About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentaryvalidation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum 3 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

Organisation Context

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the TopSKY-ATC (HE) product.

Role Description

In this role you will work in an international multidisciplinary team focused on the Verification and Validation of the TopSKY HE product in order to confirm compliance to requirements and the fitness for purpose in accordance with Operational Scenarios. You will be responsible for the design and execution of the procedures and scenarios.

Responsibilities

• Verification of the solution to confirm the system’s compliance to the Functional Baseline requirements
• Validation of the solution to confirm the system’s fitness for purpose in accordance with the Operational Concepts.
• Contribute in System Requirement Analysis activities to confirm requirements are testable and allocate a Verification Method(s) and Verification Phase(s), documented in the Verification Cross Reference Matrix (VCRM).
• Proactively participate in PI planning and backlog refinement including contributing to the effort estimation
• Conduct of the verification and validation tests in accordance with the Project Plan(s) and Project Schedule at the program’s relevant location (Thales ’premises, supplier premises and/or customer premises)
• Conduct of verification and validation tests during formal testing activities Acceptance Verification and Validation (AV&V) with the Customer.
• Communicate with both internal and external stakeholders for the V&V testing activities.
• Participate in System Requirement Analysis workshops, internally, with suppliers and with the Customer.
• Participate in Test Procedure Reviews and Test Readiness Reviews, internally, with suppliers and with the Customer.
• Report regularly on the progress of the testing activity against the agreed planning and budget
• Record the test results in the project Test Management System and any defects in the Defect Management System.
• Contribute to the Defect CCB by providing summary defect status and impact assessments
• Track and verify and validate defect corrections including regression testing.
• Maintain and retest test procedures as requirements are changed
• Produce Test Procedure Books and Test Reports.

· Support your Squad members (software, integration and verification)

· Support the Product Owner (PO) and Scrum Master (SM)

o Make recommendations on strategies to improve performance or productivity

o Identify risks, and proposing effective solution early and executing mitigation actions

o Provide input into the planning and coordination of program integration activities

• Contribute to the development of Policies, Processes and Procedures for the V&V activities best practice
• Leading Technical Working groups both internally and externally to define technical solutions
• Mentoring and support to all personnel involved in V&V activities, and contribute to succession plans for key V&V roles.
• Contribute to the development of V&V Engineering estimates for any modification proposals to the baseline in the context of projects/bids
• Work in accordance with the defined Thales processes and practices, and contribute to their improvement.

Knowledge, Skills & Experience

Qualifications

• Degree in Engineering, Computer Science or related discipline

Essential Experience

· Test Engineering / Test Analyst experience of large, complex, real time software based systems (5+ years)

· Experience in Air Traffic Management Verification and Validation Scenario design and execution

· ATM experience in the following areas:

o Airspace

o Coordination

o ATM HMI

o Interpartition

o Adaptation/Configuration

· Experience with Air Traffic Management standards eg. ICAO, Eurocontrol, AID

· Application of domain knowledge to high value complex design, development and integration projects.

· Proven experience in conducting objective reviews of verification and validation artefacts

· Proven problem identification and analysis skills and system requirements analysis skills

· Experience in working in a multi-disciplinary integrated team environment

· A positive attitude combined with excellent interpersonal and motivational skills.

· Sound judgement and independent decision-making capability where necessary

· Excellent written and oral communication skills in English

Desirable:

· Experience in Air Traffic Management Operations

· Experience in System Engineering tools eg. DOORs, Jira

· Experience in Verification and Validation Tools eg. Vivaldi, Jira

· Experience in working in a Scaled Agile Framework (SAFe)

· International Software Testing Qualification Board (ISTQB)

· Advanced Test Analyst CTAL-TA Certification

· French Literacy

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

We are seeking talents who are motivated and analytical to join our team. We are working on an enterprise level IoT with ML model for one of the largest operator groups in the Singapore healthcare industry. This internship provides practical experience in IoT system, data analysis, machine learning, algorithms in a nascent healthcare application.

Primary Responsibility

• Working with software programmers to monitor progress and testing criteria.

• Perform edge device coding and de-bugging as necessary.

• Perform data analytics.

• Monitor system testing and project milestones.

• Monitor user requirements and software changes.

• Assist in IoT sensors and hardware testing.

Requirement

• Diploma or Degree with EE or software engineering.

Preferably familiar with IoT and cloud architecture.

