- To provide Desktop Windows upgrade from 10 to 11 (migration) and test of GPO Policy on Windows 11.

- Work with Desktop Team

-Atleast with 1 year experience is required in Migration and Upgradation

-Office hours

- To provide Desktop Windows upgrade from 10 to 11 (migration) and test of GPO Policy on Windows 11.

- Work with Desktop Team

-Atleast with 1 year experience is required in Migration and Upgradation

-Office hours

1. JOB DESCRIPTION

Job Title

Assistant Production Engineer

Job Description & Requirements

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Cconstruction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

We are seeking a dedicated andknowledgeable Quality Assurance Engineerwith specialized experience in the oil & gasand semiconductor industries. The idealcandidate will play a crucial role inensuring the quality, reliability, and compliance of our products and processesthrough rigorous testing and ISO audits.

Job Description：

• Develop and implementcomprehensive quality assuranceplans, procedures, and metricstailored for oil & gas andsemiconductor products.Conduct thorough quality inspections,audits, and evaluations to ensureadherence to industry standards andregulatory requirements, includingISO standards.
• Perform root cause analysis and leadcorrective and preventive actions(CAPA) to address quality issues andimprove processes.
• Collaborate closely with engineering,manufacturing, and supply chainteams to implement qualityimprovements and resolve quality-related issues.
• Maintain accurate documentation andrecords of quality tests, inspections,and audits.
• Drive continuous improvementinitiatives in quality assuranceprocesses and methodologies.
• Stay abreast of industry trends,technological advancements, andregulatory changes in the oil & gasand semiconductor sectors.

Requirements:

• Bachelor’s degree or Diploma in Engineering,Quality Assurance, or a related field.
• Proven experience in qualityassurance roles within the oil & gas and semiconductor industries.
• Strong knowledge of ISO standards(e.g., ISO 9001, ISO 14001, ISO 45001)and experience with conducting ISOaudits.
• Proficiency in quality managementtools and methodologies, such as SixSigma, Lean Manufacturing, or TotalQuality Management (TQM).
• Experience in performing quality inspections, audits, and evaluations incompliance with industry regulations.
• Familiarity with automated testingtools and software used in qualityassurance processes.
• Excellent analytical and problem-solving skills, with attention to detailand accuracy.
• Strong communication, interpersonal,and collaboration skills.
• Ability to work effectively in a dynamicand fast-paced environment,managing multiple priorities

Frontend Software Engineer (React.JS)

Location: Central

Working Arrangement: Hybrid

Remuneration Package: Up to $6,500 + AWS + Variable Bonus

About Us:

Join our innovative team as a Frontend Software Engineer and make an impact with your ReactJS expertise. We're looking for a creative and motivated individual to drive the development of engaging user interfaces and cutting-edge applications. In this role, you'll collaborate in a vibrant environment, shaping the future of our web applications while ensuring a seamless and enjoyable user experience.

What You'll Do:

• Transform Designs into Code: Convert design wireframes and visual mockups into high-quality, responsive code using HTML5, CSS3, and WebSocket.
• Develop and Maintain UI Components: Build, test, and maintain dynamic user interface components with a focus on performance and cross-device compatibility.
• Enhance UI/UX: Work closely with our design team to refine and enhance the user experience of our applications.
• Create Reusable Code: Develop modular and reusable front-end components and libraries to streamline future projects.
• API Integration: Connect with RESTful services to ensure smooth and efficient data exchange.
• Collaborate Across Teams: Partner with software engineers, business analysts, and architects to design and implement web-based solutions.
• Support and Maintenance: Deploy applications, provide ongoing support, and resolve any issues that arise during or after hours as needed.
• Optimize Systems: Improve the efficiency of applications, systems, and databases by understanding and enhancing their interdependencies.
• Continuous Improvement: Identify opportunities for process improvements and document your recommendations for team and stakeholder review.
• Ensure Quality: Follow best practices for high-quality development to deliver solutions on time and to specification.

