• Scheduling of installation, co-ordination with customers, internally, PE, LEW and vendors, seeking approval of installation from tenants of building, accurate and timely submission of documents, etc
• Coordination work with Customers, Building Owner/Management
• To be responsible for the Implementation Activities such as preparation of proposal and submission of design, obtaining of approval, monitoring of in-house team and contractors’ work schedule and BOQ claims, I&C and using measurement tools for troubleshooting.
• Generate project documentation such as survey report/technical proposal/As-built report
• Manage weekly report tracker update and report to project manager.
• Submission of project documentation to client
• Generate project documents templates
• Prepare TP / As-Built reports
• Conduct documentation control training

Job Requirements:

• Diploma / ITE in Engineering, either in the area of communications or RF Wireless Communications
• At least 2 years of relevant experience in telecom wireless industry
• Basic RF (Radio Frequency) / Telecommunication knowledge
• Ability to operate, analyze, test and read measurements in Radio Frequency and able to use TEMS / Nemo / Site Master is essential
• Basic M&E (Electrical and Mechanical) Knowledge
• Basic cellular network communications knowledge, configuration and operations
• To perform project coordination and control duties and auditing, etc
• Able to commission / integrate / troubleshoot / test Ericsson equipment is an added advantage
• Good team work and interpersonal skills
• Hands-on knowledge on autocad drawing is an added advantage
• Good command of English
• Preferably Singaporean

Element has an opportunity for a Sales Engineer. In this role you will be an inside seller, responsible for establishing and maintaining strong relationships with a defined group of Element clients and prospects.

You will expand business with dormant and existing accounts, provide increased touch points for accounts, and is budget responsible for 200+ growth and retention clients. It will be your responsibility to assure customer satisfaction through all stages of the sales process. In addition to client relations, this role will interact with the broader Element Sales Team, General Manager, and lab/technical personnel. The ideal candidate will be action oriented, customer focused and have an entrepreneurial drive.

Job Duties:

• Establish and proactively maintain a strong professional relationship with key decision makers and influencers within assigned accounts
• Identify current and future customer service requirements by establishing personal rapport with potential and actual customers, acting as a liaison between the customers and Element
• Identify opportunities early in the sales cycle to ensure maximum share of wallet for Element
• Qualify opportunities with assistance of inbound team / specialists
• Manage relationships and utilize technical support to assist in Sales
• Follow up in a timely manner on quotations for the assigned customer base
• Actively utilize CRM to record activities, ensuring contact details are accurate, duplicates are removed, new information is added and accurate call / visit logs are entered
• Actively participate in regular pipeline reviews, ensuring all CRM records are up to date and critical success factors are identified for key opportunities
• Achieve sales goals by converting and penetrating accounts
• Build and maintain a working knowledge of Element’s service offerings; participate in training/coaching opportunities
• Ensure compliance with all Element policies including but not limited to terms and conditions, trade compliance, treatment of others, moral code of conduct, and employee handbook
• Ensure adherence to all applicable laws pertaining to safety, environment and corporate governance

Job Requirements:

• Approximately 3 years of Business Development, Sales or Account Management experience
• Ability to read and interpret documents such as customer quotes / contracts, marketing materials, and customer testing specifications
• Ability to write routine reports and correspondence and speak effectively before groups of customers or employees of organization
• Ability to calculate figures and amounts such as discounts, interest, commissions and proportions and apply concepts of basic algebra and geometry
• Ability to solve practical customer problems and interpret a variety of instructions, data and details furnished in written, oral, diagram, or schedule form
• A valid driver’s licence, with an acceptable driving record under Element’s policy
• Experience in interpreting testing procedures and requirements desired
• Proficiency in Microsoft Applications (Word, Excel)
• Availability, flexibility, and maturity to represent the company at a broad range of events / projects in the community, with customers and within the company
• Ability to remain calm when faced with mounting pressure related to deadlines and multiple priorities
• Well-developed oral and written communication skills to meet a variety of communication needs
• Good interpersonal skills that foster open upward and downward communication built on mutual respect
• Ability to interface with clients, win new work and determine their requirements; helps develops proposals including cost estimates, work plan and terms and conditions
• Some overnight travel may be required

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

Job Duties:

• Perform source emission sampling work at sites and quality check on instrument prior to site deployment
• Lead sampling team in conducting tests
• Able to work under the dun in client's process areas
• Data entry using site information to generate test reports
• Assist Principal Engineer in method development

Job Requirements:

• Degree in Environmental or Chemical Engineering
• Physically fit and required to work at height
• Candidates with experience in Indoor Air Quality Testing, Microbiology Testing and Source Emission Testing will have an added advantage
• Possess valid Class 3 Driving Licence and have excellent interpersonal and communication skills
• A team player who is able to multitask

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Responsibilities:

1. Pre-sales and post sales activities in alignment with the Product Strategy for their respective countries in APAC region. Follow through on projects including planning and management

2. Constantly identifying, develop and explore new business opportunities with the customer to address the fast-emerging market need.

3. Responsible for tender/RFQ/RFP and provide support throughout project lifecycle

4. Coordinate closely with both internal and external stakeholders from project planning to deployment stage by ensuring timeline are met.

5. Responsible for gathering technical requirement and developing cost effective design solution for customers

6. Prepare and report regular updates to track key projects

7. Actively involved in engaging industry stakeholders in power solution sector to identify the customer needs and propose solution

8. Perform study and provide insight on competitor and market landscape analysis.

9. State product performance and characteristics to customers from a technical perspective

10. Be familiar with the technical route, technical standards, technical parameters and technical specifications of products

11. Be familiar with product related hardware, software, interconnection, app and other principles and logic

12. To respond to customer calls to troubleshoot technical problems of equipment, on-site inspection and attend emergency repair, to achieve customers’ satisfaction in turnaround time and minimize downtime

Requirements:

· Higher Diploma / Degree in Electrical Engineering & or other relevant Engineering qualifications

· Minimum 2 years of relevant experience in the related industry; junior candidate will be considered as well

· Experienced in handling power devices / power electronics / communication modules / electrical wirings

· Possess good analytical and problem-solving skills, exceptional interpersonal skills, attention to detail

· Candidate with sales experience will be an advantage.

· Ability to present ideas in a clean & user-friendly way

· Results oriented, self-driven, and a team player

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

Responsibilities:-

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Some responsibilities of a project engineer include:

• Planning, scheduling, predicting, and managing technical tasks
• Solving complex problems, such as transportation planning and grid interconnection
• Making decisions
• Providing leadership
• Using math skills
• Managing projects
• Communicating effectively

Project engineers are concerned with the engineering aspects of a project, while project managers are concerned with the business aspects.

Duties & Responsibilities:

• Study drawings for the projects and understanding requirements
• Determine operation requirements and preparing schedule
• Liaise with internal/external parties for the execution of works
• Ensure timely delivery of projects according to schedule
• Updating of project records for reporting purposes and submission of reports
• Attend site meetings and resolve technical/operational issues independently
• Undertake ad-hoc duties related to project execution
• Any other ad-hoc duties assigned

Requirements:

• Diploma/ Degree in Civil Engineering or any equivalent
• Min. 2 years of experience
• Able to work independently and as a team
• Good communication and interpersonal skills

1. Assist M&E/ Design Consultants in reviewing the design intend and identify system discrepancies or improve system performance if necessary.
2. Carry out value engineering to the system whenever necessary without compromising the system performance and compliance to the local authorities’ requirements / Local Code of Practices.
3. Perform Equipment selection in accordance to the engineering calculation done and approved by M&E Consultants.
4. Perform sizing and selection of the Electrical system material in accordance to the engineering calculation done and approved by M&E Consultants.
5. Liaise with the equipment suppliers and material suppliers to ensure selection of the equipment are relevant and compliance to the technical specification/requirements.
6. Prepare technical submission to M&E Consultants for approval and follow up on the comment (if any) related to the submission.
7. Work closely with the associate team members to see that overall Electrical system design development are meeting the design intend of M&E Consultants.
8. Take charge in the overall planning and execution of Electrical system Testing & Commissioning.

About the Role:

We are seeking a motivated and detail-oriented Junior Test Engineer to join our team. In this role, you will be responsible for ensuring the quality and reliability of our operations system through testing and continuous improvement. If you are passionate about quality assurance, have an eye for detail, and are eager to grow in the field of software testing, we would love to hear from you!

