Senior C&S Engineer

Working Days: 5 Days (Monday – Friday)
Working Hours: 8.30am – 6pm
Location: Near Ubi Mrt
Salary: $4000 - $6500

Job Scope:

• Civil & structure design, analysis and assessment for foundation, excavation, earth retaining structures, slope, instrumentation and site investigation.
• Plan, design, supervise & coordinate for civil structural engineering and infrastructure design and site works.
• Ensure all engineering works comply with all relevant statutory standards, regulations and codes of practice.
• Liaison with project stakeholders, clients other consultants, contractors and relevant authorities.
• Assist Team Leader in maintaining high-quality standards of design and supervision.

Requirements

• Bachelor of Engineering in civil and structural engineering recognised by PE Board.
• Minimum 5 years design experience in geotechnical and civil engineering projects in consulting firm.
• Well-versed in civil and structural design software.
• Familiar with authorities' submission requirements for engineering projects.
• Familiar with civil structural designs and BIM will be an advantage.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Planning Engineer x3

Salary range: $3500 - $5500
Working Days: Monday to Friday
Working Hours: 8am - 5.15pm
Office Location (HQ) : Paya Lebar
Current Project & Site Location: Tuas / Woodlands / Tengah / Sembawang / Tanjong Pagar

Roles & Responsibilities

• The Planning Engineer is responsible, but not limited to, the following:
• Provides cost estimations for temporary works and preliminaries.
• Prepares computer generated schedule programming (Primavera, MS Project, or others) to monitor the progress and substantiate time and cost entitlements.
• Prepares pre-tender, tender and contract programmes.
• Reviews tender and contract conditions so as to highlight onerous provisions, conflicts and discrepancies and to propose recommendations to mitigate risks.
• Monitors the progress of the construction programme and determines the delay events and their impacts.
• Prepares progress reports and progress audits.
• Prepares commissioning programmes.
• Prepares recovery programmes.
• Prepares baseline schedule which includes resource loading and progress.
• Keeps updated on the construction industry practices and standards and recommends ways to improve the planning and scheduling systems.
• Provides advice on post-contract claims, reviews, disputes, and litigation on programming.

Requirements:

• A bachelor’s degree in any Engineering discipline.
• Hands-on experience with Primavera and/or MS Project software is a requirement.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Planning Engineer x3

Salary range: $3500 - $5500
Working Days: Monday to Friday
Working Hours: 8am - 5.15pm
Office Location (HQ) : Paya Lebar
Current Project & Site Location: Tuas / Woodlands / Tengah / Sembawang / Tanjong Pagar...

Roles & Responsibilities

• The Planning Engineer is responsible, but not limited to, the following:
• Provides cost estimations for temporary works and preliminaries.
• Prepares computer generated schedule programming (Primavera, MS Project, or others) to monitor the progress and substantiate time and cost entitlements.
• Prepares pre-tender, tender and contract programmes.
• Reviews tender and contract conditions so as to highlight onerous provisions, conflicts and discrepancies and to propose recommendations to mitigate risks.
• Monitors the progress of the construction programme and determines the delay events and their impacts.
• Prepares progress reports and progress audits.
• Prepares commissioning programmes.
• Prepares recovery programmes.
• Prepares baseline schedule which includes resource loading and progress.
• Keeps updated on the construction industry practices and standards and recommends ways to improve the planning and scheduling systems.
• Provides advice on post-contract claims, reviews, disputes, and litigation on programming.

Requirements:

• A bachelor’s degree in any Engineering discipline.
• Hands-on experience with Primavera and/or MS Project software is a requirement.

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

Responsibilities

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

The TikTok Account team provides identity and access related services to TikTok and TikTok ecosystem businesses (Ecommerce, Business, Music, Live). We are building Account as a foundation service to empower business innovations.

As a product and platform team, we build robust and reliable systems to facilitate the company's various directions, also proactively facilitate user account access growth and security. We are facing engineering challenges across scalability, reliability, security and system performance, as well as a wide variety of business challenges.

