Job Responsibilities

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
  Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab would be advantage.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Descriptions

• Thoroughly review and understand bidding employer’s requirement documents, project specifications, and process data.
• Translate employer requirements into effective contractor solutions that align with project goals.
• Propose T&I proposal and support project execution.
• Assign work to In-House design team. Timely provide technical proposal or solution to project operation team.
• Liaise and communicate with project stakeholder for technical clarification and conclusion.
• Technical support for SFE Vessel operation and maintenance.
• Support engineering budget (estimation) and cost control.

Requirements

• Bachelor Degree in Civil Engineering / Naval Architect
• Min 10 years of related working experiences in offshore structure design and installation such as offshore platform, jacket and foundation.
• Preferably have experience with Wind Farm T&I.
• Familiar with offshore industrial standards and codes.
• Familiar with engineering design tools and software.
• Able to work in a team.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

Job Title: DCS Engineer

Work Location: Jurong Island

Expected Start Date: 01 January 2025

Responsibilities for this position may include but not limited to:

• Provides engineering design, troubleshooting and maintenance of Distributed Control System (DCS)
• Troubleshoot day-to-day process problems related to process control applications, controller tuning and batch receipes execution
• Supports Process Hazard Analysis and implements process changes through a Management of Change Process
• Maintains up-to-date documentations for the DCS
• Conducts training programs for operators on DCS & Batch Receipes
• Initiates and manages DCS hardware life cycle, software and process control network upgrades
• Leads / supports development and execution of control system pojects, and greenfield projects

Required Qualifications

• Bachelor's Degree in Electrical / Electronics / Instrumentation and Control / Chemical from an accredited university
• Minimum 5 years of related work experience in DCS in the refinery, petrochemical or checmical industry
• Strong analytical / trouble-shooting skills
• Good interpersonal and communication skills
• Able to work independently in a team and in a diverse enviroment.

Preferred Qualification:

• Knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Knowledge in SQL Programming / Power BI, Process Controls Domain & Network adminstration.

Intersted candidates, do drop me your resume @ [email protected]

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are looking for a dedicated and skilled Assistant Engineer to support our maintenance team in ensuring the smooth operation of all machinery and equipment. This role is ideal for someone who has a strong technical foundation and is eager to learn and grow within a maintenance engineering environment. The Assistant Engineer will assist with routine maintenance, troubleshooting, and repairs while ensuring safety and efficiency in all tasks.

Be Part of Our Success

• Assist senior engineers in routine maintenance tasks and repairs on equipment
• Aid in diagnosing and addressing minor issues promptly to reduce downtime
• Help carry out scheduled preventive maintenance tasks to keep equipment in optimal condition
• Record maintenance activities accurately, including repairs, replacements, and inspections, under the guidance of senior engineers
• Ensure all work adheres to safety standards and regulations; actively maintain a safe working environment
• Assist in managing spare parts inventory, notifying senior staff of low stock and needed reorders
• Work closely with the maintenance and production teams to complete tasks and support the overall maintenance strategy

Qualities We Value

• Diploma in Engineering
• Ability to diagnose and repair complex systems
• Able to adapt and work under tight schedule
• Able to communicate effectively with customers
• Strong analytical skills to identify issues and implement effective solutions
• Possess class 3 driving license
• Working location is in Ang Mo Kio
• Singaporeans only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated
• Meaningful work and projects that make a difference in people’s lives
• A fun, passionate and collaborative workplace
• Competitive remuneration and comprehensive benefits

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field

Tasks and Responsibilities

• Overseeing the regular maintenance and repair of shipyard facilities, including buildings, docks, cranes, and other equipment.
• Planning and executing facility improvement projects, such as building renovations, dock expansions, or utilities upgrading.
• Ensuring all facilities adhere to safety regulations and standards.
• Developing and managing budgets for facility maintenance and improvement projects.
• Identify opportunities to improve energy efficiency in shipyard operations and implement cost-saving initiatives.
• Ensuring compliance with environmental regulations and implementing sustainable practices.
• Identify potential risks to shipyard facilities and operation processes.

