• managing construction projects
• overseeing site work
• ensuring projects meet agreed specifications, budgets or timescales
• liaising with clients, main contractors and other professional staff
• providing technical advice; problem solving
• setting out sites and organising facilities
• supervising contracted staff
• checking and preparing site reports, designs and drawings
• ensuring site safety.

Position Summary:

Responsible for supporting product transfer, instrument manufacturing, troubleshooting, failure analysis, quality improvement, process enhancement, cost reduction, engineering evaluation and system improvement.

Position Responsibilities:

• Support and drive activities to ensure successful product transfer into manufacturing.
• Drive troubleshooting, failure analysis, root cause analysis, issues closure and corrective action processes as required.
• Perform instrument setup, calibration and final system integration test.
• Establish and maintain databases of instrument failures and defects.
• Perform data trending analysis, construct and execute design of experiments to address yield and quality issues.
• Drive and implement process improvements and product sustaining activities to meet the production goals.
• Drive maintenance and improvement activities on test fixtures and equipment.
• Drive and implement cost reduction activities by perform engineering evaluation to qualify new or improved materials, processes and products.
• Apply various analysis techniques, such as FMEA and statistical analysis to optimize product quality and minimize cost, providing all calculations, performance data, and drawings required on new and existing products.
• Manage and coordinate Engineering Change Order implementation activities including scrap analysis, material disposition, update work instructions and test requirement changes.
• Documentation responsibilities include, but not limited to, generating detailed engineering drawings, Bill of Materials, test reports, assembly procedures and design validation plans.
• Work closely with contract manufacturing partners and key suppliers to ensure smooth transition of quality products from development into manufacturing.
• Provide guidance and supervision to junior staff.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Bachelor’s degree or Master in Mechanical or Electro-mechanical Engineering.
• Able to differentiate and identify components (using visual) of different colours.

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Typically requires a minimum of 5 years of related experience with a Bachelor’s degree; or 3 years and a Master’s degree; or a PhD without experience; or equivalent work experience.
• 5+ years of engineering experience in mechanical or electro-mechanical based products for commercial and industrial markets.
• Good working knowledge and experience in mechanism design and electro-mechanical systems.
• Strong organizational skills, attention to detail and accuracy, and the ability to work independently in a team environment are essential.
• Solid knowledge of GD&T, plastic & sheet metal tooling, casting, mechanism, stress analysis, mechanics, machining and standard manufacturing processes.
• Candidate must be able to effectively lead teams, interface well with the manufacturing and service organization, and has a proven track record of transferring products to manufacturing.
• Must possess good analytical and troubleshooting skills.
• Proficient in engineering tools such as, statistical analysis, design of experiments, product and process capability analysis.
• Proficient in Solidworks or 3D CAD tools.
• Good working knowledge of BOM (Bill-Of-Material) structuring fundamentals and have the ability to create ECOs (Engineering Change Order) and Deviations.
• Demonstrated use and understanding of MRP systems, Product Data Management systems and Change Control processes. SAP & PLM experience will be added advantage.
• Experience with FDA regulated medical device product development preferred.
• Product development experience in the life sciences, biotech, biomedical, nanotechnology or semiconductor industries preferred.

Responsibilities

• Monitor all project activities in relation to the respective project work plans and take corrective action, when necessary, to ensure the timely and cost-effective delivery of project outputs.
• Supervise the on-site team, ensuring the design and build concepts are being followed.
• Ensure proper maintenance and servicing schedule is set out for the infrastructure.
• Work with the project team to foresee and avoid, when possible, any obstacles that may present themselves during the construction or planning phase.
• Work in line with health and safety guidelines at all times.
• Provide project reports to Project Manager.

Requirements

• Bachelor’s degree or above in Civil Engineering or related field
• A minimum of 2 years' experience working as a senior civil engineer on similar projects.
• Experience in Bridge Project with erection works using specific Equipment (Launching Gantry, Lifting Frame) and Post-Tensioning system works
• Excellent computer skills, previous experience with project management software
• Strong analytical skills, with keen attention to detail
• Strong communication skills, both written and verbal
• Able to work to agreed deadlines and timescales.
• Demonstrated knowledge of health and safety guidelines
• Good problem-solving abilities
• Ability to prioritize own time and workload.

