Job Description:

• Operate Crane
• Ensure regular maintenance and carry out daily safety check of the assigned crane, including filling up the crane logbook and lifting logbook as per Ministry of Manpower guidelines.
• Daily routine check before and after operating Crane
• Inspect Crane for defective parts and notifies Supervisor of defects or malfunctionsMotoring crane stability and load weights.
• Ability to lift heavy loads, work in heights.
• Follow operational procedures with due care and diligence.
• Maintain good safety practices.

Requirements:

• Minimum 5 years experience in crane operations.
• Possess valid crane operator license.
• Able to perform shift work when required.
• Willing to work night shift will be a plus.

•Understand and Familiarity with AGVs, AMRS, collaborative robot, Robot welding and Machine learning.

•Knowledge of control systems, sensors, actuators, electronics

•Familiarity with industry safety standards for machinery and robots is a plus.

•Learn and execute the production methodology, Learn the welding process and fabrication requirement.

•Learn the program for AGV and Laser cutting machine and Automatic Channel cutting saw.

•Learn the DfMA M&E modular production, M&E services compliance, requirements an installation method.

•On job training Able to understand design of electrical system and single line and Installation drawing, details and calculations.

•Communicate relevant project information to the project leaders/project team.

•Implement and monitor Quality Assurance items.

•Effectively manage time to ensure work is completed within established periods.

•Understand M&E services and testing commissioning.

Job Description:

• Ensure regular maintenance on his assigned crane i.e. properly greased, lubricated and regularly cleaned as to allow the crane stay operational at all times;
• Ensure before starting work, Crane Operator is to conduct daily safety check on his assigned crane including filling-up crane log book and lifting log book as per Ministry of Manpower guideline;
• Ensure appropriate valid lifting gears are used;
• Ensure to adhere site in-house regulations i.e. to hand-over the by-pass key to site lifting supervisor or site person in-charge prior execution of the job to avoid any safety violation;
• Report to Controller and/or Operation Staff for advice if there is any unsafe job requested by site;
• Ensure timely submission of completed Job Sheet or Time Sheet or Work Order;
• Follow operational procedures with due care and diligence;
• Undertake any other assignment related to his scope of work assigned by the HOD and/or Management whenever deemed necessary.

Job Requirements:

1. Possess valid crane operator licence from MOM with at least 3 years experience;
2. Punctual and hardworking;
3. Reliable team player.

Interested, please apply now or call us at 6799 5934 / 6799 5949

Job Responsibilities:

• Perform all assembly / injection related operations and secondary processes
• Perform basic housekeeping to maintain safe work station
• Utilize work tools to check and perform all assembly processes
• Check for defects and perform re-work when required
• Report to leader and assistant leader

Working Hours

• 4 days : Mon - Thur, 6:45am - 6:45pm;
• 4 days : Mon - Thur, 8:15am - 8:15pm / 8:15pm - 8:15am
• 5 days : Mon - Fri, 8:15am - 5:30pm

Others

• Transport provided at designated locations
• Medical and dental benefits
• Attendance allowance

Job Description:

• Material planning: performing statistical analysis based on past consumption, lead time, value of material, EUC requirements and provide recommendation to support operations.
• Periodic review of inventory level to trigger replenishment up to level to support operations materials requirements based on provisioning model in considerations of Lead time, Consumption, EUC Requirements, Value of Material, MOQ, EOQ.
• Establish monthly engagement with respective stakeholders to review and rundown legacy stock and stock obsolesce.
• Work closely with project team to develop projections to ensure project requirements and schedule, as well as adjust projection according to changes in the project deliverables/ schedules.
• Communicate with respective stakeholder on SNCA and expired materials in order to undertake the correct resolution to these stocks.

Job Requirements:

• Diploma in Electrical/ Electronic/ Industrial / Mechanical Engineering/SCM or equivalent
• Must have good communication, interpersonal skills and be pro-active
• Experience with databases and spreadsheets
• Ability to create digital reports.

Please note: This is not a Remote role and will require the incumbent to be based in Singapore and work a hybrid schedule. This is an Individual Contributor role.

POSITION OVERVIEW

The successful candidate will be a Senior Technical Lead within the TISC (Technical, Innovation & Supply Chain) architecture team supporting the CPS (Commercial Product Supply) and NAOU (North America Operating Unit) organizations through ensuring all technology delivered meets standards to drive supply chain transformation initiatives. This role is critical to enabling digital transformation through supply chain transformation and ‘plant of the future’ initiatives.