What We're Looking For:

• Educational Background: Degree in Computer Science or a related field.
• Experience: Proven track record in developing web applications and workflows, with a solid grasp of modern JavaScript frameworks, especially ReactJS.
• Technical Skills: Proficiency in HTML5, CSS3, WebSocket, and RESTful APIs. Experience with Git for version control and knowledge of CSS pre-processors (SASS, SCSS, LESS) and bundlers (webpack).
• Collaboration: Ability to work effectively in a team setting, with strong communication and problem-solving skills.

If you're passionate about frontend development and eager to work in a collaborative and forward-thinking environment, we’d love to hear from you!

"By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

Contact you about potential opportunities.

Delete personal data not required at this application stage.

To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Aloysius Tan Sheng Rong - R22110441

ScienTec Consulting Pte Ltd - 11C5781

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

Job Summary

Our prestigious client is seeking for a Network Engineer(s) to enhance and maintain the network performance service level to ensure the smooth business operations within the organization. You will be responsible to handle the incident response & investigation, working with vendors and the respective teams to efficiently resolve issues within the agreed Service Level Agreement (SLA).

Mandatory Skill-set

• Degree in Computer Science, Engineering, Electronics or Information Technology;
• At least 7 years of working experience in managing IT system network operations and support (24x7), service recovery, problem management, risk mitigation and impact assessment;
• Proven track record with over 7 years of hands-on experience in successfully implementing IT infrastructure projects for LAN and WAN environments;
• Proficient in installing and configuring a wide range of network technologies, including LAN, WAN,VoiP, WiFi, wireless controllers, access points, firewalls, security gateways, VPNs, 802.1x protocol, VLANs, and L2/3 switches;
• Skilled in using monitoring, network diagnostic, and network analytics tools to ensure optimal network performance and troubleshoot issues efficiently;
• Experience in project and vendor management;
• Excellent communication and interpersonal skills, with the ability to explain technical concepts to non-technical users;
• Strong problem-solving skills and the ability to work independently and collaboratively in a team environment.

Desired Skill-set

• Professional and technical certifications that include CCIE, CCNA, CCDP, CCNP, ITIL, PMP, CITPM, CISSP, AWS Certified Solutions Architect.

Responsibilities

• Lead and manage the network operations, incident handling, maintenance, compliance, and renewal of IT infrastructure systems (Wired/Wireless) to ensure all systems are working in good condition to maintain normal operations;
• Ensure proper project and change management to ensure delivered solutions meet technical, functional, performance and business requirements;
• Coordinate with vendors and act as a point of contact for mitigation measures and assist to resolve the issues and investigation for root cause;
• Collaborate with the IT teams to address vulnerabilities and respond to security incidents;
• Responsible to detect signs of abnormality and to report overall system health status to ensure recovery actions, correction actions and preventive measures are in place for every incident reported;
• Lead and manage 24/7 operations and conduct periodic audits to ensure that the network infrastructure complies with industry standards, regulations, and company policies;
• Maximizing network performance through ongoing monitoring and troubleshooting;
• Scheduling and coordinating network upgrades while investigating network faults;
• Provide regular reports to senior management on network performance, incident resolution, and compliance status.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Responsibilities

• Responsible for building and setting up new development tools and infrastructure utilizing knowledge in continuous integration, delivery, and deployment (CI/CD), Cloud technologies, Container Orchestration and Security.

• Build and test end-to-end CI/CD pipelines, ensuring that systems are safe against security threats.

Requirements

• Degree / Diploma in Programming or related studies

• At least 3-5 years of relevant working experiences

• Highly motivated and results-oriented Analyst with technical expertise in AWS cloud environments, specifically GCC AWS.

• Experienced in using Terraform for infrastructure automation, and skilled in developing reporting solutions using Elixir and MongoDB.

