Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Description

1. Perform research in the following areas:

a. Global performance analysis, and/or

b. Global structural response analysis

2. Assist in conducting physical model tests, field experiments and numerical simulations to support the development of integrated physical-numerical modelling and simulations.

3. Collaborate with industry partners, affiliated research institutes and other relevant stakeholders to contribute to grant proposals for research funding consistent with the strategic goals of TCOMS.

4. Any other duties as assigned by supervisor.

Job Requirements

· Bachelor's/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Naval Architecture, Applied Mathematics or other related disciplines.

· Preferably having relevant research/industry experience with competent knowledge in some of the following areas: Offshore engineering, marine engineering, hydrodynamics, naval architecture and ocean engineering.

· At least 5 years of experience

· Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Finite Element analysis tools such as SESAM, ABAQUS, Ansys

o Programming codes such as FORTRAN, Python, MATLAB, C++ or equivalent.

· Good interpersonal and communications skills.

· Ability to adapt and work effectively as members of a team.

· Good command of written and spoken language.

· Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry-partnered Ignition research project where you will be part of a collaborative team exploring innovative ways of characterizing the physical and rheological properties of liquid personal care products and understanding the impact of these properties in product design and process development.

Key Responsibilities

• In this role, you will perform shear and extensional rheological characterization of a large variety of liquid personal care products including lotions, topical oils, and more. We will explore innovative and emerging methods of rheological characterization and analyzing rheological data to extract material parameters to build a database of materials. Working with our industrial partner we will establish an understanding of rheological properties that are useful for product formulation and process design related to lab and larger scale extrusion/dispensing applications.More specific responsibilities include:
  • Participate in and manage the research project with Principal Investigator (PI), and the research team members to ensure all project deliverables are met.
  • Undertake development of rheological protocols and characterization of liquid personal care products
  • Formulate model materials with various additives to understand their impact on product rheology
  • Design, execute, and interpret experiments independently and with support from the PI.
  • Prepare and deliver written articles, reports, and presentations for industrial partners and external audiences.
  • Attend and present at regular group meetings to receive feedback on work done and future plans
  • Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
  • Coordinate procurement and liaison with vendors/suppliers.
  • Work independently, as well as within a team.

Job Requirements

• Have relevant competence in the areas of rheological characterization and analysis, wet lab work, material formulation
• Have a degree in pharmaceutical engineering, chemical engineering, mechanical engineering, food or materials science/engineering, or a related field. Possessing a Master’s degree will be advantageous.
• Knowledge of any of the following will be advantageous: material dispensing/extrusion processing, material science, textural and sensory analysis

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development.
• Proficient in communicating via technical writing and presentations.
• Possess strong analytical and critical thinking skills.
• Show strong initiative and take ownership of work.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Assist CAG research projects and activities, and support CAG Senior Research Fellows and Faculty Associates in their research projects
• Prepare background briefs, presentations, and track specific issues
• Conduct independent research, and write academic and policy research papers and reports
• Compile and manage research materials and products
• Provide editorial and management support to research projects, events, and publications
• Organise and support CAG events, including academic and policy conferences and workshops
• Undertake other administrative duties related to research projects such as managing correspondence and filing
• Support CAG public engagement including social media content management and website maintenance

Job Requirements

• A Master’s degree holder in a discipline within the social sciences and/or humanities
• Expertise or interests in any of the following:
  o China-India relations
  o Asian politics and international relations, including great power politics and Southeast Asian regional politics
  o Applicants with other areas of interests will also be considered if relevant to CAG research focus
• Strong analytical ability and strong self-motivation
• Able to work independently
• An ability to engage with research and policy communities in Asia and around the world
• A strong sense of collegiality
• Excellent spoken and written English
• Ability/experience with social media content management tools
• At least 2-3 years of experience in academic research

Application Procedure

Applicants should submit in electronic form (MS Word or PDF file) for the following below:

• Cover letter, with a brief statement of research expertise and its relevance to research interests as above
• Detailed curriculum vitae
• At least one writing sample (in English)
• Two references/recommendation letters
• Joining date: January 2025
• Application deadline: December 15, 2024

