Roles & Responsibilities

• Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.
• This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.
• Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.
• Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.
• Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.
• Receives guidance only on new assignment / objectives and special / complex features.
• Perform duties as per directives of reporting authority.
• Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Instrumentation & Control System Sow
• Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.
• Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.
• Prepare & Review of company development work methodology / procedures.

NATURE OF THE JOB

Principal activities of this job are analyzing customer’s problems, collecting and recording product and technical information, to summarize findings, to report product troubles as well as contractual troubles on each assignment. Further, to direct the assigned labor force, which may be Elliott's own labor, customer supplied or contracted and to ensure that equipment is built to the required standards and procedures relating to installation, commissioning, start-up, repair or maintenance work of customer's equipment.

SPECIFIC JOB RESPONSIBILITIES /COMPETENCIES

• Ensures all work is performed in a safe manner to prevent injury to personnel or equipment, i.e. ensures that safety, quality and schedule are obtained.
• Adheres to instructions and guidelines as described in the quality and HSE management systems.
• Can be asked to assist in the quotation process for minor projects.
• Handles and coordinates technical issues of a project, such as installation, commissioning, trouble shooting or maintenance.
• Schedules and allocates personnel and material to execute work scopes, plans and prepares minor projects.
• Performs safety planning and detailing on minor projects as well as the technical job preparation and planning.
• Conducts investigations of product trouble including performance problems and takes corrective action as directed by the Field Service Manager/Senior Service Engineer. May exercise independent judgment and corrective action plan depending on the nature of the trouble and availability of communication lines.
• Provides technical direction and assists Field Service personnel on other assignments as directed.
• Supervises, directs and controls customer personnel, hired labor and Service Representatives in the installation, start-up, repair or maintenance of equipment.
• Participates in the training of customer’s and own personnel.
• Issues work method statements.
• Conducts experimental programs for development of modifications to field equipment.
• Acts in Site Manager capacity while directing work on Elliott equipment as well as on non-Elliott equipment. Makes customer courtesy calls to check inventories and promote the sale of parts, inspect new shipments, and sell service in conjunction with the Service Sales Engineer.
• Keeps Field Service Manager/Support Engineers promptly and thoroughly informed on all work performed, quality, performance and equipment problems, customer’s reaction to equipment, and future sales potential.
• Keeps installation back charges from customers and/or mechanical contractors on a minimum through good judgment and prompt action.
• Responsible for contributing new ideas to improve product design and appearance, enhance company service, and eliminate troubles.
• Issues Service Reports promptly and completely noting particular instances with dates and names of persons connected with these events.
• Promotes customer good will through effective communication and cooperation with customer’s personnel.
• Assists in resolving Elliott’s liability in failure claims or checks validity of customer’s claims.

Principal Software Engineer, Network Technology - Singaporeans only

Location: International Business Park

Job Description

We are seeking highly talented Software Engineer, Network Technology with experiences in developing

application or middleware on embedded system (automotive ECU system is preferable) for connectivity and

network functions.

Job Responsibilities

• Design and develop protocol stacks for Vehicle Network/Communication functions or systems

(including but not limited to Ethernet, CAN, LIN, FlexRay, Optical related.)

• Develop subsystem prototyping such as DoIP and SOME/IP stack based ecosystem.

• Lead or participate in product software architecture definition and design which meet automotive OEM

requirement.

• Ensure and carry out forward design process and document quality according to V model to fulfil

stringent automotive industrial ISO standard.

• Implement software programming to realize defined architecture & design.

• Behave independently as technology domain representative for internal and external customers.

Preferred Skills and Experience Requirement

• Strong capability in independent thinking, self-motivation and innovative thinking.

• Deep understanding of network layer components such as IPv4, IPv6, routing, forwarding, TCP/IP.

• Deep knowledge in applying C, C++, JAVA or other scripting for different embedded system

development.

• 8 years' experience in the embedded system development, ARM processor, preferably in automotive

industry.

