Your Career

As a Cloud Escalation Engineer - Prisma Access, your role is pivotal in ensuring the smooth operation and improvement of Palo Alto Networks SASE products, particularly Prisma Access.

Your Impact  

Here's a breakdown of what your role entails and the qualifications required:

• Escalation Management - Assume a leadership role in resolving high-priority escalations, and be the interface between Development Operations and support teams to orchestrate swift and effective resolutions
• Tool Development - Develop tools tailored specifically for the Technical Assistance Center (TAC), aimed at enhancing visibility, automating troubleshooting workflows, and alleviating the operational burden on our esteemed Engineering/DevOps cohorts
• Post-mortem Analysis - Harness the power of data-driven insights as you meticulously dissect and analyze the resolution of escalated issues, leveraging these findings to drive iterative improvements in product robustness and support workflow efficiency
• Proactive Monitoring - Anticipate and preempt potential issues through the implementation of predictive monitoring frameworks, enabling proactive interventions to mitigate risks, bolster uptime, and ensure an unparalleled level of service reliability for our valued customers
• TAC Enablement - Deliver structured training sessions to empower our TAC teams with advanced troubleshooting techniques, deep insights into product intricacies, and proficient utilization of tools, thereby enhancing their ability to swiftly and adeptly address customer inquiries and challenges

Reporting to Sustaining Manager/Director of Engineering, successful applicant will provide electrical/hardware engineering services to the global business, covering a range of power supply failure analysis and product evaluation for mass produced power supplies. The incumbent will serve as the technical advisor to build up the Asia Engineering team's competences.

• Act as a subject matter expert or working towards becoming a subject matter expert (SME) for SMPS power supplies across the Asia business.
• Engage and support strategic collaboration with R&D, Manufacturing and Quality teams. Aligns with global objectives
• Challenge where appropriate and develop best engineering practice procedures and models to improve the process
• Troubleshoot SMPS power supplies to identify root cause, and provide feedback to Quality, Manufacturing & Design teams with recommendations to drive the improvement or design changes
• Provide test plan for impact study to mitigate risk due to design changes,
• Take technical responsibility and identify technical risks within projects and drive the solution.
• Ensure all customer returns are analyzed, perform tests and experiments as needed to support or confirm customer issues
• Write & distribute failure analysis reports to internal and external customers
• Advise sales/customer on delivery schedules of customers’ issues
• Develop and supervise junior engineers and technicians

PowerUp! SG Tech Traineeship, Backend

We are looking for enthusiastic problem solvers to join us in scaling our platform, to digitalise businesses in Asia, uplift rider livelihoods and build a hyper-convenient platform for our customers. If you love working with technology to create solutions and are not afraid to roll up your sleeves to get things done, you will find your tribe here at foodpanda. Our diverse and high-performing team comprises people from more than 60 nationalities, and we welcome all experiences, backgrounds, and perspectives.

About the role:

This role is a 6 months traineeship provided by foodpanda to build the next generation of engineers through classroom & On the job training provided for fundamentals of backend development using GoLang

What's on the menu:

• Experience working on foodpanda's world-class technology platform and learning the day-to-day activities that power it
• Working with a world-class team on developing impactful applications/features for millions of consumers.
• First-hand experience in building and operating high-scale services that serve millions of users
• Building maintainable software in large teams
• Be part of our flagship program and gain from our specially curated program for you!

What we can feed you:

• The opportunity to learn about building pragmatic software solutions to real-world problems
• The chance to work on a highly scalable and modern software application that serves millions of customers every day
• Attractive compensation, full-time staff benefits, annual leave, Tasty Thursday allowance
• Certificate of Completion by accredited training provider and foodpanda at the end of the program

foodpanda is proud to be a company that believes in diversity and representation as key to creating not only an exciting product, but also an amazing customer and employee experience. We hire people based on merit and qualifications and do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, or any other aspect that makes you, you. If you have a disability or special need that requires accommodation, please let your Talent Acquisition partner know.

To all recruitment agencies: foodpanda does not accept third-party resumes. Please do not send resumes to our jobs alias, foodpanda employees, or any other organization location. foodpanda is not responsible for any fees related to unsolicited resumes.

