JOB SCOPE

Responsible for executing the company projects in mechanical & electrical works in building construction which covers:

• Review project specifications and technical clarifications
• Prepare method statements and check drawing discrepancies
• Carry out project planning, design, material requisition, cost control, project supervision and documentation
• Supervise the M & E works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Ensure timely and smooth progress of works
• Ensure quality of works is achieved and safety & environmental regulations are complied with
• Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions
• Work closely with the clients, consultants, and subcontractors on technical and drawing matters
• To lead the site M&E construction team in ensuring smooth execution of work by subcontractors
• Carry out inspection of MEP works prior to concreting or subsequent construction works
• Compliance with all necessary standards, codes of practice, and safety regulations
• Oversee all related M&E issues on site

JOB REQUIREMENTS

• Minimum 3 years of experience as M&E Engineer in construction related field
• Possess a degree from universities in mechanical or electrical engineering, recognized by the Professional Engineer Board to be overall in charge of all M&E trades
• Use of Autocad/BIM Revit would be an advantage
• Proficient in using Microsoft Office
• Good communicative skills, able to interact with people of all levels and teamwork
• Contract basis
• 5.5 days working week
• Project site located at Tuas

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

• Salary up $4500
• Location: Tai Seng
• 5 Days work week

Responsibilities:

• Oversee drawing management and control of technical documentation
• Assist project manager in planning and execution of project plans at site
• To understand and design electrical drawing and single line drawings
• Carrying out tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementing preventative maintenance procedures
• Preparing service & Site Progress Reports

Requirements:

• Diploma in Engineering or equivalent
• Min 2 years of working experience in construction industry
• Knowledge in PLC is must
• Knowledge in Hydraulic System Control will be an added advantage

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1222284 | Kelvin Soh

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

We are developing and executing a shared strategic vision for Loyalty & Marketing Services platforms and products that enable Visa to be the world-leading data-driven payments company. As a Data Engineer, you will be part of world-class team of Engineers to define, drive and execute on this vision. We are looking for a self-motivated individual with software engineering skills and expertise with Java, Web technologies & Big data. The candidate will be extensively involved in hands-on activities including POCs, design, development, testing, and documentation. Candidate must be flexible and willing to switch tasks based on team's needs.

Primary responsibilities will include:

• Design and develop mission-critical systems, delivering high-availability and performance
• Work on development of new products and enhancements to existing systems iteratively by building quick POCs and converting ideas into real products
• Work closely with architects, business and technical stakeholders to develop high quality products and services that meet business requirements and expectations while applying the latest available tools and technology
• Instill best practices for software development, and deliver high quality work on tight schedules
• Identify opportunities for further enhancements and refinements to standards and processes
• Mentor junior team members, develop departmental procedures and best practices standards
• Coordinate Continuous Integration activities, testing automation frameworks, and other related items in addition to contributing core product code
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Responsibilities:

• Develop and design engineering plans and construction documents for projects.
• Conduct site inspections and assessments to ensure project feasibility and adherence to regulatory standards.
• Perform calculations to assess structural integrity, safety, and sustainability.
• Manage project timelines, budgets, and resources, collaborating with contractors and local authorities.
• Oversee and provide guidance during the construction phase to ensure quality and compliance with designs and plans.
• Monitor environmental impact and ensure all designs are sustainable and eco-friendly.
• Update project records and ensure that all documentation is accurate and up to date.

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Customer support is seeking a field service engineer for supporting our regional as well as worldwide customers. The ideal candidate is one having experience on both Integrated Control Monitoring System (ICMS) as well as propulsion/steering control systems. Hands-on service or operational experience on the main engine and thrusters is an added advantage.

The role also involves providing the onboard services, commissioning of refit and retrofit projects, remote guidance/product support to our customers as well as being part of a knowledge pool giving backend support for the field service team.

Responsibilities:

• Focus on customer support, commissioning and service on assigned Kongsberg Maritime Merchant & Automation product range
• Cover service activities in South East Asia and maintain good relationship with existing clients
• Workshop test and technical preparations
• Proper preparation and execution of work assigned and ensure performance are met at all times
• Responsible for generation of service reports, update drawings, cable information database and other relevant documents
• Provides remote guidance / product support to customers, commission and project management of refit/retrofit projects and backend support to the service team
• Assist our sales department with technical issues
• Handles pre and post administrative work
• Required to undertake ad-hoc duties which may be assigned from time to time.

