SUMMARY

Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Review circuit board designs for testability requirements.

· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.

· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.

· Generate reports and analysis of test data, prepares documentation and recommendations.

· Review test equipment designs, data and RMA issues with customers regularly.

· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.

· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.

· Determine conditions under which tests are to be conducted and sequences and phases of test operations.

· Direct and exercise control over operational, functional, and performance phases of tests.

· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.

· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.

· Develop or use computer software and hardware to conduct tests on machinery and equipment.

· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.

· May provide training in new procedures to production testing staff.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

SUMMARY

Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Review circuit board designs for testability requirements.

· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.

· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.

· Generate reports and analysis of test data, prepares documentation and recommendations.

· Review test equipment designs, data and RMA issues with customers regularly.

· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.

· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.

· Determine conditions under which tests are to be conducted and sequences and phases of test operations.

· Direct and exercise control over operational, functional, and performance phases of tests.

· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.

· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.

· Develop or use computer software and hardware to conduct tests on machinery and equipment.

· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.

· May provide training in new procedures to production testing staff.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

• Position : Sales & Project Engineer (Equipment) – Up to $4,000 Basic – Boon Lay - No Experience Required!
• Location : Boon Lay
• Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM
• Salary (commensurate with experience): Up to $4,500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided
• Duration : Permanent
• Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Execute and follow through the sales plan set by the manager with the aim to expand the company’s customer base and ensure its strong presence in Singapore.
• Work as a team to gather information to submit tender.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Any other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Engineering
• Minimum 1 year of related experience or no experience is welcome too!
• Must posses Class 3 Driving License
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

SUMMARY

Direct Test Engineers I & II in operating within area of assigned responsibilities with a high level of efficiency, integrity and enthusiasm, striving to achieve excellence in all endeavors. Designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:

· Recruit and interview Test Engineers I & II.

· Communicate criteria to recruiters for Process Technician position candidates.

· Coach Test Engineers in the interviewing/hiring process.

· Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:

· Identify individual and team strengths and development needs on an ongoing basis.

· Create and/or validate training curriculum in area of responsibility.

· Coach and mentor Test Engineers I & II to deliver excellence to every internal and external customer.

Performance Management:

· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).

· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.

· Express pride in staff and encourage them to feel good about their accomplishments.

· Perform team member evaluations professionally and on time.

· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.

· Coordinate activities of large teams and keep them focused in times of crises.

· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:

· Provide communication forum for the exchange of ideas and information with the department.

· Organize verbal and written ideas clearly and use an appropriate business style.

· Ask questions; encourage input from team members.

· Assess communication style of individual team members and adapt own communication style accordingly.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

Business Strategy and Direction:

· Know and understand the campus strategic directions.

· Define, develop and implement Test Engineering strategies, which contribute to the campus strategic directions.

· Provide regular updates to Assistant Test Engineering Manager on the execution of the strategy.

Cost Management:

· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).

· Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.

· Provide feedback to Assistant Test Engineering Manager on cost and cost trends.

TECHNICAL MANAGEMENT RESPONSIBILITIES

· Perform duties, which involve conventional engineering practices that may include a variety of complex duties from ICT, FVT, ESS to System level test.

· Manage the engineering test function for standard and/or custom devices.

· Through subordinate supervisors or professional staff, identify and evaluate test procedures and test equipment required to perform quality checks.

· Compile and document data necessary to analyze performance and make recommendations for changes in the testing process.

· Assist/spearhead in the development of special test equipment and software text programs as required for the successful completion of project.

· Assist customer, setup training program for new product testing procedures.

· Provide training and assist test engineers.

· Act as the liaison and technical conduit for assigned customers.

· Explore new avenues and test technologies for quality improvements on product assigned.

· Perform detailed analysis on test quality of product assigned, identify trends and spearhead corrective actions.