What You Will Do

CyberArk is looking for a passionate, self-driven and energetic Solutions Engineer for Presales in Singapore. In this role, you will combine technical knowledge with sales skills and are ultimately responsible for the technical win during the sales cycle. You are responsible for actively driving and managing the technology evaluation stage of the sales process and you will be working closely with the sales and product management team to advocate for our solution. You must be comfortable in a dynamic atmosphere of a technical organization with a rapidly expanding customer base. You must possess superior communication and interpersonal skills as you will be required to build relationships across multiple levels of the organizations. You must be organized and analytical, able to eliminate sales obstacles through creative and adaptive approaches.

• Technical pre-sales
• Technical Win of opportunity
• Technical Process & Escalations
• Proactively seek out new sales opportunities by developing new and existing relationships within prospective accounts and current active customer.
• Presenting CyberArk’s technical value proposition effectively
• Responding to functional and technical elements of RFIs/RFPs
• Ensuring the success of customer proof-of-concepts (POCs) and proof-of-values (POVs)
• Creating and Designing the CyberArk Solution
• Convey requirements to Product Management teams
• Support from a technical perspective, CyberArk and partner seminars and industry trade shows
• Develop technical knowledge of CyberArk and associated technologies
• Assume the role of a mentor to other solutions engineers when appropriate
• Create training content for the SE organization when appropriate

LI-ZL1

Roles & Responsibilities

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

-Degree holder with about 4 years’ experience

-experience in design and implementation.

-Able to multi-task and work in a fast paced environment

-Possess initiative, drive and ability to work independently

-Good interpersonal/communicational skills

-Experience as a consulting in the construction industry is a pre-requisite

Your Career

As a Systems Engineer, you’ll enable sales engagements into a set of large new enterprise accounts. You will play a key role in navigating complex accounts to generate and deliver winning proposals, contract bids, statements of work, and RFI/RFP responses. It is business critical to meet and exceed sales quotas by building and implementing strategic account plans targeting enterprise-wide deployments of the Palo Alto Networks Next-Generation Security Platform. 

Your Impact

• Establish yourself as a trusted advisor to prospects and customers working with your Account Manager and the local partners within your territory
• Identify and document specific problems with prospective and current customers which can be solved through the deployment of integrated solutions
• Architect and propose validated solutions which address the identified cybersecurity problems in each unrivaled environment
• Ensure ongoing customer happiness, support, and adoption
• Continuous self-improvement and learning to maintain technical leadership of applicable technologies (data center, SDN, public cloud, security, networking, etc.)
• Understand and effectively differentiate against our top competitors
• Act as the customer advocate for any issues that require technical assistance and follow up with the customer until the issue is resolved

Job Description

• Support Tender Team in preparation of Construction Programme / Planning
• Prepare Project Execution Plan / Logistics Plan / Construction Plan / EHS Plan / QAQC Plan
• Project Controls including Contract Administration regard to Time Impact Analysis / Implications, supporting Contracts Department in preparing and serving Contractual Notices (Time Implications)
• Support Contracts Department in analysing, preparation and apply Extension of Time for Completion
• Coordinate with Project Team in producing baseline programme using Primavera P6 / MS project
• Coordinate with Contract Team in cost-loading the baseline programme using Primavera P6 or MS Project
• Coordinate with Project Management team and share the baseline programme with all project stakeholders
• Coordinate and monitor critical/ major site activities with all the Project key personnel and generate a 12-Week rolling forecast
• Weekly updates of the master schedule Using Primavera P6 / MS Project (by Project Managers)
• Prepare and submit weekly / monthly project status (site progress) to document controller for weekly/ monthly report compilation (by Project Manager)
• Responsible of giving cut-off dates for all submissions & approval (Shop drawings, materials, and Authorities’ submission) in conjunction with the baseline programme.
• Conduct time impact analysis on all change orders/ variations and provide advice to the project team.
• Notify the project team (weekly basis) of the all the major works that are less float, near critical, and critical with reference to the master programme (by Project Manager).
• Responsible for investigating the cause of delay & major slippage of works
• Coordinate with Project team and put-up strategic delay mitigation plan
• Work with Contracts Department and ensure issuance of Notice of Delay / Extension of Time
• Any other duties as may be assigned.

Qualifications:

• Bachelor’s degree in Civil Engineering, Construction Management, or a related field.
• Proven experience as a Planning Engineer in construction or related industries.
• Proficiency in project management software (e.g., Primavera P6, MS Project).
• Strong understanding of project management principles and methodologies.
• Excellent analytical and problem-solving skills.
• Effective communication and interpersonal skills.
• Ability to work under pressure and meet deadlines.
• Attention to detail and organizational skills.