• Knowledge of software development using embedded C, C++, C#

• Knowledge of OS, data structures and algorithms.

• Knowledge of streaming media protocol and AVB.

• Knowledge of Real-time operating systems (RTOS), Linux, Android Auto or QNX will be added

advantage.

• Experience in developing time-critical functions in embedded systems.

• Proficiency with network monitoring protocols and tools.

• Knowledge of security engineering (building secure systems), Operating Systems and network security,

common attack patterns and exploitation techniques.

• Knowledge of system security analysis techniques such as threat modelling, attack trees etc.

• Excellent written and verbal communication skills.

• Experience with Automotive industrial protocols will be added advantage.

Qualification

• Bachelor's degree or above in Information Security, Electronic, Computer Engineering, Computer

Science or related field

Working Hours:

Monday to Friday

9am to 6pm

Salary :

$4500 to $8500 per month

A Tech Lead with expertise in both software development and DevOps practices. Will play a pivotal role in guiding our development and infrastructure teams, ensuring the successful delivery of software projects while implementing efficient DevOps processes.

If you are passionate about leading teams, driving innovation, and bridging the gap between development and operations, we encourage you to apply. Lead and manage a team of Senior Software Developers and DevOps Engineers, fostering collaboration and high performance Oversee the design and implementation of Continuous Integration (CI) and Continuous Deployment (CD) pipelines automating build, test, and deployment processes Collaborate with cross-functional teams to define and optimize DevOps strategies and workflows.

• Mentor and guide teams in adopting best practices for software development and DevOps, including code quality, security, and scalability.
• Identify and mitigate risks related to software delivery and operations, ensuring compliance with industry standards and regulations
• Collaborate with stakeholders to gather requirements, provide project updates, and address technical challenges.
• Stay up to date with industry trends, emerging technologies, and DevOps practices to drive continuous improvement.
• Lead and participate in the internal hiring process of suitable candidates from the tech industry, inclusive of assessment and decision-making.

Job Responsibilities:

• Attend to sales enquiries, quotations and responding to customer enquiries.
• Manage RFQ, review quote package, generate accurate and detailed quote summary for review.
• Liaise with purchasers on cost involving on the sales enquiries or quotations.
• Follow up with customers regarding quotations.
• Collaborate with internal resources to identify the make/buy logic for the bill of materials.
• Apply work knowledge to improve quote formats and output efficiency.
• Others ad-hoc duties may be assigned.

Requirements:

• Nitec/Higher Nitec or Diploma in Mechanical/Precision Engineering.
• Proficient in Microsoft Excel.
• Familiarity or experience on CNC machining or precision engineering environment preferred.
• Well verse in Microsoft Office.
• Able to interpret mechanical/technical drawings, bill of materials, specifications and Geometric dimensioning and tolerancing (GD&T).
• Familiar with CNC metal machining process like turning and milling etc.
• Pleasant personality and able to communicate well with customers for their request.
• Meticulous, excellent with details.
• Knowledge of SAP is an advantage.

• Responsible for managing the operational requirement, troubleshooting and continuous improvement projects on Spray Dryers, Evaporators, and other related equipment in compliance to Abbott quality standards.
• Responsible for compliance with applicable Corporate and Divisional Policies and Procedures Initiates and completes technical activities leading to new or improved products or process, for current programs, next generation program and to meet strategic goals and objectives of the company
• Prepares reports publishes and makes presentations to communicate findings Partner with Engineering on the installation, modification, upgrade and maintenance of manufacturing equipment Implement, document and maintain controlled, repeatable production processes
• Create and upgrade equipment or process operating procedures to be used by manufacturing personnel Development of qualification and validation protocols
• Participate in and/or lead qualification and validation activities Interface with other departments and suppliers to address root causes Incorporate business policies and procedures into task completion Understand the business needs of the company and has knowledge of the customer needs of our business Cultivates internal and external network of resources to complete tasks Ant other duties as assigned by supervisor