Only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

1. Conduct lab-based research and perform experiments.
2. Collaborate with colleagues both inside/outside the group.
3. Assist in daily lab management duties.
4. Present and report research results and publish scientific results in peer-reviewed journals in a timely manner.
5. Ensure compliance with environment, safety, health and quality program requirements from all levels (e.g. university, faculty of engineering and the department of MSE).
6. Translation and commercialization. Training will be provided

Job Requirements

A bachelor and a master degree in Chemical Engineering, Material Engineering or related field is required. The candidate should have 2-3 years of experiences in doing research.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Summary

Singapore Centre for Environmental Life Sciences Engineering (SCELSE) is seeking a dedicated and skilled Research Fellow to lead research on the ectomycorrhizal fungi and associated microbial communities in Dipterocarpaceae tree species across urban and forested landscapes in Singapore. This position plays a key role in advancing knowledge on plant-microbe interactions, contributing to conservation and ecological health of Dipterocarpaceae trees.

Duties and Responsibilities

• Lead fieldwork initiatives for the survey and collection of soils associated with the ectomycorrhizal fungi and microbiome of Dipterocarpaceae tree species across diverse environments in Singapore.
• Conduct health assessments of surveyed Dipterocarp trees, gathering data to compare markers of healthy and unhealthy specimens.
• Coordinate with the National Parks Board (NParks) for site access and to ensure accurate sampling locations.
• Perform assays to quantify soil properties and nutrient content in collaboration with team members.
• Conduct untargeted metabolomics on soil samples to identify microbial and metabolite profiles.
• Work closely with interdisciplinary teams to drive research objectives and achieve project outcomes.

Qualification

• PhD in Plant Ecology, Environmental Science, or a related field.
• Proven field experience in sample collection and ecosystem surveys.
• Strong collaboration skills and the ability to work effectively within a multidisciplinary team.
• Excellent written and verbal communication skills.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for Research Fellow in the Centre for Behavioural and Implementation Science Interventions (BISI), Yong Loo Lin School of Medicine. The centre aims to improve population health and well-being and healthcare delivery by accelerating evidence-based practice through the use of behavioural and implementation science. More information on the centre is available at https://medicine.nus.edu.sg/bisi/ . Appointments will be made on a 1-year contract basis in the first instance, with the possibility of extension.

Purpose of the post

The successful hire is expected to provide assistance to the BISI Faculty in i) delivering the research projects that the Centre’s research strategy has identified as key priorities, ii) contribute to the writing and applications for competitive grants, iii) leading/mentoring junior researchers within a collaborative research team, and iv) deliver some teaching in behavioural and implementation science in both undergraduate and post-graduate settings.

The role is primarily a research-orientated one, however the post-holder will be expected to contribute teaching in areas of their expertise within the Centre’s expanding teaching curriculum in behavioural and implementation sciences.

Main Duties and Responsibilities

This is a regular full-time position of which the contract is renewable, subject to performance.

The chosen candidate will:

• Work closely with the team leads, collaborators, cross-disciplinary research teams and support staff
• Design and undertake research and provide expertise across a variety of research-related activities

Research-Related

• Perform systematic reviews of available evidence
• Design, planning and execution of research projects with behavioural and implementation science components;
• Analysis and interpretation of research data (qualitative; quantitative or health economics);
• Writing of research reports, peer-reviewed publications and grant applications;
• Dissemination of research proposals and findings through presentations internally and externally at scientific meetings and conferences.

Education-Related

• Mentor junior research staff
• Deliver teaching in behavioural and implementation science in undergraduate and postgraduate settings.

Qualifications

The candidate should possess:

• A PhD in a relevant discipline

Research-Related

• Experience in undertaking or leading, as appropriate for career stage, independent research studies;
• Track record of publishing in peer-reviewed journals commensurate with career stage;
• Track record of publications/presentations in international or national scientific conferences.
• Experience in a variety of quantitative methods for study design, data management, analysis and reporting – including experience in epidemiology, biostatistics or health economics methods;
• Experience in research software (eg Stata, SPSS, nViVO, Treeage)
• Experience in contributing to research grant proposals will be advantageous

Education-Related

• Experience in delivering and facilitating courses, workshops and training;

Application

Remuneration will be commensurate with the candidate’s qualifications and experience. Informal enquiries are welcome and should be made to Ms Huang Weilin at [email protected].

