• Develop services for new generation EC engine & DF & Gas engine components.
• Manage team to provide service and repair on HPS incl chain drive, HCU incl FIVA valve and alpha lubricator, ECS, modules and ect.
• Establishing workshop facility for FIVA valves and HPU service and testing.
• Develop team to carry out required modifications for EPL as per IMO regulations.
• Develop and execute training plan to enhance technical competence and report writing skills
• Establish capability to provide services on dual fuel marine diesel engines and conversions.
• Assist with inspection, installation (incl. engine alignment), repair, upgrading, troubleshooting and overhaul of diesel engines and auxiliary equipment
• Proactive in communication and accessibility to customers and Dept. Manager with timely reporting on, job status and technical issues.
• Preparation for job, technical information, manpower plan, schedule, tools and tackles.
• Able to prepare work done report, recommendation, repair proposals on breakdown or failure attendance
• Generate spare part list required for overhaul and repair.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Coordinate for all submission.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experience in civil construction projects.
• Familiar with costing, contract, regulations and building operations. Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.
• Candidates with LTA experience preferred

Overview:

We are seeking a talented Test Engineer with 3 years of experience in the Facility Domain to join our dynamic team.

As a Test Engineer, you will play a crucial role in ensuring the quality and reliability of our facility management software solutions.

Your primary responsibility will be to develop and execute test plans, identify and report bugs, and work closely with developers and stakeholders to deliver high-quality products that meet customer requirements.

Responsibilities:

· Develop and execute test cases, scripts, plans, and procedures for facility management software applications.

· Perform functional, regression, integration, and performance testing.

· Identify, isolate, document, and track bugs through resolution.

· Collaborate with cross-functional teams including developers, project managers, and product owners to ensure effective communication and prompt resolution of issues.

· Participate in requirements and design reviews to provide input on functional requirements, product designs, schedules, or potential problems.

· Contribute to test automation efforts and maintain automated test scripts.

· Create and maintain test documentation.

Requirements:

· 3 years of experience in software testing within the Facility Domain or related field.

· Experience in writing clear, concise, and comprehensive test plans and test cases.

· Hands-on experience with test automation tools.

· Strong analytical and problem-solving skills with attention to detail.

· Excellent communication skills and ability to work collaboratively in a team environment.

· Experience with Agile/Scrum methodologies is a plus.

· Knowledge of facility management systems or related domains is advantageous.

This role is responsible for the development of robotic manipulator and actuation applications. This includes conceptulization of end effectors, jigs and fixtures, pick and place sequencing, motion studies as well arm programming and execution including but not limited to

• Responsible for the development of robotic manipulator and actuation applications. This includes conceptulization of end effectors, jigs and fixtures, pick and place sequencing, motion studies as well arm programming and execution.
• Pick and place methods and logic
• Selection of sensors and actuators
• Integration of vision systems
• Tolerance and motion studies
• Working together with application team to design new applications
• Arm simulation for new applications and deployments
• Arm simulation for new applications and deployments
• Training of assistant engineers on arm programming and setup

Requirements:

• Degree in Electrical/Electronics/Mechanical Engineering
• Working knowledge and experience with Yaskawa / Motoman manipulators and the INFORM language
• Excellent knowledge on TM arm programming, setup, commissioning and debugging
• Expereince on applications which require frame shifting and moving frames, integrating and calibrating vision systems to manipulator systems, end of Arm Tooling design, calibration and maintenance

Key Accountabilities:

General

• Responsible for all mechanical related technical solution engineering for major Data Center Projects in APAC.
• Develop and manage complete scope from initiation to onsite delivery of mechanical systems related to the diesel genset enclosure.

Tendering Matters

• Work closely with sales to define the technical scope (mechanical).
• Review/clarify customer’s specifications & tender documents.
• Review and finalize the C/D/E document.
• Provide the technical specifications and define the scope of supply for the equipment.
• Coordinate with factory and local suppliers to harmonize the scope of supply.
• Work with suppliers/contractors to quote for the equipment and obtain proposals timely.

Solution Engineering Matters

• Define the mechanical systems requirements for the walk in genset enclosures suitable for the project needs.
• Provide the design and prepares the drawings and documents for the customer’s technical requirements.
• Calculate, verify, and select the right equipment/suppliers.
• Uses the computerized engineering tools/database, technical library information and factory standards for the solution engineering work.
• Provide and maintain the product and solution engineering information.
• Prepare and carry out technical presentations and training.

