Position Overview:

To ensure nominated vessels are maintained & operated in line with Statutory Instruments, Company Policy & Safety Management System, Industry Best Practice & Vessel Owners Requirements.

Key Responsibilities & Accountabilities:

1. Act as the single point of accountability, monitoring all onboard activities and providing Technical & Operational Guidance and Support to the Master & crew of nominated vessels as required.
2. Ensure Safety & Environmental Compliance with respect to Statutory Regulations, Company Policy & Safety Management System, Industry Best Practice, and owner’s requirements are given the highest priority by both the shore and vessels staff.
3. Monitor and support all operations onboard nominated vessels closely, provide assurance that they are undertaken in full Compliance with Statutory Regulations, Company Policy & Safety Management System, Industry Best Practice, and owner’s requirements, whilst meeting efficiency & economic expectations.
4. Ensure compliance with Wallem’s SMS, flag and class’s rules and regulations, state requirements, TMSA and other vetting agencies’ conformance.
5. Support Operations superintendent and work together for common objective to operate vessels as required under the SMS and within the purview of Shipman Agreement.
6. Responsible for all budgetary expenditure on nominated vessels, provide timely reports & analysis to Fleet Manager(s) and Owner(s) as required.
7. Responsible for operating vessels within KPIs set out by Wallem’s SMS while maintaining priority on safety and pollution prevention. Technical Superintendent works with other departments of Wallem for meeting commercial expectations and maintaining vessels sea-worthy.
8. Act as Client/Owners point of contact ensuring the highest level of customer Service & Satisfaction are maintained whilst also protecting the Wallem brand and our employees from risk.
9. Provide Direction, Coaching, Guidance, Mentoring and Evaluation of senior sea staff to ensure that all operations are carried out safely & successfully whilst also enabling senior sea staff with their individual career progression & development.
10. Monitor and maintain a thorough knowledge of current Technical Superintendents Work Instructions which maybe subject to review and revision from time to time, whilst completing all Tasks detailed in the Technical Superintendents Work Instructions for nominated vessels.
11. Monitor and optimize vessels and seafarers’ performance. Collaborates with other stakeholders to ensure that vessels and seafarers have adequate resources to perform.
12. Review, write and provide feedback on development area of seafarers, work-performance during specific contract, while setting clear goals and targets.
13. Act as part of the Shore base Emergency Response team as required.
14. Complete any additional tasks as reasonably requested by the Fleet Manager.

Requirements:

• Engineer Officer Qualification, with First Class Chief Engineers Motor license from an IMO whitelist country; OR
• Degree in Marine Engineering/Naval Architecture/Mechanical Engineering or other related.
• Minimum of 2 years’ sailing experience as Chief Engineer onboard; OR
• Minimum of 1 year's experience as Technical Superintendent within the Maritime Industry ashore.
• Able to handle mixed vessels types (e.g dry cargo, containers, gas carriers, RF containers)
• Able to communicate in both English and Mandarin is preferred to communicate with the crewonboard and clients.

“If you have the drive for achievement, we’d love to hear from you. Please apply in strict confidence with your full resume and contact details.

Information collected will be kept confidential and used strictly for recruitment purpose only.”

• Create technical documents
• Maintain multiple versions, variants
• Documents include IC Specifications, Application notes, user manuals
• Diploma/Degree in Computer/Electrical/Electronic Engineering
• Must have good command on written English
• Drawing skills to create block diagrams, waveform
• 1-2 years of experience in technical Documentation will be an advantage

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

About your role

• Serve as the technical expert and trusted advisor to manufacturing customers around automation solutions.
• By applying subject matter expertise, you build and maintain client relationships and solve their complex automation challenges.
• Collaborate with sales and technical team members to help identify, progress, and close commercial opportunities.
• Develop sales processes and build relationships with stakeholders to design and offer solution that solve customer pain points.
• Attractive commissions will be awarded.
  

Requirements

• Experience in robotic engineering and simulation work is preferred.
• Strong understanding of robotics and automation related products.
• High willingness to learn and take ownership.
• Ability to effectively communicate product value propositions, negotiate commercial contracts, and close deals.
• Comfortable with travelling internationally for work.
• Ability to take initiative and self-manage to achieve key objectives and company KPIs.

Job Description:

• Responsible for the execution of the Static Equipment Integrity Coordination scope of work, focusing in the Integrity Management Process of the equipment controlled by the MODEC's Own Service of Equipment Inspection,predictive maintenance, process performance and condition monitoring, quality assurance and quality control of subcontractors, and development and improvement of preventive and predictive maintenance plans, in order to ensure and maximize assets reliability, availability, maintainability, safety and integrity (RAMSI), as well as contributing to the Operations procedures and results achievement, established for the business.
• Support the MdB's corporate annual budget planning (expenses and investments), by providing information based on previous experiences, technical knowledge, and best practices of the market.
• Contribute to continuous improvement of IMS by following up and filling in projects status and updating and monitoring the implementation of IMS Documents under Static Equipment Integrity Coordination and maintaining the equipment master list updated.
• Participate in risk analysis workshops and safety reviews to contribute with Integrity engineering expertise and support the Operations team.
• Contribute to the attendance to the maintenance and equipment inspection policies, regarding to the Reliability Engineering, by applying the guidelines and lessons learned from the Technical management.
• Monitor process safety barriers' KPIs and provide technical recommendation, when necessary, to ensure the
• effectiveness of process safety barriers to maintain the facility's operation within ALARP level. Furthermore, it is extremely important to ensure the verification of the safety devices as safety valves, rupture discs, flare, etc., based on written procedures, in order to ensure safe condition for operation of equipment.
• Elaborate technical recommendations or actions plans to meet the Operations needs and feedbacks of the Technical management, Fleet maintenance support, subcontractors, and Operations areas.
• Contribute to effective planning and monitoring of shutdown and decommissioning (equipment and offshore unit) plans by defining the shutdown scope (equipment list, NDT exam, tests, measurements, replacements, repairs, or modifications to be carried out) related to controlled equipment, through legal compliance and integrity evaluation.
• Organize the activities related to NR 13 / SPIE together with the Equipment Inspectors from the Offshore Units, by including files and documentation, such as official books, calibration certificates, internal and external inspections, inspection reports, hydro-test and carrying out audit in the manufacturers.
• Ensure the proper register of all Pressure Vessels, PSV, Boilers and all others static equipment by developing datasheets and inspections reports and filling in the integrity management software (SGI) with reliable and updated data on this equipment.
• Contribute to fleet performance improvement by constantly cooperating with other Tiers and Modec entities, to absorb and apply all lessons learnt from other Unit Phases (Commissioning, Operation, Maintenance, Decommissioning) for the new vessels in construction, as well as provide new lessons learnt and improvement opportunities discovered during the Pre-Ops project.
• Sporadic follow ups in the shipyard during the Construction Phase and visits to vendors' factories might be required for these activities.

Qualifications & Experience:

• Bachelor's degree of Mechanical or Naval Engineering is required for SPIE.
• CREA is required. Certification as Welding Inspector (SNQC) IS-N2 is a competitive edge.
• Engineer JR: 2 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.
• Engineer Full: minimum 4 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Job Scope

• Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.
• Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.
• Generate BOM and RFQ document.
• Communicate with contractor for automation equipment panel fabrication.
• Prepare factory acceptance test document for automation equipment panel.
• Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.
• Provide support on site installation.
• Updating of Circuit diagram, Control device and Equipment Installation layout.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

RAYMOND NG JUN HAN | EA Personnel No.: R1657009

Datacenter Operations Engineer

The Leaseweb APAC team is growing quickly and looking for talented individuals to join us. Our Data center Operations Team is involved in the daily management of our current 6 data center facilities in the APAC region (Singapore, Japan, Hong Kong and Australia) and we are about to open 3 more data center location in Singapore, Japan and Australia later this year. You will be responsible for the configuration and installation of the servers during the provisioning process in our data center in Singapore, and other data centers in the region as needed. You will also be assisting customers with the installation of network equipment in more complex designs.

Key responsibilities:

• Installation, configuration, relocation, and removal of server equipment at the data center
• The assistance of customers within data centers (for customers with their own racks/servers)
• Upgrade/downgrade of server equipment (memory/hard disks/etc.)
• Replacement of hardware and handling of all relevant administrative matters.
• Testing servers and server equipment in accordance with standards
• Work with remote hands partners within the APAC region to support installation and/or adjustment of servers.

Requirements:

• At least one year of hands-on experience working in a data center with servers
• Knowledge of various operating systems, especially Linux
• Knowledge of Hardware (Servers, Switches, KVM, Hard Drives, Memory etc.)
• Basic network knowledge (adjusting DNS/IP/Netmask/gateway/etc.)
• Certificate or degree in Computer Science or similar discipline preferably with an emphasis in Technology
• Professional and effective communication in English

What we offer:

• Competitive salary
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• A great working environment in a dynamic, international, fast-growing organization

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at the life at Leaseweb. For questions, please reach out to Danisha Ardilla - Talent Acquisition Specialist, at: [email protected]

Recruitment agency? Thank you for your interest, but we are sourcing all our candidates directly. We appreciate you trying anyway but please keep in mind that any unsolicited profiles you send us will be treated as direct applications.

Position Overview:

To ensure nominated vessels are maintained & operated in line with Statutory Instruments, Company Policy & Safety Management System, Industry Best Practice & Vessel Owners Requirements.

Key Responsibilities & Accountabilities:

1. Act as the single point of accountability, monitoring all onboard activities and providing Technical & Operational Guidance and Support to the Master & crew of nominated vessels as required.
2. Ensure Safety & Environmental Compliance with respect to Statutory Regulations, Company Policy & Safety Management System, Industry Best Practice, and owner’s requirements are given the highest priority by both the shore and vessels staff.
3. Monitor and support all operations onboard nominated vessels closely, provide assurance that they are undertaken in full Compliance with Statutory Regulations, Company Policy & Safety Management System, Industry Best Practice, and owner’s requirements, whilst meeting efficiency & economic expectations.
4. Ensure compliance with Wallem’s SMS, flag and class’s rules and regulations, state requirements, TMSA and other vetting agencies’ conformance.
5. Support Operations superintendent and work together for common objective to operate vessels as required under the SMS and within the purview of Shipman Agreement.
6. Responsible for all budgetary expenditure on nominated vessels, provide timely reports & analysis to Fleet Manager(s) and Owner(s) as required.
7. Responsible for operating vessels within KPIs set out by Wallem’s SMS while maintaining priority on safety and pollution prevention. Technical Superintendent works with other departments of Wallem for meeting commercial expectations and maintaining vessels sea-worthy.
8. Act as Client/Owners point of contact ensuring the highest level of customer Service & Satisfaction are maintained whilst also protecting the Wallem brand and our employees from risk.
9. Provide Direction, Coaching, Guidance, Mentoring and Evaluation of senior sea staff to ensure that all operations are carried out safely & successfully whilst also enabling senior sea staff with their individual career progression & development.
10. Monitor and maintain a thorough knowledge of current Technical Superintendents Work Instructions which maybe subject to review and revision from time to time, whilst completing all Tasks detailed in the Technical Superintendents Work Instructions for nominated vessels.
11. Monitor and optimize vessels and seafarers’ performance. Collaborates with other stakeholders to ensure that vessels and seafarers have adequate resources to perform.
12. Review, write and provide feedback on development area of seafarers, work-performance during specific contract, while setting clear goals and targets.
13. Act as part of the Shore base Emergency Response team as required.
14. Complete any additional tasks as reasonably requested by the Fleet Manager.

Requirements:

• Engineer Officer Qualification, with First Class Chief Engineers Motor license from an IMO whitelist country; OR
• Degree in Marine Engineering/Naval Architecture/Mechanical Engineering or other related.
• Minimum of 2 years’ sailing experience as Chief Engineer onboard; OR
• Minimum of 3 year's experience as Technical Superintendent within the Maritime Industry ashore.
• Able to handle mixed vessels types (e.g dry cargo, containers, gas carriers, RF containers)

“If you have the drive for achievement, we’d love to hear from you. Please apply in strict confidence with your full resume and contact details.

Information collected will be kept confidential and used strictly for recruitment purpose only.”

As a 3D Graphics Engineer Intern, you will be developing graphics components and applications for our products. In this role, you will work closely with UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Analyse & optimise 3D rendering pipelines.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to mobile and web platforms end products.

What do we expect

• Pursuing BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games/CV/Robotics.
• Proficiency in C++11 and above, or comparable languages.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Familiar with OpenGL / Vulkan / Metal.
• Solid linear algebra knowledge.
• Experience in developing for and integrating third party software on mobile and web tech stacks.
• Familiar with uitilizing machine learning algorithms for vision problems.
• Understanding of 2D/3D graphics pipeline and GPU programming.
• Experience with Windows, Linux platform, MacOS and iOS.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

About NUS IT

NUS Information Technology is the cornerstone to providing reliable, high-performance and secure IT solutions and effective IT governance for the campus. Here at NUS IT, we aim to transform NUS into a borderless computing community providing knowledge at its fingertips by enhancing the use of effective applications and services for teaching and learning.

We drive a culture that is forward-looking. With a strong passion for IT, our people are always striving to improve, push boundaries and innovate with a "can-do" attitude. We embrace collaboration, open communication and knowledge sharing. If you see yourself thriving in a dynamic environment and breaking new grounds with innovative ideas, you will find yourself at home in NUS IT.

As part of our team, you can look forward an empowered work environment that allows you to take charge of your own career path. We provide competitive remuneration as well as flexible work arrangements to enable your growth and development. We pride ourselves on our diverse workforce and are committed to transforming NUS into a leading global University shaping the future.

https://nusit.nus.edu.sg/

Job Description

You will be part of the End-User support team that is responsible to manage the day-to-day support for faculties, schools and departments. You will work across a broad range of technologies and liaise across multiple areas of the business to support incidents, problems and requests and be responsible for answering IT requests via phone, email and IT Ticketing System.

Duties and Responsibilities

• Supervise and manage a team of IT desktop support engineers to provide effective and timely IT desktop support, advice, guidance and timely problem resolution to achieve desired operational outcomes.
• Manage day-to-day work activities of a team, including rostering, customer experience, SLA and prioritising and allocating service tickets.
• Provide level 1.5 technical support and advice to users on EUD related issues or queries.
• Provide effective and timely day-to-day End-User device support, advice, guidance and diagnosis, and timely problem resolution.
• Maintain PCs/laptops, mobile devices, IP phone systems, printers and peripherals, etc.
• Support the use of End-User devices such as PC, laptops, tablets and mobile devices running on MS Windows, Linux, Mac OS, iOS, Android, etc.
• Support the use of IT applications such as O365, Faculty software and utility applications e.g., Adobe, Zip, etc.
• Provide technical consultation and advice to users on End-User devices.
• Work closely with technical teams to provide technical solutions.
• Assist IT Business Partner with miscellaneous administrative and management duties.

Qualifications

• Diploma in Computer Science / Information Technology / Software Engineering or equivalent.
• Minimum 5 years of working experience with 2 – 3 years of team lead experience in managing and supervising a team.
• Good knowledge on basic networks, security, printers, desktops/ laptops/mobile devices, endpoint security and imaging.
• Good experience in troubleshooting MS Windows Operating Systems, Linux, Mac OS, iOS, Android and vulnerability resolutions
• Good customer service, communications and problem-solving skills.
• Knowledge in ITIL processes will be an advantage
• Good communication skills.

Locations: Changi

Requirements:

• Registered as a Resident Technical Officer with BCA/IES/ACES.
• At least 6 yrs experience in A&A works (healthcare institutions.)
• Able to work after working hours if required by the client and can take time off accordingly.

Responsibilities:

• RTO shall supervise the construction related works and ensure that the works are carried out in accordance with the project specifications.
• RTO shall possess adequate knowledge and experience to carry out supervision and inspection of the construction works including any off-site manufacturing as instructed by client
• RTO shall review all authority drawings for any discrepancies and missing details and to highlight findings to client.
• RTO shall ensure that contractors/ sub-contractors carry out their works in compliance with Codes of Practices, regulations and requirements of building authorities and government agencies.
• RTO shall conduct progressive inspections to ensure that works are carried out complies with quality standards and requirements.
• RTO shall monitor progress of the works on site and report delays to client immediately.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

To support Finance Lead in the payment workstream, to review and approve payment transactions for the College of Design & Engineering and providing advisory support and ensuring compliance with University’s Financial Policies and Procedures.

Duties & Responsibilities

• Counter-check invoices and Request for Payments (RFP)
• Approve the invoices and RFPs in the system
• Provide advisory on payment policies and procedures
• Other administrative tasks assigned

Qualifications

• O-level or Polytechnic Diploma in any field;
• Preferably with 3-5 years of relevant working experience;
• Meticulous with great attention to details
• A good team player with positive attitude;
• Customer centric mindset and Good communications skill;
• Familiar with MS Office applications;
• Good written and spoken English

Position Overview

We are looking for a motivated Developer Relations engineer to work alongside our engineers with our community at Autodesk. This is a unique opportunity for a senior engineer / senior software developer who wishes to gain hands-on experience in a dynamic, high-tech environment and enjoys supporting developer teams. The ideal candidate has solid development experience in Software Delivery domain and additionally likes writing, public speaking, and brings a good-natured and outgoing personality. As a Developer Relation engineer, you will be working on Connected Delivery domain with our engineers, communicate with our developer community through required channels and help them resolve any issues they may have. You will support the community with tutorials, updated documentations, trouble shooting and helpful tips.

What you might like

• A friendly working environment in a professional setting
• Evolving tasks with the option to learn and grow and take over much more responsibilities as fits your skillset and personal goals
• Opportunity to collaborate with the brightest minds in the company and help improve the products and components that you are responsible for
• Adequate salary; hybrid work model; employee stock options as applicable

Responsibilities

• Ensure that our developer community is taken good care of
• Represent Connected Delivery towards the community and the community towards the internal team
• Monitor and respond to community questions in a nice, helpful and swift manner and help update FAQs, threads, documentations etc. accordingly
• Help validate fixed issues and confirm resolution of the same
• Help create and publish tutorials and articles for the community to support them in the best possible way
• Document and analyze the community feedback in a structured way and suggest measures to best serve our community
• Hold training sessions with related community members as applicable

Minimum Qualifications

• Love working with people and enjoy being helpful
• Have a strong engineering background and are a developer at heart
• Have 10+ years of relevant software development experience
• Enjoy and have experience with writing blogs and / or community management and / or teaching
• Have excellent communication skills and enjoy explaining complex technical solutions in a way that most people would understand it
• Have excellent English speaking and writing skills
• are very open-minded and love to learn new things
• Have a calm mindset and are good at context switching
• Have earned a bachelor’s degree or more

Preferred Qualifications

• Have contributed to open-source software
• Have experience working at a startup and / or as a Community Manager and or Developer Relations and / or similar role
• Have completed a Master degree related to Computer Science / Engineering or Business Administration

#LI-PW1

Job Opportunity: Sales & Customer Support Assistant (Entry-Level Role)
Location: Singapore | Join Our Growing Team!

Are you ready to kickstart your career in the food industry with a vibrant and expanding food manufacturing company? We’re looking for a motivated and positive individual to join our team as a Sales & Customer Support Assistant. This role is ideal for those seeking hands-on experience in a dynamic environment, helping customers and supporting our sales team.

What You'll Do:

• Handle daily sales order processing, including taking orders via phone.
• Assist with all incoming inquiries (phone, email, fax, and walk-ins).
• Manage sales orders, prepare delivery orders, and issue invoices.
• Help prepare and label packing materials.
• Address customer complaints with patience and professionalism.
• Support your team with additional tasks as assigned.

What We’re Looking For:

• Positive Attitude: A friendly and proactive approach to work.
• Language Skills: Ability to communicate in Mandarin (for effective communication with Mandarin-speaking customers).
• Minimum Education: PSLE or equivalent.

Why Join Us?

• Gain Experience: Build valuable skills in sales, customer service, and logistics.
• Career Growth: Be part of an expanding company with future growth opportunities.
• Work-Life Balance: 6-day work week with a scheduled off day.

If you're enthusiastic about learning, can speak Mandarin, and are eager to work in a fast-paced food manufacturing environment, we want to hear from you!

Apply Today and Start Your Journey with Us!

Roles and Responsibilities:-

• Uplift the existing Administrative, Human Resources, Finance and/or Logistics aspect of the company.
• Assist in Human Resource-related responsibilities, such as Time & Attendance, Claims, Employee Records, On-boarding and other day-to-day tasks assigned by the Directors.
• Assist in Accounts Receivable duties such as maintaining and following up for the Outstanding Payment list, Invoice creation and liaising with the Sales Team to obtain Invoice payment from customers.
• Maintain the structure of accurate records of inventory and warranty of our product offerings, both hardware and software. Maintain company's organization chart and admin-related documentations and records, such as preparing letter of offer, confirmation, increment & promotion, etc.
• Appreciate the initiative to continuously improve the company’s standard operation procedures (S.O.P), system and structure as well as the welfare of the company.
• Periodically assist Sales Team on administrative tasks (Sales Pipeline, Commission calculation, etc).

Requirement:-

• Diploma / Degree in Human Resources, Business Administration or equivalent
• Minimum 1 year experience
• Good understanding of the HR practices including Employment Act
• Good organisational skills with ability to carry out analytical and coordination work
• Good working attitude & self-driven
• Able to work in a fast – paced environment
• Good communication skills (written & verbal) and able to interact with people at all levels
• Proficient Microsoft Office applications
• Able to work independently in a fast pace environment.
• 5 day work week

Personnel to be deployed at the following hours:

• Mondays to Thursdays: 8am to 5:30pm, inclusive of 1hr lunch break

• Fridays: 8:30am to 5:30pm, inclusive of 1hr lunch break

• Service maybe required on Saturdays, Sundays and gazetted public holidays

The Services required are set out as follows:

The roles and responsibilities of the Operations Executive will be as follows:

(a) Assist Operations Manager to manage daily operations on site.

(b) Assist Operations Manager to plan manpower for operations.

(c) Assist Operations Manager in minor repair work.

(d) Identify faults to ensure school is safe and building is properly maintained.

(e) To accompany, monitor and supervise contractors when in school for repairs/maintenance

(f) Security control at the school foyer in the even of event.

(g) Support all school operations and OM/AM and School Leaders

Description

This job position is suitable for individuals who are constant learners, problem solvers and multi-taskers. Candidates who thrive in a fast-paced environment, steps up to face challenges, and are able to deliver results, are welcome to apply. We are looking for candidates who are interested in doing Implementation and Operation of Infrastructure in Cloud.

Responsibilities

• Responsible to deploy and Maintaining Server (Windows or Linux) deployed in Cloud Infrastructure
• Ensure that all OS, software and cloud services are up to date to support the cloud infrastructure
• Provide support related to customer issue with the Cloud Infrastructure.
• Work closely with IT security to monitor privacy and develop incident-response procedures

Requirements

• Bachelor’s degree in computer science, Information Technology, or related field.
• Must have minimum of 4 years' experience working with Linux and architecture.
• Proven experience in:
  Building and managing both Windows and Linux servers in cloud environments.
  Strong scripting and automation skills (e.g., Python, Bash and PowerShell).
• Minimum 2 years of experience with cloud providers (AWS or Google Cloud Platform).
• Must have Linux/Unix system administration experience (e.g. system troubleshooting, install software, modify operating system and application configuration).
• Require networking knowledge for troubleshooting network routing and firewall issues.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and collaboration skills.
• Configure Agency’s existing Log Management System(s) to forward logs to GCSOC
• Set up LMS(s) at Agency (if they don’t have), either on physical server or virtual machine
• Only Singaporean / SPR that may apply

By submitting your resume/CV, you consent and agree to allow the information provided to be used and processed by or on behalf of Xtremax Pte Ltd for purposes related to your registration of interest in current or future employment with us and for the processing of your application for employment.

You also represent to us that you have obtained the consent of your referees when you disclose to us their personal data for the purpose of conducting reference checks.

The personal data held by us relating to your application will be kept strictly confidential and in accordance with the PDPA. You may also refer to our Privacy Policy for more details here: https://www.xtremax.com/privacy-policy

We regret to inform you that should you not consent to providing the necessary data required for us to process your application, your application will be considered void.

Job Description:

• Plan/Design of evaluation/bench test board PCB
• Guide ATE test engineer on test method of the IC
• Test Devices in lab for correlation with ATE
• Plan and test Device Qualification runs (HTOL, ESD, LU) with external test house

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic) or equivalent.
• At least 3 Year(s) of working experience in application/ validation

Job Description

You will help to design and develop Guidance, Navigation and Control (GNC) systems and algorithms for our drone systems and be part of a tight-knit team that provides safe, reliable drone systems and quality services to our distinguished customers in Singapore and around the region.

Your responsibilities will include:
• Design, develop and modify guidance, navigation, and flight control systems and algorithms for our unmanned aircraft systems.
• Develop and modify 6-DOF and hardware-in-the-loop (HIL) simulation environments. • Select, test, evaluate and integrate new sensors or navigation systems onto our drone systems.
• Write, modify, and test firmware and flight code that runs on the flight control computers of our drone systems (in C or C++).
• Analyze flight data to verify flight performance and to help to troubleshoot issues that are found during the flights of our drone systems.
• Generate documentation on the specifications, design, test procedures and test results of the GNC systems and algorithms that were developed.
• Participate in design and code reviews.
• Support ground and flight test activities.
• Work in a collaborative manner with staff in other engineering (e.g. system, software, safety, flight test, etc.) and business groups.

Requirements

• Bachelor’s/ Master’s Degree in Mechanical, Electrical, Aerospace, Controls, Mechatronics Engineering, or a field related to GNC.
• Good to have 3+ years of industry or other relevant experience in GNC
• Strong background in system modelling, system identification, parameter estimation, frequency response analysis, classical and modern control theory.
• Experience in system modelling and control, analysis, and simulation in aircraft applications.

• Experience in developing model-based design and analyses using MATLAB/Simulink.
• Knowledge in inertial and other type of sensors for navigation (e.g. accelerometers, gyroscopes, magnetometers, GNSS receivers, pressure sensors, ranging sensors, etc.)
• Knowledge in Kalman filtering, digital signal processing and sensor data fusion.
• Proficient in C/C++ programming language.
• Proficient in software and development tools such as Linux, ROS and Git.

• Atleast complted Bechelor of Civl Engineer or equilant.
• Preparing site reports and completing other site documentation
• Conducting preliminary site inspections of potential construction sites to determine essential tasks
• Developing labor and material cost estimates for a project
• Advising construction team on operational enhancements to lower costs and enhance efficiency
• Ensuring the construction team follows health and safety standards
• Resolving technical difficulties that occur during a construction project
• Connecting and negotiating with clients, subcontractors and other professional staff

Job Description:

1. Project Management:

• Lead and manage technical projects from inception to completion.

• Create project plans, timelines, and allocate resources.

• Ensure project milestones are achieved on time and within budget.

• Conduct regular project reviews and report on project progress to stakeholders.

2. Team Leadership:

• Supervise, mentor, and guide a team of engineers, developers, or IT professionals.

• Set goals, conduct performance evaluations, and provide feedback to team members.

• Foster a positive work environment and encourage continuous learning and development within the team.

3. Technical Strategy & Execution:

• Define and implement the technical strategy that aligns with the company’s goals.

• Make key technical decisions, such as technology stack selection, system architecture, and processes.

• Stay updated with the latest technological advancements and assess their impact on current operations.

4. Collaboration & Communication:

• Work closely with cross-functional teams (e.g., Product, Sales, Marketing, and Operations) to ensure alignment on business goals.

• Communicate technical concepts and strategies clearly to both technical and non-technical stakeholders.

• Ensure that customer needs are understood and translated into technical solutions.

5. Quality Assurance:

• Establish and maintain high standards for software quality and technical performance.

• Implement and monitor key performance indicators (KPIs) to measure project success.

• Ensure adherence to security protocols, data privacy, and compliance standards.

6. Vendor and Resource Management:

• Manage relationships with external vendors, contractors, and consultants.

• Oversee procurement of software, hardware, and other technical resources.

• Ensure cost-effective and efficient utilization of technology resources.

7. Problem Solving & Risk Management:

• Identify technical challenges and propose solutions to overcome them.

• Manage risks and develop contingency plans to ensure smooth project execution.

Job Requirements:

1. Education:

• Bachelor’s degree in Computer Science, Information Technology, Engineering, or a related field.

• Master’s degree

2. Experience:

• 10+ years of experience in a technical role (e.g., software engineer, systems architect).

• 5+ years of experience in a management or leadership position.

• Proven experience in managing technical teams and complex projects.

3. Technical Skills:

• Deep knowledge of relevant technologies, such as programming languages (e.g., Python, Java), frameworks, cloud services (AWS, Azure), and databases.

• Strong understanding of system architecture, software development lifecycle (SDLC), and agile methodologies.

• Familiarity with DevOps practices and tools (CI/CD pipelines, version control).

4. Leadership & Management Skills:

• Strong leadership abilities with a proven ability to inspire and motivate a team.

• Excellent problem-solving skills and the ability to make sound decisions under pressure.

• Ability to manage multiple priorities and navigate tight deadlines.

5. Soft Skills:

• Exceptional communication and interpersonal skills.

• Strong organizational skills and attention to detail.

• Ability to collaborate effectively with both technical and non-technical stakeholders.

6. Certifications (Optional but Preferred):

• Project Management Professional (PMP) certification.

• Agile or Scrum certifications.

• Relevant technical certifications (AWS Certified Solutions Architect, etc.).

Key Performance Indicators (KPIs):

• Project completion rate and on-time delivery.

• Team performance and retention.

• Quality of technical solutions (bug rates, system uptime).

• Stakeholder satisfaction.

Department Overview

Aristos focus on creating customised state-of-the-art automation solutions for all possible industries. By utilising Akribis Systems' direct drive linear and rotary system, we are able to achieve high speed and high precision assembly, inspection or testing solution for our customer.

Roles & Responsibilities

- Drafting of electrical schematic diagram, single line diagram, cable assembly

- Assist cable routing on machine & control box

- Setup of motion control system, machine vision system, signal and control devices, used in motion control products and automation equipment

- Work with engineer to formulate work instructions

- Able to take on additional tasks or responsibilities as assigned by Superiors

- Assist engineers in designing, testing, and evaluating electrical/mechanical systems and components

- Collaborate with multidisciplinary teams to ensure project success

- Perform technical calculations and analysis under supervision

- Troubleshoot and resolve engineering issues

SPH Media’s mission is to be the trusted source of news on Singapore and Asia, to represent the communities that make up Singapore, and to connect them to the world.

It has several business segments in the media industry, including the publishing of newspapers, magazines, and books in both print and digital editions. It also owns and operates other businesses including radio stations and outdoor media.

In this role, you can expect to:

• Design and implement cloud infrastructure to support both internal and external facing services and applications across multiple cloud service providers.
• Define and implement best practices around Cloud Service Provider configurations and security.
• Define and implement best practices around infrastructure and application monitoring, and responding to incidents.
• Work with automation extensively to manage infrastructure on the cloud using Infrastructure as Code tools such as Terraform and to automate internal processes such as CI/CD pipelines.
• Work with cloud native tools and technologies such as Kubernetes, containers, and Terraform among others.
• Contribute to both internal and external open source projects.

You may be a good fit if:

• You hold a degree in Computer Science or Information Systems.
• You have at least 3-5 years of practitioner experience in DevOps/SRE and cloud technologies.
• You have deep knowledge of cloud service providers and best practices around implementation and configuration, preferably managing AWS.
• You have experience with and are passionate about Infrastructure as Code, automation, and developing solutions that help developers move quickly and safely.
• You are proficient in cloud-native technology and tools, including Kubernetes, containers, and Terraform.
• You are confident, proactive, organised, with strong communication ability and a willingness to work with a multidisciplinary team.
• You are prepared to go outside your comfort zone with a strong growth mind-set.
• You have prior experience with software engineering, including the ability to code and test in one or more programming languages, and debugging software.

Responsibilities:

1. Perform system-level testing, including unit testing, integration testing, and regression testing for communication, positioning, and radar systems.

2. Design and execute detailed test plans to ensure the reliability and performance of embedded systems.

3. Develop and maintain automated testing scripts using Python or other relevant tools.

4. Collaborate with R&D engineers to identify and resolve bugs.

5. Utilize diagnostic tools to perform hardware-in-the-loop (HIL) testing.

6. Generate comprehensive reports based on test results, providing insights for product enhancement.

7. Contribute to the continuous improvement of testing frameworks and methodologies.

Requirements:

1. Diploma degree or above in software engineering, computer science, electronics, telecommunication or a related field.

2. Proficiency in Python for scripting automated tests.

3. Knowledge of network equipment, communication protocols, and embedded systems.

4. Strong analytical skills, attention to detail, and problem-solving capabilities.

5. Effective communication skills and a proactive, collaborative mindset.

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

• Recipe creation and optimisation for new R&D applications requirement.
• Preventive and corrective maintenance planning cum execution and vendor management.
• To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up
• Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).
• To set-up appropriate process and product control plan and out of control action plans (OCAP)
• Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

• Diploma/Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering
• Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)
• Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)
• Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)