Civil site engineer

Responsibilities

- Reporting to Civil Manager

- Responsible for the civil construction of the power plant station

- Plan and prepare station requirements (Subcon, suppliers, materials, equipment) based on the baseline program and work with the technical/contracts department to finalize and submit for approval

- Achieve progress through programs and within budget

- Control the usage and minimize wastages of major building materials such as rebar, concrete, and formwork materials, amongst other materials

- Carry out daily team meetings and site walks with project staff and produce tasks and action plan notes

- Invoke sequenced handover of works and track actual progress vs planned

- Prepare progress report for Manager to review

- Liaise with site team/ subcontractors on the scheduling and execution of all structural/ architectural/ M&E works

- Liaise with the Design team on engineering technical issues

- Manage traffic / underground services diversion and temporary works

- Requisition of required manpower, subcontractors, and suppliers

- Liaise with Quality and EHS departs to implement on-site

- Control subcontractors and suppliers for the timely closure of issues relating to quality and safety

- Plan and prepare MSRA/Documents for necessary permit based on baseline program, including government and owner (company) permit, and work with technical/contracts department to finalize and submit for approval

Requirements :

- Must possess min 5 years of engineering experience with Degree in Civil Engineering recognized by the PE Board or qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer OR recognized degree in the relevant field subject to the acceptance of the Engineer and at least 3 years of experience in managing civil and infrastructure construction work for projects of similar scale in Singapore, complexity and nature of work

- Must possess all the training certificates required on a civil supervisor

- Familiar with local engineering/construction laws and regulations in Singapore

- Familiar with engineering Permit, License, Approval etc. in Singapore is a plus

- Have more than two project construction experience, EPC project management experience is preferred

- Able to start work on short notice will be an advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

This might be your unique Opportunity to sell our Decarbonisation system – it’s retrofit during normal vessel operation ensures fastest savings for our customers thus best sales opportunities for you!

The global CII rule boosted our business, now we need another motivated new team-member to support our global growth in Singapore & Asia!

You shall

• Contact prospective customers, introduce our solutions and secure orders
• Manage & expand our customer base
• Deliver technical presentations explaining our products and services
• Overlook technical order processing
• Develop our Sales Organisation in Asia

We expectyou to bring us

• 3+ years experience of technical Sales to Ship Owners & Operators
• Experience with technical retrofit projects
• Independent and results-oriented team work
• Willingness to grow with our organisation

Job Summary:

We are seeking an experienced Senior Vacuum Coating Engineer specializing in sputtering technology to join our team focused on the development and manufacturing of perovskite thin-film solar modules. The ideal candidate will lead the design, optimization, and scaling of vacuum-based sputtering processes for thin-film deposition, ensuring high efficiency, uniformity, and durability in solar module production.

Key Responsibilities:

1. Process Development & Optimization:
   • Develop and optimize sputtering processes for deposition of thin films, including metal oxides, metals, and transparent conductive layers for perovskite solar modules.
   • Ensure thin-film uniformity, adhesion, and electrical/optical performance through advanced process tuning and control.
   • Drive innovation to improve layer quality, throughput, and yield.

2. Equipment Management & Scaling:

• Select, install, and maintain sputtering equipment to meet R&D and production goals.
• Collaborate with vendors to integrate new technologies and enhance equipment capabilities.
• Troubleshoot and resolve process and equipment issues effectively.

3. Cross-functional Collaboration:

• Work closely with material scientists, device engineers, and manufacturing teams to ensure compatibility of thin-film layers with perovskite solar cell designs.
• Support the scale-up from lab-scale to pilot and full-scale production.

4.Data Analysis & Quality Control:

• Perform rigorous characterization of sputtered films using tools like SEM, AFM, XRD, and spectrophotometry.
• Implement robust quality control protocols to ensure consistency across batches.

5. Research & Innovation:

• Stay up to date with advancements in sputtering and thin-film technologies.
• Contribute to intellectual property development and patent applications.

Qualifications:

Education & Experience:

• Bachelor or Master in Materials Science, Physics, Chemical Engineering, or a related field.
• Minimum of 5-7 years of experience in vacuum coating, specifically sputtering, preferably in the thin-film photovoltaic, display, or semiconductor industries.

Technical Skills:

• Expertise in physical vapor deposition (PVD), including RF and DC sputtering.
• Familiarity with perovskite material systems and thin-film deposition challenges.
• Hands-on experience with vacuum system design, operation, and maintenance.
• Proficiency in thin-film characterization techniques.

Soft Skills:

• Strong problem-solving skills with attention to detail.
• Ability to work collaboratively in interdisciplinary teams.
• Effective communication and project management skills.