When you’re part of the team at Thermo Fisher Scientific, you’ll do important work. Surrounded by collaborative colleagues, you’ll have the support and opportunities that only a global leader can give you. Our respected, growing organization has an outstanding strategy for the near term and beyond. Take your place on our strong team, and help us make significant contributions to the world.

The Sr Product Security Researcher, Product Security has global responsibility for the security associated with the company’s Product Security program. They will perform research, testing and validation of a product and its associated platforms, and guide integration of solutions within the overarching CIS program. This includes policy, security awareness & education, application and vulnerability assessments, technological security controls and risk evaluation. The solutioning activities must support relevant Thermo Fisher products (such as instruments, devices, equipment, and other electronic and/or connected devices) and infrastructure.

Key Responsibilities:

• Work closely with key product development leaders to ensure security is incorporated in all product offerings.
• Support efforts to inject security into all levels of the product development process.
• Drive secure development and integration of security features into all phases of product, firmware and software design and development.
• Lead programs to ensure continuous development and improvement of security integration into the product development lifecycle.
• Partner with architecture and development teams to develop shared security frameworks to enable consistent application of secure coding standard methodologies across the enterprise.
• Build working relationships with product development partners to maintain and improve product and application security processes.
• Assist to maturing process, policy, and standards guidance.
• Educate key partners on program, risks, and importance of security in our products and environment.
• Work with business units to identify, collect, call out, and close security vulnerabilities found in Thermo Fisher products and infrastructure; Leverage tools to deliver vulnerability information back to the development organization for remediation.
• Mentor others in what constitutes secure product activities.
• Perform research activities on existing and in development products and/or infrastructure to resolve security capabilities and discover unknown risks.
• Build testing approaches and perform testing activities on products and/or infrastructure to resolve vulnerabilities, validate remediation, and reduce overall risk profiles.
• Proactively ensure that applicable regulatory mandates are addressed with appropriate controls.
• Coordinate/participate in and perform design reviews, peer reviews, and code reviews.
• Ensure excellent consistency, documentation, and process across all programs.
• Coordinate with security risk assessments for new and existing products through the risk assessment team.
• Collaborate with other groups (e.g., Risk Management, Internal Audit, HR, Legal, etc.) to direct compliance issues to appropriate existing channels for investigation and resolution.
• Creation of product whitepapers throughout the product lifecycle.
• Creation of security bulletins to address new or evolving threats to products and infrastructure.
• Travel up to 25% and on-call/after hours duties may be required.
• 
  

Minimum Requirements/Qualifications:

• Deep knowledge of IoT and digital device research methods, variables and parameters including analysis, testing and documentation.
• Deep understanding of cryptography, authentication, authorization, network security protocols, and application security.
• Solid understanding of how to connect new and changing threats to IoT portfolio to build mitigating or compensating activities.
• Strong exposure to popular application security standards including OWASP TOP 10, CSC 20 etc.
• Bachelor’s Degree in Information Assurance, Information Security, Management Information Systems, Risk Management, or Computer Science (Master’s Degree a plus) or equivalent field experience.
• Relevant technical certificates a plus (OSCP, SANS, GIAC, etc).
• 5+ years of related work experience with security consulting, product security, secure software development, risk assessment, and/or vulnerability management.
• Solid interpersonal and documentation skills are a must.
• Ability to explain and promote technical concepts.
• Solid attention to detail, organizational skills.
• Strong customer service skills required.
• Excellent verbal and written communication skills and the ability to communicate professionally with a diverse group, executives, managers, and domain experts.
• The ideal candidate will have hands on experience in one or more of the following areas: Hardware System Integration, Signal and Power Integrity, RF Systems, Wi-Fi, Bluetooth, Wireless Communications, TCP/IP, Network and Application Penetration Testing.

Benefits

We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation!

We are looking for a skilled Data Engineer with a strong background in Python, PySpark, Spark, and SQL. The ideal candidate will have experience in building and optimizing data pipelines and architectures. This role requires a collaborative professional who can work across teams to design and implement robust data solutions.

Key Responsibilities:

• Design, build, and maintain efficient, scalable, and reliable data pipelines using Python, PySpark, Spark, and SQL.
• Collaborate with data scientists, analysts, and other stakeholders to understand data needs and deliver appropriate data solutions.
• Develop and optimize ETL (Extract, Transform, Load) processes to ensure data quality and integrity.
• Implement data processing workflows for batch and real-time data integration.
• Monitor and troubleshoot data pipelines, ensuring data accuracy and availability.
• Perform data exploration and analysis to support business decisions.
• Document data processes, architectures, and workflows.