Formal application: Please submit your application, indicating current/expected salary, supported by a detailed CV (including personal particulars, academic and employment history, complete list of publications/oral presentations and full contacts of three (3) referees.

We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Position Overview: The Academy for Healthy Longevity at the Yong Loo Lin School of Medicine, National University of Singapore, seeks a dynamic and versatile Research Associate to serve as the Executive Support and Operations Lead. This pivotal role will provide high-level support to the Principal Investigator (PI) and executive staff, while gaining broad exposure to various aspects of geroscience and geromedicine research. The successful candidate will play a crucial role in advancing the Academy's mission to position Singapore as a global leader in healthy aging research.

This one-year appointment offers an exceptional opportunity for a motivated individual to fast-track their research career by engaging in diverse projects and gaining comprehensive insights into the field of healthy longevity.

Main Duties and Responsibilities

## Executive Support

- Serve as the primary liaison between the PI, executive staff, and internal/external stakeholders

- Manage the PI's schedule, including coordinating meetings, travel arrangements, and prioritizing commitments

- Prepare and edit high-level correspondence, reports, and presentations for the PI and executive team

- Assist in the development and implementation of strategic initiatives aligned with the Academy's goals

## Research Coordination

- Collaborate with research teams to track project progress and ensure timely completion of deliverables

- Assist in the preparation of grant proposals, ethics applications, and regulatory documentation

- Coordinate with internal departments and external partners to facilitate research collaborations

- Support the dissemination of research findings through publications and conference presentations

Main Duties and Responsibilities

## Operational Management

- Support day-to-day operations of the Academy, ensuring efficiency and effectiveness

- Support the management of budgets and financial planning for research projects and operational activities

- Coordinate facility and equipment management to support research activities

## Team Leadership and Development

- Assist in the recruitment, onboarding, and training of new staff and students

- Identify training needs and facilitate professional development opportunities for team members

- Foster a collaborative and innovative work environment that promotes excellence in research

## Stakeholder Engagement

- Represent the Academy at conferences, workshops, and public forums

- Assist in organizing and executing outreach events and initiatives to promote the Academy's work

- Build and maintain relationships with academic partners, industry collaborators, and government agencies

Qualifications

- Master's degree in Life Sciences, Medicine, Public Health, or a related field

- Minimum of 3 years of experience in a research or healthcare setting, with demonstrated project management skills

- Strong understanding of clinical research protocols, regulatory requirements, and ethical standards

- Excellent organizational and problem-solving skills, with the ability to manage multiple projects simultaneously

- Exceptional written and verbal communication skills, with the ability to interact effectively with diverse stakeholders

- Proficiency in data analysis, research methodologies, and relevant software applications

- Demonstrated leadership potential and the ability to work both independently and collaboratively

- Keen interest in geroscience, geromedicine, and healthy aging research

- Adaptability and willingness to engage in a wide range of tasks and research areas

This position offers an unparalleled opportunity to gain comprehensive exposure to cutting-edge research in healthy longevity while developing crucial leadership and operational skills. The successful candidate will play a vital role in advancing the Academy's mission and positioning themselves for rapid career growth in the dynamic field of geroscience.

DesCartes Program (work package 9) is looking for research assistant in UI/UX design and library development. The objective is to develop a user interface and implement libraries as required for the DesCartes Builder, a novel open-source framework for designing, validating, and integrating innovative hybrid AI models and methodologies.

DESCARTES PROGRAM

The DesCartes programme is developing a hybrid AI, combining Learning, Knowledge and Reasoning, which has good properties (need for less resources and data, security, robustness, fairness, respect for privacy, ethics), and demonstrated on industrial applications of the smart city (digital energy, monitoring of structures, air traffic control).

The program brings together 80 permanent researchers (half from France, half from Singapore), with the support of large industrial groups (Thales SG, EDF SG, ESI group, CETIM Matcor, ARIA etc.).

The research will take place mainly in Singapore, at the premises of CNRS@CREATE, with a competitive salary and generous funding for missions.

Read more about the DesCartes program here.