Preferred Qualifications:

• Experience in scaling sputtering processes from R&D to high-volume manufacturing.
• Knowledge of encapsulation techniques and moisture barrier layers for perovskite solar modules.
• Understanding of ISO standards and cleanroom protocols.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare tender and contract documents, including bills of quantities.
• Evaluate tenders from contractors and subcontractors and, where appropriate, negotiate with the contractors.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to client and subcontractors to facilitate the smooth workflow process.
• Communicate with the client, management, sub-contractors and keeps track of the progression of both main contract and sub-contract.
• Monitor and keep track of project progress and are responsible for the measurement and valuation of variations in the work during the contract, for agreement of interim payments and the final account.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Bachelor's Degree in Quantity Survey or equivalent.
• More than 4 years of working experience in the related field is required for this position.
• Acquired with both civils and architectural knowledges is preferable.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• 5.5days work week

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Lead and supervise a group of Technicians/Technical Assistants and manage contractors in the execution of refinery maintenance activities.
• Implement reliability programs and develop maintenance procedures for instrumentation & electrical equipment to facilitate consistent execution of maintenance tasks.
• Investigate instrument & electrical equipment failures or malfunctions in order to identify root causes of problems as well as recommend and implement solutions.

• Degree in Electrical and Electronics Engineering.

• 2 years' relevant experience in oil refinery/petrochemical or related industries. Candidate without relevant experience may be considered for entry-level position.
• Knowledge of DCS, PLC and ESD systems is preferred.

Your Mission

This position is responsible for driving activities related to digital transformation as a member of the Program Management Office at HMGICS. The role involves developing revenue generation and operational models for training, advisory, and solutions focused on digital transformation and new manufacturing technologies. Additionally, the position will serve as the junior chief of staff to the Chief Innovation Officer, with the potential to assume full responsibilities within the short-term, based on performance.

What To Expect

[1. PMO Member for Digital Transformation - 20%]

• Help define and enforce agile work processes to continually improve the velocity and impact of digital transformation activities undertaken by the relevant technology and manufacturing squads. As a member of the PMO squad serving Digital Transformation, this involves applying core technologies such as IoT, AI/ML/LLM, simulation, and automation to enhance operational performance.
• Engage with all relevant stakeholders within and outside HMGICS to develop insights that accelerate digital transformation.

[2. Revenue Generation and Operational Models - 50%]

Develop new revenue generation and operational models for HMGICS based on core capabilities. This may include, but is not limited to:

• Learning and training programs on Digital Transformation, e.g., for other manufacturing companies.
• Advisory and technology consulting services to assist companies in adopting digital transformation.
• Provision of core technology solutions.
• Other initiatives within the Hyundai Motor Group.

[3. Junior Chief of Staff - 30%]

Assist the Chief of Staff to the Chief Innovation Officer (CIO), with the goal of becoming the full Chief of Staff within 1-2 years:

• Actively manage the CIO Organization’s activities, time, and priorities to maximize impact and ensure the achievement of HMGICS's core objectives.
• Prepare briefing materials, presentations, and reports for executive meetings and communications on behalf of the CIO.
• Develop strong relationships with senior stakeholders within HMGICS, the Hyundai Motor Group, and external partners, with the aim of overseeing and coordinating cross-functional initiatives, particularly those related to Mission 2.
• Grow into a trusted advisor and thought partner for the CIO, providing insights and recommendations on critical decisions.
• Handle confidential and sensitive information with the utmost discretion.

What You'll Bring

• Bachelor's degree in Engineering (preferred); MBA is a plus.
• Minimum of 2 years of experience at a top-tier management consulting firm, with strong references.
• Technical expertise in process innovation and business consulting projects.
• Extensive project experience in digital transformation, capability building, and new business models.
• Exposure to the technology or automotive industries.
• Advanced proficiency in MS Office and MS PowerBI.
• Passion for the future mobility industry and a desire for accelerated growth within the organization.
• Strong interest in and familiarity with technology innovation and future tech trends, as well as business model creation.
• Inquisitive mindset with a focus on continuous improvement through innovative thinking and structured problem-solving.

Roles & Responsibilities

As part of a finance team who contributes to the ongoing effectiveness and efficiency of the new Real Estate development project, you will conduct the financial management, budget and cost control and forcasting of project development sector within the Group.