Order Execution

• Verify and confirm the shop drawings, P&ID, datasheets, and similar technical documents to ensure customer specification compliance.
• Finalize equipment scope and specifications. Collaborate with internal departments to procure the equipment.
• Raise the purchase requisitions for the scope of supply.
• Support the execution team to resolve technical issue related to the mechanical systems during project execution, from packaging to site related.
• Participate in design review and lessons learnt sessions. Proactively provide valuable insights and recommendation to enhance system performance and efficiency.

​Other Matters

• Update oneself with the technical developments of the market and internal products.
• Travel overseas on business, when required.
• Special assignment from time to time.

Qualifications and Skills:​

• University / college studies in Mechanical engineering.
• Proven experience in the diesel engine/generator industry, min. 5 years with track record of successfully delivered projects and solutions.
• Solid understanding of Cooling system, Fuel system, Ventilation system of a diesel generator set and demonstrate the ability to integrate the understanding into designing a genset enclosure.
• Knowledge of engineering calculation for genset mechanical systems, for e.g., sizing calculation.
• Demonstrating the ability to conceptualize and execute complex mechanical designs and bring cost benefit to the customer.
• Knowledge of data centers, switchgear and electrical power protection would be an added advantage.
• Understanding of Asian cultures and business practices.
• Excellent team player with an open mindset, collaborative spirit, and exceptional communication skills, capable of effectively engaging with diverse teams and stakeholders to achieve common goals.
• Willingness to travel for onsite jobs when needed, demonstrating flexibility and adaptability to meet project requirements and deadlines effectively.
• Proactive and positive attitude.
• Proficient in 2D/3D CAD software.
• Proficient in English language.

SpaceAge Labs is a subsidiary of US Technology company Turing - https://theturingcompany.com/

Turing is a digital solutions provider that uniquely combines the power of AI with human expertise. Named after the father of AI, Alan Turing, the company revolutionizes how businesses around the world manage their water and land operations.

Through AI and IIoT technologies, Turing empowers organizations to achieve unparalleled system performance. Our clients consistently reduce operational costs, minimize maintenance downtime, improve efficiencies, and meet compliance standards with our end-to-end digital solution platforms.

We are looking for a talented Azure DevOps engineer to join our software team in Singapore.

Responsibilities

· Design, implement and maintain Azure-based infrastructure

· Configure and optimize build and release pipelines for continuous integration

· Collaborate with development teams for automating, and deployment processes.

· Implement security best practices

· Manage individual project priorities, deadlines and deliverables.

· Handle day-to-day operations and L2/L3 queries from end users

· Continuous monitoring of health of systems and environments

· Minimum 5 years of experience in the relevant field is mandatory.

Qualifications

· 5-10 years’ experience in DevOps and Azure

· 4 years relevant Experience in Azure and DevOps

· Strong experience with Azure cloud services and Azure DevOps tools.

· Experience in Kubernetes Clusters and deploying using Azure Kubernetes Service

· Proficiency in scripting and automation

· Solid understanding of CI/CD principles

· Familiarity with infrastructure-as-code (IaC) tools

· Experience with monitoring and logging tools

· Excellent problem-solving and troubleshooting skills

· Experience in Python and Django framework containerization a plus (Docker/Kubernetes).

· Experience with AWS a plus

· Singaporean / PR preferred

We are looking for a talented and dynamic Software Engineer who can redefine the standards of excellence in software development. If you're a passionate individual who thrives on challenges and has a track record of delivering exceptional solutions, we want you on our team.

Responsibilities: As a Senior Software Engineer, you will be pivotal in designing, implementing, and delivering high-quality software projects in Java, SQL/Oracle, J2EE, and other Java technologies. Your responsibilities will include:

• Development: Conceptualize, develop, and install software solutions that push the boundaries of innovation.
• Design and Implementation: Design, implement, and deliver complex software projects, adhering to industry best practices and standards.
• Full Software Lifecycle: Participate in all phases of the software development lifecycle, including design, coding, code reviews, unit testing, system testing, UAT, demos, POCs, installation, and maintenance.
• Documentation: Create comprehensive documentation, including software prototypes, system architecture, software design documents, user interfaces, code files, test plans, installation/deployment guides, release documents, and technical documentation.
• Testing: Write test cases, conduct unit testing, system testing, and negative testing to ensure software quality.
• Troubleshooting: Analyze logs and optimize database queries for efficient troubleshooting.
• Continuous Improvement: Stay updated on the latest technological trends and actively contribute to the improvement of operations and system analysis.
• Confidentiality: Ensure the security and confidentiality of sensitive information.
• Information Gathering: Collaborate with users, study system flow, investigate problem areas, and follow the delivery cycle to develop software solutions.
• Quality Assurance: Enforce Newgen quality processes to ensure high-quality software development.

