We are seeking highly motivated Semiconductor Laser Scientist/Principal Engineers to join our team and contribute to the development of innovative chip-based laser solutions for laser-to-silicon photonics applications. The successful candidates will play a pivotal role in driving the design, development, and optimization of on-chip semiconductor lasers for Si photonics applications, collaborating with external fabs, universities, and research institutes.

Responsibilities

• Develop innovative on-chip laser solutions for advanced silicon photonics applications
• Develop and optimize on-chip laser fabrication processes, including epitaxial design, wafer processing, and packaging
• Contribute to the development of innovative laser fabrication techniques and technologies, such as heterogeneous and hybrid integration of lasers with silicon photonics platforms
• Collaborate with external fabs and research institutes to ensure efficient and cost-effective fabrication of high-quality laser devices
• Collaborate with cross-functional teams to integrate lasers into complex photonic systems
• Support the transition of laser products from research to commercialization

Qualification

• PhD or Masters Degree in Science and Engineering, Physics, Applied Physics, or a related discipline in Optics and Photonics
• Minimum 2 years of experience in semiconductor laser development or a related field
• Strong understanding of semiconductor laser physics, device design, and fabrication processes
• Experience with laser characterization and measurement techniques
• Proficiency in using simulation tools (e.g., Lumerical) for laser design and analysis
• Knowledge of packaging and integration technologies for semiconductor lasers and silicon photonics
• Experience in laser-to-silicon photonics applications
• Experience in commercial Si Photonics product design and product engineering is a plus.

Job Responsibilities:

• Technical support including full range of enterprise products, network technical solution, highlights proposal and etc.
• To handle clients’ inquiries and technical related issues.
• Collaborate with the team and others to identify, troubleshoot and find resolutions for technical problems.
• Responsible for new product test
• Promote solutions and deliver formal technical proposals / presentations to clients.
• Complete other tasks assigned by leaders and management.

Job Requirements:

• Experienced in networking product like Switch, Wireless Access Point, Router and other networking related product.
• Good knowledge in the fields of Business Network system such as Gateway, Switch, AP and IP CCTV.
• At least 2 years work experiences on Business Network domain or technical domain.
• Ability to speak in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters
• Experienced in handling and troubleshoot technical issues.
• Possess CCNA/CCNP and other networking certificate would be an added advantage.

Remuneration: Basic & VB + $800 Flexi Dollars + 3 month performance bonus

Work location: Pioneer

Working hours: Mon - Fri, 8:30am - 5:30pm

Job Description:

• Manage daily operation activities in workshop and customer service
• Ensure the performance and reliability of XSQUARE’s fleet of AGVs
• Respond and provide technical guidance to customers regarding operational issues, software updates, general maintenance etc
• Ensure accountability and integrity operational readiness of workshop
• Develop all necessary policies and procedures to ensure the workshop is effectively maintained to ensure maximum efficiency
• Ensure staff are appropriately trained and motivated to carry out their responsibility to the required standards
• Deal openly and promptly with any problems and effectively identify and manage risk as appropriate
• Constantly review and streamline workflow and working conditions in order to achieve labor turnover and efficient operation
• To ensure all works are carried out in accordance with the safety and housekeeping requirements set by the company
• Provide the point of escalation for team for any operational issues
• Act as a bridge between sales, operations & customers
• Write technical report and submit to customer/manufacturer
• Preparation of reports on performance, budget and expenditure
• Plan and achieve financial budget and key performance indicators

Job Requirements:

• At least 3 years above experience in Industrial Robotics (AGV / Forklifts etc.)
• Candidates with experience from Robotics companies: strobo, hope technik, rockwell automation, omron, swisslog, would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Knowledge of submicron semiconductor technology
• Familiar with digital ASIC/SOC design flow from RTL to silicon characterization
• Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.
• Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.
• Familiar with code base management method including subversion, git, GitHub, etc.
• Ability to apply analytical and problem-solving skills
• Strong written and verbal communication skills, ability to negotiate design features and options
• Knowledge of embedded system design, verification, and product development lifecycle
• Deep knowledge and domain know-hows in one or more areas below is a big plus.

(Only Singaporean will be considered)

Job Description:

The DevSecOps Engineer works along with the Project teams to onboard new squads in the DevOps environment. DevSecOps Engineers will guide them for continuous integration, continuous deployment and continuous testing. DevSecOps Engineer works closely with the development team and operation team to create DevOps strategy and toolset that suits the individual squads.

