Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Responsibilities

• Carrying out the maintenance of production and auxiliary machinery according to the Quality/ Environmental Procedures and Works Instructions.
• Plan and organize the preventive maintenance programs for all plant equipment and facilities.
• Liaise with Production Department to ensure that all scheduled equipment maintenance and repairs are carried out on time to enable smooth production operation.
• Maintain proper records of all electrical drawings and activities.
• To constantly participate in brainstorming ideas to develop and fabricate machinery, jigs & fixtures in support of the production processes.
• Train and develop Technician and helper so that maximum effectiveness and good performance are achieved and maintained.
• Maintain work discipline and motivate subordinate, setting standard for performance review
• Control and maintain sufficient manpower through proper managing of the subordinate attendance to meet the daily work requirement
• Recommend replacement for turnover and new addition.
• Implement safety program and enforcing the practice by the subordinates

Job Requirements

• Knowledge in PLC and able to work with different brands.
• Bilingual in English and Mandarin or Malay.
• Minimum ITE Cert or Diploma in Electrical Engineering
• Preferably experience in Safety activity
• No Color Blindness

Job Description & Requirements

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Summary: We seek a highly motivated and skilled technician to join our growing team. You will play a crucial role in supporting the deployment of automation solutions and ensuring the successful installation of our projects regionally.

Responsibilities

1 Communicate with engineers to ensure that services are delivered effectively.

2 Handle mechanical assembly based on the provided drawings

3 Prepare electrical panels based on the provided drawings

4 Perform simple mechanical and electrical repair of installed machines

5 Support with scheduled preventive maintenance and upkeep of installed machines

6 Support with installation & commissioning of new equipment onsite

7 Support with fabrication & wiring during project execution

8 Travel to customer sites to support with service enquires whenever needed

9 Keep up to date on administrative responsibilities such as maintaining customer service logs and internal service records in a timely manner

10 Maintain in-house stock and inventory for robot maintenance

11 Performs ad-hoc duties as assigned by the manager

Requirement

1 Diploma in mechanical engineering, electrical engineering or a related field

2 Excellent hands-on skills in mechanical assembly, soldering, crimping, etc

3 Knows how to handle electrical tools like crimpers, wire strippers, ferrules, etc.

4 Must be good in handling mechanical tools such as drills, taps,

5 Basic knowledge of Linux commands will be a bonus

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Albatec is looking for a Warehouse & QC Technician to work with us in a dynamic and clean environment. Candidate to have self-consciousness in safety and assist in maintaining warehouse cleanliness and safe working environment.

Requirements

• Minimum Higher-Nitec and above
• Possess Forklift license or Class 3 license
• Knowledge on the use of measuring instruments, i.e. vernier caliper, micrometer, etc

Responsibilities

• Arrange warehouse inventories, maintain cleanliness and housekeeping
• Operate material cutting band saw
• Operate pin stamp machine for material marking
• Conduct visual and dimensional inspection of components and material stock
• Post-process machined materials e.g. deburring, polishing, etc
• Unpack and pack goods for inspection and delivery respectively
• Assist in machine maintenance

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Key Job Responsibilities:

• Assist the Head of Operations in all daily tasks and matters within the Operations Department.
• Liaise closely with customer in project executions including carrying out site surveys, preparing designs and documentations (method statements, safe work procedures, risk assessments, fall prevention plans and lifting plans) for submission, arrange manpower and logistics to deliver construction equipment to site, install, commission, maintain, inspect, shift, troubleshoot, dismantle and return construction equipment to workshop.
• Conduct frequent site inspections to ensure work done in accordance with contractual scope of work, customer requirements and manufacturer specifications as well as take prompt corrective actions.
• Prepare and submit service reports with pictures, work done forms, weekly inspection checklists and maintenance checklists to customers and Head of Operations.
• Liaise with AEs and PEs to carry out designs, inspections and testing as well as submit drawings, calculations, COS and LM certificates to customers promptly.
• Conduct user trainings and safety briefings as well as organise safety campaigns.
• Perform incident investigation and root cause analysis as well as prepare incident reports with pictures.
• Manage the training, productivity and well-being of the teams assigned by the Head of Operations.
• Ensure our construction equipment and accessories on-site are fully accounted for at all times and implement necessary measures to prevent loss and damage.
• Perform asset and inventory reconciliation and generate monthly reports for Management.
• Use Enterprise Resource Planning system to complete daily tasks and assist in the implementation and improvements of the system.
• Ensure procedures, products and services rendered comply with Company policies, government regulations and ISO standards.
• Maintain historical records for annual accounting and ISO audits.
• Undertake additional tasks and responsibilities when required or as instructed.

Pre-Requisites:

• Team player with strong interpersonal, communication andwritten skills, leadership qualities and ability to managemultiple projects under tight timelines.
• Must be able to read and understand architectural andstructural drawings.
• Knowledge in electrical/electronic/mechanical concepts andAutoCAD will be an advantage.

• MNC, 5 days, Jurong East (near MRT)
• Basic salary: $5500 - $6000
• Entitlement to staff benefits
• 6 months contract (Start in Jan 25)
• Hands-on experience in using IFS system

Job responsibilities:

• Ensuring year end balances are rolled over correctly into new IFS system
• Handling the Accounts payable flow, which includes resolving issues, uploading invoices, coding,generating posting proposals,running payments, and managing daily bank files and tax codes.
• Managing journal entries for transactions not covered in the IFS modules (e.g.payroll, external file uploads, prepayment amortization) .
• Working with the fixed asset module to handle asset acqusition, importing fixed asset objects,running depreciation and ensuring depreciation is accurate.
• Performing reconciliations such as GRNI (Goods received not invoiced),mixed payment postings and bank reconciliations.
• Generating and creating reports required for period closing, including GST/VAT reports,trial balance, GL listings and AP/AR reports.

Requirements:

• Minimum a Diploma/Degree in Finance & Accounting
• At least 5 years of relevant experience
• Must have experience in using IFS system
• Willingness to commit to a 6-month contract
• Responsible, meticulous and independent

Interested applicants, please send your resume to [email protected]

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

The Assistant Chemist/Lab Technician reports to the Lab Manager and is responsible for the below:

Responsibilities

Sample Preparation

• Receive and label all samples brought into the lab for accountability.
• Prepare samples from drying, crushing, splitting and pulverising.
• Mix fluxing reagents and load samples in furnace for the fire assay.
• Mix reagents for acid digestions.
• Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.
• Perform smelting and sample extraction of precious metals as and when required

Recovery of Precious Metals such as Gold and Silver via Fire Assay techniques

• Assist with the recovery of precious metals such as Gold and Silver using Fire Assay techniques.

Measurement & Calibration

• Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.
• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

• Testing of precious metals scraps through cupellation method (fire assaying).
• Evaluate, validate, ensure and report technical accuracy of reporting analytical results
• Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.
• Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

• Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.
• Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Laboratory Housekeeping

• Ensure and maintain work areas and equipment are clean, tidy and organised.

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Promote and implement workplace safety initiatives.
• Ensure and maintain proper sample disposal of waste such as cupels and fire assay lead.
• Wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.
• React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

• Minimum Diploma qualification in Chemistry or its related field.
• Knowledge in safe handling of industrial chemicals.
• Possess effective verbal and written communication skills.
• Fearless of hot environment.
• Able to lift 10kg bars of precious metals.

Relevant Experience

• Problem solving skills.
• Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.
• Possess experience and the ability to operate ICP / XRF is an advantage.
• Must be willing to work overtime whenever necessary.

JOBS DESCRIPTION

• Discuss problems with car drivers or vehicle operators to discover faults
• Listen to engines, fit and operate special test equipment, and test-drive vehicles
• Repair or replace worn or faulty parts by removing assemblies such as engines, transmissions, differentials or steering gear; dismantling them and checking parts, referring to manuals as necessary.
• Reassemble, test, clean and adjust repaired or replaced parts or assemblies, using various instruments to make sure they are working properly and putting them back into the vehicle.
• Diagnose, repair and replace engine management and fuel injection components
• Additional duties as assigned by Supervisor.

JOB REQUIREMENTS

• Ability to work with minimum supervision
• Passionate in motor vehicles
• Humble and willing to learn
• Good working attitude
• Preferably with at least 2 years hands-on experience in Automotive Industry
• Possess Certificate in Motor Vehicle Mechanics or Automotive Technology would be an advantage
• Class 3 driving license would be an added advantage.

Send resume and expected salary to: [email protected].

Only selected candidates will be notified.

• Perform daily accounting & finance duties including receivables and payables processes, general ledger, tax, and bank reconciliation, etc.

• Assist to consolidate accounts and ensure compliance with accounting standards

• Support and ensure compliance with all finance filing requirements, tax filing requirement, audits, procedures, and forms both statutory and internal

• Prepare quarterly financial & management reports and annual financial statements

• Coordinate and liaise with external parties like external auditors, local tax and government authorities where required.

• Manage, supervise and counselling of the Finance team on work performance, expectations and training.

• Liaise with banks on banking transactions

Job Requirements

• Minimum Diploma holder in Accounting & Finance or equivalent

• At least 3 years of experience in Accounting & Finance

• Strong understanding of accounting principles

• Ability to work independently with a high degree of accuracy and efficiency

• Ability to handle ambiguity and confidentiality

• Ensuring compliance with current accounting standards

• Good inventory knowledge

• Support audit and tax queries

• Assist with ad-hoc duties when assigned

RESPONSIBILITIES:

• Support the Company’s IT including emails, printers, office applications, servers and including users who work remotely
• Perform IT equipment / services procurement and purchasing activities, including requisition and goods receipt activities
• Accounts management of Active directory and EPR system in the timely manner
• Maintain the inventory of hardware and software licenses to the assigned system
• Perform day-to-day IT admin and security activities, including patching of computers according to the security protocols and procedures
• Support troubleshooting and investigation for security related activities

REQUIREMENTS:

• Higher Nitec in Computer / IT related field
• At least 1 year of experience in handling IT support related task
• Meticulous and excellent administrative skills
• Good team player and communication skills
• Proficient in MS Office – Outlook, Excel and Powerpoint
• Experience in configurating SharePoint sites
• Experience with ITSM tool like ServiceNow/ FreshService is added advantage

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

Job description

Serve as the primary point of contact for 1st and 2nd line IT support within Northern Marine Group, focusing on the Singapore office. Additionally, support the wider vessel support team by assisting with IT incident management and vessel-related projects. The role includes occasional travel within the Asia Pacific region to provide IT support on vessels and at site offices.

• React quickly and professionally to service desk incidents and requests that are submitted onshore and offshore via the Self Service Portal

• Responding to support requests for hardware such as, but not limited to, PC’s, Laptops, Mobile devices and Printers

• Responding to Service Requests that relate to, but not limited to, access/application/hardware requests, New Joiner/Leaver requests and standard requests that are submitted via the Self Service Portal.

• Provide knowledge base articles to be consumed by the end user – with the objective of reducing calls by empowering colleagues to search knowledge base for guidance/process or procedures prior to engaging the Service Desk.

• Collaborate with other Northern Marine IT teams to facilitate change and introduce new services to the business.

• Collaborate with Infrastructure Services Team for any incidents and changes aligned to network/storage hardware located in Singapore office

• Attend Vessels that have been brought into management/require refresh to facilitate installation/refresh of hardware.

• Identifying CSIP (Continuous Service Improvement Process) items that may improve how the Service Desk functions

• Ensure that the Asset Database is always maintained.

To be considered for this opportunity, candidates are expected to have a good understanding and awareness of the following technologies:

Networking and Hardware support

Desktop & Printer Hardware support

Windows 10 support

Server 2016/2019 Admin

Windows Server 2008/2012/2016 including AD, DNS, DHCP

Virtualization technologies such as Hyper-V and VMware

Wi-Fi Technologies (Unifi)

Active Directory Administration

Office 365 Admin

Remote access experience and remote support

Certifications in the following areas would be a significant advantage:

HNC/HND or equivalent experience in IT related subject

Job summary

Strong understanding of IT systems, including both hardware and software components. Proficiency in troubleshooting and resolving technical issues. and must be able to travel and board vessels as required for on-site support and maintenance.

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.

• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.

• Perform and maintain the documentation of operations in accordance with cGMP requirement.

• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.

• Perform online monitoring of in process parameters / checks throughout the batch.

• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.

• Perform all activities in accordance with cGMP.

• Maintain the cleanliness of work area to ensure cGMP compliance.

• Perform all other relevant duties required to meet the schedule.

• Check relevant material and product details against batch document

• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.

• Involve in equipment / process qualification.

• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.

• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.

• Experience in tablet coating of oral solid dosage manufacturing is preferred.

• A good team player with positive learning attitude.

• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines

• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.

• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Job Description

Report to Workshop Manager and Assistant Service Manager, responsible for performance of all automotive related repairs in achieving the Departmental sales turnover objectives with fast turnaround of customer vehicles and meet quality standard.

Job Scope

• Perform automotive service, repairs and OEM installation as per repair order instructions according to manufacturer's required procedures and quality standard.
• Diagnose and trouble fault on system components of the vehicle.
• Record all jobs done to the vehicle on repair done.
• Notify any addition fault or defect found in the repair process to Workshop Supervisor and obtain appropriate approval before proceeding with the repair .
• Ensure customer vehicles are cleaned after being repaired.
• Perform daily shop floor housekeeping.

Qualification Requirements

• Minimum qualification : N level / NITEC in Motor Vehicle mechanics.
• Minimum 1 year experience in Motor Vehicle Service and Repair for Diesel Engines.
• Valid Class 3 license added advantages.

What a Graphics Current System Interaction Engineer does in HP:

• Ensure the seamless integration of printhead/ink supplies with the printer to deliver good print quality & supplies reliability consistently for our commercial customers.
• Lead the investigation of quality escalations originating from printer factory or the field, working with a cross-functional team to conduct thorough root cause analysis, implement containment actions and deploy corrective and preventive measures effectively.
• Provide technical leadership and expertise in the areas of System Interaction between Printhead/Ink Supplies and Printer Hardware during quality escalation and product change management.
• Analyze field-returned products to identify patterns and recommend corrective actions. Develop and implement product and manufacturing improvement plans to mitigate warranty costs & improve customer satisfaction.
• Partner with Customer Assurance, Hardware Partners, Product, Process Engineering and Operations to drive Customer Satisfaction improvement.
• Key liaison between printer hardware and supplies operation organization to coordinate activities & communication between both organizations during quality escalations & key product change management.
• Work closely with the Research & Development (R&D) and New Product. Introduction (NPI) teams to facilitate the smooth transition of NPI and extension products from R&D phase to manufacturing.

Individuals who do well in this role at HP, usually possess:

• Bachelor's degree in Engineering or related field.
• Excellent problem solving & critical thinking skills.
• Demonstrated leadership skills with the ability to lead cross-functional teams. and drive collaborative problem-solving.
• Excellent communication and interpersonal skills, with the ability to effectively interact with stakeholders at all levels & across different cultures.
• Possess growth mindset, self-driven personality & ability to think out-of-the box to find solutions to problems.
• Ability to work effectively in a fast-paced, dynamic environment with a focus on meeting tight schedules and delivering results.
• Occasional travel is required and might have to travel on short notices sometimes when there are field quality escalations.
• Possess good understanding of manufacturing quality control processes such as SPC & problem solving methodologies such as 8D.
• Proven experience in print system integration will be an added advantage.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices globally.

Job Description:

To manage and supervise the mechanic in the performance of preventive and corrective maintenance works on equipment, so that the equipment can function properly and operate safely.

Requirements:

1. Prepare and schedule preventive maintenance work plan.

2. Control of preventive work plan, and assign overtime works where necessary.

3. Adjustment and plan for corrective maintenance works.

4. Assist to carry out preventive maintenance works where necessary.

5. Responsible for the behaviour and works of the mechanics under his control.

6. Control and collect informations from customer relating to works, mechanics, etc.

7. Teach and conduct on-the-job training for newly employed mechanics.

8. Teach and conduct safety procedures of works.

9. Teach and conduct operating principles of the equipment to the owner.

10. Assist in the attendance of building or equipment inspections are required by-law.

11. Follow-up on the breakdown report and assist the mechanic on the breakdown works.

12. Assist in the reduction of Breakdown ratio.

13. Ensure proper record of drawings, files, documents relating to the maintenance work of the equipment.

14. Ensure proper record of all tools issued.

15. Ensure proper record of mechanics Annual leave, Sick leave, etc.

16. Assist in conducting investigation of damages/accidents to equipment or personnel.

17. Preparation of necessary reports on relating maintenance works.

18. Report to the Maintenance Supervisor/ Asst Engineer/ Officer/ Asst Officer on matters relating to the section.

19. Carry out any other duties as assigned by superior.

20. Conduct patrol checks on maintenance works.

21. Follow-up on QC and QA defects.

22. Liaise with officers on maintenance works.

23. Ensure compliance to Environmental Policy, reduction of waste and prevention of pollution.

24. Ensure equipments under his care is properly maintain.