Engineer in preparing yard layout drawing for module location as per construction and load out sequence by confirmed projects and assisting tender department in lifting and load out feasibility check.

• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.

• Liaise with Lifting / Rigging Superintendent on a day-to-day basis for work progress.

• Liaise with client representatives, classification society surveyors and others to comply with inspection requirements.

• Resolve any technical problems or issues faced at the work site

• Ensuring that the ground conditions are safe for any lifting operation to be performed by mobile cranes.

• Any other ad-hoc duties being assigned by your Superior.

Requirements:

· At least 8 years of experience as a Lifting Supervisor.

• Experience and knowledge in heavy lifting.
• Adaptable to fast paced work environment, able to work under pressure, able to finish assigned work on time
• Excellent written and good communicative skills, able to interact with people of all levels and teamwork
• Must have the relevant certs: Lifting Supervisors Safety Course and Work-At-Height Certificate, etc.
• No job hopper please| Profile with stable working history
• Can start immediate or short period.

Job Related Information:

• Permanent| 5.5 days’ work week | Monday-Friday 8am-5pm, Saturday 8am-12pm
• Head-Office’s Location: 45 Gul Rd, Singapore 629350.

Salary & Benefits

• Monthly Basic Salary: Based on expertise, academic qualification and skills
• OT pay entitlement: OT Flat rate S$8/- per hour
• Healthcare benefits such as Outpatient, Dental, Health Screening etc.
• Cover with insurances, Personal Accident, Hospital & Surgical, Term Life and Work Injury policy
• Variable Bonuses
• 14 days Annual Leave and 14 days sick leave
• Birthday leave / Festival eve half day leave
• NTUC membership – Applicable for only Permanent confirmed staff
• Company transport provided at 5 pickup points:

-Bukit Batok MRT

-Jurong East MRT

- Boon Lay MRT

-Choa Chu Kang MRT (only Morning pickup)

- Woodland MRT (only Morning pickup)

NB

NO QUOTA FOR THE FOREIGNERS PLEASE.

• This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.
• Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role @ [email protected]| and send your updated CV in MSWORD with the following information: Nationality, Full name, Total yrs. of exp. relevant work exp. for how many yrs., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.

Venture Cove Pte Ltd (EA License 21C0547)

138 Robinson Road #12-03 Oxley Tower, Singapore 068906

LinkedIn: http://www.linkedin.com/in/venture-cove-681891249/

Website: http://www.venture-cove.com/

Job Description & Summary

A career in Technology Risk & Quality will provide you with an exciting opportunity to support one of PwC’s key business strategies and contribute towards shaping the firm’s technology risk management strategies in an evolving technology landscape.

The Technology Risk & Quality team provides advice and guidance to PwC digital teams to help them identify and manage the risks associated with the procurement, development and use of technology solutions (including emerging technologies) internally by the firm or as part of the service delivery to PwC’s clients, in accordance with PwC’s policies and standards.

We are currently seeking a suitable candidate to join the team as a Manager. You will work with other team members to help various business and project teams navigate and comply with the requirements of the firm’s technology risk assessment and approval process for the procurement, development and use of new technology solutions. You will help teams to articulate technology risks for the technology solution and to engage with specialist functions in the firm to identify risk mitigation measures and manage risk.

As a manager, you will be expected to help ensure the firm’s compliance with various network technology risk management policies and standards which includes developing and maintaining risk and quality compliance processes, tools and templates.

You will be involved in a broad range of activities which includes working with internal and client facing teams across all the Lines of Service and specialist functions in the firm and the PwC network.

You will provide guidance to business and project teams to identify, assess and advise on the various aspects of technology related risks.