Requirements:

• Knowledgeable in Spray Dryer and Evaporator Technologies. 2 to 5 years of related experience (Manufacturing/Process) in a manufacturing facility that uses Spray Dryer and Evaporator process equipment, preferably in Food/Pharmaceutical industry.
• Bachelor's degree in chemical or mechanical Engineering or in related disciplines Knowledge in SAP system/ Project Management skills
• Able to make fast decision and react efficiently to situation Understands engineering principles, theories, concepts, practices and technique

Roles & Responsibilities

Job Description

• To plan, execute, manage, control and issue the ICSS engineering deliverables and deliver the ICSS package of the assigned project within the defined technical requirements, schedule, cost and quality so as to deliver the project successfully
• Understand the ICSS design basis, project requirements including HSSE, scope, cost, schedule, quality requirements, client and class requirements and project execution philosophy.
• Plan, lead and manage ICSS team resources by identifying the work assignment for each team member in coordination with Project Lead I&C Engineer
• Plan, lead and manage the ICSS deliverables as per project requirements
• Direct and manage project work including issue of deliverables within schedule and quality
• Provide technical expertise on solving system engineering problems, monitor and control the project work by closely communicating with the team
• Identify improvement opportunities and innovative ideas
• Guide the ICSS team on change management control, anticipate the technical issues and take preventive action to mitigate the risk.
• Closely coordinate with the team, project lead I&C engineer, inter-discipline communication, internal and external stake holders

Job Description

Sub Contractor firm seeking for Quality Assurance & Quality Control (QA/QC) engineer.

Job Responsibilities

1. Good standards and understanding construction quality assurance
2. Perform checks on the structural, architectural or material / works in steel, extrusion, metal (mild steel / stainless steel / aluminium), glass and aluminium sheet related to ensure that the final touch-up works are ready for inspections.
3. Coordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice.
4. Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.
5. Prepare Quality Control Plan, procedures, and QA/QC reports.
6. Conduct periodic training for site personnel and subcontractor’s workers where necessary.
7. Identify, feedback and provide corrective actions in areas of quality control and quality standards.
8. Gaining an understanding of main-con needs and requirements and communicating to them and the quality standards to the production teams.
9. Devise ways to improve the manufacturing process to ensure higher-quality goods.
10. Improve and review new specifications and procedures for products or processes.
11. Set the requirements for raw materials from suppliers and monitoring their compliance.
12. Ensure legal obligations are followed and ensuring compliance with regulatory bodies and with health and safety guidelines.
13. Inspect the final output, comparing it to the requirements, and approving or rejecting the final products.
14. Keep accurate documentation and performing statistical analysis.
15. Identify and resolve workflow and production issues.
16. Document QA/QC activities and creating audit reports.
17. Create training materials and operating manuals to ensure consistent quality.

Job Requirements

• Degree / Diploma in Civil Structural Engineering or its equivalent.
• Minimum 2 years relevant experience in Metal work and Facade industry.
• Knowledge of welding inspection and ISO Standards, familiar with CONQUAS, Green Mark and others essential BCA requirement.
• Strong attention to detail, observation, organizational, and leadership skills.
• In-depth knowledge of quality control procedures and legal standards.
• Working knowledge of tools, methods, and concepts of quality assurance.
• Good communication skills, both verbal and written.
• Willing to travel to various sites.

Job Responsibilities:

• Attend to sales enquiries, quotations and responding to customer enquiries.
• Manage RFQ, review quote package, generate accurate and detailed quote summary for review.
• Liaise with purchasers on cost involving on the sales enquiries or quotations.
• Follow up with customers regarding quotations.
• Collaborate with internal resources to identify the make/buy logic for the bill of materials.
• Apply work knowledge to improve quote formats and output efficiency.
• Others ad-hoc duties may be assigned.