• Ability to handle system integrated testing.

• Must have interest in a total system development.

• Problem solving skillset is a must.

Benefits

• Work in a dynamic pace and product rich environment.

• Able to work with and experience best-of-breed software design and implement experts.

• Abundance of deep-tech learning experience.

Job Title: Field Service Engineer (Manufacturing & Repairing Company) ID9125
Location: Tuas
Working Hours: Mon-Fri 900am-600pm; Occasionally Saturday until 12pm
Basic Salary: $3800-$4200

Benefit:
*14 days AL starting with bonus and AWS

Job Description:
•Carry out site installation assistance, start-up, testing and commissioning of compressor and dryer units.
•Troubleshooting and preventive maintenance of air compressors and refrigeration dryers and equipment in relation to mechanical, electrical and pneumatic system.
•To attend service calls and routine servicing at customer site as well as to assist in supervision of production process with minimum breakdown occurrence.
•To prepare and submit repair and maintenance quotations pertaining to service and spare parts sales.
•To plan and coordinate individual service jobs weekly and daily.
•To conduct technical training to customers as necessary.

Requirement:
•At least 2 Year(s) of working experience in the air compressor service experience with class 3 driving license

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Position Summary

The Customer Service Specialist is responsible for providing excellent customer service experience. This role will have frequent interactions and close collaborations with internal stakeholders such as Account team and the Operational teams.

Key Responsibilities

• Build strong relationships with customers.
• Monthly commitment of 6- or 12months rolling forecast back to customer
• Work with internal teams and customer on the customer order planning and execution by

I. Providing visibility for incoming wafers.

II. Providing instruction to execute orders and coordinate the priorities of orders.

III. Providing WIP status, ship-out plan and finished good information to customers.

IV. Arrangement of customer wafers to fulfill Forecast / AOP/Customer Shipment requirement.

• Maintain pricing and sales order creation for billing and shipment.
• Brief internal team on changes in flow / process / customer requirements after understanding customers' specs.
• Co-ordinate any customer returned materials and work with the relevant department on material disposition.
• Attend to customer enquiries and complaints.
• Work with IT to develop reports as per customer’s requirement and maintain the quality of these reports.
• Host Customer Visits and Quarterly Business Review meetings
• Perform any other tasks relevant to support Customer’s requirements.
• Perform any other duties assigned by Supervisor or Manager from time to time.

Requirement

• Degree in Engineering, Business Administration, Marketing Management or similar discipline.
• At least 3 years of work experience in semiconductor industry or OSAT.
• Able to bridge between and coordinate with customer and internal engineering, logistics, sales & planning team.
• Possess strong analyzing, problem solving, communication and interpersonal skills.
• Ability to work under pressure in a very dynamic environment.

Job Title: Plastic Engineer(ID3419)
Location: Changi
Working Hours: Mon – Fri 7 Am To 4:30pm
Salary: $4000-$5000

Responsibilities:
• Utilize expert knowledge of plastic materials (e.g., polypro, PVC, PET, PPS, Vespel, Torlon, etc.) to select the most suitable materials for specific applications.
• Oversee equipment selection and optimization for plastic manufacturing processes.
• Develop and implement plastic manufacturing procedures, including machining, welding, stress relief, inspection, and finishing, ensuring high precision and quality standards.
• Collaborate with cross-functional teams to design and engineer plastic components that meet client specifications and industry standards.
• Conduct thorough quality inspections throughout the manufacturing process to ensure compliance with industry regulations and customer requirements.
• Stay updated on industry advancements, trends, and regulations related to plastics manufacturing and incorporate best practices into our processes.
• Obtain and maintain relevant industry certifications to ensure compliance and credibility in the semiconductor manufacturing sector.

Requirements:
• Bachelor's degree in Engineering or a related field.
• More than 5 years experience in plastics manufacturing, with a focus on precision components for semiconductor equipment.
• Expert knowledge of plastic materials, properties, and applications, including polypro, PVC, PET, PPS, Vespel, Torlon, etc.
• Proven track record of successfully managing all aspects of plastics manufacturing processes, from material selection to final inspection and finishing.
• Strong understanding of equipment selection and optimization for plastic manufacturing.
• Experience in developing and implementing plastic manufacturing procedures, including machining, welding, stress relief, inspection, and finishing.
• Familiarity with industry certifications and standards relevant to plastics manufacturing for the semiconductor industry.
• Excellent problem-solving skills and attention to detail.
• Effective communication and teamwork abilities.

