You will work in the Environmental Health Institute, and be a key member of the Facility & Safety Management Section, overseeing facility support and safety management across multiple locations (Biopolis,Techplace II and Van Kleef Centre). This role encompasses a wide range of infrastructure and built environment responsibilities, making it ideal for engineers looking to apply their expertise in a dynamic research setting.

This job might be for you if you possess the following qualities:

• Lead strategic planning and coordination for establishing and maintaining specialised laboratories, ensuring alignment with organisational objectives and timelines.
• Develop and manage comprehensive project budgets, oversee financial planning, cost control, and resource allocation for laboratory establishment and maintenance projects.
• Create detailed project plans for laboratory establishment and maintenance, including scope definition, objectives, timelines, and resource requirements.
• Conduct cost-benefit analyses for proposed projects and initiatives, ensuring efficient use of resources and alignment with budgetary constraints.
• Oversee the design, installation, and maintenance of critical infrastructure systems, with a focus on Air Conditioning and Mechanical Ventilation (ACMV), and specialised laboratory equipment.
• Manage building automation systems to enhance facility performance and user comfort.
• Implement and oversee quality assurance processes to ensure specialised laboratories meet stringent quality standards and regulatory requirements.
• Identify potential risks associated with laboratory operations and develop robust mitigation strategies for safe handling of hazardous materials.
• Develop and implement sustainability initiatives across facilities, integrating innovative engineering solutions to optimise building performance and energy efficiency.
• Monitor and report on environmental performance metrics, including energy consumption and waste generation.
• Facilitate effective communication with stakeholders, including researchers, consultants, contractors, equipment suppliers, and regulatory authorities.
• Participate in corporate projects and perform administrative tasks as assigned.

Job Requirements:

• Degree in Mechanical Engineering. Candidates with degrees in other engineering disciplines (e.g., Electrical, Civil, or Environmental Engineering) with relevant experience will also be considered.
• Experience in facility infrastructure management, particularly in specialised laboratory or research environments.
• Expertise in designing and managing ACMV systems, and other critical building systems.
• Strong background in project management, particularly in complex built environments.
• Thorough understanding of regulatory requirements for specialised laboratories, including safety protocols for handling hazardous biological and chemical materials.
• Experience with Government Procurement practices, including green procurement initiatives.
• Proficiency in building management systems and CAD software.
• Strong analytical and problem-solving skills to address complex infrastructure challenges.
• Passion for driving sustainability in scientific research environments.
• Knowledge of green building standards (e.g., Green Mark) and experience implementing energy-efficient solutions.
• Excellent interpersonal and communication skills.

Applicants will be updated on the status of their applications within 4 weeks of the closing date of this job posting.

To apply, please proceed to Careers@Gov at https://sggovterp.wd102.myworkdayjobs.com/PublicServiceCareers/job/NEA-BIOPOLIS-HELIOS/Senior-Engineer-Executive-Engineer--Facility---Safety-Management-Section-_JR-10000034932

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Position Overview:

We are seeking a highly motivated Embedded System Engineer to join our team as a Research Engineer. The successful candidate will be responsible for selecting, programming, testing micro-controllers, and building corresponding circuitry and PCB for our cutting-edge research projects. This role offers an exciting opportunity to contribute to groundbreaking research in flexible electronics.

Key Responsibilities:

• Program micro-controller for realizing target functions.
• Design circuitry and PCB for corresponding micro-controller.
• Help with requirement analyse and micro-controller chip selection.
• Document design processes, results, and findings for academic publication.
• Stay updated on emerging trends and technologies in flexible electronics and related fields.

Qualifications

Qualifications:

• Master C/C++, have proficient embedded development and MCU development capabilities, and good programming habits.
• Familiar with communication ports, including UART, SPI, IIC and GPIO.
• Able to read hardware schematics, capable for driver writing and optimization, and familiar with Renesas, Nordic and STM32’s commonly used chips;
• Familiar with BLE working principle and commonly used BLE chips.
• Familiar with micro-controller developing tools (e.g. Keil, IAR)
• Experience with PCB design and proficiency in PCB design tools (e.g. Altium Designer)
• Bachelor's or Master's degree in Electrical and Computer Engineering, Electronics Engineering, Mechatronic Engineering, automation, or related field.
• Solid digital and analogue circuit knowledge foundation.
• Excellent problem-solving skills and attention to detail.
• Effective communication and collaboration abilities.