• Contributed to cloud migration projects, ensuring smooth transitions and optimized performance. Proficient in CI/CD practices with GitLab (Ship-Hats).

Top Mandatory skills

1. AWS

2. Mongo DB

3. Kubernetes

Skills which are good to have / optional

1. DevOps

2. Terraform

3. Communication

Licence no: 12C6060

- Provides technical and engineering insight and direction to support and improve usability, applicability and adoption of products, platforms and solutions to meet customer business needs.

- Diagnoses, troubleshoots and resolves complex technical issues on customer installations; deploys and trains customers on new products and/or implementations and capabilities.

- Reviews and analyzes feedback on product and solutions performance from customers and other application partners; works directly with Research and Development (R&D) to develop and implement technical roadmap, specifications and validation for improvements and enhancements.

- Partners with customer technical leaders and Sales to identify business challenges, develop effective technical solutions for new accounts and increase utilization and retention of products on current accounts.

Yow Jiewei Jacky
EA Personnel: R22111755
EA License: 12C6295

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

About Company:
Since its founding in 1894 as a cotton fabric wholesaler in Japan, Our Client, has grown into a global enterprise with more than a 120-year history. Our client, is actively engaging in various business fields including the trading of textiles, machinery, and construction materials, in addition to the manufacturing and sales of medicines, medical equipment, and energy saving products.

Job Description:
- Design & perform detailed designing for machine electrical control systems
- Write PLC program for automatic machine control & processes
- Collaborate & work together with the Design Team for design concept arising from new proposal & confirmed projects proposal
- Lead the in-house electrical staff/company’s appointed electrical vendors on machine control & electrical systems & operations of the projects
- Lead the assembly members & technicians during Machine set-up, Machine Assembly Process, Alignment, Testing & commissioning in the Company/customer site
- Spearhead meetings and review with the design team & the customers on control system requirements and specification
- Undertake robotics programming or programming as well as commissioning on the industrial robots, MIR and collaborative robotics systems
- Conduct 2D & 3D camera application evaluations
- Team up with cross-disciplinary teams of engineers & specialists focusing on smart factory technologies & projects
- Ideate and build robust data & digital technology driven solutions for advanced manufacturing/industrial processes
- Leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs
- Follow-up on projects development & report the project progress & development to department head timely
- Write & compile the machine instruction & operational manual on control system upon the projects completion
- Keep abreast to the latest Smart Factory technological breakthrough in the industry & related business arena
- Other ad hoc projects/duties assigned by the company

Job Requirements:
- Diploma/Degree in Computer Engineering, Electrical or Electronics Engineering, Automation or Control Engineering or related field
- Possess Control Programming working experience, preferably 3 to 5 years experience
- Preferably having Industrial PC (IPC) programming experiences
- Leadership experience is an advantage
- Good teamwork and ability to work independently
- Good communication skill
- Time management and ability to meet projects deadline

Compensation:
- Working location: West, Singapore
- Working hours: 8:30am - 6pm

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

About Our Client

• Logistics Freight Forwarding Solutions @ Kranji
• Normal Working Hours: Mon - Fri @ 8am - 5pm
• Basic + AWS + PB

Job Description

• Design and optimize packaging processes using Solidworks.
• Create technical drawings and packaging layouts compliant with ASTM standards.
• Improve production efficiency and reduce waste through process optimization.
• Collaborate with production, quality, and logistics teams to ensure smooth operations.
• Ensure packaging meets quality standards, including ASTM compliance, through testing and inspections.
• Troubleshoot process issues and provide technical support.

The Successful Applicant

• Min. NITEC/Diploma in Engineering or equivalent.
• With relevant experience or knowledge in packaging/ crating work preferred
• Understanding of ASTM international standards.
• Proficient use of Solidworks software.
• Able to manage multiple projects in a fast-paced environment with strong project management skills.

