JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational down-time.

As a IT Support Engineer, you will be responsible for the following :-

• Assist the project teams with setting up, installing, and configuring operating systems, applications, and peripheral devices for PCs/Workstations.
• Provide first level on-site IT support to end-users on a 24x7 rotational shift, including weekends and holidays.
• The successful applicants should be prepared to be deployed primarily at Woodlands Checkpoint. The successful applicant could be deployed to Tuas checkpoint in future on a rotational basis.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• Experience in installing, configuring, and troubleshooting PC/peripheral devices and providing application maintenance support is necessary.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), KPIs (key-performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

THE OPPORTUNITY

· You’ll get to play a part in a fast and dynamic changing role in one of the fastest growing industry

· We are looking for a strong positive and passionate individual to join our team to improve on our existing products

· You’ll play an important role to determine product quality to win customer confidence and boost their credibility

· You’ll also work closely with team member, developers and project manager to ensure consistency and improve the user experience

WHAT YOU’LL LEARN

Understand and experience with customer user case scenarios

- You’ll be able to understand how’s customer use case and improve or extend test coverage

- You’ll be able to play a part to control product quality in the market

- You’ll get to learn and build up key mindset in software testing throughout the experience

Develop your problem-solving skills and be a team player

- You’ll have the opportunity to solve challenging problems with your teammates

- You’ll be collaborating closely with developers and project managers to improve the user experience, becoming a strong team player.

Learn the latest industry trends and technologies

- By working in our company, you’ll be exposed to the latest industry trends

- You’ll also get the opportunity to work with teammates abroad and learn from one another

JOB DESCRIPTION

· Regular schedule of test execution activities on existing products, e.g. SDK/drivers

· Manual test execution of WiFi driver on Window platform

· Perform different types of testing (functional, regression, performance, etc)

· Liase with internal teams (e.g. project lead/developer/team members) to communicate on bugs

· Co-work with R&D team to reproduce customer issues and help verify fixes

· Track problems, resolutions, and bug fixes throughout testing

JOB REQUIREMENTS

· Diploma holder or any bachelor's degree holder who interested to get involve into testing field

· Good problem solver, ability to troubleshoot and think out of box

· Investigative mind, paying attention to small details and good observer

· Strong analytical skills, able to identify discrepancies during the test process

· Excellent time-management skills and commitment to meet deadlines

· Good communication skills and a team player

System & Instrumentation Field Service Engineer

Are you a Field Engineer looking for a new opportunity?

Would you like the opportunity to work in an Energy Technology company?

Join our Bently Nevada Team

Baker Hughes Bently Nevada offers a holistic suite of machine condition monitoring and protection hardware, software, and services. We help ensure you achieve the highest level of asset reliability. Our team takes ownership of creating and designing unique and customised solutions for bespoke customer requirements.

Be part of a successful team

In this role, you will travel to client sites and assist with installations or ongoing service provision. You will be involved with commissioning new systems and be responsible for maintaining products and systems.

As a System & Instrumentation Field Service Engineer, you will be responsible for:

• Providing services includes Plant Asset Management System commissioning and maintenance for Machinery Monitoring, Protection, and Management Systems.
• Performing installations, commissioning and troubleshooting of Bently Nevada Hardware & Software Products and Solutions at customer locations.
• Providing technical direction, project management, performing discovery session on site with customers and strengthen Bently Nevada Installed base activities.
• Meeting timely completion of standard service reports, invoicing packages, and other administrative requirements along with driving customer satisfaction.\
• Assuring projects are executed in accordance with the cost allocations that are budgeted, including direct cost and labor hour management.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's degree or equivalent from STEM (Science, technology, engineering, and mathematics).
• Be be to accommodate business travel up to 70% of the time. Business travel to Singapore or other countries within APAC.
• Have experience in field services or maintenance position will be an advantage.
• Be a good team player and display good communication skills with fluency in English.
• Have demonstrate effective communication, interpersonal skills with the ability to influence others and team.
• Be a self-starter, proactively taking the initiative to identify and solve problems.
• Be an experienced problem solver, with a methodical approach to solving complex customer issues.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too.

• This is Field position working on various field rotations as advised by your Supervisor. This role is working with our customer on-site within the region.

