Roles & Responsibilities

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil and structural works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Job Requirement:

· The RTO shall be accredited by the Institute of Engineers Singapore (IES) and/or Association of Consulting Engineers Singapore (ACES).

• Candidate must possess at least Bachelor's Degree/ Post Graduate Diploma or equivalent.
• The RTO shall have minimum of THREE (3) years engineering experience
• Required Skill(s): Organizing, Planning and Prioritizing Work, Time Management, Communication, Go-getter mindset

Kindly submit the updated CV along with copy of RTO Certificate, BCSS

• To Check all drawings, specifications and schedule of works as per the contract document and reporting the discrepancies to consultant and contractor in order to avoid progress delay.
• Full-time site supervision and inspections to ensure that all structural works are carried out as per approved specification and also as per drawings with approved material in an appropriate sequence and methods.
• Inspect and monitor quality of architectural finishing materials delivered to site and quality of workmanship.
• Carry out supervision and co-ordination of architectural works of the project and shall exercise all reasonable skill, care and diligence in discharge of the contract.
• Assist RE in supervision and inspecting all structural works.
• Assist CPM in site progress and update proper site records about the progress of work and documentation.
• Attend site meetings and site walks with clients and consultants.
• Ensure timely submission of shop drawings, method of statement, other technical submissions, material samples and trade demonstration by the contractors.
• Assist and co-ordinate with consultants to resolve any technical and interfacing issues.
• Familiar in consultant Quality Management System and make proper documentation for QMS audit to comply HDB audit.
• Liaise with contractor on work schedule, progress, work quality and quality control etc.,
• Witness and verify any field test carried out on site.
• Monitoring Site Instrumentation report (Settlement marker, Vibration report, Noise meter).
• Update Monthly progress report and daily site activities report.
• Enforce quality control, Safety management, Vector control and tidiness of the work site.
• Update monthly Consultant Safety and Vector report.

Job Description

The job involves the supervision of MRT projects Cross Island Line.

For those with less than the specified 3 years of relevant experience, training will be provided.

Job Requriements

RTO shall have diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and accredited by and registered with IES/ACES with minimum 3 years relevant experience in supervision deep excavation/ basement works.

- MRT experience will be an advantage.

- To assist RE & SRE to monitor all site activities

- Willing to work on night & rotation shifts

Role Overview

Supervision and co-ordination of excavation and trenching of the installation of fire hydrant chambers and pipes (both

mechanical joint and push-on joint methods) are done using approved earthquake resistance Kubota Pipes

Ensure that all installations are in accordance with the Kubota GENEX pipe installation methods, approved drawings, and

applicable local Codes, Regulations and Standards

Role Responsibilities

Inspect and monitor quality of workmanship of the works on site

Check all drawings and contract specifications (including authority aubmission drawings and shop drawings) Job

Requirements

Knowledge of Microsoft office words, excels and PowerPoints

Able to commit night shift & overtime

· Review Method Statement & Risk Assessment Document & Inspection Test Plan procedure

· Review the Quality Assurance (QA) & Quality Control (QC) Plan and Procedure Documents

· Follow the approved engineering drawings /documents & carried out inspection.

· Review & follow QP/PE Design approved documents

· Read & follow project requirements

· Daily site survey & monitor site activity

· Review Site Construction Query (SCQ) & approval

· Review project overall schedule on weekly basis on construction and inspection activities

· Checking procurement report & closely follow up

· Internal meeting with Eng., Team & contractor

· Follow-up & monitor daily project schedule

· Carried out Inspection as per AFI

· Attend FAT at vendor facility

· Prepare weekly report

· Checking daily & weekly report by contractor

· Attend Meetings with Stake holders

· Participate safety site walkdown

· Review third party inspection FAT documents

· Closely follow-up with punch list & carried out inspection

· Review Construction MOM & Monthly report

Job Requirements

Possess at least Degree in (Mechanical) Engineering

Must be experienced in supervision of Changi Airport Runway Projects

Minimum 5 Years of experience as RTO on local projects

Registered resident technical officer with IES/ACES

Ensure Airport Operational and Safety Requirements

Ensure all Regulations and Standards of the Runways, Taxi ways, Military Taxi way and Airport Emergency Service

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skill

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Company Brief:

Triflex is a German family-owned business with more than 40 years of experience in manufacturing and distributing a wide range of reliable and lasting waterproofing solutions for the protection of buildings. The core competence of Triflex is the field of waterproofing systems and coating materials for the construction sector. Triflex's production, development and central functions are brought together in Minden, Germany and is successfully represented worldwide and in the Asia Pacific region, through our sales and distribution office in Singapore.

Our organizational culture is characterized by positive collaborations, respect, trust and cohesion across teams and cultural boundaries. With our company hierarchies being flat and decision-making paths are short - this is the right environment for those with innovative ideas and impulses. Our employees receive appropriate intensive introductory training and continue to support them in their professional development with a wide range of internal and external training opportunities. As an innovative employer, we offer exciting jobs with interesting prospects and a high degree of creative freedom. Reliability, focus on service and innovation are the values we work by every day in our customers’ interest.

Interested applicants may submit their resume by email to triflex.asia@triflex .com with the subject format– Applicant Name: Technical/Engineering Services Manager (Waterproofing)

Job description:

We are seeking specialist to fill in the role of a Technical/Engineering Services Manager for waterproofing construction projects in Singapore. The successful applicant's primary responsibility is to provide support for Triflex waterproofing product application to all our customers. He will work closely with building contractors, engineers, site supervisors and facility managers to create solutions for waterproofing challenges and to demonstrate application techniques waterproofing projects. This is a challenging and rewarding opportunity for an ambitious individual with a passion for specialist waterproofing products and the desire to make a real difference in the building industry.

The successful applicant shall be responsible for:

1. Product presentations and demonstration

2. Development and implementation of technical training program for applicators

3. Analysis of project site requirements

4. Assessment of business opportunities for Triflex products

5. Support on clients' project execution throughtout its term

6. Safety briefing and risk assessment

7. Applicator training and competency check

8. Compliance oversight (method statement, safety protocols, building standards)

9. Client relationship building (decision makers, designers / planners, project execution team)

10. Reporting and documentation (project status, technical meetings /trainings)

Qualifications Required

1. Minimum 3 years working experience as a site supervisor for building envelope construction, specializing in waterproofing, roofing, flooring or tiling.

2. Well acquainted with various building envelope materials and construction methodologies.

3. Extensive experience in handling waterproofing materials, application techniques, industry standards, as well as local regulations and building codes for waterproofing in Singapore.

4. Proven track record in working with project engineers, building contractors and property owners.

5. Able to understand shop drawings and specification documents.

6. Demonstrated ability to build rapport and maintain strong relationships with customers and partners.

7. Able to understand shop drawings and specification documents.

8. Fluent in both spoken and written English, knowledge of local language is an advantage.

9. Must be physically fit, mentally agile and able to work under varying work schedule.

10. Possesses class 3 driving license in Singapore.

Required Soft Skills

1. Able to present confidently and convincingly to a wide variety of audiences/ groups.

2. Teamworking, relationship-building and influencing skills.

3. A methodical approach to work, organized and time conscious.

4. Reliable and prudent in the use of company resources.

5. Resourceful, analytical, focused on solution-based approach.

6. Open-minded and self-directing.

Educational Requirements

Minimum ITE in an industry-relevant field of study (Building Construction).

Others:

Singaporeans only.

Commencement date:

Able to start work immediately.

Role Overview

• To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

• To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations
• To lead technical investigations in response to fault calls
• To review documentation on procedure and schedules of maintenance works
• To track inventory levels of spare parts, consumables and non-consumable items
• To prepare technical reports and / or monthly reports where required
• To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices
• Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.
• Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.
• Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.

Responsibilities:

1. Assist M&E Engineer, Superintending Officer Representation (SO Rep) and Resident Engineer (RE) in the supervision and quality assurance of construction works on site
2. Provide standing supervision as and when required by the M&E Engineer, SO Rep and RE
3. To ensure all installation methods and material used are in accordance with the approved drawings and specifications
4. Liaise with the Contractors/ sub-contractors and other Resident Technical Officers (RTO) in the coordination of site works
5. Highlight discrepancies, resolve site M&E issues and monitor site progress
6. Feedback site progress and irregularities to M&E Engineer, SO Rep and RE
7. Attend site meetings, site inspections, testing and commissioning
8. To check as-built drawings to tally with site installation
9. Ensure the contractors maintain work safety, cleanliness and tidiness of the site
10. Documentation of site records, ie. Inspection records, T&C records, site meetings etc.
11. Aware of the potential and actual OH&S hazards of his activities at the workplace and to highlight / communicate to the PM when he knows of any irregularities. He shall be aware of his individual OH&S obligations by ensuring that he is adequately equipped with appropriate safety gears, by observing closely to all safety rules / regulations / procedures at site and by attending all relevant site safety trainings.

Requirements

1. Diploma in Electrical/ Mechanical or Building Services Engineering from local Polytechnic or other tertiary institutions of equivalent standing
2. Minimum eight (8) years of M&E work experience as a Resident Technical Officer
3. Conversant in local construction practices, air-conditioning, electrical, fire protection, plumbing and sanitary services.
4. Good co-ordination skills
5. Good analytical ability with strong verbal and written communication skills.
6. Self-motivated, proactive and team player
7. Past work experience in healthcare/residential/institutional projects is preferred.

The resources will have the below qualifications:

• Required skills include 3+ years of experience in the implementation, maintenance and analysis of data center facilities, hardware, communications infrastructure, strategies, tools and effective troubleshooting techniques.
• Basic background on enterprise data center facilities and infrastructure environments such as PDUs, RPPs, network and SAN infrastructures. In depth knowledge on complex, Enterprise class inter-networked environments involving a combination of switched/routed/shared Ethernet, TwinAx (100GigE, 25GigE,10GigE, GigE, 100M, and 10M), token ring, SAN, and wide area connectivity.
• Strong knowledge of WAN technologies (OC-x, DS-x), subnetting and TCP/IP protocol a must.
• Knowledge of trouble ticketing systems, change control, Project processes and associated tools.
• Logical problem- solving techniques and associated experience in system, data center facilities, and telecommunications.
• Experience with project management.
• Financial Services industry knowledge a plus.

Interested candidates, please send over your resume to [email protected]

Contract Period:

• 16 January 2025 TO 15 January 2026

Deployment:

• Mondays to Thursdays: 9:00am to 6:00pm, inclusive of 30 minutes lunch break
• Fridays: 9:00am to 5:30pm, inclusive of 30 minutes lunch break
• Service not required on Saturdays, Sundays except by special arrangement with off-in-lieu provision
• Service not required on gazetted public holidays

Scope of Works:

Technical Support Officer Art:

1. To assist the art dept with acquisition of materials (receiving, DO processing of purchases, sorting and keeping purchases) as well as do paperwork for condemnation of obsolete or damaged items, carry out disposal
2. To manage maintenance and upkeep of Art rooms and resources in the Art Block (6 Art rooms and Kiln room, Woodwork room, darkroom and other related areas, including art materials and assets. E.g, Drill press, Bend Saw, 3D printers)
3. To supervise students at work when no teaching staff is around, invigilate tests and internal exams when called upon for assistance.
4. To provide support in managing the attendance of Sec 1-4 AEP Centre students and communicate with sending schools and parents on results and other admin matters
5. To oversee security of the art rooms by monitoring CCTV data, locking up rooms at 6pm.
6. To provide support and logistical assistance for department and students’ participation (Eg SYF Art Festival) and organisation of art exhibitions (Eg in 2025, Art Festival)
7. To assist in photo-documentation of students at work for purposes of T&L review
8. To oversee any repairs or renovation works being carried out (Eg Renovation of art gallery)

Music:

1. To assist the music dept with acquisition of materials and resources/instruments, repair of instruments as well as all related admin related to procurement of goods or services (receiving, DO processing of purchases, sorting and keeping purchases)
2. To assist in the maintenance and upkeep of the 5 music-learning rooms, including management of the library, cataloguing and stock taking
3. To supervise students at work on occasions when teaching staff is not around.
4. To oversee security of the art rooms by monitoring CCTV data, locking up rooms by 6pm during term time.
5. To assist in setting up for lessons in terms of instruments / computer / electronic set up
6. To assist in setting up of video cameras for practical examinations

Requirement:

• Good communication and interpersonal skills
• Good team player with a high level of initiative and independence.
• Proficient in MS Office and Excel
• Candidate with prior working experience in schools (at least in the last 2 consecutive years), directly with students.

Location: Changi

Responsibilities

1. Monitor, supervise, and inspect works

2. Ensure quality control and compliance

3. Review drawings, specifications, and materials

4. Manage defects, progress, and records

5. Ensure safety, cleanliness, and tidiness on site

6. Implement mitigation controls from risk registers

Work Arrangement:

- Night shifts

- Sundays

- Public Holidays

- Assigned shift duty roster

Key Skills:

1. Technical knowledge (construction,mechanical/electrical)

2. Leadership and supervision

3. Quality control and assurance

4. Safety management

5. Communication and interpersonal skills

Qualifications & Experience

1. 5+ years of experience in RTO role

2. 3+ years in supervision of complex construction works

3. Diploma in Mechanical/Electrical discipline

4. Accredited by JAC (IES/ACES)

5. WSHMCI certification (or SCW/BCSS)

• As part of Project Management Team responsible to manage implementation projects.
• Responsible to manage the infrastucture project from initation to closure as per business requirement.
• Develop process and implementation strategy, monitor the execution, and solve critical project risks and issues mainly tactical, procedure, and resource issues.
• Proactively identify dependencies, risk, issues and scope changes for on-going projects.
• Provide regular Executive Summary for Head of Project Management and all relevant stakeholder regarding projects’ progress.

Requirements:

• Bachelor degree in Computer science or Information Technology related.
• Must be PMP certified
• Leadership and management experience handling a team of 10-20 engineers in Data center environment.
• Preferably looking for Project Manager with Banking domain experience.
• Able to work extended hours and perform standby duty after office hours when required.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

1. Mechanical experiments and design
   • Experiments - e.g. designing variations to the grout extruder to allow less waste and better reliability
   • Design - e.g. most of the upcoming v4 robot is being designed by interns with Jakub supervising them
2. Mechanical manufacturing, assembly and testing (only for R&D, our manufacturing is outsourced)
   • 3D printing - Slicing prints (often for multi-filament printing), managing and repairing printers (we have Tenlog TL-D3, TL-D5, Ender 3, Prusa i3)
   • Outsourcing manufacturing - specifying cabling, machining etc. to manufacturers
   • Machine tools - making some parts by hand when we need to quickly iterate
   • Assembly - putting in inserts, bolting parts together, waterproofing
   • Testing - testing the robot’s grout extrusion and cleaning, making minor adjustments to make sure everything is running properly and robot produces nice grout lines
3. Electrical experiments and design
   • Design - most of our PCBs have been designed by interns, aiming to minimise free wires in the robot, speed up assembly, allow easy modification where needed. Generally connecting all modules, controlling power, providing a physical user interface…
   • Experiments - e.g. sourcing and testing various motor and driver combinations to pick for our drive system
4. Electrical assembly (only for R&D, our manufacturing is outsourced)
   • Outsourcing production of cable assemblies and PCBs
   • Where necessary to make modifications - soldering PCBs, soldering power cables, crimping cables
5. Embedded programming
   • Writing object oriented C++ code
   • Keeping the code clean and maintainable
6. Robotics DevOps & Real World Industry Trials (expect to be on site 1-2 times a week)
   • Understand the whole project and run our ROS2 stack on real HW.
   • Create reproducible testing methodology and evaluate metrics on the HW.
   • Be in charge of the robots on the construction site.
   • Explore and procure new parts/new materials for robot functionality improvement

A great candidate would possess the following:

• Motivation to build a great product and great codebase using the most recent tech stack for the slowly coming robotics revolution
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Excited about robotics and similar technical areas and exploring them in extracurricular projects
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals

Role Overview

Supervision and co-ordination of excavation and trenching of the installation of fire hydrant chambers and pipes (both mechanical joint and push-on joint methods) are done using approved earthquake resistance Kubota Pipes

Ensure that all installations are in accordance with the Kubota GENEX pipe installation methods, approved drawings, and applicable local Codes, Regulations and Standards

Role Responsibilities

Inspect and monitor quality of workmanship of the works on site

Check all drawings and contract specifications (including authority aubmission drawings and shop drawings) Job Requirements

Knowledge of Microsoft office words, excels and PowerPoints

Able to commit night shift & overtime

· Review Method Statement & Risk Assessment Document & Inspection Test Plan procedure

· Review the Quality Assurance (QA) & Quality Control (QC) Plan and Procedure Documents

· Follow the approved engineering drawings /documents & carried out inspection.

· Review & follow QP/PE Design approved documents

· Read & follow project requirements

· Daily site survey & monitor site activity

· Review Site Construction Query (SCQ) & approval

· Review project overall schedule on weekly basis on construction and inspection activities

· Checking procurement report & closely follow up

· Internal meeting with Eng., Team & contractor

· Follow-up & monitor daily project schedule

· Carried out Inspection as per AFI

· Attend FAT at vendor facility

· Prepare weekly report

· Checking daily & weekly report by contractor

· Attend Meetings with Stake holders

· Participate safety site walkdown

· Review third party inspection FAT documents

· Closely follow-up with punch list & carried out inspection

· Review Construction MOM & Monthly report

Job Requirements

Possess at least Degree in (Mechanical) Engineering

Must be experienced in supervision of Changi Airport Runway Projects

Minimum 5 Years of experience as RTO on local projects

Registered resident technical officer with IES/ACES

Ensure Airport Operational and Safety Requirements

Ensure all Regulations and Standards of the Runways, Taxi ways, Military Taxi way and Airport Emergency Service

Purpose of role

· Responsible for identifying new Business Opportunities and with the clear target to becoming a trusted advisor / partner to the client

· Responsibility for overall pipeline, forecasting and demand generation to agreed personal KPI’s and financial targets.

Through

· Achievement of a mix of strategic, consultative and relationship selling, the successful candidate will be expected to create, nurture and grow relationships within their assigned areas to deliver new business.

· Have an understanding of client’s needs and by developing a range of strategies to address both customer proposition and broader competitive environment requirements.

· Leverage relationships across company to ensure its propositions are presented pro-actively to the client and drive incremental business opportunities

Detail Description:

· Minimum of 15 years’ experience in Telco sector and experiences with Tier 1 telco carriers would be a plus and with proven demonstrable success

· Fluent in English speaking, reading, and writing.

· A clear stakeholder engagement approach supported, when necessary, with a clear communication plan

· Strong technical understanding of mobile networks technologies: Wireless Network, CN/IN/IT. Expertise in at least one of them; cross-area expertise an added advantage

· Self-reliant and self starting / proactive

· Ability to translate technical solutions into business and financial benefits to a customer – what the solution does for the customer rather than what the technology contains

Job Description:

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team & Resident Engineer on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To attend site, progress, variation and coordination meetings
• To coordinate with Resident Engineer with respect to C&S engineering works, architectural and M&E engineering works
• Period: 36 months
• Start from: December 2024

Requirement:

• Min Diploma in Civil Engineering, Construction Engineering, Architectural or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Technical Officer Certificate accredited by IES / ACES
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

PLEASE APPLY HERE ONLY - https://jobs.sap.com/job-invite/409693/

ABOUT SAP

As the market leader in enterprise application software, SAP empowers companies of all sizes and industries to innovate through simplification. From back office to boardroom, warehouse to storefront, on-premise to cloud, and desktop to mobile, SAP enables people and organizations to collaborate more effectively and leverage insights to stay competitive. SAP’s applications and services help customers operate profitably, adapt continuously, and grow sustainably.

PROGRAM DESCRIPTION

Within the Customer Services and Delivery (CS&D) board area, the mission of SAP Enterprise Cloud Services is to shape the future of SAP by providing a comprehensive, end-to-end managed services experience that supports customers throughout their cloud transformation journey. Our goal is to offer a range of cloud deployment options, leveraging SAP’s infrastructure, partner infrastructures, and public cloud platforms.

THE ROLE

The Technical Service Manager (TSM) plays a critical role within the SAP Enterprise Cloud Services - APJ & GCR organization as a trusted advisor, responsible for safeguarding and optimizing customers' investments in SAP Enterprise Cloud Services. As the primary point of contact for customers in technical discussions and escalations, the TSM is tasked with developing a deep understanding of each customer’s landscape, advising on technical requirements, and addressing complex challenges throughout the customer lifecycle. This role also involves close collaboration with Customer Delivery Managers and internal delivery teams to ensure customer satisfaction through the delivery of high-quality services.

ROLE REQUIREMENTS

Key Responsibilities

• Serve as the primary technical contact for SAP Enterprise Cloud Services customers, offering guidance and support across their lifecycle.
• Gain a deep understanding of customer goals and challenges to offer tailored solutions and recommendations.
• Manage and resolve escalations related to SAP Enterprise Cloud Services customer landscapes.
• Advocate for value-added services within the SAP Enterprise Cloud Services portfolio to meet customer needs.
• Collaborate with SAP Enterprise Cloud Services delivery units to establish long-term service plans and account visions.
• Participate in on-site customer visits when necessary and support customers’ Intelligent Enterprise transformation as a technical consultant.

Education, Skills, and Competencies

• Bachelor’s degree in Computer Science, Engineering, or Information Management (or equivalent experience).
• Solid expertise and in SAP technologies (SAP certification preferred).
• Strong focus on customer service and communication, with the ability to explain technical details to non-technical audiences effectively.
• Analytical and solution-focused mindset with excellent English communication and presentation skills.
• Proven skills in managing customer escalations, process improvements, and key relationships.
• Working knowledge of hyperscalers, multi-cloud integrations, networking, and virtualization technologies (e.g., load balancers, VMs).
• Ability to perform under pressure and consistently deliver value to customers and the organization
• Experience working with international and cross-cultural teams for seamless project execution.

Work Experience

• 9+ years of SAP technology (BASIS) experience in the IT industry.
• 5+ years of customer-facing experience, with demonstrated skills in de-escalation, conflict resolution, and executive-level relationship management.
• Proven technical project management skills to handle complex customer projects efficiently and resolve issues effectively.

#SAPECS #ECS #SAPTechnicalConsultant #SAPBasisCareers

WHY JOIN US

This is an exciting opportunity to join SAP’s dynamic, international team and make a significant impact on the future of cloud services. If you're passionate about driving customer success, thrive in a fast-paced environment, and have a deep technical expertise, you will find immense satisfaction in this role. Join us and contribute to helping customers navigate their cloud transformation journeys while advancing SAP’s cloud capabilities.

If this sounds like the perfect fit for you, we look forward to hearing from you!

LOCATION

Singapore

EXPECTED TRAVEL

Expected travel requirement is 10%

SAP'S DIVERSITY COMMITMENT

At SAP, we believe that innovation thrives through the development of a diverse workforce. We celebrate and appreciate the unique competencies that each individual brings to the company.

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

Job Description:

1. Attend Customer Design discussions.
2. Help Customer with Network Integration Activities.
3. Network Acceptance Testing
4. Help Customer with Network Migration activities.
5. Network Monitoring after migration or integration.

Job requirements:

• Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.
• Basic understanding of software development processes, IT infrastructure, or other technical fields relevant to the organisation.

Qualification:

• Registered RTO in Accredited with the Joint Accreditation Committee of the Institute of Engineers Singapore (IES) and the Association of Consulting Engineers (ACES).

Experience:

• Minimum 1 years’ experience in the supervision of building projects in Singapore.
• Conversant in M&E design, specifications, site installation, services coordination, code of practice, Authority inspection and handover.
• Conversant in contract administration with Public Service Sector Conditions of Contract, conversant with statutory requirements, site management, quality control procedures, system testing & commissioning and submission of progress report.

Duties:

• Full-time on site.
• Carry out the supervision of building works as stipulated in the Building Control Act and work under the control and direction of the appropriate Qualified Person when carrying out the supervision.
• Expect to work overtime on some weeknights and Saturdays where required. Overtime is claimable via timeoff for the next day, subject to approval.
• Carry out the supervision on site for diversion services when required.

Site Location:

• East area.

Salary Range:

• $4,500 to $6,500.

Job Duties:

• Complete responsibility for all aspects of WET department / sub function or has professional leadership within the company on a broad unique subject.

• Develops new methods of problem solving for department

• Integrates work of own department with other departments. Has to consider impact of solutions to other departments and find overall solutions; can be in global environment

• Generally solves issues in principle, leaves specifics to staff

• Has full staffing responsibility

• Highest authority of subject matter content

• Balances short term and long term goals

• Balances financial, resource and people issues

• Integrates subject matter and industry expertise within a defined area

• Accountable for budget and end results for area managed including cost management.

• Provides advice and counsel related to the operation of the business to leadership teams based on deep subject matter expertise.

• Work is guided by functional strategy and area goals and operational objective.

• Sets area objectives and work plans in alignment with functional strategy.

• Ensures that procedures, processes and standards are continuously reviewed, tested and aligned with the business.

Qualification

• Bachelor degree or above in Electrical, Electronics, Mechanical, Mechatronics, Microelectronics Engineering.

• 8+ years of relevant experience in process engineering, preferably in Electronics, Electrical industry.

• Fab 12" knowledge is preferred

• Proven ability to identify, assess and solve problems

• Analytical with good interpersonal skills

• Team leader with execellent communication/coordination skill.

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. With a minimum of 7 years relevant industrial work experience

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Role Overview

To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

• To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations
• To lead technical investigations in response to fault calls
• To review documentation on procedure and schedules of maintenance works
• To track inventory levels of spare parts, consumables and non-consumable items
• To prepare technical reports and / or monthly reports where required
• To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices
• Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.
• Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.
• Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.