Responsibilities:

• Provide administrative and operational support in the centre day-to-day and during center events
• Conduct daily walkabout to ensure meeting rooms, office areas and pantries are in good order and cleanliness address
• Lookout for 5S, HSE, any defects or improvements to be done
• Track, maintain and order office supplies and their inventory
• Assist in access card application and artwork
• Assist in IT asset management and onboard/offboarding process
• Assist in liaising and sourcing of vendor for quotation, office equipment and services
• Assist in ensuring all term contracts are renewed timely and review all term contract performance. Initiate new term when applicable
• Drive Continuous Improvement for the administrative support
• Required to perform any centre centric duties to ensure the smooth operations and research work in the centre
• Conduct internal training and briefing when needed
• Provide backfill for the receptionist and its duties during office hours
• Provide general support to visitors when needed
• Assist in statutory audit and internal audit

Job requirements

• Minimally Nitec in related field
• Minimum 3 years of relevant experience in administrative / operational support
• Willing to be scheduled to occasionally work off office hours in support of operations
• Competency in Microsoft Office
• A self-driven and meticulous individual who is keen to pick up new knowledge and technology

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

For Regionalisation Programme:

• Identify and establish international partnerships with government bodies, industry players, and multilateral organizations by leading negotiations for agreements, MOUs, and collaborative projects, aligned with A*STAR, ARTC's regionalisation strategy.
• Conduct international market analysis to identify global trends, partnership opportunities, and emerging markets relevant.
• Manage international projects and partnership initiatives from inception to completion, ensuring alignment with A*STAR, ARTC's goals

For Start-ups Programme:

• Execute successful delivery of startup programmes, overseeing outreach, publicity, budget management, and vendor coordination.
• Deepen current relationships with public agencies such as ESG, IMDA, EDB, and various A*STAR Research Institutes to enhance collaboration opportunities.
• Manage relationships between startups and industry members to drive initiatives that enhance the overall performance of the consortium.

For Assigned Industry Members Customer Care:

• Provide dedicated support to nurture strong business relationships with assigned ARTC industry members, aligning strategic business goals, and achieving ARTC's revenue and project targets.
• Ensure timely and comprehensive reporting on business development activities with assigned members.
• Support in the analysing of market data, sector developments, and members' activities to stay updated on evolving market requirements.
• Ensure strict adherence to all Corporate Policies & Procedures related to Billings & Credit Control, HR, Operations, and Project Management.

Others:

• Support logistics matters related to ARTC visits with members/non members

Job requirements:

• Bachelor's Degree in Business Administration or an Engineering-related field.
• Minimum of 5 years of working experience in B2B business development and enterprise account management.
• Proven experience as a Business Accounts Manager or in a similar role within a consortium or collaborative business environment.
• Prior experience in the Start-up Industry and/or International partnership roles would be a bonus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a highly motivated and skilled Development Engineer specializing in ROS 2 to join our dynamic team. The role focuses on developing robotic solutions using ROS 2 and Robotics Middleware Framework (RMF) to drive the adoption of cutting-edge robotics technologies in industrial applications. The ideal candidate will play a pivotal role in bridging research innovations with real-world deployment, contributing to the full software development lifecycle of robotics projects while ensuring seamless integration with industrial systems.

Roles and Responsibilities

1. Software Development:

· Develop, test, and maintain robotics software solutions using ROS 2 and RMF.

· Write clean, efficient, and modular code in C++ and Python.

2. System Integration:

· Design and implement systems for deploying robotic solutions in industrial settings.

· Integrate robotic hardware, sensors, and actuators with ROS 2-based software solutions.

3. Project Execution:

· Plan and execute technical projects, ensuring timely delivery of milestones.

· Collaborate with cross-functional teams to translate research outcomes into deployable solutions.

4. Software Development Lifecycle:

· Contribute to all phases of the software development lifecycle (SDLC), including requirement gathering, design, implementation, testing, and deployment.

· Use version control systems (e.g., Git) effectively to manage and track code changes.

5. Systems Engineering and Technical Planning:

· Conduct systems engineering activities such as requirement analysis, system design, and validation planning.

· Translating business requirements into system requirements and validation methodologies in project planning and proposals

· Create technical documentation, including design documents, user manuals, and test plans.

6. Continuous Improvement:

· Stay updated with advancements in ROS 2, RMF, and robotics technologies.