Requirements:

• Nitec/Higher Nitec or Diploma in Mechanical/Precision Engineering.
• Proficient in Microsoft Excel.
• Familiarity or experience on CNC machining or precision engineering environment preferred.
• Well verse in Microsoft Office.
• Able to interpret mechanical/technical drawings, bill of materials, specifications and Geometric dimensioning and tolerancing (GD&T).
• Familiar with CNC metal machining process like turning and milling etc.
• Pleasant personality and able to communicate well with customers for their request.
• Meticulous, excellent with details.
• Knowledge of SAP is an advantage.

As a Software Engineer in D-SIMLAB, you will get exposure in both technical and soft skills development. The role does not limit to only software development, but also involves in providing professional consultation services to customers, with the following key responsibilities:

Work together with a team of highly skilled Software Engineers and Data Scientists in software product deployment and delivery at world leading semiconductor manufacturers.
Actively involved in product enhancement (in the area of visualization and algorithms) which improves the quality of D-SIMLAB product.
Responsible for key software components development.

We are looking for candidates fulfil the following criteria:

Bachelor/Master Degree specialises in Computer Science/Engineering or Industrial Engineering.
Diploma holders with relevant experience are encouraged to apply.
Enjoy working with experts with different cultural and technical backgrounds.
Love to travel the world and work on challenging projects.
Interest in career progression by strengthening your technical and soft skills.

Roles:

-Interpretation and analyze of production drawings & documents.

-Implementing best fabrication / machining practices and techniques to develop and maintain efficient processes to achieve productivity, quality and safety.

-Planning of project and management of the project team to keep project on schedule and budget.

-Handle all day-to-day issues and troubleshooting problems as they arises finding efficient and effective solutions.

-Estimate costs for quotation preparation.

-Coordinate and work closely with management, customers, contractors and suppliers.

-Maintain good customer relationship.

-Perform other duties as assigned to ensure success of project and company objectives.

Requirements:

-NItec / Diploma in Mechanical / Manufacturing Engineering or related.

-At least 5 years experience in metal fabrication and machine shop activities.

-Self-motivated and result-driven mindset

-Great communication and interpersonal skills

Detail:

• Location: Jurong Island, Singapore (Transport provided at designated point)
• Employment Type: Permanent  
• Compensation: Competitive Salary with AWS and 3 Months Variable Bonus  

Responsibilities:

• Oversee maintenance and instrumentation activities in manufacturing plants to ensure safe and smooth operations.
• Coordinate and execute major field maintenance projects, prioritizing worker safety and facility integrity.
• Liaise with internal and external stakeholders to coordinate maintenance activities, ensuring timely completion and minimal disruption to plant operations.
• Conduct instrumentation application studies and modify plant facilities to align with technical specifications and business requirements.
• Conduct training sessions for staff and contractors to enhance their skills and competencies.
• Implement management systems based on ISO 9001, ISO 14001, and SS506 standards.

Requirements:

• Bachelor's degree in Electrical Engineering with a focus on Power/Energy Modules.
• Basic knowledge of programmable logic controllers (PLC) and human-machine interfaces (HMI) is advantageous
• Strong analytical and problem-solving skills.
• Ability to communicate effectively with staff across different functions and contractors. A spirit of collaboration and teamwork is essential.

How to Apply:

Interested candidates are invited to forward their CVs in MS Word format to [email protected]

Reg No: R1549345
Triton AI Pte Ltd  
License No: 21C0661

Responsibilities:

• Lead a group of Production Technicians in the safe and smooth running of the production.
• Assist the Process Engineer to conduct activities and projects to optimize operation during Shift to achieve operational and cost efficiency.
• Troubleshoot plant/equipment/quality issues and recommend countermeasures.
• Monitor and ensure plant equipment integrity and reliability.
• Assist the Process Engineer to support Shift operation by providing suitable operating conditions for stable plant operation and product quality control.
• Train and develop team members