Requirements

• Minimum Diploma or Degree in Electronics /Electrical/ Instrumentation
• Minimum 3 to 5 years of related field experience in Alarm Monitoring and Control System as well as the good knowledge of computer hardware/peripherals and basic software’s
• Experience onboard ship for automation systems (controls and propulsion), system process knowledge, distributed control systems and power management
• Relevant working experience in maritime industry
• Must have excellent co-operative skills, good communication skills, result-oriented, self-motivated and the project-management skill
• Meticulous & methodical approach to remote case handling
• Self-driven attitude to find solutions to problems.
• Passion and patience for handling customers – Service oriented
• Ability to work independently
• Able to travel overseas on short notice
• Pay package will be commensurate with experience

Description of the Role:

The Service Sales / Project executive / Engineer MUST at all times maintain confidentiality of all prices and plans and SHALL NOT disclose confidential information without the approval of the Senior Manager and or management.

Key Tasks:

· To assist the Sales / Service Manager / Assistant Manager in developing, review, and execute service sales plans to generate new business with new accounts.

· To follow up on any request for site visit and capture ALL necessary information related to follow up on the sales / tender.

· Conduct cold calls, site visits and customer integration.

· Provide quotations and submit proposals to customers on a timely basis.

· To carry out costing for review of profitability of each customer’s account and develop plans to improve margins. (Have to understand the market trends)

· To follow up on the sales strategy – collaborate in the setting & delivery of business plans to achieve sales targets.

· Follow-up on all sales inquiries, tender and RFQ.

· Ensure that all customer issues relating to customer service, service recovery and credit control are coordinated and update the Sales Manager / Assistant Sales Manager

· Prospecting and developing business across country.

· Analyse competition landscape, market trends and customers’ expectations and plan for strategic and tactical actions.

· “One Face to the Customer “over the entire Service Sales & Execution timeline. This includes all pre sales activities including contract signature until final Servicing and customer handover of generator set

· Coordinates with the purchasing team and the needed supply chain, lead times and cost for project relevant key components that need to be sourced locally. Updating the database regularly to ensure that ALL information on parts/materials and customer’s information.

· To follow up on ALL requirements on documentations submission when running projects / submission of tenders and have them updated.

· Coordinate with the operations team when required on issues for follow up

To follow up as directed and coordinate all post sales activities as part of the maintenance schedule plan, which starts from

Requirements:

Education

· Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in any field.

Knowledge / Experience / Others

· At least 1 years of working experience in Power Generation industry.

· Successful previous experience as a sales representative or sales manager, consistently meeting or exceeding targets.

· Demonstrate ability to communicate, present and influence credibly and effectively at all levels of the organization.

· Possess strong hunter mentality, business sense and industry expertise.

· Personal competencies.

· Driving license is preferable.

· Excellent communication, sales, and customer service skills.

• Prepare and issue quotations for ACMV / HVAC service maintenance & new project jobs.
• Update GP on jobs billing details and prepare all documents for billing submission.
• Update / Issue project code for all service and new project jobs.
• Actively liaise with client representatives for any concerns on the service or project jobs and constantly follow-up on purchase orders as required.
• Constantly coordinate with Project Supervisor on new projects awarded and other clients’ concerns needed to be addressed.
• Economically source spare parts and other materials needed for all service or project jobs.
• Prepare daily sales and monthly quotations reports.
• Prepare tender documents for new projects.
• Issue delivery order or service chits.
• Shipment booking, coordination and preparation of required documents.
• Monitor disposal of empty cylinder stocks and order replenishment as needed.
• NEA reporting as required.
• Update of General Waste Report.
• Data entry of collection note / disposal cylinder and preparation of reports & certificates accordingly.
• Monthly update on refrigerant price to customer and follow-up on new order or price feedback.
• Generate and issue purchase orders to vendors as required.
• Answer main line phone calls.