On this team, you're a big-picture thinker and strategic team-player with a passion for doing what’s right.

Responsibilities:

1. Design, test, deploy and maintain backend services and core components of distributed systems.

2. Conduct system designs and code reviews.

3. Collaborate with other engineering teams to elevate technology and consistently apply best practices.

4. Constantly evaluate and improve efficiency, scalability, and stability of our systems.

Qualifications

Qualifications

1. BS or MS degree in Computer Science, Electrical Engineering, Computer Engineering or related areas.

2. 3+ years experience in one or more programming languages such as Go, Java, C++, Python etc.

3. Abilities to quickly ramp up on new technologies, tools and domain knowledge.

4. Experience in backend server development and database solutions.

5. Good problem-solving, analytical thinking capabilities and exceptional attention to details.

6. Good communication and collaboration skills.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Responsibilities

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible. Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day. To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve. Join us.

TikTok Live client team focus has been focusing on delivery engaging and the best live streaming experience to global users. Our team develop creative and interesting features for streamers and viewers to express themselves and interact with others instantly. We are looking for passionate mobile software engineers to join us in this fast growing industry. Responsibilities:

1. Design, implement the new-user features of our mobile application.

2. Collaborate with the design and product teams to create a world-class mobile experience.

3. Optimize mobile applications and user experience on the iOS platforms.

4. Promote robust and maintainable code, clear documentation, and deliver high quality work on a tight schedule.

Qualifications

1. BS/MS degree in Computer Science or equivalent majors with experience in native iOS development.

2. Proficiency in Objective-C or Swift.

3. Ability to understand and debug large and complex codebases.

4. Good team communication and collaboration skills.

5. Promote robust and maintainable code, clear documentation, and deliver high quality work on a tight schedule.

6. Livestream knowledge is a plus but not mandatory.

Preferred Qualification

Minimum 5 years relevant work experience from a large-scale internet business

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• Manage the tender team in preparation of technical submissions for tender and tender pre-qualification exercises.
• Evaluate tender documents and summarize critical information.
• Handle all documentation including method statements and other submissions.
• Address tender queries and monitor tender progress.
• Work closely with tender team, consultants, various government agencies and authorities to obtain necessary information to facilitate for tender submission.

Requirements:

• Degree in Civil Engineering (PE Board recognised)
• At least 8 years of experience working as a Technical Manager in Construction/Construction Management handling building projects in Singapore for mega projects.
• Hands on experience in reviewing of structural, architectural and M&E technical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Benefits Summary:

• Up to $3000
• 5 Days work week
• Working Location: Woodland

Responsibilities:

• Performing preventive maintenance on electrical forklifts
• Attend and perform on site repairs
• Responds to service requests
• Adheres to safety regulations and industry standards
• Other ad-hoc duties

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on WhatsApp for more details:

https://wa.me/6582693981

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Manufacturing Engineer
Working day: Monday - Friday
Working Hour: 8:30am - 6:15pm
Salary range: $2,500 - $4,000 (depend on experience)
Location: Woodlands

Job Responsibilities:

• Responsible for Setting up, Testing & Commissioning of Industrial Robotic/ Advanced automated machinery
• Ensure manufacturing processes adhere to safety regulations and industry standards.
• Provide hands-on technical support during assembly and final testing on the production floor.
• Collaborate with cross-functional teams, including production, quality, and R&D, to achieve manufacturing goals.
• Provide technical support to production teams, troubleshoot issues, and develop solutions to minimize downtime and defects.
• Work closely with technicians on machine assembly & Engineering department for design improvements & BOM.
• Implement quality control measures and work on process improvements to meet or exceed product quality standards
• Collaborate with product designers and engineers to ensure that products are designed for efficient and cost-effective manufacturing.
• Comprehend both 2D and 3D engineering drawings, manage and revise of BOM.
• Implement quality control measures and work on process improvements to meet or exceed product quality standards.