Requirements:

• Degree in Chemical Engineering or its equivalent, preferably with 1 to 2 years of experience in petroleum, chemical or polymer industries.
• Have knowledge of process control and troubleshooting, hands on knowledge of plant equipment and instrumentation.
• Essential prerequisites include good analytical and technical report writing skills, ability to be a team player with leadership, initiative, drive & commitment, able to take pressure and able to communicate well with others.
• This is a shift work position (i.e. Rotating AM and PM shifts, including weekends and Public Holiday) and there will be scheduled off days

Interested candidates can forward their CVs in MS Word format to alex#triton-ai.com

Reg No. R1549345

Triton AI Pte Ltd

License no. 21C0661

Job Description:

- Plan manufacturing processes related to machining and composite manufacturing

- Design jig and fixture for manufacturing processes

- Draft out Risk Assessments for all manufacturing processes

- Liaise with sub-contractor and customer on technical requirements

Job Requirements:

- Degree/ Diploma in Mechanical Engineering

- Knowledge on solidwork CAD

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

Job Responsibilities:

• Develop & implement QMS system & take the lead of continuous improvement process & initiatives
• Provide root cause analysis & preventive action plans to resolve non-compliance issues
• Analyze internal & external data to identify areas for improvement & communicate with relevant parties for quality improvements
• Ensure the compliance with ISO 9001 & all relevant standards to both internal company policies & customer standards

Requirements:

• Diploma in Mechatronic, Electronic Engineering or equivalent or
• 3 years Quality experience in Service/Maintenance/Repair industry
• Possess good knowledge of ISO 9001, QA methodologies & tools
• Good communication & interpersonal skills

PT Trakindo Utama Singapore Branch is expanding! The Power Systems department is looking for two exceptional project engineers to bolster the department's capabilities! Aspiring applicants can look forward to a dynamic career, engaging stakeholders on all aspects of their electrical needs, and to exercise their creativity and robustness in delivering solutions and customizations! Our office is located just 6 minutes away from Tuas Crescent MRT, within walking distance from the MRT Exit.

We invite aspiring applicants to join our team, and experience the prestigious legacy of our Company, let's advance forward together!

Primary Objective of Position

• Responsible for all electrical aspects and management of projects, including tendering, design, drawing, scheduling, purchasing, testing, packing, shipment and commissioning of power generation sets on site.

Duties & Responsibilities

• Coordinate all electrical interfacing of designated projects to meet specifications
• Instruct draughtsperson to prepare electrical drawings for tender replies and awarded projects according to customers' specifications
• Review returned drawings and modify as required for construction
• Coordinate with contractors on genset build up
• Provide specifications for control panels, generators and switchgears to vendors
• Liaise with vendors for quotations to procure/fabricate
• Coordinate with Parts Dept on order for CAT parts
• Assist with final technical inspections and testing of equipment
• Prepare packing list and coordinate with HPL on packing, delivery and shipment
• Perform on site commissioning as and when required
• Prepare project costing and report to the Project Manager
• Attend/Conduct engineering and project meetings both in Singapore and overseas (when required)
• Perform calibration of electrical items
• Assist in review and update of department procedures and manuals
• Fulfill other adhoc duties as assigned by Management

Person Specifications

• Possess a degree in Electrical/Power Engineering or 2 years of related experience in Power Generation Engineering and/or Project Management
• Proficient in Microsoft Office applications
• Knowledge in electrical aspects of power systems and control panels

Role Overview

We are seeking an experienced Software Developer with atleast years of experience in the field. The ideal candidate will be a seasoned professional with a track record of delivering complex software solutions and leading technical teams. In this role, you will be responsible for driving the development of innovative and robust software applications, mentoring junior team members, and contributing to strategic technical decisions.