· Identify opportunities to enhance performance, reliability, and usability of solutions.

Job Requirements

· Qualification & field of study: Bachelor's degree or higher in Robotics, Computer Science, Electrical/Mechanical Engineering, or related fields.

· Min. years of experience: 5 years

· Proficiency in C++ and Python programming.

· Experience in developing robotics applications using ROS 2

· Familiarity with Git for version control and collaborative development.

· Knowledge of the Robotics Middleware Framework (RMF) and its ecosystem.

· Familiarity with the software development lifecycle and best practices in software engineering.

· Ability to execute technical project planning and manage deliverables.

· Experience in systems engineering, including system design, requirements definition, and testing methodologies.

· Strong problem-solving skills and a proactive mindset.

· Effective communication and teamwork abilities.

· Adaptability to dynamic project requirements and timelines.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The S&A PMO process governance & automation lead is responsible for leading & overseeing day to day PMO process governance operations, which also include identifying & launching automation improvement to the process workflows to improve productivity and efficiency of ARTC Project Life Cycle Management (PLCM) Process.

Leading a team of 3-4 project coordinators & working across functions, the successful candidate responsibilities are to:

• Act as the main liaison officer to PMO director and S&A senior management as well as responsible for matters related to the organisations" Project Management System, PLCM processes, PMO financial & manpower untilisation
• Generate and analyse monthly financial data for management review
• Provide training and guidance for users using the project management system. Chair "Clinics" to address queries and support PLCM processes.
• Billing and track all project invoices
• Track, generate and analyse project manpower utilisation rate for management reviews.
• Assist PMO director in preparing project/programme data, presentation decks, communication slides and other project or programme related documents.
• Responsible for project or programme audit. leasing with project managers, principal investigator and colleagues from HQ.
• Collate and compile project management dashboards for reporting and management reviews
• Review and revise guidelines to improve existing processes pertaining to PLCM cesses. Be responsible for implementing automated process for PLCM workflows.

Requirements:

• More than 7 years of experience as project or programme controller, working in Project Management Office or related department
• Diploma or Degree in Business or engineering related courses.
• Demonstrate experience and capabilities in managing and communicating with crossfunctional stakeholders
• Experience of leading a small team to deliver excellence in PMO process governance.
• Demonstrate flexibility and agility to the change management process. Willing to embrace new ideas and change in a fast pace environment
• Skill in communicating with senior stakeholders both internally and externally

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The School of Mechanical & Aerospace Engineering (MAE) invites applications for the position of Research Fellow. The Research Fellow will be working on high-resolution imaging, bioimaging and metrology projects at the centre.

Key Responsibilities:

• Expected to work with the PI and other team members for doing R & D and take key role for the development of the systems for bioimaging and metrology
• Conduct and coordinate research within NTU and collaborating partners in line with its research strategy under the supervision of the PIs and collaborators
• Publish research outcomes in journals of international standing; Attend and present research findings and papers at academic meetings, and contribute to the external visibility of the centre.
• Draft research reports for PIs and undertake specific roles and management functions as may be reasonably required by the PIs.

Job Requirements:

• PhD in Optical Engineering, Biomedical Engineering, Mechanical Engineering, Precision Engineering, Electronics Engineering, Physics or a similar discipline with optics and instrumentation background
• Previous experience in high-resolution imaging, bioimaging, optical measurements, metrology, spectroscopy, hyperspectral imaging (HSI), and machine vision are desirable
• Expertise in handling and maintenance of high power CW and pulsed laser systems, spectrometers, high-resolution cameras, and delicate optical components are desirable
• Possess good programming, optical instrumentation, automation and image processing skills (e.g. C++, LabVIEW, Zemax, OSLO, TracePro, MATLAB, Python, ImageJ)
• Proven publication track record would be an advantage

We regret that only shortlisted candidates will be notified.

The CAP Group from Nanyang Technological University, Singapore, is seeking 1 motivated research fellow in the topic of “Digital Twin for Advanced Battery Analytics”.

Key Responsibilities:

• Lead research projects and cross-functional teams, including research fellows, engineers and other stakeholders;
• Supervise junior graduate students;
• Write technical reports, including papers, patents and technical disclosures;
• Work closely with team members/engineers and assist in developing new features;
• Ensure responsiveness of applications;
• Support expansion of research output through increased paper publication;
• Diagnose the issue and resolving it on demand.