Job Requirement:

• Diploma in Mechanical Engineering / Mechatronics or a related field
• Minimum 2-3 years of relevant experience in Industrial Automation
• Previous experience in manufacturing engineering, process engineering, or a related field, with a strong understanding of manufacturing processes and technologies.
• Proficiency in CAD/CAM software and knowledge of manufacturing software tools.
• Familiarity with safety regulations and compliance standards relevant to the manufacturing industry.

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

• Perform Digital IC Verification and maintain verification environment for module and SOC level using UVM methodology.
• Create and debug test cases and Verification IP and write and review verification plan.
• Carry out assertion-based verification and code coverage analysis on module and SOC level.

Requirements:

• Degree in Electrical/Electronic Engineering
• At least 5 years of digital IC verification experience from design to tape-out
• Good understanding of system Verilog and UVM verification methodology
• Knowledge in connectivity technology and C programming language.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Data Center Operations designs, installs & maintains the world’s largest Cloud Computing Infrastructure. We are looking for skilled Continuous Improvement and Software Development Engineer with a passion for technology to help us expand our Cloud to the next level. Amazon Web Services (AWS) offers an exciting, dynamic and challenging environment encouraging creativity and personal development while maintaining AWS computing environments in a secure, scalable, and cost-effective manner.

To keep up with demand on both disk and network capacity, we continue to expand our Data Centers in every region. Also, our content delivery AWS service, CloudFront, has expanded its Data Centers presence by over 50% worldwide in the last 12 months and are expecting to increase by a similar number over the next 12 months. This requires talented people to build & manage. We hope it is you!

At Amazon, career progression is part of our environment. We want you to progress. If your career path is in Systems, Network or Database Engineering, Software Development or maybe AWS Support, Technical Operations or perhaps Project Management, we will create a development plan to enable you to succeed reaching those goals. This begins on Day One! Come and work for the world’s most Customer Centric Company.

This role is a unique opportunity to work in some of the most cutting edge data centers in the world. Amazon data centers are large-scale high-density centers where you will be working on changing the face of Cloud technology in the region.

A n OE Process Engineer (Software Development) may be the primary point of contact for both internal customers (for example: Network Engineers, Systems Engineers, Software Developers, Database Engineers, Technical Operations) and external customers (Hardware Vendors, Contractors, Service Providers among others).

You will be working with various stakeholders to identify waste and working with teams to reduce/eliminate these wastes through standardization, innovation and simplification. Developing software applications would be one of the key tools used to advance operational excellence within the teams.


Here are some reasons you should come work with us:

• You will be given the opportunity to work in all facets of the operations, giving you a comprehensive understanding of the business climate
• You will get the opportunity to work closely with a great team
• You will understand what it takes to grow and operate a global business at our scale.
• You will handle the complete software development lifecycle; defining, prioritising, designing, building, and testing new features

Basic qualifications

• Equivalent experience to a Bachelor's degree based on 3 years of work experience for every 1 year of education
• 4+ years professional experience in software development
• Understanding of Lean/Six Sigma principles & Operational Excellence
• Have an eye for detail and flair for waste reduction
• Suggest & develop tools to reduce efforts and improve operational efficiencies using lean tools and software development skills
• Computer Science fundamentals in object-oriented design, data structures
• Computer Science fundamentals in algorithm design, problem solving, and complexity analysis
• Proficiency in, at least, one or more of C++, Python, or Java.
• Expertise in current computer hardware and software
• Ability to use one or more development language (Java, Ruby, HTML, JavaScript, CSS etc.)
• Familiarity with web services, distributed systems, asynchronous messaging, and network protocols
• Strong communication skills
• Analytical experience

• Handle all customers’ technical issues related to specifications, quality, etc.
• Develop new accounts and grow the market shares of existing customers.
• Perform product training and presentation to customers.
• Prepare and submit proposal and report proposal status on weekly sales meeting.