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Job brief

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• BS/MA in Civil Engineering

Job Responsibilities

-Work with project PI to develop robust catalysts (3 or more) that convert low-quality used cooking oil to sustainable aviation fuel

-Assist in synthesis and formulation of the catalyst, and testing of the catalyst in hydroprocessing using pressurized H2 in small scale Parr reactors.

-Assist in experimental design and optimize parameters required for the lab-scale to large-scale reactions (>500g) for synthesis of the catalysts using solution and/or solid-state methodologies

-Assist in experimental design and optimize parameters required for the lab-scale to large-scale hydroprocess reactions in large-scale 1L Parr reactors.

-Perform scale-up the pre-treatment process, several litres per batch, using large-scale equipment such as the liquid-liquid extractor unit

-Characterization of the catalyst candidates using

-Presentation at regular project meetings and summarize results in reports

Job requirements:

-A degree in Chemical Engineering, Materials Engineering or Chemistry

-At least 5 years of experience

-Knowledge in synthesis and characterization of compounds (powders)

-Knowledge in use of characterization equipment such as PXRD, SEMEDX, XRF, TEM, DLS etc.

-Proactive, team player and good problem-solving skills

-Data analysis and interpretation skills

-Excellent oral/written communication

-Experience in scaled up reactions (>5 L) is preferred

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Mandatory Skills

· Proven experience as a Software Test Engineer or similar role.

· Proficient in JSON, API, and SQL.

· Experience in regression and end-to-end testing.

· Strong problem solving skill and attention to detail.

· Excellent communication skill.

· Ability to learn quickly and work in a fast-paced environment.

· Experience in writing clear, concise, and comprehensive test plans and test cases.

· Willingness to support BAU operations as needed.

Skillsets (Good to have)

· Familiarity with financial instruments and entities.

· Experience with performance testing.

· Knowledge of Agile/Scrum development principles.

· Experience with automated testing tools.

· Understanding of coding and scripting for automation purposes.

· Knowledge of continuous integration and continuous delivery (CI/CD) processes.

· Familiarity with version control systems like Git.

· Knowledge of software QA methodologies, tools, and processes

Brief Job Description

Responsibilities:

· The successful candidate for this role is expected to have a strong background in regression and end-to-end testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

· This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

About us

Dyson is a global technology enterprise. We solve the problems others choose to ignore, with surprising new inventions that defy convention and simply work better. We’ve been developing robot technology for over 20 years – 200 engineers, 420 patents and £28M of investments – but this is just the start of the domestic robotics revolution.

Within Upstream Robotics, Research is investigating state-of-the-art methods to solve concrete real-world problems and pave the way for Dyson’s future autonomous products. At the same time, New Product Innovation is developing Dyson’s next-generation robotic products that leverage the latest technologies.

Our world-class robotics team is highly multi-disciplinary, covering topics including Robot Perception, Reinforcement and Imitation Learning, Planning and Control, Task Intelligence, Software Architecture, Mechatronics and Platform Design within a friendly and multi-cultural work environment.

About the role

As a member of Upstream Robotics’ Software & DevOps team, you’ll design, implement, maintain and extend components of our software platform, support its users, integrate new functionality and take on the occasional proof-of-concept or exploration task. You’ll be collaborating closely with immediate team members, Upstream domain experts and Downstream colleagues. This is an opportunity to play a key role in continuously improving the architecture, practices and tooling with the goal of accelerating research and development, closing the gap to production and shortening time-to-market.

As a Senior Software Engineer, you are expected to:

• Have a solid understanding of core development concepts and best practices
• Work with focus, attention to detail and consideration of system-wide implications
• Deliver tasks effectively to specification, on agreed time and with little assistance, but know when to seek clarifications, help or feedback
• Demonstrate a continuous learning mindset, act on feedback and strive to improve our platform and its utility to users
• Communicate with the wider team proactively, minding efficiency and quality of conversations
• Mentor and support junior team members in technical and ways-of-working matters and create a positive and engaging team environment

Responsibilities:

• Design, implement, test, maintain and evolve functional components and tools of our software platform
• Integrate third-party components and implement new system behaviours
• Port select research prototypes in Python or C++ to modern, robust C++ implementations
• Help manage the entire high-level software stack, including the operating system, device drivers and user interfaces
• Participate in the design of a distributed system software architecture that is scalable and deployable
• Meticulously document and communicate software requirements, design and implementation
• Drive a culture of software quality and collaboration that can progressively become the norm across the group

About you

Required:

• Degree in engineering or equivalent industry experience
• 3+ years of work experience with robotic, actuated, real-time or simulated physical systems
• Strong object-oriented and functional programming skills in modern C++
• Working knowledge of a scripting language such as Python or Bash
• Good knowledge and hands-on experience with Linux system and toolchains
• Proficient use of development best practices and tools including version control, unit testing, continuous integration and continuous delivery (CI/CD)
• Ability to break down problems, estimate development effort and prioritise work
• Habit of exercising engineering precision

Beneficial:

• Professional software development experience in a production environment
• Significant contributions to open-source projects
• Experience inspecting, debugging, testing and profiling complex software systems
• Experience with parallel programming and performance optimisation
• Experience with ONNXRuntime, TensorRT, CVflow, RKNN or deployment to NPU-based platforms
• Experience with profiling and optimizing machine learning models for target hardware
• Experience making real robots or autonomous systems work robustly in the field
• Experience with ROS 2, DDS-based middleware systems and messaging frameworks
• Experience with simulation environments such as Unity or Isaac Sim and simulation at scale in the cloud
• Experience with Yocto/BitBake based build systems
• Experience with containerised development and deployment
• Experience with behaviour planning and decision making architectures

JOB SUMMARY:

The Quality Engineer for Mechanical and Piping ensures adherence to project specifications and standards throughout engineering construction activities. The successful candidate will have responsibilities to encompass inspection, managing QA/QC documentation, coordinating meetings, and enforcing HSE regulations. Key tasks involve material verification, conducting audits, and resolving non-conformances.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance with HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related to ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval
• Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional
• Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

Education:

MS/PhD

JOB SUMMARY:

As a Quality Engineer specializing in Electrical and Instrumentation (E&I), you play a critical role in ensuring the highest standards of quality and compliance across EPC projects. Responsible for overseeing inspection and testing activities related to electrical and instrumentation systems, you will be responsible to ensure adherence to project specifications, codes, and standards. With a focus on safety and precision, you collaborate with project teams, subcontractors, and clients to drive quality assurance throughout all project phases.

RESPONSIBILITIES:

• Always follow all site safety requirements and use of PPE
• Write, modify, review, and implement project related ITP, Procedures, Specification requirements.
• Material Verifications on all incoming outgoing E&IC project related materials and prepare inspection reports.
• Perform specialist inspection surveillance of E&IC fabrication and installation to ensure that contractor carries out the fabrication and assembly work in accordance with the contract specifications, approved drawings and fabrication/erection and test procedures and the defined hazardous area requirements.
• Provide leadership for executing teams on E&IC.
• Perform daily QA/QC monitoring and surveillance.
• To report non-conformance findings.
• Record all defects observed using the Project Completions Management System (Database) electronic punch lists.
• Monitor and check all electrical hazardous area certification related inspection work to assure compliance.
• Proactively advise where work, material or process needs to be revised.
• Use project Completions Management System database, witness, review and survey of electronic E&IC check sheets and to ensure accuracy of information recorded.
• Repair defective works on the spot where possible.
• Closeout punch list items in Completions Management System completed by Contractor/Supplier, etc.
• Witness & conduct various electrical & instrumentation testing.
• Witness & conduct FAT & SAT inspections.
• Witness & conduct PLC Panel, MCC Panel and Electrical Panels FAT
• Final document compilation and submissions.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Authorized to stop contractors’ work where quality is not being achieved.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or retesting.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning, and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops including Instrument Calibration, Control Valve testing, and Material inspections.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Monitoring all installation and inspection of instrumentation work with respective Quality ITPs and Checklist.
• Monitoring and inspection of Loop checking.
• Preparing inspection & test reports of completed inspections & tests.
• Preparation of final quality dossiers / test packs and maintaining backups of completed quality.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality
• Implement, maintain and verify quality system at job site as per company quality procedure and project quality plan.
• Incoming material inspection, review of certification documents and prepare inspection reports.
• Preparation of inspection test plan, review method statements related to instrumentation.
• Inspection of fabrication, installation and commissioning activities for process/electro-mechanical works related to instrumentation.
• Inspection of subcontract works – factory acceptance tests, etc.
• Third party certification of equipment /machinery related to job site.
• Preparation of inspection reports
• Review and compilation of inspection documents for final documentation.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor’s degree/Post Graduate Diploma/Professional
• Degree in Engineering (Electrical, Instrumentation) or equivalent Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Certification/Training in Quality
• A working knowledge of Construction / Electrical / Inspection codes and practices
• The inspector shall have direct knowledge of all aspects of electrical testing such as Insulation, Resistance testing, Current and Voltage testing.
• Have a working knowledge of the National Electric Code/NFPA 70, IEC or equivalent standards.
• Shall be able to inspect complete loop checking, wiring continuity and color coding, start-up, and troubleshooting.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as assigned by your Superior.