Objectives of this Role:

1. Ensure the highest quality of our operations system by developing and executing tests to detect and report any errors in the product.

2. Develop suitable testing plans and frameworks that align with our customers' needs.

3. Coordinate with various functions and teams to incorporate necessary product changes.

Responsibilities:

1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.

2. Able to leveraging on inhouse GenAI for test case creation and enrichment

3. Ensure test runs and results are completed within the given time frame.

4. Develop and execute test plans to validate software functionality against requirements and specifications.

5. Identify, report, and track software defects and issues.

6. Perform functional, performance, security, and regression testing of software products.

7. Report test results and defects to the development team and other stakeholders, and work on their resolution.

8. Provide suggestions and feedback to improve the quality of the software development process across teams.

9. Stay updated with the latest testing tools, techniques, and methodologies.

10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

Required Skills and Qualifications:

1. Degree or diploma in computer science, engineering, or similar technical certifications.

2. At least 1-3 years of experience in testing, quality assurance, or similar roles in the banking industry is non nego

3. Excellent problem-solving skills, an analytical mindset, and strong communication skills.

Preferred Skills and Qualifications:

1. Proficiency in testing tools such as JIRA, Selenium, Appium, and other testing frameworks.

2. Certifications such as ISTQB (International Software Testing Qualifications Board) and CSTE (Certified Software Tester).

Internal ref: 9278

Regards,

Lini

Recruitment Consultant

R22108463

Responsibilities:
1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.
2. Able to leveraging on inhouse GenAI for test case creation and enrichment
3. Ensure test runs and results are completed within the given time frame.
4. Develop and execute test plans to validate software functionality against requirements and specifications.
5. Identify, report, and track software defects and issues.
6. Perform functional, performance, security, and regression testing of software products.
7. Report test results and defects to the development team and other stakeholders, and work on their resolution.
8. Provide suggestions and feedback to improve the quality of the software development process across teams.
9. Stay updated with the latest testing tools, techniques, and methodologies.
10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

12 months renewable contract through Encora

Design, implement, and manage storage systems for organizations. They ensure data is stored efficiently, securely, and reliably.

Key Responsibilities

1. Design and implementation: Plan and deploy storage systems, including SAN, NAS, and object storage.

2. Storage management: Monitor, maintain, and optimize storage systems for performance, capacity, and availability.

3. Data protection: Implement data backup, replication, and disaster recovery solutions.

4. Troubleshooting: Identify and resolve storage-related issues.

5. Capacity planning: Forecast storage needs and plan for upgrades and expansions.

Nice-to-Have Skills

1. Certifications: Storage-related certifications, such as EMC, NetApp, or VMware.

2. Cloud certifications: Cloud computing certifications, such as AWS, Azure, or Google Cloud.

3. Virtualization: Knowledge of virtualization technologies, such as VMware or Hyper-V.

4. Networking: Understanding of networking fundamentals, including TCP/IP, DNS, and DHCP.

Education and Experience

1. Bachelor's degree: In Computer Science, Information Technology, or a related field.

2. Experience: 2-5 years of experience in storage engineering, system administration, or a related field.

Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventative maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Record information for unfinished calls prior to shift change.

Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Ensure adherence to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.

Marriott International is an equal opportunity employer. We believe in hiring a diverse workforce and sustaining an inclusive, people-first culture. We are committed to non-discrimination on any protected basis, such as disability and veteran status, or any other basis covered under applicable law.

RESPONSIBILITIES:

· Site works, inspection, planning, technical support to Project Manager and other site activities.

· Able to coordinate well with Sub-contractors, suppliers and consultants.

· Responsible for all inspection activities being carried out.

· Supervising team and ensuring safety and compliance of work on site.

· Liaise with authorities on technical matters.

REQUIREMENTS:

· Educational qualification in Structural, Civil Engineering or its equivalent.