Requirements:

• Diploma in Mechanical, Chemical, Electrical Engineering.
• At least 2 years of solution sales experience in Water Treatment/Pump Industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

About Select Investors:

Select Investors aims to be the most respected and trusted Wealth Management Practice in Singapore, providing first-class holistic tax, wealth and succession advice by engaging, inspiring and delighting our clients.

Select Investors is a division with St. James’s Place Wealth Management.

About St. James’s Place Wealth Management

• An award-winning, FTSE 100 company founded in 1991
• Managing SGD250 billion clients’ funds under management
• Managing in excess of 800,000 clients

Description of the role:

This role will see the successful candidate working closely with a Partner, they will be responsible for performing a variety of duties to assist the Partner in delivering outstanding wealth management services to an array of affluent and high-net-worth clients.

Key Responsibilities

• Drafting client letters and client information packs
• Monitoring payments and liaising with UK payments team
• Managing end to end process of client onboarding
• Working with various other internal teams including client services team, business assurance and compliance
• Preparing for client meetings, including compilation of graphs, basic calculations and analysis.
• Processing switch documents
• Updating Salesforce with meeting notes and activities
• Obtaining insurance quotes
• Preparing paperwork for client meetings, including compilation of graphs. basic calculations, analysis and draft commentary
• Managing and coordinating daily tasks, outstanding matters, and reporting requirements
• Communicating with clients via email and maintaining strong customer service
• Supporting Partner with all administrative functions and support as required

Job Requirements

• 5 to 10 years of relevant work experience in financial industry, with basic understanding of investments and fund knowledge
• Excellent attention to detail, with strong planning and organising skills
• Ability to take initiative and work independently
• Good English communication skills – including written and verbal
• A team player with can-do attitude

• Responsible for RTL design, simulation, and verification for ASIC/SoC products.
• Identify internal and external requirements, PPA study, RTL coding, implementation and work closely with backend team.
• Create reusable internal IPs for AI and/or in-memory computing products.
• Handle IP integration and validation and support post-Si testing and validation.

​

Requirements:

• Degree in Electrical Engineering or equivalent
• At least 5 years of RTL/SoC/digital design with pre-layout simulation and post-layout simulation experience.
• Strong knowledge with Verilog and system Verilog, VCS, Verdi or other industry standard tools.
• Familiarity with AMBA APB AXI Protocol, RISC/Arm or other core architectures.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for Equipment Uptime, Productivity and CIP.
• Work in a cleanroom environment for long hours.
• In-charge of PM planning, Equipment Maintenance, and Parts Management.
• Co-work with Engineer to resolve equipment/line issues.
• To improve and enhance machine performance and upgrade machine capability.
• Perform any other duties as assigned.

Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Electrical / Electronic / Mechanical), or equivalent.
• Proficiency in Microsoft Office.
• Ability to work independently as well as in a team.
• At least 2 years of relevant working experience in manufacturing environment.
• Fresh graduates are also encouraged to apply.
• Ability to communicate in Chinese is a plus due to Chinese speaking environment.

We are currently assisting our client, a global technology, defence and engineering group, look for a Technical Project Manager

Responsibilities

• Manage all aspects of the technical project to ensure it is completed on time, within budget and meet all contractual requirements
• Lead and manage the project team
• Able to interpret the contract and extract all essential information with the project team for the efficient and effective management of the project to meet its objectives
• Identify all contractual system requirements and all other deliverables and responsible for managing system designs, reviews and all deliverables.
• Analyze and define all project materials and service purchases based on cost optimization and appropriate risk management
• Perform day to day coordination, risk management, liaison, control and supervision of resources including all project team members, sub-contractors, internal and external project related parties and customers to ensure that the project meets its objectives
• Provide regular project reports/updates to customers, internal departments and management
• Monitor all payment milestones to ensure timely billing in accordance to the planned scheduled

Requirements

• Degree in Electrical, Electronics, Communications Engineering, or equivalent
• Minimum 5 years in technical project management work experience
• Experience in New Product Introduction management is preferred
• Strong project & people management skills.
• Excellent communication and problem solving abilities
• Able to work within tight schedules
• Self driven and good team player

• Overall responsible for technical operations of the assigned oil tankers.
• Ensure that the vessels achieve the necessary technical standards and performance.
• Manage the vessels certificates and documents to ensure they are systematically updated and stored.
• Prepare and manage vessels’ technical budget and monitor dry-dockings and other required repairs and maintenance jobs.

