As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a research project, funded by Singapore Ministry of Education (MOE), where you will be part of the research team to develop a scalable and comprehensive framework for formal verification of quantum programs. The framework consists of the following deliverables:
• Intermediate Language. We plan to develop an intermediate language to model quantum programs. The intermediate language would be complete to describe all the desired characteristics of quantum computing while at the same time simple enough to be understood by most programmers.
• Formal Verification Framework. We plan to develop a comprehensive framework to verify the correctness of quantum programs written in the proposed intermediate language.
• Mechanization. We plan to mechanize the formal framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
• Proof Automation. We plan to develop formal methods for automatic reasoning that can be materialized into commercial tools.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI) and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. develop an intermediate language to write quantum programs.
  2. develop a comprehensive framework to verify the correctness of quantum programs written in our intermediate language.
  3. mechanize the verification framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
  4. develop formal methods for automatic reasoning that can be materialized into commercial tools.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of formal methods (including theorem proving and model checking, especially theorem proving), quantum computing, and software analysis/verification.
• Have a degree in computer science, computer engineering, or related areas. Possessing a Master’s or PhD degree will be advantageous
• Knowledge of separation logic and quantum program analysis/verification will be advantageous.

Key Competencies:

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges:

As quantum computers are operated in extreme physical conditions and thus the cost per run is significantly high, it is desirable to verify the correctness of a quantum programs before the execution. However, the verification task of quantum programs is challenging due to the following reasons:

• Quantum programs (even written at high-level languages) are complicated to comprehend as it requires a good understanding of quantum mechanics and the relevant advanced mathematics.
• The quantum states are exponentially huge in size because the state of a classical bit is either 0 or 1 at any time, while the state of a quantum bit (qubit) can be in the superposition, where both states 0 and 1 can co-exist simultaneously. This induces the state explosion problem for brute-force-like methods.
• Quantum states are naturally probabilistic thus may yield different results on different runs, which is challenging for the testing and debugging methods.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a flexible array ultrasound imaging system for velocity estimation.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Collaborator and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  i. To develop simulation models for flexible array ultrasound system
  ii. To develop custom phantoms for experimental studies
  iii. To design and develop non-linear signal processing algorithms including deep learning algorithms for image reconstruction
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of digital electronics, signal processing, machine learning and deep learning.
• Have a B-Engg or B. Tech degree in Electronics, Computer or Biomedical Engineering with undergraduate projects related to the relevant competence mentioned.
• Knowledge of biomedical signal processing will be advantageous.
• Should have proficiency in Matlab or Python.
• Prior experience in publishing is desirable.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges

• Integration of flexible arrays with research ultrasound platform
• Design and development of deep learning-based flexible array adaptive image reconstruction pipeline

Want to be part of a fun and exciting team in one of the fastest growing IT companies in Singapore? Xtremax is an established IT company that provides IT services such as website development and design to government agencies and private companies to help them transform their digital experience. We are expanding and actively looking for an experienced and highly motivated individual for the Technical Support role.

Responsibilities:

• Provide customer support by answering phone and email enquiries
• Primary investigation, information gathering before escalating to internal team for further diagnosis
• Manage operational issues/risks in a timely manner; escalating when necessary
• Keep track of service requests to meet service KPIs
• Follow standard operating procedures, and respond professionally
• Communicate effectively between customers and development team on escalated issues
• Understanding of issues raised by customer
• Good sense of ownership to customers’ reported issues and track them through resolution and bring to closure of ticket raised
• Serve as a key point of contact based on agencies assigned
• Cross functional collaboration: You are required to work with different teams within our organisation to meet the needs of our business.
• Escalate critical issues / roadblocks to the Technical Support Team Lead

Requirements

• Minimum polytechnic diploma in IT, computer engineering, or relevant experience
• Preferably have knowledge in cloud services (eg. Microsoft 365, Amazon Web Services, Microsoft Azure, Google Cloud)
• Preferably have knowledge in ticketing system (JIRA)
• Good interpersonal and communication skills
• Strong analytical and problem solving/troubleshooting skills
• Strong interest in technology
• Ability to communicate highly technical information to both technical and non-technical customer audience
• Ability to work independently and as a team in a dynamic environment

By submitting your resume/CV, you consent and agree to allow the information provided to be used and processed by or on behalf of Xtremax Pte Ltd for purposes related to your registration of interest in current or future employment with us and for the processing of your application for employment.