Desired Profile:

• Education: Bachelor's degree in Science, Engineering or Technology
• Experience: At least 5 years of relevant industry experience across various development projects.
• Technological Knowledge: Familiarity with current software development trends, including OOP, Multi-Tier Software development, Component Architecture, and Web-Based Software.
• System Integration: Understanding of system integration issues.
• Analytical Skills: Ability to gather and analyze data, draw logical conclusions, and make informed decisions.
• Programming Proficiency: Strong coding skills and proficiency in Java, JSP, Servlets, EJB, SQL/Oracle, J2EE, and other Java technologies.
• Flexibility: Willingness to travel within India/abroad at short notice and work overlapping shifts as needed.
• Customer-Focused: Prepared to work at customer locations when required.
• Core Competencies: Clear thinking, flexibility, adaptability, effective communication, time management, self-confidence, attention to detail, perseverance, analytical thinking, and a commitment to delivering solutions "First Time Right."

• MNC, 5 days, Tuas,Transport provided
• $3200 - $4200 basic, Allowances, OT claim
• Year end performance bonus
• On-the-job training is provided
• Friendly working environment

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1 year of relevant experience as Service Engineer in Marine industry
• Candidates with no experience can apply as on-the-job training is provided
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily and work overtime
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your resume to [email protected]

JOB SCOPE
This is an individual contributor responsible for identifying and resolving issues of advanced complexity. This position is at a senior professional level and requires strong & advanced execution and analytical abilities. This role works independently and receives minimal guidance.

RESPONSIBILITIES

• Troubleshoot and resolve complex 2nd level network related problems, coordinate resources where necessary and serve as escalation point to 1st level operational teams.

• Respond to and resolve IP network issues within the timeframe of severity level agreements.

• Deploy client solutions and network design implementations.

• Support all aspects of the network management process assuring requests, implementation, and problems are delivered as required with no impact to the global communications environment.

• Take initiative to proactively discover potential network impacts!

• Participate in or lead problem resolution and root-cause analysis.

• Participate in tasks related to change, incident, and problem management.

• Document, create and maintain operational runbooks based on best practice and from knowledge & experience gained from day-to-day operations for continuous operational improvement.

• Conduct internal technical briefing & training for level1 and level2 network operations team.

• Deploy and document changes in accordance with problem and change management process.

• Participate in managing projects introduced by engineering team assuring full implementation and documentation standards are adhered to. Complete the projects objectives within timelines.

• Communicate to both technical and non-technical audiences, resolution and root cause resulting from the outage or service interruption.

• Perform most effective approach to restore, recover, or alter configurations, logical or physical, to maintain service integrity.

• Perform weekends shift duties on rotational basis.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Project Engineer

Diploma / Degree in Civil or Mechanical Engineering
Minimum 2 Years of Construction / M&E Experience
Autocad skills & MS Office Proficient
Basic knowledge in Surveying / Measurements is a plus.
Independent, resourceful, self-motivated, and able to work as a team.
Able to work in a fast-paced environment and handle tight deadlines.

Scope:
To assist the Project Director/Manager in planning, execution and supervision of works.
To assist the Project Manager to liaise with clients and consultants on projects.
Experience in producing, editing, and executing Method Statements.
To co-ordinate sub-contract works.
To assist in site administration.
Attend meetings with client, consultants & subcontractor to ensure that all A&A project requirements are compiled and executed accordingly.
Able to interpret drawings and identify discrepancies within all trades and come initiate solutions.
To lead a team of supervisors to carry out their works accurately and timely to ensure that works on site are carried out according to contract and client requirements.
Responsible on Permit to Work Submissions.
Create as-built Drawings and updates to clients.