The role focuses on translating business needs into technical systems solutions, within a structured agile framework. This will entail defining systems in relation to enterprise infrastructure, executing activities related to business, IT and partnering with internal and external technical teams in the delivery of solutions. The candidate will have a key role in identifying and recommending products and features, evolving the organization's technical infrastructure as well as leading the implementation of new procedures and techniques.

QUALIFICATIONS & RELATED EXPERIENCE

• Bachelor’s degree in Computer Science, Engineering or significant practical experience in a related field.
• Minimum of 8 years related work experience preferably in manufacturing IT or process Industry.
• Must have proven experience working with IT, OT and supply chain architectures including designing, developing, deploying, managing, and scaling applications.
• Must have a strong practical knowledge of data management, data infrastructure, data Interfacing through Azure based deployments with a focus on maintenance and improvement.
• Should be proficient in supply chain end to end processes, using ERP systems (e.g. SAP).
• Advantageous additional desirable skills would include hands on experience at scale with workload management (Kubernetes). Some practical exposure to scripting (Python) and object orientated coding is also desirable.

KEY DUTIES AND RESPONSIBILITIES

• Design, develop and implement scalable, robust and secure IT & ITOT architectures that support the end-to-end supply chain lifecycle, including procurement, production, logistics, warehousing and distribution.
• Collaborate with business owners to respond to their needs with thought out technical requirements
• Designing and developing solutions in alignment with the enterprise architecture direction & standards and ensuring compatibility and ease of integration with company architectures.
• Oversee the integration of SAP/ERP supply chain applications, ensuring seamless integration with Ignition based infrastructure.
• Providing architectural support for business and ITOT applications by configuring, managing system settings, installing plugins and performing upgrades.
• Lead and guide the development of regional technical teams and junior staff in terms of future production enabling architectures.
• Exemplifying the use of DevOps, Github and other CI/CD tools and mentoring junior personnel in these behaviours.

What can help you be successful in the role?

Growth Behavior:

• Growth Mindset: Demonstrates Curiosity. Welcomes failure as a learning opportunity.
• Smart Risk: Makes bold decisions/recommendations.
• Externally Focused: Understands the upstream and downstream implications of his/her work.
• Performance Driven & Accountable: Has high performance standards. Outperforms her/his peers.
• Fast/Agile: Removes barriers to move faster. Experiments and adapts. Thrives under pressure and fast pace.
• Empowered: Brings solutions instead of problems. Challenges the status quo. Has the courage to take an unpopular stance.

Leadership Behavior

• Act Like an Owner: Deliver results, creating value for our brands, our System, our customers and key stakeholders.
• Collaborate with the System, Customers and Key Stakeholders
• Develops Self and Others: Develop self and support others' development to achieve their full potential.
• Drive Innovation: Generate new or unique solutions and embrace new ideas that help sustain our business.

What We Can Do For You

• Career growth and development: Leveraging our boundaryless network, we provide access to educational platforms and provide coaching, mentoring and feedback, as a part of our Leadership & Development process.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs. We want to make our culture inevitable.
• International Experience: Become part of international projects and work along multicultural teams, through our global network.

Job Description:

· Handle sales enquiries and order processing

· Provide administrative support to ensure operation efficiency of office

· Attend to customer enquiries, generate sales orders, delivery orders and customer invoicing

· Maintain good relationships and rapports with customers and buyers via email and telephone

· Maintain a well-organized record of customer database

· Handle sales enquiries and order processing

· Other ad-hoc duties

Job Requirement:

· Candidate must possess at least a higher secondary/ NITEC, Diploma in any field

· Proficient in Microsoft Word and Excel

· Service oriented and ability to work in a team with good communication skills.

· Working Location: 60 Benoi Road (Beside Joo Koon MRT)

· Working Hours: 8.30 am to 5.30pm (Mon – Fri)

· Alternate Sat - 8.30 am to 12.30pm (consider as overtime)

Job Description:

· Handle sales enquiries and order processing

· Provide administrative support to ensure sales efficiency.

· Attend to customer enquiries, generate sales orders, delivery orders and customer invoicing

· Maintain good relationships and rapports with customers and buyers via email and telephone

· Maintain a well-organized record of customer database

· Other ad-hoc duties

Job Requirement:

· Candidate must possess at least a higher secondary/ NITEC, Diploma in any field

· Proficient in Microsoft Word and Excel

· Service oriented and ability to work in a team with good communication skills.

· Working Location: 60 Benoi Road (Beside Joo Koon MRT)

· Working Hours: 8.30 am to 5.30pm (Mon – Fri)

· Alternate Sat - 8.30 am to 12.30pm (consider as overtime)

Main Job Responsibilities

• Loading and unloading of goods
• Document despatch and delivery
• Pick, pack and issue goods
• Participate in stock take
• Ensure proper control and maintenance of material handling equipment such as forklift and reach stacker
• Perform general housekeeping of warehouse
• Operate forklift and reach stacker

Job Requirements

• Relevant working experience in warehousing/ logistics environment
• Able to work overtime when required
• Basic computer literacy skills
• Must possess forklift licence
• Possess heavy forklift licence and/or certificate in Rigger & Signalman will be an advantage

Job Description

• Able to set up, operate and maintain 3 axis CNC milling machine independently without supervision
• Setup, operate and maintain all measuring equipment, gauges and fixtures for making accurate inspection checks
• Able to read and interpret engineering drawings
• Able to work in accordance to technical instructions and engineering drawings
• Perform simple troubleshooting of machines
• Experience with Yaskawa robots will be advantageous
• Knowledge of MIG welding or valid MIG welding certificate will be advantageous

Requirement

• NITEC/Higher NITEC qualification or equivalent in Precision Engineering or equivalent
• At least 2 years working experience in a Precision Engineering environment
• Workplace Literacy and Numeracy Level 5

General Summary

Currently, we have a great opportunity available for an Chemical Operator, ETP to join our Production Team/Group/Dept. This position will be located in our Singapore branch and will report directly to the Production Engineer. The ETP operator is responsible for safely and efficiently operating all equipment necessary to manufacture atmospheric emulsions, reactor batches, pilot batches, and cold-blend products. This position is also responsible for performing quality control testing, packaging product for shipment to customers.

Primary Responsibilities

· Communicate with Shift Team Leaders and Production Engineer regarding safety, production, quality, or any other operational issue

· Manufacture batches in accordance with all safety, quality, and efficiency standards by following work orders and verbal directions

· Safely and efficiently operate reactors, emulsion kettles, Cowles mixers, homogenizers, heat exchangers, pumps, filtration devices, automated packing stations, forklifts, and other equipment related to the manufacture of chemicals

· Correct packaging of finished goods into pails, drums or totes as required.

· Efficient operation of the wastewater treatment plant, soft water process and boiler operation when necessary

· Use equipment to monitor pressure, temperature, and other hazardous conditions

· Monitoring of SCADA systems

· Execute process parameters warning alarm systems

· Wear proper Personal Protective Equipment (PPE) when required

· Perform quality control testing and adjust batches to ensure specifications are met through water adjustments, debugs, reheats, etc.

· Perform required calibrations on equipment in accordance to ISO procedures

· Ensure accurate documentation and inventory accuracy in accordance to established doctrine

· Use all equipment safely and ensure safe operation of equipment by coworkers

· Maintain clean work areas in accordance with 6S protocol

· Assist in the manufacture of new products and establishing procedures

· Prepare sample as per customer request

· Assist in the prevention of quality problems and the establishment of solutions for existing issues

· Perform related duties as assigned or as the situation dictates

· Live our Values & Behaviors

· Collaborate effectively within a highly matrixed global environment

Other

· Perform related duties as assigned or as the situation dictates.

· Must be able to climb stairs, stand for extended periods of time, and safely lift up to 40 kg

· Must be able to wear required Personal Protective equipment (PPE) for extended periods of time

· Must be able to pass Pulmonary Function Test

· Must be able to operate forklift safely

· Must show proficiency in the operation of all necessary equipment

Critical Competencies, Knowledge, Skills, and Abilities

· Basic math and computer application skills

· Basic mechanical maintenance & troubleshooting skills (eg, mixer, motor & pump) will be a plus

· Knowledge of SCADA, PLC Programming & DCS system will be advantageous

· Ability to think independently and handle tasks through to completion in an efficient manner

· Ability to adapt to changing demands and to react positively to verbal instructions given by a Team Leader or other superior

· Excellent oral and written communication skills

· Proven ability to follow procedures and handle multiple tasks, effecting a positive outcome

· Willingness to work in a team environment

Education and Experience

· “ITE”/ Diploma level

Work Hours

Michelman’s standard work hours for this role is a 12 hours rotating shift, day shift will start from 7am to 7pm and night shift will start from 7pm to 7am.

Shipyard in Pioneer Road urgently requires

CRANE OPERATOR

* Conduct a thorough check of the equipment before and after operation on a daily basis

* Check all safety devices and hoisting cables of the crane and reports abnormalities or the need for replacement.

* Perform lifting and transferring of various types of load using the lifting equipment as required by project operations.

* Ensure that the lifting equipment is positioned and set-up properly before proceeding with lifting and transferring of loads.

* Assist in the basic preventive maintenance of the equipment.

* Report any findings during checking or operating the equipment to the immediate superior for proper action.

* Assist with mobilisation/demobilisation of lifting equipment

* Possess valid MOM crawler crane license

* Thorough understanding of crane safety standards and procedures

* Must be able to start work at short notice.

* Interested applicants are requested to write in with a detailed resume stating present and expected salary.

Company Overview:

Archisen is committed to providing the freshest, most nutritious, and flavourful produce by establishing the largest network of urban farms in Asia. We are seeking a motivated and experienced Farm Operator to join our Agri-Inputs team.

Purpose:

To manage, provide and distribute all primary Agri-Inputs for the Farms under Archisen.

Agri-Inputs are the source where growing begins. In this role, you will learn the supply chain of raw materials used in farms and the production process of secondary inputs. You will also be involved in the quality control standards of the raw materials.

Responsibilities:

• Process purchase orders and generate production plans.
• Manufacture products and seedlings according to production plans.
• Perform planting activities for production of seedlings.
• Maintain seedling production equipment and infrastructure.
• Perform material stocktaking and management.
• Conduct routine preventive maintenance and inspection activities.
• Maintain Agri-inputs equipment and tools.
• Apply Quality Control Standards for raw materials and finished products.
• Dispatch Agri-input to partner farms and collaborators.
• Maintain documents, checklists and records pertaining to materials, equipment, traceability, and quality.

Requirements:

• Primary/Secondary/NITEC education or equivalent
• Experience working in an indoor farm will be added advantage
• Those who are keen working in an indoor farm may apply
• Training will be provided to ensure that you are up to date with latest farming practices
• Possess fair command of both written and spoken English
• Able to use basic hand tools
• Able to start within short notice
• Able to start work at 8am, normal shift
• 5 days work week
• Location : West

We have an immediate opening for this role. The company will provide shuttle service at Lakeside MRT station and competitive salary package + benefits.

If you are keen to join our team, please forward to us your detailed resume or call us at 6912 5326.

We regret that only shortlisted applicants will be notified.

Job responsibility

• Operate packaging system, plant equipment and processes as per Standard Operating Procedures (SOPs) and comply strictly to safety, quality and environmental guidelines.
• Support and maintain daily operation output and schedule adherence.
• Record all relevant packaging data, ensuring accuracy and compliance with internal standards.
• Identify and report any non-conformities in packaging materials to ensure quality standards are met.
• Carry out small batch blending productions.
• Report all process/equipment/environmental abnormalities, incidents and/or near misses. Take part in further investigation when required.
• Assist in coordination of daily maintenance planning and to participate in maintenance activities and shut-down/start-up of sections.
• Operate forklifts safely and efficiently.
• Ensure export is properly carried out and right material is being sent out.
• Stock-take inventory.
• Ensure good housekeeping of work areas.
• Any other duties as and when required.

Job requirement

• At least GCE “A/O” levels.
• Relevant experience in chemical industry would be an added advantage.
• Forklift license would be an added advantage.
• Ability to prioritize tasks based on urgency.
• Able to work under fast-paced environment.
• Good interpersonal and communication skills.
• Team player.

Job Description

Job Objective:

• Support planning of Plan master production schedule with the material, demand and forecasting requirements.
• Raw material planning to support production consumption.
• Maintain operational efficiency by productive capacity and productivity.

Core Responsibilities:

• Plan master production schedule to develop accurate and effective planning for production and materials.
• Coordinate with all levels of personnel to monitor the situation of demands and supply and address any issues that arise.
• Plan the lubricants list for logistic arrangement to strategy partner.
• Simulation of capacity requirement for any insertion orders or project orders.
• Prepare and analysis reports.
• Work with superior to review and resolve the challenges.
• Ad-hoc duties as assigned.

Job Specifications:

Minimum education qualifications:

• Diploma in Supply Chain, Logistics or relevant field

Minimum years of experience:

• At least 2 years of relevant experience in Supply Chain Management planning of manufacturing of supplies or consumables products.
• Experience in oil and lubricant industry is an advantage

Key job-specific competency requirements:

• Good planning and analytical skills.
• Team player, self-driven and able to work with a sense of urgency.
• Ability to adapt to dynamic, fast-paced work environment.
• Strong communication skills
• Competent knowledge of Microsoft Excel and databases.
• Basic knowledge of supply chain processes and SAP B1.

Key Result Areas:

• Interpret the quality work of scheduling
• Timely, accurate and minimal errors
• High internal customer satisfaction
• Passionate and high integrity

Company Description

Cogent Holdings Pte Ltd is a subsidiary of Cosco Shipping International (Singapore) Co., Ltd and has a wide range of clientele ranging from local SMEs to multinational companies. Cogent owns one of Singapore's largest one-stop integrated logistics hub, Cogent 1.Logistics Hub. It offers warehousing, freight forwarding, container and ISO tank depot, automotive logistics, and transportation services in Singapore. It also operates warehousing and container depot businesses in Malaysia.

Role Description

This is a full-time on-site role for a Crane Operator at Cogent Eastern Precision Pte Ltd. The operator will be resposible with with the day to day operations in the container depot.

1. Assist in container shifting operations

2. Operate yard cranes using computer console to mount and offload containers to and from Prime Movers

3. Arranging and shifting containers in the container yard

4. Load and unload containers to/ from trailers by operating forklift truck or crane

5. Stack containers at the required location, maintain orderliness and ensure containers are stacked safely

6. Shift containers for repairs / washing

7. Track container locations

8. Perform forklift / equipment checks daily

9. Perform housekeeping of the operations working areas

10. Adhere to statutory / company’s safety and health policies, procedures and regulations

11. Any other duties and responsibilities assigned from time to time

Requirements:

1. Minimum GCE 'N' level

2. Minimum 1 year of working experience

3. Able to perform overtime when necessary

5. Willing to work on Saturday

Others:

1. Monday - Friday 8.30am - 5.30pm, Saturday 8.30am – 12.30pm

2. Subsidized meal daily

3. Medical, dental & insurance benefits

4. 2 way-Transport provided at Jurong East

5. Paid Over Time

We are seeking a skilled and safety-conscious Class 5 Lorry Crane Driver & Operator to join our team in the construction maintenance process industry. The ideal candidate will be responsible for the safe operation of lorry-mounted cranes, ensuring the efficient transportation and lifting of materials on various job sites.

Key Responsibilities:

• Operate lorry-mounted cranes safely and efficiently to lift, move, and place materials as required.
• Conduct pre-operation inspections and routine maintenance checks on the crane and lorry.
• Ensure compliance with safety regulations and company policies at all times.
• Coordinate with site supervisors and crew members to understand lifting requirements and site conditions.
• Maintain accurate records of work activities, including load weights, travel logs, and maintenance performed.
• Assist in loading and unloading materials from the lorry as necessary.
• Provide support in other maintenance tasks when not operating the crane.
• Participate in safety training and adhere to best practices in crane operation.

Qualifications:

• Valid Class 5 driver’s license with a clean driving record.
• Certification in crane operation (e.g., CPCS, NCCCO) preferred.
• Proven experience operating lorry-mounted cranes in construction or maintenance settings.
• Strong understanding of safety protocols and regulations.
• Excellent communication and teamwork skills.
• Ability to read and interpret technical documents and site plans.
• Physical stamina and the ability to work in varying weather conditions.

Job Description

1. Handling, checking, receiving, picking of goods via WMS system
2. Ensure accuracy of goods description & quantity upon put away in storage
3. Assist all sales orders had been picked & processed by end of the day
4. Proper house keeping and maintaining of storage area & MHE assigned
5. Daily cycle count prompted via system ensure stocks accuracy

We are helping our client, a Singapore based company who has good printing business. They are looking for a Machine Operator in charge of their machinery’s operation, maintenance, repairing, modification for a smooth operation and production. He/she shall:

Roles & Responsibilities

1. Have related working experience for at least of 3 Years, and have relevant qualification is much better.

2. Have ability of machineries operation, maintenance, repairing, modification.

3. Willing to work in a loud and dusty working environment.

4. Can co-operate with others to work behind normal working hours in case extra order from clients.

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

EA reg no R1550906

1. Packing of finished product into paper bags weighing 20kg to 25kg
2. Stacking of finished product packed in paper bags onto wooden pallets
3. General housekeeping of work area
4. Ad hoc duties as assisgned by supervisor
5. Candidate will be trained to run production of chemial processes when more experienced
6. Protective gear must be worn during work (E.g. safety helmet, mask, ear plugs, gloves, safety boots)

-deliver goods to customer place according to the schedule as given,

-manage daily cash collection from customer and submit to AR department,

-handle stock count and reconciliation of stock,

-good customer relationship and positive attitude,

-good team player,

-able to work independently and minimal supervision,

-ability to resolve customer problem and complaints to maximise customer satisfaction,

-ad-hoc tasks assigned by Head of department,

-Class 3 Singapore lecense.

• Coordinating every aspect of the supply chain, including planning, sourcing, manufacturing, delivery and disposal.
• Maintaining low costs while striving for high efficiency.
• Analyzing data and processes, finding creative solutions, generating reports and presenting findings to upper management and other departments, communicating with external suppliers and buyers, comprehending legal documents, and developing lasting relationships with others.
• Managing a business unit, division, or corporate function with major organizational impact.
• Keeping track of logistics and updating the company’s inventory, analyzing operational performance and resolving issues, and collaborating with vendors and suppliers to ensure all operations (e.g. shipping, delivery) meet quality and safety standards.
• Intensive Training provided

Job Description:

• Manage and streamline the supply chain for plants and landscaping materials, ensuring efficient and timely delivery.
• Be responsible for the control, management and deployment of logistics assets and manpower across different departments and locations
• Recruit, hire, train, and schedule logistics staff and assets according to operational requirements, focusing on productivity improvement and cost reduction
• Schedule and oversee transportation of plants and supplies, optimizing routes and working with drivers to meet delivery deadlines
• Lead and develop a logistics team, providing guidance on best practices in handling plant and landscape supplies, as well as training on safety and logistics systems.
• Ensure that logistics assets are well-maintained, in good condition, and used effectively
• Utilise digital tools to optimise procedures and processes
• Forecast demand on logistics and plan accordingly
• Collaborate with sales and project teams to plan logistics based on client needs and project timelines.
• Establish and maintain proper record keeping to track productivity and standards
• Prepare accurate reports for upper management
• Arrange for, supervise and manage external logistics vendors as required
• Handle customer service enquiries pertaining to the fulfilment of customer deliveries
• Develop internal processes and SOPs to improve efficiency within the organisation
• Manage warehousing operations to improve overall efficiency of logistics function

Job Requirements:

• Diploma or degree in logistics, supply chain management, horticulture or minimum of 3 years’ relevant industry experience
• Experience in logistics, preferable in plants or landscaping supplies
• Possess leadership abilities, able to lead own team
• Strong communication and organizational skills
• Basic knowledge of plant handling
• Valid Singaporean Class 3 driving license is a must, experience with commercial vehicles a plus. Driving record should be clean with no major traffic infringements in recent times.
• Computer-savvy, working knowledge of logistics software (ERP) a bonus

About our company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Operate cranes and hoists
• Transfer loads to construction sites and discharge safely
• Bind loads to cranes
• Conduct equipment and machinery inspections
• Keep and update maintenance and activity log
• Carry out basic repairs to machines
• Follow safety guidelines and protocols
• Any other duties to be assigned from time to time

Pre-requisites:

• Must be a registered Mobile Crane Operator with MOM
• Must possess minimum of class 5 license
• At least 3 years of relevant experience
• Willing to work on weekends and Public Holidays when required
• Project location: Jurong Island (Company transport provided at designated pick-up points)

• 5 days, Alexandra (South-West), walking distance from MRT
• $3200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• No experience can apply

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• 1 year of relevant experience as Process Engineer
• Candidate with no experience can apply as on-the-job training is provided
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]