Preferred Qualifications:

• Expertise in MATLAB or Python for upper computer software development.
• Familiarity with biomedical signal processing or wearable electronics.
• Prior research experience in an academic or industrial setting.
• Additional expertise in wireless electronics design

Benefits:

• Competitive salary based on qualifications and experience.
• Opportunities for professional development and growth.
• Collaborative and innovative work environment.
• Access to state-of-the-art research facilities and resources.
• Potential for authorship on research publications, patents and presentations.

• Designing and developing: Designing, developing, installing, managing, and maintaining equipment for monitoring and controlling engineering systems
• Ensuring safety: Ensuring that systems and processes operate effectively, efficiently, and safely
• Collaborating: Working closely with colleagues across several functions, including operations, purchasing, and design
• Preparing documents: Preparing and maintaining engineering project schedules, documenting and controlling engineering deliverables, and writing reports and documentation
• Analyzing data: Analyzing and interpreting data
• Providing technical support: Providing technical support

Job Description & Requirements

Responsibilities

• Management of approval, process and documentation for utilities & services.
• Liaise with utility agencies/authority on services/ relocation/installation of utility and services.
• Supervise utility diversion and trial trench works.
• Ensure safe and uninterrupted utilities supply to site.
• Develop operational SOP/Procedures for utilities/services works.

Requirements

• Degree in Civil Engineering or Mechanical Engineering with minimum 3 years of experience in underground utilities matter.
• Understand basic code compliance in Architectural, C&S and M&E works and construction sequence of work.
• Registered earthwork supervisor with EMA/SPPG and with relevant road construction experience.
• Positive attitude and good discipline and good team player
• Good interpersonal skills
• Preferred Candidate with LTA experience

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Fellow will work closely with the Principal Investigator, Dr. WU Zhe, on several research projects of optimization of chemical and manufacturing processes through machine learning tools
• The Research Fellow will help to develop both theoretical and simulation study of machine-learning-based control and optimization algorithms to chemical processes.

Job Requirements

For Research Fellow Position:

• A PhD degree in a relevant area, e.g., Control Engineering, Chemical Engineering, Automation, Systems Engineering, Computer Science or Applied Mathematics;
• Good publication record;
• Experienced in advanced process control, machine learning, and programming languages (e.g., python, Matlab, C++, etc)

About the Role:

This position has responsibilities for the deployment and standardization of key Quality Assurance activities including assurance of product quality, quality planning process, and maintenance of Quality Management System performance. This role will carry out responsibilities in strict adherence to regulatory requirements and applicable standards relevant to medical device, and always act with focus on quality objectives within the organization.

Roles and responsibilities:

• Functional lead for implementation, managing operational effectiveness of Complaint Handling process, trending activities, and analysis of data associated with defined KPIs.
• Responsible for monitoring and implementation escalation process and resolution for late medical device reports caused by late entries by local intake team.
• Analyze and recommend complaints received are reportable within the market, ensure adverse events reported to Authority if needed, with special attention to managing complaint-adverse event with close follow up with manufacturer and/or reporter.
• Execute, coordinate and feedback Field Corrective Action/Recalls with the countries, maintain tracking to monitor field actions in the region to ensure effective resolution or closure. Report Field Corrective Action to Authority if needed.
• Support audit readiness, conduct and prepare for regulatory/external audits as well as internal quality audits to ensure timely execution according to defined schedule.
• Participate of Nonconformity, Corrective and Preventive Actions, Documentations, Supplier Quality across the organization.
• Develop/update procedures for quality system processes to ensure alignment with Olympus global procedures as well as coordinate with other departments that effect Quality Systems.
• Provide training and support to employees concerning quality systems, policies, procedures, and core processes etc.
• Support global and local quality improvement initiatives and transformative projects.
• Execute other tasks and projects, as assigned by Manager.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Bachelor’s degree in related field of engineering, science, or equivalent discipline.
• At least 5 years of experience working in similar position of responsibility in the medical device quality field
• Prior experience in managing quality management system in a medical device environment and quality assurance/regulatory compliance
• Must have knowledge to perform quality audit, certified auditor in ISO13485 or GDPMDS will be a plus.
• Strong knowledge of quality system requirements and medical device regulatory framework
• Meticulous and strong attention to details
• Excellent verbal and written communication skills
• Good problem solving and ability to drive change within organization
• Ability to succeed in a fast-paced, matrixed environment with speed, accuracy and adaptable to meet business need
• Positive attitude and able to work well as team player