NetVirta is a fast growing, venture-backed startup in the fashion fit technology space. If you’ve had difficulty shopping online because you couldn’t find clothing or footwear that fit, you’ve experienced the problem we address. It’s an issue that troubles shoppers around the world and NetVirta is uniquely positioned to solve it.

Founded by two MIT graduates and located in Boston and Singapore, NetVirta is the world’s leading fit technology provider for medical, retail and sports equipment brands, helping customers order the right size with precision 3D body scanning. We began serving the medical industry in 2013, helping doctors scan medical patients to create custom-fit orthotics and prosthetics. In 2017, we expanded to enable NFL and NCAA football players to obtain custom-fit helmets. Fast forward to 2022, NetVirta’s closed deals with multiple clothing and footwear brands in North America, Europe, and Asia.

We are proud to be certified as Great Place to Work® in Singapore.

What can you expect?

We are seeking a Machine Learning Engineer / Researcher who will lead the development and deployment of advanced machine learning models to power our recommendation system and search engine. In this role, you will have opportunities to work with state-of-the-art AI techniques, including large language and vision models, integrating them to complement our recommendation system and search architecture. You will also play a vital role in maintaining and evolving our AI systems throughout the different growth stages.

Responsibilities

• Build scalable recommendation and search engines tailored to fashion content.
• Lead the design, development, and optimization of machine learning models, especially in the context of fashion recommendation systems and search engines.
• Integrate various techniques to help tackle cold start problems, including

1. Content-based recommendation
2. Leveraging implicit user interaction signals
3. Large language (vision) models

Required Skills & Experience

• Bachelor’s, Master’s or PhD degree in Machine Learning, Computer Science, or a related field.
• Experience with Python and machine learning frameworks (eg., TensorFlow, PyTorch).
• Prior hands-on experience with recommendation & search systems and knowledge of its key components (retrieval, re-ranking, cold-start, etc).
• Familiarity with using large language models and computer vision techniques.
• Ability to collaborate in a fast-paced, cross-functional environment with strong communication and teamwork skills.

Good-to-Have

• Knowledge of reinforcement learning (e.g. multi-armed bandits and related techniques).
• Prior industry experience with A/B tests in the context of recommendation systems.
• Good understanding of the infrastructure behind large-scale recommendation and search systems.

What else is awaiting you?

• Career development opportunities, like mentoring, career exploration through a Japanese concept called Ikigai.
• Learning is fundamental to our culture, your growth together with Netvirta's are paramount to how we can transform the industry.
• Besides hard work, we value your well-being and want you to have fun too! Attractive compensation and benefits as well as engagement and welfare activities awaits you.
• Work alongside with friendly colleagues in a positive environment.

Job Title: Project Engineer (ID3411)
Location: Kaki Bukit
Working Hours: Mon-Fri 8:30am – 5:30pm
Salary: $3000-$4500

JOB RESPONSIBILITIES
1) Assist Project manager in overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and details work programmed.
2) Provide guidance to supervisor in relation to building works, ensure work progress according to schedule and site inspection are carried out on time.
3) Organized resources and work out the allocation of tasks to work teams and sub-contractors
4) Assist the PM with on and off site meetings pertaining to technical issues.

REQUIREMENTS
1) Diploma / Degree in relevant Building / Mechanical Engineering
2) Minimum 2 years working experience in construction M & E or ACMV Projects.
3) Remuneration will commensurate with qualifications and experience
4) Possess Driving license and Own Vehicle (Car Allowance provide)

• Install, upgrade, support and troubleshoot Windows 7, Windows 8.1, Windows 10 and Microsoft Office
• Dealing with hardware and application support queries and issues reported to the support desk and escalated to the Desktop Support Engineers
• Provide user data and application recovery
• Providing Remotely support.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software
• Use tools and methodologies to load, copy and customize operating system configurations for deployment
• Responsible for tracking hardware and software inventory
• Familiarize end users on basic software, hardware and peripheral device operation
• Take ownership and responsibility of queries, issues and problems assigned to the Desktop Support Engineers
• Works with vendor support contacts to resolve technical issues within the desktop environment
• Escalate issues and involve experts wherever required in order to resolve issues as quickly as possible and any other authorized desktop applications & Microsoft or related security patches/Policies
• Install, upgrade, support and troubleshoot for printers, computer hardware and any other authorized peripheral equipment
• Performs general preventative maintenance tasks on computers, laptops, printers and any other authorized peripheral equipment
• Performs remedial repairs on computers, laptops, printers and any other authorized peripheral equipment
• Customize desktop hardware to meet user specifications and site standards
• Provide VIP support (When required)
• Resolve and update incidents with in SLA and also update stakeholders for P1 cases