We are a forward-thinking GPU DEPIN (Decentralized Physical Infrastructure Network) company focused on revolutionizing decentralized infrastructure for AI. Our mission is to build secure, scalable, and accessible compute resources to support the growth of AI in a decentralized ecosystem.

We are seeking a Lead Blockchain Engineer with extensive experience in designing and implementing large public blockchain networks. This role will take ownership of our blockchain architecture and play a critical role in shaping the underlying protocols that drive our decentralized infrastructure. As a lead, you will guide our team in building a resilient, secure, and scalable network.

• Lead the end-to-end development of our public blockchain network, from design through to deployment.
• Architect scalable and secure solutions, establishing protocols and consensus mechanisms for robust network performance.
• Collaborate with cross-functional teams to integrate blockchain capabilities seamlessly within our decentralized systems.
• Provide technical leadership, mentorship, and direction to the blockchain engineering team, fostering a culture of innovation and excellence.
• Stay ahead of industry trends to ensure our infrastructure remains at the forefront of decentralized and blockchain technology.

• Bachelor’s or Master’s degree in Computer Science, Blockchain Technology, or a related field.
• Proven experience in a lead role, with a successful track record in developing and scaling large public blockchain networks.
• In-depth knowledge of blockchain protocols, consensus algorithms, and cryptographic principles.
• Strong leadership skills, with the ability to inspire, mentor, and drive engineering teams toward successful project outcomes.
• Excellent problem-solving and analytical skills, particularly with a focus on security, performance, and scalability

• Competitive compensation, including tokens and performance bonuses
• A remote-first work culture with flexible scheduling
• Unparalleled growth opportunities in an emerging tech domain
• A collaborative, forward-thinking team environment focused on innovation and impact

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 5+ years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 8 years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Controls COE is Looking for You

Halliburton invites qualified candidates to apply for a position with the Advanced Controls Center of Excellence (COE) in Singapore. Candidates with interests and background in control systems theory, robotics, mechatronics, dynamic modeling, or data analytics and machine learning are encouraged to apply. This position provides an opportunity to participate in a strategic research and development program shaping the industry’s future technology. By solving challenging technical problems you can have a rapid impact on a commercial market with significant revenue. Successful candidates are expected to perform original and relevant research and development to expand the group’s expertise and technology portfolio. The Advanced Controls COE at Halliburton encourages a culture of continued learning, inventing, and innovating by bringing together a diverse group of top-notch engineers and researchers. The group has a track record of developing advanced control and smart systems that are used to produce value around the world every day. Our goal is to continuously grow the group’s core research expertise in the area of control, robotics, dynamic modeling, filtering, data analytics, and machine learning to build advanced automation and control technologies and maximize the value of data to ensure the long-term success of Halliburton.

Responsibilities

• Conducting research and development in modeling, control, and data analytics for solving challenging problems in the oil & gas industry
• Contributing to the identification of high value problems and opportunities
• Participating in control system design, control system prototyping, and implementation
• Design smart systems to augment complex tasks
• Collaborating with team members and providing necessary support for technology transfer
• Publishing results in patent applications, technical journals, and conferences

Required Education and Skills

• A PhD (or equivalent experience) from Mechanical Engineering, Aerospace Engineering, Computer Science, Chemical Engineering, or Electrical Engineering with a focus on Control Theory and Applications, Robotics, Mechatronics, Machine Learning, or Data Analytics.
• Skills typically acquired through the completion of an undergraduate degree in Science, Engineering or similar discipline, and 2 years of related experience. Completion of a masters or PHD in Science or Engineering is preferred
• Experience and strong interest in solving practical problems, from invention to implementation in the field
• An excellent publication and patent record consistent with experience.
• Extensive knowledge in control theory, such as modern control, adaptive control, robust control, nonlinear control, optimal control, Model Predictive Control, etc., with outstanding ability to identify the proper control method for solving practical control problems and, when necessary, to develop new control methods, and/or
• Extensive knowledge and practical experience in the application of Data Analytics including machine learning techniques such as SVM, Neuro Network, Bayes network, Genetic Algorithms, etc., preferably with control applications, and/or
• Knowledge of robotic systems with high DoF control, path planning, mechatronics, or dynamic modeling of complex systems
• Demonstrated teamwork, strong communication skills, and collaborative in complex engineering projects