Requirements:

• Chief Engineer or Second Engineer (COC Class 1/Class 2)
• At least 2 years of experience as Technical Superintendent for Oil tankers.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

-providing strategic leadership and direction for a department or organization. They formulate and implement policies, set goals, and make key decisions. Directors manage resources efficiently, supervise teams, and ensure alignment with overall objectives. Communication with stakeholders, fostering innovation, and adapting to industry changes are crucial aspects.

-Directors also play a pivotal role in shaping the organizational culture and representing the company externally. The specific duties can vary based on the industry and the type of organization.

• Act within their powers. ...
• Promote the success of the company. ...
• Exercise independent judgement. ...
• Exercise reasonable care, skill and diligence. ...
• Avoid conflicts of interest. ...
• Not accept benefits from third parties. ...

• Responsible for Equipment Uptime, Productivity and CIP.
• Work in a cleanroom environment for long hours.
• In-charge of PM planning, Equipment Maintenance, and Parts Management.
• Co-work with Engineer to resolve equipment/line issues.
• To improve and enhance machine performance and upgrade machine capability.
• Perform any other duties as assigned.

Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Electrical / Electronic / Mechanical), or equivalent.
• Proficiency in Microsoft Office.
• Ability to work independently as well as in a team.
• At least 2 years of relevant working experience in manufacturing environment.
• Fresh graduates are also encouraged to apply.
• Ability to communicate in Chinese is a plus due to Chinese speaking environment.

Technical Sales Engineer/ Product Sales Engineer

Location: Bukit Batok

Working Days: 5 Days

Working hours : 9am - 6pm

Salary : SGD2,200-3,500 (not inclusive of transport allowance, bonus/commission)

Job Responsibilities:

• Develop a thorough understanding of our complete range of product
• Responsible for preparing quotations, proposal according to customers' requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Industry: Electrical & Electronics

Requirement:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/
• Passion for automation, with creative and adaptive approaches

Skills

• PLC programmable logic controller programming, touch panel, Control And Automation

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

view more jobs www.blueboxjobs.com

________________________________________________________________

Ensures reliability and maintainability of equipment, processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance.

Develops engineering solutions to repetitive failures and all other problems that adversely affect plant operations including capacity, quality, cost or regulatory compliance issues.

Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items

Major Responsibilities:

Ensures reliability and maintainability of equipment, processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance.

Assists in the development of improved Reliability strategies/program using with a view of process safety, yields, capacity and uptime performance.

Provides technical support in Reliability issues and assists in trouble shooting process or equipment issues. Carryout RCFA for the repeated failures and failures that has an impact to production, quality and safety.

Develops engineering solutions to repetitive failures and all other problems that adversely affect plant operations including capacity, quality, cost or regulatory compliance issues.

Perform RCM (Reliability-Centered Maintenance) for all critical assets/systems using RCM software and implement the action items generated from RCM.

Run online/offline condition monitoring program site wide and predict the failures early.

Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability)

improvement activities, both reactive and proactive, and assists in implementation and follow-up of action items.

Provides inputs to a risk management plan that will anticipate reliability-related and non-reliabilityrelated risks that could adversely impact plant operations.

Perform analysis of asset performance including Asset utilization, Overall equipment effectiveness, remaining useful life and capital replacement plans as well as other parameters that define Site MEP

KPIs such as availability, maintenance performance, reliability and R&M costs of assets.

Evaluate content of maintenance plans in CMMS including methods, maintenance frequencies and spare parts needed.

Gate keeper for the review, implementing and follow up for the Local Authority related assets.

Examples are the MOM’s statutory pressure vessels, SCDF’s P&FM equipment, etc.

Any other duties as assigned by Supervisor/Manager

Education

A bachelor’s degree or a diploma in Mechanical engineering discipline.

Experience

Mechanical engineering degree with at least 3 years work experience or a diploma with a minimum of 10 years of relevant work experience in pharmaceutical/ biological/ chemical/ oil & gas industries.

3-5 years of reliability experience driving RCM studies and RCFA

Technical knowledge coupled with hands-on experience in maintenance of processing equipment.

Skills

Comfortable working in a team and matrix environments; high degree of initiative and self-motivation

Scientific approach to solving problems; makes data-based decisions.

Keen in driving and adopting new technologies.

Knowledge of CMMS, Reliability, and proficiency in MS Office products (Excel, Outlook, PowerPoint, Word, Project).

Knowledge on vibration analysis, RCM and RBI

Good written and oral communication skills

Interpersonal skills and a "hands-on" attitude

cGMP experience is a plus

The Software Engineer responsibilities includes:

- verify and debug software codes.

- understand customer's operations and modify robot's applications to suit customer's needs.

The candidate should be diploma / degree holder and:

- Possess knowledge of C#, C++, C++.Net, Visual Basic.net, Visual C#, Visual Studio.net, etc.

- Possess robotics or automation related knowledge would have an advantage.

- Able to work under pressure.

- Able to work in clean room when necessary.

- Able to converse in Chinese in order to communicate with Taiwan HQ effectively.

- Candidates without experience are welcome.

- Occasional travel when necessary.

The engineer shall report to the Lead Engineer, who will provide assistance and guidance.

The job exposes the candidate to work in a small organisation, flexible work location, and interaction with Taiwan counterparts.

Job Descriptions

• Maintaining and administering the networks environments including hardware, and configurations.
• Performing disaster recovery operations and data backups when required.
• Protecting data, software, and hardware by coordinating, planning and implementing network security measures.
• Troubleshooting, diagnosing and resolving hardware, software, and network problems.
• Replacing faulty network hardware components when required.
• Monitoring network performance to determine if adjustments need to be made.
• Coordinating computer network access and use.
• Administer, and troubleshoot network infrastructure devices, including wireless access points, firewall, routers, switches, controllers.
• Responding to inquiries from users, IT peers, vendors and to provide technical assistance and support.
• Ensure control and compliance for the systems and servers related are available to only authorize users which follows policies and SOPs closely.
• Attending audit meetings and ensure proper documentation of all work done.
• Vendor management
• Establish/maintains customer relationship with partners or internal users to ensure complete understanding of business processes to enable the delivery of viable Infrastructure solution.
• Provide PABX support based on Client’s SOP and documentation
• Attending to machine faults related to network problems during office and after office hours.

Job Requirements:

• 3-4 years of network
• Network security
• HPE network
• Wifi knowledge (Aruba or Cisco)
• Fortigate, Palo, or Cisco firewall experience
• Megapop and SD-WAN knowledge
• Work with vendors
• Networking best practices
• PABX knowledge (will be good)

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E • EA License No. 01C4394

• Reg. <R1548745> <Teoh Shiau Swang>

Position title : Mechanical Process Engineer

• Working Days: 5 days (Mon-Fri)
• Working hours: 9am – 6pm (Flexible working hours)
• Location: WFH, NORTH BRIDGE
  

Responsibilities:

• Modifications to existing automation software (Siemens and similar) and to a smaller degree software for Rockwell.
• Creating new programmes for company system processes with transportation mechanical plants and developments.
• Quality checking equipment and software provided by subcontractors at plant manufacturers in South East Asia (and elsewhere as needed).
• Quality checking of electrical and pneumatic diagrams and equipment.
• Full FAT of plant equipment at the manufacturers before shipping and responsible for immediate reporting of all types of mistakes and errors to company with no delay and implement corrections in production during FAT test and reporting to company with all details before shipment of the turn-key projects.
• Installation/ commissioning and start up at the customers´site.
• Heavily involvement in commissioning/start-up, troubleshooting with the company during the work, optimization of large machinery/equipment systems world-wide but primarily in Singapore, US & Europe
• Trouble-shooting existing plants by phone/video with the subcontractors
• Support sales by reviewing specifications and customer requirements

Requirements:

• Diploma in Mechanical Engineering and above
• Willing to travel for up to estimated 90-150 days a year and more when production and sales are increasing. Project assignments overseas is mostly for 1 - 3 weeks per project only.
• Responsibility for all drawings on the base of draft or oral design ideas of company of skids-based solutions, pressure vessels and storage tanks, material handling and new developments, both drawings and corrections for production purposes and for sales purposes.
• Quality checking of received mechanical documentation from subcontractors.
• Preparation of mechanical documentation for the individual projects.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

​Our Client is an established company in Singapore, who is seeking to recruit a Software Engineer (Microservices).

Software Engineer (Microservices)

Key Responsibilities

• Design and develop the hub platform based on architecture and solution.
• Apply agile development approach to the delivery of the software.
• Use software design and coding best practices in the software development.
• Design and develop software application based on microservice and container approach.
• Automate testing and ensure code quality.
• Work with teams across different domains and manage stakeholders at Director level.

Idle Experience to have

• 5+ years’ experience in the field of IT/telecommunication and software related development
• Knowledge of microservice architecture and design
• Understand the automated Development Pipeline, with their toolset
• Understand the overall telecom environment – BSS/OSS, telco services, and their challenges
• Development of large-scale software, in the software development role
• Proven experience in managing multiple stakeholders, at Director level
• Lead technical teams
• Good interpersonal and negotiation skill, working independently is essential
• Enterprise Architecture, DevOps, such as TDD practices and tools for CI/CD, Containers and cloud deployment experience good to have

JJ Consulting Services

EA Licence No.: 12C6207

Applicants are invited to send in a MS Word resume to [email protected] stating position applying for/present/expected salaries and earliest available date.

We thank all applicants in advance and regret that only short listed candidates will be notified.

At Magnite, we cultivate an environment of continuous growth and collaboration. Our work impacts what millions of people read, watch, and buy, and we’re looking for people to help us tackle that responsibility with creativity and focus.

Magnite (NASDAQ: MGNI) is the world’s largest independent sell-side advertising platform.

Publishers use our technology to monetize their content across all screens and formats including streaming, online video, display, and audio. Our tech fuels billions of transactions per day!

The Technical Operations team is responsible for providing technical expertise and support to Magnite's publisher partners as well as support demand clients and partner DSPs.

In this role you will:

• Provide in-depth technical support to publishers and partners for on all Magnite platforms
• Participate in publisher sales process as requested by the revenue team
• Coordinate with new publisher clients for quick and efficient publisher on-boarding, testing, around and implementation of supply set-up
• Provide proactive recommendations to publishers to maximize revenue achievement on the Magnite platforms
• Provide on-going trouble-shooting and training to clients as needed
• Collate relevant evidence, insights and data to build comprehensive information for the engineers to make adjustments
• Coordinate with the SSP product team client recommendations and priorities to ensure that Magnite’s platform remains best in class and exceeds the needs of our publishers
• Work alongside demand team to identify and troubleshoot buy-side issues and recommending solutions
• Be an integral member of the team, who works towards the common goal of helping our publishers to be successful in the programmatic space, and in turn generating maximum revenue for Magnite
• Maintain and develop internal tools to help automate tasks and simplify reporting

We’re looking for someone with:

• 4+ years digital experience in a technical operations capacity
• Solid grasp of ad-serving/DSP/SSP space
• Good understanding of industry standards, including OpenRTB, VAST, VPAID
• Strong customer service and able to simplify complex technical requirements in writing and verbally
• The ability to train and teach clients
• A commitment to Magnite and client revenue growth
• Experience with development and BI tools preferred