Responsibilities:

1.Establish project company’s financial management regulation, develop job responsibilities/scopes and related SOP

2. Daily bookkeeping and ensure accuracy and filing of files in a timely manner

3. Complete the financial statement and annual audit work

4. Manage consolidation and preparation of monthly and quarterly management reports, budgets and forecasts, cost control

5. Establish a financial analysis procedure and model, and report financial status to management regularly

6. Manage statutory filings including financial statements and tax

7. Prepare project capital plan and ensure proper cash flow and allocation of funds, as well as managing capital risks

8. Assist in cost analysis of investment and financing projects, and cooperate with the formulation of investment and financing plans

9. Other adhoc tasks assigned

Requirements:

1. Degree or professional qualification in Accountancy; CFA, ACCA, CPA and other qualifications are preferred

2. At least 3 years working experience in financial management of Real Estate development projects in Singapore, familiar with financing, taxation, cost control and other related to Real Estate development business

3. Familiar with Singapore's financial policies, corporate financial regulations, and procedures, and proficient in relevant financial and tax laws and regulations

4. Strong capabilities in capital management, cost control, risk control and financial analysis

5. Good organization, coordination, communication skills and teamwork spirit, have a strong sense of responsibility

Mon to Sat; Based in HQ

Job Description

• Establish and maintain processes for managing scope during the project lifecycle, setting quality and performance standards and assessing risks
• Structure and manage integrated, multitrack performance databases for digital, print, social, broadcast, and experiential projects
• Develop and maintain partnerships with third-party resources, including vendors and researchers
• Assign and monitor resources to ensure project efficiency and maximize deliverables
• Report project outcomes and/or risks to the appropriate management channels and escalate issues, as necessary, according to project work plan
• Lead projects from requirements definition through deployment, identifying schedules, scopes, budget estimations, and implementation plans, including risk mitigation
• Coordinate internal and external resources to ensure that projects adhere to scope, schedule, and budget
• Analyze project status and, when necessary, revise the scope, schedule, or budget to ensure that project requirements can be met
• Establish and maintain relationships with relevant client stakeholders, providing day-to-day contact on project status and changes

Job Description

• Manage and coordinate the overall use of BIM for project.
• Lead and/or assist in the creation of BIM deliverables such as BIM Execution Plans, Clash Detection Reports, BIM Quality Control Plans, BIM Design Review Procedures, Construction Sequencing (4D) and Cost Estimating (5D).
• Coordinate and collaborate on project wide BIM related matters with client and interfacing contractors and ensure design process and submissions comply with specifications and requirements
• Regular update and report on all BIM related activities’ progress and status to the SO.
• Verify and rectify all BIM related challenges and issues in the project.
• Oversee and manage all BIM Software to be used in the project, and to rectify issues relating to BIM Software.

Requirements

• Min Diploma/Degree in Engineering with relevant working experience in Construction industry.
• Have about 5 years of relevant experience in the implementation and management of CAD and 3D models.
• Have a comprehensive knowledge of related BIM technologies.
• Have BIM coordination or BIM management experience in a design, engineering or construction firm for a large project.
• Shall be expert in the BIM Authoring Tools.
• Ability to prioritize tasks well and has good presentation/communication skills.

Please note: This is not a Remote role and will require the incumbent to be based in Singapore and work a hybrid schedule. This is an Individual Contributor role.

POSITION OVERVIEW

The successful candidate will be a Senior Technical Lead within the TISC (Technical, Innovation & Supply Chain) architecture team supporting the CPS (Commercial Product Supply) and NAOU (North America Operating Unit) organizations through ensuring all technology delivered meets standards to drive supply chain transformation initiatives. This role is critical to enabling digital transformation through supply chain transformation and ‘plant of the future’ initiatives.

The role focuses on translating business needs into technical systems solutions, within a structured agile framework. This will entail defining systems in relation to enterprise infrastructure, executing activities related to business, IT and partnering with internal and external technical teams in the delivery of solutions. The candidate will have a key role in identifying and recommending products and features, evolving the organization's technical infrastructure as well as leading the implementation of new procedures and techniques.

QUALIFICATIONS & RELATED EXPERIENCE

• Bachelor’s degree in Computer Science, Engineering or significant practical experience in a related field.
• Minimum of 8 years related work experience preferably in manufacturing IT or process Industry.
• Must have proven experience working with IT, OT and supply chain architectures including designing, developing, deploying, managing, and scaling applications.
• Must have a strong practical knowledge of data management, data infrastructure, data Interfacing through Azure based deployments with a focus on maintenance and improvement.
• Should be proficient in supply chain end to end processes, using ERP systems (e.g. SAP).
• Advantageous additional desirable skills would include hands on experience at scale with workload management (Kubernetes). Some practical exposure to scripting (Python) and object orientated coding is also desirable.

KEY DUTIES AND RESPONSIBILITIES

• Design, develop and implement scalable, robust and secure IT & ITOT architectures that support the end-to-end supply chain lifecycle, including procurement, production, logistics, warehousing and distribution.
• Collaborate with business owners to respond to their needs with thought out technical requirements
• Designing and developing solutions in alignment with the enterprise architecture direction & standards and ensuring compatibility and ease of integration with company architectures.
• Oversee the integration of SAP/ERP supply chain applications, ensuring seamless integration with Ignition based infrastructure.
• Providing architectural support for business and ITOT applications by configuring, managing system settings, installing plugins and performing upgrades.
• Lead and guide the development of regional technical teams and junior staff in terms of future production enabling architectures.
• Exemplifying the use of DevOps, Github and other CI/CD tools and mentoring junior personnel in these behaviours.