Job Responsibilities

-Work with project PI to develop robust catalysts (3 or more) that convert low-quality used cooking oil to sustainable aviation fuel

-Assist in synthesis and formulation of the catalyst, and testing of the catalyst in hydroprocessing using pressurized H2 in small scale Parr reactors.

-Assist in experimental design and optimize parameters required for the lab-scale to large-scale reactions (>500g) for synthesis of the catalysts using solution and/or solid-state methodologies

-Assist in experimental design and optimize parameters required for the lab-scale to large-scale hydroprocess reactions in large-scale 1L Parr reactors.

-Perform scale-up the pre-treatment process, several litres per batch, using large-scale equipment such as the liquid-liquid extractor unit

-Characterization of the catalyst candidates using

-Presentation at regular project meetings and summarize results in reports

Job requirements:

-A degree in Chemical Engineering, Materials Engineering or Chemistry

-At least 2 years of experience

-Knowledge in synthesis and characterization of compounds (powders)

-Knowledge in use of characterization equipment such as PXRD, SEMEDX, XRF, TEM, DLS etc.

-Proactive, team player and good problem-solving skills

-Data analysis and interpretation skills

-Excellent oral/written communication

-Experience in scaled up reactions (>5 L) is preferred

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB SUMMARY:

As a Quality Engineer specializing in Structural aspects, you play a critical role in ensuring the highest standards of quality and compliance across engineering construction projects. Your responsibilities include inspecting structural components, ensuring compliance with project specifications, codes, and standards, and collaborating with project teams to maintain project quality and safety standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance to HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related to ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval
• Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional
• Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

Job Description:

- Work closely with the customers to fulfil test objectives.

- Perform and conduct ammunition testing.

- Complete and submit test reports and related documents.

- Participate in overseas exchanges and projects.

Job Requirements:

- Diploma in any Engineering/ Science discipline.

- Strong team player.

- Able to communicate ideas across effectively.

- Willing to work outdoors.

- Possession of a Class 3 driving license is an advantage.

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

1. To work with customers for their requirements.
2. To work with the government authorities for the requirements.
3. To work with company other departments to support the projects.
4. To work with company sub-contractors to support the projects.
5. To bring in Sales for the company
6. To monitor company monthly and annual sale and report to the management.

Mandatory Skills

· Proven experience as a Software Test Engineer or similar role.

· Proficient in JSON, API, and SQL.

· Experience in regression and end-to-end testing.

· Strong problem solving skill and attention to detail.

· Excellent communication skill.

· Ability to learn quickly and work in a fast-paced environment.

· Experience in writing clear, concise, and comprehensive test plans and test cases.

· Willingness to support BAU operations as needed.

Skillsets (Good to have)

· Familiarity with financial instruments and entities.

· Experience with performance testing.

· Knowledge of Agile/Scrum development principles.

· Experience with automated testing tools.

· Understanding of coding and scripting for automation purposes.

· Knowledge of continuous integration and continuous delivery (CI/CD) processes.

· Familiarity with version control systems like Git.

· Knowledge of software QA methodologies, tools, and processes

Mandatory Skills

· Proven experience as a Software Test Engineer or similar role.

· Proficient in JSON, API, and SQL.

· Experience in regression and end-to-end testing.

· Strong problem solving skill and attention to detail.

· Excellent communication skill.

· Ability to learn quickly and work in a fast-paced environment.

· Experience in writing clear, concise, and comprehensive test plans and test cases.

· Willingness to support BAU operations as needed.

Skillsets (Good to have)

· Familiarity with financial instruments and entities.

· Experience with performance testing.

· Knowledge of Agile/Scrum development principles.

· Experience with automated testing tools.

· Understanding of coding and scripting for automation purposes.

· Knowledge of continuous integration and continuous delivery (CI/CD) processes.

· Familiarity with version control systems like Git.