(a) Install, assemble, test, or troubleshooting of CCTV / solar photovoltaic (PV) systems / electrical wiring/cabling installation/ electronic circuit on the roof or other structure in compliance with site assessment and schematics.

(b) Perform other ad-hoc or general work as assigned by the Management.

(c) Engage in supply work activities when required (separate assignment on ad-hoc basis).

(d) Assist in planning manpower for work activities.

(e) Contribute to workflow improvement, planning and schedule sctivaties.

(f) Ensure proper housekeeping f spare parts, equipment and tools.

(g) Oversee the work of contractors to ensure safety requipment and operating standards are met.

(h) Perform on the jon coaching of team members.

The DREX-CHEM GROUPis a successful leader in the distribution of specialty chemicals, resins, pigments, printing consumables & equipment in ASEAN and Hong Kong/China. The Company views our human resource as the most vital key to our continuing growth and profitability.

To meet the challenges of our growth market, we have IMMEDIATE vacancies for:

SALES ENGINEERS (Sales)

(Ability to Work in Tuas should only Apply)

Responsibilities :

· Sales, marketing, technical service and support.

· Product development, sales and supply.

· Responsible for processing orders and documentation.

· Identify and create new accounts to increase sales revenue.

· Execute a sales plan and report daily activities to the Manager

· Develop business relationship, visit and make presentation to potential customer.

· Collect and review customers’ enquiries and prepare quotations.

Requirements:

· Degree or Diploma/ITE in Chemistry or an discipline in Chemical, Electrical, Electronics or Mechanical or related discipline.

. Fresh Graduates may also apply.

· 2-3 years’ experience in Sales & Marketing in the Paints/Inks or Printing or Construction Industry.

· 2 years or more hands-on experience in sales or technical support, manufacturing, laboratory or quality control.

· Valid Class 3 driving licence with own car is an added advantage

· Excellent communication skills.

· Good spoken and written English .

· Reliable, loyal, committed, honest and capable of developing new markets.

· Successful finishers with good track record have an advantage.

· Willing to learn and adapt.

· The necessary training will be provided.

· Able to travel overseas for training and business development.

The Company offers excellent career advancement program with attractive remuneration packages for performers. Interested applicants are invited to write in (marked “Private & Confidential”) before 16 August 2024 with full resume, current and expected remuneration details and a non-returnable photograph to:

Drex-Chem Technologies Pte Ltd

1 Tuas, Avenue 16.

Singapore 638924

Attn : HR Manager

Or email to: [email protected]

Responsibilities

• To perform Engineering quality inspection and operation.
• Ensure engineering quality standards are meet accordingly
• Ensure all drawings are well maintained
• Perform necessary 4M change evaluation
• Confirmation on drawings for new and existing models
• Create, editing and maintaining of graphic and dimension design
• Generate of Engineering reports/documents
• Generate of document for Production/Traffic and Store
• Training of QC inspector on inspection procedures
• Co-ordinate with internal department to carry out project/models
• Liaise with respective vendors/customers on quality issue
• Assist on modify/request for new program in SAP system
• Update/Confirmation all products in SAP systems related to new model, version up, and deletion
• Carry out job/backup assigned by Superior
• Ensure 5S housekeeping/Safety rules & regulations are being carry out
• Ensure safety rules and regulations are followed

Requirements

• Diploma in Electrical/Electronics/Mechanical Engineering or related discipline.
• Proficiency in MS Office
• Team Player / Independent / Initiative.
• Good time management and able to multi-task in fast paced environment.

Shift Type / Work Hours

• Normal Shift (5 days work week)
• 7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation.

Job Descriptions:

• Lead and conduct precise troubleshooting of complex problems and working with relevant stakeholders to study the problem systematically and identify effective countermeasures.
• Responding to breakdowns, diagnosing faults and repairing machinery & equipment.
• Playing an active role in executing preventive maintenance, accuracy inspection or any other preferred maintenance program
• Work closely with the Manager/Mechanical Superintendent(s) to analyze data of plants’ critical equipment from predictive and preventive maintenance activities and make necessary recommendations
• Draft and revise maintenance work procedures and work instructions.
• Monitor plant maintenance expenditure and carry out cost saving initiatives and price comparison for high value purchases of non-OEM services, materials and parts.
• Develop the technical designs, including finalizing engineering design documentations, Management of Change (MOC) and Request For Approval (RFA) for minor plant modification works;
• Ensuring that machinery, infrastructure and equipment run optimally with minimal downtime

- Understand plant drawings, mechanical drawings, electrical drawings and PLCS.