What can help you be successful in the role?

Growth Behavior:

• Growth Mindset: Demonstrates Curiosity. Welcomes failure as a learning opportunity.
• Smart Risk: Makes bold decisions/recommendations.
• Externally Focused: Understands the upstream and downstream implications of his/her work.
• Performance Driven & Accountable: Has high performance standards. Outperforms her/his peers.
• Fast/Agile: Removes barriers to move faster. Experiments and adapts. Thrives under pressure and fast pace.
• Empowered: Brings solutions instead of problems. Challenges the status quo. Has the courage to take an unpopular stance.

Leadership Behavior

• Act Like an Owner: Deliver results, creating value for our brands, our System, our customers and key stakeholders.
• Collaborate with the System, Customers and Key Stakeholders
• Develops Self and Others: Develop self and support others' development to achieve their full potential.
• Drive Innovation: Generate new or unique solutions and embrace new ideas that help sustain our business.

What We Can Do For You

• Career growth and development: Leveraging our boundaryless network, we provide access to educational platforms and provide coaching, mentoring and feedback, as a part of our Leadership & Development process.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs. We want to make our culture inevitable.
• International Experience: Become part of international projects and work along multicultural teams, through our global network.

• Cooling Equipment, Chiller
• Basic up to $5000
• High Variable bonus + Mobile Allowance + Other Allowance
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities:

• Oversee and manage the projects assigned to ensure on track as per requirement
• Work closely with customers, engineers and contractors to assess equipment needs, and to determine system requirements.
• Prepare project document, drawing submissions and support other team members in execution and coordination
• Attend meeting with customer, team members and contractors where required
• Coordinate and schedule submission, delivery and T&C schedule with clients and contractors
• Performing quality control tasks on equipment, budgets, schedules, plans, and personnel performance and reporting on the project's status
• Ensuring the project's compliance with the applicable codes, safety practices, policies, performance standards, and specifications.
• Perform site survey to ensure that equipment is delivered and installed in proper manner as per requirement
• Perform and lead the T&C of equipment as per the timeline provided by clients
• Troubleshooting of equipment with RCA reports where required

Requirements:

• Diploma / Degree in Mechanical/Electrical Engineering or related field
• Flexibility to travel at any given time
• Prefer candidate with Class 3 driving license.

*Only shortlisted candidates would be notified**

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Quality Management System:

• Responsible for quality oversight of operations at PharmaGend Global Medical Services Pte Ltd facility. Adhere to laid down Quality Management System, its effective implementation and facilitate continuous improvement in all manufacturing area activities, and effective resolution of routine Quality issues.
• Tracking, trending and closing QMS events using TrackWise. Review and Approval of documentation associated with key quality compliance indicators - Deviation, Market Complaints, Product Recalls, CAPAs, Change Controls, Returned Goods and other quality system documents e.g., Product Quality Review, SOP's, Protocols, reports as appropriate; and actively participate in investigations.
• Subject matter expert in Qualification and Validation activities related to GMP area, production equipment and key utilities e.g., Purified water system, Compressed air system.
• Review periodically the Quality Performance parameters, review and approve appropriate remedial actions towards compliance and Quality of products supplied. Identify proactively the actions towards continuous improvement and measure performance of Quality through various tools / Quality Indicators.
• Escalate the quality events, trends as appropriate to various management levels in organization for appropriate regulatory actions as applicable and provide close-out actions as deemed necessary / required.
• Ensure timely review and / approval of executed batch records, and final batch release to market. and disposition (Release/Rejection) of in-process and finished product batches as appropriate.
• Implement ongoing process management mechanisms (process mapping, documentation, metrics, monitoring systems and process control techniques).
• Perform periodic review of Quality Performance parameters and approve appropriate remedial actions towards compliance and Quality of products supplied. Identify proactively the actions towards continuous improvement and measure performance of Quality through various tools / Quality Indicators, provide Quality Management Reports.
• Escalate the quality events, trends as appropriate to various management levels in organization for appropriate regulatory actions as applicable and provide close-out actions as deemed necessary / required.
• Conduct internal audits and/or vendor audits as required.
• Ensure the SOPs are in line with the practice and revision thereof if required.
• To ensure that the facility is kept all time ready to handle any regulatory, customer or internal audit.
• Act as a designee to for Head Quality on QMS related matters.

Documentation Compliance:

• Review and approval of master BMR/BPR and issuance of BMR/BPR.
• Control and Management of archived documents.
• Preparation and Review of SOPs/Work instructions and forms related to quality assurance and cross functional departments.
• Review and approval of protocol and reports.
• Ensure effective control of confidential and all technical documents and information networking, timely review and approval of relevant technical documents.

Quality Risk Management:

• Participate in Identification and implement risk approach in validation / qualification area based on overall risk management policy / guidelines to control / mitigate risks.
• Apply risk management tools and techniques.

People Management including Technical Training:

• Assign responsibilities, monitor performance, counsel & provide feedback on team performance, plan & monitor required training and development to ensure a committed & competent team.
• Build strong and positive cross-functional working relationships by working to include them in the improvement activities/training, making sure their needs and requirements are carefully considered.
• Conduct Technical Training (On the Job as well as Classroom) to fellow colleagues, new employees and cross functional team.

Management of interface with Regulators/Customers

• Interact with customers/regulatory bodies in a timely manner to address quality / technical related events to ensure desired outcome and adherence to regulatory commitment and compliance.
• Interpret current Regulatory guidance and implement at site.
• Management technical agreement with ESP and clients.
• Updating GMP Documents as per Regulatory amendments and process requirements.
• Ensure compliance with various regulatory commitments, regulatory requirements and customer requirements as applicable including policies.

Requirements:

• Bachelor’s degree and/or Maste’s degree in Pharmacy or Chemistry.
• At least 10 to15 years of experience, demonstrated ability to execute against the strategic and tactical objectives provided by senior leaders both within Quality and outside of the function.
• More than 8 years’ experience in pharmaceutical validation, qualification projects.
• In-depth understanding of Manufacturing/Pharma Business
• Strong team leadership skills
• Strong staff coaching and development skills.
• Strong ability to communicate.
• Strong ability to influence in a team environment and collaborate with peers.
• May participate in interactions with various governmental agencies/regulators and external auditors.
• Strong understanding of US FDA regulatory requirements.
• Serves as an active member of the Quality Management Team
• Serves as an expert to identify best practices across the organization, shares and implements as appropriate.
• Interacts with site efforts to ensure consistency in policies and practices.

Wärtsilä is an innovative technology company known for being a forerunner in the Marine and Energy markets. Every day, we – Wärtsilians - put our hearts and minds into turning Wärtsilä's purpose of enabling sustainable societies through innovation in technology and services into reality. Our ultimate aim is to provide increased value to both our customers and society. New, game-changing ideas and continuous improvement have been part of our DNA since 1834. Together, we can create new business opportunities and more sustainable future that we can all be proud of.

We want to transition the world towards a decarbonised and sustainable future. By pushing the boundaries of engineering and technology, we can make it work. We are always on the lookout for future-oriented talent – want to join the ride?

As ANCS (Automation, Navigation & Control Systems), we transform how vessels perform to create the safest and most efficient journey for our customers – always with the vision in mind to navigate towards a more sustainable maritime industry. With our rich history of pioneering maritime technologies we have defined industry benchmarks.

To be better tomorrow, we need the right talents today to complement our strong team of 650 employees in over 10 countries across the globe with the right skills, experience and a winning attitude.

We are looking for a Senior Manager Parts Coordination Management (m/f/d) to join our team.

The preferred location for the position is in Hamburg (Germany), but also Hørsholm (Denmark) or Pandan Crescent (Singapore) are possible location.

What you will be doing

As Senior Manager you will be responsible for overseeing the shipment and replacement procedures. More importantly you will be responsible for providing guidance, instruction and training to inspire the parts team to perform at their optimum. You should create a cohesive team that works efficiently to ensure a flawless customer experience related to ANCS part deliveries. The team operates from various country locations among them Germany, Denmark, Netherlands, Norway, Italy, USA, Singapore, Korea and China.

As PCM Manager you will:

• Provide overall leadership and administrative management forapproximately 25 to 30 team members which includes:
  • defining roles and responsibilities
  • conducting performance reviews, development discussions and target settings
  • participating in salary planning
  • promoting professional growth through timely performance feedback, coaching, and counselling
• Work across teams on developing and implementing delivery processes, ensuring one global aligned way of working
• Work towards continuous process improvements and overall process compliance
• Support cost reduction efforts, and identify cost take out
• Organize reporting and controlling
• Define strategy and operational objectives for the team, clear team goals and KPIs
• Ensure the transfer of knowledge within the team
• Ensure the highest level of quality and response time for part deliveries
• Oversee day-to-day teams' operation and performance
• Create a healthy and motivating work environment
• Cooperate with relevant internal and external stakeholders.
• Work in accordance with business as well as quality, health, safety, and environmental guidelines

Success measures:

• Sales & Margin
• Working Capital
• Response Times
• Customer satisfaction
• Employee Satisfaction

To be successful in this role, we expect you to have:

• Technical or commercial studies with corresponding professional experience, preferably experience in leadership role with decentralized teams
• Great interpersonal and communication skills (across cultures and functions)
• Ability to create and maintain a healthy and motivating work environment
• Critical thinking and problem-solving skills
• Quick decision-making skills
• Sense of ownership and pride in your performance and its impact on the company’s success
• Team player
• Good time-management skills
• Customer centric mindset

Other qualifications/skills include:

• experience with process development and optimization
• In-depth SAP knowledge

It’s a plus if you:

• are familiar with the maritime business and regulatory environment
• have knowledge of the NACOS Core product portfolio
• fluent English language skills (spoken and written)

In this role, some travel is required to meet with our customers around the world. Thus, we hope you to be ready to travel approximately 40%, even though most of the meetings are held virtually.

Why you and us?

We at Wärtsilä believe in empowerment, ownership and taking responsibility of our work. We support each other’s growth and co-creation is the true basis of our innovation. We have courage to see opportunities and take initiative.

We are authentic and honest, and we strongly believe in that by being your own true self you can accomplish so much more. We don’t always get it right the first time, and if mistakes are made, we make sure to learn and grow from them. We want everyone to voice their opinions freely. That is why we have built an environment that empowers you and everyone around you, and where you can feel safe and cared for. Are you eager to be part of this ambition?

We have an amazing team and we are excited about our work and the impact it has on building sustainable societies. We are looking to find a colleague with this shared passion for smart technologies and a sustainable future.

*Job Summary:*

Responsible for managing procurement, logistics, and supply chain activities for projects in Singapore, ensuring compliance with government regulations, manufacturer standards, and company policies.

*Key Responsibilities:*

*Procurement Management:*

1. Conduct market research on Singapore material market, including government regulations, manufacturer resources, and material production standards.

2. Coordinate subcontracting bidding and inquiry work.

3. Manage domestic material suppliers, including potential supplier inspections, data collection, and qualified supplier reviews.

4. Receive, review, and register procurement plans in the ledger.

5. Conduct bidding/inquiry procurement, prepare and review bidding documents, and negotiate contracts.

*Logistics and Supply Chain Management:*

1. Familiarity with Singapore customs policies and procedures.

2. Research domestic transportation agents, ports, customs clearance processes, and permit requirements.

3. Track shipment of domestic equipment, manage customs clearance documents, and publish shipping information.

4. Manage unloading ships at ports, customs clearance, and domestic transportation.

5. Ensure transportation safety and obtain necessary permits for large-scale transportation.

Data Management and Administration:

1. Maintain procurement management ledgers (planning, contract, invoice, guarantee).

2. Organize and archive paper-based materials.

3. Manage funding plans, review and submit domestic procurement invoices, and track payments.

4. Balance inventory management of domestically procured materials.

5. Utilize project cost management software.

*Risk Management and Quality Control:

1. Identify and control procurement management risks.

2. Lead quality control of domestically procured materials.

3. Ensure delivery schedules meet project milestone requirements.

4. Manage safety of unloading and transportation of materials.

*Claims and Insurance:*

1. Provide documents required for insurance claims (bills of lading, certificates of origin, etc.).

2. Coordinate logistics companies to issue damage, loss, and accident report materials.

*Requirements:*

- Familiarity with Singapore material market, customs policies, and logistics procedures.

- Strong organizational, communication, and negotiation skills.

- Ability to manage multiple tasks and deadlines.

Job Description

• Review engineering drawings, specifications, and technical submittals to ensure alignment with project requirements.
• Collaborate closely with multi-disciplinary teams to integrate MEICA systems seamlessly into existing building design, ensuring compatibility and optimal operation.
• Conduct technical reviews of MEICA engineering designs and proposals, recommending improvements to optimise equipment constructability and efficiency.
• Develop MEICA construction plans, sequencing, resource allocation, and logistical considerations.
• Prepare cost estimates for MEICA components and services, considering design changes and project specifics.
• Provide technical leadership in the installation of MEICA systems.
• Oversee the entire MEICA construction process, ensuring strict adherence to technical specifications, industry standards, safety standards, and best practices.
• Supervise and mentor MEICA construction team, subcontractors, and vendors.
• Collaborate closely with the client / stakeholders, addressing technical inquiries and ensuring MEICA systems align with their operational requirements.
• Enforce strict safety protocols and industry regulations on the construction site.
• Provide regular project updates, technical reports, and installation strategies to clients and stakeholders.

Requirements

• Bachelor's degree in Civil, Mechanical or Electrical, or a related field.
• 15 years of experience in the planning and construction of waste to energy plants or major process industry / industrial / infrastructure projects.
• Proven track record as a MEICA construction manager in large scale projects, managing internal / external stakeholders – HSE, QA, Subcontractors, Suppliers, Client, Authorities.
• Proficiency in planning, scheduling, and resource management
• Ability to identify and address construction challenges and issues promptly.
• Excellent organizational and problem-solving skills, with the ability to prioritise tasks and manage multiple tasks simultaneously.
• Strong communication and interpersonal skills to collaborate effectively with various stakeholders.
• Demonstrated leadership abilities and the capacity to motivate and develop a team.
• Knowledge of safety and regulatory compliance requirements related to construction logistics.
• Flexibility to adapt to changing project needs and work in a fast-paced construction environment.
• Profound knowledge of MEICA systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust spanning across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

Responsibilities:

• Revenue Generation: Lead efforts to achieve revenue targets for the business areas. Develop and implement channel strategies with focus vendors in the Government and Enterprise sectors. Drive profitability through strategic partnerships and collaborative initiatives.
• Customer and Vendor Engagement: Collaborate with internal teams to establish a customer engagement model that ensures exceptional customer experiences. Foster strong relationships with focus vendors and assist in establishing a vendor engagement framework. Conduct quarterly business reviews with focus vendors, providing feedback and strategies for improvement.
• Agile Project and Tender Support: Refine existing processes to support agile project and bulk tender requirements. Streamline onboarding, training, and certification processes to ensure efficiency and effectiveness in project delivery. Identify areas for improvement and implement best practices.
• Go-to-Market Planning: Conduct GTM planning and quota setting in collaboration with focus vendors. Develop comprehensive strategies to penetrate target markets and drive market share growth. Monitor partner program status and compliance to maximize partner performance.
• Contract Management: Track contracts and legal obligations with focus vendors. Ensure compliance with contractual terms and conditions. Proactively manage contract renewals and extensions.
• Relationship Management: Cultivate and manage key relationships with focus vendors. Collaborate with internal stakeholders, such as sales, marketing, and product teams, to drive growth and support joint initiatives. Act as a liaison between internal and external stakeholders to ensure smooth collaboration and effective execution.

Requirements:

• Proven track record of achieving revenue targets and driving growth through strategic alliances, preferably in the information security industry.
• Strong understanding of the Gov, Enterprise, and commercial sectors, including key market trends and customer dynamics.
• Exceptional relationship-building skills with the ability to influence and collaborate effectively with internal and external stakeholders.
• Excellent project management and organizational skills, with the ability to prioritize and manage multiple initiatives simultaneously.
• Demonstrated business acumen and analytical skills to drive data-driven decision-making.
• Strong communication and presentation skills to effectively articulate strategies, plans, and results to stakeholders at all levels.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

- Assist in the preparation of project plans, schedules, and budgets for project

- Ensure compliance with project specifications, technical drawings, and industry standards

- Oversee daily site operations related to the installation, testing, and commissioning of pump systems

- Monitor progress against project schedules and address delays or bottlenecks

- Support the technical design and engineering of pump systems, including reviewing schematics and recommending improvements

- Troubleshoot and resolve technical issues during installation and operation phases

- Conduct inspections to ensure workmanship quality and adherence to project specifications

- Manage project resources, including manpower, tools, and equipment

- Monitor and control inventory related to the project

- Prepare and maintain project documentation, including progress reports, inspection records, and technical documentation

- Attend project meetings and provide updates on progress, challenges, and solutions

- Ensure all project activities comply with local regulations, safety codes, and environmental standards

Job Description & Requirements

• Monitor and manage day-to-day operations of projects, or function, including developing and monitoring budgets, coordinating activities with other sub-contractors
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Liaise with consultants and/or sub-contractors engaged on the project
• Attend regular meetings with owner/client/contractors/sub-contractors and ensure the progress is on schedule
• Resolve any unexpected technical difficulties and other problems that may arise
• Monitor and ensure subcontractors comply with specified requirements
• ldentify and comply with all applicable statutory regulatory requirements related to project
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks
• Respond swiftly to work delays, emergencies and other problems
• Clear communication to external parties including client, subcontractors, consultants, vendors etc. on project needs, requirements and schedule by means of daily construction oversight
• Review all method statement of the activities ensuring safe execution and maximization of resources used for job efficient
• Prepare monthly site report updating the latest progress and planning to achieve the project milestone
• Complete task as assigned by Project Manager and Project Director

Requirement:

• Candidate must possess at least Bachelor's Degree in Civil Engineering
• At least 10 years of engineering experience in the related field is required for this position
• At least 5 years of experience in managing civil and infrastructure construction work for projects of similar scale, complexity and nature of work
• Work as Team leader, leading team on project requirements and target achievement
• Acting as rigorous preson on Identify possible risks in project

• Post job advertisements, screen resumes, arrange interviews, and assist with recruitment decision-making

• Oversee the onboarding process, conducting orientation, and monitoring probationary performance

• Leave and benefit claims administration

• Assist with the application and renewal of Employment Passes (EP), monitor work pass expiration dates and handle timely renewals

• Timely submission of Government Survey

• Assist the CEO with travel claims and arrangements

• Handle travel arrangements for the team, including flight bookings, hotel reservations

• Oversee administrative matters like insurance claims, pantry supplies etc

Job Requirements:

• Diploma or Bachelor's degree, preferably in Human Resources or related field

• Minimum of 3-5 years of HR experience, with comprehensive knowledge of full-spectrum HR functions

• Familiar with Singapore labour laws and immigration policies

• Excellent communication and interpersonal skills, with the ability to work across cultures and time zones.

• Excellent organizational and multitasking abilities

• Detail-oriented, proactive, and capable of handling complex matters independently

• Bilingual

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Job Description

• Responsible for content planning and creation of marketing collaterals and assets, including copywriting and editing for newsletters, electronic direct mails, brochures, fact sheets, blog articles, case studies, videos, and website.
• Plan and implement integrated marketing campaigns for solutions, events and exhibitions.
• Generate content for digital marketing channels and social media platforms.
• Collaborate with agencies, external vendors and internal stakeholders to develop and ensure the timely delivery of social media campaigns and optimise performance metrics.
• Identify new marketing channels, platforms and media that better achieve marketing and business objectives.
• Assist in ad hoc marketing tasks and activities.

Job Requirements

• Experience in marketing communications and related fields.
• At least 5 years of experience in marketing or corporate communications.
• B2B experience preferred but not mandatory.
• Excellent command of the English language and storytelling skills.
• Independent self-starter with attention to detail.
• Strong project management skills.
• Excellent interpersonal and communication skills.

Today, Lonza is one of the world’s largest healthcare manufacturing organizations operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

This role is responsible to perform the role of a Project Manager for all site Tech Transfer (TT) projects, with the focus on all Engineering activities associated with site readiness and collaborate in a cross-functional environment to drive the TT to completion.

Key responsibilities:

• Provide oversight of all site wide readiness activities for TT, including capital equipment introduction, modification of existing facility or equipment, development of process and cleaning circuits, till handover for routine manufacturing (beyond PPQ campaign if required).
• Work with key collaborators to define packages and activities required at commencement of the TT project, including areas like Manufacturing, Engineering and Supply Chain Warehouse.
• Develop overall site TT project plan and high level schedule to incorporate activities associated with business readiness to meet site’s MPS target dates.
• Ensure adherence to overall TT schedule.
• Ensure that the different collaborators are aligned with the overall project plan and facilitate handshakes between MSAT, Manufacturing, Engineering, Quality and Warehouse teams for site readiness activities.
• Ensure that each package or major activity has clear ownership. Ensure each owner sets up their own project plan, task accountability, monitoring and critical issue workflows. Work with each owner to identify task dependency and deconflict activities.
• Recognize potential gaps in equipment design and collaborate with collaborators, customers, partners, and team members to achieve resolutions.
• Identify resource gaps and acquire appropriate resource from resource managers.
• Identify TT workflow improvements via AAR and secure the support to implement these improvements.
• Evaluate project changes requirements and their associated impact, offer support to collaborators and sponsors for changes that may influence TT delivery.
• For project change requirements extending beyond Engineering campaign, ensure that these are collected under a Hypercare plan with committed budget, resources and timeline. Oversight these changes and activities under Hypercare until completion.
• Provide updates in site weekly TT meetings and TT IPTs.
• Ensure that end user review new equipment/facility usage for long term operational sustainability, e.g. review equipment occupancy at the desired cycle time. Evaluate options if further equipment/facility changes are needed and transfer accountability of these changes to responsible owner.
• Any other duties as assigned by Supervisor/Manager.

Key requirements:

• Bachelor Degree / Diploma with exposure in the Biopharmaceutical industry.
• Experience in Biopharma industry, GMP environment, FDA/EMEA exposure.
• Experience working in matrix environment, establishing relationship with both internal and external customers.
• Strong verbal and written communication skills to collaborate with cross functional collaborators
• Critical thinking and analytical skills to be able to identify weaknesses and strengths of alternative solutions or approaches to problem-solving.
• Good technical knowledge of engineering, manufacturing and project management skills.
• Ability to thrive under pressure and can take care of multiple requirements whilst still meeting all critical deadlines.
• Demonstrate a passion to learn, learn from mistakes and can share ideas throughout the organization.
• Ability to operate independently with minimum supervision.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.