Ideally you have

• Min. O-levels or NITEC / Diploma / Degree in Computer Science, Information Technology, Infrastructure Support or related field.
• All candidates with Desktop / IT Support experience (Minimum 6 months of working or internship exp.) or those with related knowledge are all welcome to apply!

The C&Q Engineer is responsible for Commissioning & Qualification (C&Q) of equipment/system. All C&Q activities are carried out according to site SOPs and the current version of GMP (Good Manufacturing Practice).

The responsibilities of the C&Q Engineer include:

• Ensure 95% training completion at all times

• Already possess knowledge & skills to use Kaye Validator AVS and Data Logger for Temperature Mapping

• Drafting of all required Commissioning & Qualification Deliverables (e.g GMP-FRA, Concept Paper, Qualification Plan, Commissioning Test Plan, CTS, Design Qualification, TSIQ, TSOQ, TSPQ, CIP, SIP, Qualification Release documents, Qualification Summary Reports etc)

• Attend project meetings

• Stakeholder Management & Alignment with QA, MU, MS&T, Projects etc

• Develop & Track the Overall C&Q schedule (e.g protocol generation, field execution, review and approval dates etc)

• Responsible for following up closely with respective functions on items gating Commissioning & Qualification.

• Perform Pre-Requisite checks for each Commissioning & Qualification Phases prior to protocol execution

• Management of project deficiencies, project deviations, Non-conformance Report (NCR), 1QEM (Trackwise) etc and lead investigation (e.g root cause analysis) during commissioning & qualification

• Perform field execution of all required Commissioning & Qualification Deliverables (e.g CTS, TSIQ, TSOQ, TSPQ, CIP, SIP, Sterile Hold Studies etc etc)

• Perform commissioning & qualification protocol compilations

• Ensure all commissioning & qualification protocols are reviewed and QA post approved before due date

• Perform provisional and final project handover

• Develop project document management and archiving concept

• Develop & execute Sterile Hold Studies for MU equipment

Any other tasks as assigned by C&Q Leader.

Job Requirement:

· Degree in engineering (Dipl. Ing. / M. Sc. / B. Sc.) or equivalent·

· More than 1 year of engineering project / commissioning / qualification / Compliance in Pharma

· Good technical knowledge with demonstrated ability to deliver safe, effective and fully compliant projects

· Outstanding GxP and regulatory knowledge

· Advanced HSE knowledge

· Fluent in English and proficient in local language

Job Description:

• General / Electrical Failure Analysis Engineer
• Perform failure analysis using various tools and instruments such as Lock-In Thermography, OBIRCH/PEM, 2D/3D X-ray and CSAM;
• Perform sample preparation (parallel lapping, delayering, decapsulation) using FIB, SEM/EDX and other preparation techniques;
• Communicate with customer for selecting proper analytical technique and data interpretation;
• Prepare analytical reports;
• Document new failure analysis operating procedures, training and certification specs;
• Participate/assist in new failure analysis techniques development;
• Perform routine instrument preventive maintenance and laboratory housekeeping;

Job Requirements:

• At least Degree in Electrical / Electronic Engineering; Material Science Engineering; Science & Technology;
• Must be able to perform FA study individually and work well in teams;
• Experience with Thermal/OBIRCH/TIVA/PEM would be preferred;
• Experience in other FA techniques including: Sample preparation (parallel lapping, IC delayering, decapsulation) X-Ray, FIB and circuit edit would be a bonus;
• Experience in Wafer Fab/Semiconductor/LED/Solar/HDD industries would be useful;
• A team player who can be independent, hardworking with a persevering attitude.
• Fresh graduates will be considered for this position too.

The candidate is part of the Data Loss Prevention (DLP) project and operation team. He/she will be reporting to the DLP Lead and be assigned with project and operational work and responsibilities which includes but not limited to, processing requests, investigate operational issues and facilitate security investigation by providing the necessary information in accordance with approved policy and procedures as well as process improvement.