Preferred Experiences

• Worked with large data sets, unstructured data, structured data and supporting compute/cloud systems like Microsoft Azure
• Built tools/workflows and support structures needed to analyze data, perform data cleaning, execute feature detection and extract business value from data
• Developed models, control algorithms, workflows, & software for use in field operations.
• Leveraged data visualization software applications, such as R, Power BI, Spotfire or Tableau

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher-level roles give (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available

Job Summary:

Popular Halal Thai Steamboat family restaurant near Jurong East MRT Station is looking for Service Crews to help up with daily operations.

Jobs Benefits:

• Incentives for Good Sales
• Annual leave / Medical leave entitlement

Job Descriptions:

• Able to work on weekends
• Able to interact with customers, colleagues and restaurant owner
• Ensure good overall cleanliness of the restaurant
• Operate POS/ Cashiering system
• Join the Halal Team to enforce right practice in the restaurant
• Able to speak English/Malay
• Serving food and drinks to customers
• 6 days work
• 7-10 hours a day

· Coordinate with precast supplier on technical details assistance.

· Checking & submitting shop drawings to QPS/LTA for approval..

· Preparing MSRA for all work activity to be done at site.

· Monitor, planning & supervise setting up of precast storage yard.

· Monitor & supervise erection of gantry cranes at precast yard.

· Preparing the schedule for production based on site's delivery requirement.

· Checking & maintaining quality of PC production.

· Planning and scheduling of site works for PC installation.

· Monitoring storage space for precast deliveries.

· Checking quality of delivered products before installation

· Directed all necessary day to day Site activities.

· Monitoring work progress.

· Administration of all site works.

· Quality analysis and control of works.

.

Responsibilities:

• Supervise design schedule, estimates and drawing updates
• Control of all design & engineering documents
• Review of tolerances and constraints on new products prior to estimation
• Continuous development of cost saving activities
• Allocate and monitor schedules quality and cost for subcontracted design & tooling
• Support the Sales dept on design-related function
• Involve in all tooling designs & pre-sale activities (Prototype & quotation)
• Ensure tooling meet the production requirements
• Make tooling improvement to meet higher productivity

Requirements:

• Degree in Mechanical Engineering or equivalent
• 3-5 years hands on experience in precision metal stamping process/multi-slide forming
• Competent in tool design and conversant with CAD and geometric tolerance
• Meticulous and detail-oriented
• Able to prioritize workload and meet deadlines
• Team-player, self driven and able to work under pressure with a sense of urgency and meet tight deadline

Experience with injection molding, double disc grinding, and machining is an added advantage

Job Responsibilities

• Sales and marketing of valves (Own and well known brand in the industry)Able to secure & generate sales of valves & Actuators to achieve company order targets
• Aggressive PIC for Sales Division who can develop new business(sales) from scratch & be able to conclude orders.
• Establish relationship with End Users, Contractor (Industrial Market, main Market is semiconductor, & petrochemical related) who use valves, gathering market information and expand sales
• Market survey of new business field and reporting
• Work closely and liaise with related divisions such as Sales Team, Warehouse, Engineering, Factories, Japan head office
• Properly understand the needs from customers and follow upongoing project
• Person in charge to communicate with customers if a claim occurs, and liaise with related divisions to solve the problem
• A highly dedicated, responsible & passionate person who can perform task accurately & promptly, and able to work under pressure by taking challenge.
• Ad-hoc duties by MD or GM.

Requirements

• Minimum 2 years’ experience related valves, actuators & similar industry in sales including planning sales approach
• Proactive attitude to analyze the current situation and change to better way
• Depending on the performance, this position could be the future Senior Manager
• Proactive attitude to hit the target and logical way of thinking, and to develop new business and sales channel
• Confident in communication
• General Skill in Excel, Word and Power Point
• Team Player
• Ownership
• Decisive, drive and ability to deliver effective, innovative solutions
• A person who has positive and can think and act for himself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication andinterpersonal skills at all levels
• Some understanding of Japanese is a plus.

Reporting Function

• Directly report to Sales General Manager