As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities

• The candidate will be required to perform electrical testing, test data analysis & automation across SiC power and RF/mmWave GaN devices.
• The candidate hands-on characterization work will encompass from low voltage I-V/C-V to high voltage breakdown, switching performances for SiC, and DC & high-frequency characterizations for RF/mmWave regime.
• The candidate must have hands-on experienced in handling Keysight 4156C and B1500A/Keithley K4200 Device Analyzer, B1505A High Power Device Analyzer with N1265A UHC Fixture and Keysight 4284A/4285A and E4908A LCR Meter independently on their own.
• It will be a plus if the candidate has knowledge of instrumentation control using LabView and some other software like Python, C++ etc .
• The candidate is required to have at least some basic semi-conductor knowledges of semi-conductor devices like P-N Junction, Diodes, CMOS etc.
• The candidate can be exposed to process and device design/simulation with commercial TCAD tools (e.g. Silvaco Victory Process and Victory Device, Sentaurus Process and Device, etc) as part of the learning development and eventually be working on wide bandgap devices team.

Qualifications:

• Bachelors / Masters' degree in Electrical Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, Chemistry, Physics or equivalent.
• At least 5 years of relevant experience. Applicants with relevant study (Electronics, Microelectronics, Computer Engineering, etc) can be considered.
• Strong communication, industry awareness, and problem-solving skills.
• Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to "get things done".
• Industry experience is a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

YouTrip is a Southeast Asian financial technology company dedicated to creating the next-generation of digital financial services for consumers and businesses. In 2018, we launched the region’s first and leading multi-currency payment app.

With our consumer and corporate products, YouTrip and YouBiz, we empower users with the most affordable and convenient financial innovations. YouTrip is a Major Payment Institution licensed by the Monetary Authority of Singapore (MAS), and owns principal memberships and issuing licenses with two of the largest card schemes, MasterCard and Visa.

YouTrip has been recognised by industry experts, winning awards for FinTech Employer of the Year by MAS and Singapore Fintech Association (SFA), Most Innovative FinTech Company in Southeast Asia and Best SME Finance Management Platform from APAC Insider’s 2023 Singapore Business Awards. We were also recently recognised as one of the Top Startups in Singapore by LinkedIn, further cementing our position as a leading fintech company in the region.

Our culture is entrepreneurial, open & inclusive, and teamwork-oriented. We are looking for talents with the aspiration to thrive in a rapidly growing business in the exciting FinTech space.

Job Description: DevOps Engineer

As a DevOps Engineer, you will be responsible for bridging the gap between development and our AWS based infrastructure, ensuring the seamless integration of these two critical functions. Your role is pivotal in enhancing our software delivery processes and maintaining a reliable infrastructure. You will work at the intersection of technology, collaborating with development teams to streamline the deployment, delivery, and management of software products. Your contributions will directly impact our ability to deliver high-quality software to our users efficiently.

Responsibilities:

• Ensure our AWS cloud based infrastructure is highly available, scalable, reliable, and runs efficiently.
• Design, develop, and maintain automation scripts and pipelines for provisioning, deploying, and managing infrastructure and applications.
• Spearhead our CI/CD efforts, ensuring smooth and efficient delivery pipelines for software releases.
• Embrace the power of IaC tools like Terraform to build and manage infrastructure components.
• Work your magic with Docker and orchestration tools like Kubernetes to manage containers effectively.
• Collaborate with cross-functional teams to ensure DevOps best practices are integrated into our development processes.
• Keep security at the forefront, implementing best practices and security measures throughout the infrastructure.
• Investigate and resolve issues related to deployment, configuration, and system performance.

Requirements:

• 4+ years of experience in a DevOps or similar role.
• Experience with CI/CD tools such as Jenkins, CircleCI, or GitLab CI/CD.
• Proficiency in infrastructure provisioning tools like Terraform.
• Experience with containerization and orchestration tools (Docker, Kubernetes).
• Strong understanding of cloud services (AWS, Azure, or GCP).
• Ability to troubleshoot complex technical issues and provide solutions.
• Excellent communication skills and a knack for collaboration.

To apply

If you are interested in this position, click Apply Now on LinkedIn or please send your resume to [email protected], quoting “DevOps Engineer (SG)” in the subject header.

