Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Roles & Responsibilities

We are on the lookout for experienced Customer Service Executive to join us

Job Responsibilities:

• Provide prompt frontline services and perform administrative tasks and reception duties.
• Attending to phone and email enquiries
• Maintain proper filing and disposal of confidential documents
• Identify and assess our sales team's needs to achieve customer satisfaction
• Build sustainable relationships and trust with our sales team through open and interactive communication
• Handle complaints, provide appropriate solutions and alternatives within time limits; and follow up to ensure resolution

Requirements:

• Minimum Diploma in any discipline
• Proficient in MS Office applications
• Strong interpersonal and communication skills
• Team player and foster a cooperative work environment

Who will thrive in this role?

• You'll be experienced in a service-oriented environment, resolving customer questions, issues and enquiries is something that comes naturally to you.
• Excellent time management and communication skills
• High attention to details

Other Benefits & Perks

• Medical, Dental, and Insurance Benefits
• Career Progression and Training & Development opportunities

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Title: Application Engineer (ID4539)
Location: Tiong Bahru
Working Hours: Mon to Fri 8.30am-6.00pm
Salary: $3000-$4500

Job Description:
• Provide technical support to users and liaise with development teams for maintenance and updates required
• Optimize applications by integrating new technologies and performing upgrades
• Contribute to manage UAT, demonstrate prototypes and completed applications
• Generate ideas for software innovation based on market trends
• Document development processes, procedures and application version histories
• Keep up with advancements in application engineering and new technologies
• Create efficient and logical databases for clients

Requirements:
• Diploma or higher professional qualification in Computer Science
• At least 2 years of relevant experience
• Proven work experience as an Application Engineer or similar role
• Strong lead developer experience in one or more of the following: Microsoft C#.Net, Microsoft VB.NET, Microsoft SQL Server, Microsoft Azure, PHP, React, Mobile Apps and AWS Micro Services
• Extensive experience in deploying, optimizing, and maintaining software.
• Excellent analytical and problem-solving abilities
• Exceptional customer service, interpersonal, collaboration and communication skills

• Position: Patient Service Associate
• Location: Across Singapore
• Working hours: Shift Rotation
• Salary (commensurate with experience): Up to $4,200 + Performance Bonus
• Duration: Permanent
• Industry: Healthcare

Main Responsibilities:

• Work with Operations Manager with planning and reporting activities
• Collaborates with clinic teams to ensure seamless business execution, reinforce positive morale, and uphold company values
• Attend to patients courteously upholding quality service standard
• Responsible for front-desk duties such as, appointments, billing and payment collection, handle enquiries (email/phone/walk-in)
• Assist radiographers / nurses if required (e.g: bring patients to the scanning room).
• Assists to prepare patients for scans
• Perform insurance/medisave claims submission and verification of particulars and limits in various claims portal
• Collect payment and provide financial counselling for radiological procedures
• Any other duties as required

Requirements:

• Minimum GCE N / 'O' level, NITEC in Nursing or WSQ Higher Certificate in Healthcare Operations
• Experience in healthcare sector
• Good interpersonal and communication skills
• Good customer-service mindset

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Responsibilities:

• Contribute in I4.0 transformation of current Industrial & Manufacturing processes to drive improvement in the process-chain
• Work closely with key stakeholders to understand requirements & build clear problem statements
• Coordinate with Global team to define this project & synchronize with the existing activities & initiatives
• Introduce new IoT sensors to specific machines & Test Benches
• Connecting the sensors to local & network nodes for data collection in the right format
• Integrate the data with existing Cloud Platforms
• Run Simulations
• Perform live data analysis to derive key conclusions and measurable KPIs e.g. for live tracking of system faults / predictive maintenance
• Documentation of the Project & Communication with external & internal stakeholders

Requirements:

• Min. 3 years of Experience in Industrial Automation / Embedded Systems
• Programming skills in C / C++ / Java / Python
• Possesses proven skills in data engineering and data visualization and using simulation tools
• Industry 4.0 Experience a big plus
• Demonstrate the sensitivity to understand and define key customer requirements
• Excellent communication skills (verbal and written) to liaise with various departments & customers locally and internationally

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

Job Description:

• Support department GM to collaborate with Headquarter in formulating project development strategies for metrology products in Singapore and Malaysia to align to organizational strategy and capitalise on potential project opportunities
• Manage and drive team collaboration with internal and external project stakeholders, endorse project deliverables to optimise project efficiency and performance
• Establish service delivery system in Malaysia and lead cross-functional integration on operations with Singapore team.
• Formulate strategies to optimise customer’s maintenance plans and schedules for inspection, testing, repair and predictive maintenance of equipment and systems to minimise downtime and costs
• Manage and review regular service reports to evaluate impact of trends, and potential malfunctions and solutions.
• Support pre and post sales initiatives and drive customer renewals through exceptional service
• Manage departmental plans aligned to organisational strategies and frameworks to drive compliance with Workplace Safety and Health (WSH) and Environmental Management Systems (EMS)
• Manage continuous improvement and change management initiatives for time, cost and quality improvements
• Provide technical training on equipment and systems maintenance for new or complex equipment and systems and development opportunity to engineers
• Conduct regular communication with Japan’s factory and project team in Headquarter for project development and planning

Requirements:

• At least 15 years of engineering experience in semiconductor manufacturing industry will be advantages.
• Excellent interpersonal communication skills
• Excellent presentation skills
• Software proficiencies for Microsoft PowerPoint, Microsoft Word, and Microsoft Excel.
• Overseas travel is required.

Job Description

As a Senior/ Infrastructure Engineer, you will assume the responsibility of conceptualising and crafting cloud and infrastructure solutions, ensuring seamless integration into diverse on-premise or SaaS environments. Leveraging comprehensive expertise across vertical and horizontal technologies, your focus will be on refining, fortifying, and providing solutions to our clients. This entails overseeing the holistic technical design, encompassing infrastructure elements, integration, connectivity, and hosting.

Roles and Responsibilities

• Managing the project lifecycle of infrastructure setup and implementation for our clients.

• Designing and implementing infrastructure solutions, incorporating multi/hybrid cloud design principles.

• Continuously researching and evaluating new solutions and technologies, integrating insights and recommendations into the development process.

• Demonstrating expertise in the products and solutions of major Cloud Service Providers.

• Specialising in best practices for the design, operations, and support of private/public/hybrid cloud infrastructure, covering Network, Storage, Compute, and Security.

• Identifying potential and emerging technologies with relevance to innovation for the company.

Qualifications and Requirements

• Diploma/Bachelor's degree in Computer Science, Computer Engineering, Information Technology, or a related discipline.

• A minimum of 4 years experience in the design, implementation, and consulting of private/public/hybrid cloud infrastructure solutions.

• Hands-on experience and robust technical skills with a proven track record in IT infrastructure and/or emerging IT technologies engineering, specifically in Platform, Storage, Virtualisation, and Cloud infrastructure.

• Strong working knowledge and the ability to apply architecture concepts, frameworks, and methodologies to projects.

• Experience in business and technical analysis, architecture design, and project

• Possession of PMP and ITIL certifications is considered an added advantage.