Job Requirements

• 2 years of experience in heavy industry, preferably Shipbuilding industry.
• Read technical diagrams and schematics for work planning and issue resolution.
• Diagnose or troubleshoot faults in the plants and machinery.
• Carry out electrical wiring / mechanical installation and technical maintenance works.
• On-site installation, system setup, calibration, testing, onsite repairs and preventive & corrective maintenance.
• Ability to identify and resolve issues related to facility operations.
• Experience in developing and managing budgets.

Job Responsibilities:

1. Utilize wireless vibration sensors & cloud-based diagnostic analysis software to provide clients with remote diagnostic analysis of machinery health services.
2. Collaborate with client maintenance teams to develop and implement condition-based monitoring programs, and reliability-centered maintenance (RCM) strategies.
3. Continuously monitor asset performance through PHM remote diagnostic services, identify opportunities for improvement, and develop and implement reliability improvement initiatives.
4. Perform data analysis, failure mode and effects analysis (FMEA), and root cause analysis to identify potential failures, their impact, and underlying causes. Offer technical guidance and support to the stakeholders in optimizing asset reliability and performance.
5. Responsible for the vibration alarm setting and optimization, diagnostic models on the PHM system.
6. Collaborate with PHM solution engineers to perform data verification and analysis work.

Requirements: -

1. Proven experience (over 3 years) in reliability engineering & vibration diagnostic field, with the ability to independently diagnose equipment faults, and offline testing experience.
2. ISO Category III certification. Understanding of equipment reliability, predictive maintenance strategies, root cause analysis, and equipment data analysis.
3. Familiar with the principles and maintenance of rotating equipment (such as motors, gearboxes, fans, pumps, etc.)
4. Preferably with bachelor’s degree in engineering, or a related field (Mechanical, Electrical, Industrial, etc.), specializing in equipment fault diagnosis would add advantage.

Job Descriptions

• To do up products specifications for main contractors, architects, Consultants
• Establish Communicative Business Relationship With Prospective Clients at long term.
• Be the account manager for the projects

Job Requirements

• Candidate must possess at least a Diploma & Above, preferably construction related.
• Self Confidence, strong analytical mind, able to communicate with various professionals and different site personnel, friendly, team player & target oriented.
• Possess own car
• Required skill(s): MS Excel, MS Powerpoint, MS Word.
• At least 2 year(s) of working experience in the related field is required for this position.
• At least Project based type Sales Experience
• Handling Specifications

Benefits

• $600 transport allowance
• Can claim home season parking, parking fees and ERP charges pertaining to work can be claimed on reimbursement basis.
• Petrol Fleet card given
• Company mobile line, phone and laptop will be provided
• Annual leave starts from 10 days
• Entitled to quarterly profit sharing, have quarter sales target which set by HQ and once they exceed the sales target, they will have the profit sharing on the excess amount. Personal target will be set by HOD, once hit then is eligible for the profit-sharing pool. Team work is important.

Working Hours

• Mon - Fri, 5 days work week
• 8.30 - 18.00

About The Role

Zero-Error Systems (ZES) is seeking a Product Engineer to join our team and help us revolutionize the industry. As a Product Engineer, you will join a team of specialised engineers to design, verify, test, and operationalise our System-on-Module (SoM) products by using high-performance Field Programmable Gate Arrays (FPGA) SoC devices.

Key Responsibilities

• Work closely with the product development team, and be involved in the FPGA product development lifecycle including system design, IP development, testing, application-use case, and production
• Contribute to the full design methodology (from front-end to back-end) based on FPGA, including the design of customized circuits/Intellectual Properties (IPs)/systems and the configuration/programming of macro-IPs (e.g, ARM cores, and communication interfaces) within FPGA cores
• Create and review the test programs to support and validate the FPGA product development
• Support the FPGA design upgrade
• Maintain and provide good documentation for the FPGA product development
• Any other duties assigned

Key Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Xilinx or Altera
• Good knowledge of Verilog register-transfer-logic design and hardware functional verification concepts/test methodology is desirable.
• Hands-on experience in FPGA development tools such as AMD/Xilinx VivadoExperience in digital design and embedded software development using FPGA will have added advantage.
• Comfortable in Linux environment, and programming skills/experience in C/C++ are preferred.
• Good problem solving and failure analysis skills
• Good team player and results-oriented
• Excellent communication skills

Measures of Performance

• FPGA Platform - Setup/Installation/Maintenance of an FPGA platform to support the product development
• Hardware/Software Validation - Together with the team, qualify/quantity the performance/functional of the FPGA products, including Hardware/Software co-design
• Product Demonstration - Together with the team, demonstrate the application use-case for the FPGA products

For interested candidates, please forward your resume to ZES HR at [email protected]

Job Descriptions

1. Manage the day-to-day sales activities for the semiconductor manufacturing equipment products (e.g. CMP tool) within the designated sales territory so as to achieve the sales target set by management.
2. Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
3. To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts. Manager is expected to make directions for the team to achieve these sales targets
4. To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products (e.g. CMP tool)
5. To make, develop and manage the localized marketing and sales program for the sales territory.
6. To communicate with the sales team to understand customer demands and offer sales support where necessary.
7. To work with EC to set the industry pricing level.
8. To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
9. To work closely with EC on the new accounts and new products, using the local team to win new contracts.
10. Establish customer rapport an acceptance
11. Any other duties as assigned by the management

Job Requirements

1. Knowledge of commercial and shipping documents (Incoterms)
2. Knowledge of the semiconductor manufacturing equipment products(e.g. CMP Tools).
3. Diploma/Degree in Engineering or equivalent
4. Good people skills with a pleasant personality.
5. Strong communication, interpersonal and customer service skills.
6. Excellent presentation and negotiation skills.
7. Ability to work independently as well as collaboratively within the team.
8. Must be prepared to travel overseas for training and to our customers’ location in the region as required.

Preferably to have Sales work experience in Japanese company in semiconductor industry for more than 5 years.

(Those without the relevant experience may be appointed as Senior Sales Engineer initially with a view to be upgraded later)

(Those with more years of relevant experience may be appointed to a relevant management position)

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday

Job Responsibilities

• Prepares Primavera P6, to monitor the progress and substantiate time and cost entitlements.
• Prepares preliminary master schedule for pre-tender, tender and contract programmes.
• Prepares and maintains an intergrated schedule of drawings, procurement, construction, test & trials, integrated logistic plan using Primavera P6.
• Prepares baseline schedule which includes resource loading using Primavera P6.
• Identify descrepancies, delay and provide recovery schedule to Project Manager.
• Assist with the preparation of Extension of Time (EOT) claims, including presentations to clients.
• Prepares progress reports and progress audits, inclusing S-Curves, progress trackers and programming health checks.
• Prepares receovery programmes and presentations summarising key recovery strategies.
• Prepares detailed commissioning programmes
• Prepares baseline schedule which includes resource loading and cost loading.
• Provides advise on post-contract claims, reviews, disputes and litigation on programming.
• Any other ad-hoc duties as assigned by superior.

Job Requirements
• Degree in Civil Engineering or equivalent
• Min. 2 -3 years experience in the same field or equivalent
• Must have Primavera P6 Certificate
• Good team player and ability to work in a fast-paced environment
• Hands-on experience with Primavera for (2 to 4 years experience)

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Job Responsibilities:-

1. Primarily responsible for the development of wireless vibration temperature data acquiring solutions for industrial enterprises and rotating equipment ends, managing the entire process from pre-sales solution design to project delivery for major client projects. This includes PHM requirement analysis, technical solution design, and product development.
2. Responsible for the on-site delivery management of industrial IoT projects, including on-site engineering design, network setup, system upgrades, equipment IoT integration and debugging, performance testing, and configuration of SaaS software functions on the cloud.
3. Conduct vibration analysis for rotating equipment using Vibration Analyzer. Analyse vibration data to identify potential issues and recommend appropriate corrective actions.
4. Communicate effectively with suppliers and customers regarding technical solutions.
5. Responsible for training and knowledge transfer to customers to ensure they can effectively use the PHM platform. Additionally, tasked with identifying new functional requirements from customers and providing feedback to product development for adjustments, maintenance, and optimization of existing features.

Requirements:-

1. Possess minimum 3 years of experiences in vibration condition monitoring-related fields, with familiarity in IoT, big data, artificial intelligence, cloud computing, and other industrial internet domains.
2. Experience in implementing vibration condition monitoring projects for industrial enterprises and system integration, with a background in rotating equipment diagnosis & maintenance, and industrial IoT project implementation.
3. Understanding of the IT/software integration industry, basic knowledge of IoT, and the product architecture of platform+SaaS applications.
4. Preferably have a Bachelor’s degree or above in engineering, with strong business communication and pre-sales solution development skills. Must have a self-driven business approach, be outgoing, diligent, and possess a rigorous professional demeanor.
5. Possess valid SG class-3 driving license

Job Responsibilities

• Prepares Primavera P6, to monitor the progress and substantiate time and cost entitlements.
• Prepares preliminary master schedule for pre-tender, tender and contract programmes.
• Prepares and maintains an intergrated schedule of drawings, procurement, construction, test & trials, integrated logistic plan using Primavera P6.
• Prepares baseline schedule which includes resource loading using Primavera P6.
• Identify descrepancies, delay and provide recovery schedule to Project Manager.
• Assist with the preparation of Extension of Time (EOT) claims, including presentations to clients.
• Prepares progress reports and progress audits, inclusing S-Curves, progress trackers and programming health checks.
• Prepares receovery programmes and presentations summarising key recovery strategies.
• Prepares detailed commissioning programmes
• Prepares baseline schedule which includes resource loading and cost loading.
• Provides advise on post-contract claims, reviews, disputes and litigation on programming.
• Any other ad-hoc duties as assigned by superior.

Job Requirements
• Degree in Civil Engineering or equivalent
• Min. 2 -3 years experience in the same field or equivalent
• Must have Primavera P6 Certificate
• Good team player and ability to work in a fast-paced environment
• Hands-on experience with Primavera for (2 to 4 years experience)

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are looking for a proactive Electronics Assistant Engineer with a diploma in Electronics or a related field to support our engineering team. This role involves assisting in the development, testing, and maintenance of electronic systems and components. The ideal candidate will have a solid understanding of electronics principles and a desire to learn and grow in a dynamic environment.

Be Part of Our Success

• Assist in the assembly, testing, and troubleshooting of electronic circuits and systems
• Support the design process by preparing prototypes and conducting tests
• Collaborate with senior engineers to gather requirements and assist in project development
• Document testing procedures, results, and modifications made during projects
• Proficient in technical documentation and reporting
• Help in the selection of electronic components and materials for projects
• Participate in maintaining laboratory equipment and ensuring safety standards are met
• Stay informed about new technologies and trends in electronics

Qualities We Value

• Diploma in Electronics Engineering, Electrical Engineering, or a related field
• Experience through internships or projects related to electronics is an advantage
• Basic understanding of circuit design and electronic components
• Familiarity with testing equipment such as oscilloscopes, multimeters, and function generators
• Understanding of programming basics (e.g., C, C++) for embedded systems
• Basic knowledge of CAD software for electronic design (e.g., Altium) is a plus
• Strong problem-solving skills and attention to detail
• Good communication skills and ability to work well in a team
• Willingness to learn and take on new challenges
• Singaporeans Only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working location is in Ang Mo Kio

Your Job

As a Plating Engineer, your primary purpose is to develop and optimize plating process engineering that aligns with customer requirements. You will work on implementing low-cost, high-efficiency plating production technology. This role involves strategizing plating processes for new projects, ensuring the feasibility of product designs, analyzing and mitigating risks, and collaborating with various teams to enhance plating quality.

Our Team

You will be reporting to the Plating Expert. You will be part of the Division of DSS, specifically within the Manufacturing Engineering Development department and the Plating ME section. You'll work closely with a diverse group of professionals, including Product Managers, Product Designers, AQP, Project Management Engineers, Tooling Designers etc.

What You Will Do

• Develop and optimize the plating process engineering to meet customer requirements, focusing on cost-effectiveness and efficiency.
• Collaborate with project teams to strategize plating processes for new developments and design plating processes.
• Ensure the plating manufacturing feasibility of product designs and address any potential risks.
• Work with design, manufacturing, and other process teams to innovate and improve processes.
• Involve yourself in designing new tooling for existing and new products and assist in resolving production and quality issues.
• Engage in New Product Introduction and plating manufacturing engineering, and solve plating quality issues.
• Participate in Equipment 3D Design projects to enhance plating capabilities.

Who You Are (Basic Qualifications)

• Develop and optimize the plating process engineering to meet customer requirements, focusing on cost-effectiveness and efficiency.
• Collaborate with project teams to strategize plating processes for new developments and design plating processes.
• Ensure the plating manufacturing feasibility of product designs and address any potential risks.
• Work with design, manufacturing, and other process teams to innovate and improve processes.
• Involve yourself in designing new tooling for existing and new products and assist in resolving production and quality issues.
• Engage in New Product Introduction and plating manufacturing engineering, and solve plating quality issues.
• Participate in Equipment 3D Design projects to enhance plating capabilities.

What Will Put You Ahead

• A Bachelor’s Degree in Electrochemistry, Electrochemical Engineering, Materials Science/Engineering, or an equivalent technical discipline is preferred.
• Experience in the plating manufacturing processes of connectors and familiarity with connector applications and performance.
• Expertise in designing plating equipment and a minimum of three years of experience at an electrical connector manufacturer or with a plating chemistry/process supplier.
• Proficiency with design tools such as NX and CAD (2D/3D) and a strong foundation in plating technical expertise.
• A good team player with qualities such as humility, respect, and a positive attitude.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Customer support is seeking a field service engineer for supporting our regional as well as worldwide customers. The ideal candidate is one having experience on both Integrated Control Monitoring System (ICMS) as well as propulsion/steering control systems. Hands-on service or operational experience on the main engine and thrusters is an added advantage.

The role also involves providing the onboard services, commissioning of refit and retrofit projects, remote guidance/product support to our customers as well as being part of a knowledge pool giving backend support for the field service team.

Responsibilities:

• Focus on customer support, commissioning and service on assigned Kongsberg Maritime Merchant & Automation product range
• Cover service activities in South East Asia and maintain good relationship with existing clients
• Workshop test and technical preparations
• Proper preparation and execution of work assigned and ensure performance are met at all times
• Responsible for generation of service reports, update drawings, cable information database and other relevant documents
• Provides remote guidance / product support to customers, commission and project management of refit/retrofit projects and backend support to the service team
• Assist our sales department with technical issues
• Handles pre and post administrative work
• Required to undertake ad-hoc duties which may be assigned from time to time.

Requirements

• Minimum Diploma or Degree in Electronics /Electrical/ Instrumentation
• Minimum 3 to 5 years of related field experience in Alarm Monitoring and Control System as well as the good knowledge of computer hardware/peripherals and basic software’s
• Experience onboard ship for automation systems (controls and propulsion), system process knowledge, distributed control systems and power management
• Relevant working experience in maritime industry
• Must have excellent co-operative skills, good communication skills, result-oriented, self-motivated and the project-management skill
• Meticulous & methodical approach to remote case handling
• Self-driven attitude to find solutions to problems.
• Passion and patience for handling customers – Service oriented
• Ability to work independently
• Able to travel overseas on short notice
• Pay package will be commensurate with experience

Description of the Role:

The Service Sales / Project executive / Engineer MUST at all times maintain confidentiality of all prices and plans and SHALL NOT disclose confidential information without the approval of the Senior Manager and or management.

Key Tasks:

· To assist the Sales / Service Manager / Assistant Manager in developing, review, and execute service sales plans to generate new business with new accounts.

· To follow up on any request for site visit and capture ALL necessary information related to follow up on the sales / tender.

· Conduct cold calls, site visits and customer integration.

· Provide quotations and submit proposals to customers on a timely basis.

· To carry out costing for review of profitability of each customer’s account and develop plans to improve margins. (Have to understand the market trends)

· To follow up on the sales strategy – collaborate in the setting & delivery of business plans to achieve sales targets.

· Follow-up on all sales inquiries, tender and RFQ.

· Ensure that all customer issues relating to customer service, service recovery and credit control are coordinated and update the Sales Manager / Assistant Sales Manager

· Prospecting and developing business across country.

· Analyse competition landscape, market trends and customers’ expectations and plan for strategic and tactical actions.

· “One Face to the Customer “over the entire Service Sales & Execution timeline. This includes all pre sales activities including contract signature until final Servicing and customer handover of generator set

· Coordinates with the purchasing team and the needed supply chain, lead times and cost for project relevant key components that need to be sourced locally. Updating the database regularly to ensure that ALL information on parts/materials and customer’s information.

· To follow up on ALL requirements on documentations submission when running projects / submission of tenders and have them updated.

· Coordinate with the operations team when required on issues for follow up

To follow up as directed and coordinate all post sales activities as part of the maintenance schedule plan, which starts from

Requirements:

Education

· Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in any field.

Knowledge / Experience / Others

· At least 1 years of working experience in Power Generation industry.

· Successful previous experience as a sales representative or sales manager, consistently meeting or exceeding targets.

· Demonstrate ability to communicate, present and influence credibly and effectively at all levels of the organization.

· Possess strong hunter mentality, business sense and industry expertise.

· Personal competencies.

· Driving license is preferable.

· Excellent communication, sales, and customer service skills.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are seeking a highly skilled Senior Software Engineer with strong Solution Architecture capabilities to lead the front-end development of our small, agile team. You will work together with a group of UX Designers and UX Engineers, ensuring that our solutions are scalable, technically sound, and compatible with cross-division systems. This hybrid role requires hands-on technical leadership, architectural oversight, and an understanding of WCAG standards and accessibility best practices. This role will be offered as a 2-year contract.

A brief summary of your job responsibility:

• Lead the UX Engineers in delivering high-quality, scalable front-end code
• Ensure that development process follows best practices for maintainability, performance, security, and accessibility
• Provide mentorship to the team, reviewing code, and helping solve technical challenges
• Evaluate cross-division systems and existing infrastructure to ensure compatibility and integration of proposed solutions
• Identify potential system limitations or risks early in the design process and work with teams to address them
• Design systems and applications with a focus on reusability and long-term maintenance
• Actively participate in coding, prototyping, and developing front-end components
• Communicate technical challenges and solutions to both technical and non-technical stakeholders
• Align technical execution with business goals, working closely with the Program Manager and other team members to meet deadlines and deliverables
• Stay up-to-date with the latest AI developments, tools, and trends, and explore ways to integrate them into development processes and products

To succeed in this role, you will ideally have:

• Strong front-end development experience to guide UX engineers
• Proven experience with solution architecture, especially in evaluating system-wide compatibility and scalability
• Ability to understand and integrate solutions across different systems, ensuring they align with organizational infrastructure.
• Proven experience leading small technical teams, with a focus on collaboration and mentorship
• Strong cross-functional collaboration skills, ensuring alignment between technical execution and business needs
• Keen interest in AI technologies and familiarity with AI tools that can be leveraged to optimize development efforts
• Experience working in agile teams, particularly in lean environments where quick iterations and adaptability are key.
• Experience working on A11Y and strong understanding of WCAG standards

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.
  

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Research Engineer/ Senior Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges.

We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will work closely with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

• Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.
• Implement MLOps best practices to automate model training, deployment, and monitoring processes.
• Implement and optimize machine learning algorithms and deep learning architectures.
• Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.
• Optimize AI pipelines for scalability, reliability, and performance.
• Conduct performance analysis and optimization to improve model efficiency and accuracy.
• Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

• Bachelor or Master Degree in Computer Science/Engineering or relevant disciplines
• Must have a minimum of 5 years of experience as a Software Developer/Engineer
• Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerisation Technologies
• Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular
• A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.
• Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)
• Can do attitude and happy to interface with multiple stakeholders
• Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail
• Excellent verbal and written communication skills
• Hands-on experience with machine learning frameworks/libraries
• Understanding of machine learning algorithms and techniques
• Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.