Reach out

Please submit your updated resume by using the APPLY NOW button

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to Kanry Search Singapore Pte Ltd’s PDPA and e2i’s PDPA.”

Kanry Search Singapore | 24C2261

Sarah Lau | R22110930

Our client is in is the automation industry, transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries! As they continue to grow, they are seeking a Lead Power Systems Engineer to join their team.

Key Responsibilities:

• Lead a team of electrical engineers focused on power systems (generation, distribution, control).
• Guide and support the team, fostering collaboration and innovation.
• Work with cross-functional teams to integrate electrical systems into product designs.
• Oversee testing and optimization of electrical components for reliability and performance.
• Select components and wiring based on cost, efficiency, and sustainability.
• Stay current on new technologies and trends to improve designs.
• Ensure compliance with industry standards and safety regulations.
• Manage supplier relationships to source quality components.
• Oversee the design process from concept to production, providing support during testing.
• Collaborate with leadership on project goals, timelines, and resources.
• Lead design reviews to improve product quality and energy efficiency.
• Drive continuous improvement in team processes and efficiency.

Requirements:

• Bachelors degree in Electrical Engineering or related field.
• 6+ years of experience in power systems and electrical engineering.
• Proven leadership and team management experience.
• Expertise in electrical design tools (e.g., E3.series, SOLIDWORKS Electrical, AutoCAD Electrical).
• Strong understanding of power electronics, circuit theory, and energy management.
• Experience in robotics, automotive, or commercial products.
• Familiarity with sustainability and emerging trends in power systems.
• Excellent communication and project management skills.

Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Attn: Woo Gu Ming (R24123795)
Cultivar Asia Pte Ltd (MOM EA License: 19C8782)

Responsibilities

• To report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• To assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• To prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• To supervise the execution of the construction works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract documents.
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• To liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist Contract department (QS) in verifying progress payments and claims from Contractors.
• To attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule.
• To establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Any other duties that may be assigned from time to time.

Requirements

• Degree in Civil Engineering or equivalent with 3 to 5 years of working experience in the construction industry.
• Good Time management and organization skills;
• Good interpersonal and communication skill;
• Able to multitask;
• Able to work under fast paced environment;
• Located at Changi Airport site office.

Job Description:

• End User Development (EUD) using Microsoft VBA (Access/Excel).
• Study user business requirements and develop the application to meet user needs.
• PC, server and network administration and maintenance.
• Provide support to business system and applications.
• Provide IT Helpdesk support to users.
• Collaborate with vendor during project implementation.
• To undertake any other work-related duties that may be assigned by management from time to time.

Requirements:

• Minimum diploma-holder, in a relevant field, from a recognised and reputable institution.
• Minimum of 2 year working experience in application development.
• Familiar with Software Development Life Cycle.
• Strong development skills using Microsoft VBA and willing to learn new programming language and technology such as RPA.
• Experience of developing applications for financial institution is preferable.
• Ability to work independently.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Your Role
We are looking for an experienced Project Engineer / Civil Engineer/Site Engineer to manage and site supervision works, planning, conducting the technical and management of construction projects. To ensure that all projects are delivered on-time & within budget.

What Will You Do

• Manage and site supervision works, planning, conducting the technical and management of construction projects
• To ensure that all projects are delivered on-time & within budget.
• To ensure work are executed in accordance with approved drawings
• Provide periodical site inspection and attend meetings
• Liaise with clients, consultants, and authorities on technical matters.
• Responsible for all construction site matters including safety and other compliance
• Other duties assign when require by manager

What Do We Want

• Min Degree in Civil/Structural Engineering or other relevant fields (Recognized by PE Board).
• Min 0-1 year of experience in project management in the public and private residential, government and commercial building projects.
• To solid technical knowledge related to structural, architectural or M&E works
• Well-versed in local code of practice, authorities regulations for submission.