· At least 3 years working experience in condominium projects

· Good organizational and communication skills

Element has an opportunity for Lab Engineer for Singapore. In this role, you will be involved in project plan, coordination, operation for soil investigation works. Attend the project meeting if required. Day-to-day site operation to ensure works are constructed as per project & safety requirement. Identify the soil/rock & record the field log. Take the soil sample for lab test. Supervise site works. Liaise with clients on site works / projects. Plan and arrange the Logistics

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Schedule the testing programmes according to priority
• Execute the soil testing works to determine the physical and mechanical of the soil samples: Supervise the technicians to prepare the correct samples for soil testing (e.g., check the assignment and UD soil samples)
• Carry out extrusion of the soil samples
• Liaise with clients for samples that are unable to meet their requirements for their decision-making
• Carry out the soil tests according to BS standards or standards specified by clien and submit the approved soil testing reports to clients

Job Requirements:

• Degree in civil engineering or geology, certificate in Site Investigation for Supervisors (BCA) is an advantage with 2 years’ relevant experience in major infrastructure projects
• SEC(K) Higher skill will be an advantage
• Physically fit and able to withstand the challenging working conditions
• Strong and determined quality focus with indefatigable determination to get the job done under the most challenging conditions and meet tight deadlines with minimum supervision
• Self-motivated team player with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

1.Attend vessel performs inspections,calibration, testing and troubleshooting on electrical & automation systems

2. Service/overhauling automation/electrical equipments in workshop

3.Good communication with shipcrew and superintendent

4.Good communication with shipyard

5.Prepare reports after finished the service job

A. Main Responsibilities

1 Responsible for all on-site technical and engineering matters.

2 Ensure works carried out meet company’s quality standards & contractual requirements.

3 Involved in project planning, monitoring project progress and schedule.

Including prepare work plan, schedule, preparation all the related work procedure/method statement, job safety analysis, technical clarification.

4 To co-ordinate with the client, consultant, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

Include attending all progress meeting.

5 Assisting Project Manager in monthly progress claims and monthly progress reports.

6 Ensuring supervisors, foremen, workers and sub-con meets client & regulatory work requirements. 7 Ensuring Environmental, Safety and Health practices are carried out at all times.

8 Other ad-hoc duties assigned from time to time

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1.Knowledge of Electrical & Mechanical

2.Few years of hands on experience on repair and servicing of machineries.

3. To assist for new machine installation, maintenance, troubleshoot and repair.

4.Able to work and communicate well with customers and colleagues.

5.Good working attitude

6. Travelling required and able to travel within short notice

• To assist and support the project team in preparing technical drawings and as-built reports
• To create and produce artwork, perspective and technical drawing detail that are accurate
• To assist with documentation of as-built reports and construction detail drawings

Requirements:

• Minimum ITE/Diploma holder
• Preferably with 2-3 years’ experience in design discipline academic background, fresh graduates are welcome to apply
• Able to understand/interpret floor plans, sketches and create into technical drawings
• Proficient in AutoCAD, Photoshop, Freehand and Microsoft Office (Powerpoint)
• A positive working attitude with good initiative and responsibilities
• Able to work under pressure
• Able to commit 5 to 5.5days week (Alt Sat)
• Prefer Singaporean/SPR/Work permit holder

Element has an opportunity for an Senior Engineer (6-month contract) to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

Job Duties:

• Responsible for coordination, scheduling and work planning with customers and authorized examiners
• Provide technical solution and testing proposals to customers to enure their equipment are tested according to regulation and international standards
• Attend customer meetings and site visit to provide feedback and appropriate advice as well as manage and handle respective contract customers to avoid any disruption on customers operation
• Perform test result update into the system, prepare test certification, and test report for customers
• Involve in contract preparation and contract negotiation

Job Requirements:

• Lead a team of technicians for site testing and inspection on lifting equipment and pressure vessel
• Diploma or Degree in any discipline
• Experience in customer service preferred
• Experience in project managment is a plus
• Experience in lifting and testing environment is a plus

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Technical Engineer to join our rapidly expanding team. In this role, you will manage the technical implementation of the Element quality management systems within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Training Program Development: (a) Design and implement standardised training programs for laboratory staff across all required locations, covering equipment operation, test procedures, and safety protocols. (b) Develop training materials, including manuals, presentations, and hands-on demonstrations.
2. Staff Competency Assessment: (a) Assess staff competency regularly through practical evaluations, written tests, and observation of lab practices. (b) Identify skill gaps and recommend tailored training sessions to address deficiencies.
3. Standardisation Across Locations: (a) Ensure consistent training and skill levels across all laboratories by implementing standardised processes and protocols. (b) Conduct audits to verify adherence to training standards and laboratory procedures.
4. Onboarding and Certification: (a) Train and certify new employees in laboratory operations, testing standards, and quality requirements. (b) Maintain records of staff certifications and ensure timely renewals.
5. Technical Support and Guidance: (a) Act as a resource for troubleshooting technical issues during testing procedures. (b) Provide ongoing support to ensure proper equipment usage and methodology adherence.
6. Regulatory Compliance: (a) Ensure all training programs comply with relevant industry standards (e.g., ISO/IEC 17025) and regulatory requirements. (b) Stay updated on changes in industry regulations and incorporate them into training content.
7. Multi-location Coordination: (a) Schedule and conduct training sessions at multiple sites, ensuring all teams receive consistent updates and refreshers. (b) Coordinate with laboratory managers to align training priorities with operational needs.
8. Training Evaluation and Feedback: (a) Evaluate the effectiveness of training programs through feedback, performance reviews, and testing outcomes. (b) Continuously improve training content and delivery methods based on feedback and evolving laboratory practices.
9. Documentation and Reporting: (a) Maintain comprehensive records of training activities, participant progress, and competency assessments. (b) Report training outcomes and compliance metrics to management regularly.
10. Cross-functional Collaboration: (a) Work closely with the Quality team and Operations teams to ensure training aligns with organisational goals. (b) Share knowledge of best practices across sites to drive continuous improvement.
11. Promoting Safety and Quality Culture: (a) Train staff on workplace safety practices, hazard identification, and emergency response procedures. (b) Reinforce the importance of quality control and accurate testing in daily operations.
12. Equipment and Technology Training: (a) Provide training on the use, calibration, and maintenance of laboratory equipment. (b) Introduce staff to new technologies or testing methods as they are adopted.
13. Benchmarking and Continuous Improvement: (a) Monitor industry trends and benchmarks to incorporate innovative practices into training programs. (b) Encourage staff participation in external workshops, certifications, and seminars to enhance their expertise.
14. Performance Metrics Development: (a) Define key performance indicators (KPIs) to measure the impact of training programs on laboratory efficiency, accuracy, and compliance.

Job Requirements:

• Preferred Civil Engineering Diploma or Bachelor of Civil Engineering Bachelor’s degree (or equivalent qualification) with ideally 5 years’ experience in construction materials testing.
• Experience of working in an ISO / IEC 17025 environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Excellent communication skills.
• Experience in participating in quality investigations, undertaking root cause analysis, developing corrective action plans, and ensuring the effectiveness of actions undertaken
• Requirement to keep up to date with changes in the quality landscape and maintain personal professional development.
• Ability to identify quality and technical problems and work with colleagues to determine effective and sustainable solutions.
• Ability to collaborate with colleagues and work effectively as part of a team

Job Description:

• Responsible for migrating from as-is on-perm data warehouse to Databricks and sound knowledge of Databricks.
• Requires good understanding of data architecture, cloud solutions, building and maintaining a robust, integrated, and governed data infrastructure.
• The role involves extracting valuable insights from data while
  ensuring data security, compliance, and high-quality data management.

Roles And Responsibilities:

• Lead end to end data migration project from on-premises environments to Databricks with minimal downtime.
• Work with architects and lead solution design to meet functional and non-functional requirements.
• Hands on experience in Databricks to design and implement the solution on AWS.
• Hands on experience in configuring Databricks clusters, writing Pyspark codes, build CI/CD pipelines for the
deployments.
• Highly experienced in optimization techniques (Zordering, Auto Compaction, vacuuming)
• Process near real time data through Auto Loader, DLT pipelines
• Must have strong background in python and able to identify, communicate and mitigate risks and issues.
• Identify and resolve data-related issues and provide support to ensure data availability and integrity.
• Optimize AWS, Databricks resource usage to control costs while meeting performance and scalability
requirements.
• Stay up to date with AWS, Databricks services, and data engineering best practices to recommend and
implement new technologies and techniques.
• Proactively implement engineering methodologies, standards, and leading practices.

Requirements:

• Bachelor’s or master’s degree in computer science, data engineering, or a related field.
• Minimum 5 years of experience in data engineering, with expertise in AWS or Azure services, Databricks, and/or
Informatica IDMC.
• Proficiency in programming languages such as Python, Java, or Scala for building data pipelines.
• Evaluate potential technical solutions and make recommendations to resolve data issues especially on
performance assessment for complex data transformations and long running data processes.
• Strong knowledge of SQL and NoSQL databases.
• Familiarity with data modelling and schema design.
• Excellent problem-solving and analytical skills.
• Strong communication and collaboration skills.
• Databricks certifications, and Informatica certifications are a plus.
Preferred Skills:
• Experience with big data technologies like Apache Spark and Hadoop on Databricks.
• Experience in AWS Services focusing on data and architecting.
• Knowledge of containerization and orchestration tools like Docker and Kubernetes.
• Familiarity with data visualization tools like Tableau or Power BI.
• Understanding of DevOps principles for managing and deploying data pipelines.
• Experience with version control systems (e.g., Git) and CI/CD pipelines.
• Knowledge of data governance and data cataloguing tools, especially Informatica IDMC.

Leading global financial institution dedicated to driving innovation and excellence. Their technology team is seeking an experienced Platform Engineer to design, build, and maintain their next-generation platforms.

Job Summary:

As a Platform Engineer, you will lead the design, implementation, and maintenance of our platform infrastructure, including CI/CD pipelines, containerization, and cloud-based technologies. You will collaborate with cross-functional teams to ensure seamless integration and operation of our platforms.

Key Responsibilities:

• Design, implement, and maintain platform infrastructure, including CI/CD pipelines, containerization, and cloud-based technologies
• Lead the setup of CI/CD pipelines using Docker, Kubernetes, and other tools
• Collaborate with different teams to understand environment build requirements
• Troubleshoot and debug environment-related issues
• Document scripts and automation processes for future reference and maintenance

Requirements:

• 6-8 years of experience in platform engineering or a related field
• Strong domain knowledge of platform infrastructure, including CI/CD pipelines, containerization, and cloud-based technologies
• Proficiency in Linux and cloud platforms (Kubernetes)
• Experience with scripting languages (Python, Bash, PowerShell, Perl, JavaScript)
• Experience with version control systems (Git)
• Strong executive communication and stakeholder relationship management skills

Preferred Qualifications:

• Experience with monitoring and logging tools (Splunk)
• Experience with Dynatrace integrations
• Knowledge of Rabbit MQ and Redis
• Familiarity with Java and simple UI development

We regret to inform that only shortlisted candidates will be notified / contacted.

EA Registration No: R21103843, Andrew Jonas Matthew

Allegis Group Singapore Pte Ltd, Company Reg No. 200909448N, EA License No. 10C4544

We’re seeking a skilled and driven Automation Engineer to design, develop, implement, and maintain automation solutions that streamline processes, boost efficiency, and enhance product quality.

Key Responsibilities

• Design, maintain, and enhance automation frameworks for software, hardware testing, and process optimization.
• Collaborate with teams to gather requirements and deliver tailored automation solutions.
• Develop efficient scripts, test cases, and reusable documentation for automation tasks.
• Identify and implement opportunities to enhance operational efficiency.
• Troubleshoot and upgrade existing automation systems to ensure optimal performance.
• Stay informed on emerging technologies and integrate innovative practices.
• Provide training and technical support on automation tools and processes.
• Document workflows, test cases, and results for auditing and reference.
• Coordinate project timelines and stakeholder meetings for seamless delivery.

Qualifications:

• Experience:4–7 years in automation engineering, with a focus on robotics and process automation.
• Technical Skills:Proficiency in Linux, VBA, and other relevant programming languages.
• Development Practices:Knowledge of CI/CD pipelines and tools.
• Problem-Solving:Strong analytical skills with keen attention to detail.
• Communication:Excellent verbal and written communication, with the ability to work collaboratively in cross-functional teams.
• Certifications:Certification in automation or related fields is advantageous.
• Industry Background:Experience in logistics or manufacturing is a plus.

We regret to inform that only shortlisted candidates will be notified / contacted.

EA Registration No.: R1658484, Amita Raj

Allegis Group Singapore Pte Ltd, Company Reg No. 200909448N, EA License No. 10C4544