· Knowledge of software QA methodologies, tools, and processes

Brief Job Description

Responsibilities:

· The successful candidate for this role is expected to have a strong background in regression and end-to-end testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

· This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Project Detail:

· Identify and document project assets in Data Centres

· Update existing document of Asset and Configuration template

· Create new Asset and Configuration template

· Work with engineering team to complete assigned activities

· Provide daily completion status to assigned Project Manager

· Technologies in-scope not limited to the followings

o Platform Servers (WIN & UNIX),

o Backup,

o EMC Storage,

o DB (Oracle & SQL)

o Server count <200

· Expect to start in ASAP

o RHEL Systems Engineer

§ RHEL operation support skill set.

§ Azure experience a plus

§ Experience in RHEL installation, hardening, upgrade, patching.

· Work Location: Depot Road / Ang Mo Kio / Lavender

· Engineer Job Level 8 – 10

• MUST be Singapore Citizen
• MUST clear G50 clearance

BACKGROUND

Base: Singapore

Coverage: Singapore/Asia Pacific

Relationship: Report to Solution Engineering Team Lead(APAC)

Introduction:

Datwyler IT Infra enables organisations around the world to run their IT / OT infrastructure seamlessly and scale their business with ease. Being a well-established company, Datwyler successfully operates in the market as a reliable supplier of innovative system solutions, products and services for data centers, FTTx networks and smart buildings.

How you spend your time:

· Pre sales support to sales team

· Attend to customer enquiries, understand their pain points and propose solution best suited for the deployment

· Maintain strong, productive and collaborative working relationship across all internal stakeholders (Commercial, Business Development, Finance)

· Conduct presentation customers physically and virtually

· Perform product demonstration to customers, partners in exhibition/events in Singapore and regionally

· Make site visits to assess requirements, constraints and situation

· Regional travel to Asia Pacific are required

What will make you successful:

· Minimum 2 years of working experience in Electrical, Electronic, Mechatronics, Mechanical Engineering field preferred.

· Fresh graduates or inexperienced candidates with good learning attitude can be considered as training will be provided

· Intermediate skills using Microsoft Office features

· Excellent verbal and written English communication, verbal communication in multiple languages/dialect will be an added advantages

· Familiarity with SAP ERP or AUTOCAD will be an added advantage

What you can look forward to:

• Flexible working options
• Having a strong impact on decision making processes
• Great team colleagues and flat hierarchy
• Competitive compensation withexcellent benefits

We Offer a Diverse and Global Working Environment
As a globally operating company, Datwyler offers a broad spectrum of job profiles and career opportunities. We offer ambitious individuals who approach their task with dedication and enthusiasm the right environment to excel and grow. This gives every employee the opportunity to influence the way we work. At Datwyler, we enable our employees to bring their talent to a global context and grow it steadily over time. Our employees are therefore at the very heart of Datwyler – we interact with respect, trust and loyalty. Mutual consideration and appreciation are key.

https://itinfra.datwyler.com

1. Ensure that the Inspection department approves fittings, ducts, water pipes, and other accessories before the installation begins.

2. Deliver all tools required for the fitting including power tools, hand tools, scaffolding, and ladder on time and in the exact numbers as mentioned in the list.

3. Prepare, apply, and get approval for the HVAC shop drawings, work method statement, MEP-coordination drawing, and project specification from the head engineer.

4. Coordinate installation schedule with team members and other departments working on the project.

5. Monitor site activities and make sure all rules and regulations are followed. Making reports on daily progress made at work and ensuring it reaches the superiors.

6. Ensure safe construction of heating, ventilation, and air conditioning maintenance according to rules and regulations set by the safety policy manual by the company. They will have to ensure the protection and safety equipment is 100 per cent tried and tested for safe use.

7. Arrange labor and other professionals including pipe fitter, duct fitter and assistant duct fitter.

8. Additional responsibilities include having to arrange for the safety gear and equipment they need to do their work.

9. Documentation of the Conduct Testing inspection process for a variety of tasks including the light test for ducts, underground chilled water piping system, and hydro test.

10, Attending weekly and monthly meetings held by the project manager and QC supervisor to talk about the project updates and completion.

11. Assisting the commission team during the testing, balancing, and adjusting phases of air and hydronic fitting.

Requirement:

1. Minimum 3-4 years experience

2. Prefer Shipyard experience.