What Will You Get In Return
You will be given exposure to a hold a key position in a growing organization with attractive rewards and a wide range of benefits. You will entitle a Gross salary up to S$4500+ attractive perks.

What You Need to do Now
Click "Apply" and please include the following information in your resume:

• Personal Particulars with recent photograph
• Education background
• Work experiences in point forms
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

Note:
Only shortlisted candidate will be notified via email for an interview invitation

Job Description

· Schedule & Program

· To supervise & coordinate the site work

· To co-ordinate and liaise with Maincon and Subcon

· To attend all the necessary meetings with Maincon/consultant

· To assist, prepare and update the monthly site progress report

· To update site progress claim

· To prepare, revise and update all the shop drawings, as-built drawings and O&M

· To prepare site safety & document submission (RA, MOS and etc)

· Carry out inspection with RTO/Consultant

· To update superior on the site matter or changes

· Assist in certification of Subcon progress claim

· Maintain good relationship with client

· Monitor and request for equipment and material delivery

· To lead team leader in project execution, planning and scheduling

· To resolve site technical issue related to coordination, installation, testing and commissioning

· Any adhoc duty assigned by superior

Requirements

· Diploma in engineering with minimum 3 years of ACMV/M&E working experience, OR

· Degree in relevant engineering and minimum 1 years of ACMV/M&E working experience

· Fresh Graduate are encouraged to apply

· Good oral and written communication skills

· Good interpersonal skills, planning, analytical and problem-solving skills

· Knowledge in ACMV/M&E design will be an advantage

· Proficiency in Autocad

· Excellent project management skills including the ability to manage timelines, budgets, and resources effectively

· Confidence and Assertiveness

· Willing to learn and accept new challenges

· 5.5 days work

Stone Supplier Company at Tampines Has Vacancy For:

Position: (QS) Quality Surveyor

Salary: $3300 - $3500

Working Hour: 9am - 6pm (Mon - Fri) & 9am - 1pm (Sat)

Rest Day: Sunday

Location: Tampines

✅ Manages And Prepares Costing

✅ Monitor Ongoing Projects And Ensure To Be Completed Within Budget And Schedule

✅ Relevant Certificates Provided Would Be Preferred

▶ Interested applicants, may send me your updated CV with a recent photo:

Key Responsibilities:

• Conduct regular quality checks on processes and claims to ensure adherence to company standards.
• Develop and implement quality assurance guidelines and best practices for operational procedures.
• Monitor and evaluate customer interactions and claims to ensure compliance with internal and regulatory standards.
• Identify areas for improvement and work collaboratively with teams to enhance quality and operational efficiency.
• Prepare and present reports on quality performance, highlighting trends and actionable insights.

Qualifications:

• Prior experience in quality assurance within the insurance industry is preferred.
• BCP and PGI Certs will be advantageous
• Strong analytical skills and attention to detail.
• Excellent communication skills and ability to work collaboratively across teams.

EA Personnel Name: Izz Bin Lokman
EA Personnel No: R24124828
EA License No: 05C3451

Our client a leading player in industrial packaging products and services. Due to business needs, they are now recruiting a Manufacturing Quality Technicianto be part of their Quality Management Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Manufacturing Quality Technician:

• Monitor and improve process flows to enhance efficiency.
• Conduct quality checks to ensure products meet set standards.
• Ensure only top-quality products are delivered to customers.

Requirements:

• Relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Temus was established by Temasek in partnership with UST, to provide digital transformation solutions for the private and public sectors as we aspire to be a strategic partner in realising the Singapore Government’s Smart Nation vision. We are headquartered in Singapore and have more than 400 employees across a wide range of disciplines in strategy, design, architecture, technology, data & AI.

Job Overview:

We are seeking an experienced and highly motivated Quality Assurance Lead to spearhead the Quality Assurance (QA) pillar within our Digital Transformation Office. The successful candidate will play a pivotal role in ensuring the quality, cybersecurity, and compliance of domain products align with the client's standards. This leadership position requires a strategic thinker with a strong background in QA methodologies, cybersecurity practices, and compliance frameworks.