· Monitor, through assigned test engineer, all NPI activities.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelors of Science in Electronics or Electrical Engineering from a college or university; and five to ten years experience

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Perform regular maintenance and troubleshooting of wafer fabrication diffusion equipment including implanters, vertical/horizontal furnaces, RTO/RTP platforms, Laser RTP systems, and EPI.
2. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
3. Maintain Equipment capability for production and meet production demand
4. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
5. Engage in Equipment troubleshooting and production quality improvement.
6. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality.
7. On-call support if emergency situation
8. Schedule shift on-duty

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

• Position : Project Engineer (M&E Constuction) – Up to $5,500
• Location : Office at Toa Payoh | Project Site Based
• Working hours : Monday to Friday | 8.30am to 5.30pm & Saturday 8.30am to 12.30pm
• Salary (commensurate with experience) : Up to $5,500 + HP Allowance $50 + Up to $250 Transport Allowance + 12 to 18 days Annual Leaves + Medical Benefits + Dental Benefits
• Duration : Permanent
• Industry : Construction & Engineering

Main Responsibilities:

• Requisition of resources for the projects such as labour, materials, equipment and others.
• Monitor the progress and performance of sub-contractors. Perform project management to ensure that project progresses according to schedule and to take the appropriate corrective action when deviations arises.
• Liaise with customers, consultants, clerks-of-work and statutory authorities on matters concerning the progress of work, acceptance of work, approval of plans, problems faced and others.
• Liaise with Purchasing Department on the delivery of items purchased for the project and reduce/minimise wastage of material/equipment/ resources
• Ensure proper hand over of project to the customer when it is completed. Be responsible for the administration of contract, claims, disputes, variation and final accounts.
• Solve all work co-ordination or technical problems at site. Carry out inspections of incoming materials and equipment for the projects at the work site.
• Conduct quality checks on work done by workers.
• Prepare and Control shop drawings & Material Requisition.
• Recommend and execute corrective method for Non-Conformance Performance.
• Prepare Quality Plan.
• Carried out assignment as detailed by the Senior Manager / Project Manager / Assistant Project Manager.

Requirements:

• Minimum of Diploma in Civil Engineering/Construction Engineering/Electrical Engineering
• Minimum of 1- 2 years of experience in similar capacity under building/construction/engineering industry
• Have Electrical Background is a must

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Job description

DB Golf Center is looking for a Customer Service that join our Team

Job description:

Providing excellent assistance and support to customers before, during, and after purchasing products or services.

Key responsibilities include:

1. Respond promptly to customer inquiries via phone, email, chat, or in-person.

2. Resolving customer complaints and issues effectively and efficiently.

3. Providing product information, troubleshooting guidance, and technical support as needed.

4. Processing orders, returns, and exchanges accurately and in a timely manner.

5. Maintaining a positive and empathetic attitude toward customers at all times.

6. Building and maintaining strong relationships with customers to ensure satisfaction and loyalty.

7. Keeping records of customer interactions, transactions, comments, and complaints for analysis and reporting purposes.

8. Contributing to continuous improvement initiatives by providing feedback on products, services, and processes.

9. Adhering to company policies, procedures, and service standards while delivering exceptional customer service.

Qualifications:

• Strong communication skills
• Empathy, patience, problem-solving abilities
• Customer-centric mindset
• Great use of Microsoft

Added value if:

- Knowledge in marketing to assist in promoting products or services and understanding customer preferences and trends.

- Proficiency in written and spoken Chinese to effectively communicate with Chinese-speaking customers and support business initiatives in Chinese-speaking markets.

Starting date as soon as possible.

Job Type: Full-time

Pay: $2,300.00 - $2,900.00 per month

Benefits:

• Employee discount
• Flexible schedule
• Growth Opportunity

Schedule:

• Holidays
• Weekend availability (Roster)
• Flexibility in timing

Supplemental pay types:

• Performance bonus
• Yearly bonus

Work Location: In person

AVN Digital is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking to hire a “Data Engineer”. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Location: Singapore

Job Type: 1 year contract under AVN Digital

Summary of the Requirements

The successful candidate will be supporting data engineering activities for the Enterprise Data Warehouse in major project initiatives for Data Strategy Group.

Mandatory Requirements:

• Possess a degree in Computer Science/Information Technology or related fields.
• Proficient in Python, SQL, PL/SQL, and CICD.
• Familiarity with data warehouses such as Snowflake and Oracle.
• Strong analytical and problem-solving skills.
• Good team player and communication skill.

Skillsets (Good to have)

Familiarity with Denodo.

Brief Job Description

The successful candidate will be involved in the creation of solutions for data services automation.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and AVN Digital’s personal information and privacy policy.

AVN Digital is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking to hire a “Data Engineer”. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Location: Singapore

Job Type: 1 year contract under AVN Digital

Summary of the Requirements

The successful candidate will be supporting data engineering activities for the Enterprise Data Warehouse in major project initiatives for Data Strategy Group.

Mandatory Requirements:

• Possess a degree in Computer Science/Information Technology or related fields.
• Proficient in Python, SQL, PL/SQL, and CICD.
• Familiarity with data warehouses such as Snowflake and Oracle.
• Strong analytical and problem-solving skills.
• Good team player and communication skill.

Skillsets (Good to have)

Familiarity with Denodo.

Brief Job Description

The successful candidate will be involved in the creation of solutions for data services automation.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and AVN Digital’s personal information and privacy policy.

• Position : Project Engineer (A&A Construction/Junior Role) - Up to 5,500 + Bonus
• Office Location : East - Aljunied
• Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Any other duties assigned

Requirements:

• Minimum of Degree in Architectural/ Building / Construction Management or related; with at least 1 year of experience with restoration projects.
• Great team player with pro-active attitude.
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Roles and Responsibilities:

- Assist in managing and enhancing the customer visit experience

- Help with crowd control and ensure visitor safety

- Maintain cleanliness and orderliness of the playground

- Manage playground inventory and storage

- Operate and maintain playground equipment

- Support daily check-in and check-out procedures

- Assist with daily event activities and performances

- Perform other tasks as assigned by the supervisor

Preferred Candidate Requirements:

- 16 years or older

- Able to work weekdays, with flexibility for shifts, weekends, and school holidays

- Minimum qualification of a GCE ‘N’ Level Certificate

- Positive attitude with a strong commitment to customer satisfaction, creating a welcoming, energetic, and friendly atmosphere

- Ability to work well with young children and their families

- Flexibility to work shifts, weekends, and public/school holidays

- Able to stand or walk for extended periods

- Previous experience in customer-facing roles is an advantage

• Position : Project Engineer -HVAC/ACMV
• Working hours : Monday to Friday , 8.30am to 5.30pm
• Location: Office in Boon Lay-Islandwide
• Salary (commensurate with experience) : Up to $5500 + AWS + Minimum 2 months Variable Bonus (max up to 5 MONTHS BONUS) + 16 days Annual Leaves + Medical Benefits
• Duration : 2 years contract renewable or convertible
• Industry : Refrigerating, Air-conditioning & Ventilation Machinery - MNC

Main responsibilities :

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required.
• Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
  HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
• Stop the work if any unsafe conditions are identified.

Requirement:

• Experience in IO point schedules, assignments and materials selection with value engineering
• Project management skill required.
• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent
• Min 2 years related experience in HVAC/ BAS industry
• Understanding of PLC (eg. Siemens/Allen-Bradley)

Email to [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide coaching, guidance, feedback and training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics
• Min 5 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Photo / Track equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Summary

Equipment Engineer is responsible for the installation, troubleshooting and maintenance of production equipment.

Responsibilities

• Initiate meeting within the team or with cross functional counterparts to resolve complex integration issues and chronic hardware issues.
• Manage and plan new equipment start-up to support production, from facilities hook-up, vendor startup, to acceptance of equipment for production.
• Establish Preventive Maintenance (PM) plans for all equipment taking into account safety and optimize PM for quality, cost, and productivity. Including spare review, planning, budgeting and tracking.
• Establish and document work process and conduct self-audit to ensure specifications meet company Quality Standard requirements.
• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Any other ad-hoc duties as assigned.

Requirement

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics Engineering
• Hands-on experience in equipment maintenance or troubleshooting
• Experience in a semiconductor/electronics/electrical manufacturing industry preferred
• Fresh graduates are welcome to apply

The Service Quality Associate (SQA)act as the media between internal partners and residents as well as their families. The SQA is to maintain high standards of care and service delivery, promoting residents’ well-being, and ensuring a conducive living environment for residents, through gathering feedback and working with internal partners.

Work Location: Tampines Care Home

Client Care Management

• Act as the point of contact to interact and gather feedback from residents and their families to understand their needs and preferences.
• Work towards resolving issues and ensuring a positive outcome for all parties involved.
• Collaborate with internal partners within the care home to ensure a cohesive and collaborative approach to resident care and service delivery.
• Identify and share areas of improvement and provide recommendations.

Training and Activity Management

• Coordinate and deliver in-service talks to residents and staff.
• Encourage residents to participate in activities and events for their health well-beings.

Service Quality

• Monitor and evaluate the quality of care provided to residents by conducting regular assessments, audits and surveys.
• Identify areas for improvement and recommend strategies to enhance the quality of services.
• Implement initiatives to enhance resident satisfaction and improve the overall resident experience.
• Prepare reports for management and regulatory agencies as required.
• Ensure that the care home complies with all relevant regulations, policies, and procedures. Stay abreast with industry standards and best practices to maintain compliance.
• Escalate to HOD or Senior Management Team (SMT) for feedback that warrants immediate attention or has insinuation of escalation to public forum or media.
• Track all visits, feedback, recommendations and report at Vanguard Rehab and Clinical Meeting (VRCM) platform or any other platforms when necessary or required.

Administration

• Maintain accurate records of quality assurance activities, resident feedback, and compliance measures.

Requirements

• Diploma / GCE “A” level / GCE “O” level / GCE “N” level in a relevant discipline
• Possess at least 1 - 2 years working experience in Service Quality function or quality improvement programmes in healthcare or similar setup.
• Those with experience in Nursing Homes and/or long-Term Care Facility would be preferred.
• Ability to interact in at least 2 of the languages/dialects such as Malay, Mandarin or Tamil to communicate with the clients and families.
• Effective interpersonal, engagement and follow-up skills
• Detail-oriented
• Passion for quality and ageing issues
• Good written and verbal communication skills

Job Purpose:

• To liaise with module engineers on yield performance analysis
• To drive for defect reduction and yield improvement activities

Job Description:

• Supervise YDD Associate Engineers and wafer tech operators to ensure smooth 24/7 inline shift operation
• Train and certify DO Associate Engineers on recipe creation and defect source knowledge
• Maintain and enhance internal SOP/CAS and involve in internal;/external audit
• Operate FIB/SEM/EDX for inline failure analysis
• Operate and create recipes in Brightfield, Darkfield and other YDD tools
• Maintain and housekeep Brightfield, Darkfield and recipes of other YDD tools
• Perform partition analysis on defect source and detailed reports on issues
• Build and develop defect source library and tool’s defect source fingerprinting
• Track inline defect performance by layer/process tool/chamber on weekly basis
• Perform killer ration analysis
• Perform defect characterization by process tools
• Continuous improvement activities on defect reductions with Modules / vendors / equipment team
• Liaise with process engineers in different modules to troubleshoot for inline defects and defect reduction activities
• Provide scan support in low yield investigation & co-work with PI/YE/PE on technology & device specific yield enhancement activities
• Automate daily activities to improve troubleshooting speed of team
• Responsible for wafer quality to conform to product requirements and have the authority to stop shipment and stop production to correct quality problems

Job Requirements:

• Masters or Bachelor Degree in Electrical / Electronics / Chemical / Microelectronics Engineering
• 3-6 years of relevant work experience in high volume manufacturing of electronics components in an MNC or semi-conductor industry preferred
• Excellent interpersonal and communication skills with good leadership capability
• Strong analytical skills and able to work under pressure in a fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, PowerBI

We are looking for Registrar grade Staff for service provision for the following disciplines:

• Anaesthesia and Surgical Intensive Care
• Breast Surgery
• Cardiology
• Dermatology
• Diagnostic Radiology
• Emergency Medicine
• Endocrinology
• Gastroenterology and Hepatology
• General Surgery
• Geriatric Medicine
• Infectious Diseases
• Internal Medicine
• Laboratory Medicine
• Orthopaedic Surgery
• Otorhinolaryngology - Head & Neck Surgery
• Palliative Care Medicine
• Rehabilitation Medicine
• Renal Medicine
• Respiratory and Critical Care Medicine
• Rheumatology
• Urology

Applicants

• must possess a basic medical degree AND a postgraduate medical qualification
• postgraduate medical qualification must be registrable with Singapore Medical Council
• should have at least 3 to 6 years of working experience post internship

HOYA Electronics’ primary focus is on the development of optical and extreme ultraviolet (EUV) photomask blanks, which are critical components in the manufacturing process of the latest-generation chips used in various applications such as artificial intelligence, high-performance computing, and 5G. The company also manufactures a range of photomask blanks used in the production of chips for various applications such as memory, logic, and power devices.

Life at HOYA Electronics

HOYA strives to create innovations for a better future for people.

At HOYA Electronics, we are dedicated to innovation in the information technology segment, envisioning a world where all can thrive in harmony with nature. Our people are guided by our mission along with principles of commitment and innovation, influence every decision and action we take. We prioritize environmental protection, safety, and human rights, fostering diversity, inclusion, and employee well-being.

Be Empowered to Innovate and Develop for a Better Tomorrow with Us

• Experience an empowering and inclusive workplace that fuels your growth and development.
• Unlock your potential with abundant opportunities for skill-building and career advancement.
• Thrive in an environment that supports work-life balance and values your well-being.
• Receive fair and competitive rewards – your success is our success.
• We believe in recognizing excellence and celebrating your contributions.

Get to Know the Role

We are seeking a Senior Engineer to become part of our Development team at our manufacturing facility, which focuses on new product and technology development. Your responsibilities will include participating in the development of deposition processes for new product innovation, employing statistics-driven methods for experimental design and data analysis, and staying updated on the latest advancements in the field. Strong communication skills are essential, as you will need to coordinate with the R&D team at our facility in Nagasaka, Japan, to provide engineering support for all activities and new product setups.

Essential Responsibilities

• Research and Development: Lead and participate in research projects focused on developing new mask blank materials and technologies. This includes designing, synthesizing, and characterizing thin films and materials used in photomask blanks.
• Process Development: Develop and optimize deposition processes (e.g., sputtering, chemical vapor deposition) to achieve desired material properties and performance criteria. Implement process control strategies to ensure consistency and quality.
• Material Characterization: Conduct in-depth analyses of materials using various characterization techniques (e.g., SRM, TEM, XPS, AFM) to evaluate film properties, uniformity, and defect levels. Interpret data to guide the development process.
• Collaboration: Work closely with cross-functional teams, including product development, manufacturing, and quality assurance, to ensure the seamless integration of new materials and processes into production. Provide technical expertise and support throughout the product life cycle.
• Innovation: Stay abreast of the latest advancements in material science and semiconductor technology. Identify and explore new opportunities for innovation and improvement in mask blank technology.

Skills and Competencies Profile

• Bachelor’s/Master’s/PhD in Materials Science, Chemical Engineering, Physics or a related field.
• Minimum of 5 years of experience in Research and Development, with a strong background in thin-film deposition, material science, and semiconductor manufacturing. Experience in the mask blank industry is highly desirable.
• Expertise in thin-film deposition techniques (e.g., sputtering, CVD), material characterization methods (e.g., SEM, TEM, XPS, AFM), and process optimization. Proficiency in data analysis and interpretation is required.
• Experience demonstrating statistical skills in data analysis. Knowledge of JMP, Minitab, DOE, and SPC is preferred.
• Excellent written and verbal communication skills, with the ability to convey complex technical concepts to a diverse audience.
• Able to work effectively in both cleanroom and fast-paced environments.

HOYA Electronics Singapore Pte Ltd is an equal opportunity employer. We are committed to building diverse teams and creating a safe and inclusive workplace that enables our people to perform at their best, regardless of nationality, ethnicity, religion, age, gender identity or sexual orientation, and other attributes that make every individual unique.

An offer with HOYA Electronics Singapore is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. HOYA Electronics Singapore does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with HOYA Electronics Singapore

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Are you curious about the advancement of technology that enable millions of devices to be created on a single silicon chip the size of your finger? Are you pursuing to become a wafer fabrication expert in a fully integrated process chain? Look no further as UMC Process Integration Engineer position is the perfect fit for you.

UMC Singapore is expanding its production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. We are looking for Process Integration Engineer to maintain customer production by ensuring stable wafer quality and on-time wafer delivery through process integration and daily management. This position provides excellent opportunities for growth and development.

Responsibilities

• Introduce customer's new product to FAB and support in new product's tape out procedures to ensure pilot success.
• Improve new Product yield and ensure mass production inline, WAT and CP yield stable
• Define standard operation procedure for daily job
• Co-work with module engineers to solve production related issues. (inline, WAT, yield and reliability...)
• Co-work with module engineers to develop customized process to meet customer special requirement

Qualifications

• Possess at least a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Physics, Material Science
• Study in specialized in wafer chip or related semiconductor course
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• At least 4 years of semiconductor device process engineer background
• At least 4 years in semiconductor foundry experience

Key Responsibilities:

• Develop, execute, and document testing protocols for semiconductor manufacturing equipment, ensuring compliance with industry standards and internal quality benchmarks.
• Leverage your knowledge of backend semiconductor manufacturing processes to inform testing methodologies and validate equipment performance in real-world scenarios.
• Work closely with R&D engineers, product managers, and other stakeholders to define testing requirements, analyze data, and recommend improvements.
• Utilize statistical analysis and data interpretation skills to assess equipment performance and reliability, presenting findings to engineering and management teams.
• Ientify and troubleshoot issues in equipment functionality and performance, providing actionable feedback to the engineering team for design improvements.
• Maintain thorough documentation of testing procedures, results, and equipment specifications to ensure knowledge transfer and regulatory compliance.

Qualifications:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field;
• 5 years of experience in semiconductor manufacturing, specifically in backend processes.
• Strong understanding of semiconductor testing methodologies and validation processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams.
• Familiarity with industry standards and regulatory requirements related to semiconductor manufacturing.
• Experience with design of experiments (DOE) and statistical process control (SPC).
• Knowledge of semiconductor manufacturing equipment and processes (e.g., packaging, assembly, testing).
• Previous experience in an R&D environment is advantageous.

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Diploma in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

AVN Digital is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking to hire a Cloud/OnPrem Engineer- Hybrid IT Engineer L2-. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

JOB TYPE:

Long Term Contract

Responsibilities:

1. Install and configure software and hardware

2. Manage servers and other related technology tools

3. Set up accounts and servers

4. Monitor performance and maintain systems according to requirements

5. Work with users and vendors to take timely and appropriate steps to resolve and troubleshoot issues impacting service levels and conduct root cause analysis

6. Ensure security through access controls, backups and hosts firewalls

7. Ensure patching is done monthly and systems are upgraded with new releases and models

8. Ensure systems always comply with security policies, including vulnerability assessment, patching, and hardening.

9. Respond promptly to Incidents and SRs

10. Generate and Review Accounts monthly or as per required

11. Researching and recommending new approaches to improve the computer system.

12. Providing technical support when requested within and after office hours

13. Develop expertise to train staff on new technologies

14. Build an internal technical documentation, manuals and IT policies

Requirements:

Possess the relevant qualifications and/or be proficient in the following areas:

- Minimally Five (5) years hands-on experience in administration of On-Premise Servers and Cloud Operations (AWS and Azure).

- Working experience with IAM, ECS and EKS in AWS/Azure

- Working experience with Route Tables, NACL, Security Groups, NSG

- With DevOps experience e.g. CI/CD pipeline building and management

- Very good working experience with Terraform using Ship/Hats

- Good working experience with Linux and Windows platform

- Good working experience with Microsoft Hyper-V, VMWare ESXi’s & vCenter, Nutanix, Azure and AWS experience

- Very proficient with Windows Operating Systems 2012/2016/2019/2022 Server

- Very proficient in Active Directory, DHCP, DNS, Group Policy, IIS, SCCM, WSUS, Windows Cluster

- Preferably experience in Commvault/Netbackup Veritas Backup Products

- Preferably experience in TrendMicro/Symantec Anti-virus products

- Exposure with cloud automation tools such as Terraform, Chef etc

- Knowledge with storage products is an advantage

- Resourcefulness and problem-solving aptitude

- Proficient in coordinating and communicating customer requirements

- Proficient in Windows scripting, powershell or any other scripting language

- Able to handle demanding service response and recovery turnaround

- Able to manage daily support tasks to meet stringent SLA requirements

- Excellent scheduling and multitasking skills

- Meticulous and process-oriented

- Good, hard-working attitude with ability to work well under pressure

- Good communication skills English (written, spoken)

- Good analytical skills with ability to work with others to resolve problems.

- Good organization skills, with ability to properly document and track information.

- Good understanding with Application tiers, IIS, Databases

- Good understanding with Change Management processes

- Having experience in WOG environment is a plus

- Regular 8x5 support (shift rotation but no graveyard), required to be on standby for 7x24 support. Expected to work during off-peak hours on system activities

- Basic understanding of Linux OS and willing to be cross trained in Linux/Unix environment

- Basic Networking knowledge is a plus

- Preferably certified in RHEL, Microsoft Certified Systems Engineer (MCSE), Microsoft Certified Systems Administrator (MCSA), ITIL or equivalent.

- AWS SysOps Certified or Azure Administrator Certified is a must

To submit your application, please apply online or share the updated cv to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Khalid Farooq

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and AVN Digital's personal information and privacy policy.