DESCRIPTION

To facilitate the development of the next generation of urban systems, the DesCartes Program is currently developing a software framework that brings together AI components, physics models and data, modelization and control aspects. This framework, the DesCartes Builder, shall play an integral role in developing robust hybrid AI pipelines, as required for the design and deployment of digital twins of urban applications. As a research assistant, you will play a key role in developing the Builder:

• Craft a user-friendly interface:Design an intuitive interface that allows users to define, manipulate and execute the hybrid AI pipelines with flexibility and ease.
• Develop reusable components: Create robust and reusable libraries that will form the foundation of the DesCartes Builder framework.

EXPERIENCE & QUALIFICATIONS

• Minimum Requirements Bachelor or Master in computer science or engineering.
  A first relevant professional experience (master, internships…).
• Required Skills: Rigor, ability to work with autonomy and with a results-oriented mindset.
  Good interpersonal and communication skill; teamwork.
  Knowledge of Python and basics of machine learning
  Basics of UI/UX design
• Preferred Skills: Strong software engineering skills and development methodologies
  Experience with UI/UX design and UI libraries such as Qt,
  Knowledge of C++ & software optimization,
  Experience with Linux development environment (bash, make, etc.),
  Familiarity with machine learning and deep learning libraries (PyTorch, scikit-learn, etc.).
• Keywords: software engineering
  user interface
  library development
  human computer interface
  machine learning
  artificial intelligence

FURTHER INFORMATION & CONTACT

Gross Monthly Salary Range (SGD): 5,500 to 8,000 (depending on suitability and experience).

Workplace address: CREATE Campus, CREATE Tower, 1 Create Way #08-01 Singapore 138602.

Interested applicants, please send your application to:

• Blaise Genest (Prof): [email protected]
• Eduardo de Conto: [email protected]
• DesCartes – Hiring: [email protected]

Please send your application as a single PDF file including CV, cover letter and name/contact (including email addresses) of two referees.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Tropical Marine Science Institute, National University of Singapore invites applications for the position of Research Assistant for the research project Marine Environment Sensing Network (MESN; see https://ombak.mesn.sg/).

The MESN project aims to establish operational marine monitoring capabilities for research and monitoring of climate change and other emerging threats to Singapore’s marine environment. MESN also aims to foster development of marine technologies and support marine science R&D efforts.

Key responsibilities:
• Maintaining the operations of a suite of environmental sensors on the MESN buoys
• Curate environmental data from the MESN buoys and other marine monitoring efforts
• Plan and conduct fieldwork to retrieve/deploy sensors and maintain the MESN buoys
• Assist in the curating of web content on the MESN data platform and website
• Work closely with multi-disciplinary team of scientists and engineers
• Perform relevant desk scientific research to a specific brief where required
• Assist with data collection, data analysis, and preparing research results for publication in peer-reviewed scientific journals
• Assist in various administrative duties as part of project management

Requirements

• Bachelor’s degree or higher (preferably with environmental science or engineering background)
• Familiar with water quality measurements and marine environment data
• Must be physically fit and able to work in the field and on boats
• Should be able to multitask and manage tight timelines
• Independent and self-motivated, and organised with attention to detail
• Proficiency in English, both spoken and written, that are essential for communication of findings in scientific and other media
• Team player able to work closely with a multidisciplinary project team including engineers and IT specialists
• Preferably able to SCUBA dive, with PADI Rescue level (or equivalent) and above certification
• Preferably familiar with Singapore’s marine environment

TMSI is committed to an employee-orientated, high-performance culture that emphasises empowerment, quality, and continuous improvement.

We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Research Associate - Genomic safe harbour targeted engineering of cells for gene and cell therapy

Location: Cardiovascular-Metabolic Disease TRP, NUS YLL School of Medicine

Description:

We are looking for a Research Associate to drive the wet lab research activities for the duration of the project.