Role & Responsibilities:

• To perform monthly maintenance & servicing of Fire Protection System
• Perform equipment installation and attend to equipment breakdown / troubleshooting at customers’ site
• Perform preventive maintenance and repair
• Supervise and manage site work, so-ordinate / meeting with project team
• Prepare maintenance report, breakdown report and other reports as required
• Handle Fire Alarm System (FAS) schedule service and maintenance activities for various facilities

Job Requirements:

• Diploma / Degree in Engineering / Construction or equivalent
• M & E Experience preferred
• At least 2 years of working experience
• Experience in the Construction industry
• Proficient in MS Office and Auto-CAD
• Excellent Communication, Leadership, Interpersonal and Problem-solving
• Ability to multitask, stay organized, work under pressure and manage deadlines
• Ability to work effectively in cross-functional and collaborative teams

Main Tasks by Project Technical Engineer are

• Study of general programme, detail sequence of works, detail methodology and kinematics of construction for both tender and project phases.
• Definition of required temporary works, material and equipment for each identified task

Detailing for each temporary works and Erection Equipments:

• Main Concept & Functionality Design brief and design basis
• Checking of interfaces
• Coordination with Structural Dpt for detail design (and/or detail design) General technical support of on-going projects (Method Statement, detail sequence of works, special Temporary Works methodology)

Job Requirements

Software:

• Good command on MS Office, especially Excel
• Good command on AUTOCAD is a bonus
• Knowledge of SketchUp and Inventor are a (big) plus but not mandatory

• You are responsible to drive and manage the silicon Bump & package assembly suppliers, backend processes and solutions to achieve the aggressive TQRDCEB goals.
• You will work closely with package design & technology, test & product engg, production planning, quality engg & NPI teams, assembly/substrate suppliers to support new product & technology introduction activities by defining processes, monitoring systems, manage process improvements and changes.
• Provide day-to-day support to bump and assembly suppliers & internal planning, product and test engineering teams.
• Plan, drive & implement improvement activities for continual improvement, 2nd sourcing, cost reduction & customer satisfaction.

•Qualifications:

• PhD / Master / Degree in Mechanical / Electrical / Electronics Engineering with 7~12 years of relevant experience of managing advanced node silicon bumping, large body single & multi-chip (2.1/2.5/3D) package assembly, substrate & back-end suppliers and processes.
• Hands on experience in Product Life-Cycle Management - creating & maintaining Bill of Material structure, Process Documentation, Process Change Notification etc.
• Good team player, result oriented individual, experienced in project management, failure analysis tools, techniques and TQM. Good analytical, problem-solving skills. Flexible and agile.
• Sound knowledge of applicable industry standards, quality systems, regulations, knowledge of prevailing and emerging silicon package & substrate technologies, bumping and assembly processes, materials and equipment.
• Able to communicate with internal team members & external partners in various geographic locations and may required to travel from time to time at short notice.
• Experienced AutoCAD user. Knowledge of silicon & PCB fabrication, board assembly processes, are an added advantage

Requirements:

Cloud Services: Familiarity with AWS and Azure, such as AWS EC2, S3, MWAA/Airflow, AWS Lambda, Azure Blob Storage, Data Factory, Synapse Analytics, etc.

Machine Learning Platform:

• Familiarity with the architecture, features, and best practices of the Databricks platform, Databricks certification or relevant certifications are a plus.
• Proficiency in PySpark, Python, SQL, and other big data and machine learning technologies; practical project experience is preferred.
• Familiarity with concepts and methods related to data, such as data warehouses, data lakes, data pipelines, data quality, data security, and data governance.
• Understanding of machine learning principles, processes, and application scenarios; experience in training, deploying, automating, and managing machine learning models using Databricks is a plus.

Responsibilites:

• Offer comprehensive support for software, hardware, and networking on desktops and laptops and servers.
• Installation and upkeep of servers, PCs, associated software, networks, and IT devices.
• Address issues through phone support and on-site assistance.
• Troubleshoot networking and PC-related problems.
• Handle any ad hoc tasks as assigned
• Demonstrate the ability to work independently with a positive work ethic

Requirements:

• Min NITEC in any discipline
• Candidates with experience are preferred
• Able to start work immediately or short notice will be an advantage

· Relevant experience and knowledge in IT Infra Project Implementation and Operations.

· 6+ years’ relevant working experience in Financial Institutions.

· 1+ years’ experience or exposure to a Dev Ops project implementation.

· Technical skills in IT infrastructure (network, servers, database, application servers).

· Technical skills in Cloud Architecture/Service, DevOps platform.

· Strong technical and analytical skills.

· ITIL, IT Operations, Project Methodology & Tools (e.g. PMP/PRINCE2).

· Knowledge of Agile Methodology in Project Management.

• Identifying deficiencies in mechanical processes and developing improvements
• Designing and developing prototypes
• Analyzing and testing prototypes and each revision of a device
• Supervising the development of computer-aided design (CAD) project drawings from junior team members
• Developing, initiating and managing all phases of projects
• Preparing documentation of critical analysis and providing suggestions for correcting errors
• Collaborating with Project Managers for proper allocation and tracking of resources

Job Description & Requirements

• Report to Project Manager Scope of ACMV works in built environment, for project management.
• Understanding of ACMV engineering and contractual requirements.
• Work with design department to ensure compliance of engineering and safety requirement through design.
• Attend to contractual, cost, schedules, coordination, progress monitoring and project completion
• Preferred area of experiences:

1. Hospitals, Labs, Operating theatres, etc
2. Commercial or industrial building – Warehouses, factories , etc
3. Government projects
4. Data centers

Requirements

• Degree in Mechanical engineering, building services, project management or related, with project acmv experience preferred
• Degree in Sustainable Infrastructure may apply
• Safety certified, minimum Bizsafe level 2
• 3 years or more working experience in related fields preferred
• Good language capability (English) both in written and spoken
• Strong independence and leadership in teamwork environment.
• Fresh graduate may apply.
• Knowledge in BIM is added advantage
• Driver license is added advantage

Advantages / Remunerations

5 day work week.

Skillset conversion to BIM management as part of employment agenda, with training provided.

Fast progression once achieve BIM accreditation.

Progression-centric

AWS included

Variable Performance Bonus

Annual Incentive Trip

Further learning/education encouraged and sponsorships

Flexible working hours and Work from home accepted on top of physical attendance

Various Medical Benefits

As a Project Engineer, you will be responsible to execute project as planned cost and manage the order risk to satisfy customer and keep our promise.

Your Tasks as a Project Engineer will include the following:

• Review Project specification and requirement and highlighting the deviations between Sales technical offer and Project requirement to Contracts Manager/Engineer.

• Produce project design to meet project specification and technical offer, ensuring accurate information to meet project delivery.

• Liaise with internal/external customers and suppliers on technical matters

• Support Sales and Production on technical details.

• Responsible to arrange the factory acceptance test and Site acceptance test from customers

• Implement cost effective design and project management methods.

• Responsible for project dossier (document and drawing) preparation and submission.

Ideally you should have a diploma or above, Electrical Engineering background preferred and other engineering degree may apply. Fresh graduates are welcome to apply.

You must have strong sense of responsibility, teamwork and customer oriented. You must be able to speak, read and write English.

Salary : $3,300 - $4,000

Job Description:

• Oversee the coordination of day-to-day operation in the precast concrete activities
• Responsible for overall delivery of the project including planning, scheduling and execution
• Preparation of precast shop drawings for precast (PC) component monitors the progress of coordination and settlement of all discrepancies and issues relating to drawing between team members and clients' relevant representative
• Liaises with clients, suppliers and related authorities on project-related issues

Requirement:

• Degree in Civil Engineering recognized by PE Board Singapore
• 1-2 years of relevant experience
• Fresh graduated is welcome
• Good interpersonal skills to communicate with people of all levels
• Fluent in English and Chinese

Minimum experience of 4 to 6 Years

Installing and upgrading operating systems and computer software.

Helping on software or hardware upgrades.

Installing the Applications, Software’s on End user devices.

Installing and maintaining hardware and computer peripherals.

Exposure on SDM tools like SCCM, Tanium, End Point Central, KACE is added advantage.

Working on Banking Infrastructure Environment is an Additional Advantage.

Knowledge on Windows Server 2012/2016.

Providing basic training in computer operation and management.

Troubleshooting hardware, software issues, Network Connectivity issues. Responding to client support requests.

Job Description :-

• Answer enquiries to customers who call or text.
• Prepare and generate quotation, delivery order and invoice.
• Liaise and coordinate with clients to ensure timely delivery of goods.
• Assist in preparing and updating monthly sales data.
• Maintain good and traceable documentations.
• Any other ad-hoc admin duties as assigned

Requirement :-

• Minimum one year of sales support or admin experience.
• Skilled in basic office skills (excel,word).
• Ability to multi tasks and work under pressure.
• Required to speak Mandarin to liaise with Mandarin speaking customers.
• 5.5 work week
• Location : Yishun

Key Job Accountabilities (Actual daily deliverables):

On line support to machine troubleshooting.

• Immediate machine failure troubleshooting and repair, handler conversion & setup capabilities, setup yield monitoring, machine UPH accountabilities.

Responsible for Housekeeping, spares and other logistical property control.

• Consistent maintain on a system to improve setup tidiness, cleanness, proper tools inventory and ownership practice.

Ensure handler performance optimization.

• To ensure maximization of plunger / index arm, pick & place arm, speed control to reach maximum utilization & handler UPH efficiency as well as setup performance.

Ensure effective OCAP execution to sustain setup performance

• Ability to perform effective line OCAP, apply systematically socket & load board ocap execution.
• Ensure do escalation on tester repair after load board ocap done but problem persisted
• Ensure do escalation on handler if jam rate occurrence more than 6 times/day
• Do Socket Monitoring Dashboard monitoring on socket insertion lifespan reached limit & replace socket immediately
• Ensure setup time & unscheduled downtimes meet KPI based on Mean time to repair (MTTR) & Waiting time (WT)
• Do shift handover & communication with incoming/outgoing for outstanding issue follow up continuation

Required Experience and Qualifications (Required knowledge, skills and experience---however acquired):

• Requires knowledge in electronics and mechanical principles and through understanding of Final Testing ATE machine & technology is an advantage.
• Requires through knowledge of practical applications of concepts, procedures and guidelines to solve extremely complex problems
• Meticulous, independent, analytical and possess good / positive interpersonal skill. Must be a team player and hard working.
• Diploma in Electrical / Electronics / Mechatronics Engineering or its equivalent (E3)
• Minimum Higher NITEC / NITEC in Electrical / Electronics / Mechatronics Engineering or its equivalent with minimum of 5 years experience in Final Test Line Support operation is an advantage.

Job Description

• Responsible for schedules and forecasts of project development.
• Work with relevant personnel to rectify any electrical issues.
• Involve in design electrical works and make sure specifications are in line with Authority’s code of practice and requirement.
• Liaise, coordinate, and monitor project progress to ensure that schedule is on time as planned.
• Prepare method statement, risk assessment, construction drawing, catalogue submission, safe work procedure and all other documents as requested by site.
• Plan, manage and coordinate all site matters, ensuring compliance to Project specifications, regulations and schedules.
• Technical specification review and recommend appropriate resolution.
• Directs, supervises and train technicians on engineering activities on site to meet all project requirements.
• Actively use the right tools to collect and observe data to ensure good coordination with team activities and communicates project status through technical reports.
• Co-ordinate and attend meetings with the Structural, Architectural, and other M&E contractor, sub-contractor, consultant, and client’s representatives to resolve project related problems and issues.
• Monitor project cost activity to take actions on cost deviation.
• Attend and conduct of Factory Testing and Site Testing and Commissioning of system
• Collect all necessary accurate data and share information pertaining to project issues, budgets, and schedules in project meetings.

Job Requirements

• Strong technical ability to develop, optimize designs for analogue and digital mixed circuit design, microcontroller and embedded system for electro-mechanical system
• Proficient in 3D CAD software (such as Altium, SolidWorks Electrical etc), in creating electrical schematic, cabling drawings, PCBA
• Good knowledge and experience in performing simulation and analysis and technical review of PCBA and circuit design (analogue, digital, power)
• Good knowledge and hands-on experience for EMI/EMC. Knowledge on EE design standards (IEC, IPCs etc) for medical device is an added advantage
• An analytical problem solver to identify root cause, devise/evaluate/recommend optimal solutions to prevent future issues
• Natural ability to communicate technical information, and build interpersonal relation with the team members
• Able to work independently, self-motivated and organized with good teamwork skills

1. To coordinate and manage electrtical and ELV works

2. Ensure all electrical works are performed on time, within budget and in compliance with all necessary standards, code of practice and safety regulations

3. Responsible for the supervision and coordination of M&E services at project site

4. Understand Main Contract /Subcontract requirement

5. Monitor progress, quality of workmanship and compliance.

6. M&E coordination and liaison with Architectural Coordinators and Design Engineers.

Full Job Description

Job Description

• Responsible for schedules and forecasts of project development.
• Work with relevant personnel to rectify any electrical/mechanical issues.
• Involve in design works and make sure specifications are in line with Authority’s code of practice and requirement.
• Liaise, coordinate, and monitor project progress to ensure that schedule is on time as planned.
• Prepare method statement, risk assessment, construction drawing, catalogue submission, safe work procedure and all other documents as requested by site.
• Plan, manage and coordinate all site matters, ensuring compliance to Project specifications, regulations and schedules.
• Technical specification review and recommend appropriate resolution.
• Directs, supervises and train technicians on engineering activities on site to meet all project requirements.
• Actively use the right tools to collect and observe data to ensure good coordination with team activities and communicates project status through technical reports.
• Co-ordinate and attend meetings with the Structural, Architectural, and other M&E contractor, sub-contractor, consultant, and client’s representatives to resolve project related problems and issues.
• Monitor project cost activity to take actions on cost deviation.
• Attend and conduct of Factory Testing and Site Testing and Commissioning of system
• Collect all necessary accurate data and share information pertaining to project issues, budgets, and schedules in project meetings.
• Prepare progress report and project handover report.
• Execute other assigned tasks as delegated by immediate superior.

Job Requirements

• Bachelor’s degree/ Diploma in Electrical or Mechanical Engineering or related discipline
• 3 years of working experience in construction industry
• Knowledge for Mechanical, Pumping System, ACMV, CCTV, Electrical or Control System or SCADA system will be an added advantage

Job Descriptions:

• Establish customer orders through maintaining positive relationships and organizing customer visit schedules for both existing and potential clients.
• Foster robust business connections, generating new sales opportunities.
• Monitor market trends and predict sales volume to stay proactive in adapting strategies.
• Conduct impactful sales presentations to effectively persuade potential customers.
• Enhance customer dedication by providing professional after-sales support.
• Address complaints promptly, resolving issues to ensure customer satisfaction and protect the company's reputation.
• Negotiate agreements, monitor payments, and maintain comprehensive sales and data records.
• Regularly update and maintain reports for the management team.
• Undertake additional responsibilities as assigned on an ad-hoc basis.

Job Requirements:

• Possess a Professional Certificate, Diploma, or Bachelor’s Degree in Marine Engineering or a related field.
• Minimum of 1-2 years of experience in Sales, specifically with marine engines, heavy equipment, and cranes.
• Good communication skills.
• Exhibit excellent communication and presentation skills, coupled with the ability to build strong relationships.
• Showcase an aggressive passion for professional growth along with strong leadership qualities.
• Capable of working independently while maintaining a collaborative team spirit.
• Own a car and possess a valid class 3 license will be preferred

Job Description & Requirements

Job Description & Requirements

Responsibilities/Duties:

1. Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
2. Managing and planning the construction project.
3. Controlling the cost of the materials and labor.
4. Attend site meeting, inspection and monitoring of project progress.
5. Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
6. Monthly project status reports and change orders.
7. To manage the daily operation of the project execution.
8. Advising the workers on the construction process and addressing their concerns.
9. Obtaining the construction materials and verifying them.
10. Scheduling the construction work of the day.
11. Ensuring that the project starts on time and ends within the estimated duration

Job Specifications/Requirements:

1. Have prior 3 year working experience in construction industry (exp with Interior Work (Singapore) will be an advantage. )
2. Must possess good communication skills.
3. Relevant site experience.
4. Knowledge in Microsoft office (Excel, Word).
5. Have excellent problem solving skills
6. Good team player and customer-focused with excellent communication skills
7. Able to work independently with minimum supervision.
8. Able to work under pressure with high initiative.
9. Company benefits @ Yearly Performance Bonus @ Allowance @ Medical Leave @Annual Leave @ Transport Allowance or Company provide transport @ Singaporean and PR are Welcome

The Job

1. PLC & PC based programming for customized automation machines
2. Vision Camera Inspection System and related programming
3. Various testers (High Potential testers, Leak testers)
4. Electronic Camming to control servo motor driven motions
5. Sourcing and costing of related EE components

The Requirements

1. ŸDiploma/Degree in Electrical Engineering with at least 2-3 years’ relevant experience.
2. ŸRelated experience in design and development of customized automation machines.
3. Must be able to write application programs for PLC such as Omron, Allan Bradley control logix, Siemens S5, S7, Keyence, Beckhoff etc.)
4. PC based (visual basics, C++) familiar to apply both hardware and software for machine controls
5. Hands on, able to guide technicians on schematics, EE layout etc
6. Occasional Travelling required

Others

• Working location: Woodlands
• Working hours: Monday to Friday, 8.30am – 5.30pm

• Assist Project Manager on planning to ensure that materials, manpower, machineries, authorities approval and site conditions are ready before the work starts.
• Supervise work for the contract and ensure that it is done in compliance with the contract specification including confirming and verifying that the work is done.
• Manage the project to ensure that work is carried out in a manner that meets the quality, environmental, health and safety objectives and targets set out by the management.
• Coordinating with authorities, clients and vendors.
• Preparation of shop drawings and as-built drawings.
• Candidate must possess at least a Bachelor's Degree in Civil Engineering recognised by Professional Engineers Board (PEB).

• Client Communication:Interacting with clients to understand their needs and address inquiries.
  Providing assistance and guidance to clients regarding products or services.
  
• Problem Resolution:Resolving customer issues or concerns efficiently and effectively.
  Collaborating with other departments to address complex problems.
  
• Account Management:Managing and maintaining client accounts.
  Updating account information and ensuring accuracy.
  
• Product or Service Knowledge:Developing a deep understanding of the company's products or services.
  Staying informed about updates or changes to products/services.
  
• Training and Onboarding:Assisting clients in the onboarding process.
  Providing training and support to clients on using the company's products or services.
  
• Documentation:Maintaining accurate and up-to-date records of client interactions.
  Documenting issues and resolutions for future reference.
  
• Cross-functional Collaboration:Collaborating with sales, marketing, and other departments to ensure a unified approach in serving clients.
  Sharing client feedback and insights with relevant teams.
  
• Feedback Collection:Gathering feedback from clients to identify areas for improvement.
  Conveying client feedback to the appropriate departments.
  
• Policy Adherence:Ensuring that clients adhere to company policies and procedures.
  Addressing any non-compliance issues in a professional manner.
  
• Upselling and Cross-Selling:Identifying opportunities for upselling or cross-selling additional products or services to existing clients.
  
• Technology Proficiency:Using and understanding relevant software or tools for account management and support.
  
• Bilingual in Tamil and Bangladeshi

Job Descriptions:

Coordinate and responsible for the planning, execution and evaluation of programmes and ensure smooth running of daily operations of the department, which includes:

• Outreach and engagement of seniors within service boundary
• Active ageing programme
• Befriending and Buddying
• Care and support services

To liaise with external agencies, organisations, donors, volunteers etc. to tap on external resources and / or publicise programmes. You will need to provide information and referral services to clients.

DUTIES AND RESPONSIBILITIES

1. Programme Planning and Implementation

• Develop and implement outreach plan to seniors.
• Develop and implement annual calendar plan of social and health activities for seniors.
• Ensure that the programmes and activities meet the performance indicators and operating guidelines issued by Agency for Integrated Care, administration of the CSQ, half-yearly progress report on the programmes and services, outcome management, etc.
• Conduct needs assessment survey if necessary.
• Initiate a case record file for every elderly household in the identified block and capture the needs of the seniors.
• Establish and motivate seniors to be active, healthy, interdependent and purposeful.
• Ensure that the activities and programmes of the centre promote a community climate of multi-racial tolerance, harmony and cooperation among residents.
• Network with other agencies to establish additional avenues of help for the welfare of the seniors.

2. Alert Alarm System

• Oversee and manage the Alert Alarm System (AAS) during the centre’s operating hours, rendering assistance when necessary.
• Establish a system to manage the AAS outside operating hours and ensures that help continues to be available when needed, including a system of recalling staff outside operating hours.

3. Volunteer Development

• Establish networks with local community-based services/ resources, such as grassroots, social services, corporate organisations and schools, to engage volunteers to help run or assist in the programmes, start income-generating activities, conduct outreach efforts etc., to match the needs of seniors.
• Recruit, interview and screen potential volunteers.
• Provide and coordinate orientation of volunteers to their assigned role and the mission and objectives of the centre.
• Place volunteers to suitable positions and areas of need, such as administration of CSQ etc.
• Supervise and support volunteers.
• Establish a system of recognition for the volunteers.
• Review and evaluate the volunteer programme to ensure relevance and to meet future needs.
• Serve as the key communication link between the centre and its volunteers.

4. Finance and Accounts

• Manage the monthly petty cash utilization of the centre.
• Implement checks and controls in the accounting system to ensure proper accounting records and also to safeguard against misappropriation of the centre’s assets.

Job Requirements:

• Diploma in social service or related discipline, with a social service background.