Job description

Summary: Hardware Test Engineer with experience in medical device system integration testing.

Responsibilities:

1. Deliverables for pre-Design Verification Phases:

a. Test fixtures design & fabrication with external supplier(s)

b. Test method validations

c. Preparation of hardware for software V&V and system functional testing

d. Support Electrical Design Engineers with preliminary electrical safety and EMC testing at external accredited test lab and documentation of results

2. Deliverables for Design Verification Phase:

a. Design Verification test protocols

b. Design Verification test execution and reports

c. IEC 60601-1 and IEC 60601-1-2 Testing & Certification with external accredited test lab

3. Work closely with hardware engineers and firmware developers

4. Issue Logging and Traceability management

Education: Electrical/Electronic Engineering, Dip/Deg

Experience: Min. 3 Years’ Experience with Medical Device Electrical System Integration Testing and Documentation

Competences: Expected

1. Experienced in regulatory standards related to electrical medical devices, such as IEC 60601-1, IEC 60601-1-2, IEC 60601-2-18, YY/T 9706, etc.

2. Proficient in using electrical laboratory equipment (oscilloscope, function generator, dataloggers, etc.)

3. Clear evidence of creative problem solving by use of tools and the tenacity and ability to overcome obstacles.

4. Experience working with software V&V engineers on integrated systems.

Preferred

1. Experience with schematic and layout tools

2. Experience with RF generating devices.

Job Description:

We are seeking an experienced IT System/Infrastructure Engineer with a strong focus on system, storage, backup and virtualization. The candidate will be responsible for day-to-day support and deployment and maintenance of new systems and infrastructure. In additional, he/she will be involved in pre-sales and deal pursuit, where required.

Key Responsibilities:

• Install, configure, test and commission servers, storage, network devices, operating systems, application software and management tools.
• Oversee the day-to-day operation of the servers, networks, and related infrastructure and services.
• Monitor, troubleshoot and remediate issues impacting the operation of the installed systems and infrastructure to ensure the highest level of service availability.
• Maintain quality documentation on area of responsibility.
• Work on activity planning and implementation for new setup.
• Develop and/or review technical solutions in support of pre-sales/deal pursuit, as needed.

Qualifications/Training:

• Possess a Degree in Computing, Computer Science/Engineering or IT
• Relevant technical and professional certifications are preferred.

Experience/Skills:

• 5 to 8 years of related working experience.

What you will do:

Conducts complex preventive maintenance, repair, replacement, installation and commissioning under minimal supervision. Interfaces directly with clients to ensure high levels of satisfaction. Manages assigned work to meet professional and efficient execution of time and customer satisfaction.

How you will do it:

• Carry out service, maintenance, commissioning, overhaul, trouble-shooting, installation, warranty repair and any other specialist service on the complete range of JCI and other manufactures Process and Industrial refrigeration equipment.
• Carry out comprehensive plant audit for Industrial and Process refrigeration systems and write detailed report explaining the plant condition, observations and recommendations
• Travel throughout the South East Asia and other regions shore and off shore as required by the business in order to service the customer base
• Carry our service work to the highest possible standard in line with JCI policy & procedures and industry recognised best practices.
• Ensure service work is completed safely and efficiently at all times with minimum call back and warranty expense
• Ensure service reports are completed fully and to a good standard on completion of each service order or in cases where the duration of the work is in excess of one week, service reports must be submitted on a weekly basis
• During your day to day work in the field, actively identify and promote new/additional services, parts and products to our customers and feedback either verbally or via your service report of potential opportunities to the relevant person in the service office
• Supervise subcontractors working on behalf of JCI
• Maintain service vehicle and any other tools and/or equipment assigned to you in good condition
• Ensure the continued and sustainable growth of our maintenance base through customer relationship building with new and existing customers
• Ensure the highest standard of safety are maintained at any job site at all time including but not limited to JCI staff.
• Perform any other duties from time to time, whether ad-hoc or otherwise, as assigned by your superior or management
• Ability to work in harsh, chemical laden environment under the sun.
• Ability to work on standby with 24 hours call out situation.
• Ability to be on overseas assignment for more than 1 month.

What we look for:

• 5 years and above experience in HVAC&R industry
• Industrial & Process Refrigeration products and systems knowledge
• Screw, Centrifugal and Reciprocating compressor knowledge
• PLC and microprocessor controls knowledge
• ASHRAE standards
• Refrigerants
• Health & Safety
• PC skills – MS Office (Excel, Words, Powerpoint), Email
• Valid driving license

Manufacturing Engineer

We are looking for experienced full-time Manufacturing Engineer to provide technical support and advice to Manufacturing Technicians on new programs and/or ongoing program enhancements. Develop and conduct tests to enhance manufacturing processes, monitor and compile test data, perform problem solving and provide technical support to resolve technical issues.

Roles and Responsibilities:

• Build new Manufacturing Job Instruction Sheets (JIS), NC program, and Tool/Gauge plan with Siemens NX.
• Establish manufacturing procedures and proper documentation control.
• Initiate productivity improvement activities including equipment/fixture selection, design and deployment.
• Resolve technical issues relating to internal and external customers' feedback.
• Perform feasibility studies in the manufacturing capacity improvement, layout improvements and expansion.
• Initiate continuous improvement activities to existing manufacturing system and its related processes.
• Participate actively in company-wide productivity and quality programs.
• Put up justification for capital expenditure (CAPEX).

Qualification and skills:

• Diploma in an Engineering discipline with at least 2 years of relevant working experiences.
• Strong understanding and hands on with precision machining tool (CNC 5-Axis / lathe / milling etc.).
• Team player and able to work closely with other teams on cross-functional projects.
• Competent in Unigraphics and/or other CAD/CAM applications.
• Good analytical, communication and interpersonal related skills.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description:

• Manage and maintain Windows servers, including installation, configuration, and troubleshooting.
• Oversee Active Directory services, including user and group management, GPO implementation, and security best practices.
• Develop and maintain PowerShell or other scripting solutions for automation and system management tasks.
• Experience with VMWare and VDI Horizon for virtualization and desktop infrastructure management.
• Familiarity with AWS GCC (Government Cloud) for cloud infrastructure management and security compliance.
• Monitor system performance and implement necessary adjustments to ensure efficient operation.
• Collaborate with other IT teams to support infrastructure projects and resolve technical issues.
• Implement and maintain security measures to protect systems and data

Requirements:

• Proven experience as a Windows Administrator or similar role.
• In-depth knowledge of Windows Server operating systems and Active Directory services.
• Proficiency in scripting languages such as PowerShell, VBScript, or batch scripting.
• Experience with VMWare and VDI Horizon for virtualization and desktop infrastructure management.
• Familiarity with AWS for cloud infrastructure management and security compliance.
• Familiarity with system monitoring tools and techniques.
• Strong problem-solving skills and the ability to work independently or in a team.Excellent communication and interpersonal abilities.
• Relevant certifications such as MCSE, MCSA, or CompTIA Server+.
• Experience with cloud platforms such as Azure or AWS

Job Description:

• Collaborate with backend and algorithm engineers to conceptualise and build high-performance and scalable machine-learning solutions
• Develop infrastructure, tooling, and frameworks to contribute to one of the following projects:

1. Vector search and indexing
2. Machine learning model serving
3. Data ingestion and retrieval

Requirements:

• Bachelor's degree in computer science or related technical discipline
• In-depth understanding of computer science fundamentals (data structures and algorithms, operating systems, networks, databases, etc)
• Strong and hands-on experience with at least one of the following programming languages: Go, C++, Java following programming languages: Go, C++, Java

Skills below are optional but preferred:

• Experience in developing and deploying machine learning-related backend services
• Experience in design and development of large-scale distributed systems
• Experience in big data pipelines (Hadoop, Spark, Flink)
• Experience in one or more model serving frameworks (Tensorflow Serving, TensorRT, NVIDIA Triton Inference Server)

Job Responsibilities:

• Responsible for deployment, maintenance, upgrade, and support of ICT infrastructure, including but not limited to:

-Firewalls

-Network

-Windows Servers

-Virtualization (VMWare/Hyper-V)

-Storages

-Backup Solutions

-Microsoft 365

-Microsoft Azure

-AWS

• Responsible for customers’ power maintenance, upgrade of firmware and patching of systems.
• Ensure continuous delivery of IT services through oversight of service level agreements with business users and monitoring of IT systems performance.
• Manage the IT Asset Management including hardware and software license management.
• Be prompt and meticulous in updating of daily incidents handled into the incident management tool.
• To be highly customer-focus and diligent towards providing good customer service.
• Other duties such as annual DRP/BCP test and other tasks assigned.
• Responsible in project implementation and migration for client’s infrastructure upgrade or new start-up environment.
• Perform end-to-end service delivery to meet the clients’ requirements on implementation, maintenance and support the infrastructure systems.
• Responsible on infrastructure project which include understanding user requirement, solutioning, conduct UAT, implementation and run live.
• Responsible for supporting and implementing both IT and Cloud infrastructure.
• Able to work independently with minimum supervision and work as team when required.

Job Requirements:

Experience:

• Diploma/Bachelor of Science in Computer Science/Computer Information System or equivalent.
• Minimum 1 year of experience, System Integrator environment preferred.
• Proven experience in IT support services field.
• Practical skills and experience in the following:

-Firewalls

-Network

-Windows Servers

-Virtualization (VMWare/Hyper-V)

-Storages

-Backup Solutions

-Microsoft 365

-Microsoft Azure

-AWS

• Understanding on network and server fundamentals.
• Practical experience in effective time management, including ability to prioritize & multitask
• Demonstrated ability to apply IT in solving business problems.

Skills:

• Fluent in spoken and written English
• Excellent communication and project coordination skills
• Knowledge in Windows Server 2003/2008/2012/2016/2019 environments.
• Basic knowledge in networking switches and port management
• Capability of seeing the tasks assigned holistically, able to break-down the task in detail and follow-through end-to-end.
• Good communication as this role needs to handle internal and external customers.
• Service oriented engineer to internal and external customer.
• Ability to provide IT training and awareness to other department users.
• Microsoft/Cisco/ITIL foundation certification a plus.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

This project aims to model the corrosion induced damage process in reinforced concrete. A multi-physics model is envisioned, to capture the ingress of chloride ions, the stress loading on concrete material due to the formation of corrosion products, and the resultant damage in concrete.

The candidate is expected to perform the following tasks:
• Develop and implement a multi-physics FE numerical model for concrete on the diffusion of chloride ions;
• Develop and implement a FE damage model for concrete to capture the development of cracks in reinforced concrete;

Job Requirements

• Possess a bachelor’s degree in a relevant field, with demonstrated experience in the following topics:
• Meso-scale generation and meshing of FE unit cells for concrete.
• Phase-field / nonlocal / gradient damage models for concrete.
• Good written and spoken communications and able to present results clearly.
• Open to fixed-term contract.

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

Helpdesk Engineer

We are looking for experienced full-time helpdesk engineer to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

We are seeking a highly skilled and experienced Senior Network Engineer to join our team. The ideal candidate will have a strong background in data center deployments and the construction of large-scale infrastructure.

Responsibilities:

• Lead and execute data center deployments and build large-scale infrastructure.
• Design, implement, and manage network routing and switching protocols including BGP, TCP/IP, VLAN, ISIS, OSPF, and MPLS.
• Perform basic tasks using the Linux/Unix command line interface.
• Analyze complex situations and employ advanced troubleshooting skills, utilizing systems and tools to creatively solve problems under pressure.
• Work with Service Provider network hardware platforms and architectures, including routers, switches, and data center switching platforms (preferred).
• Conduct field-based work in data centers, ensuring efficient and reliable network performance.

Qualifications:

• 8-14 years of relevant experience in network engineering.
• Strong knowledge of network routing and switching concepts and protocols.
• Proficiency in using Linux/Unix command line interface.
• Proven problem-solving abilities and experience in high-pressure environments.
• Previous experience with Service Provider network hardware and data center architectures (preferred).
• Hands-on experience with field-based work in data centers.

Scope of Work:

· Planning and design of Civil and Geotechnical engineering works

• Geotechnical Design and Analysis for ERSS work
• Preparation of Plaxis Simulation following the proposed Construction Sequence

· Preparation and design calculations and technical drawings for Civil and Geotechnical Engineering projects

· Preparation of the Impact Assessment Report

· Preparation of the Instrumentation Plan

· Preparation of Geotechnical Interpretation Report

· Execution of the E-Submission via Cornet

· Good opportunities to explore various geotechnical work, such as reclamation, tunneling (TBM/Mining Tunnel), MRT C&C Project etc.

Requirements:

· Candidate must possess at least a Bachelor’s Degree in Civil or equivalent

· Majoring in geotechnical or related subject is an advantageous

· Fresh graduate with strong fundamental geotechnical knowledge is encourage to apply, or good working experience with systematic training is ideal

· Experience in Plaxis, Geo-Studio, Roc Science can be an advantageous but not compulsory

*Only shortlisted candidate will be notified.

COMPANY DESCRIPTION

Founded in Singapore in 2004, Akribis Systems is a motion control company that provides high precision direct drive motors. We construct products for a range of industries including renewable energy, semiconductor, communication, biomedical, robotics or any industry that requires precise motion.

We produce direct drive motors with a high force density and patented coil design that decreases cogging. Our linear and rotary motors also are available with stages that we manufacture ourselves so you can smoothly integrate the motor into your design.

More than simply a manufacturer, we are also innovators. Our deep knowledge of engineering and dedication to the work has resulted in 92 patents, and our research and development into the field of magnetics will only continue to grow our business. Our engineers are able to custom design motors and stages to your specific requirements with you as a co-developer.

Today, we have five production factories and numerous sales and support offices across the globe. At Akribis Systems, precision matters.

Department Overview:

The Stage Product Development focuses on bespoke designs for customers in a wide range of industries, such as semiconductor, solar, flat panel, hard disk, LED, printed circuit board and 3D printing. In these stages and systems, it comprises of many components such as motors, encoders, bearings, designed fabricated parts, pneumatics, and many more to assemble into a multi-axis stage specifically designed to meet specifications provided by customers.

RESPONSIBILITIES

• Communicate with customers
• Understand specifications or requirements from customers
• Design or illustrate electrical diagrams, cables and control boxes
• Liaise with various departments such as purchasing and manufacturing to generate lead times for customers Generate Bill of Materials (BOM)
• Generate engineering drawings ready for fabrication
• Verify or qualify cables or electrical components to see if it is suitable to be used for usage on a stage Work hand in hand with the cabling and testing team to troubleshoot issues
• Work closely with engineers from various departments like Applications, Mechanical, Motor, Encoder, Manufacturing to ensure progress of projects
• Guide technicians in the assembly floor for prototype stages
• Hands-on in the assembly floor and make decisions to modify or change parts in the design Conduct basic tests to characterize and measure specifications during testing phase
• Conduct investigative works and make proper assessment of issues from Return Material Authorization (RMA)
• Generate Engineering Change Notice (ECN)
• Generate Work Instruction (WI) Perform tasks related to project closure
• Prepare documents and work with respective departments to run stages into mass production

• Must possess at least a Diploma in Engineering
• Applicants with experience in electrical or mechatronic related fields will be advantageous
• Fresh graduates with relevant knowledge in their course of study are welcome to apply

Skillset(s) Requirement:

• Drafting using EPLAN, NanoCAD, AutoCAD and Draftsight
• Microsoft tools such as Excel, Words and Powerpoint
• Cabling tools such as soldering irons, crimpers and multimeters

Attributes:

• Must be able to work well with a colleagues of all traits. Engineers, technicians, purchasers, project managers, etc.
• The job is hard core engineering, therefore the applicant needs to be able to cope with his/her time and work

Job Purpose

Easmed is looking for a Senior Full Stack Engineer to spearhead the development of applications on mobile, web and IoT devices to address customer needs and pain points.

Ability to demonstrate scalability and stability in development plans will be key the success of the candidate in this role.

Critical Work Functions & Key Tasks

Backend Development

• Expert in NodeJS and Python.
• Expert in Postgres and modern applicable ORMs.
• Proficient in using message queues system for load balancing.
• Expert in programming design principles.

Frontend Development

• Expert in ReactJS.
• Proficient in Web and Search Engine Optimization techniques in React.
• Expert with state management libraries such as Redux or MobX.

General Expectations

• Experience with frontend build tools such as Webpack, Babel, and npm.
• Familiarity with modern testing frameworks for both Backend and Frontend functions.
• Expert in version control systems.
• Proficient in work concurrency and thread management.
• Prior CICD and microservice experience is a plus.

Requirements

• Bachelor's degree in a relevant field.
• Proven experience as a full stack developer working on backend and frontend projects.
• Familiar with cloud hosting and managed services.
• 5 years in relevant programming experience.

Job Responsibilities:

• Render all M&E Engineering support to the M&E Manager/Project Manager for the successful execution of the project.
• Liaise and coordinate with clients, consultants, consultant representative (RE/RTO), relevant authorities and sub-contractors on M&E issues and challenges.
• Coordinate with all M&E subcontractors, as well as project team structural and architectural colleagues to resolve all drawings, site discrepancy or technical issues.
• Attend all project meetings and progress meetings relating to meeting master program schedule.
• Ensure good M&E drawing management and the control of M&E documentation/filing on site.
• Ensure timely production and submission of M&E shop drawings, materials submission and method statements. All M&E shop drawings, materials and method statement are to be approved before use.
• Ensure all M&E site activities are well-planned, well-coordinated and on time.
• Oversee and guide all M&E staff/Supervisors/sub-contractors, ensuring work is carried out in accordance to the approved shop drawings, materials and method statements.
• Prepare accurate and comprehensive M&E progress report with photographs when required.
• Arrange for all M&E T&C works
• Work with Consultants to come out with proper site inspection schedule to be carried out by the relevant government authorities.
• Work closely with EHS Department to ensure strict compliance of safety regulations.

Requirements:

• Degree in Mechanical/Electrical Engineering or related disciplines
• Minimum 3 years’ experience for Main Contractor in project management and/ or site coordination works for building or civil projects
• Strong in communication skill and speak good English
• A team player

Daily Update of Project / Operation Progress to immediate superior.

To have and maintain good daily attendance and punctuality.

Ensure to know project scope of works and meet the clients needs as per project standard and requirements.

Together with site supervisor, review and ensure that engineering drawings issued for construction should be completed with site constructability.

Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements

To learn on how to Oversee and monitor works progress as per project schedule.

Update and report daily progress status and lookahead minimum 3days plan.

Learn and conduct tool box meetings

Department Overview:

The Stage Product Development focuses on bespoke designs for customers in a wide range of industries, such as semiconductor, solar, flat panel, hard disk, LED, printed circuit board and 3D printing. In these stages and systems, it comprises of many components such as motors, encoders, bearings, designed fabricated parts, pneumatics, and many more to assemble into a multi-axis stage specifically designed to meet specifications provided by customers.

Job Description

• Communicate with customers
• Understand specifications or requirements from customers
• Design or illustrate electrical diagrams, cables and control boxes
• Liaise with various departments such as purchasing and manufacturing to generate lead times for customers• Generate Bill of Materials (BOM)
• Generate engineering drawings ready for fabrication
• Verify or qualify cables or electrical components to see if it is suitable to be used for usage on a stage• Work hand in hand with the cabling and testing team to troubleshoot issues
• Work closely with engineers from various departments like Applications, Mechanical, Motor, Encoder, Manufacturing to ensure progress of projects
• Guide technicians in the assembly floor for prototype stages
• Hands-on in the assembly floor and make decisions to modify or change parts in the design• Conduct basic tests to characterize and measure specifications during testing phase
• Conduct investigative works and make proper assessment of issues from Return Material Authorization (RMA)
• Generate Engineering Change Notice (ECN)
• Generate Work Instruction (WI)• Perform tasks related to project closure
• Prepare documents and work with respective departments to run stages into mass production

Qualifications

• Must possess at least a Diploma in Engineering
• Applicants with experience in electrical or mechatronic related fields will be advantageous
• Fresh graduates with relevant knowledge in their course of study are welcome to apply

Other Information

Skillset(s) Requirement:

• Drafting using EPLAN, NanoCAD, AutoCAD and Draftsight
• Microsoft tools such as Excel, Words and Powerpoint
• Cabling tools such as soldering irons, crimpers and multimeters

Attributes:

• Must be able to work well with a colleagues of all traits. Engineers, technicians, purchasers, project managers, etc.
• The job is hard core engineering, therefore the applicant needs to be able to cope with his/her time and work

C2D Solutions Pte Ltd is Hiring!!!

Only Singaporean and SPR need to apply!

Web: www.c2d.com.sg

Tel: +65 6392 2949

Job Description: Mechanical & Electrical Engineer

Company Overview

• C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimisation.
• We were established in 2012 and operates as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions.
• We have a team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers to ensure first-rate engineering solutions for our clients.
• We have grown over the years and are continuously increasing our market presence and are seeking like-minded individuals to join our team as a Mechanical & Electrical Engineer.

Job Responsibilities:

• Design and commissioning of building mechanical & electrical systems including, fire protection, air-conditioning & mechanical ventilation, smoke control systems, power distribution systems, lighting systems, etc.
• Perform Computational Fluid Dynamics simulations to design & optimize ventilation, pollution control and fire & smoke control systems.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements.
• Participate in Testing & Commissioning phase of completed mechanical & electrical installations.
• Appointed engineers will be attached to Senior Engineers who will provide Internal Training and Supervision.

Why you should apply:

1. We are a family-centric company that place equal emphasis on personal and professional growth.
2. Appointed engineers with interest and potential will beoffered sponsorship to continue professional upgrading tofurther their engineering career development.
3. Career development includes the opportunity to register as aProfessional Engineer (PE) and/or Fire Safety Engineer (FSE).
4. Opportunities to work on dynamic and impactful buildingprojects
5. Our projects’ portfolio includes pharmaceutical & semi-conductor manufacturing facilities, air & land infra-structurefacilities, hospitality & conventions facilities, etc.

C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimization. We were establishedin 2012 and operate as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions. Our team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers ensure first-rate engineering solutions for our clients. Since 2012 we have grown exponentially and are continuously increasing our market presence and are seeking like-minded individuals with mechanical engineering or building services degrees to join our team as a Mechanical & Electrical Engineer.

Deskside/Desktop Support Engineer

We are looking for experienced junior and senior full-time deskside engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description:

· Engage in the design and development of blockchain products, research blockchain protocols, mechanisms and underlying implementations, etc.;

· Collaborating with managers to determine blockchain technology needs and envisaged functionalities.

· Build a blockchain-based underlying architecture, which can realize public chains, side chains, private chains, and various logics, and provide service for application layer call;

· Documenting blockchain development processes and complying with best practices in data protection.

· Optimizing and securing blockchain applications by integrating new tools and technologies.

Job Requirements:

· Bachelor's degree in information security, computer science, or related.

· At least 2 years of experience as a blockchain developer.

· Advanced proficiency in programming languages, such as C++, Java, and Python.

· Extensive experience in back-end development, algorithms, and data structures.

· Knowledge of cryptography and blockchain protocols.

· In-depth knowledge of best practices in blockchain management and data protection.

· Advanced analytical and problem-solving skills.

· Superb organizational skills and keen attention to detail.

· Excellent communication and collaboration abilities.

The Nice-to-Haves:

· Experience in large Internet companies or well-known big data companies;

· Experience in the principles, mechanisms, and related encryption algorithms of Ethereum/Bitcoin/Blockchain.

1. Must possess Engineering degree or equivalent.

2. Must be able to coordinate clients,inspector,suppliers, workers & sub-cons.

3. Can do computed aided drawing(autocad & sketch up)

4. Must be able to interpret drawing, can generate shop drawing & cutting list.

5. Able to work on saturday.

6. Able to fulfill task in minimum supervision.

7. Able to schedule daily work activities with the workforce and resources.

8.Able to write method statement and risk assessment.

Who We Are

We are an Artificial Intelligence (AI) venture backed by Shell, a multinational energy major, dedicated to tackling the most complex issues in the energy sector through groundbreaking research and development in AI and Data Science. Founded in Singapore, our ultimate goal is to establish ourselves as the leading hub for AI and Data Science R&D in Southeast Asia.

We are looking for a Software Engineer to join our dynamic team. As a Software Engineer, you will work on designing, developing, and improving key components of the technology stack related to AI, data engineering, high-performance computing (HPC), and geophysics, among other specialized topics We are looking for people from various development backgrounds but most importantly for someone who is passionate about solving challenging problems and can think out of the box.

Responsibilities

• Design, develop, and improve key components of the technology stack in high-paced, high-impact real-world projects.
• Apply the technology to real work and high-impact client projects.
• Maintain high code quality standards and be accountable for the work delivered.

Requirements

• Bachelor's or Master's degree in Computing, Science, or Engineering with 2 years of software development experience.
• High proficiency in Python is a must. Experience in C, C++, Rust, or other programming languages is a plus.
• Good aptitude for abstract thinking and problem-solving. Good understanding of complex algorithms and data structures.
• Experience is required with essential development tools such as git, Linux Shell Scripting, vim/emacs, etc.
• Experience with parallel computing, system programming, full-stack development, and web development can be a plus.
• Ability to work effectively in a fast-paced environment with high expectations.

Benefits

Why Join LRD?

LRD offers a conducive work environment in a company culture that values authenticity, integrity, technical skills, teamwork, and results. Here are some of the opportunities offered by the position:

• You are always presented with new challenges to solve intellectually stimulating problems. The work never gets stale, mundane, or boring.
• Continuous learning opportunities to develop your technical expertise in many subfields of AI, ML, HPC, Geoscience, Engineering, etc.
• Your work will have an immediate impact on high-impact real-world problems such as natural resource exploration and energy security.
• Have your work recognized with publication opportunities in top scientific conferences and journals.
• Be rewarded for your contributions with high-performance bonuses well above the market rate.
• Friendly and casual working environment.

We are seeking a results-driven Senior Software Development Engineer to join our high-performing Engineering team at Ground Labs. As a Senior Software Development Engineer, you will join a motivated and multi-talented team of engineers to build powerful products and solve awesome real world problems. This position will be based in our Singapore headquarters and will report into our Engineering Manager.

We are looking for a “hands on” individual who can quickly roll up their sleeves and make things happen. We work on different products & technologies, and the ideal candidate is someone who is a self-starter and is willing and able to learn things on the job fast and well.

At Ground Labs we are a people company - we are proud of what we do and have fun doing it! If you have what it takes to be a contributing member of the team then come be a part of our continued success story and help shape our future.

You will be responsible for:

• Researching new technologies and prototyping solutions
• Preparing or improving software design and architecture
• Managing software availability, latency, scalability and efficiency
• Developing new product functionality and fixing software bugs
• Working with Customer Support and customers to troubleshoot and address issues
• Mentoring other engineers and reviewing their code
• Participating in all phases of software development (specification, design, development, documentation, unit testing)

To be successful in this role, you will need to have:

• A degree or equivalent in Computer Science or related field
• 7 years of relevant industry experience
• Hands-on experience in modern C++ development
• Excellent English written/oral communication skills
• Experience in developing scalable, multi-threaded, low latency components with minimum memory footprint
• Good understanding of: software security; Windows and Linux or Unix systems; databases; computer networks; cloud storage and computing
• Ability to work efficiently with the existing code base
• Ability to take a problem and solve it with minimal supervision

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a first-of-its kind AI-assisted integrated NDT verification system for reusability of structural steel with accuracy of ±10% at confidence level of 95%. The key innovation is to use AI to analyse a bigger data set and build a multi-parameter machine learning (ML) model that integrate the complex mechanical properties obtained from DT and the electric/magnetic permeability data obtained from NDT to predict the critical material characteristics of reusable steels.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. Establishing test result database: Conducting both DTs and NDTs on the same samples to create a comprehensive dataset for AI model development, managing data collection processes on-site at the collaborator’s factory, and ensuring the accuracy and integrity of the collected data.
  2. Developing statistical model: Utilizing DT results to develop statistical models for estimating mechanical characteristics based on normal distribution and analyzing statistical data to support model development.
  3. Developing and verifying the AI model: Developing various regression models and evaluate their feasibility and suitability, conducting model fitting and verification phases using training and test datasets and ensuring the selected model meets the accuracy criteria (±10% at 95% confidence) for individual mechanical characteristics and overall classification results (grade determination).
  4. Validation of the method: Implementing the proposed method and AI model in test bedding cases, measuring the impact of the method in terms of time and cost savings and developing implementation guidelines based on validation results.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.
• Publish research findings in peer-reviewed journals and present at conferences.
• Assist in the preparation of project reports, proposals, and documentation.

Requirements

• Have relevant competence in the areas of structural engineering, material science, statistics and programming basics.
• Have a degree in Civil Engineering, Mechanical Engineering or Material Science. Possessing a Master’s or PhD degree will be advantageous.
• Knowledge of AI / ML and common ML programming languages will be advantageous.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work
• Able to carry out data preprocessing, develop statistical and regression models.
• Possess knowledge of the mechanical properties of structural steel and factors affecting its performance
• Able to prioritize tasks, meet deadlines, and manage multiple responsibilities.

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role