The role will include the following responsibilities:

• Review technology risk assessments and discuss issues with the Technology Risk Director and/or Risk & Quality Partner
• Provide sound advice to PwC professionals across the Assurance, Tax and Advisory practices as well as Internal Firm Services who seek Technology Risk Management input when onboarding or developing new technology solutions
• Develop and/or update solutions to common queries, including relevant practice aids and templates
• Work closely with the Technology Risk Director to plan, design and implement technology risk management processes for the firm
• Provide support, education and training to staff to build technology risk awareness within the firm
• Prepare monthly reports and statistics for internal reporting

Preferred Knowledge/Skills:

• At least 5 years of experience within PwC, another Big 4 or mid-tier accounting firm or relevant industry
• Excellent oral and written communication skills with the ability to provide well-reasoned responses to all personnel grade levels in the firm and across the network
• Strong project management skills with the ability to manage multiple tasks and projects, even when under pressure
• Strong analytical and problem solving skills
• Strong stakeholder management skills
• Be open and adaptable to working in a changing environment
• An excellent team player with the ability to work well with other team members, including sharing and collaborating effectively with others, as well as creating a positive team spirit
• Possess the ability to empathise with the pressures and motivations of client facing colleagues and an ability to win their support with pragmatic advice to bridge the expectations of the business and the requirements of risk management
• Possesses a high level of accuracy and attention to detail
• Takes initiative but keep others informed of progress and escalate issues where appropriate;
• A drive to keep up to date in a fast-paced technology landscape and a sound understanding of how technology can drive efficiency, augment existing services and open new opportunities for the business
• Be an effective coach to junior team members
• Possess a keen desire and ability to learn and deliver timely and quality results to internal clients
• Past experience with technology risk management, general risk management, technology contract review, IT audits, internal audits or compliance will be advantageous, but not mandatory

Language requirement:

Fluency in both spoken and written English.

About Everest

Everest Group, Ltd. (Everest), is a leading global reinsurance and insurance provider, operating for nearly 50 years through subsidiaries in North America, Latin America, the UK & Ireland, Continental Europe and Asia Pacific regions. Throughout our history, Everest has maintained its discipline and focuses on creating long-term value through underwriting excellence and strong risk and capital management. Our strengths include extensive product and distribution capabilities, a strong balance sheet, and an innovative culture. Our most critical asset is our people. We offer dynamic training & professional development to our employees. We also offer generous tuition/continuing education reimbursement programs, mentoring opportunities, flexible work arrangements, and Colleague Resource Groups.

About the Role

We are seeking a dedicated and detail-oriented Account Analyst (Credit Control) for a 6-month contract role to cover maternity leave. This is a fantastic opportunity for fresh graduates who are eager to gain experience in the finance sector, particularly within the reinsurance industry.

In this role, you will be responsible for managing technical payments, insurance and reinsurance accounting matters, and handling a portfolio of direct and intermediary accounts accounts. If you thrive in a dynamic environment, eager to learn, and are passionate about finance, this role could be a great fit for you.

Key Responsibilities

• Account Management: Manage and reconcile insurance and reinsurance receipts and payments for your assigned portfolio.
• Reconciliation: Reconcile AR/AP balances, ensuring accurate analysis and timely settlements of receivables/payables.
• Payments Processing: Initiate and process payments, including wire transfers via JPMorgan ACCESS, Xuber, and Oracle.
• Stakeholder Communication: Provide prompt responses to questions from both internal and external stakeholders.
• Technical Liaison: Collaborate with technical assistants to resolve issues like non-receipt of settlements.
• Financial Reporting: Assist in monthly reconciliations, including Xuber entries in Oracle, and the preparation of HK revaluation and SG cash reports.
• Team Collaboration: Work closely with other team members to provide support and handle adhoc tasks as needed.

Qualifications & Skills

• Bachelor's degree or Diploma in accounting, finance or business is preferred
• Experience in credit control or a related field is ideal, but we also welcome fresh graduates or those seeking internship experience.
• Strong attention to detail and ability to reconcile complex accounts.
• Confident communicator with strong verbal and written skills to manage stakeholders.
• A team player who can also work independently to achieve goals.
• Ability to thrive under pressure, meet deadlines, and handle changing priorities.
• Familiarity with Microsoft Excel and other standard technology tools.

Our Culture

At Everest, our purpose is to provide the world with protection. We help clients and businesses thrive, fuel global economies, and create sustainable value for our colleagues, shareholders and the communities that we serve. We also pride ourselves on having a unique and inclusive culture which is driven by a unified set of values and behaviors. Click here to learn more about our culture.

• Our Values are the guiding principles that inform our decisions, actions and behaviors. They are an expression of our culture and an integral part of how we work: Talent. Thoughtful assumption of risk. Execution. Efficiency. Humility. Leadership. Collaboration. Diversity, Equity and Inclusion.
• Our Colleague Behaviors define how we operate and interact with each other no matter our location, level or function: Respect everyone. Pursue better. Lead by example. Own our outcomes. Win together.

All colleagues are held accountable to upholding and supporting our values and behaviors across the company. This includes day to day interactions with fellow colleagues, and the global communities we serve.

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Conduct system performance tests, data analysis, and troubleshooting to ensure optimal functionality of mechanical, software, and hardware components.
• Execute validation protocols for automated systems, ensuring compliance with industry standards and regulations.
• Collaborate with cross-functional teams, including design, manufacturing, and quality assurance, to identify validation requirements and methodologies.

Requirements:

• Diploma and above
• At least 2 years of experience in validation engineering, particularly with automated systems.
• Experience with robotics, control systems, or advanced manufacturing technologies.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Responsible for the design of controls system and programming coding.
• Modify controls design and other documents according to the company standards and compliance to industry standards.
• Develop specific program as per project requirements based on company coding standard.
• Support in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.

Requirements:

• Diploma in any relevant engineering discipline
• At least 5 years of PLC experience in using Allen Bradley and Siemens-S7 programming.
• Good communication and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a distributor of automotive and industrial solutions.

• Manage and configure network devices such as firewalls, routers, VPNs, internet proxies, and wireless networks.
• Optimize enterprise networking, including WAN, LAN, and VPN implementations and support.
• Monitor system performance and troubleshoot issues to ensure optimal performance and reliability.

Requirements:

• CCNA certified
• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of experience in Infrastructure Engineering.
• Good knowledge with internet architecture designs (TCP/IP, DNS, DHCP, Proxy and Firewall).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

Team Introduction

The Global Security Organization provides industry-leading cybersecurity and business protection services to TikTok globally. Our organization employs four principles that guide our strategic and tactical operations. Firstly, we champion Transparency & Trust by leading the charge in organizational transparency, prioritizing customer trust, and placing user needs first. Secondly, we aim to maintain Best in Class Global Security by proactively identifying and reducing risks while enabling innovative product development. We constantly work towards a sustainable world-class security capability. Thirdly, we strive to be a Business Catalyst & Enabler by embodying the DNA of technical innovation and ensuring our Global Security operations are fast and agile. Finally, we Drive Empowered & Risk-Informed Decision Making by providing our leaders with the necessary information to make agile decisions based on risk.

Security Tools Operations and Validation team's responsibilities include designing and implementing IT security solutions that address the organization's needs, assessing risks and vulnerabilities, and developing strategies to mitigate them, validation of security technical controls.

The role will be responsible for leading the design, architecture design and implementation of our state to the art Security Tech Validation Framework. And setup the technical supporting team including product team, development team, domain validation teams, validation operation teams etc. The validation framework and validation in security domains will provide solid platform support to GSO's maturity measurement effort. And by implementing the validation of different security domains, the role will make sure the security requirements by GSO are implemented in all of TikTok's business.

Responsibilities

- Architect, design, and implement open and scalable security validation frameworks to automate security testing, validation, and reporting processes

- Implement security validation in different security domains, including network security, cloud security, endpoint security, Secure SDLC, Identity and authentication etc.

- Design and implement domain specific validation infrastructure and utilities

- Prioritize the target validation domains, working with a cross function team

- Setup the supporting teams for technical control validation, including operation team, SRE team etc

- Working with inside/outside service providers to find solution with the best ROI

- Setup validation strategy according to stakeholder's requirements

- Make the SLA of validation framework and implement

Qualifications

Minimum Qualifications:

1. A bachelor's (master's preferred) degree in computer science, information technology, cybersecurity, or a related field is usually required.

2. Strong experience with security automation frameworks and tools (e.g., Selenium, Ansible, Jenkins, Chef, Puppet).

3. Strong product or development experience in security testing tools (SAST, DAST, IAST, RASP, WAF, HIDS etc).

4. Strong understanding of Secure SDLC with best practice in industry

Preferred Qualifications:

1. Proficiency in at least two programming languages: Python, Java, Go, Bash, C/C++, shell; Having excellent debugging skills

2. Good knowledge of BAS(Breach As a Service) like frameworks

3. Broad knowledge of all security domains

4. Excellent team-working skills are needed. Previous successful working experience through different time zones is a plus.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.