You also represent to us that you have obtained the consent of your referees when you disclose to us their personal data for the purpose of conducting reference checks.

The personal data held by us relating to your application will be kept strictly confidential and in accordance with the PDPA. You may also refer to our Privacy Policy for more details here: https://www.xtremax.com/privacy-policy

We regret to inform you that should you not consent to providing the necessary data required for us to process your application, your application will be considered void.

Apply for this job

As a global leader in power and thermal management solutions, Delta Electronics was founded in 1971 and is headquartered in Taipei, Taiwan with annual revenue exceeding $13 billion. Our wide range of products and solutions cover power supplies, energy management systems, display solutions, and industrial automation products.

We are known for our focus on innovation, sustainability, and energy efficiency. Active investment in research & development, and implementation of cutting-edge technologies ensures our business drives positive environmental impact.

Looking forward to having you join our 85,000 colleagues in building a Smarter and Greener future, Together!

Position Overview:

As a Datacenter Infrastructure Field Application Engineer or Presales Engineer, you will be responsible for supporting and driving the sales of solutions within the datacenter infrastructure field. In this role, you will work closely with customers, sales teams, and other technical personnel to ensure the successful deployment and integration of CDU/Cooling systems in datacenter environments.

Key Responsibilities:

• Expertise in CDU/Cooling Solutions: Possess in-depth knowledge of Data Center products, solutions, and services, keeping up-to-date with industry trends and technological advancements related to datacenter infrastructure.
• Sales Support: Collaborate with the sales team to participate in customer meetings and presentations, understanding customer needs, and proposing appropriate solutions.
• Technical Consultation: Engage in technical discussions with customers to understand their datacenter infrastructure requirements and propose tailored solutions.
• Solution Design and Proposal: Create detailed technical proposals and designs that address customer requirements, including system configurations, power distribution, backup options, and monitoring capabilities.
• Project Management: Collaborate with project managers, engineers, and installation teams to ensure the successful implementation and commissioning of systems in datacenter environments. Provide technical guidance and coordinate tasks throughout the project lifecycle.
• Demonstration and Training: Conduct technical demonstrations and training sessions for customers and sales teams to showcase the capabilities and benefits of solutions.
• Customer Relationship Management: Build and maintain strong relationships with customers, addressing their technical queries, providing post-sales support, and proactively identifying opportunities for additional solutions and services.
• Industry Expertise: Stay updated with the latest industry standards, regulations, and best practices related to datacenter infrastructure, power distribution, and systems.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Computer Science, or a related technical field is preferred.
• Experience: Prior experience as a Field Application Engineer, Presales Engineer, or a similar role within the datacenter infrastructure industry, with a focus on CDU/Cooling solutions and power management. Experience in supporting sales teams and customers is highly desirable.
• Communication Skills: Excellent verbal and written communication skills to effectively convey technical concepts and solutions to customers and internal stakeholders. Ability to deliver compelling presentations and demonstrations.
• Problem-solving Skills: Strong analytical and problem-solving abilities to identify customer requirements, propose effective solutions, and troubleshoot technical issues.
• Project Management: Familiarity with project management methodologies and tools to manage multiple projects simultaneously, ensuring timely delivery and customer satisfaction.
• Customer Focus: Demonstrated ability to understand customer needs and offer suitable solutions. Strong customer service orientation and ability to foster long-term customer relationships.

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

Basic salary: ($3200 - $4500)

Location: Serangoon

Working hours: Mon - Fri, 8.30am to 6pm

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to speak both English and Mandarin to liaise with Chinese speaking clients

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Descriptions:

• Overseeing and directing construction projects from conception to completion
• In-depth reviewing of projects to schedule deliverables and cost estimation
• Ensure safety procedures are implemented and meet company’s standard and legislation
• Ensure safety and health are in place according to building and safety regulations
• Monitor, control, and coordinate site works
• Ensure projects meet customer’s quality standards
• Any d-hoc duties as require

Requirements:

• Degree in Civil Engineering or equivalent with at least 5 years relevant experiences at or equivalent managerial level in construction
• Knowledge in Design and Auto Cad (3D) for Civil Structure work.
• Good communication skills
• Able to communicate in English and Japanese language (to handle queries and feedback from Japanese speaking associates/ clients)

Responsibilities:

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in electronics product manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

Key Responsibilities:

• Project Planning and Scheduling: Develop comprehensive project plans and schedules that incorporate all project activities, milestones, and deliverables. Utilize project management software to ensure accurate tracking and reporting.
• Risk Management: Identify potential project risks and develop mitigation strategies to minimize impact on project timelines and budgets.
• Resource Allocation: Efficiently allocate resources, including manpower, materials, and equipment, ensuring that projects are completed within budgetary constraints.
• Stakeholder Communication: providing regular updates on project progress, potential challenges, and changes to project plans.
• Quality Control: Ensure that project planning and execution adhere to industry standards, company policies, and client specifications, maintaining high quality and safety standards.
• Continuous Improvement: Analyze project outcomes and processes for lessons learned and opportunities for improvement in future planning and execution phases.
• Team Leadership: Lead and mentor junior planning engineers and other project staff, fostering a collaborative team environment.

Required Qualifications:

• Bachelor’s degree in Engineering, Construction Management, or a related field.
• A minimum of 5 years of experience in project planning and management within the construction or engineering industry.
• Proficiency in project management software (e.g., Primavera P6, MS Project, powerpoint).
• Strong understanding of engineering principles, construction methodologies, and project management best practices.
• Excellent analytical, organizational, and problem-solving skills.
• Desired Skills and Attributes:
• Strong leadership and team management skills.
• Exceptional communication and interpersonal skills.
• Ability to work under pressure and manage multiple projects simultaneously.
• Strategic thinker with a proactive approach to project planning and risk management.
• Commitment to continuous learning and professional development.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are a looking for a Application Engineer (BMS/EPMS) to make an impact!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Leading the Deployment of Application for Building Management System / Electrical Power Management System
• Lead technical discussion and clarification with the customer acting as key contact person for all technical related topics. Under Project Manager leadership monitor engineering deliverables and progress through continuous communication with team members and perform regular technical status reports.
• Take active part in meetings with the customer. Prepare and conduct Factory Acceptance Tests (FAT) with the customer.
• Perform and get customer approval on basic and detailed design of integrated solutions in line with the contract (technical, time & performance requirements) and leveraging Schneider Electric portfolio of products and systems, maximize project profitability and manage technical risk.
• Ability to work independently while also collaborating with global teams and complying to global standards.
• Produce engineering outputs such as System architecture, sub-systems interfacing points, detailed point schedules, control panel drawings, equipment and control valve schedules, description of operations, database generation, graphics development, system hardware and software configuration and programming, etc. Proposal of HVAC and EMS controls strategies in various application.
• Master all technical aspects of the Project: design, integration, testing, FAT, installation, commissioning, warranty. Validate technical choices compliance with the design (based on Technical Design Process).
• Manage stakeholders involved in the execution.

What qualifications will make you successful for this role?

• Degree in Engineering or its equivalent discipline
• 5 years leading technical projects or as Solution Application Engineer
• 5 years in his technical field of expertise (PLC/ DDC, SCADA Systems)
• Knowledge of data center and/or other mission critical facilities design, operation and maintenance.
• Proven ability to lead with agility functional and remote technical team having different fields of expertise
• Proficiency in Programmable Logic Controller, SCADA and DDC Controllers (preferably in Schneider brand) development and implementation for redundant system architectures on HVAC applications including chiller systems
• Knowledge of HVAC applications including Chiller Systems, Air Handling Units, Fan Coil units, Computer Room Air Handlers, Mechanical ventilation units, Sanitary and Plumbing, Fire Alarm, Low voltage and Medium/High Voltage Electrical systems and other miscellaneous systems.

What’s in it for me?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership

…and more!

Let us learn about you! Apply today.

Job Description:

• Preparation of project documentation e.g. tender, quotation, progress claims, drawings, checklist, etc
• Responsible for site coordination and supervising to ensure projects are completed according to schedule.
• Liaise closely with clients, consultants, and suppliers on all project-related matters.
• Attend site walks, meetings, and site inspections when required.
• To carry out technical support functions in mechanical engineering work on site.
• To ensure effective project management on design, installation, testing, commissioning, servicing, and maintenance activities.
• Attend meetings, and prepare project schedules and progress reports.
• To ensure smooth and timely delivery of the project.
• Any other duties as assigned by superior.
  

Job Requirements:

• At least a Diploma in Mechanical Engineering or its equivalent.
• Minimum 3 years of relevant working experience in M&E or the construction industry.
• Possessing relevant safety certificates is an advantage.
• Knowledge of equipment installation, testing & commissioning, and troubleshooting as per M&E drawings or engineering specifications.
• Ability to work independently and under pressure to meet tight project schedules.
• Willing to travel & based at the project site.
• Have knowledge of AutoCAD & Microsoft Office.
• Candidates without experience but with relevant qualifications will be considered as well.
  

Unified Communications (UC) Engineer/Analyst

Job Description:

• Primary handling voice incidents escalations
• Configuring and troubleshooting of CUCM, CME, Cisco Unity Connection, Cisco Unified CCX, Cisco IP Phones, Cisco IP Communicator, Cisco Jabber, Cisco Voice Gateways (SIP, H323, MGCP)
• Configuring Cisco IP Phones, Expansion Modules, Extension Mobility Profiles, Voicemail, Cisco Jabber, Cisco IP Communicator.
• Upgrading IP Phone firmware in CUCM and CME to fix vulnerabilities.
• Monitoring alerts, collecting traces and debugs for voice incidents involving call flow issues.
• Remediating all endpoints, gateways and servers and making sure all are 100% compliant.
• Engaging Cisco TAC and working along with them to resolve complex incidents.

Job Requirements:

• Degree / Diploma in computer or Electronics Engineering
• CCNP Cisco Collaboration certification
• Minimum of 14+ years of related IP telephony / Unified Collaboration /Telepresence implementation or Administration experience including some of the following:

-Knowledge with TELISCA Call Recording troubleshooting

-Setup & maintenance of Cisco Collaboration and meeting products such as CUCM, CUC, IMP, CMS, TMS.

-Capable to install, integrate, maintain, modify, improve, enhance and upgrade the hardware and software of the Cisco Collaboration products

-Experience in administration of Cisco UC servers in Cisco UCS platform

-Experience in setup & troubleshooting of H323, SIP Trunks, SCCP, MGCP Voice Gateways, etc

-Experience in Cisco IP Phones

-Experience in integration with AD, DNS, LDAP etc…

-Experience in Single Sign-On (SSO) setup and troubleshooting.

-Knowledge in Routing, Switching and Security

-Knowledge in Server, Local and Group Policy, User management, Services, etc

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• Participate in research and analysis to identify project requirements, conceptualizing plans, designing, and developing systems, establishing guidelines and goals, and creating strategy to optimize operational activities for new product introduction.
• Work with Engineering, Quality, Commodity and NPI to ensure success in new product development and launch.
• Manage and coordinate in earlier supplier involvement in new product introduction from part design phase through mass production, ensure critical timeline and target COSS are met.
• Ensures that Cost, Quality and Availability are achieved for product development phase and through their full life cycle.
• Manage supplier onboarding process and selection with integrity, alignment across value-chain and value engineering.
• Manage cost activities.
• Responsible in ensuring best-in-class cost, thru negotiation and/or tear down activities.
• Identifies cost drivers to influence design decision making towards target costing.
• Ensure product/module cost models and quotes are up to date at launch and effectively rolled out.
• Reviews and negotiates supplier terms and conditions exceptions to mitigate risk.
• Supports price negotiations with opportunities to drive short- and long-term cost reduction improvement.
• Builds strong, value-added relationships with suppliers, internal customers, and cross functional departments.
• Collaborates with Supplier Quality in the new supplier/component release process, including compliance and sustainability aspects.
• Partners Category team, ensuring BU product requirement and supplier technology alignment are included in building Commodity Strategy. Supporting and executing category strategy.
• Analyze lead times, identify critical paths, and prioritize demand requirements.
• Participates in project meetings/brainstorming sessions to identify solutions available.
• Performs other duties as assigned.

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

We are seeking a motivated and proactive Electrical & Electronics Engineering/ Electronics & Computer Engineering Intern to join our dynamic engineering team in Singapore. The intern will gain valuable hands-on experience in the design, development, testing, and troubleshooting of electrical and electronic systems. You will be working closely with experienced engineers and contribute to the ongoing development of projects that involve circuit design, hardware testing, and product development.