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

• LinkedIn - Olympus APAC
• Company website - www.olympus.com.sg

On behalf of the hiring company that is in the Built Environment OEM space, we are looking for suitable personnel to join them as Software Development Executives (electrical background):

Responsibilities :

• Software Design: Develop software for various vertical transportation systems, including Housing & Development Board (HDB), private, and modernisation systems. Refer to approved layout drawings, production requests, machine applications, client specifications, and electrical straight diagram drawings.
• Electrical Diagram Review: Interpret and verify electrical straight diagram drawings from the Hardware Design Department. Identify and report any inconsistencies or errors.
• Documentation and Communication: Issue notices, instructions, software documents, and contract-related materials as needed.
• Factory Support: Assist factory testing staff with job software design and technical troubleshooting during system testing.
• Design Optimisation: Ensure that software designs are cost-effective and fully comply with client specifications and project timelines.
• Error Investigation: Participate in investigating software errors and develop corrective and preventive measures. Collaborate with the Electrical Department to address any discrepancies between software and hardware designs and resolve issues before shipping the system to the site.
• Field Support: Assist system installation staff during on-site installations. Troubleshoot problems, and modify software as necessary to meet client requirements.

Requirements

• A diploma (at least 3 years) or degree in Electrical Engineering
• Familiar with programming languages such as C, C++, etc
• Familiar with schematic or single-line designs/drawings
• Able to work independently and as a team

Remuneration will be pegged to qualification and experience

Location: East (near to MRT station)

EA Licence : 22C0971 | EA Registration : R21101298

• Work closely with internal and external stakeholders to manage the technical risk, security operation and SOC.
• Act as IT security expert for department in the areas of cyber security assessments, PAM, Database, WAF, Firewall and EPP/EDR.
• Perform risk assessment and identify mitigation controls for the risk area identified.
• Enhance and build cyber threat detection user cases and assist in analyzing and reducing false positive.
• Identify infection/compromise in the company utilizing threat intelligence and indicators of compromise (IOCs) from different threat Intel sources and regulators.
• Ensure all compliance and security control functions are performed timely and orderly.
• Drive continuous improvement of procedures and processes related to cybersecurity process and operations monitoring.
• Track, monitor and valid security-related and risk issues, provide an action plan to rectify the issues and prevent recurrence.
• Generate security reports and metrics as required.
• Provide timely and periodic update to managements on its security matters.
• Stay current on the latest Cyber threats, Attacks and vulnerabilities etc.
• Good diploma or degree in Computer Science, Digital Forensic or Engineering preferred.
• Preferred minimum of 6 years of relevant work experience in IT security auditing or security operation role.
• Strong knowledge in internet infrastructure, networking technology and security (i.e. DNS, DHCP, Firewall, WAF, IDS, IPS, VPN, APT and TCP/IP protocols)
• Working experience with major SIEM will be advantage
• Strong practical experience in Cyber security: Cyber kill chain, TTP, threat intelligence, malware triages.
• Demonstrated ability to multitask and is detail-oriented with inquisitive mind during case investigation.
• Good team player with strong communication skills with project teams, stakeholders, senior management, and contractors including both technical and non-technical personnel.
• Professional security related qualification (e.g. CEH, ECIH/GCIH, and ITIL) will be favorable although not mandatory technical skills

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

Key Responsibilities:

Collaborate with cross-functional agile teams to design, develop, and deploy high-quality software applications, encompassing mobile and web frontends, and respective backends.

Champion best-in-class software engineering practices, including pair programming, code reviews, and test-driven development.

Lead technical discussions, architect systems, and mentor team members to foster expertise and excellence.

Requirements:

5+ years of experience as a full-stack developer, with a proven track record of delivering scalable and efficient solutions.

Expertise in modern web development using ReactJS, NextJS, TypeScript, and Kotlin/Java.

Proficiency in designing and implementing CI/CD pipelines and deploying applications on cloud platforms like AWS.

Familiarity with database migration tools and techniques (desired).

Experience working in Agile/Scrum environments (desired).

Excellent communication and interpersonal skills, with the ability to articulate technical concepts effectively.

