• High purity chemical and slurry systems operation and maintenance.
• Preventive and corrective maintenance works on electrical and/or mechanical components to support daily operations.
• Drum and pump components replacements, servicing, and qualifications.

Requirements:

• Nitec and above.
• Minimum 3 years of working experience in chemical system handling.
• Proficient with Chemical safety and Quality Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Set up and operate machines such as CNC/NC Milling, Lathe, Surface Grinding, Shaping, Hobbing, broaching and conventional machines to produce high quality products conforming to the customers’ specifications.

Support CORE & EH&S activities.

· Setup, operate and maintain all types of conventional or CNC machines such as Milling, Lathe, Surface Grinding, Shaping, Hobbing, broaching and conventional machines in the cell/process.

· Setup, operate and maintain all measuring equipment, gages and fixtures for making accurate inspection checks.

· Perform simple troubleshooting of machines.

· Able to read and interpret blueprints.

· Maintain pertinent records; Shop-paper and work in accordance to technical instructions and drawings.

· Work in an orderly manner and keeping work areas, benches and machinery in a tidy and clean condition after used.

· Notify the Supervisor timely for any machine or tooling problems which could jeopardize product quality or infringe safe work conditions.

· Engage in any other activities or responsibilities as requested by the Supervisor.

Minimum Education required (specific field or equivalent):

NITEC /Higher NITEC in Precision Engineering or equivalent.

Minimum years of experience in role:

At least 2 years working experience in a Precision Engineering environment.

Preferred Skills (if any):

· Basic command of written and spoken English.

· Able to work weekly rotating shifts.

Desired Characteristics:

· A team player.

· Good mechanical aptitude.

· Good knowledge in CNC programming.

· Able to apprehend technical instructions/drawings.

· Able to use measuring instruments.

· Previously worked in a manufacturing environment.

• Maintain, troubleshoot, and repair container handling equipment at PSA, depots, and workshops.
• Conduct scheduled preventive maintenance services for equipment.
• Respond to customer breakdown calls promptly.
• Assist in assembling, installing, testing, and commissioning new equipment.
• Work on various equipment types: Reach stacker, empty container stacker, terminal tractor, and heavy forklift.

Requirements:

• ITE in Mechanical/Electrical/Automotive or equivalent.
• Possess Forklift or Class 3 driving licenses.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Forum Architects is employing. If you are quick thinking, resourceful, energetic, and a happy person to be around, that will be advantageous. We invite candidates with hospital and healthcare experience to apply.

- Diploma in Architecture or equivalent

- Minimum 2 years experience in a similar capacity

- Proficiency in Revit and Autocad

- Knowledge of authorities’ requirements

Responsibilities :

• Experience in integrating vision systems with automated processes, motion control based on model data, mathematical modeling experience and creating software solutions.
• Work in a multi-discipline team to aid in the collection and validation of system requirements.
• Create automated inspection and guidance solutions using vision and other sensing technology.
• Provide hands-on implementation and mentoring.
• Create innovative technical concepts, ensure costing and schedule to successfully deliver the project.
• Maintain knowledge of new vision, automation and sensing technology.
• Detailed design specification generation.
• Provide internal and on-site integration support.
• Aid in the creation of test plans and documentation.

Requirements :

• Bachelor's Degree in Electrical Engineering or Mechanical Engineering with min three (3) years of relevant experience.
• Experience working with vision system database.
• Knowledge of camera, light, and lens selection for applications ranging from defect detection to part location.
• Programming background with high-level languages such as Visual C# WPF, C++ and Python.
• Experience in developing vision system with Halcon and Opteon camera.
• Good knowledge in Machine Vision programming and experiences.
• Good experience on automation controls, motors & sensors like PLC, CTC, Beckoff PC and controllers, Servo & Stepper motors.
• Familiarity with wiring/cabling size/terminations and load/temperature requirements.
• Familiarity with industrial machinery design.
• Skilled in the utilization of statistical analysis.
• Required to travel regionally (average 20% of the time).
• 5 days work week.
• Transport pick-up at Bedok MRT station.

Job Objectives

We are looking for a System/Infra Engineer to help setup, manage, maintain and troubleshoot our existing deployment and infrastructure. You will be part of a team to help achieve in ensuring the high levels of system/application availability and performance.

• Manage and monitor all installed system and infrastructure
• Install, configure, test and maintain application software, deployment and system management tools
• Liaise with vendors and other IT personnel for problem resolution
• Committed and self-drive 6+ years of experience in deployment process
• Experience in install, configure and troubleshoot of AIX/Linux, WebLogic, iPlanet, Jboss based environments
• Experience in automation and continuous Integration
• Experience in application deployment process and tools such as Jenkins, Aldon LMe
• Having hands on experience in UNIX shell scripting & groovy, networking knowledge, knowledge in IBM MQ, connect direct, ftp/sftp, Oracle DB, administration and perforance testing tools is a plus.

Job Summary

(Description of general purpose of the job)

· Samples collection and chemical adjustments on the plating tanks.

· Perform plating tanks maintenance.

· Management of Chemical wastes disposal and receiving chemicals.

Roles and Responsibilities

(Essential roles, responsibilities and activities a candidate can expect to assume in this position)

· Collect of chemical samples for lab analysis.

· Adjust plating baths by chemical additions.

· Make-up new plating solutions.

· Perform monthly maintenance of filter cartridges change and carry out scheduled treatment.

· Liaise with licensed waste collector on the wastes disposal.

· Receive of incoming chemicals, and updating the chemical inventory log book.

· Support CORE, EH&S, Ethics & Compliance and Quality initiatives.

· Carry-out plating on test specimens for Monthly Periodic Testings.

· Perform other activities assigned by direct Supervisor.

Qualification and Education Requirements (Education and Work experience that a candidate should have when applying for position)

Minimum Education required (specific field or equivalent):

NITEC in Chemical Technology.

Minimum years of experience in role:

No relevant experience required but positive attitude in taking on the role is a must.

Preferred Skills (if any):

· Basic command in written and spoken English.

· Knowledge of Microsoft office Applications.

· Able to work on rotating shifts.

· Basic knowledge of Chemical Handling & Safety.

BIM Modeler

• Salary range: $3000 - $4000
• Work location: Jalan Kayu [Sengkang]
• Working Days: 5.5 Days [Alternate Saturday]
• Working Hours: 9am - 6pm // 9am - 1pm

Responsibilities:

• Prepare BIM Model, Shop drawings & detail drawings of building according to requirements.
• Coordinate with Subcontracts/Engineer to ensure that all drawings are submitted on time.
• To liaise with contractors and clients on coordination issues highlighted and resolved.
• To attend meeting with client.

Requirements:

• Knowledge of Revit (MEP) & AutoCAD software & M&E Services
• Able to read & understand technical drawing and translate to concept.
• Preferably with experience in Fire protection system.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Project Engineer

• Working Hours: Monday-Friday 9am-6pm
• Location: Kaki Bukit
• Salary: $3800-$5000 + VB

Requirements:

• Electrical Engineering with at least 2 years working experiences
• Experience in Marine industry preferred and familiar with Marine navigation system, PAGA, Weather Monitoring system, etc

Job Scope:

• Supervise and co-ordinate/scheduling work projects to fulfil customers’ orders timely, including hands-on component integration, testing & trouble shooting of our electrical products, .
• Support Sales proposals/quotations to customers; support project bidding, etc, including preparation of AUTOCAD technical drawing, datasheets.
• Source & Purchase supplies
• Site services (such as on board docked vessels) whenever required.
• Willing to travel overseas if required.

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Summary

(Description of general purpose of the job)

· Setup and operate a wide variety of electroplating equipments to produce high quality products conforming to the customers’ specifications.

· Perform manual labour in a fast paced production environment to meet customer demand, delivery, cost of sales and late to start.

· To support CORE & EH&S activities.

· Multi task from plating to spray painting.

· Require to use full PPE in a warm environment.

