Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Assists Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements
• Understand the contract and scope of work for topsides with sub-contractor
• Prepares key project documentation as per project specification requirements
• Manages project topsides related drawings and controls technical documentation across disciplines
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget
• Assists topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assists topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Supports topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Reviews the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull
• Co-ordinates between discipline to utilize the shared license based-on work priority;
• Monitors & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer
• Records & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager
• Expedites the information required by each discipline prior to start & complete the topsides design works
• Monitor 3D model clashing issues with other discipline
• Prepares Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM
• Assists topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering
• Minimum 10 years working experience in offshore oil and gas project managing topsides design works
• Able to liaise with internal and external parties
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

The PTO Lead Process Engineer leads new product introductions and the transfer of drug products to other facilities of moderate/high complexity independently and is a coach for his/her colleagues on the commercialization and manufacture of all drug products. He/ she typically will assume the responsibilities of a technical product steward and leads/supports all technical/ process activities (for example) investigations, validation and qualification processes, risk assessments and process safety management activities under his/ her responsibilities. The PTO Lead Process Engineer also leads/supports continuous process improvement activities to enhance site performance metrics and provides advanced/expert knowledge to the site and across our global technical network (while leveraging on other site experiences / knowledge) and continuously expands on personal expertise. He/ she will also provide technical supply support independently. The PTO Lead Process Engineer is expected to possess advanced/expert knowledge of at least one process/platform technology and supports the objectives of his/her seniors and the direct supervisor.

WHAT YOU WILL DO

MAIN RESPONSBILITIES

• Leads new product introductions to the site by conducting process and equipment comparisons, new raw materials introduction, development studies, clinical supplies manufacturing, cleaning processes development/ validation and training of technicians as required. Identifies and implements strategies for PPQ matrixing, novel technologies and new products etc. Authors PPQ protocols, reports and other associated documentation related to a new product introduction. Expected to have an advanced knowledge of product development, scale-up and technical transfer, key supporting documentation and associated regulatory requirements. Anticipates and remediates quality issues and challenges from the technology transfer process. Demonstrates advanced knowledge in technical writing for investigations, change request, PPQ reports and CMC sections.
• Leads and/or supports the design and execution of small/ full scale experiments using appropriate methodology and/or simulations for products/ processes to evaluate the impact of proposed changes to validated equipment/ processes.
• Proactively identify solutions independently to address issues that arose during experiment/ evaluation
• Leads/ provides technical guidance in support of site and divisional capital projects and new facility start-up activities. Ensures that the process design is well thought-out and robust for routine manufacturing. Provide technical input independently to the process design to ensure its fit for purpose for routine manufacturing. Responsible to transfer the knowledge of the project and facility to IPT colleagues.
• Provides technical expertise related to the product, equipment and manufacturing/cleaning processes in response to deviations/ product complaints/ adverse events to identify point of occurrence, root cause and corrective/ preventative actions. Demonstrates ability to lead and resolve complex technical issues and investigations and resolve with minimal supervision.
• Provides technical expertise for compliance activities such as audit and regulatory support. Acts as primary regulatory representative with business partners and regulatory agencies for moderately complex products/ programs/ issues.
• Manages product portfolio activities and is expected to manage a project team for activities associated with the product portfolio. Examples (but not limited to) include managing documentation updates (e.g. SOPs, batchsheets, recipes), quality risk assessments, change control management/ filing support (if applicable) and validation activities such as equipment qualification, simple process validation and cleaning validation/monitoring activities. Expected to have an advanced knowledge of respective compliance topics related to the above-mentioned activities. Demonstrates good project management skills (e.g. define core team and activities, project scheduling, stakeholder management and issues escalation etc), and demonstrates the ability to manage/ influence the project team.
• Supports routine supply manufacture by providing on going technical support to the IPT, participates in Tier processes and implements opportunities for improvement utilizing MPS (Our Production Systems) tools. Ensures optimum production runs, identifies constraints and non-conformances and troubleshoots to resolve complex issues in production systems. In addition, conceptualizes process designs to troubleshoot and resolve complex operational or manufacturing issues and recommend enhancements to improve production runs and enable the continuously improvement of the product cost structure.
• Manages and performs the proactive monitoring of the performance of process parameters, critical quality attributes and equipment/module(s)/unit operation(s) performance during manufacturing and cleaning. This could involve leading/participating in Prospective Process Analysis (PPA), statistical analysis and response to shifts and trends in process performance. Undertakes responsibilities as an active site product steward and is a member of the Value Chain Technical Team where applicable.
• In addition, leads Continued Process Verification and participates in Annual Product review activities as part of product lifecycle management. Applies moderately complex statistical and risk analysis tools to evaluate actions required to ensure product robustness across applicable manufacturing equipment and processes.
• Demonstrates advanced understanding of product CPP, CQA, Cpk and sterile boundary of the current validated processes. Has good knowledge of the raw materials and PCC (product contact components) used for the products under his/her responsibility.
• Actively participates and shows commitment to collaboration and sharing of best practices across the global S&T network. Typically possesses advanced and/or expert knowledge in at least one platform technology/ process.
• Complies with all divisional and site-specific policies, guidelines and procedures.
• Demonstrates and promotes Environmental, Health & Safety (EHS) leadership behaviors, ensuring that all activities are carried out in accordance with EHS requirements. Actively participates in GEMBA safety walks. Leads/ participates process hazards analyses (PHA) and applicable Process Safety Management (PSM) activities related to new/inline products.
• Where applicable, develops SOPs, gap analyses and procedures for Quality/EHS subsystems/ topics in compliance with regulatory requirements, divisional and corporate policies and guidelines. Typically possesses advanced and/or expert knowledge in at least one compliance topic.
• Demonstrates leadership behaviors in alignment with our leadership standards (Individual Contributor). Practices Inclusion as the How.
• Leads personal career development with manager assistance through annual Performance Management Process (PMP), Employee Development Plan (EDP) and career mapping.
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

Qualification:

• Bachelor's degree in a technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences

Experience:

• Minimum 5 to 10 years technical experience in related pharmaceutical manufacturing industry.
• Demonstrated capability to successfully lead teams in complex projects.
• Expert knowledge of core technology/unit operations relevant to active pharmaceutical ingredient, Biotech and/or Non-Sterile manufacturing.

Leadership, Professional and Functional Competencies

• Demonstrate leadership skills in alignment with our Leadership Standards, focusing on build talent, fostering collaboration and drive results.
• Effective communication skills, both oral and written. Ability to work effectively on cross- functional teams as a leader or a core member.
• Strong Leadership capabilities, with desire for active people development in the organization.

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Job Info:

• Basic: $3000 - $4000 + Phone Allowance + OT + Performance Bonus
• Working Hour: Monday - Friday (9am - 6pm)
• Location: Tampines

Job Scope:

• Take the lead on AV initiatives and provide input for project procurement
• Offer expert advice on project plans and layouts
• Assist in the procurement of AV hardware and software, ensuring project needs are met
• Plan, maintain, and monitor project timelines, intervening when necessary, and managing equipment storage and transportation
• Perform rack and stack, onsite installation, upgrades, troubleshooting, and repair of AV equipment, networking, and other in-house projects at customer premises
• Complete electrical wiring, trunking, programming, and basic construction setups (may require the use of a ladder)
• Manage, test, and commission CCTV, door access, ELV equipment, Bluetooth devices, and other necessary devices
• Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects
• Liaise with clients to understand their requirements
• Conduct quality control analysis prior to events
• Diagnose and resolve technical issues, both hardware and software, as needed
• Respond to service calls related to equipment breakdowns
• Provide on-site support and user training at end-users' premises.
• Ensure production and updating of documentation such as user guides, etc
• Follow up with the finance department regarding costing and billing

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Purpose Statement:

• Ensures reliability and mechanical integrity of equipment for processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance.
• Develops engineering solutions for repetitive failures and all other problems that adversely affect plant operations including capacity, quality, cost or regulatory compliance issues.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items

Major Responsibilities:

• Ensures reliability and maintainability of equipment, processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance
• Lead and drive mechanical integrity program in compliance with regulations
• Take a lead to troubleshoot equipment reliability issues and carryout RCFA for the repeated failures and failures that has an impact to production, quality and safety.
• Lead RCM studies for critical assets/systems and implement the action items generated.
• Run online/offline condition monitoring program site wide.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items.
• Works with project engineering teams to ensure reliability/ maintainability of new/modified installations.
• Perform analysis of asset performance including: Asset utilization, Overall equipment effectiveness, remaining useful life and capital replacement plans as well as other parameters that define Site MEP KPIs such as availability, maintenance performance, reliability and R&M costs of assets.
• Develop SOPs, equipment job aids, checklist to assure no equipment reliability issue after repair work.
• Evaluate content of maintenance plans in CMMS including methods, maintenance frequencies and spare parts needed

Qualifications:

Education

• A bachelor’s degree or a diploma in Mechanical engineering discipline.

Experience

• Mechanical engineering degree with at least 5 years work experience or a diploma with a minimum of 15 years of relevant work experience in pharmaceutical/ biological/ chemical/ oil & gas industries.
• Experience driving RCM studies and RCFA
• Experience/Knowledge in Asset Integrity Management
• Sound technical knowledge coupled with hands-on experience in maintenance of processing equipment

Skills

• Comfortable working in a team and matrix environments with high degree of initiative and self-motivation
• Scientific approach to solving problems and makes data-based decisions.
• Keen in driving and adopting new technologies.
• Knowledge of CMMS, Reliability, and proficiency in MS Office products (Excel, Outlook, PowerPoint, Word, Project)
• Knowledge on vibration analysis, RCM and RBI
• API 510/570/580 certification will be an added advantage
• Good written and oral communication skills
• Interpersonal skills and a "hands-on" attitude
• cGMP experience is a plus

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Position Overview: Customer Success Engineer provides technical support and ensures the success of our client's post-implementation. He/she is to be highly knowledgeable and skilled in all aspects of Tunity’s product architecture, showcasing individual expertise in software and adept knowledge of its integration with hardware. Acting as the technical contact point for our clients, he/she ensures a seamless and cohesive experience of service support for our clients.

Key Responsibilities:

• Product Expertise: Develop a deep understanding of Tunity's products, from software to hardware, to provide comprehensive support across our product and solution suite.

• Software Support: Provide expert software support, resolving issues swiftly at the root cause to maintain high levels of client satisfaction.

• Maintenance Management: Implement and manage software maintenance processes, actively monitoring and analysing activities to identify improvement areas, and managing preventative maintenance schedules.

• Solution Maintenance: Oversee the ongoing maintenance of software and platform solutions, ensuring they are current, optimized, and operating effectively within the client's infrastructure.

• Hardware Liaison: Collaborate closely with the hardware team, addressing hardware-related concerns, and providing timely resolutions to clients.

• Client Communication: Work in tandem with Customer Success Specialists in client engagements and communications, such as guiding clients on resolution processes, conducting training, participating in and contributing to client meetings, etc.

• Documentation and Analysis: Create and maintain technical documentation, conduct regular system performance and cost analysis, and prepare reports that inform strategic decisions.

• Technical Assessments and Implementation: Lead in-depth technical reviews and strategically recommend solutions to address client change requests, ensuring optimal outcomes and seamless integration of modifications. Implement and perform coding of the approved solution.

Qualifications:

· Tertiary qualification in Computer Science, Information System, Computer Engineering or a related field.

· At least 3 years of professional experience as a developer

· Proficiency in back-end development using Entity Framework, C#, .NET Core, .NET Framework, MS SQL, and RESTful Web API.

· Proficiency in front-end development using Angular 2+.

· Solid understanding of databases, both SQL and NoSQL.

· Experience with version control systems (e.g., Git).

· Knowledge of containerization and orchestration technologies (e.g., Docker, Kubernetes) is a plus.

· Knowledge of Single sign-on (SSO) (e.g Microsoft Entra ID, AWS IAM) via SAML/OAuth is a plus.

· Familiarity with cloud platforms (e.g., AWS, Azure, GCP) is a plus.

· Experience in Inventory Management System, Warehouse Management System and SAP is a plus.

· Excellent problem-solving and communication skills.

· Ability to work effectively in a collaborative team environment.

Duties & Responsibilities

• Prepare the equipment list
• Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
• Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries
• Prepare the requisition and RFQ documents for vendor enquiry
• Prepare the technical clarification and technical bid evaluation of vendor proposal
• Review and check the drawings, designs specification, materials and equipment from vendor for conformity with project technical requirements
• To liaise effectively with vendor and inter-departments to resolve engineering technical issue
• To resolve and response to client comment.
• Prepare information drawing for interface design work whenever is necessary
• Prepare bill of material for cost estimation of bid project
• Provide engineering support for the equipment installation and commissioning activities at site
• Provide engineering support for maintenance works.
• To carry out any other duties as and when assigned by the immediate supervisor or principle engineer

Qualification & Experience Generally Required

• Bachelor Degree in Mechanical Engineering or its equivalent
• Min. 1 to 2 years engineering knowledge in mechanical disciplines in Oil & Gas and Petrochemical industries.
• Experienced in equipment engineering specifications and standards
• Familiar with industrial standards and local codes
• Strong communication skills and the ability to stay organised and multi-task
• Proficient in using MS Word, Excel, Autocad

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

We are now seeking Field Service Engineers to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Performing on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation.
• Responding to requests for emergency repairs and services to troubleshoot equipment.
• Providing technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair, and maintenance at customer's sites, developing and further expand technical knowledge and expertise, currently recognized industry standards for engineering ability.
• Maintaining knowledge of applicable product line warranty and accomplish effective warranty administration.
• Planning, preparing and/or instructing both internal and external training programs as required, to impart and perpetuate field engineering and/or product knowledge in area of specialization.
• Providing leadership and technical direction to skilled labor performing work on customer sites.
• Maintaining strong safety mindset to assure the executed work reflects the technical requirements within NOV safety standards
• Preparing timely and accurate technical reports for customer records and a reference for future outages.

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand hydraulic schematics. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

VFlowTech is excited to offer a PhD scholarship under the Industrial Postgraduate Programme, a fully funded initiative by the Singapore Economic Development Board and Enterprise Singapore. This program provides aspiring researchers with the opportunity to address critical challenges in Vanadium Redox Flow Battery technology, focusing on mitigating shunt currents, reducing losses, and enhancing system reliability and efficiency. Candidates will be full-time employees of VFlowTech while pursuing their PhD at Newcastle University (UK).

The research project aims to develop a hybrid energy storage system (HESS) by integrating flow battery and lithium-ion battery technologies into a single microgrid solution. The candidate will contribute to hardware development and advanced control algorithm creation, optimizing performance, efficiency, and reliability. This prestigious program offers a unique opportunity to drive innovation in energy storage systems.

Key Responsibilities:

1) Design and Simulation of Hybrid Energy Storage System (HESS):

• Determine suitable battery chemistries and sizes for the HESS.
  • Conduct simulation tests and analyze initial results to ensure optimal design and functionality.

2) Development and testing of HESS Hardware:

• Implement and integrate the simulated HESS design into the physical hardware.
  • Conduct intensive testing and validation of the HESS prototype to ensure performance standards are met.

3) Development of Energy MAnagement System (EMS) Algorithm:

• Develop a hybrid EMS to control and optimize the use of both battery technologies.
  • Implement smart charge and discharge control logic to enhance system efficiency, reliability, safety, cost-effectiveness, lifespan, and overall power and energy density.
  • Utilize state-of-the-art AI techniques to develop advanced EMS algorithms for efficient energy management.

Qualifications:

- Academic Background:

• An Undergraduate or master’s degree in electrical engineering, Power Electronics, Energy Systems, or closely related field.
  • Strong academic record and research experience in relevant areas.

- Technical Skills:

• Proficiency in power electronics and energy storage system design.
  • Experience with battery management systems (BMS) and energy management systems (EMS).
  • Familiarity with simulation software and tools used in power and energy systems.

- Research and Development:

• Demonstrated experience in designing, simulating, and testing energy storage systems.
• Ability to conduct independent research and develop innovative solutions to complex problems.
  • Strong analytical and problem-solving skills.

- Soft Skills:

• Excellent written and verbal communication skills.
  • Ability to work collaboratively in a multidisciplinary team.
  • Strong organizational and project management skills.

Benefits:

• Opportunity to work on a pioneering project with significant real-world applications.
• Access to state-of-the-art research facilities and resources.
• Collaboration with leading experts in the field of energy storage and power electronics.
• Competitive salary and funding for research-related expenses.
• Work and earn a PhD degree simultaneously with no tuition fee.

Application Process:

Interested candidates should submit the following documents:

• A detailed CV highlighting relevant experience and skills.
• A cover letter explaining your motivation for applying and your research interests.
• Academic transcripts and certificates.
• Contact information for at least two academic or professional references.

Deadline:

Applications will be reviewed on a rolling basis until the position is filled. Early applications are encourage.

Contact:

For further information or to submit your application, please contact: h[email protected] and [email protected]

Join us in advancing the future of energy storage technology and making a significant impact on the efficiency and reliability of micro-grid systems!

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

The EOS/ASE Geodesy Group at NTU is searching for a Research Engineer II to work under the supervision of Prof Emma Hill on the role of tectonics in modifying regional relative sea level (RSL). The successful candidate will analyse geodetic data and conduct numerical modelling to estimate RSL related to past and future earthquakes and other processes of land-height change in Southeast Asia.

Further to this, they will work on projects aimed at effective communication of these results to policymakers and other stakeholders. They will investigate best practices for communicating probabilistic estimates of potential future impacts of earthquakes on RSL. The successful candidate will have a Bachelors’ degree in Earth Science, natural hazards, remote sensing, geodesy, computer science, data science, or a related subject. Most importantly they will have enthusiasm to engage in the research work of our group, and a passion for making Southeast Asia a safer and more sustainable place for all communities in the region.

Key Responsibilities:

• Analyze and interpret geodetic and remote sensing data from regional observing networks and satellites to further our understanding of land-height change in Southeast Asia.
• Conduct numerical modeling of tectonic processes, including to use numerical modeling techniques to model deformation resulting from viscoelastic deformation of the Earth’s asthenosphere.
• Conduct probabilistic analysis for potential future impacts of earthquakes on RSL.
• Conduct studies into best practices for communication of results on RSL from tectonics to policymakers and other key stakeholders, including discussion with these groups to learn their needs.

Job Requirements:

• Bachelor’s degree in Earth or environmental science.
• At least 4 years of experience working in an Earth science field.
• Demonstrated experience in geodetic data analysis and numerical modelling of tectonic deformation.
• Demonstrated experience conducting scientific research.
• Demonstrated ability to write and present at the level of peer-reviewed scientific journals and international conferences, which will usually be in English.
• Collaborative mindset and strong teamwork skills.
• Evidence of lead authorship of papers submitted or accepted into peer-reviewed journals would be a plus.

EOS seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability. Interested applicants should submit a CV and a statement of interests. Evaluation of application starts immediately until the position is filled. We regret to inform that only shortlisted candidates will be notified.

To apply, please submit a CV, cover letter, statement of research interests, and the names of three referees.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Overseeing projects at one or multiple stipulated sites.

• Assist project manager is the execution of the projects.

• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.

• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.

• Monitor and ensure progress of works are carried out according to project specification.

• Assist drafting team for design schematic drawing, layout drawing, P&ID drawing.

• Review and check drawing before submit to main contractor.

• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.

• Support project manager in the administration of contract, claim, variation and any dispute arise.

• Raise MR and order material & arrange manpower for necessary works.

• Advise site team for work schedule and technical issues.

• Make sure project is carried out according to schedule.

• Responsible for site supervision and implementation.

• Responsible for ensuring implementing safety measures.

Requirements:

- Minimum diploma

- 3 years or above experiences in ACMV, especially in air-conditioning industry

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B