- Has machine mechanical /electrical / PLC maintenance experience

- Responding to breakdowns, diagnosing faults and repairing machinery & equipment

- Microsoft Office (Excel / Word / Power point) can be used

- Install new equipment and to perform checks following installation to ensure that all systems are in working order.

• Support plant operation maintenance including spare part management, trouble shooting via on call or on site.
• Implementing site wide EHS procedures for maintenance activities and actively drive safety & Quality culture
• Lead in search, technical review and evaluation of applicable technology, process, equipment and / or material proposals.
• Prepare procurement document including drafting of tender specifications, execution, and evaluation.
• Manage consultant, contractors, sub-contractors, suppliers to ensure a successful implementation of the assigned projects.
• Wide EHS procedures for maintenance activities and actively drive safety & Quality culture.
• To assist and support the maintenance manager for Technical support (advice, material selection, Purchasing order, maintenance history records, and preventive maintenance plan).
• To train and guide the maintenance teams for Continuous improvement

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent
• Min 5 years’ hand-on experience in industrial plant repair and maintenance.
• Good mechanical engineering knowledge besides possessing outstanding organization and communication skills.
• Strong knowledge of Plant process maintenance and machineries which include diverse types of compressors, turbine, boiler, generator, blowers, centrifuges, ventilator, condensers, all types of motor & pumps, gears, heat exchanger and other equipment.
• Driven, analytical with good negotiation, interpersonal, and communication abilities

Mandatory Skills

We are looking for candidates who possess a robust understanding of RACF, rather than those primarily knowledgeable in MF application development. Our ideal candidate should demonstrate deep expertise in RACF and its related functionalities.

Responsibilities:

• Manage and drive z/OS Unix (Mainframe Access Management operations and audits).
• Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.
• Automate manual processes through scripting or via zSecure.
• Possess strong knowledge of designing and reviewing RACF access groupings.

Key Requirements:

• At least 8 years of experience working in a z/OS environment including experience with REXX, Assembler, COBOL, JCL, TSO/ISPF
• Install, configure, and upgrade z/OS and subsystems using SMP/E
• Monitoring system performance and perform system tuning
• Technical support for z/OS and subsystems including engagement of IBM and vendors for problem determination and resolution
• Experience with IBM z15 hardware and peripherals, able to perform hardware configuration changes using HCD/IODF
• Experience with system automation and scheduling tools such as IBM System Automation, Netview, IBM Tivoli Workload Scheduler(OPC).
• Familiarity and support of 3rd party software such as FileAid/Expediter, IBM Omegamon, RMF, ChangeMan
• Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA
• Provide process automation support and maintain SOP documentation
• Support backup/recovery and disaster/recovery planning and testing
• Support periodic system configuration reviews and audit reviews
• Strong communication skills and the ability to work collaboratively in a team environment
• Experience with zLinux and zVM will be advantageous
• Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.
• Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.
• Good to have strong experience with using zSecure Admin and zSecure Audit modules.
• Good working knowledge of Access Management lifecycle and processes.
• Experience in banking or financial services institutions preferred

Job Purpose

Provide strong technical expertise and leadership in Process Development for project transfer and start-up. Work closely with teams to ensure successful implementation of project. Lead and/or support the team for new product transfer I development, equipment design, processes optimization and qualifications efforts. To ensure compliance to ISO/FDA, cGMPs, HSE regulatory requirements.

Accountabilities

• To lead process development activities for project implementation to deliver results within projected timeline, excellent execution and documentation

• To lead and coordinate operational team on site and ensure line availability

• To provide technical provision, operation and availability of modules and line for studies, qualification and validation

• To support design reviews for processes equipment and work with global/ R&D team to develop and transfer the technology to site

• To develop and execute equipment and processes validation run / plan

• To lead and execute new equipment and processes installation, optimization, commissioning, qualification and validation

• To proactively communicate project progress, key issues and any other critical topics in a timely manner to the appropriate management level and vendors

• To ensure compliance to cGMPs, IS013485 / FDA, HSE, and policy requirements

Requirements

• Education: Minimum Diploma in Engineering (Mechanical, Electrical, Automation) or relevant discipline or equivalent
• Experience: 5-10 years working experience in contact lens or optical device manufacturing or similar environment
• Good understanding of processes automation system, vision inspection system, robotics and GMP/GDP requirement
• Good analytical and troubleshooting skill with systemic approach
• Good leadership and management skills

Duties/Responsibilities

Develop Structural & Architecture Design Drawings

1) Assists Technical Manager to prepare Structural & Architecture Design Drawings

2) Prepare erection and shop drawings with accurate cutting lists for fabrication purposes

3) Co-ordination between clients, fabrication, and site works on technical design specifications.