• Plan, deploy and implement Data Loss Prevention on security projects and initiatives
• Responsible for management, advanced configuration, monitoring and fine tuning of Data Loss Prevention solution
• Configure, develop and maintain DLP tools & platform, SIEM and threat detection tools
• Diploma/Degree in Computer Science, Engineering or equivalent
• At least 8 years of experience in IT Incident Management, DLP Operations or SOC
• Experience in multiple channels of DLP implementation and operations
• Good team player as well as strong communications skills
• Strong analytical skills and ability to work independently

ROLE DESCRIPTION SUMMARY

Join us as a Project Safety Engineer (PSE), where you will be responsible to perform systems safety engineering activities required to develop a safe solution (mainly a software), product or projects. In this role, you will apply your Safety Engineering skills within an interdisciplinary team covering all aspects of a system lifecycle.

KEY ACTIVITIES AND RESPONSIBILITIES

As aProject Safety Engineer, you are accountable for:

As a Project Safety Engineer, you conduct safety engineering activities and produce the required artefacts on time, budget and quality for the allocated project / product.

This includes:

· Conducting a range of activities that identify and address safety hazards and risks by ensuring compliance to legislations, safety policies and the Thales Solution Safety Management System

· Developing and maintaining safety key artefacts: system safety program plans, safety case reports, hazard logs, risk assessments, preliminary system safety assessments and system safety assessments commensurate with the processes, standards and best practices employed by air traffic management domain including fault tree analysis and GSN

· Work closely with the engineering integrated product teams to identify, derive and manage safety requirements, ensure that they are included in the solution design baseline and that their compliance is demonstrated through verification & validation and developing effective mitigations and controls to hazards, procedure and/or training

· Provide timely safety subject matter expertise and engineering support. This includes participating and/or chairing system safety working groups, safety review boards and other safety committees and workshops as required

· Apply Model Based System Engineering tools and modelling methodologies to define system safety functions and requirements as well as managing safety data

· Escalate risks when necessary, provide clear reporting and recommendations

· Work in accordance with Thales processes and practices, and contribute to their improvement

You will also improve the Safety culture within AMS in Singapore by developing, sharing and/or improving safety training material, delivering training as required and pro-active behaviour.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

SKILLS & ABILITIES

· Experience in the Systems Safety Engineering process in a safety critical industry such a Defence, Land Domain, Manufacturing, Vehicles, Railway, Aerospace, Nuclear or Oil & Gas

· Demonstrated experience applying industry best practice system safety analysis and operational risk management techniques and methodologies

· Proven track record of successfully leading the execution of system safety programs

· Familiarity with Eurocontrol Safety Assessment Methodology and its system safety engineering processes including core system safety analysis techniques: FHA, PHA, PSSA, SSA, ETA, FTA, HAZOP, FMECA, RAM, etc.

· Experience and understanding of the V-cycle and how/when the safety engineering activities are interfaced with

· Knowledge of international standards of the safety domain: ARP 4761/4754, DO-278A/178C, ED-153

· Excellent problem solving and decision-making abilities, great and positive attitude, ability to learn

· Adapt easily to change to work in an agile system engineering environment to understand a problem and provide optimal solution options in terms of size, scale and complexity

· Able to travel to Melbourne, Australia (a few weeks a year).

EXPERIENCE

· Minimum 10 years’ experience in a similar or adjacent role

· Familiar with management and engineering tools such as DOORS, Polarion, JIRA and FTA tool

· Experienced in top-down (abstract ideation) and bottom-up (detailed implementation) approaches in engineering solutions and can work with colleagues with these views

· Knows the structure of a software and be able to apply safety techniques

· Team player: harmonising, influencing, negotiating, seeking feedback and mentoring / coaching

· Self-driven and highly motivated, passionate about systems safety engineering and continual process improvement to achieve optimal outcomes for all stakeholders

· Keen to grow product and process knowledge over time, to enhance your capabilities as a System Safety Engineer within the given environment of practice

· Knowledge of ‘design-to-cost’ approach means and can quickly preform a cost-benefit analysis to different methodologies before executing a system engineering task

· Excellent written and oral communication skills in English

QUALIFICATIONS

· Engineering or Computer Science degree

· System Safety degree

DESIRABLE

· Understand and application of RAMS techniques such as RBD, life data analysis, MTTF, MTBF, MTTR, FMECA