Responsibilities:

• Clone and amplify complex constructs necessary for engineering of mammalian cells
• Maintain cultures of mammalian cells to a high standard and conduct engineering experiments working closely with the project leads
• Compile and organise experimental data, including cell culture records, characterization results, and cell line inventory information
• Conduct daily wet-lab experiments e.g. nucleic acid extraction and quantification
• Assist the team to ensure a safe and efficient working environment
• Ensure project deliverables are met in a timely manner and to the highest standard

Qualifications

• Master’s Degree in Biology, Biochemistry, Molecular Biology, or related discipline.
• Minimum 3 years of working experience in a research laboratory
• Experience with mammalian cell culture and genome engineering
• Extensive knowledge of molecular cloning techniques
• Good organizational skills and ability to multitask
• Able to work independently and as part of a team
• Experience in working with lentiviral vectors is highly desirable
• Good communication (verbal and written)

This position offers an exciting opportunity to contribute to groundbreaking research in genome engineering for gene and cell therapy, with potential for career development and growth within our dynamic research environment.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Position Overview:

We are seeking a highly motivated Embedded System Engineer to join our team as a Research Engineer. The successful candidate will be responsible for selecting, programming, testing micro-controllers, and building corresponding circuitry and PCB for our cutting-edge research projects. This role offers an exciting opportunity to contribute to groundbreaking research in flexible electronics.

Key Responsibilities:

• Program micro-controller for realizing target functions.
• Design circuitry and PCB for corresponding micro-controller.
• Help with requirement analyse and micro-controller chip selection.
• Document design processes, results, and findings for academic publication.
• Stay updated on emerging trends and technologies in flexible electronics and related fields.

Qualifications

Qualifications:

• Master C/C++, have proficient embedded development and MCU development capabilities, and good programming habits.
• Familiar with communication ports, including UART, SPI, IIC and GPIO.
• Able to read hardware schematics, capable for driver writing and optimization, and familiar with Renesas, Nordic and STM32’s commonly used chips;
• Familiar with BLE working principle and commonly used BLE chips.
• Familiar with micro-controller developing tools (e.g. Keil, IAR)
• Experience with PCB design and proficiency in PCB design tools (e.g. Altium Designer)
• Bachelor's or Master's degree in Electrical and Computer Engineering, Electronics Engineering, Mechatronic Engineering, automation, or related field.
• Solid digital and analogue circuit knowledge foundation.
• Excellent problem-solving skills and attention to detail.
• Effective communication and collaboration abilities.

Preferred Qualifications:

• Expertise in MATLAB or Python for upper computer software development.
• Familiarity with biomedical signal processing or wearable electronics.
• Prior research experience in an academic or industrial setting.
• Additional expertise in wireless electronics design

Benefits:

• Competitive salary based on qualifications and experience.
• Opportunities for professional development and growth.
• Collaborative and innovative work environment.
• Access to state-of-the-art research facilities and resources.
• Potential for authorship on research publications, patents and presentations.

JOB DESCRIPTION

• Responsibilities: mouse colony management, genotyping, mouse surgery, immunostaining, tissue sectioning and staining, and other technical support requested by lab members
• Provide technical support for research

JOB REQUIREMENT

• Bachelor in Biological Science and Life Science disciplines or equivalent
• Experience with animal work will be valued
• Excellent organizational and interpersonal skills
• Highly motivated, passion for science, committed to laboratory work and able to work flexible hours
• Ability to multitask, work independently and also as part of a team
  Excellent communication (verbal and written) and presentation skills

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Coastal Protection and Flood Resilience Institute (CFI) Singapore is actively seeking a Research Engineer to contribute to a groundbreaking research project. This research explores the efficacy of integrated nature-based solutions in sediment erosional control and coastal protection. The goal is to develop innovative, physically based models that quantify the protective benefits a vegetation meadow can offer to shorelines.

The Research Engineer will participate in experimental research, with a specific focus on studying sediment flux in hybrid solutions to coastal protection. He/she will lead and execute flume experiments, data analysis and field sampling as well as specific tasks which includes planning and conducting experiments, running laboratory analyses, collection and analysis of data, and performing basic administrative duties.

He/she will work need to work with Assistant Professor Gary Lei from Civil and Environmental Engineering and Dr. Ow Yan Xiang from the Tropical Marine Science Institute (TMSI) at NUS. Ideally, we are interested in candidates with prior experience with laboratory experiments.

Job Requirements

• Possess a bachelor’s degree in environmental engineering /Environmental Science/ Mechanical Engineering, or a closely-related field.
• Priority will be given to applicants who have prior research experience in coastal engineering, aquatic plants science, eco-hydraulics, and/or environmental fluid mechanics.
• Strong verbal and written communication skills.
• Proficient with Microsoft Suite and R, or other equivalent analytic software.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Applications are invited for the following full-time position in the Saw Swee Hock School of Public Health:

A research fellow position is available in the Saw Swee Hock School of Public Health to support the Principal Investigators in research projects in the areas of Environmental and Cancer Epidemiology.

Major duties and responsibility of the position include but are not limited to:
• Data collection and management
• Data analysis using software such as R, Stata or SAS.
• Preparation of reports, presentations, manuscripts.
• Writing grant proposals
• Provide mentorship to graduate students and research assistants

The candidate must be an independent, highly motivated, and mature worker who is well-organized and demonstrates a growth mindset. Strong written and verbal communication skills are required, along with a record of relevant publications in peer-reviewed journals. He/She must have strong interpersonal skills and the ability to work effectively with colleagues to achieve team goals. Excellent proficiency in the following areas is preferred:

1. Microsoft Office Applications, particularly MS Word, Excel, Powerpoint
2. Experience in R, Python

The successful applicant is expected to possess at least a PhD Degree in Epidemiology, Public Health, Environmental Health, Biological Sciences, Biostatistics, Data Science, preferably with relevant experience. Prior experience with machine learning is a plus.

Recruitment is open immediately and will continue until the position is filled. Applicants should send a brief statement of interest, CV, three named references, and other supporting documents during the application. In your statement of interest, please highlight your relevant experience and interest in environmental and cancer epidemiology research.

We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

About the Centre for Research in Health Systems Performance (CRiHSP)

Optimizing the performance of health systems is essential to ensuring the wellbeing and longevity of populations worldwide. Singapore is particularly well placed to lead research in this field as its health system has been consistently ranked as one of the best in the world based in independent evaluation with the Global Burden of Disease data. The new Centre for Research in Health Systems Performance (CRiHSP) aims to advance research in this area within the Yong Loo Lin School of Medicine of the National University of Singapore (NUS) as the leading centre for research in health systems in Asia with the following core functions:

1. Research: empirical and methodological research and evidence synthesis on health systems performance with a particular focus on Value Based Healthcare.
2. Health policy intelligence: health policy impact analysis aimed at policy makers, service providers, researchers, and the wider public.
3. Capacity building: formal postgraduate programme (from certificates to PhD), fellowships, mentoring, on-the- job and ad hoc training
4. Contributing to improving NUHS performance: expert advice on the development, implementation, and evaluation of flagship initiatives (including Healthier SG) aimed at making step changes in NUHS performance, and programme evaluation

The multidisciplinary team of researchers in health systems (health services and policy researchers, data scientists, social scientists, and others), and administrators working in CRiHSP will provide an exciting and dynamic place in which people of diverse backgrounds collaborate towards the common goal of achieving excellence in Health Systems Research. The team will further benefit from a significant expansion in related fields and collaborations with the Department of family Medicine at the National University Health System (NUHS), the new Centre for Sustainable Medicine (CoSM) and the Centre for Behavioural and Implementation Sciences Interventions (BISI) at the School of Medicine and the Saw Swee Hock School of Public Health.

Duties and Responsibilities

The Research Associate will have the following duties:

• Contribution to the management of research activities including grant and IRB/DSRB applications, budgeting, planning and monitoring project timelines and generally support project management and coordination and liasing with internal and external stakeholders
• Conduct literature reviews, including collation and synthesis of the literature
• Support the design and interpretation of quantitative surveys and qualitative interviews and focus groups and collected data
• Contribute to and lead (where appropriate) protocol, manuscript and report timely writing, editing and submission.
• Present work for feedback and dissemination at workshops or conferences locally and/or internationally

The post holder will be expected to be flexible in their role as the CRiHSP´s capacity evolves.

NUS offers highly competitive remuneration packages. The successful applicant will be offered an annual salary plus benefits commensurate with his or her qualifications, experience and expertise and may have access to travel support to disseminate research outcomes at international academic conferences.

The position is full-time for 1 year in the first instance, depending on project commitments and candidate’s career objectives.

Qualifications

Applicants will be evaluated based on the following selection criteria:

Qualifications

• Masters in Life Sciences, Health & Social Sciences

Experience

• Experience in planning, managing and implementing healthcare-related research projects using qualitative and/or quantitative data, from conception to completion, in a University setting (essential)
• Track record of publishing in international peer-reviewed journals (desirable)
• Researchers with existing research activities related to Value Based Health Care, patient reported outcomes or patient reported experiences of care are particularly encouraged to apply

Qualifications

Skills and Personal Attributes:

• Strong communication skills in English, both written and spoken (essential)
• Ability to work independently and as part of a multidisciplinary team (essential)
• Highly developed problem-solving skills and adept at managing complex problems (essential)
• Outcome-orientation with excellent organizational and project management skills, and attention to detail (essential)
• Ability to work with culturally diverse populations (essential)

Interested candidates should submit a detailed CV (personal particulars, academic and employment history, full list of publications, contacts details of three (3) referees) and cover letter outlining their motivation and suitability for the project addressing each of the criteria outlined above. Only shortlisted candidates will be notified. Applications will be considered on a rolling basis until a suitable candidate is found.

The application should include a CV and a cover letter that describes the applicant’s specific interest in joining the team. Only shortlisted candidates will be contacted.

Informal enquiries can be made to Prof Jose M Valderas at [email protected].

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

1. Policy implementation: Review and update policy on research security and collaborate with research units to implement related procedures and protocols.
2. Risk Assessment: Conduct regular risk assessments of research projects and facilities to identify potential security vulnerabilities and develop mitigation strategies through review of research agreements and related documents.
3. Training and Awareness: Develop awareness/training program for faculty, staff, and students on research security best practices, compliance requirements, and incident reporting procedures.
4. Point of Contact: Serve as the primary point of contact for internal and external stakeholders for research security matters. Work closely with various departments, including IT, compliance, legal, and research units to promote a culture of security and compliance in research activities.
5. Monitoring and Reporting: Monitor compliance with research security policy, perform related analysis and prepare reports for senior management on related activities. Support scheduled compliance audit/inspection on research security readiness and mitigation measures compliance and recommend improvements and follow up actions.

Qualifications

• Recognised degree in science or engineering discipline preferred;
• At least 5 years’ working experience in research management/administration or similar roles in compliance;
• Experience in research related functions in higher education sector, or research contracts management will be an advantage;
• Knowledge or experience in reviewing and developing policies and procedures;
• Excellent communication, analytical, and organizational skills and ability to work collaboratively in a diverse environment; strong problem-solving capabilities;
• Meticulous, independent and organised individual with the ability to maintain confidentiality and discretion as may be necessary in the job function.

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

JOB DESCRIPTION

NGTC (National GaN Technology Centre) in IME is looking for a talent to join its Technology Team for R&D developments. The qualified candidate has opportunities to participate in technical tasks related to RF GaN foundry for the applications up to 140 GHz. This includes the following area:

• Perform experiments to analyse and determine the root cause of failure in GaN devices (e.g. Transistors, Capacitors, Inductors, Resistors, and Diode) and circuits.
• Join the cross-functional teams on appropriate FMEA (Failure Mode Effects & Analysis) techniques to establish an understanding of the failure mechanisms of the devices.
• Drives device reliability/qualification activities, and data correlation studies.
• Manage large & disparate data sets and distil information into concise presentations with possible recommendations as quick feedback to the engineering team.
• Develop new FMEA techniques to improve detection capability, productivity or process optimization.

JOB REQUIREMENT

• PhD degree in Electrical Engineering (EE), Materials Science or Physics, MS degree in EE with 5+ years or BS degree with 7+ years of relevant working experiences.
• > three-year of FMEA experience in step-by-step approach for identifying all possible failures in the semiconductor industry.
• FMEA experience in Wide-Bandgap (WBG) devices (GaAs, GaN) is plus.
• Good knowledge of WBG device physics and its fabrication is a big plus.
• In-Depth understanding of FMEA techniques (e.g. delaying of devices/chips by wet etching or plasma etching and its data analysis) with good hands-on experience in using different analytical techniques (e.g. SIMS, XPS, AES, SEM, FIB-SEM, TEM, AFM, etc.)
• Understanding of semiconductor device qualification standard such as JEDEC.
• Excellent report writing and presentation skills, able to robustly defend data analysis and conclusions where necessary.

OTHER ESSENTIAL ATTRIBUTES

• Good team-player personality, able to pro-actively engage with other groups
• Self-motivated, energetic, able to delivery in time