Responsibilities:

1. Define and Develop Controls, Procedures, and Metrics:

• Develop and implement an overall QA strategy aligned with the client’s goals and objectives.
• Lead the definition and development of controls, procedures, and metrics for quality, security, and compliance during the development and sustainment phases. (in areas like DevOps, CICD Pipeline, Functional Testing, Security Vulnerability etc)
• Communicate and harmonize these controls, procedures, and metrics across projects/products delivery teams to ensure consistency and alignment with client standards.
• Identify areas for process improvement and implement best practices to enhance efficiency and quality.

2. Independent Quality Assessment:

• Conduct independent quality assessments on domain products, collaborating with project/product delivery teams to address findings and mitigate risks.
• Be accountable to the client's Governance Board for product acceptance and deployment release, including the clearance of vulnerability assessment reports.

3. Periodic Compliance Checks:

• Conduct independent periodic compliance checks on selected systems annually, post system go-live, based on applicable standards, policies, and directives.
• Identify risks and compliance issues, submit reports detailing findings and recommendations, and track the rectification progress by project/product teams until closure.

4. Continuous Improvement:

• Drive continuous improvement efforts to enhance IT quality, security, and compliance for domain product delivery.
• Identify opportunities for improvement and suggest recommendations, including the exploration of automation tools and methods to streamline processes.

5. Risk Management:

• Identify and assess potential risks to the quality of software products and develop mitigation strategies.
• Work proactively with key Project Members e.g. Project Manager and Test Manager to prevent and address quality issues throughout the development lifecycle.

Job Requirements/ Qualifications:

• Bachelor's or Master's degree in Computer Science, Information Technology, or a related field.
• Minimum 10 years of experience in project delivery role for IT/ Consulting domain
• Proven experience (min 5 years) in a leadership role within Quality Assurance, focusing on product quality, cybersecurity, and compliance.
• In-depth knowledge of QA methodologies, cybersecurity best practices, and compliance frameworks.
• Strong understanding of controls, procedures, and metrics used in software development and sustainment.
• Experience with vulnerability assessment and resolution processes.
• Excellent communication and collaboration skills to work effectively with cross-functional teams.
• Proven track record in driving continuous improvement initiatives.
• Relevant certifications (e.g., CISSP, CISM, ISTQB) will be a plus.
• Public Sector experience will be advantageous

By applying for this role, you have read and acknowledge the data privacy statement via this link - https://www.temus.com/job-applicant-data-protection/

Our client a leading player in industrial packaging products and services. Due to business needs, they are now recruiting a Manufacturing Quality Technicianto be part of their Quality Management Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Manufacturing Quality Technician:

• Monitor and improve process flows to enhance efficiency.
• Conduct quality checks to ensure products meet set standards.
• Ensure only top-quality products are delivered to customers.

Requirements:

• Relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Salary: up to $8000

Duration: 6 months contract

Working Days & Hours: Mon-Fri Office Hours

Location: Kranji

Job Description:

• Partner with the Subject Matter Expert, assist the validation team with gap analysis/risk assessment prior to qualification activities, and where gaps are identified, proposed mitigation plans.

• Participate in validation discrepancy investigations, assist in the review & approval of the discrepancy reports and support associated CAPA closures.

• Review and approve validation documents not limited to protocols and reports.

• Provide support with any validation queries and issues.

• Review and approve routine SOPs, FORMs and any relevant procedures including Manufacturing Batch Records

• Product / Raw Material Release skillset (Review and Release)

• Quality oversight for manufacturing

• GEMBA walk / GMP walk-through

• Revise, review and approval of procedures (SOPs, forms, Manufacturing Batch Records)

Job Requirements: Min Degree in Life Sciences or similar w min 5 yrs of relevant experience in GMP/Pharma

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)