· Knowledge of transverse engineering disciplines: human factor and cyber-security and their links with safety engineering

· Experience in the development of software products and projects in a variety of methodologies, with a particular focus on iterative/agile development

· Conduct independent safety assurance activities including auditing

· Experience in the ATM Domain and related standards (ICAO)

· French language knowledge

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Application Integrator Engineer, you are accountable for:

· This position requires a deep understanding of

o integration frameworks,

o middleware solutions,

o APIs,

· The ability to troubleshoot complex issues and deliver innovative solutions. With a focus on strategic collaboration and continuous improvement, our ideal candidate is both detail-oriented and forward-thinking

· Guarantee the technical solution for infrastructure & deployment

o System architecture & PaaS implementation

o Define and develop the means so that products are correctly and continuously integrated and deployed in development, quality assurance, and production environments, respecting established rules.

o Support delivery teams with automated tools and scripts to provision infrastructure resources (compute, network & storage) in a simple and efficient manner.

· Secure the product operability

o Understand the functional context of the product up to the point of challenging functional decisions

o Guarantees that the product underlying architecture is state of the art.

o Ensures that operational best practices (supervision/monitoring, backups, archives, log management) are implemented.

· Ensure the software team is informed and aware of operational constraints, and if required trains the team on those topics.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Possess 8 to 10 years of experience in the following:

· Design and implement integration solutions to connect multiple software applications.

o Develop and maintain APIs to facilitate data exchange between systems.

o Collaborate with software developers and IT teams to understand integration requirements.

o Monitor and troubleshoot integration issues to ensure continuous operation.

o Optimize and enhance current integration processes for improved efficiency.

o Document integration processes and maintain up-to-date technical documentation.

· Hands-on experience with message brokers like RabbitMQ or Apache Kafka

· Proficiency in scripting languages such as Python, JavaScript, or Shell scripts

· Familiarity with microservices architecture and containerization tools like Docker and Kubernetes

· Strong understanding of API management and development using REST or SOAP

· System skillset :

o System Administration basic skillset (services, ssh, user management, …)

· DevOps tooling advanced skillset :

o Extensive working experience (at least 3 years) with Containerization: Docker, Kubernetes and Helm

o Using and administrating GitLab CI/CD

o Developing and maintaining Ansible Playbooks and Modules

o Deploying and setup of CI/CD pipelines (closely work with development team to develop CI/CD pipelines and deploy into private and public cloud)

o Scripting experience in Shell (bash or Python) etc

o Using Jira / Confluence

o Code documentation using Markdown

Behaviour:

· Produces Ingenious, astute design, with an open mind

· Excellent communication, presentation and interpersonal skills. Able to fluently communicate with local project team and external stakeholders.

· Collaborative team players preferred

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a ISEP Senior Engineer to be part of our Facilities Department diverse team of talent. You will be responsible to provide support pertaining to Environmental, Health and Safety to wafer fabrication for the company

What you will be working on:

• Familiar with WSH Act, Fire Safety Act and ISO 45001, ISO14001, SS651 so as to ensure compliance to these requirements, including Statutory Equipment & Licenses.
• Ensure that the EHS Management Systems are implemented, maintained, and compliant with all applicable local legislation.
• Ensure safety case implementation and mitigative measures for Safety-Critical Events (SCE) in Major Hazard Industries (MHI).
• Develop, maintain, and periodically test emergency response plans, conduct CERT audits, and lead emergency drills including training, maintain procedure and implement all the requirement.
• Compliance with regulatory and permit/ licenses requirements, through Monitoring & Measurement and standard, work to ensure proper management and accurate reporting.
• Implement of EHS programs to improve awareness and performance towards established goals actively.
• Manage EHS incidents and non-conformance investigations, ensuring corrective and preventive actions are tracked and closed.
• Schedule and coordinate EHS related meeting, inspection and audit (External / Internal)
• Manage, schedule and coordinate EHS trainings including training and revision of training materials.
• Manage EHS reports, EHS bulletin/Alerts Manage and other communications
• Revise and write EHS procedures and work instructions.
• Manage work permit system and contractors management.
• Any other duties as assigned by Manager

More about you:

• Minimum Diploma / Bachelor in Science or Engineering in Environmental, Chemical or equivalent
• Familiar with local regulatory requirements related to workplace safety and health, and all other aspects of safety.
• Strong understanding of chemical safety regulations, ISO45001, ISO14001 and SS651
• Certificates in EHS Internal Auditing (ISO 45001, ISO 14001, SS651) will be significantly advantageous
• Registered Workplace Safety and Health Officer and Fire Safety Manager

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

The candidate is part of the Data Loss Prevention (DLP) project and operation team. He/she will be reporting to the DLP Team Lead and be assigned with project and operational work and responsibilities which includes but not limited to, processing requests, investigate operational issues and facilitate security investigation by providing the necessary information in accordance with approved policy and procedures as well as process improvement.