4) Liaise with QP on drawing submissions, approval, and amendments.

5) Prepare documents to submit to the regulatory/ authorities

6) Assist in coordinating QA/QC matters with fabrication dept.

7) Responsible for the up keeping and training of Tekla BIM Software

Prepare Risk Management Plan

1) Plan in advance for any emergency issue

2) Check and ensure the design drawing is accurate before fabrication to avoid re -work

3) Check and ensure the design drawing is accurate before installation on site

Participant in Tender Presentation and Projects Meeting

1) Work closely with Safety dept. for submission of method statements including list of equipment.

2) Attend site survey.

3) Attend progress meetings, discuss and suggest technical proposals.

Train the Technical Team & Innovation in Fabrication Design

1) Train a competent technical team on use of Tekla BIM software

2) Work with Fabrication Dept. to innovate fabrication design.

As work roles evolve over time, company may change your job scope, based on organizational needs and employee abilities, from time to time.

Mandatory Skills

We are looking for candidates who possess a robust understanding of RACF, rather than those primarily knowledgeable in MF application development. Our ideal candidate should demonstrate deep expertise in RACF and its related functionalities.

Responsibilities:

• Manage and drive z/OS Unix (Mainframe Access Management operations and audits).
• Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.
• Automate manual processes through scripting or via zSecure.
• Possess strong knowledge of designing and reviewing RACF access groupings.

Key Requirements:

• At least 8 years of experience working in a z/OS environment including experience with REXX, Assembler, COBOL, JCL, TSO/ISPF
• Install, configure, and upgrade z/OS and subsystems using SMP/E
• Monitoring system performance and perform system tuning
• Technical support for z/OS and subsystems including engagement of IBM and vendors for problem determination and resolution
• Experience with IBM z15 hardware and peripherals, able to perform hardware configuration changes using HCD/IODF
• Experience with system automation and scheduling tools such as IBM System Automation, Netview, IBM Tivoli Workload Scheduler(OPC).
• Familiarity and support of 3rd party software such as FileAid/Expediter, IBM Omegamon, RMF, ChangeMan
• Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA
• Provide process automation support and maintain SOP documentation
• Support backup/recovery and disaster/recovery planning and testing
• Support periodic system configuration reviews and audit reviews
• Strong communication skills and the ability to work collaboratively in a team environment
• Experience with zLinux and zVM will be advantageous
• Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.
• Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.
• Good to have strong experience with using zSecure Admin and zSecure Audit modules.
• Good working knowledge of Access Management lifecycle and processes.
• Experience in banking or financial services institutions preferred

Mandatory Skills

We are looking for candidates who possess a robust understanding of RACF, rather than those primarily knowledgeable in MF application development. Our ideal candidate should demonstrate deep expertise in RACF and its related functionalities.

Responsibilities:

• Manage and drive z/OS Unix (Mainframe Access Management operations and audits).
• Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.
• Automate manual processes through scripting or via zSecure.
• Possess strong knowledge of designing and reviewing RACF access groupings.

Key Requirements:

• At least 8 years of experience working in a z/OS environment including experience with REXX, Assembler, COBOL, JCL, TSO/ISPF
• Install, configure, and upgrade z/OS and subsystems using SMP/E
• Monitoring system performance and perform system tuning
• Technical support for z/OS and subsystems including engagement of IBM and vendors for problem determination and resolution
• Experience with IBM z15 hardware and peripherals, able to perform hardware configuration changes using HCD/IODF
• Experience with system automation and scheduling tools such as IBM System Automation, Netview, IBM Tivoli Workload Scheduler(OPC).
• Familiarity and support of 3rd party software such as FileAid/Expediter, IBM Omegamon, RMF, ChangeMan
• Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA
• Provide process automation support and maintain SOP documentation
• Support backup/recovery and disaster/recovery planning and testing
• Support periodic system configuration reviews and audit reviews
• Strong communication skills and the ability to work collaboratively in a team environment
• Experience with zLinux and zVM will be advantageous
• Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.
• Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.
• Good to have strong experience with using zSecure Admin and zSecure Audit modules.
• Good working knowledge of Access Management lifecycle and processes.
• Experience in banking or financial services institutions preferred