Job Requirements:

• PhD Degree in Electrical Engineering, Information System, Computer Science, Computer Engineering or a related discipline;
• At least 5 years’ work experience in relevant areas, industrial leadership experience highly preferred;
• Proven ability to translate theoretical insights into practical solutions;
• Proficiency in Python and relevant packages, like NumPy, Pandas, PyTorch or Tensorflow;
• Excellent verbal communication skills and good problem solving skills;
• Strong attention to detail;
• Fluency in both spoken and written English - for research purposes

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

• Immediate positions!
• Good working environment
• Dynamic, energetic and outspoken personality
• 5 days work week

Job Responsibilities:

• Prepare lessons and worksheets
• Assessment of students' work
• Contribution to curriculum development

Job Requirements:

• To teach Sec Math and Science
• Preferably with at least 1-2 years of teaching experience
• Dynamic, energetic and outspoken personality
• Passionate about teaching and are constantly able to see the best in a child
• Familiar with Singapore curriculum
• Able to work on weekends

Successful candidates will be assigned to different job role depending on education level and experience.

Attractive remuneration package will be offered to the successful candidates.

The School of Materials Science and Engineering (MSE) provides a vibrant and nurturing environment for staff and students to carry out inter-disciplinary research in key areas such as Computational Materials Science, Characterisation Materials Science, Defence Composite Materials, Functional Composite Materials, Energy, Nanomaterials, Low Dimensional Materials, Biomaterials Materials, Biological Materials, Bioinspired Materials and Sustainable Materials.

We are looking for a highly motivated candidate to join us as a research fellow to facilitate the research program in the development of next generation steels funded by Singapore National Research Foundation led by Nanyang Assistant Professor Yi-sheng (Eason) Chen.

Key Responsibilities:

• Support the delivery of project goals
• Conduct high-quality research and disseminate outcomes in peer-reviewed journals and academic conferences
• Participate in supervising undergraduate and postgraduate researchers
• Collaborate with local/overseas research groups
• Establish one or more independent research programmes under the guidance of PI and other senior mentors
• Develop competitive funding proposals in collaboration with PI and other senior colleagues
• Engage in teaching undergraduate and graduate courses and contribute to curriculum development and pedagogical innovation
• Contribute to the development of international and local research communities
• Support the operation of PI's research group, including recuitment and external engagement
• Engage in developing and mainting a safe and inclusive work environment

Job Requirements:

• PhD in Materials Science or related fields
• Excellent proven skills in the fields of physical metallurgy and materials characterization
• Excellent communication skills and the ability to transmit research results into published research outcomes.
• Knowledge and experience in one or more of the following techniques: transmission electron microscopy (TEM), electron backscatter diffraction (EBSD), transmission Kikuchi diffraction (TKD), atom probe tomography, and associated sample preparation techniques including focused ion beam (FIB).
• Ability to work independently and to communicate effectively with team members
• Ability to work effectively under pressure to meet research deadlines
• Ability to work collaboratively with academic and industry partners
• Sound working knowledge and acute awareness of safety regulations and operating procedures within the laboratory environment.

We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Research Engineer/ Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges.

We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will work closely with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

• Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.
• Implement MLOps best practices to automate model training, deployment, and monitoring processes.
• Implement and optimize machine learning algorithms and deep learning architectures.
• Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.
• Optimize AI pipelines for scalability, reliability, and performance.
• Conduct performance analysis and optimization to improve model efficiency and accuracy.
• Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

• Bachelor or Master Degree in Computer Science/Engineering or relevant disciplines
• Must have a minimum of 8 years of experience as a Software Developer/Engineer
• Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerisation Technologies
• Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular
• A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)
• Can do attitude and happy to interface with multiple stakeholders
• Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail
• Excellent verbal and written communication skills
• Hands-on experience with machine learning frameworks/libraries
• Understanding of machine learning algorithms and techniques
• Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

ABOUT THE ROLE

We are seeking a highly motivated Research or Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. If you are independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges, this is the role for you.