Role and Responsibiltities :

Circuit Design & Analysis: Assist in designing electrical and electronic circuits, including power supplies, analog and digital circuits.

Testing & Validation: Participate in testing prototypes, conducting experiments, and validating design specifications against real-world performance.

Hardware Prototyping: Help build and assemble prototype systems for various projects, ensuring accuracy and compliance with engineering standards.

Troubleshooting & Problem-Solving: Support the identification and resolution of issues in electrical/electronic systems, including testing components and sub-systems.

Documentation & Reporting: Assist in preparing technical documentation, test reports, and design specifications to support ongoing projects and future development efforts.

Collaboration: Work alongside with software developers/ engineer, and project managers, to develop integrated solutions.

Research & Development: Contribute to ongoing research in the field of electrical/electronics engineering, staying updated on emerging technologies and industry trends.

Ad-hoc Projects: Assist with various other engineering-related tasks, such as simulation work, software tools development, and equipment calibration.

Requirements:

Educational Background:

Currently pursuing a Diploma or a Bachelor’s degree in Electrical and Electronics Engineering, Electronics and Computer Engineering, or a related field.

Technical Skills:

Knowledge of circuit design and analysis.

Familiarity with Microsoft office e.g. Word, Excel, Powerpoint.

Basic understanding of microcontrollers (e.g., Arduino, Raspberry Pi).

Hands-on experience with oscilloscopes, multimeters, power supplies, and other lab equipment.

Understanding of embedded systems, PCB design, or power electronics.

Knowledge of industry standards and regulatory requirements for electrical systems.

Experience with CAD tools (e.g., AutoCAD ) for circuit board design is a plus.

Programming Skills:

Familiarity with programming languages (e.g., C ++, Python ).

Basic knowledge of embedded systems development is a plus.

Problem-Solving: Strong analytical and problem-solving abilities with attention to detail.

Communication Skills:

Good written and verbal communication skills to effectively collaborate within a team.

Team Player:

Ability to work in a team-oriented environment while also demonstrating initiative and independence.

Benefits:

Exposure to real-world engineering projects.

Mentorship and guidance from experienced professionals in the field.

Opportunity to develop skills in both hardware and software aspects of electrical/electronic systems.

Responsibilities:

1. Responsible for packaging solutions and design, defining performance criteria for signal integrity (SI), power integrity (PI), and thermal performance.

2. Optimize power performance in packaging design, focusing on PI and SI parameters.

3. Manage collaboration and technical communication with packaging and testing vendors.

Requirements:

1. Bachelor’s degree or higher in Electronic Engineering, Microelectronics, Computer Science,

or a related field.

2. Minimum of 5 years of experience in packaging design and development, or experience in

project development at a design company.

3. Strong communication and coordination skills, teamwork spirit, and resilience under

pressure.

4. Proficiency in both written and spoken English and Chinese is a plus.

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 2 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Create technical documents
• Maintain multiple versions, variants
• Documents include IC Specifications, Application notes, user manuals
• Diploma/Degree in Computer/Electrical/Electronic Engineering
• Must have good command on written English
• Drawing skills to create block diagrams, waveform
• 1-2 years of experience in technical Documentation will be an advantage

Job Scope:

• Collaborating with project managers to understand project requirements, specifications, and expectations
• Participating in project planning and scheduling activities
• Inspecting construction sites regularly to monitor progress and ensure compliance with design specifications
• Implementing and maintaining quality control procedures to ensure the project meets industry standards and regulations
• Conducting tests on construction materials to ensure they meet required standards
• Collaborating with architects, engineers, and other professionals to coordinate activities and resolve design issues
• Provide technical solutions to problems encountered during the construction process
• Efficiently managing resources, including labour, materials, and equipment
• Implementing and enforcing safety protocols to ensure a safe working environment
• Conducting regular safety inspections and addressing any issues promptly
• Maintaining accurate and up-to-date project documentation, including daily reports, progress reports, and as-built drawings
• Keeping records of materials used, labor hours, and equipment usage
• Identifying and resolving construction-related issues and challenges as they arise
• Providing regular updates to project stakeholders on progress, challenges, and milestones
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Master’s degree in engineering or a related field
• At least having 2 years relevant experience in engineering or site engineering in construction industry
• Strong knowledge of construction methods, materials, and processes.
• Familiarity with relevant construction codes, regulations, and safety standards.
• Proficiency in using construction management software and tools.
• Excellent communication and interpersonal skills.
• Problem-solving skills to address unexpected challenges.
• Attention to detail and a commitment to quality.
• Able to multi-task and work under tight schedules
• Strong negotiation and problem-solving skills
• Able to face challenging tasks and meet high standards and deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 working days

We are regret that only shortlisted candidates will be notified.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Description:

1. Project Management:

• Lead and manage technical projects from inception to completion.

• Create project plans, timelines, and allocate resources.

• Ensure project milestones are achieved on time and within budget.

• Conduct regular project reviews and report on project progress to stakeholders.

2. Team Leadership:

• Supervise, mentor, and guide a team of engineers, developers, or IT professionals.

• Set goals, conduct performance evaluations, and provide feedback to team members.

• Foster a positive work environment and encourage continuous learning and development within the team.

3. Technical Strategy & Execution:

• Define and implement the technical strategy that aligns with the company’s goals.

• Make key technical decisions, such as technology stack selection, system architecture, and processes.

• Stay updated with the latest technological advancements and assess their impact on current operations.

4. Collaboration & Communication:

• Work closely with cross-functional teams (e.g., Product, Sales, Marketing, and Operations) to ensure alignment on business goals.

• Communicate technical concepts and strategies clearly to both technical and non-technical stakeholders.

• Ensure that customer needs are understood and translated into technical solutions.

5. Quality Assurance:

• Establish and maintain high standards for software quality and technical performance.

• Implement and monitor key performance indicators (KPIs) to measure project success.

• Ensure adherence to security protocols, data privacy, and compliance standards.

6. Vendor and Resource Management:

• Manage relationships with external vendors, contractors, and consultants.

• Oversee procurement of software, hardware, and other technical resources.

• Ensure cost-effective and efficient utilization of technology resources.

7. Problem Solving & Risk Management:

• Identify technical challenges and propose solutions to overcome them.

• Manage risks and develop contingency plans to ensure smooth project execution.

Job Requirements:

1. Education:

• Bachelor’s degree in Computer Science, Information Technology, Engineering, or a related field.

• Master’s degree

2. Experience:

• 10+ years of experience in a technical role (e.g., software engineer, systems architect).

• 5+ years of experience in a management or leadership position.

• Proven experience in managing technical teams and complex projects.

3. Technical Skills:

• Deep knowledge of relevant technologies, such as programming languages (e.g., Python, Java), frameworks, cloud services (AWS, Azure), and databases.

• Strong understanding of system architecture, software development lifecycle (SDLC), and agile methodologies.

• Familiarity with DevOps practices and tools (CI/CD pipelines, version control).

4. Leadership & Management Skills:

• Strong leadership abilities with a proven ability to inspire and motivate a team.

• Excellent problem-solving skills and the ability to make sound decisions under pressure.

• Ability to manage multiple priorities and navigate tight deadlines.

5. Soft Skills:

• Exceptional communication and interpersonal skills.

• Strong organizational skills and attention to detail.

• Ability to collaborate effectively with both technical and non-technical stakeholders.

6. Certifications (Optional but Preferred):

• Project Management Professional (PMP) certification.

• Agile or Scrum certifications.

• Relevant technical certifications (AWS Certified Solutions Architect, etc.).

Key Performance Indicators (KPIs):

• Project completion rate and on-time delivery.

• Team performance and retention.

• Quality of technical solutions (bug rates, system uptime).

• Stakeholder satisfaction.

technical understanding requirement .

a) understands the drawings and scope of works

b) understands the implications of different technicalchoice so as to meet the project objectives

c) involve in providing value engineering solutions basing on his knowledge .

d) to have knowledge in the preparationof engineering proect proposals and method statements .

e) carry out project objectives so align with company goals.

f) to co-ordinate program and monitor site work , materials , plant and equipment .

g) involving in client /consultant / sub-contractor meetings .

h) to carry out short term planning to meet site progress .

g) shop / as build drawing preparation .

h) Assists project manager in monthly progree report