The Senior Mechanical/Thermal Engineer will play a critical role in the design and development of advanced power supply systems. This individual will be responsible for ensuring optimal thermal management and mechanical integrity of our products. The ideal candidate will possess extensive experience in thermal analysis, mechanical design, and a deep understanding of power electronics.

Duties and Responsibilities

Thermal Design and Analysis:

• Perform detailed thermal analysis and simulations using CFD and other relevant tools.
• Develop and optimize thermal management solutions (heat sinks, fans, liquid cooling).
• Conduct thermal testing and validation to ensure performance and reliability compliance.

Mechanical Design:

• Design mechanical components and assemblies for power supply products using CAD software.
• Ensure mechanical designs meet industry standards and regulatory requirements.
• Perform mechanical stress and fatigue analysis to ensure durability and robustness.

Product Development:

• Collaborate with cross-functional teams to develop integrated power supply solutions.
• Participate in design reviews and provide technical guidance for DFM and DFR.

Prototyping and Testing:

• Oversee the fabrication of prototypes and coordinate with testing teams for validation.
• Troubleshoot and resolve mechanical and thermal design issues during the prototype and production phases.

Documentation and Reporting:

• Create detailed technical documentation including design specifications, test reports, and user manuals.
• Present findings and recommendations to stakeholders and management.

Continuous Improvement:

• Stay updated with the latest advancements in mechanical and thermal engineering technologies.
• Identify opportunities for improving product performance, cost-efficiency, and manufacturing processes.

Knowledge, Skills and Abilities

• Understanding of thermal management principles, heat transfer, thermodynamics, and fluid dynamics.
• Familiarity with industry standards and regulatory requirements for mechanical and thermal design.
• Knowledge of manufacturing processes and materials selection for thermal and mechanical components.
• Proficiency in thermal analysis software (e.g., ANSYS, FloTHERM) and CAD tools (e.g., SolidWorks, AutoCAD).
• Strong problem-solving skills with attention to detail.
• Excellent communication and interpersonal skills.
• Ability to create detailed technical documentation and reports.
• Capability to perform detailed thermal and mechanical analysis.
• Ability to collaborate effectively with cross-functional teams.
• Strong project management skills, with the ability to manage multiple projects and meet deadlines.
• Ability to stay updated with technological advancements and apply them to improve product designs.
• Collaborate on hardware designs to optimize cost-effectiveness and manufacturability.

Qualifications

• A minimum of a Bachelor's degree in Mechanical Engineering, Thermal Engineering, or a closely related field is required. This foundational education ensures a strong understanding of the principles of mechanical design and thermal management. A Master’s Degree is preferred but not mandatory.
• Minimum of 7 Years of experience with demonstrated experience in mechanical and thermal design, preferably within the power supply or electronics industry. This experience should include significant exposure to thermal analysis, mechanical design, and the integration of these disciplines in product development.
• Specific experience in the power supply or electronics industry is highly preferred due to the unique thermal and mechanical challenges associated with these products.
• Expertise in using thermal analysis tools such as ANSYS, FloTHERM, or similar CFD (Computational Fluid Dynamics) software. This proficiency is critical for performing accurate thermal simulations and analyses.
• Advance skills in CAD tools such as SolidWorks, AutoCAD, or similar software for mechanical design. This includes the ability to create detailed 3D models, drawings, and specifications.
• Experience in performing mechanical stress and fatigue analysis to ensure the durability and robustness of designs.
• Specific experience with cooling solutions for power electronics, which can include understanding of high power density and high thermal load management.
• In-depth understanding of manufacturing processes and material selection for thermal and mechanical components to ensure cost-effectiveness and manufacturability.
• Strong problem-solving skills and attention to detail.
• Effective communication and teamwork abilities.
• Ability to work in a fast-paced and dynamic environment.