Roles and Responsibilities

(Essential roles, responsibilities and activities a candidate can expect to assume in this position)

· Setup, operate and maintain electroplating equipment as per Job Instruction Sheet.

· Setup, operate and maintain all measuring equipment, gages and fixtures for making accurate inspection checks as per Plating Master & Manufacturing Engineering folder.

· Read and interpret Job instruction sheet required to carry out work tasks.

· Adhere to EH&S & CORE requirements in the work place, submit Hazard observations, QCPC Turnbacks and Safety Innovative Team Projects every month.

· Work in an orderly fashion keeping work areas, work table, plating table, tools, and fixtures in a tidy and clean condition after used.

· Perform daily housekeeping and weekly total productive maintenance.

· Engage in any other activities or responsibilities as requested by the Supervisor.

· Notify the Supervisor or any machine or tooling problems which could jeopardize product quality or infringe safe work conditions.

· Raise Imaint when equipment is down.

Qualification and Education Requirements (Education and Work experience that a candidate should have when applying for position)

Minimum Education required (specific field or equivalent):

Secondary to NITEC qualification in Precision Engineering or equivalent.

Minimum years of experience in role:

At least 2 years of plating experience.

Preferred Skills (if any):

· Knowledge on operating an oven is an added advantage.

· Physically fit & able to work within close proximity of chemical processing.

· Work experience in electroplating is preferred but not necessary.

· Basin command of written and spoken English.

· Perform rotating shifts.

· Able to tolerate high temperature work environment.

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Objectives

We are looking for a System/Infra Engineer to help setup, manage, maintain and troubleshoot our existing deployment and infrastructure. You will be part of a team to help achieve in ensuring the high levels of system/application availability and performance.

• Manage and monitor all installed system and infrastructure
• Install, configure, test and maintain application software, deployment and system management tools
• Liaise with vendors and other IT personnel for problem resolution
• Committed and self-drive 8+ years of experience in deployment process
• Experience in install, configure and troubleshoot of AIX/Linux, WebLogic, iPlanet, Jboss based environments
• Experience in automation and continuous Integration
• Experience in application deployment process and tools such as Jenkins, Aldon LMe
• Having hands on experience in UNIX shell scripting & groovy, networking knowledge, knowledge in IBM MQ, connect direct, ftp/sftp, Oracle DB, administration and perforance testing tools is a plus.

Responsibilities :

• Monitors and maintains the companys Office 365 email system.
• Carry out quality checks on performance and audit of email system and (provides discrepancy reports where necessary).
• Troubleshoots and resolves users' problems with and related to email systems.
• Constantly seeking improvements to secure the user environment and devices.
• Recommend policices and documents related to the acceptable use and standards of the system.
• Prepares training materials,or delivers training,on acceptable use of the system.
• Recommends backup and message retention.
• Install and configure anti-virus software.
• Updating anti-virus software patches and monitor for suspicious activities in the network.
• Peforms other related duties as assigned.

Requirements :

• Diploma in Computer Science or equivalent. Fresh graudate is welcome to apply.
• Experience in monitors and maintains the companys Office 365 email system.
• Preferrably at least 1-2 years of relevant working experience in IT and cyber security.
• Proficient in Office 365 administration and Microsoft Office Suite or related software.
• Excellent verbal and written communication skills.
• Good team player who is self-driven and result orientated.
• Organizational skills and attention to details.
• Preferrably able to join immediate or short notice.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities:

As the main contact for first-level end-user support, oversee and manage complex technical issues in a fast-paced business environment.
Operate and maintain VMware vSphere and Horizon VDI environments, conducting daily administration tasks such as upgrades, patches, and security configurations.
Monitor and optimize these environments, evaluate risks, and troubleshoot workloads.
Stay current on virtual machine technologies.
Provide 24/7 on-call support, lead post-delivery teams for projects related to client applications, and maintain the Inventory Asset list.
Create and manage technical documentation and compile diverse maintenance reports.

Requirements:

Proficient in ITIL Framework practices.
Competency in Quality Escalation Management, Exception Handling, Costs/Overhead Management, and Contract Renewal, ensuring all SLAs are met.
Competence in Backup and Recovery Solutions.
Experience supporting enterprise virtualized environments on Desktop, OS, Client Applications, and Mobile Phones

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for setting and operating CNC Machines
• Responsible for performing preventative maintenance on product equipment
• Responsible for performing other duties as and when required

Requirements

• Min Nitec in Engineering
• Min 1 years of working experience in Precision/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Engage in hands-on activities to conduct regular inspections and monitoring of various building services and facilities.
• Address breakdowns, respond to complaints/feedback, and attend to tenant service calls regarding building services and facilities.

Requirements:

• Nitec and above.
• At least 3 years of relevant experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Perform maintenance tasks on facility systems, including cooling/heating, compressed air, vacuum systems, cleanroom, and non-cleanroom ACMV systems and equipment.
• Assist engineers with operational support, troubleshooting, and problem-solving.
• Coordinate and follow up on internal and external activities as needed.

Rquirements:

• NITEC in mechanical/electrical engineering or equivalent.
• Minimum 2 years experience in manufacturing industries.
• Preferably experienced in cleanroom operations and general facilities systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Troubleshoot and repair equipment failures to reduce downtime.
• Plan and execute regular preventive equipment maintenance.
• Collaborate with Engineers to address process-related problems linked to equipment failures.
• Maintain cleanliness and adhere to safety and cleanroom protocols.

Requirements:

• Nitec in Mechanical or equivalent.
• Minimum 2 years of experience in relevant field.
• Familiarity with Programmable Logic Control (PLC) is a plus.
• Willing to work 12-hour rotating day and night shifts.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Role Purpose

• This role to be perform assigned basic site Quantity Surveying activities with administrative of Site Instruction(SI) and Timesheet Management Systems(TMS) application who will the super administrator to managing the SI/TMS applications.
• Responsible for coordinate with SI/TMS system developer to ensure system requirements.
• Coordinate with our internal IT / Digital & Analytics team of the system safety requirements.
• Coordinate with other stakeholders e.g Construction, Commissioning and Procurement (FSR) related timesheet requirements.
• Create data management of SI/TMS system logical sequences.
• Safe keeping project / system backend coding liaising with SI/TMS system developer.

Key Accountability

• Responsible for collecting Timesheet requirements and formats from the traditional methods.
• Thoroughly understand of the “pain points” of traditional manual timesheet methods and list out.
• Identify issues of the manual method of timesheet / data received from Subcontractors and related errors. This error would help to build the effective TMS digital platform to avoid errors and double-dipping manhours.
• Setting up Digital Timesheet logics of Subcontractor’s log-in and submission standards, MODEC’s approver logics with appropriate constraints within the TMS Application.
• Close coordination with TMS application developer to design & build of the TMS application.
• Assisting on system SIT / UAT process and list out the bugs to fix the system error.
• Ensure the system development with logical features in place liaising with end user of the application.
• Coordination with system developer and end user for roll out the system per agreed timeline / roadmap.
• Organizing project pilot live providing with an appropriate user training.
• Ensuring project Go-Live and administrating the SI /TMS systems as Super Admin.
• Managing project data and configure the system in accordance with project requirements yard / scopes wise and provide access to the Subcontractor and MODEC Users at yard level.
• System troubleshooting and rise ticket if any system error found and fixing the system issues in timely manner.

Technical Competencies

• Microsoft Office, AutoCAD, C#, ASP.Net, VB, C, C++ and JavaScript, VBScript, Python and tools including of Visual Studio, SQL

Qualifications

• Bachelor of Computer Science & Engineering /any IT Related Bachelor Degree;
• Advance Certificate in Software & Application / Fresh Diploma Graduates is an advantage
• Minimum 3-5 of Experiences in IT or Software coding, Programming / Design & Build system applications

Modec is committed in creating a diverse and inclusive workplace. We take affirmative action to ensure equal opportunity for all applicants regardless of race, religion, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected characteristics.

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026