Responsibility:

• Work with the CI/CD engineers to build initial DevSecOps pipeline supporting squads when onboarded to the project
• Overall Support of the Pipeline (Build & Deploy) to ensure seamless deployment
• Customization of existing pipeline and template based on squad requirements
• Build and manage AWS cloud formation scripts to handle configuration management and ensure continuous deployment
• Ensure availability of infrastructure which includes troubleshooting underlying system if applicable
• Coordinate with the infrastructure team on standard updates and ensure those are reflected on a regular basis
• Facilitate induction programs to provide guidance when new squads onboard the project

Skills:

• At least 3 years hands-on experience in building and developing CI/CD pipeline and workflow (Gitlab CI/CD preferred)
• Good hands-on experience on using AWS Cloud Formation scripts for configuration management and application deployment
• At least 3 years experience with AWS platform (EC2, ELB, VPC) in general and tools such as Lambda, RDS, Dynamo DB
• At least 2 years experience in programming, and overall knowledge on one or more of the following programming language (Java, Spring Boot, Node JS, Angular JS, React Native)
• At least 1 year experience working closely with infrastructure. Experience in Linux, Windows, network troubleshooting is a plus
• Experience on working in an Agile environment, in a close collaboration with developers
• Knowledge on continuous integration, test automation, version control, and software configuration management

UEN: 201508072D

EA License: 22S1099

Personnel Registration Number: R22107983 (Zhen Shuyi)

Responsibilities:

• Assists Project Manager in project planning and to co-ordinate and oversee all work on the site.
• Study drawing, plans, specification and scope of work.
• Responsible for submission of material sample and shop drawing.
• Monitoring closely of construction work progress, materials, plant and equipment.
• Carry out site visit, attend site test and inspection and temporary work.
• Workout and maintain VO schedule.
• Verification of material requisition and taking off quantities/site measurement.
• Prepare progress claim to Main-contractor on monthly basis.
• Prepare payment certificate, verify sub-contractor work progress.
• Ensure quality standard and Safety Requirements are adhered to.
• Work closely with project team and resolve all technical issue.

Requirement:

• Diploma in Engineering / equivalent.
• Min. 3 years ACMV work experience in M&E construction industry is Preferred.
• Able to handle multiple projects simultaneously.
• IT skills in Microsoft office, Autocad.

Please include the following information in your resume:

• Education background
• Working experience
• Reason of leaving current and past employment
• Current salary
• Expected salary
• Notice period

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Job Description

The job involves the supervision of MRT projects Cross Island Line

Job Requirements

RE shall have minimum 4 years of relevant experience as a civil engineer, of which minimum 2 years in supervision of deep excavation/basement works..

- Registered as RE Cert accredited by the Institute of Engineers Singapore (IES)/Association of Consulting Engineers Singapore (ACES).

- MRT experience will be an advantage.

Responsibilities

Project Planning and Coordination:

Collaborate with the project management team to develop project plans, timelines, and budgets for HVAC projects.

Ensure compliance with project specifications, codes, and industry standards.

Coordinate and schedule project activities, subcontractors, and resources effectively.

Design Review and Analysis:

Review HVAC system design drawings and specifications to identify potential issues or improvements.

Perform engineering calculations and simulations to optimize system performance.

Provide input and technical guidance during the design phase.

Material Procurement and Vendor Management:

Assist in the procurement of HVAC materials and equipment.

Evaluate and select vendors and suppliers based on cost, quality, and reliability.

Maintain strong vendor relationships and ensure timely deliveries.

Quality Control and Inspection:

Implement quality control processes to ensure HVAC systems meet project requirements.

Conduct regular site inspections to verify workmanship and compliance.

Identify and address any deviations from project standards.

Documentation and Reporting:

Maintain accurate project documentation, including drawings, change orders, and progress reports.

Prepare and submit regular project status reports to the project management team.

Document and address any project-related issues or disputes.

Safety and Compliance:

Ensure that all HVAC installations comply with safety regulations and industry standards.

Promote a culture of safety among project team members and subcontractors.

Conduct safety audits and address any safety concerns promptly.

Client Communication:

Act as a primary point of contact for clients regarding HVAC project updates and inquiries.

Address client concerns and seek opportunities for additional services.

Budget and Cost Control:

Monitor project budgets and expenditures to ensure they align with project plans.

Identify cost-saving opportunities and implement cost control measures.

Qualifications

• Bachelor's degree in Mechanical Engineering or related field.
• 1-2 years of experience in HVAC engineering and project management.
• Strong knowledge of HVAC systems, design principles, and industry best practices.
• Proficiency in AutoCAD, HVAC design software, and project management tools.
• Excellent communication, leadership, and teamwork skills.

5.5 days /week

Mon - Fri : 0830 to 1730 hrs

Sat : 0830 to 1230 hrs

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

As a standard cell design engineer in the Physical Design Group, you will develop your skills working on some of the most sophisticated process nodes targeting the largest foundries. You will contribute to designing our physical IP standard cell offerings for our internal and external customers at leading edge nodes including 5nm and beyond. Work with partners inside the company, as well as our partners in the EDA and foundry space.

Responsibilities:

· Design standard cell circuits and verify them for functionality, performance, and power

· Generate and validate EDA model views of standard cells

Required Skills and Experience :

· 5+ years of relevant circuit design experience (for BSEE)

· 3+ years of relevant circuit design experience (for MSEE)

· Experience with transistor level circuit design using Cadence Virtuoso and circuit simulators such as SPICE, SPECTRE

· An understanding of transistor level device physics and standard cell layout

· Knowledge of power, performance, and area tradeoffs

· An ability to learn a wide variety of industry standard view and modeling formats such as Liberty, Verilog, LEF, NDM, APL, GDS

· Scripting skills in either Tcl, PERL or Python

· Dedication to quality, collaboration, curiosity and continual improvement

Job description

• Experience in UVM verification methodology
• Experience in developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

Remuneration: Basic with AWS & VB

+ $120 Transport Allowance + $66 (Flexible Benefit Allowance) + eMedical Card (cover spouse + children under 18)

Work location: MacPherson

Working hours: Monday to Friday

Job Description:

• Coordinate with Maintenance Team and the station staff to monitor performance of the ticketing kiosks using the Monitoring Control Console (MCC) workstation.
• Perform remote troubleshooting on the ticketing kiosks if required.
• Coordinate and work with maintenance team and station staff in:

- Compiling fault data for ticketing kiosks and generate reports.

- Combining and rearranging data from source documents where required.

- Verify data from maintenance team to ensure data accuracy and improve the ease of understanding.

• Assist in all systemwide software deployment activities to all ticketing kiosks including for Annual Fare Revision Exercise and other ad-hoc projects.
• Monitor performance of ticketing kiosks post software deployment for potential faults/issues.
• Generate backend reports of the ticketing kiosks for investigation purposes.
• Create Work Orders in the Maintenance Management System (MMS) to record details of fault troubleshooting.
• Supports in all ticketing kiosks and MCC workstation related tasks (e.g. update station layout drawing).
• Any ad-hoc additional duties as instructed if required.

Job Requirements:

• Nitec in Engineering or any other relevant field.
• Possesses high accuracy in processing information.
• Able to work independently and in a team in a challenging environment
• Candidates with no experience are welcome to apply

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Responsibilities:

• Advanced low-power physical design/integration flow development.
• Full-chip floor planning and place & route.
• Power network design and analysis.
• Support signoff timing closure, power integrity, and signal integrity.
• Physical Verification using DRC, LVS.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power physical design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Key Responsibilities:

• Drive the overall Company’s Quality Assurance and Quality Control functions and programmes.
• Support the Project Management and QAQC teams in the development and implementation of Project Quality Plans (PQP)/CONQUAS/Quality Mark/Quality Management plans to achieve and maintain the highest level of Quality Standards.
• Ensure strict compliance with various Contractual QAQC Requirements conforming to Project requirements.
• Oversee the renewal audits & surveillance certification audits of existing ISO 9001 certifications to the latest versions.
• Act as main liaison party with external certifying body on all ISO certifications related to Quality.
• Oversee the continuous operations of the In house Academy with HR department to upskill and train all employees internally through in-house courses/training
• Conduct site-based Quality-related training to promote quality culture, better knowledge and awareness among project site staff.

Qualifications:

• Possess a recognized Engineering Degree with certification preferably BCA CONQUAS / QM manager certification and if having as Internal ISO 9001 Auditor certification is a plus point.
• At least 3 years' experience as a QA / QC role.
• Experienced in BCA CONQUAS / Quality Mark assessments is preferred
• Possess good communication skills and positive working attitude

a. Conduct feasibility study to develop basic and detailed engineering designs.

b. Manage budget and resources to ensure timely project completion.

c. Manage project to ensure compliance with legal and safety requirements.

d. Motivate team members and develop their skills.

e. Oversee workplace safety to ensure work is performed according to workplace safety procedures.

f. Minimum 2 years experience in Building Construction works.

Responsibilities:

· Pre and post technical support to customer on vision

· Provide technical support to customer

· Provide on-site service

· Evaluate and qualify knew products

Requirements:

· Degree or Diploma in Electrical / Optics Engineer

· 3 to 5 years of experience on machine vision application

· Good understanding on camera / lens / optical

You will be at the core team of Delta Research Center leading disruptive technological advancement with strong business value that empower company’s new business in intelligence machines, robotics and automation. As a research engineer, you will collaborate with technical experts to develop state-of-the-art mobile robot products / solution. You will play a key role in continuously improving existing and new products /technology, as well as be part of a dynamic and growing ecosystem in this field. You will manage and execute research programs and projects – particularly in the domain of robotic manipulation that develop and deliver impactful research and business outcomes.

Key Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Integration, testing and validation of R&D outputs into AMR platforms
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including own products
• Providing hands-on on-site support for software development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable software packages
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Job Requirements:

• Degree/Masters in Electronics, Computing, Mechatronics Engineering or equivalent
• Candidates with 3-4 years relevant experience in robotics research, integration, and development will be considered for a senior position
• Passionate in robotic navigation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in programming languages such as Python and C++, and/or other languages
• Proficient in robot programming using Robot Operating System (ROS) and Linux environment
• Proficient in software development in a collaborative environment using CI/CD tools
• Experience in one or more of the following domains will be preferred: Localisation, Mapping, Navigation, Machine Vision, Path Planning, Motion Planning, and/or Mission Planning
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

General Accountabilities

• Regular visit to SI key partners to further expand and explore potential sales opportunities.
• Supporting key Partners on Sell out Targets set by HQ.
• Planning product promotion according to R&D and marketing research;
• Provide customer support and product solutions training
• Participate in important project product selection, solution providing, bidding scheme and implementation plan evaluation;
• Develop and implement quarterly sales plans and achieving individual KPI set and any other scopes as determine by management.

Job Qualifications

• Candidate must possess at least a Bachelor's Degree.
• Min. 5 years‘experience in related field.
• Good communication ability, can work under pressure
• Strong understanding and background in video surveillance security market will be advantageous.
• Preferred with relevant technical background experience.
• Service-oriented, analytical and takes ownership to solve problems.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Company Overview:
Additive Inn is a dynamic and innovative 3D printing company based in Singapore. We specialize in prototyping, manufacturing, and design solutions. We seek a passionate and skilled 3D Printing Production Engineer/Technician to lead and grow our 3D printing production department.

Key Responsibilities:

• Department Development: Establish and manage a 3D printing production department, implementing efficient workflows and systems.
  Evaluate and procure 3D printers, materials, and accessories to enhance production capabilities.
  Collaborate with management to define production goals and KPIs.
  
• 3D Printer Maintenance & Operation: Operate and maintain various types of 3D printers, including FDM, SLA, SLS, and others as required.
  Troubleshoot and repair 3D printers to ensure minimal downtime.
  Perform regular calibration, cleaning, and upgrades on all equipment.
  
• Production Workflow: Prepare and optimize 3D models for printing using slicing software (e.g., Cura, PrusaSlicer, PreForm, etc.).
  Monitor printing processes to ensure accuracy, efficiency, and quality of output.
  Implement post-processing techniques (e.g., sanding, polishing, painting) where needed.
  
• Technical Expertise & Support: Provide technical support to clients and team members, addressing issues with designs, prints, or equipment.
  Identify and resolve challenges in production, including material compatibility and design feasibility.
  Maintain a log of issues, repairs, and solutions for continuous improvement.
  
• Documentation & Reporting: Document production processes, machine settings, and troubleshooting steps.
  Prepare reports on production performance and recommend improvements.
  

Requirements:

• Diploma or degree in Engineering, Manufacturing, or a related field.
• At least 1 year of hands-on experience with 3D printing technologies (FDM, SLA, etc.).
• Proficiency in slicing software such as Cura, PrusaSlicer, PreForm, or equivalent.
• Strong mechanical aptitude for troubleshooting and repairing 3D printers.
• Understanding of 3D modeling software (e.g., Blender, Fusion 360, SolidWorks) is a plus.
• Interest in continuous learning and staying updated with advancements in 3D printing.
• Ability to work independently and manage multiple priorities.

What We Offer:

• Opportunity to build and lead a dedicated 3D printing production department.
• Hands-on experience with cutting-edge 3D printing technologies.
• A collaborative and innovative work environment.
• Competitive salary and growth opportunities.

Join us at Additive Inn and be a pioneer in shaping the future of 3D printing production!