Job Purpose

Provide strong technical expertise and leadership in Process Development of project transfer and start-up. Responsible for the overall Process Optimization of the project. Work closely with team to ensure successful implementation of project. Lead and/or support the team for new product transfer I development, equipment design, processes optimization and qualifications efforts. To ensure compliance to ISO/FDA, cGMPs, HSE regulatory requirements.

Accountabilities

• To lead the overall process development & optimzation aspects of project implementation to deliver results within projected timeline, excellent execution and documentation.

• To ensure detail planning and prioritization of studies based on DS-FMEA in cooperation with SME’s

• To coordinate and ensure execution of planned studies in cooperation with line operation team

• Coordination of required lens measurements under consideration of resources (AS&T, GWS), studies and timeline

• To analyze, evaluate, present and report study results to GWS process development team

• To ensure timely Pre-PQ readiness

• To lead design reviews for processes equipment and work with global/ R&D team to develop and transfer the technology to site.

• To develop and execute equipment and processes validation approach / plan.

• To lead and execute new equipment and processes installation, optimization, commissioning, qualification and validation.

• To proactively communicate project progress, key issues and any other critical topics in a timely manner to the appropriate management level and vendors.

• To ensure compliance to cGMPs, IS013485 / FDA, HSE, and policy requirements.

Requirements

• Education: Minimum Diploma in Engineering (Mechanical, Electrical, Automation)or relevant discipline or equivalent.
• Experience: 5-10 years working experience in contact lens or optical device manufacturing or similar environment.
• Good understanding of processes automation system, vision inspection system, robotics and GMP/GDP requirement.
• Good analytical and troubleshooting skill with systemic approach.
• Good leadership and management skills.

Job Purpose

Provide strong technical expertise and leadership in Process Development of project transfer. Responsible for the overall development of the Molding process. Work closely with team to ensure successful implementation of project. Lead and/or support the team for transfer I development, equipment design, processes optimization and qualifications efforts. To ensure compliance to ISO/FDA, cGMPs, HSE regulatory requirements.

Accountabilities

• To lead the Molding process development aspects of project implementation to deliver results within projected timeline, excellent execution and documentation.

• To lead user requirement specification (URS) development for processes equipment and liaise with vendors on technical discussion.

• To lead design reviews for processes equipment and work with global/ R&D team to develop and transfer the technology to site.

• To develop and execute equipment and processes validation approach / plan.

• To lead and execute new equipment and processes installation, optimization, commissioning, qualification and validation.

• To proactively communicate project progress, key issues and any other critical topics in a timely manner to the appropriate management level and vendors.

• To ensure compliance to cGMPs, IS013485 / FDA, HSE, and policy requirements.

Requirements

• Education: Minimum Diploma in Engineering (Mechanical, Electrical, Automation)or relevant discipline or equivalent.
• Experience: 5-10 years working experience in contact lens or optical device manufacturing or similar environment.
• Good understanding of processes automation system, vision inspection system, robotics and GMP/GDP requirement.
• Good analytical and troubleshooting skill with systemic approach.
• Good leadership and management skills.

Job Purpose

Provide strong technical expertise and leadership in Process Development of project transfer and start-up. Responsible for the overall development of the Extraction process. Work closely with team to ensure successful implementation of project. Lead and/or support the team for new product transfer I development, equipment design, processes optimization and qualifications efforts. To ensure compliance to ISO/FDA, cGMPs, HSE regulatory requirements.

Accountabilities

• To lead the Extraction process development aspects of project implementation to deliver results within projected timeline, excellent execution and documentation.

• To lead user requirement specification (URS) development for processes equipment and liaise with vendors on technical discussion.

• To lead design reviews for processes equipment and work with global/ R&D team to develop and transfer the technology to site.

• To develop and execute equipment and processes validation approach / plan.

• To lead and execute new equipment and processes installation, optimization, commissioning, qualification and validation.

• To proactively communicate project progress, key issues and any other critical topics in a timely manner to the appropriate management level and vendors.

• To ensure compliance to cGMPs, IS013485 / FDA, HSE, and policy requirements.

Requirements

• Education: Minimum Diploma in Engineering (Mechanical, Electrical, Automation)or relevant discipline or equivalent.
• Experience: 8-15 years working experience in contact lens or optical device manufacturing or similar environment.
• Good understanding of processes automation system, vision inspection system, robotics and GMP/GDP requirement.
• Good analytical and troubleshooting skill with systemic approach.
• Good leadership and management skills.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore