Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

• Provide a positive customer experience with fair, friendly, and courteos service
• Handle phone calls for reservations and enquiries
• Greet and direct guests to available tables
• Record orders and serve orders, comfortable with handling alcoholic beverages when needed
• Input orders into POS system
• Maintain a clean, neat and safe environment
• Able to communicate effectivetly with team members and guests
• Other Ah-hoc duties as assigned

OTHER INFORMATION:

• Transport Allowance
• Night Shift Allowance
• Staff Meal provided
• 6 days work week, 9 hours per shift

Yee Jie Ling Jaslin | EA Reg. no.: R1440114

RS Recruitment Agency LLP | EA Licence no.: 17C8809

Helmsion Engineering is always on the lookout for talented professionals to join us, add value and ideas to our business. At the same time, Helmsion is keen to induct new blood and new talents. If you have what it takes to grow to become the future leader of Helmsion, you are welcome to apply:

Service Technician

· Carry out repair, maintenance and installation of hoisting equipment.

· Carry out site inspections, review and evaluate as well as carry out site service and repair work.

· Equipment and tools maintenance.

· Maintain accurate records and documentation of service and repairs activities.

· Other duties as assigned.

Requirements

· Minimum NITEC in Engineering discipline. Fresh graduates welcomed to apply as training will be provided

· Basic electrical and/or electronics knowledge would be preferred

· Have good initiative, enthusiasm and willingness to learn

· Good verbal and written communication skills

· Team player

· Class 3 driving license much preferred

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with the Contractors of the IWMF and also TWRP.

• With a focus on inter-disciplinary construction management, assist the CRE to coordinate the existing team of discipline Lead Resident Engineers as required, including liaison with our in-house Engineering Design Manager (EDM) on any outstanding design issues that may affect immediate construction activities.

• Lead and coordinate the construction work interface between IWMF contractors and TWRP contractors works and tie-ins etc and in particular with counterpart Interface Manager from TWRP.

• Lead and set up interface meetings between the various Contractors to drive the Contractors to resolve their coordination and tie-in point issues.

• Coordinate with BIM Manager and set up interface BIM walk through sessions as required with the Contractors.

• Project delivery planning updates for the interfacing/tie-in points from the IWMF/TWRP Contractors with a specific focus on MEICA issues given the stage of the project.

• Coordinate and expedite internally on urgent RFA/RFI submissions with regards to interfacing matters, in particular between EPC1 and EPC2 but also with IWMF and TWRP.

• Attend other site meetings as required by CRE and coordinate internally to resolve technical issues with the Contractors with regards to interfacing matters with a specific focus on MEICA issues given the stage of the project.

• Attend and follow-up on interface/coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, interface meetings with TWRP, etc and as required for the coordinated completion of the Works under each contract as they lead into the Testing and Commissioning phase of the project.

Requirements:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with resource planning and budget milestones.
• Perform site study for PV system recommendations.
• Manage site team for safety compliance.
• Monitor project progress for specification, schedule, and budget alignment.
• Plan and prepare Bill of Materials (BOM).
• Coordinate with procurement for timely material delivery.
• Create checklists for solar project inspections.
• Investigate and troubleshoot M&E issues with stakeholders.
• Assist LEW with site testing and inspections.
• Design electrical and mechanical drawings using AutoCAD.
• Requirements:.ubmit project documents for authorities.

Requirements:

• Diploma in Mechanica/Electrical Engineering, or equivalents.
• Knowledge of AutoCAD, Solidworks, or modeling software (e.g., SketchUp, PVsyst, Helioscope) is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Salary: $3500 - $5000 (basic), travelling allowances
• Overtime claimable, Performance bonus
• Degree holders with no experience can apply
• On-the-job training is provided
• Good working environment
• Career advancement

Main purpose of the job

To perform repair, inspect and commission Company’s System (cranes, drilling systems, pipe-lay systems etc.) at the client’s premises or at the Company under supervision of an experienced service engineer

Responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1 year of relevant experience as Service Engineer in Oil & Gas/Marine industry
• Candidates with no experience can apply as on-the-job training is provided
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily and work overtime
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your resume to [email protected]

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical & Electronic or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

• Free Shuttle Bus Service (Tuas West MRT)
• Youthful & Dynamic Work Culture Environment
• Career & Growth Development

Roles & Responsibilities

Job Summary

If you enjoy working in a fast pace environment and the challenge of redefining what good service means to people, this position is for you.

Join JIJI.SG's operations and customer service team to help us improve and exceed our customers' expectations when they shop with us!

In the process, learn how operations is managed for an online store, from inbound operations such as freight forwarding and receiving shipments, to outbound operations such as picking and packing, working with 3rd party couriers and managing our in-house delivery fleet.

Most importantly, future team members must have a strong sense of dedication to our customers' happiness.

Job Description

• Responsible to deliver a customer-centric experience and assist customers across all channels including phone calls, emails and live chat.
• Going the extra mile to ensure customers’ needs and expectation are met.
• Actively involved in refining customer experience through customer feedbacks and observing daily operations.
• Proactive and initiative to constantly improve internal processes.

Requirements

• Strong communication and problem-solving skills to assist customers with any issues they face when they shop with us, including product enquiry, delivery or order related enquiry.
• Cheerful and friendly disposition when communicating with customers.
• Strong sense of dedication to our customers’ happiness.
• Process-oriented and good attention for detail.
• Accountable and responsible team-player.
• Able to work independently and also as a team.
• Past experience in either operations or customer service will be a plus.

Job Description & Requirements

The Customer Service is responsible for coordinating with customers, logistics operators, and customs officials to plan and track the movement of goods to ensure that they are cleared through customs or quarantine, as well as developing relationships with potential customers.

**Shuttle service is provided from/to Joo Koon

Job Responsibilities:

• Perform system data entries and related functions for customers and ”Internal Warehouse Management System” (iWMS)
• Coordinate with customers and internally for Operation and inventory-related matters
• Ensure all paperwork, system, and filing is completed on time and accurately
• Plan and follow up on Orders to ensure on-time delivery
• Generate accurate billing invoices, inventory reports, and related reports as per the required deadline
• Attend to customer inquiries and ensure all requests and issues are resolved
• Any other duties assigned

Job Requirements:

• Minimum O'level/N'level
• Good interpersonal, communication and analytical skills
• Able to work as a team player, pro-active, self-motivated and high sense of responsibility
• Entry level candidates are welcome to apply

Duties and Responsibilities

• To support the OSH program and make safety and health a part of their daily routine and to ensure that they are following safe work methods and relevant regulations
• General administrative support as required by members of Transport Dept. and management
• Liaise with customers or vendors related to procurement and administrative requirements
• Monitor vessel schedule vis PSA Portnet and Jurong port system.
• Declare permit via Trade web Live(permits)
• Manage customer orders and transportation requests within the TMS, ensuring accurate input and timely processing. Manage and address customer queries that are routed by TMS systems
• Retrieve and analyze data from TMS system and or other internal systems to address customer requests
• Coordinate with internal teams, carriers, and logistics partners to schedule pickups, deliveries, and transit times in accordance with customer requirements via the TMS.
• Monitor delivery status and information in real-time, providing updates to customers and stakeholders as needed via the TMS.
• Generate and analyze reports from the TMS to track key performance indicators (KPIs), such as on-time delivery, customer volume metrics and customer satisfaction scores.
• Serve as the primary user and administrator of the TMS for managing customer orders and deliveries
• Prepare documentation for lifting operation perform in Port facilities.
• Prepare documentation for cargoes clearance from Keppel distripark,Jurong port.
• Prepare and submit police escort application for Out of Gauge (OOG) Cargoes.
• Perform general administrative duties eg, Invoicing, Filing, mailing, faxing and photocopying

QUALIFICATIONS AND EDUCATION REQUIREMENTS

• GCE ‘N’ or ‘O’ levels
• 1 year administrative experience. (Preferred in logistics industry)

SKILLS COMPETENCIES

• Good communication skills (both verbal and written) and excellent organizational abilities.
• Familiar with PSA Portnet, Jurong Port system and trade Web Live
• Meticulous and attentive to details and follow ups
• Capable to work independently and pressure
• A good team player who is self–motivated and independent with good attitude.
• Willing to take responsibility and accountability of their role.
• Capable of identifying and suggesting improvements
• Well-versed Microsoft Office skill: Power point Presentation, Excel & Word

Working Conditions

5.25 Working days per week

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

You are entrusted with the responsibility to lead in the strategic directions, manage the manpower and oversee the daily operations of the assigned Active Ageing Centre (AAC) to fulfill its intended purposes as stipulated by the funders and Loving Heart (LH).

Responsibilities:

1. Staff Management

• Collaborate with HR to recruit and develop centre staff, ensuring each team member’s strengths and potential are maximised for effective and efficient deployment in the AAC.
• Champion a learning culture within the team by providing guidance and support to enhance staff capabilities and build capacity.

2. Strategic Planning (Community Outreach and Stakeholder Management)

• Develop a comprehensive Community Outreach Plan to achieve the annual targets for AAC 2.0.
• Oversee the planning of communication and publicity materials to promote the Active Ageing Programmes.
• Formulate strategies for asset mapping to reinforce existing relationships, identify and connect with new community partners, and cultivate sustainable partnerships to support services for seniors.
• Take a proactive role in engaging and maintaining partnerships with community stakeholders to better meet seniors’ needs.

3. Centre Operations

• Lead regular reviews, planning, and evaluation of programme rollouts at AAC, ensuring all activities (both within and beyond the Centre) align with the AAC 2.0 service guidelines.
• Oversee the systematic collection and documentation of data for reporting purposes, ensuring timely and accurate reporting.
• Closely monitor each centre’s Key Performance Indicators (KPIs), implementing measures to gather and report data within the designated timeframes.
• Manage the allocated budget with a focus on adherence, optimising resource use and ensuring all expenditures align with planned budgets.

4. Other Duties

• Perform any other responsibilities as assigned by reporting officer

Qualifications & Requirements:

• Degree or Graduate Diploma in the field of Social Sciences (i.e. Social Work/ Gerontology) preferred
• At least 4 years of experience in direct operational roles such as running a social service-related Centre (preferably in the area of Eldercare)
• Prior supervisory experience, with at least 2 staff reporting to him/ her
• Strong stakeholder management skills, able to develop and build relationship with wide variety of community partners
• Knowledge in financial management – adherence to allocated budget and ensure cost-effectiveness
• Strong administrative skills – good documentation and report writing
• Proficient in Microsoft (Word, Excel and Powerpoint)
• Enjoy working with seniors
• Good problem-solving skills
• Strong interpersonal skills, a team player, yet able to work independently.
• Strong communications skills, preferably bilingual.
• Dynamic, quick thinking, adaptable and responsive to change.
• Enthusiastic and self-motivated.