• Plan, deploy and implement Data Loss Prevention on security projects and initiatives
• Responsible for management, advanced configuration, monitoring and fine tuning of Data Loss Prevention solution
• Configure, develop and maintain DLP tools & platform, SIEM and threat detection tools
• Diploma/Degree in Computer Science, Engineering or equivalent
• At least 5-6 years of experience in IT Incident Management, DLP Operations or SOC
• Experience in multiple channels of DLP implementation and operations
• Good team player as well as strong communications skills
• Strong analytical skills and ability to work independently

Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

Minimum of 6 consecutive months commitment

One time sign-on bonus of $500 after 6 consecutive months of work.

Working location: 2 Simei St 3 Changi General Hospital Lobby B #01-03 S529889

Contact Person: Ms Lyn (91548053)

Tasks and responsibilities:

1. Exhibits a cheerful and helpful manner while greeting guests, preparing their orders and always provide an excellent customer service.
2. Demonstrates a complete understanding of menu items, suggestive selling and explains them to guests accurately.
3. Uses Point of Sale system/cash register to record the order and compute the amount of the bill. Collects payment from guests and makes change.
4. Performs Cash-In Procedure- accounting for all forms of money, bread, etc., during the shift.
5. Prepares food neatly, accurately according to formula, and in a timely manner, based on proper food handling safety and storage procedure.
6. Checks products in service unit area and restocks items to ensure a sufficient supply throughout the shift.

7. Understands and adheres to proper food handling, safety and sanitation standards during food preparation, service and clean up

8. Cleans and maintains all areas of the restaurant to promote a clean image. Understands and adheres to the 3-step method for cleaning

9. Understands and adheres to all quality standards, formulas and procedures as outlined in the SUBWAY® Operations Manual.

10. Maintains a professional appearance and grooming standards as outlined in the SUBWAY® Operations Manual.

11. Performs light paperwork duties as assigned.

12. Accounts for all forms of money, equipment, stocks during the shift.

13. Assist on receiving stock delivery, arranging, and entering POS system including send/call feedback to supplier.

14. Completes University of SUBWAY® courses as directed.

PREREQUISITES

Education: Some high school or equivalent

Experience & Skills: No previous experience required. Ability to understand and implement written and verbal instruction.

Physical: Must be able to work at any area of the restaurant when needed and to operate a computerized Point of Sale system/cash register. Position requires bending, standing, and walking the entire workday. Must have the ability to lift 5 kilograms frequently and up to 20 kilograms occasionally.

Job Descriptions:

• Perform structural design and analysis, loading calculation and drawings for ETFE Skylight, Tensile Membrane, Structural Steel Structures.
• Able to perform Finite Element Analysis Modeling and Analysis of Structure.
• Preparation of 3D structural models and shop fabrication drawings, method statement etc.
• Work closely with architects, engineers, general contractors, fabricators and other professionals.
• Involve in supervising projects and provide progress report.
• Make sure projects meet authorities requirements.

Job Requirements:

• Minimum PhD or Masters degree in Civil and Structural Engineering or equivalent
• Minimum 2 years relevant experience in Civil and Structural Engineering design
• Proficiency with steel 3D modelling, analysis & design software such as Rhino and grasshopper.
• Proficiency with programming language especially C++ , Python and Fortran
• Able to produce detailed layout drawings
• Experience in Tensile Membrane, ETFE Skylight and Steelwork design is an advantage
• Good command of English

Job Description

• Conceptualisation and design of facades, preparation of drawings and structural calculations
• Delivery of technical presentations
• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members
• Supervision of construction, site inspection and training of constructors
• Preparation of technical submissions, proposals and documentation

Job Specifications

• Singaporean or PR preferred
• Degree in Civil, Structural or Mechanical Engineering or related disciplines.
• 3 – 5 years of experience in façade design, engineering and construction and project management
• Proficient in CAD software to create designs and solve technical issues.
• Strong and diverse technical background with effective presentation skills
• Well-versed in construction trends, international design standards and building regulations.
• Possess a wide network of building professionals and property developers.
• Ability to multitask and work well in a team.