Proven 4+Years of experience as a Data Engineer or in a similar role.

Strong proficiency in Python and PySpark for data manipulation and transformation.

Hands-on experience with Apache Spark for large-scale data processing.

Advanced SQL skills for data querying, transformation, and performance tuning.

Familiarity with cloud platforms (AWS, Azure, Google Cloud) and their data services.

Experience with data warehousing concepts and technologies (e.g., Redshift, BigQuery, Snowflake).

Knowledge of best practices for data architecture and data governance.

• To design and independent review of design submissions of major structural engineering works. 
• Undertake structural analysis, calculations and prepare design sketches and drawings indicating arrangement and design intent for a variety of transportation structures. 
• Involved in prestressed/post-tension concrete and steel structure design 
• Conduct engineering assessments and evaluations related to existing structures and/or structural alternatives and prepare technical reports documenting the results. 
• Liaise/coordinate with other disciplines/departments in preparation of reports and design packages for multi-disciplinary projects. 
• Communicate with clients, sub consultants, approving agencies, etc. for purposes of obtaining design information, presenting design alternatives, and expediting approvals 

• Reports to Planning Manager
• Responsible for planning the overall project schedule
• Review and monitor the progress of the project in production, delivery, and installation of Precast Segmental/Method bridge/Advance works associated with Road Diversion/Utility Diversion
• Manage overall program, review, report, and monitor the schedule to identify risks and control project
• Coordinate with clients & report the reason for delay, potential risks, and mitigation measures in consideration of understanding the overall work sequence with planned resources

Job requirements:

• Degree in Civil Engineering or equivalent
• Minimum 5 years of relevant experience for infrastructure projects
• Experience in design & construction of At-grade road widening including all associated junction improvements and realignment/reconstruction of its associated slip and service roads
• Experience in design & construction of new vehicular viaduct structures, ramps & other road bridge-related works.
• Familiar with all stages of the development cycle for LTA Design and Build projects.
• Proficient in Primavera P6 (mandatory), Ms Office, Autocad
• Location : Woodlands
• Project : Viaducts

Key Responsibilities and Accountabilities :

• Perform engineering calculations, analysis, and design tasks.
• Develop technical specifications, drawings, and schematics for various engineering projects.
• Collaborate with other engineers and professionals to develop project plans and ensure compliance with industry standards and regulations.
• Conduct research to support engineering projects and stay updated on emerging technologies and best practices.
• Coordinate with project teams and stakeholders to ensure timely completion of deliverables.
• Participate in meetings, presentations, and reviews to communicate project progress and address any concerns.
• Conduct quality checks and reviews to verify the accuracy and integrity of engineering drawings and documents.

Requirements :

• Minimum Diploma in Civil Engineering or equivalent preferred.
• Minimum 3 years experience
• Have initiative and willingness to learn
• Able to work with minimal supervision
• Good communication skills

Reporting to the Director of Engineering, successful applicant will be the subject matter expert in switching mode power supply design and solution. The incumbent will be involved in solutioning and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product. 

Responsibilities

• Design new platform solution for power supply & power system products within XP standard design practice, safety guidelines and in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost.
• Lead project planning to identify critical path(s) and provide direction to mitigate risk.
• To perform tests and experiments as needed to support or confirm the design with written report. For both the new product design and legacy product failure analysis
• Reviews product designs for compliance with engineering principles, company procedures, safety, and other agency requirements
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to internal/external customer.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging.
• Provide technical support to factory on design related issue.
• Provide coaching and guidance to engineers and technicians in evaluation and design.
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training.
• Provides technical direction to the team.

· Prepare and submit quotations, and follow-up on all enquiries to new and existing customers in a timely manner.

· Select appropriate pumps / valves / equipment / system and / or accessories, suitable for different application, as per requirements.

· Liaise with sub-contractors / suppliers / stakeholders on pricing as per tender specifications and requirements.

· Generate costing sheet as per tender requirements, within a given time frame, and in accordance to company gross margin guideline.

· Respond to customers queries on quotations submitted.

· Follow-up with clients on the price positioning, tender status and maintain good customer business relationship.

· Upon receipt of order, ensure proper hand over of purchase order with all back-up papers and price calculations, to order processing department.