Self-motivated and proactive, with a strong drive to innovate and improve.

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Minimum with 7 years relevant experience
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

What you will do

• APU Physical Design Implementation for APU partitions focus on MDLA/NDLA n5/n4/n3e/ process
• Physical VerificaTion to deliver clean APU partition gds N5/n4/n3e/ process
• Perform Timing Closure ECO for APU partition including PrimeTime timing check and twk timing ECO

What you bring

• Apr hands on for n5/n4/n3e process using Innovus and Fusion compiler EDA tool
• tcl/csh/perl/bash. programming skill
• Timing Analysis Debugging and Fixing skills
• Experienced N4/N3e process

Location: One North, Singapore

Why MediaTek?

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentaryvalidation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum 3 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

Manage construction of assigned projects from start of construction to Commercial Operation Date (COD), ensuring compliance with assigned targets in terms of schedule, cost, while making sure all the internal requirements (e.g. HSE) are fulfilled.

Responsibilities

• Track and monitor project schedules and budget, flagging out any potential deviations in terms of timings and costing, using the corporate tools and platforms
• Manage contractors and other third parties in an effective and efficient manner to ensure projects run smoothly
• Identify potential risks in terms of construction and progress, making sure these are flagged to the senior project manager
• Enforce quality checklists for review or inspection of solar projects
• Manage and interact with client throughout construction

Education/Experience

• Diploma or Bachelor’s degree in Engineering
• At least 3 years of working experience in construction / installation projects
• Prior renewable energy or construction industry experience, particularly solar preferred

Core Requirements:

• Proven track record of effective communications with project stakeholders
• Good project management skills with ability to report in a clear and concise manner
• Excellent interpersonal skills with strong verbal and written communication abilities
• Skilled in project management frameworks (eg. Gantt Chart/Scrum/PMP)

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:

As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:

• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

Essential Duties and Responsibilities

• Responsible for software development lifecycle activities, including system study, analysis, design, code, test, and deployment for product using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Work with project team members to identify product requirements and help define project scope, objectives, and plans accordingly.
• Write, analyze, optimize, and debug product application code to maximize performance and quality.
• Create automated unit tests and integration tests.
• Write and maintain the internal tools to diagnose software component issues, improve productivity of build and release.
• Document technical specifications and functional specifications
• Participate in agile planning and scope estimation for team projects.
• Mentor and execute in Agile, Lean, and Continuous Delivery best practices.

Requirements

• BS/MS in Computer Science/Engineering or related field
• 5+ years of software development experience in user interface application development using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Experience in turning designs into responsive UIs with ReactJS /HTML5 / CSS (LESS)
• Experience in leveraging development workflow with tools like npm, webpack and Node.js.
• Experience developing in Node.js development.
• Experience with design patterns, performance/memory analysis, multithreading.
• Agile / Scrum experience including TDD, unit testing, and continuous integration.
• Strong analysis and problem-solving skills.
• Excellent interpersonal skills including verbal and written communication skill.
• Communicates well in English.

Bonus

• Experience in WPF/WCF and MVVM programming
• Experience on creating webview2 UWP apps.
• Experience in integrating with RESTful APIs

Company Description

Warwick Machinery Singapore Pte Ltd is the official distributor for DN Solutions , a leading manufacturer of state-of-the-art CNC machine tools used to produce high precision parts. We offer wide range of turning center, vertical and horizontal machining center, multi–tasking machines as well as automation systems.

We also provide full service care and advanced support and consulting.

Role Description

This is a full-time on-site role as a Sales Specialist at Warwick Machinery Singapore Pte Ltd in Singapore. The Sales Specialist will be responsible for day-to-day sales activities, including prospecting, lead generation, product demonstrations, and closing deals.

Qualifications

• Proven experience in sales and achieving sales targets
• Excellent communication and negotiation skills
• Knowledge of sales strategies and techniques
• Ability to build and maintain client relationships
• Strong organizational and time management skills
• Understanding of market dynamics and trends

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

Position Overview:

We are looking for a passionate and motivated AI Engineer to join our team, focusing on innovative projects in image and video applications. In this role, you’ll contribute to the development and improvement of AI algorithms, working alongside experienced team members to create advanced solutions in image processing and computer vision.

Responsibilities:

• Assist in the development of algorithms for image and video processing, including tasks like image restoration, enhancement, and segmentation.
• Contribute to the design and implementation of computer vision and deep learning solutions, proposing ideas to improve algorithm performance and address practical challenges.
• Collaborate with software and hardware teams to support the optimization of algorithms for efficient, real-time performance on various devices.
• Participate in testing and refining algorithms to ensure they perform well across different conditions and environments.
• Work with software engineers to integrate algorithms into broader software systems, learning how to achieve smooth functionality and user experience.
• Stay updated on the latest advancements in AI and computer vision, sharing ideas that could be applied to future projects.

Qualification/ Requirements:

• Education: Master’s or Ph.D. degree in Computer Science, Electrical Engineering, or a related field.
• Relevant academic or project experience in image processing and computer vision, with hands-on work in areas such as image restoration, generation, enhancement, or segmentation.
• Proficiency in programming languages such as Python, with familiarity in deep learning frameworks like PyTorch or TensorFlow.
• Strong foundation in mathematical concepts, such as probability and optimization, with an eagerness to apply these skills in AI algorithm development.
• Enthusiasm for learning advanced AI techniques, including generative models (e.g., GANs, VAEs) and language-guided generation, with a proactive attitude towards skill-building.
• Effective communication skills and a collaborative mindset, with a passion for teamwork and innovation.
• Interest in image processing, computer vision, or multimedia technologies; personal projects or hobbies related to photography or similar fields are a plus.

Our client is a top-tier global pharmaceutical powerhouse, committed to pushing the boundaries of medical innovation and delivering breakthrough treatments to patients worldwide. Be a part of a mission to transform healthcare and make an impact on patients' lives.

As the Senior Production Engineer, you'll be at the forefront of R&D manufacturing operations.

Your Role:

• Manage R&D manufacturing operations and be a technical expert in the process.
• Refine manufacturing techniques, lead method validation projects, and be the go-to expert for training operators on Standard Operating Procedures (SOPs).
• Documenting crucial process safety and risk assessments, maintaining the highest standards of excellence.

Requirements:

• Background in a regulated manufacturing environment (pharmaceutical or biotechnology preferred).
• Master's or PhD in Chemistry, Chemical Engineering, or Pharmaceutical Sciences.
• 5+ years of hands-on experience in formulation development.
• In-depth understanding of GMP, process development, validation, and pharmaceutical quality systems.
• Proven track record in pharmaceutical formulation development and technology transfer.

If you are interested, please apply with your CV attached.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

ABOUT AMS

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the Project Team of TopSKY-ATC (HE).

ROLE DESCRIPTION SUMMARY

In this role you will work in an international multidisciplinary team focused on the Verification and Validation of the TopSKY HE product in order to confirm compliance to requirements and the fitness for purpose in accordance with Operational Scenarios. You will be responsible for the design and execution of the procedures and scenarios.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Verification and Validation Engineer, you are accountable for:

• Verification of the solution to confirm the system’s compliance to the Functional Baseline requirements
• Validation of the solution to confirm the system’s fitness for purpose in accordance with the Operational Concepts.
• Contribute in System Requirement Analysis activities to confirm requirements are testable and allocate a Verification Method(s) and Verification Phase(s), documented in the Verification Cross Reference Matrix (VCRM).
• Proactively participate in PI planning and backlog refinement including contributing to the effort estimation
• Conduct of the verification and validation tests in accordance with the Project Plan(s) and Project Schedule at the program’s relevant location (Thales ’premises, supplier premises and/or customer premises)
• Conduct of verification and validation tests during formal testing activities Acceptance Verification and Validation (AV&V) with the Customer.
• Communicate with both internal and external stakeholders for the V&V testing activities.
• Participate in System Requirement Analysis workshops, internally, with suppliers and with the Customer.
• Participate in Test Procedure Reviews and Test Readiness Reviews, internally, with suppliers and with the Customer.
• Report regularly on the progress of the testing activity against the agreed planning and budget
• Record the test results in the project Test Management System and any defects in the Defect Management System.
• Contribute to the Defect CCB by providing summary defect status and impact assessments
• Track and verify and validate defect corrections including regression testing.
• Maintain and retest test procedures as requirements are changed
• Produce Test Procedure Books and Test Reports.

· Support your Squad members (software, integration and verification)

· Support the Product Owner (PO) and Scrum Master (SM)

o Make recommendations on strategies to improve performance or productivity

o Identify risks, and proposing effective solution early and executing mitigation actions

o Provide input into the planning and coordination of program integration activities

• Contribute to the development of Policies, Processes and Procedures for the V&V activities best practice
• Leading Technical Working groups both internally and externally to define technical solutions
• Mentoring and support to all personnel involved in V&V activities, and contribute to succession plans for key V&V roles.
• Contribute to the development of V&V Engineering estimates for any modification proposals to the baseline in the context of projects/bids
• Work in accordance with the defined Thales processes and practices, and contribute to their improvement.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

• Degree in Engineering, Computer Science or related discipline

Essential Experience

· Test Engineering / Test Analyst experience of large, complex, real time software based systems (5+ years)

· Experience in Air Traffic Management Verification and Validation Scenario design and execution

· ATM experience in the following areas:

o Airspace

o Coordination

o ATM HMI

o Interpartition

o Adaptation/Configuration

· Experience with Air Traffic Management standards eg. ICAO, Eurocontrol, AID

· Application of domain knowledge to high value complex design, development and integration projects.

· Proven experience in conducting objective reviews of verification and validation artefacts

· Proven problem identification and analysis skills and system requirements analysis skills

· Experience in working in a multi-disciplinary integrated team environment

· A positive attitude combined with excellent interpersonal and motivational skills.

· Sound judgement and independent decision-making capability where necessary

· Excellent written and oral communication skills in English

Desirable:

· Experience in Air Traffic Management Operations

· Experience in System Engineering tools eg. DOORs, Jira

· Experience in Verification and Validation Tools eg. Vivaldi, Jira

· Experience in working in a Scaled Agile Framework (SAFe)

· International Software Testing Qualification Board (ISTQB)

· Advanced Test Analyst CTAL-TA Certification

· French Literacy

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.

In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

The role of the Principal Engineer is to assist the Head of MRO in planning and supervise MRO engineer. This role also needs to ensure and adherence to safety regulations, industry standards and trade compliance activities is carried out.

Primary Duties:

Reporting to Head of MRO, you will have the following key responsibilities:

• Assist the MRO Head in planning and executing MRO strategies, ensuring all activities align with organizational goals.
• Supervise MRO engineers, providing guidance and support to foster a high-performance culture within the team.
• Coordinate and liaise with customers on any MRO related matters.
• Identify areas for process improvement and implement best practices to enhance operational efficiency and reduce downtime.
• Ensure adherence to safety regulations, industry standards, and organizational policies throughout MRO operations.
• Assist in the development and management of the MRO budget, tracking expenditure and identifying cost-saving opportunities.
• Analyze maintenance metrics and performance indicators to inform decision-making and improve reliability of equipment.
• Liaise with suppliers and service providers to ensure timely availability of parts and services needed for maintenance activities.
• Support the training and development of MRO staff to enhance skills and knowledge in maintenance practices.
• Ensure adherence to all domestic and international trade regulations, including customs laws, export controls, and sanctions.
• Perform regular audits of trade activities and transactions and prepare reports for management and regulatory bodies.
• Oversee the maintenance of accurate and comprehensive records related to trade compliance activities

Key Attributes and Skills:

• Strong leadership and interpersonal skills.
• Excellent analytical and problem-solving Abilities.
• Strong organization skills with the ability to manage multiple priorities.
• Effective communication skills, both written and verbal.

Qualifications and Experience and Requirements:

• Bachelor’s degree in Electronics, Electrical, Mechanical Engineering, or a related field.
• Strong knowledge of international trade regulations, export controls, and customs compliance. (e.g. ITAR) or a related role is an advantage.
• Occasional overseas travelling is required.

Be part of a team of software engineers involved in making one of the world's most advance unmanned surface vessel and future marine technologies. We are a Singapore company with international connections. We are only looking for someone who is interested in being independent, creative and innovative and dare to try. You might also have a love for the seas and enjoy some real outdoor adventure. The job requires hardwork which means self motivation and those who fear this need not apply.

Your qualifications should involve a degree in computer engineering or equivalent but if you can demonstrate programming prowess, we are happy to consider.

We deal mostly in Python language, Java and C++ and we need someone who knows networking, TCP/IP well. Basically a fast learner can pick up these skills in a short time as long as you are willing to work hard for your own future.

We have many exciting projects in the pipeline.

Will you be that person?. Come for an interview and discuss your future now.