JOB DESCRIPTION

• Develop, test, and maintain enterprise planning systems and applications.
• Analyze complex problems related to resource planning and scheduling, identifying potential solutions, and implementing the most effective one.
• Collaborate with other developers and stakeholders to deliver high-quality software products.
• Deploy software to production environments and provide ongoing maintenance and support to customers.
• Take responsibility for documenting code with technical specifications, user manuals, and other documentation to facilitate understanding and maintenance by other team members.
• Identify and address bottlenecks, inefficiencies, and scalability issues to ensure optimal performance of the software system.

JOB REQUIREMENT

• Bachelor's or Master's Degree in Computer Science or Engineering or relevant disciplines.
• Minimum of 5 years of working experience as a Software Developer/Engineer

We value the following technical skills:

• Hands-on experience in Cloud Native Technologies such as microservices, DevSecOps, and Container Platforms
• Proficiency in designing and developing microservices using at least one programming language, preferably C# .NET.
• Good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)

We also value the following soft skills:

• Can-do attitude and willingness to interface with multiple stakeholders.
• Excellent troubleshooting, follow-through, and problem-solving skills, with attention to detail.
• Excellent verbal and written communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Research Engineer/ Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges.

We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will work closely with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

• Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.
• Implement MLOps best practices to automate model training, deployment, and monitoring processes.
• Implement and optimize machine learning algorithms and deep learning architectures.
• Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.
• Optimize AI pipelines for scalability, reliability, and performance.
• Conduct performance analysis and optimization to improve model efficiency and accuracy.
• Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

• Bachelor or Master Degree in Computer Science/Engineering or relevant disciplines
• Must have a minimum of 5 years of experience as a Software Developer/Engineer
• Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerisation Technologies
• Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular
• A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)
• Can do attitude and happy to interface with multiple stakeholders
• Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail
• Excellent verbal and written communication skills
• Hands-on experience with machine learning frameworks/libraries
• Understanding of machine learning algorithms and techniques
• Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

ABOUT THE ROLE

We are seeking a highly motivated Research or Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. If you are independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges, this is the role for you.

JOB DESCRIPTION

• Develop, test, and maintain enterprise planning systems and applications.
• Analyze complex problems related to resource planning and scheduling, identifying potential solutions, and implementing the most effective one.
• Collaborate with other developers and stakeholders to deliver high-quality software products.
• Deploy software to production environments and provide ongoing maintenance and support to customers.
• Take responsibility for documenting code with technical specifications, user manuals, and other documentation to facilitate understanding and maintenance by other team members.
• Identify and address bottlenecks, inefficiencies, and scalability issues to ensure optimal performance of the software system.

JOB REQUIREMENT

• Bachelor's or Master's Degree in Computer Science or Engineering or relevant disciplines.
• Minimum of 2 years of working experience as a Software Developer/Engineer

We value the following technical skills:

• Hands-on experience in Cloud Native Technologies such as microservices, DevSecOps, and Container Platforms
• Proficiency in designing and developing microservices using at least one programming language, preferably C# .NET.
• Good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)

We also value the following soft skills:

• Can-do attitude and willingness to interface with multiple stakeholders.
• Excellent troubleshooting, follow-through, and problem-solving skills, with attention to detail.
• Excellent verbal and written communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The School of Materials Science and Engineering (MSE) provides a vibrant and nurturing environment for staff and students to carry out inter-disciplinary research in key areas such as Computational Materials Science, Characterisation Materials Science, Defence Composite Materials, Functional Composite Materials, Energy, Nanomaterials, Low Dimensional Materials, Biomaterials Materials, Biological Materials, Bioinspired Materials and Sustainable Materials.

For more details, please view https://www.ntu.edu.sg/mse/research.

We are looking for a Research Fellow to work on a new project on fats differentiation studies.

Key Responsibilities:

• To work on cultivated meat project
• To support research work on biological aspects of alternative protein technology.
• To oversee the progress of various related projects

Job Requirements:

• Masters/PhD Degree in molecular biology, and related degrees
• Experience in cell differentiation, particularly adipose cells biology; cultivated meat will be viewed favorably
• Excellent knowledge of adipose derived stem cells biology and differentiation into fat cells
• Cultivated meat industry knowledge
• Good hands-on experience on all related characterization
• Good written and oral communication skills
• Ability to work independently, develop solutions under strict timelines
• Meticulous and eye for details
• Excellent organizational and time management skills

We regret to inform that only shortlisted candidates will be notified.

Job Description

• Develop and oversee execution of the MedTech Pillar"s strategy with a focus on value creation for members
• Work with Pillar Tech Lead and PM Lead to align on strategy and priorities
• Manage and development Pillar"s Anchor and Tier 1 accounts
• Develop business case and work with PI and PM to initiate and to secure joint labs with Anchor and Tier 1 members
• Ensure overall "health" of Pillar and performance targets are met
• Report to BD Director

Requirements

• Bachelors or Masters qualifications in a relevant field such as Business Management preferred
• Minimum 8 to 10 years of relevant experience
• Experience in leading and managing sales or business development teams
• Proven track record of business development, driving sales or revenue growth
• Knowledge in developing and executing marketing and sales strategy
• Good verbal and written communication

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 5-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness. Smart Virtual Systems (SVS) Group is seeking a highly motivated Scientist/ Senior Scientist to lead and conduct research in predictive modelling, as well as AI-driven search and optimization algorithms for enabling human-centric enterprise resource planning and scheduling. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges.

The key roles & responsibilities include:

• Research into novel learning-centric optimization algorithms for efficient multi-resource planning.
• Work with a team of scientists and engineers to enhance and develop the planning capabilities of existing or new enterprise decision-support system
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the latest trend in manufacturing domain (e.g., Industry 5.0) and provide innovative solutions to industry problems in this area

Job Requirements

• PhD degree in AI, Computer Science, Operations Research, or other relevant disciplines with emphasis on optimization, machine learning and data-science
• 5 years' experience in research and leadership of R&D projects in the relevant area of expertise (for Senior Scientist).
• Programming/coding skills in developing optimization and machine learning algorithms.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Can do attitude and happy to interface with multiple stakeholders
• Proactive team player and technically motivated to solve problems innovatively

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 1-2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 8-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness. Smart Virtual Systems (SVS) Group is seeking a highly motivated Scientist/ Senior Scientist to lead and conduct research in predictive modelling, as well as AI-driven search and optimization algorithms for enabling human-centric enterprise resource planning and scheduling. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges.

The key roles & responsibilities include:

• Research into novel learning-centric optimization algorithms for efficient multi-resource planning.
• Work with a team of scientists and engineers to enhance and develop the planning capabilities of existing or new enterprise decision-support system
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the latest trend in manufacturing domain (e.g., Industry 5.0) and provide innovative solutions to industry problems in this area

Job Requirements

• PhD degree in AI, Computer Science, Operations Research, or other relevant disciplines with emphasis on optimization, machine learning and data-science
• 8 years' experience in research and leadership of R&D projects in the relevant area of expertise (for Senior Scientist).
• Programming/coding skills in developing optimization and machine learning algorithms.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Can do attitude and happy to interface with multiple stakeholders
• Proactive team player and technically motivated to solve problems innovatively

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 2-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

Responsibilities:

• Responsible for leading and managing a large-scale grant-funded programme across various IHL/RI* collaborators and industry partnerships (*Institute of Higher Learning / Research Institute)
• Programme manager will be leading the programme proposal to secure funding and coordinate cross-project activities to accomplish strategic objectives by overseeing multiple project activities across various research institutes
• Organise and lead programme reviews with/across funding agencies, strategic oversight committee and senior management
• Build confidence within internal management and external stakeholders with regular programme reporting and establishing clear communication channels
• Manage a small team of project managers to ensure successful delivery of projects scope and targets via managing project risks, quality, delivery, scope, schedule, and budget.
• Oversight of the full life cycle of R&D projects and its product delivery – planning, organizing, executing and evaluating from conception to completion.
• Manage and implement project/programme changes and interventions to achieve project deliverables and mitigate risk.

JOB REQUIREMENTS

• Bachelor or Masters in any engineering / project management related discipline
• At least 5 year(s) of working experience in product development or research project would be preferable
• PMP certifications or equivalent will be advantageous
• Good level of understanding of technical/engineering processes in order to work effectively with project managers and teams throughout the project development cycle.
• Strong business acumen, driven to deliver customer requirements and project deadlines
• Outstanding programme/project management capabilities; i.e. planning, risk management, status reporting, budget tracking, benefits analysis, stakeholder management, resource management
• Proven track record of executing multiple successful programmes/projects
• A leader-cum-team player technically motivated to solve problems, innovate and deliver to internal and external customers
• Strong communicator with excellent interpersonal skills

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 4-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.