Knowledge, Skills and Abilities

• Proficient in CAD and 3D Modelling software - Revit, Rhino, Sketchup software
• Possesses deep understanding about various façade materials.
• Well informed in construction trends, international design standards and building regulations.
• Demonstrate organisation and communication skills
• Possesses relationship building and networking skills.
• Skilled in interacting with people of diverse cultural backgrounds at various levels.
• Possesses strong project management skills.
• Willing and able to travel as needed (1 – 2 times/month)

• Position : Service Technician (Electrical Engineer-Desalination/Water treatment)
• Location : Jurong Island-Company transport provided at Choa Chu Kang/ Jurong East MRT station
• Working hours : Monday -Friday, 9.00am-6.00pm
• Salary (commensurate with experience): Up to $3200+ Site Allowance + 1 month completion bonus + 14 days annual leave + Medical reimbursement + 2 days Family Day
• Duration : 2 year contract - convertible or renewable
• Industry : Power Generation

Main Responsibilities:

• Carry out inspection and maintenance of electrical equipment in Desalination Plant
• Perform troubleshoot and implement solution for safety and maintenance work
• Supervision of contractors and perform administrative duties to ensure high quality of work and comply to safe work procedures

Requirements:

• Diploma in Chemical/ Environmental Engineering (or equivalent) with minimum 1-2 years of related experience in Utilities, Power, Petrochemical or Process Plant
• Candidate without experience or NITEC in Chemical/ Environmental Engineering (or equivalent) with minimum 2-3 years of related experience in Utilities, Power, Petrochemical or Process Plant are welcome to apply
• Willing to OT on weekend/ Public Holiday
• ALL WELCOME!!

Email to [email protected]

***We DO NOT charge our candidates any referral fee nor bind them with

any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

We are innovative, focused and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state of the art solutions as part of Team Rapsodo.

This role requires a highly versatile skill set and you will have opportunities to contribute to all relevant domains. Your responsibilities will include development and enhancing of new and existing products.

Responsibilities:

• Hardware Design, document and develop optimized hardware- PCB Layout and Schematic Capture
• Testing, bug fixing, improving hardware performance
• Create schematic and PCB Library and Bill of Materials
• Preparing plans and documentation to support product through certification/approval
• Assisting on product issues both during production and in-service

Requirements:

• Bachelor's Degree in Electrical or Electronics Engineering preferred
• Minimum 5 years of experience in Hardware Design, Validation, & Optimization
• Proven Experience in High Speed Digital board design with experience in interfacing bus standards like DDR3/4/ LVDS/MIPI/PCIe etc.
• Analog Circuit Design & Simulation
• Experience in developing complex CPU and microcontroller-based system
• Experience in dealing with regulatory requirements such as FCC/CE
• Experience in Design Tools (Altium Designer, Pads logic and layout, Allegro or OrCAD, Microsoft Office package, JIRA, VHDL, Linux)
• Ability to work in a dynamic environment with good communication and interpersonal skills

Based in Singapore, the iOS Software Engineer is responsible in developing native applications of Screening Eagle and Proceq tools - ensuring robust, user friendly and easy to maintain applications.

What will you do

• Develop new user-facing features;
• Translate designs into high quality code;
• Optimise components for maximum performance;
• Explore and apply the latest technologies;
• Motivate team members and give constructive advice.

What do we expect

Basic Qualifications

• BA/BS Degree in Computer Science or equivalent practical experiences;
• 3+ years programming experience in iOS, and less experienced candidates will be considered for junior roles;
• Proficient with debugging runtime issues and performance optimisations;
• Proficient with writing unit tests using XCTest framework;
• Experience with Git version control system;
• Familiar with continuous integration & deployment system (CI/CD).

Preferred Qualifications

• Deep understanding in various design patters and architectures;
• Know how to optimize code using various techniques;
• Full stack skills (also know backend and web etc.);
• Know computer vision, data science, machine learning and natural language processing;
• Have personal projects at GitHub with 100+ stars;
• Experienced in coaching junior developers;
• Experienced in open source projects.