· Provide support to outside sales team and maintain close liaise with various department to achieve company objectives and targets.

· Update technical documentation and price lists.

· Ensure validity of pumps / valves certification with relevant authorities and application / submission of renewal on yearly or bi-yearly basis; where relevant / applicable.

· Any other ad-hoc duties as per assigned by HOD.

About the job

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add a Quality Engineer (QMS) in Singapore. The position is based in our Univac Site at Woodlands.

As a Quality Engineer (QMS), you will:

Support the Quality Manager to establish & maintain an effective and best-in-class quality management system & processes in compliance to 21CFR Part 820 QSR, ISO 13485 & ISO 9001 Quality Management System standards, and meeting customers as well as relevant statutory & medical device regulatory requirements.

The key roles and responsibilities are as below:

• Establish, implement, and maintain quality systems in accordance with ISO standards such as ISO 13485, ISO 9001, ISO 14001, and FDA 21 CFR Part 820.
• Develop and manage internal audits and audit schedules; lead a team of auditors to ensure compliance with FDA 21 CFR Part 820 and ISO 13485.
• Promote continuous improvement in all aspects of quality matters.
• Optimize site processes to ensure high performance.
• Oversee document control functions.
• Manage operational efficiency through proactive oversight of the CAPA process.
• Initiate programs to standardize training and increase efficiency.
• Manage external audits conducted by certification bodies, regulatory agencies, or customers.
• Prepare executive presentations for management review.
• Perform any other tasks as assigned.

What skills and experiences are we looking for?

• Diploma and/or Degree in any technical disciplines with at least 3 years of QA/QC working experience in a medical related industry.
• Familiar with the Quality Management Systems requirements such as ISO9001, ISO13485, and 21CFR Part 820 QSR preferred.
• Knowledge in IATF16949 will be an advantage.
• Excellent analytical, presentation, written and verbal communication abilities.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Venture Family.

---- Communication will be extended to candidates who have successfully advanced in the selection process ----

Job Descriptions:

• Coordinate the civil trenching works and liaise with authorities and project officers

• To process, submit and coordinate of project claiming

• Preparation of TCP and NCE application

• Following specifications and calculations to create various technical drawings

• Identifying and communicating potential design problems to the rest of the team

• Be responsible for other duties that may be assigned by the management from time to time

• Ensure timely submission of reports for completed projects

• Able to perform work when required

• Other ad-hoc duties as assigned

Job Requirements:

• Degree in Construction Engineering

• Minimum 3 years of working experience in the construction (preferable in cable) industry

• Proficient in Microsoft Excel, Word and PowerPoint

• Ability to multi-task, adapt and quick on feet to handle challenges on site

• Proactive attitude, self-motivated, strong problem-solving ability and communication skills

• Proficiency in AutoCAD

• Remuneration: Up to $5800 + Fixed Allowances $280
• Rewards: Enjoy AWS and Variable Bonus
• Location: Jurong Island, Transport Provided at Designated Point
• Company: MNC Chemical Manufacturing Industry

Role Overview:

Our client is seeking a dynamic individual to lead the mechanical team in overseeing inspection and maintenance activities within chemical plant. If you have a passion for ensuring operational excellence and thrive in a collaborative environment, this role is for you.

Responsibilities:

• Lead a team of mechanical supervisors and contractors in executing plant inspection and modification works promptly and safely.
• Manage the plant painting program to uphold facility integrity.
• Coordinate with various stakeholders to ensure seamless execution of plant modification works while prioritizing safety and facility integrity.
• Conduct training sessions to enhance the skill and competency levels of staff and contractors.
• Implement management systems aligned with ISO standards, ensuring adherence to quality and environmental regulations.
• Maintain meticulous documentation and filing of inspection records using our Data Management System.

Requirements:

• Bachelor's degree in Mechanical Engineering or Material Engineering.
• Minimum of 2 years' experience in fixed equipment and piping inspection within the chemical, petrochemical, or oil and gas industry.
• Proficiency in corrosion under insulation (CUI) or coating inspection preferred.
• API certification is advantageous.
• Strong analytical and problem-solving skills.
• Excellent communication abilities with cross-functional teams and contractors, fostering a spirit of collaboration and teamwork.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

We are seeking a skilled Design, Verification, and Test Senior/Engineer to join our team focused on testing and validating the performance and functionality of our products, which integrates mechanical, electrical controls, and software components. The ideal candidate will play a critical role in ensuring the reliability and quality of our product through comprehensive testing and verification processes.

Key Responsibilities:

• Collaboration with product development teams to understand design requirements and

specifications for the product.

• Design and implement test strategies and plans to validate the performance, functionality, and safety of the integrated hardware (mechanical and electrical controls) and software components.

• Develop and execute test protocols and procedures for functional, regression, and system- level testing.

• Conduct hands-on testing of the machine in both controlled laboratory settings and real-world operational environments.

• Utilize a combination of manual testing and test automation tools to streamline testing processes and improve efficiency.

• Identify and troubleshoot hardware and software issues, and work closely with design engineers to resolve them.

• Analyses test results and generate comprehensive reports documenting findings, issues, and recommendations.

• Collaborate with cross-functional teams (including design, manufacturing, and quality assurance) to ensure compliance with industry standards and regulatory requirements.

Job Requirement:

• Bachelor’s Degree or Diploma in Electrical Engineering, Mechanical Engineering, Computer Engineering, or related field.

• Proven experience in testing and verification of complex systems, ideally involving integrated hardware (mechanical and electrical) and software.

• Strong understanding of mechatronics, electronics, sensors, actuators, and control systems.

• Experience with hardware testing tools and equipment (oscilloscopes, multimeters, data loggers, etc.)

• Proficiency in scripting languages (Python, MATLAB, etc.) for test automation.

• Familiarity with software testing methodologies and tools (e.g., test management software, version control systems).

• Ability to interpret technical drawings, schematics, and specifications.

• Excellent problem-solving and analytical skills with meticulous attention to detail.

• Strong communication skills and ability to collaborate effectively in a team environment.

• Knowledge of industry standards and regulations related to machine safety and performance (e.g., ISO, IEC standards).

• Familiarity with reliability engineering principles and techniques.

• Hands-on experience with mechanical testing and instrumentation.

• Previous experience in product development and lifecycle management,

• Remuneration: Up to $5800 + Fixed Allowances $280
• Rewards: Enjoy AWS and Variable Bonus
• Work Location: Jurong Island, Company Transport Provided at Designated Point
• Company: MNC Chemical Manufacturing Industry

Responsibilities: 

• Lead a team of mechanical supervisors and contractors in performing plant maintenance, modification, and construction activities to ensure timely and safe execution with good maintenance practices.
• Coordinate with plant operators and other maintenance groups to execute maintenance and modification works without compromising safety and facility integrity.
• Conduct mechanical studies and modifications of plant facilities according to technical specifications and business requirements.
• Perform technical investigations on equipment troubles, evaluate findings, and recommend effective countermeasures to prevent recurrences.
• Arrange training for staff and contractors to enhance their skill and competency levels.
• Respond to plant emergency calls and resolve mechanical issues within tight schedules.
• Implement management systems based on ISO 9001, ISO 14001, ISO 450001, and SS651 standards.

Requirements:

• Possess a Degree in Mechanical Engineering.
• Minimum 2 years of relevant work experience in mechanical facility maintenance in the oil, petrochemicals, or power industry.
• Hands-on experience in troubleshooting and repairing Rotating Equipment such as heat exchangers, pressure vessels, agitators, pumps, compressors, and blowers.
• Proficiency in Microsoft Office applications, with basic knowledge of SAP applications being advantageous.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting
• Designing processes, materials, tools, and systems.
• Making improvements to existing processes, materials, etc.
• Implementing solutions and designs.

Engineer Requirements:

• Strong problem-solving, communication, and listening skills.
• Experience in Project Management.
• Good command of secondary engineering tools (AutoCAD, Engineering Base).
• Strong oral and written communication skills. Ability to document, plan, market, and execute programs.

The Facade Engineer forms part of the engineering team within the global structure of the company and assumes general responsibilities that pro-actively contribute to the growth of Façade/Structural engineering capabilities and all other disciplines across the globe. 

This includes responsibility for all design, engineering, documentation, administration and compliance with project constraints undertaken for Façade and all other disciplines. You will also need to fulfill legal responsibilities commensurate with your position.

The following is an overview of responsibilities and performance standards required of the Façade Engineer (including Façade Access and Maintenance):

• Major Function
• Project Operation / Management
• Customer / Client Service
• Technical Quality Control
• Mentoring, Training and Personal Growth

Major Function

Duties include but not limited to:

• Provide detailed engineering computations and analysis as required for report submissions
• Provide façade and façade access & maintenance engineering design and buildability consultancy, including material knowledge and installation techniques
• Provide design sketches and reports required for schematic, design development and constructions phases of projects
• Coordinate with client consultants such as architects, structural, ESD and acoustic engineers in other practices to determine best façade design outcomes
• Attend meetings with Clients and Architects to discuss Project and Design details and contribute to discussions/design process
• Review shop drawings and calculations from contractors
• Attend site/factory/mock-up test inspections and produce detailed reports
• Provide regular updates of Project progress to supervisor
• Assist in reviewing tender returns and make recommendations
• Carry out research on potential facade materials and share knowledge/update technical library
• Keep up to date with engineering software new to the market that will help develop our business
• Evaluate opportunities for improved efficiencies and effectiveness in consultation with management including identifying, developing and implementing standards, systems, tools and processes to support continuous improvement within the business
• Take an active interest in the other disciplines (Lighting, Acoustics, Building Physics, Logistics etc..) in order to further develop your specialist skills

Project Operation / Management

You shall be responsible for efficient and profitable completion of all projects and tasks under your control whilst maintaining excellent technical standards and client satisfaction.

Detailed responsibilities and/or targets include:

• Cost planning and output required to meet project budgets
• Managing clients to secure work, marketing and fee proposals
• Allocation and management of time to suit programs and project budgets
• Ensure projects are completed on-time and without cost overrun
• Ensure high technical standing on the project such that client complaints do not arise

Customer / Client Service

You shall continually strengthen client loyalty and gain repeat business by providing high quality service and creative (‘Leading Edge’) solutions to clients by way of:

• Communicate with clients to establish their needs and maintain a dialogue throughout the project
• Maintain an exceptional favourable record in client response to timeliness and quality of work provided
• Continually aim for repeat business from all clients in contact with Inhabit

Technical Quality Control

You shall assume full responsibility for work quality undertaken and a senior Peer Review/Checking Role on projects, including:

• Identification of technically complex projects and problems that require high level input
• Provision of concept design, peer review and checking services on international projects to assist in maintaining high standards
• Taking necessary action to prevent the occurrence of design documentation and/or quality system non-conformity
• Ensure all project documentation is maintained to a level as required by Inhabits’ Quality Manager and QA system
• Endorse and facilitate the quality management system (QMS) and the Business’s commitment to quality

Mentoring, Training and Personal Growth

• Be responsible for assisting in the professional and technical development of junior staff and assisting in the technical development of Inhabit
• Grow and develop in professionalism and job effectiveness through reading Inhabits’ technical notes and contributing to the development and improvement of the technical notes on an active basis
• Participate in educational programs and skill-based training as required
• Coordinate, participate and actively contribute to design workshops, where facade solutions are explored and determined.  Workshops may be with architects, suppliers and fellow professionals and with the facade industry
• Ensure that personal goals are set and targeted for personal development

• Perm with AWS and Bonus
• Comfortable to work at Tuas and shift work (10am to 10pm / 10pm to 10am)
• Must have existing Registered Class 2 Steam Engineer certification with MOM.
• Proficient in FMEA, HAZAOP, and Job Hazard Analysis methodologies

Job Description

• Ensure smooth and safe facility operations, focusing on steam system and auxiliaries.
• Monitor plant status through control systems, including BMS and distributed control systems.
• Conduct regular inspections to maintain safe operating conditions.
• Lead boiler and plant operators in compliance with treatment processes and emission limits.
• Identify optimization opportunities and support implementation of approved tasks.
• Develop and implement Standard Operating Procedures for plant operations and maintenance.
• Analyze and report on steam operations data and plant performance regularly.
• Respond to plant upsets and equipment malfunctions swiftly.
• Conduct routine equipment inspections and testing for safety and efficiency.
• Maintain accurate maintenance logs in CMMS for equipment safety.
• Monitor facilities for hazards and ensure compliance with safety regulations.
• Collaborate with management to enhance process efficiency and reduce costs.
• Ensure Workplace Health and Safety Act compliance.
• Fulfill additional duties assigned by the site manager.

• Holds a Class 2 Steam Engineer registration with MOM.

• Proficient in FMEA, HAZAOP, and Job Hazard Analysis methodologies.
• Possess strong interpersonal, management, and decision-making skills.
• Demonstrate innovative thinking and effective problem-solving abilities.
• Registered First-Aider Certification is advantageous.
• Exhibit a strong safety mindset and adherence to Workplace Safety and Health (WSH) practices.

Triton AI Pte Ltd
Registration Number: R1980724
EA: 21C0661

• Perm
• AWS
• Bonus
• Transport + Shift Allowance
• Medical & Insurance Coverage

SHIELD is a device-first risk AI platform that helps digital businesses worldwide eliminate fake accounts and stop all fraudulent activities. SHIELD identifies the root of fraud with the global standard for device identification (SHIELD Device ID) and actionable risk intelligence, empowering businesses to stay ahead of new and unknown fraud threats. We are trusted by global unicorns like inDrive, Alibaba, Swiggy, Meesho, TrueMoney and more. With offices in San Francisco, Miami, London, Berlin, Jakarta, Bengaluru, Beijing, and Singapore, we are rapidly achieving our mission – eliminating unfairness to enable trust for the world. 

Responsibilities

• Develop a fast and efficient JavaScript module to collect data points from user browsers.
• Develop an automated testing suite of the module on multiple browsers on multiple platforms.
• Setup and test the module against malicious tools and the latest anti-fingerprinting technologies.
• Research on the latest browser anti-fingerprinting technologies and as well as the latest browser technologies.

• Minimum Bachelor's Degree in Computer Science, with a strong knowledge of Web Security and Networks
• Experience in JavaScript language is a must
• Passionate and curious about web security and private browsing technologies
• Strong analytical, interpersonal, communication, and presentation skills

Team Summary:

The Client Services Team provides industry-leading operational support to Visa’s clients around the world. With our deep knowledge and expertise, we bring the voice of the customer into the design, development and successful deployment of Visa products and services. We are trusted partners to Visa’s clients, providing expertise to support and successfully grow their business.

The Client Test team is part of Visa's Global Client Services group. We deliver quality services and solutions using best-in-class processes, methodologies, and technology with our worldwide workforce. We are an integral part of revenue-generating areas within the company. This team is dedicated to its customers and to building on past achievements. We are committed to leveraging innovative technology to enhance quality and to accelerate time-to-market. Visa has one of the most visible and most used comprehensive payment systems in the world.

What a Senior Software Test Engineer does at Visa:

This is an individual contributor role responsible for identifying and resolving issues of simple to moderate complexity. This position is at an intermediate professional level and requires strong execution and analytical abilities. This role works independently and receives minimal guidance only in the most complex situations. The role will analyze and troubleshoot user requirements, procedures and problems to automate or improve existing systems under broadly defined practices and procedures, including working with developers in analyzing and developing process improvements for system administration and environmental build functions.

In this role, you are expected to:

• Responsible for programming, testing, implementation, documentation, maintenance and support of systems application software.
• Design, create, execute and report on functional tests against multiple applications.
• Research, create and evaluate technical solution alternatives for the business needs.
• Follow standards in development and testing to ensure compliance with Audit Requirements.
• Follow Quality Control processes according to the Industry Standard practices.
• Actively look for opportunities to enhance standards and improve process efficiency.
• Identify and document software defects in a clear manner and retest using corrected code to resolve the issue in a timely manner.
• Identify and troubleshoot system issues working with development as required.
• Design, document and track test cases in tracking system.
• Identify opportunities for process improvements and efficiencies.
• Work with business representatives, IT Management, IT development, support teams and vendors to ensure on time, on budget, and quality delivery of testing deliverables.
• Coordinate and collaborate with a globally distributed team.
• Support clients in the CEMEA region hence the usual working hours are from 11am-8pm, Singapore time.

Why this is important to Visa

The successful candidate will be part of a global team to design and develop test designs and cases for the Global Client Testing Organization. The individual will perform functional and automation testing for Visa Processing Services applications and will need detailed analytical skills and a good understanding of the test methodologies to be able to interface directly and make decisions with staff members of Global Client Testing, Product Management, Project Management, Client Implementations and Development.

Projects you will be a part of:

As part of the team, you will get an opportunity to work on strategically important projects for Visa and our Clients.

• Support client testing requirements
• Participate in internal projects e.g. self-testing tools and technical specifications providing insights on country-specific user requirements

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office three days a week - Tuesdays, Wednesdays and Thursdays.

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· At least 2 years working experience in air-conditioning & mechanical ventilation system

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Minimum diploma or Mechanical Engineering

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

We regret that only shortlisted candidates will be notified.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits