• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Together with the QP(S), provide overall team direction and management to realise the project objectives and activities as required by the Superintending Officer and consultants, ensuring that the project is delivered to the highest technical and safety standards
• Review Contractors’ proposal, method statements and designs
• To assist QP(S) and QP(Geo) in reviewing the construction proposals and implement supervision oversight of these construction works carried out by the Contractors
• Lead the RTOs to check all drawings (including shopdrawings, construction drawings) and specifications for discrepancies
• Overview of the quality system implementation, materials approval and compliance testing procedures
• To provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site
• Carry out any other duties related to the Project, including administrative tasks as directed by the CAG

Requirements

• The RE-Geotechnical shall have minimum five (5) years of relevant experience as a geotechnical engineer, of which at least three (3) years shall be in supervision of works in bored piling and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation
• The RE- Geotechnical shall possess a Geotechnical engineering degree recognised by the Professional Engineers Board of Singapore
• The RE- Geotechnical shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all works including all civil and architectural works, plumbing, sanitary, drainage, irrigation and sewer system, commuters facilities, road works, trial trenches and utilities diversion etc.
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems systems and gantry crane and submit evaluation report endorsed by a PE
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works associated to micro-tunneling and mining, Flyover works, sewer diversion (including shaft construction and pipe-jacking operations.

Requirements:

• Diploma or Degree in Civil and Structural Engineering
• At least 4 years’ of experience, of which 3 years experience in either geotechnical works or airport construction.
• Possess a valid RTO cert by IES Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO-building shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO-Geo shall preferably possess a Diploma from Polytechnic or relevant qualifications.
• The RTO-Geo shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• The RTO-Geo shall have a certificate in Building Construction Supervisors Safety (BCSS) Course.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

Stand in rate to be discussed during interview.

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, and other matters concerning the site staff administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that the Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To oversee Tunnelling works
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in various tunneling works
• Degree in Civil Engineering
• Accredited as a RE with a valid 2022/2023 IES certificate
• Accredited as a RE(Tunnel) with a valid 2022/2023 IES certificate
• comfortable with 56 hour work week

THE ROLE:

AMD is looking for a Senior Product Development Engineer to work on performance evaluation on our Adaptive Soc and FPGA products. You will work closely with designers to plan, develop, and execute various test to make sure silicon performance and features are meeting design target in datasheet specification. You will be implementing test solutions using FPGA logic to apply characterization patterns and workaround to resolve any silicon issue.

THE PERSON:

If you are PASSIONATE, ADAPTABLE, and INNOVATIVE, AMD is the right place for you.

KEY RESPONSIBILITIES:

• Develop Hard IP system level test around high-speed protocol, such as PCIE, Display Port, Ethernet and USB for system performance measurement.
• Development of RTL test designs, driver to validate IPs
• Takes responsibility for isolating the issue to a specific area such as test gap, SW bug, silicon bug, or process deviation.
• Implement testing across process, voltage, and temperature, as well as volume system testing. To analyze test results to discover trends and outliers
• Diagnose and debug the pattern failures on bench to root cause the problem
• Work closely with cross functional team, such as Design, Application, Product Verification and etc to investigate and find solutions to various issues.
• Working on the cutting-edge AMD Adaptive Compute Platform (ACAP) and devices Generates performance characterization plan with IC designers
• Analyze characterization results and create characterization report
• Apply statistical analysis skills and generate trends for the analysis of device feature performance over process windows.
• Create and improve automation script for data analysis and test automation

PREFERRED EXPERIENCE:

• 5-8 years’ experience in pattern development or analysis on high-speed protocol or transceiver system.
• Extensive knowledge with high-speed protocol system (PCIE, Display Port, Ethernet or USB) is a must.
• Good experience in high-speed protocol system design and understanding their working principle/relationship is a must.
• Proficient in programming languages such as Phyton, TCL and C is a must.
• Familiar with Linux driver and firmware development with x86 or ARM environment is highly preferable.
• Familiar and be able to work under Linux environment is highly preferable.
• Digital logic design knowledge in Verilog is highly preferable.
• Experience in Gate Level Simulation is highly preferable.
• Good understanding of NPI Process, ATE/bench testing and debug isolation methodology is preferable.
• Basic understanding of FPGA. Knowledge of Vivado Software is a plus.
• Self-motivated and a strong team-player
• Strong analytical and problem-solving skills
• Passion in learning new tools and technologies

ACADEMIC CREDENTIALS:

• Bachelor/Master’s degree in Electrical/Electronic/Computer Engineering

LOCATION:

Singapore

Create and execute a strategic project sales plan that expands our customer base and extends the company's business as set

Meet with potential clients and grow long-lasting relationships that address their needs. Set objectives, train and coach foremen, and monitor their performance.

To Lead maintenance, minor work/project teams, advice remedial proposal, manpower, materials, equipment, tools, consumables, height access equipment and other necessary equipment to undertake the following as

The team maintain buildings by making repairs and performing safety checks. Maintain the day to day operations of the building. Perform routine preventive maintenance. Minor Work team performs small values repair under SORs. Ability to work under pressure situations and exercise good judgements. Ability to read and understand test equipment, measuring devices and safety manuals. To carry out any other duties and responsibilities as assigned. Perform as a driver to pick up and drop workers and purchase materials when necessary

He prepares quotations, coordinate repair works schedules, liaise with the subcon / repair work team to start and complete the works. Any other works assigned by management

Capabilities and behaviours

A good team player with strong analytical and leadership skills

Possess good technical knowledge of building works and M & E will be advantage. Possess good communication skills and be able to relate to different levels of people.

Ability to plan, organise and supervise a team of technicians and contractors in carrying out planned and ad-hoc maintenance work.

Possess strong leadership and interpersonal skills with good command of spoken and written English

Must be prepared to perform shift duties and work on weekends and public holidays

Educations & Experience

Prior experience in building operations in commercial buildings will be an added advantage.

NITEC and above or relevant studies.

Team oriented and good interpersonal skills.

Able to perform 12 hour shift and standby duties.

Only shortlisted candidates will be informed

This is a computer generated document. No signature is required

54 Hume Avenue Summer Hill #06-04 Singapore 596231 Tel: 6969 9028 E: [email protected]

Ong GC Consulting Pte Ltd

UEN 201716698N

BCA Registered Contractor (for public sector works) – CR06 (L1) , CR01 (Single Grade)

To Lead maintenance, minor work teams, advice remedial proposal, manpower, materials, equipment, tools, consumables, height access equipment and other necessary equipment to undertake the following as

The team maintain buildings by making repairs and performing safety checks. Maintain the day to day operations of the building. Perform routine preventive maintenance. Minor Work team performs small values repair under SORs. Ability to work under pressure situations and exercise good judgements. Ability to read and understand test equipment, measuring devices and safety manuals. To carry out any other duties and responsibilities as assigned.

He prepare quotations, coordinate repair works schedules, liaise with the subcon / repair work team to start and complete the works

Capabilities and behaviours

A good team player with strong analytical and leadership skills

Possess good technical knowledge of building works and M & E will be advantage. Possess good communication skills and be able to relate to different levels of people.

Ability to plan, organise and supervise a team of technicians and contractors in carrying out planned and ad-hoc maintenance work.

Possess strong leadership and interpersonal skills with good command of spoken and written English

Must be prepared to perform shift duties and work on weekends and public holidays

Educations & Experience

Prior experience in building operations in commercial buildings will be an added advantage. Diploma and above or relevant studies.

Team oriented and good interpersonal skills.

Able to perform 12 hour shift and standby duties.

Only shortlisted candidates will be informed

THE ROLE:

The candidate is required to drive end-to-end board-level and silicon physical failure analysis and develop new FA techniques to enhance productivity rates.

THE PERSON:

You will have strong written and verbal communication skills and a systematic approach to your job. A team player, you are used to delivering results in a fast-paced environment.

KEY RESPONSIBILITIES:

• End-to-end board-level and silicon physical failure analysis (PFA).
• Responsible for electrical FA and physical FA from AMD AECG global RMA, production rejects, reliability, and engineering evaluation failures.
• Collaborate with cross-functional teams on failure root cause investigation and drive continued improvement plans.
• Develop new FA techniques to enhance productivity and hit rate.
• Equipment owner of FA tools.
• Candidates must take on the role of an AMD Company Emergency Response Team (CERT) member for critical lifesaving.

PREFERRED EXPERIENCE:

• Minimum 5 years of experience in package or silicon failure analysis.
• Knowledge of semiconductor circuit analysis is required.
• Knowledge of Optics Fault Isolation, such as OBIRCH, PEM, thermal, SDL, LADA, and LPV is required.
• Hands-on physical FA, such as silicon/package delayering, chemical etching, and cross-sectioning.
• Equipment knowledge of SEM/EDX, 3D X-Ray, SEM-based nano-probing, and AFP analysis.
• Strong problem-solving and communication skills.
• Proactive and able to work with minimum guidance.

ACADEMIC CREDENTIALS:

• Bachelor’s Degree in Electronics Engineering or equivalent.

LOCATION:

Singapore

Responsibilities:

1. Support Production system of LifeAsia and Integral Group

2. Program enhancements/developments related to Life Asia and/or group 400 system

3. Able to interact and coordinate efficiently with other IT Sections and within Core Application Team itself

4. Liaise with Web Application Team on Front-end applications on inter-related projects

5. Perform system analysis, design and system unit/integration testing

6. Prepare/update Technical Specifications and end user system job instructions documents

7. Liaise with external parties pertaining to system collaboration and system testing

8. Observe, maintain and comply with the KPIs, work instructions, guidelines, security controls, audit controls and governance set

9. Ensure quality deliverables, documentation and reporting for work assigned and performed

10. Sound experience in Life Insurance industry

11. At least 5 years hands-on coding experience in SMART 400 on AS400

12. Knowledge of both Life-400 and Group-400 will be an added advantage

• Assist the Operation Manager / Project Manager in coordinating site investigation project, planning of location, site clearances, scheduling.
• Obtaining land permission, utilities services clearances and meeting with stakeholders.
• Meeting and correspondence with Client on project timeline and requirement.
• Organizing of rigs & manpower resources for the site investigation work.

• Relevant degree/ diploma in Geology; Civil Engineering or the Built Environment.
• Familiar with Utilities Services Clearances procedure of various Agencies; and having RES/REO certificate is an advantage.
• Fresh Graduate are welcome

Salary: $2400-$2800+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities:

1. Support Production system of LifeAsia and Integral Group

 2. Program enhancements/developments related to Life Asia and/or group 400 system

 3. Able to interact and coordinate efficiently with other IT Sections and within Core Application Team itself

 4. Liaise with Web Application Team on Front-end applications on inter-related projects

 5. Perform system analysis, design and system unit/integration testing

 6. Prepare/update Technical Specifications and end user system job instructions documents

 7. Liaise with external parties pertaining to system collaboration and system testing

 8. Observe, maintain and comply with the KPIs, work instructions, guidelines, security controls, audit controls and governance set

 9. Ensure quality deliverables, documentation and reporting for work assigned and performed

 10. Sound experience in Life Insurance industry

 11. At least 5 years hands-on coding experience in SMART 400 on AS400

 12. Knowledge of both Life-400 and Group-400 will be an added advantage

MITRE ASIA PACIFIC SINGAPORE (MAPS)

Under the initial sponsorship of Civil Aviation Authority of Singapore (CAAS), The MITRE Corporation, a U.S.-based, globally renowned research and development company, established its premier air traffic management research center in Singapore to support the growth in the Asia Pacific Region. This research center, MITRE Asia Pacific Singapore (MAPS), is in need of an Associate/Intermediate Data Scientist / Software Engineer to be part of a dynamic team of professionals working to improve air traffic operations in Singapore and the Asia Pacific region. The ideal candidate possesses excellent verbal and written technical communication skills, strong analytical abilities, the desire to acquire new skills, and the trait of being self-driven.

Key responsibilities include:

· Develop, maintain, and monitor data analytics that produce high quality data

· Analyze and visualize data products to derive insights and assess data quality

· Continuously improve the codebase and our development/deployment processes

· Consult with analysts and data consumers to ensure their needs are met

· Collaborate with peers during sprint planning, technical discussions, and code reviews

· Write clean and testable code that works consistently, both locally and on the compute cluster

Minimum Requirements:

• Good honours degree in in Computer Science, Mathematics, or other physical science/engineering fields), or equivalent practical experience

• 0-5 years relevant work experience

Preferred Qualifications:

• Experience with software development using Java, Python, and/or another high-level programming language

• Experience with data science techniques, data analysis, modeling, and visualization using Python, R, and/or Clojure

• Experience with Git version control software

• Familiarity with big data, distributed systems, and/or cloud platforms (Hadoop, AWS, Spark, Kafka, etc.)

• Familiarity with Agile and DevOps principles and practices

• Comfortable learning new languages and ideas

• Creative problem solvers and risk takers

• Ability to collaborate effectively with teammates, technical partners, and stakeholders

Fresh University graduates are encouraged to apply. Preference will be given to candidates who have knowledge of and/or experience in the field of air traffic operations. There is currently one opening. Interested candidates should inquire within The MITRE Corporation by emailing [email protected] by 25 April 2024.