Responsibilities

• The candidate will be required to perform electrical testing, test data analysis & automation across SiC power and RF/mmWave GaN devices.
• The candidate hands-on characterization work will encompass from low voltage I-V/C-V to high voltage breakdown, switching performances for SiC, and DC & high-frequency characterizations for RF/mmWave regime.
• The candidate must have hands-on experienced in handling Keysight 4156C and B1500A/Keithley K4200 Device Analyzer, B1505A High Power Device Analyzer with N1265A UHC Fixture and Keysight 4284A/4285A and E4908A LCR Meter independently on their own.
• It will be a plus if the candidate has knowledge of instrumentation control using LabView and some other software like Python, C++ etc .
• The candidate is required to have at least some basic semi-conductor knowledges of semi-conductor devices like P-N Junction, Diodes, CMOS etc.
• The candidate can be exposed to process and device design/simulation with commercial TCAD tools (e.g. Silvaco Victory Process and Victory Device, Sentaurus Process and Device, etc) as part of the learning development and eventually be working on wide bandgap devices team.

Qualifications:

• Bachelors / Masters' degree in Electrical Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, Chemistry, Physics or equivalent.
• At least 5 years of relevant experience. Applicants with relevant study (Electronics, Microelectronics, Computer Engineering, etc) can be considered.
• Strong communication, industry awareness, and problem-solving skills.
• Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to "get things done".
• Industry experience is a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

Responsibilities:

· Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)

· Monitor basic equipment/process errors and perform recovery.

· Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.

· Logistically transport wafer lots between equipment within cleanroom and between worksites.

· Identify and address potential areas for improvements such as cycle time, utilization, and cost.

· Perform chemical change/ top-up for equipment under supervision.

· Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.

· The candidate may be required to perform shift work (Mon-Fri).

Job Requirement:

· Nitec or Diploma in Electrical/Mechanical/Chemical Engineering

· Basic understanding on semiconductor process is preferred

· 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

Responsibilities:

· Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)

· Monitor basic equipment/process errors and perform recovery.

· Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.

· Logistically transport wafer lots between equipment within cleanroom and between worksites.

· Identify and address potential areas for improvements such as cycle time, utilization, and cost.

· Perform chemical change/ top-up for equipment under supervision.

· Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.

· The candidate may be required to perform shift work (Mon-Fri).

Job Requirement:

· Diploma in Electrical/Mechanical/Chemical Engineering

· Basic understanding on semiconductor process is preferred

· 3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Position Overview

The Autodesk Connected Delivery Team enables internal and external developers to seamlessly integrate Autodesk solutions across Desktop and the Web. We are seeking a motivated Software Engineer in Test to join us in Singapore and be a part of our journey in building the next-generation platform.

You will be part of a team of diverse, smart, and driven engineers. You will be responsible for architecting, designing, building, owning, and testing various components, services, and frameworks, while collaborating with teams across multiple locations.

Responsibilities

• Develop and automate tests for software validation by setting up test environments and designing test plans for desktop products and cloud services
• Align with team goals that connect to the wider organization goals
• Collaborate cross-geo with teams to influence the architecture and design of software and help bring quality into the design of the product

Minimum Qualifications

• BS or MS in Computer Science or related technical field
• 0-2 years of software engineering experience
• Strong background in programming and software testing
• Strong Python/C++ programming skills
• Ability to multi-task between complex projects
• Strong verbal and written communication skills
• Excellent problem-solving abilities
• Enjoys working collaboratively in a team with high trust
• Experience in developing test automation frameworks on Win, Mac and Linux will be a bonus
• Experience with scrum and agile processes will be a bonus
• Familiarity with secure engineering practices will be a bonus
• Technology stack: C++, JavaScript/Python, Selenium

The Ideal Candidate

• You understand what it takes to build and support business critical desktop clients, components, services, and frameworks
• You have a passion for programming, CI/CD, and automation
• You are customer oriented, and drive towards addressing customer pain points
• You believe in taking initiative, ownership and driving towards high standards

Job Responsibility:

• Managing the assigned modern trade accounts
• Managing and implementation of our new product's objectives
• Managing our product promotion's proposal submission, negotiation and execution
• Liaising and negotiating with supermarket personnel for product's display space and rental and to improve visual merchadising of our products
• Building and strengthening the relationships with buyers, outlet's personnel and relevant parties to ensure smooth operations
• Work closely with Merchandising & Marketing Team and clients for sales and promotion plan of assigned key account
• To develop a career mapping for the Sales Executive / Merchandiser team
• Prepare sales proposals and quotation to customer needs and demands
• Ad-hoc duties assigned by the company

Job Requirements:

• Candidates with experience/skills/knowledge in the FMCG industry and have handled modern trade under supermarkets
• Relevant experience in Supermarket or handling category/buyer roles will be an advantage
• You are willing to travel to assigned locations within Singapore
• Good interpersonal & communication skills
• Proficient in computer skills, including MS Word, Excel & Power Point

Job Description:

• Responsible for supporting yield improvement, driving, and managing the continuous yield and quality improvement for various devices.
• Responsible for having close interaction with Product Test Engineering team and communicate technical product status to management.
• Responsible for following up with Foundries and test subcontractors to resolve low yield/reliability issues.
• Responsible for monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools and understand on semiconductor process knowledge, e.g., inline d0, ET, CPK etc.
• Develops failure analysis methodologies as required for assigned projects to enable rapid problem solving with support of internal and external parties.

Requirements:

• Degree/Master’s in Electrical Engineering, Microelectronics or related discipline.
• Strong analytical problem-solving skills.
• Capability of mass data analysis.
• Min 2 years of experience in Product Engineering.
• Salary package will be offered based on working experience.

Job Description:

The candidate needs to develop efficient algorithms for data collection, data cleaning and transforming raw data into usable format for model training. The candidate is expected to be meticulous, have a good sense of data quality and governance, proficient in scripting and keep good documentation. The candidate is expected to collaborate with scientists and engineers and have good team spirit. Strong problem solving, coding, and communications skills are expected.

Job Requirement:

· BSc/MSc in ML, NLP, background in speech, national language understanding

· Proficient programming skills, familiarity with Linux

· Strong analytical and critical thinking skills, good team player with good communication and interpersonal skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 10th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office) for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects
• Providing premium In-house Banking applications

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

ISAP/ITS Department Overview

ISAP IT Production Centre is an offshore delivery center managing IT Operations (RUN) for Europe and Asia. It constitutes one of two main hubs for CA-CIB IT production teams.

ISAP IT Production Centre is split in 4 departments covering the following aspects:

• Infrastructure Services
• Application Services & Operations
• Middleware Services
• End Users and Transverse Services

The scope of technologies encompasses core infrastructures (Systems, Storage, Network and Security), end user services (Citrix, VDI, and communication services), and applications and associated infrastructure (middleware platforms such as Database, Control-M, MQ, CFT, SharePoint).

Job Summary

• He/She will be a service delivery technical manager for all SAN & Backup services in CA-CIB. As such, he/she is accountable for his/her team to operate & deliver a good level of RUN services to stakeholders & partners and for the technology expertise in his/her scope.
• He/she will provide support and act as the last level of escalation point for all production support activities within the SAN & Backup team in Singapore. He/She is accountable for the overall health and stability of the technical solutions within his/her scope. He/She has to effectively work with technical peers such as architects, peer experts and project teams on technology road maps and projects. He/She will have control over the scope of technical activities, develop best practices, manage knowledge and ensure the necessary trainings are imparted to the team wherever applicable.

The 14-member SAN & Backup team operates the RUN activities and delivers projects for its infrastructure scope covering HPE XP8, XP7 High-End Storages, HPE Primera, 3PAR 8400 Mid-Tier Storages, Dell EMC ISILON, Brocade FC fabrics, synchronous cross-site replication, and Backup platform running Dell EMC Networker and HPE StoreOnce VTL.

Job Detailed Description

A Service Manager has a wide spectrum of responsibilities and actions.

As a Service Manager of his/her team, he/she:

• ensures the IT Production activities in his/her perimeter are rightly performed by his/her team complying with defined norms, standards, processes and procedures,
• is responsible to meet defined KPIs for Request, Incident, Change, Problem and Knowledge Management,
• assigns technical tasks and manages delegation for technical issues,
• animates the team to encourage collaboration and sharing of best practices,
• has a role in supporting technical skills development and provides training when required.
• supports new technologies and leverages them to provide consistency of service across streams,
• manages service improvements for all SAN & Backup services supported throughout the organization,
• documents, reviews, maintains and shares relevant technical information to the team
• provides technical direction, supports services both proactively and reactively to maintain the availability and reliability of system infrastructure in accordance to the SLA,
• implements and develops improvements based on LEAN-CA-CIB best practices,
• focuses on automation and optimum use of the team to improve efficiency,
• drives and delivers root cause for any high severity issue
• reviews technology changes to identify potential risks,
• is responsible for problem management and resolution.

As an experienced professional in SAN & Backup Services, he/she:

• supports his/her team during diagnosis when technical issues rise in his/her scope of expertise,
• is aware of the global IT structure so that he/she anticipates interrelationships within the organization,
• engages with technical peer, Service Managers, Architect and project teams on technology roadmap and projects,
• facilitates transformation projects and suggest future directions for new areas of improvement and change,
• guarantees the production readiness and license to operate of new projects and solutions,
• is available and able to drive technically, any complex or high severity incidents that occur within the scope of their role,
• actively engages to understand new technologies and technology trends and reviews them with a view to incorporating them into CACIB operations,
• actively assist in identifying the most technical skilled candidates for open roles,
• technically coach and develop partner resources to improve quality and productivity,
• defines the technical skillset required to support CA-CIB technologies.

As the escalation point of contact for Clients, he/she:

• manages the daily relationship with Clients including planning, requests clarification, risks mitigation and service quality.

Legal and Regulatory responsibilities, he/she:

• complies with all applicable legal, regulatory and internal Compliance requirements, including, but not limited to, the Singapore Compliance manual and Compliance policies and procedures as issued from time to time; Financial Security requirements, including, but not limited to, the prevention of Financial Crime and Fraud including reporting obligations to the Money Laundering Reporting Officer.
• maintains appropriate knowledge to ensure to be fully qualified to undertake the role.
• completes all mandatory training as required to attain and maintain competence.

Job Specific Environment and/or Organization

• Fluent in English written and spoken
• Working hours primarily to cover Europe business hours
• On-call support can be expected on a rotational basis (weekdays and weekends)

Candidate Profile

Mandatory track record

• Minimum 8-10 years of experience in managing SAN & Backup environment with about 3-5 years of experience in managing a RUN service delivery team of similar scope.
• A Bachelors/Engineering graduate.
• Subject matter expert on technologies – HPE High-End and Mid-Tier Storages, Dell EMC ISILON, Brocade FC fabrics, synchronous cross-site replication.
• Knowledge and working experiences on Backup platform running Dell EMC Networker will be advantageous.
• Well versed with Scripting and Automation (Ansible, Python, Bash).
• Excellent communication, interpersonal and logical skills.
• Customer service oriented and a strong team player.
• Ability to work under pressure and a commitment to solving issues.
• French language proficiency would be seen as an advantage.

Job Description:

The candidate needs to implement deep learning algorithms and propose novel solutions that optimize the computational efficiency for training and inference of foundation model. The candidate is expected to work as a team in problem analysis, design solutioning, conduct evaluation to build state-of-the-art foundational models and develop use cases. Strong problem solving, coding, and communications skills are expected.

Job Requirement:

· BSc/MSc in ML, NLP, background in speech, natural language understanding, multi-modal AI

· Proficient programming skills, familiarity with Linux is a must

· Familiar with different deep learning and LLM training frameworks

· Strong analytical and critical thinking skills, good team player with good communication and interpersonal skills

· Knowledge in ML and Deep learning algorithms, and advanced NLP techniques are necessary

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

The candidate needs to implement deep learning algorithms and propose novel solutions that optimize the computational efficiency for training and inference of foundation model. The candidate is expected to work as a team in problem analysis, design solutioning, conduct evaluation to build state-of-the-art foundational models and develop use cases. Strong problem solving, coding, and communications skills are expected.

Job Requirement:

· BSc/MSc in ML, NLP, background in speech, natural language understanding, multi-modal AI with minimum 8 years of relevant experience

· Proficient programming skills, familiarity with Linux is a must

· Familiar with different deep learning and LLM training frameworks

· Strong analytical and critical thinking skills, good team player with good communication and interpersonal skills

· Knowledge in ML and Deep learning algorithms, and advanced NLP techniques are necessary

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About MyrLabs

MyrLabs is an A*STAR spin-off that creates cutting edge hardware and algorithms. The MyrLabs team consists of driven and multi-disciplinary engineers dedicated to bringing game-breaking solutions for our partners by innovating at the PCB, firmware, and software levels. We work on problems that academia fears to, cannot, or will not address. These are problems that are difficult and require multi-disciplinary efforts. Our approach focuses on the use of non-mainstream techniques to spark creativity and to solve problems in ways that are not seen before.

Job Brief

We are looking to hire Robot Designer Engineers to join our Robotics Team. This is a position for a research-focused role towards designing, building, and prototyping ground wheeled robots. Our roadmap of planned robots includes small robots (200W x 150D x 200H mm) and large robots (1800W x 1200D x 1800H mm). These robots’ purpose is to showcase our work on cutting edge algorithmic capabilities for robots and new design paradigms for robots. Your work will involve the creation of robots from scratch and enclosures that sit atop existing off-the-shelf robot chassis platform.

This is a difficult job role that will require a mix of design, mechanical engineering, and electrical engineering expertise. While we do not demand for you to possess the entire skillset, you must be willing to acquire the missing skillsets over the course of your employment and commit to becoming a multi-disciplinary engineering staff.

MyrLabs’ intends to create robots that defy existing design norms. We are looking for people who are creative and have the passion to create sophisticated mechanical objects.

Responsibilities

1. Work with the Senior Management Team to conceptualize robots that align with the Company’s roadmap and plans

2. Developing new ideas for robots and presenting them to the Senior Management Team

3. Sketch, CAD, and then realise/produce the concept robots

4. Work with other R&D staff to integrate sensors, computers, and other hardware on the robots

Stance on Skills-based Hiring

MyrLabs has pledged support for the skills-based hiring movement; candidates are assessed based on a ‘skills first’ approach over qualifications. Candidates from ITE or Polytechnics are welcome to apply for the position.

Critical Skills

- Demonstratable expertise in using SOLIDWORKS, Fusion 360, NX, or equivalent professional CAD software

- Demonstratable ability to draw, sketch, create, and present conceptual drawings

- Demonstratable expertise in product design, problem solving, and/or creative thinking

Nice to Haves

- Demonstratable expertise in mechanical engineering, electrical engineering, and/or programming

- Demonstratable ability to conduct focus groups and extract requirements

- Demonstratable knowledge of manufacturing standards and practices

- Demonstratable experience in identifying design, production, material and technology market shifts

After application, please send your resume, MBTI profile, and portfolio of previous work or ideas to [email protected]

You can do a free MBTI test at: https://www.16personalities.com/free-personality-test

Role Purpose:

To independently determine and prepare the Requisitions for packages of mechanical

components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Key Accountabilities:

Technical requirements-

Understands the specifications and requirements in the area of mechanical packaged equipment and system (such as

Chemical Injection package, Scrubber, Utility Compressor,Pumps, etc.,) of the assigned package. - Responsible for Mechanical

Design of packaged equipment in compliance with applicable International codes ASME, API etc.,

Engineering document preparation -

Independently develops technical specifications/standards and Requisitions for packaged equipment and system such as

Chemical Injection package, Scrubber, Utility Compressor, Pumps, etc.,

Supplier selection-

Independently evaluates the technical aspects of bids received from suppliers and concludes assessment to the bide. Generally, less

complex packages and middle risk equipment are assigned.

Supplier management -

Assists in placing and executing the orders. After orders, independently reviews Supplier documents (such as data sheets,

drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakes holders.

Support for other discipline -

Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site

Technical issue resolution -

Independently resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post-delivery.

Compliance with HSSEQ policies -

To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behavior.

Qualifications

- Bachelor’s Degree in Engineering

- Minimum 10 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in FPSO, off-shore application

- Possess relevant experience working on EPC projects

- Shall be conversant with design standards and International Industry Codes such as ASME, API, etc.

- Proficency in written and spoken English and Japaneses.

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

This is a new role within our Operations Team where you will be responsible for autonomous vehicle operations in our customer sites where you will be responsible for Remote Vehicle Operations, Maintenance and Systems testing. where you will be cross-deployed to both the testing and operations team. This role will operate on a shift-based schedule. You will play a crucial role in ensuring the safe and efficient operation of autonomous vehicles, monitoring and controlling real-time vehicle operations, conducting general maintenance and executing testing procedures.

On a day to day, you will be collaborating with cross-functional teams while integrating new technologies, troubleshooting technical issues and contributing to continuous improvement initiatives. Your expertise will be vital in the success of maintaining compliance with safety regulations, optimizing vehicle performance, and fostering innovation in autonomous vehicle operations.

Role responsibilities

Vehicle Maintenance and Testing.

• Conduct diagnostics and maintenance on autonomous vehicles.
• Collaborate with engineering teams to integrate new technologies and features into autonomous vehicle systems.
• Execute testing procedures for autonomous vehicle systems in an operational environment.
• Provide technical support to on-site and remote teams during autonomous vehicle operations.
• Troubleshoot and resolve technical issues promptly to minimize downtime.

Operations Control:

• Monitor and control the real-time operations of autonomous vehicles.
• Execute and manage autonomous vehicle operations to ensure safe and efficient performance.
• Respond promptly to system alerts and emergencies, taking corrective actions as necessary.

Shift Operations:

• Work on a shift-based schedule to ensure 24/7 coverage for autonomous vehicle operations.
• Collaborate with cross-functional teams to maintain continuous and reliable system functionality during all shifts.

Safety and Compliance:

• Ensure strict adherence to safety protocols and compliance with regulatory requirements.
• Collaborate with safety and compliance teams to implement and maintain best practices.

Required experience

• Diploma in relevant field or equivalent experience.
• Proven experience in vehicle/transport operations and testing.
• Strong analytical and problem-solving skills.
• Experience with vehicle/transport technologies and systems.
• Hands-on experience in mechanical systems and electrical/electronic wiring
• Hands-on experience with Linux OS environment.
• Knowledge and background in Robotics/Automation.
• Hands-on experience in Bash, Python, C++ and ROS is a plus.
• Possession of a Class 3 Driving licence is a plus.
• Excellent communication and collaboration skills.
• Ability to adapt in a shift-based and 24/7 working environment.

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Responsibilities:

• Provide desktop support at customer’s site. This includes installation, repair, servicing, liaising and maintenance of solutions in accordance with the manufacturer’s specifications, to ensure customer satisfaction and service operation are achieved
• Conduct installations based on customer’s requirements and company specifications, from site inspections through to final sign-off and acceptance
• Diagnose and perform repairs on equipment and solutions and ensure that relevant updates and patches are applied accordingly on-site or remote diagnostic procedures at customer’s sites
• Initiate escalation procedures and follow up on all open requests of allocated sites to ensure customer satisfaction
• First level troubleshooting of network connectivity in a LAN/WAN environment
• Responsible for tracking hardware and software inventory and report to asset management team on a regular basis
• Assist in user/hardware movement and office relocations
• Maintain defective equipment/parts in maintenance inventory, document customer repairs, maintain and restock assigned parts inventory to ensure proper spare parts levels
• Provide user data and application recovery
• Maintain IT records and track on areas of responsibilities

Requirements:

• Diploma in Engineering, Computer Science/Information Technology or its equivalent
• At least 1 year of experience in a technical service role
• Technical skills in Microsoft Windows, desktop hardware, desktop software application and network environments

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The ECE department is looking for candidates to conduct research on microarchitectures that support emerging computing paradigms (i.e., brain-inspired or quantum-inspired computing). The candidates will explore microarchitecture designs that support these emerging computing paradigms using a system-technology co-design approach. Tasks involve the exploration of various design aspects across the devices-circuits-systems-architectures-algorithm stacks.

Qualifications

1. Minimum a Bachelor degree in engineering
2. Preferable to have experience in microarchitecture design and use of EDA tools such as Cadence Virtuoso, HSPICE, etc. Experience in nonvolatile device technologies is a plus.
3. Open to Fixed Term Contract

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational down-time.

As a IT Support Engineer, you will be responsible for the following :-

• Assist the project teams with setting up, installing, and configuring operating systems, applications, and peripheral devices for PCs/Workstations.
• Provide first level on-site IT support to end-users on a 24x7 rotational shift, including weekends and holidays.
• The successful applicants should be prepared to be deployed primarily at Tuas Checkpoint. The successful applicant could be deployed to Tuas checkpoint in future on a rotational basis.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• Experience in installing, configuring, and troubleshooting PC/peripheral devices and providing application maintenance support is necessary.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), KPIs (key-performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

Responsibilities:

• Conduct time and motion studies to identify touch time elements which represent part of manufacturing process across all customer's product models.
• Analyzes data and process to establish the cookbook and compute touch time and non-touch time of each product model through E2E process
• Investigate current processes and drive continuous improvements projects for quality, productivity, and cost effectiveness
• Ensure smooth process flow with high quality, high yield, low cost by working with the respective matric owners to track and achieve the overall committed targets of KPIs
• Work with Senior Engineers to set up process recipes of newly introduced processes or new process equipment or tools.
• Any other ad-hoc duties as assigned in accordance to business needs

Skills and Requirements:

• Diploma/Bachelor’s degree in industrial technology, Manufacturing Engineering Technology, or related field required.
• Minimum 2 years’ experience in manufacturing engineering or relevant field
• Prefer to have Kaizen/Lean manufacturing experiences.
• Excellent in analytical, organizational, and interpersonal skills
• Attention to detail and data accuracy
• Must be a team player and highly motivated.
• Flexibility and ability to change priorities.
• Ability to multi-task with strong sense of urgency; ability to meet deadlines.

OTHER INFO:

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• 
  Working Days / Hours: Normal Shift: 8am - 5.30pm or 8.30am - 6.00pm [Mondays to Fridays]

---------------------------------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

The principal engineer associates in this role, function as information technology (IT) professionals serving as technical experts and participate in or oversee a variety of analytical and technical assignments that provide for problem diagnosis and solutions documentation, implementation, administration, support, and maintenance of a variety of hardware, software, and network products in an information technology infrastructure environment. The role is broadly split between providing day to day operational support for existing infrastructure services and users of those services, and project-based work leading to the development and deployment of new infrastructure services.

Responsibilities

• Provide maintenance and support for the network services
• Experience working in LAN/WAN/WLAN/SDN/SD-WAN/IPS/ISE
• Design, implement, and maintain the organization's network infrastructure, including routers, switches, firewalls, load balancers, and other network components
• Collaborate with cross-functional teams to design network solutions that align with business objectives and ensure scalability, security, and performance
• Configure and optimize network devices to ensure seamless connectivity, data transmission, and network performance
• Troubleshoot and resolve complex network issues, conduct root cause analysis, and implement corrective actions
• Monitor network performance, conduct capacity planning, and implement necessary changes to optimize network performance and ensure high availability
• Implement network security measures, including firewalls, access controls, and monitoring tools, to protect the organization's data and systems
• Maintain accurate and up-to-date network documentation, including network diagrams, configurations, and standard operating procedures
• Stay updated with emerging network technologies, industry trends, and best practices, and make recommendations for continuous improvement
• Develop test cases and conduct proof of concept tests on new software and hardware prior to upgrade/deployment
• Able to perform as the role of Project Lead / Coordinator in project management for small to medium size projects or Service Requests
• Work closely with Project Manager / Service Delivery Manager to fulfil project deliverables and operational request
• Able to establish TAC cases with the principal vendor for complex problem until its resolved
• Able to work independently

• Bachelors degree in computer science, Information Technology, or a related field
• 7 or more years of experience as a Network Engineer, with a focus on designing, implementing, and maintaining complex network infrastructures
• Strong knowledge of network protocols, and advanced in routing protocols such as (BGP, OSPF)
• Proficient in configuring and troubleshooting various network devices
• Knowledge of advanced multicast routing and QOS is a plus
• Experience with network security technologies, including firewalls, IDS/IPS, NAC, Web proxy and VPN technologies
• Relevant network certifications such as CCNP. CCIE is a plus
• Solid understanding of network monitoring tools and protocols
• Experience with Software Define Network technologies such as Cisco ACI is a plus
• Strong analytical and problem-solving skills, with the ability to diagnose and resolve complex network issues
• Excellent communication and collaboration skills to work effectively with cross-functional teams and stakeholders

JOB DESCRIPTION:

• Control FPSO TOPSIDE engineering work including Detail Engineering Subcontractors, EPC package supplier, and supplier documents.
• Prepare and keep detail Engineering Procurement Construction Integration (EPCI) schedule for topside in FPSO project.
• Overall responsibility for all project activities under assigned scope management of discipline in engineering, procurement and construction Integration.
• Coordinate and follow up with design disciplines with emphasis on flow of inputs between design disciplines and highlight critical problems to head of disciplines and engineering managers.
• Review project/technical specifications for FPSO topside engineering.
• Manage detail engineering subcontractor’s quality and schedule during FPSO topside detail engineering stage.
• Support to establishing project control systems for the project schedule and cost. This includes development of the project baselines.
• Assist Project Manager and Project Control Manager to prepare the job execution plan in the parts related with engineering schedule, budget and resource planning.
• Set-up and maintenance of control work includes - scope monitoring (scope of works and supply in the Contract and those in the agreements among Joint Venture/Consortium, Sub-contractors), change order management, Overall Schedule Management, Risk Management (Risk identifications, monitoring and mitigation), Project Reporting.
• Set-up and maintenance of Letter Management System and Electronic Document Management System includes – establishing information exchange flow and document exchange flow among Joint Venture/Consortium, Vendor and Sub-contractor.
• Hold, manage and attend regular (weekly, monthly, progress) and key meetings within Project and with other engineering design disciplines to understand design issues and work out satisfactory solutions.
• Develop and coordinate the reporting system and reflect to the project.

JOB REQUIREMENT:

• Bachelor’s degree in department of Chemical Engineering.
• Minimum 6 years of working experiences in project management department for engineering company.
• At least a 1 year of working experiences in FPSO related project.
• At least 2 years of working experience as Project engineer in design office and construction site for Power Plant Project.
• Willing to travel and/or station in module fabrication yard, structure pre-fabrication shop, detail engineering subcontractor’s office as project engineer.
• Familiar and aware of collaboration between inter-discipline engineering activities with proactive mind.
• Familiar with scheduling software such as MS Project.
• Must be familiar with Electronic Document Management System such as TeamBinder.
• Familiar with material control system such as SPMat.

This role involves a blend of technical expertise, customer service, and sales support, ensuring optimal use of our ITCH operations.

Key Responsibilities:

- Client Support: Assist clients in understanding and utilizing data from ITCH operations.

- Address any queries or issues, ensuring a high level of customer satisfaction.

- Optimization of ITCH Operations: Guide clients in enhancing the efficiency and effectiveness of ITCH operations.

- Claims and Warranty Assistance: Provide support in the event of claims and manage warranty-related issues.

- Technical Demonstrations: Conduct on-site demonstrations of equipment for crew members when ships are in port.

- Onboard Trials: Join ships on voyages to demonstrate the ITCH system in action, showcasing its features and benefits.

- Sales Support: To assist the regional sales director and colleagues with sales-related activities to drive regional growth, when not engaged in the above activities.

Qualifications:

- At least 1 to 2 years in operational roles within Maritime / Shipping industries. Ex ship-cadets are welcome to apply.

- Professional technical maritime certificates, or Diploma in Marine Engineering.

- Technical proficiency, with the ability to understand and operate equipment.

- Strong problem-solving and customer service skills.Willingness to travel, including joining ships for voyages.

- Good communication and presentation skills.

- Collaborative mindset, able to work closely with the sales team.

- Benefits:Opportunity to be a part of a dynamic and innovative team.

- Exposure to diverse regions and maritime operations.

- Competitive salary and benefits package.

Employment Type
Full-time

Edit job description

What You Will Do:

• Under the supervision of an experienced engineer or engineering manager, performs detailed engineering review of plans as assigned for compliance with applicable Rules, Regulations and contract commitments.
• Performs work which involves conventional engineering practices but may include moderately complex problems such as the resolution of conflicting design requirements, material standards or coordination of activities among other disciplines.
• Drafts technically accurate and timely reports, and responses to client letters, faxes and other forms of communication for review by an experienced engineer or engineering manager.
• Prepares accurate and timely weekly reports and billing on all work performed.
• Communicates the status of the current workload to all appropriate members of the team to ensure the needs of the clients will be met.
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Works as a team member within the group. May work autonomously, once trained, with minimal supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering, Marine, Mechanical, or Electrical Engineering, or other related disciplines; an M.S. is preferred.
• Graduate from University and a minimum of five (5) years of related industry experience.
• Preference for graduates from a marine-industry-recognized college or university.
• Experience in international business and technical processes, as well as international requirements and problem resolution, is necessary.
• International experience or knowledge of international business and related technical processes, requirements, and problem-solving skills.

For those with Hull backgrounds

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering or other related disciplines; an M.S. may be preferred.
• Demonstrated computer literacy in engineering software.
• Exposed to Finite Element Method (course work or supervised research).
• For those with seven (7) years or less Machinery backgrounds or experience
• B.S. degree in Marine, Mechanical or Electrical Engineering or other related disciplines.

For those with Machinery backgrounds

• Seven (7) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society or
• Seagoing engineering license or professional/chartered engineer license and four (4) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others.
• Familiarity with the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).