Key Responsibilities:

• Lead the design, development, and implementation of complex software solutions.
• Mentor and guide junior developers, fostering a culture of technical excellence.
• Collaborate with cross-functional teams to define and achieve software objectives.
• Oversee the entire software development lifecycle, from conception to deployment.
• Ensure the creation of scalable, efficient, and maintainable code.
• Manage and prioritize project deliverables and timelines.
• Conduct code reviews and enforce quality standards.
• Stay abreast of emerging technologies and industry trends, and incorporate them into projects where appropriate.
• Troubleshoot, debug, and upgrade existing systems.
• Engage in hands-on development of critical software components.
• Provide technical leadership in architectural discussions and decision-making.

Eligibility Criteria:

• Bachelor’s or Master’s degree in Computer Science, Engineering, Technology or a related field.
• 5+ years of experience in software development, with a demonstrated history of technical leadership roles.
• Expertise in programming languages and technologies.
• Strong understanding of software architecture, design patterns, and best practices.
• Proven experience in leading large-scale software development projects.
• Proficient in Agile methodologies and software development lifecycle management.
• Excellent problem-solving, communication, and leadership skills.
• Experience in mentoring and coaching junior developers.

Role Overview

We are seeking an experienced Senior Software Developer with 10+ years of experience in the field. The ideal candidate will be a seasoned professional with a track record of delivering complex software solutions and leading technical teams. In this role, you will be responsible for driving the development of innovative and robust software applications, mentoring junior team members, and contributing to strategic technical decisions.

Key Responsibilities:

• Lead the design, development, and implementation of complex software solutions.
• Mentor and guide junior developers, fostering a culture of technical excellence.
• Collaborate with cross-functional teams to define and achieve software objectives.
• Oversee the entire software development lifecycle, from conception to deployment.
• Ensure the creation of scalable, efficient, and maintainable code.
• Manage and prioritize project deliverables and timelines.
• Conduct code reviews and enforce quality standards.
• Stay abreast of emerging technologies and industry trends, and incorporate them into projects where appropriate.
• Troubleshoot, debug, and upgrade existing systems.
• Engage in hands-on development of critical software components.
• Provide technical leadership in architectural discussions and decision-making.

Eligibility Criteria:

• Bachelor’s or Master’s degree in Computer Science, Engineering, Science, Technology or a related field.
• 10+ years of experience in software development, with a demonstrated history of technical leadership roles.
• Expertise in programming languages and technologies.
• Strong understanding of software architecture, design patterns, and best practices.
• Proven experience in leading large-scale software development projects.
• Proficient in Agile methodologies and software development lifecycle management.
• Excellent problem-solving, communication, and leadership skills.
• Experience in mentoring and coaching junior developers.

• Your primary responsibility is to provide technical assistance and support to end-users within the organization.
• Your role involves resolving hardware and software issues related to desktops, laptops, and other IT peripherals.
• You will be tasked with installing, configuring, and maintaining computer systems and ensuring they operate efficiently.
• Additionally, you'll assist users with technical inquiries, troubleshoot problems, and escalate issues when necessary.
• Provide remote assistance for off-site users using remote desktop tools.
• Assist users with login issues, password resets, and access-related queries
• Your goal is to ensure a smooth and productive computing environment for all employees, contributing to the overall efficiency of the organization.

• Strong understanding of desktop operating systems (Windows, macOS).
• Knowledge of desktop hardware components and peripherals
• Install and configure desktop operating systems, applications, and software updates.
• Set up and troubleshoot hardware components.
• Excellent troubleshooting skills to diagnose and resolve technical issues.
• Ability to analyze and solve hardware and software problems efficiently.
• Ability to collaborate with other IT professionals and support teams.
• Share knowledge and contribute to the overall IT support function.
• Familiarity with remote desktop tools for providing off-site support

#techsupport #desktopsupport #itsupport #ittechnician #l1support #l1desktopsupport #technology #tech

Roles & Responsibilities

· Estimation and budgets for project execution (Steel, Façade works)

· Monitor and review master construction program.

· Adheres to time, cost and quality as specified while complying with relevant regulatory and legislative requirements.

· Prepare construction progress reports based on contractual terms on time, cost and quality

· Communicate across disciplines and construction teams to maintain high quality assurance and control standards

· Review documents such as purchase orders, works orders, work completions report in order to compute billing and charges due.

· Conducting Production & Management Meeting.

· Coordinates between Main-con / sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.

· Analyse and interpret market data regularly and execute monthly business reports to empower the business with valuable information to make decisions.

· Adherence to safety practices in the work place.

·

Requirement

· Min 10 years relevant working experiences

· Excellent interpersonal and communication skills.

· Able to work in Night shifts and Sunday / PH on request.

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently offer the following position in our office in Singapore which will be hybrid.

Senior Software Test Engineer

Your Responsibilities

• Ensure processes used for system testing are adequate and appropriate.
• Develop manual test procedures.
• Work closely with the development team to ensure that Leica Microsystems products meet (and exceed) end user expectations.
• Develop and maintain software system and user acceptance tests and scripts based on product requirements.
• Procure, create and manage test data required.
• Executing software system and user acceptance tests and producing test logs and issue reports.
• Management of test coverage to ensure all requirements are adequately tested.
• Participate in troubleshooting and triaging of issues to generate root cause identification and resolution.
• Support development of automation testing routines in different programming languages (eg. As C#) using appropriate tools (eg. B. SpecFlow) to achieve a more efficient testing process of software.
• Comply and adhere to company Quality Management System and Environment, Health & Safety requirements. (For all except Top Management, Managers and Supervisors).
• Ensure the department operates under the Quality Management System and Environment, Health & Safety (EHS) requirements and to address EHS issues raised by associates (For Top Management, Managers and Supervisors).

Your Profile

• Bachelor or master’s in engineering or science. Good knowledge of methods for software - verification. Good knowledge of at least one high-level language (programming language). User knowledge of automatic testing tools.
• Experience in device/embedded software testing.
• Knowledge of software development methodologies preferably Scrum or other agile methodologies, and software test methodologies.
• Be excited about collaborating and communicating closely with teams and other stakeholders via a distributed model to regularly deliver solutions.

What We Offer

• Equal pay is a given for us.
• Learn all there is about Kaizen, PSP's and Muda as part of our Danaher Business System (DBS) trainings - if you believe in continuous improvement like us
• We have no room for prejudices and stereotypes. We promote equal opportunities, diversity and inclusion.
• We offer a balance between support and autonomy to achieve your own goals in an international environment.

At Leica Microsystems we believe in designing a better, more sustainable workforce. We recognize the benefits of flexible, hybrid working arrangements for eligible roles and are committed to providing enriching careers, no matter the work arrangement. This position is eligible for a hybrid work arrangement in which you can work part of the time at the Company location identified above and part of the time remotely from your home. Additional information about this hybrid work arrangement will be provided by your interview team. Explore the flexibility and challenge that working for Leica Microsystems can provide.

Get More Insight

Learn more about what we do and who we are by watching our company video “We Are Leica”: https://www.youtube.com/watch?v=1zHmalqMXN4

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

The roles is primarily responsible for maintaining the plant automation system, ensuring latest program & software backups are archived & readily available for all Programmable Electronic Systems (PLCs, HMIs, SCADA, VFDs etc), Calibrations are done in time, any changes to automation systems are approved and tracked through change control process , critical automations spare parts are available, automation maintenance & calibrations are carried out with in allocated budget & also supporting the automation Design, development , implementation & validation of new automation systems including digital factory & digital asset security initiative.

Responsibilities:

• Support BIS, Operations and Maintenance groups throughout the organization as an escalation point for technical issues and advice related to plant automation, instrumentation & control systems.
• Support any projects / capex involving automation by directing and monitoring vendor activities including design, development and testing; evaluate vendor documents including System Design Specifications.
• Maintain operational as-built and operating documentation for plant control system infrastructure.
• Manage contracts and vendors related to plant automation support.
• Ensure automation systems comply with regulatory guidelines. Maintain the validated status of production equipment and associated control systems, in accordance GMP requirements
• Leads projects, when assigned, including developing conceptual design, scope of work, project schedules, and status reports. When appropriate, conducts project design review and/or status meetings for sponsoring departments and management.
• Develop a detailed understanding of Plant Automation systems including Rockwell Allen Bradley PLCs (Compact Logix, Control Logix, etc.) , Panel View, Wonderware ArchestrA & Intouch, Wonderware Historian, SQL database, EtherNet/IP , FTAC, Power Flex VFDs & any other control systems installed at site.
• Provide necessary training to Engineers and Technicians as required.
• Ensure latest backups and crash recovery procedures are updated and tested to recover any Programmable Electronic System (PLCs, HMIs , SCADA, VFDs, Controllers etc) in case of a crash / failure.
• Maintain the as built plant automation system architecture, list of all automation assets (PLCs, HMIs, VFDs) & passwords.
• Through the change control process ensure that changes carried out on the Automation Systems do not compromise the safety, environmental or quality stance of the plant.
• Review Validation documentation (FAT, IQ/OQ etc.). Assist with qualification and validation activities as required.
• Manage the site Calibration Program as per Global Calibration standard guidelines. Ensure that calibration master list is aligned with all stake holders, kept updated for any new projects and calibrations completed in time
• Work closely with the Global Automation Manager to deliver compliance with Global Automation Standards including asset inventory and life cycle management of OT assets.
• Other Ad Hoc duties

Pre-requisites:

• Engineering degree or equivalent with minimum 5 years of industrial automation experience preferably in operations / manufacturing environment, with proven track record of delivery of high impact technology solutions & managing manufacturing automation systems.
• Experience with Allen-Bradley (Rockwell) ControlLogix PLCs , PanelView HMI & Powerflex VFDs ; Wonderware InTouch , Historian & Archestra would be preferred.
• In depth knowledge of Ethernet and other network based I/O systems preferred.
• Knowledge of machine safety requirements & ATEX preferred.
• Demonstrated success in project management and leadership of cross-functional teams.
• Experience of working with SAP for Calibrations and spares management would be a plus.
• Strong written and verbal communication and computer skills required.
• Demonstrated history of positive interpersonal skills showing courtesy, tact, and understanding in interactions with co-workers.
• Ability to work on own initiative, self-motivated.
• Sound communication and stake holder management skills.

We regret that only shortlisted candidate will be notified.

• Your primary responsibility is to provide technical assistance and support to end-users within the organization.
• Your role involves resolving hardware and software issues related to desktops, laptops, and other IT peripherals.
• You will be tasked with installing, configuring, and maintaining computer systems and ensuring they operate efficiently.
• Additionally, you'll assist users with technical inquiries, troubleshoot problems, and escalate issues when necessary.
• Provide remote assistance for off-site users using remote desktop tools.
• Assist users with login issues, password resets, and access-related queries
• Your goal is to ensure a smooth and productive computing environment for all employees, contributing to the overall efficiency of the organization.

• Strong understanding of desktop operating systems (Windows, macOS).
• Knowledge of desktop hardware components and peripherals
• Install and configure desktop operating systems, applications, and software updates.
• Set up and troubleshoot hardware components.
• Excellent troubleshooting skills to diagnose and resolve technical issues.
• Ability to analyze and solve hardware and software problems efficiently.
• Ability to collaborate with other IT professionals and support teams.
• Share knowledge and contribute to the overall IT support function.
• Familiarity with remote desktop tools for providing off-site support

#techsupport #desktopsupport #itsupport #ittechnician #l1support #l1desktopsupport #technology #tech

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work